| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Remove devm_gpio_request() due to lack of users.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250531212331.3635269-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
With the introduction of CAN XL, a new can_xl_tdc_is_enabled() helper
function will be introduced later on. Rename can_tdc_is_enabled() into
can_fd_tdc_is_enabled() to make it more explicit that this helper is
meant for CAN FD.
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://patch.msgid.link/20241112165118.586613-11-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
With the introduction of CAN XL, a new CAN_CTRLMODE_XL_TDC_MASK will
be introduced later on. Because CAN_CTRLMODE_TDC_MASK is not part of
the uapi, rename it to CAN_CTRLMODE_FD_TDC_MASK to make it more
explicit that this mask is meant for CAN FD.
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://patch.msgid.link/20241112165118.586613-10-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
This implements the core of the series and causes the verifier to fall
back to mitigating Spectre v1 using speculation barriers. The approach
was presented at LPC'24 [1] and RAID'24 [2].
If we find any forbidden behavior on a speculative path, we insert a
nospec (e.g., lfence speculation barrier on x86) before the instruction
and stop verifying the path. While verifying a speculative path, we can
furthermore stop verification of that path whenever we encounter a
nospec instruction.
A minimal example program would look as follows:
A = true
B = true
if A goto e
f()
if B goto e
unsafe()
e: exit
There are the following speculative and non-speculative paths
(`cur->speculative` and `speculative` referring to the value of the
push_stack() parameters):
- A = true
- B = true
- if A goto e
- A && !cur->speculative && !speculative
- exit
- !A && !cur->speculative && speculative
- f()
- if B goto e
- B && cur->speculative && !speculative
- exit
- !B && cur->speculative && speculative
- unsafe()
If f() contains any unsafe behavior under Spectre v1 and the unsafe
behavior matches `state->speculative &&
error_recoverable_with_nospec(err)`, do_check() will now add a nospec
before f() instead of rejecting the program:
A = true
B = true
if A goto e
nospec
f()
if B goto e
unsafe()
e: exit
Alternatively, the algorithm also takes advantage of nospec instructions
inserted for other reasons (e.g., Spectre v4). Taking the program above
as an example, speculative path exploration can stop before f() if a
nospec was inserted there because of Spectre v4 sanitization.
In this example, all instructions after the nospec are dead code (and
with the nospec they are also dead code speculatively).
For this, it relies on the fact that speculation barriers generally
prevent all later instructions from executing if the speculation was not
correct:
* On Intel x86_64, lfence acts as full speculation barrier, not only as
a load fence [3]:
An LFENCE instruction or a serializing instruction will ensure that
no later instructions execute, even speculatively, until all prior
instructions complete locally. [...] Inserting an LFENCE instruction
after a bounds check prevents later operations from executing before
the bound check completes.
This was experimentally confirmed in [4].
* On AMD x86_64, lfence is dispatch-serializing [5] (requires MSR
C001_1029[1] to be set if the MSR is supported, this happens in
init_amd()). AMD further specifies "A dispatch serializing instruction
forces the processor to retire the serializing instruction and all
previous instructions before the next instruction is executed" [8]. As
dispatch is not specific to memory loads or branches, lfence therefore
also affects all instructions there. Also, if retiring a branch means
it's PC change becomes architectural (should be), this means any
"wrong" speculation is aborted as required for this series.
* ARM's SB speculation barrier instruction also affects "any instruction
that appears later in the program order than the barrier" [6].
* PowerPC's barrier also affects all subsequent instructions [7]:
[...] executing an ori R31,R31,0 instruction ensures that all
instructions preceding the ori R31,R31,0 instruction have completed
before the ori R31,R31,0 instruction completes, and that no
subsequent instructions are initiated, even out-of-order, until
after the ori R31,R31,0 instruction completes. The ori R31,R31,0
instruction may complete before storage accesses associated with
instructions preceding the ori R31,R31,0 instruction have been
performed
Regarding the example, this implies that `if B goto e` will not execute
before `if A goto e` completes. Once `if A goto e` completes, the CPU
should find that the speculation was wrong and continue with `exit`.
If there is any other path that leads to `if B goto e` (and therefore
`unsafe()`) without going through `if A goto e`, then a nospec will
still be needed there. However, this patch assumes this other path will
be explored separately and therefore be discovered by the verifier even
if the exploration discussed here stops at the nospec.
This patch furthermore has the unfortunate consequence that Spectre v1
mitigations now only support architectures which implement BPF_NOSPEC.
Before this commit, Spectre v1 mitigations prevented exploits by
rejecting the programs on all architectures. Because some JITs do not
implement BPF_NOSPEC, this patch therefore may regress unpriv BPF's
security to a limited extent:
* The regression is limited to systems vulnerable to Spectre v1, have
unprivileged BPF enabled, and do NOT emit insns for BPF_NOSPEC. The
latter is not the case for x86 64- and 32-bit, arm64, and powerpc
64-bit and they are therefore not affected by the regression.
According to commit a6f6a95f2580 ("LoongArch, bpf: Fix jit to skip
speculation barrier opcode"), LoongArch is not vulnerable to Spectre
v1 and therefore also not affected by the regression.
* To the best of my knowledge this regression may therefore only affect
MIPS. This is deemed acceptable because unpriv BPF is still disabled
there by default. As stated in a previous commit, BPF_NOSPEC could be
implemented for MIPS based on GCC's speculation_barrier
implementation.
* It is unclear which other architectures (besides x86 64- and 32-bit,
ARM64, PowerPC 64-bit, LoongArch, and MIPS) supported by the kernel
are vulnerable to Spectre v1. Also, it is not clear if barriers are
available on these architectures. Implementing BPF_NOSPEC on these
architectures therefore is non-trivial. Searching GCC and the kernel
for speculation barrier implementations for these architectures
yielded no result.
* If any of those regressed systems is also vulnerable to Spectre v4,
the system was already vulnerable to Spectre v4 attacks based on
unpriv BPF before this patch and the impact is therefore further
limited.
As an alternative to regressing security, one could still reject
programs if the architecture does not emit BPF_NOSPEC (e.g., by removing
the empty BPF_NOSPEC-case from all JITs except for LoongArch where it
appears justified). However, this will cause rejections on these archs
that are likely unfounded in the vast majority of cases.
In the tests, some are now successful where we previously had a
false-positive (i.e., rejection). Change them to reflect where the
nospec should be inserted (using __xlated_unpriv) and modify the error
message if the nospec is able to mitigate a problem that previously
shadowed another problem (in that case __xlated_unpriv does not work,
therefore just add a comment).
Define SPEC_V1 to avoid duplicating this ifdef whenever we check for
nospec insns using __xlated_unpriv, define it here once. This also
improves readability. PowerPC can probably also be added here. However,
omit it for now because the BPF CI currently does not include a test.
Limit it to EPERM, EACCES, and EINVAL (and not everything except for
EFAULT and ENOMEM) as it already has the desired effect for most
real-world programs. Briefly went through all the occurrences of EPERM,
EINVAL, and EACCESS in verifier.c to validate that catching them like
this makes sense.
Thanks to Dustin for their help in checking the vendor documentation.
[1] https://lpc.events/event/18/contributions/1954/ ("Mitigating
Spectre-PHT using Speculation Barriers in Linux eBPF")
[2] https://arxiv.org/pdf/2405.00078 ("VeriFence: Lightweight and
Precise Spectre Defenses for Untrusted Linux Kernel Extensions")
[3] https://www.intel.com/content/www/us/en/developer/articles/technical/software-security-guidance/technical-documentation/runtime-speculative-side-channel-mitigations.html
("Managed Runtime Speculative Execution Side Channel Mitigations")
[4] https://dl.acm.org/doi/pdf/10.1145/3359789.3359837 ("Speculator: a
tool to analyze speculative execution attacks and mitigations" -
Section 4.6 "Stopping Speculative Execution")
[5] https://www.amd.com/content/dam/amd/en/documents/processor-tech-docs/programmer-references/software-techniques-for-managing-speculation.pdf
("White Paper - SOFTWARE TECHNIQUES FOR MANAGING SPECULATION ON AMD
PROCESSORS - REVISION 5.09.23")
[6] https://developer.arm.com/documentation/ddi0597/2020-12/Base-Instructions/SB--Speculation-Barrier-
("SB - Speculation Barrier - Arm Armv8-A A32/T32 Instruction Set
Architecture (2020-12)")
[7] https://wiki.raptorcs.com/w/images/5/5f/OPF_PowerISA_v3.1C.pdf
("Power ISA™ - Version 3.1C - May 26, 2024 - Section 9.2.1 of Book
III")
[8] https://www.amd.com/content/dam/amd/en/documents/processor-tech-docs/programmer-references/40332.pdf
("AMD64 Architecture Programmer’s Manual Volumes 1–5 - Revision 4.08
- April 2024 - 7.6.4 Serializing Instructions")
Signed-off-by: Luis Gerhorst <luis.gerhorst@fau.de>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Henriette Herzog <henriette.herzog@rub.de>
Cc: Dustin Nguyen <nguyen@cs.fau.de>
Cc: Maximilian Ott <ott@cs.fau.de>
Cc: Milan Stephan <milan.stephan@fau.de>
Link: https://lore.kernel.org/r/20250603212428.338473-1-luis.gerhorst@fau.de
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This is made to clarify that this flag will cause a nospec to be added
after this insn and can therefore be relied upon to reduce speculative
path analysis.
Signed-off-by: Luis Gerhorst <luis.gerhorst@fau.de>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Cc: Henriette Herzog <henriette.herzog@rub.de>
Cc: Maximilian Ott <ott@cs.fau.de>
Cc: Milan Stephan <milan.stephan@fau.de>
Link: https://lore.kernel.org/r/20250603212024.338154-1-luis.gerhorst@fau.de
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This changes the semantics of BPF_NOSPEC (previously a v4-only barrier)
to always emit a speculation barrier that works against both Spectre v1
AND v4. If mitigation is not needed on an architecture, the backend
should set bpf_jit_bypass_spec_v4/v1().
As of now, this commit only has the user-visible implication that unpriv
BPF's performance on PowerPC is reduced. This is the case because we
have to emit additional v1 barrier instructions for BPF_NOSPEC now.
This commit is required for a future commit to allow us to rely on
BPF_NOSPEC for Spectre v1 mitigation. As of this commit, the feature
that nospec acts as a v1 barrier is unused.
Commit f5e81d111750 ("bpf: Introduce BPF nospec instruction for
mitigating Spectre v4") noted that mitigation instructions for v1 and v4
might be different on some archs. While this would potentially offer
improved performance on PowerPC, it was dismissed after the following
considerations:
* Only having one barrier simplifies the verifier and allows us to
easily rely on v4-induced barriers for reducing the complexity of
v1-induced speculative path verification.
* For the architectures that implemented BPF_NOSPEC, only PowerPC has
distinct instructions for v1 and v4. Even there, some insns may be
shared between the barriers for v1 and v4 (e.g., 'ori 31,31,0' and
'sync'). If this is still found to impact performance in an
unacceptable way, BPF_NOSPEC can be split into BPF_NOSPEC_V1 and
BPF_NOSPEC_V4 later. As an optimization, we can already skip v1/v4
insns from being emitted for PowerPC with this setup if
bypass_spec_v1/v4 is set.
Vulnerability-status for BPF_NOSPEC-based Spectre mitigations (v4 as of
this commit, v1 in the future) is therefore:
* x86 (32-bit and 64-bit), ARM64, and PowerPC (64-bit): Mitigated - This
patch implements BPF_NOSPEC for these architectures. The previous
v4-only version was supported since commit f5e81d111750 ("bpf:
Introduce BPF nospec instruction for mitigating Spectre v4") and
commit b7540d625094 ("powerpc/bpf: Emit stf barrier instruction
sequences for BPF_NOSPEC").
* LoongArch: Not Vulnerable - Commit a6f6a95f2580 ("LoongArch, bpf: Fix
jit to skip speculation barrier opcode") is the only other past commit
related to BPF_NOSPEC and indicates that the insn is not required
there.
* MIPS: Vulnerable (if unprivileged BPF is enabled) -
Commit a6f6a95f2580 ("LoongArch, bpf: Fix jit to skip speculation
barrier opcode") indicates that it is not vulnerable, but this
contradicts the kernel and Debian documentation. Therefore, I assume
that there exist vulnerable MIPS CPUs (but maybe not from Loongson?).
In the future, BPF_NOSPEC could be implemented for MIPS based on the
GCC speculation_barrier [1]. For now, we rely on unprivileged BPF
being disabled by default.
* Other: Unknown - To the best of my knowledge there is no definitive
information available that indicates that any other arch is
vulnerable. They are therefore left untouched (BPF_NOSPEC is not
implemented, but bypass_spec_v1/v4 is also not set).
I did the following testing to ensure the insn encoding is correct:
* ARM64:
* 'dsb nsh; isb' was successfully tested with the BPF CI in [2]
* 'sb' locally using QEMU v7.2.15 -cpu max (emitted sb insn is
executed for example with './test_progs -t verifier_array_access')
* PowerPC: The following configs were tested locally with ppc64le QEMU
v8.2 '-machine pseries -cpu POWER9':
* STF_BARRIER_EIEIO + CONFIG_PPC_BOOK32_64
* STF_BARRIER_SYNC_ORI (forced on) + CONFIG_PPC_BOOK32_64
* STF_BARRIER_FALLBACK (forced on) + CONFIG_PPC_BOOK32_64
* CONFIG_PPC_E500 (forced on) + STF_BARRIER_EIEIO
* CONFIG_PPC_E500 (forced on) + STF_BARRIER_SYNC_ORI (forced on)
* CONFIG_PPC_E500 (forced on) + STF_BARRIER_FALLBACK (forced on)
* CONFIG_PPC_E500 (forced on) + STF_BARRIER_NONE (forced on)
Most of those cobinations should not occur in practice, but I was not
able to get an PPC e6500 rootfs (for testing PPC_E500 without forcing
it on). In any case, this should ensure that there are no unexpected
conflicts between the insns when combined like this. Individual v1/v4
barriers were already emitted elsewhere.
Hari's ack is for the PowerPC changes only.
[1] https://gcc.gnu.org/git/?p=gcc.git;a=commit;h=29b74545531f6afbee9fc38c267524326dbfbedf
("MIPS: Add speculation_barrier support")
[2] https://github.com/kernel-patches/bpf/pull/8576
Signed-off-by: Luis Gerhorst <luis.gerhorst@fau.de>
Acked-by: Hari Bathini <hbathini@linux.ibm.com>
Cc: Henriette Herzog <henriette.herzog@rub.de>
Cc: Maximilian Ott <ott@cs.fau.de>
Cc: Milan Stephan <milan.stephan@fau.de>
Link: https://lore.kernel.org/r/20250603211703.337860-1-luis.gerhorst@fau.de
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
JITs can set bpf_jit_bypass_spec_v1/v4() if they want the verifier to
skip analysis/patching for the respective vulnerability. For v4, this
will reduce the number of barriers the verifier inserts. For v1, it
allows more programs to be accepted.
The primary motivation for this is to not regress unpriv BPF's
performance on ARM64 in a future commit where BPF_NOSPEC is also used
against Spectre v1.
This has the user-visible change that v1-induced rejections on
non-vulnerable PowerPC CPUs are avoided.
For now, this does not change the semantics of BPF_NOSPEC. It is still a
v4-only barrier and must not be implemented if bypass_spec_v4 is always
true for the arch. Changing it to a v1 AND v4-barrier is done in a
future commit.
As an alternative to bypass_spec_v1/v4, one could introduce NOSPEC_V1
AND NOSPEC_V4 instructions and allow backends to skip their lowering as
suggested by commit f5e81d111750 ("bpf: Introduce BPF nospec instruction
for mitigating Spectre v4"). Adding bpf_jit_bypass_spec_v1/v4() was
found to be preferable for the following reason:
* bypass_spec_v1/v4 benefits non-vulnerable CPUs: Always performing the
same analysis (not taking into account whether the current CPU is
vulnerable), needlessly restricts users of CPUs that are not
vulnerable. The only use case for this would be portability-testing,
but this can later be added easily when needed by allowing users to
force bypass_spec_v1/v4 to false.
* Portability is still acceptable: Directly disabling the analysis
instead of skipping the lowering of BPF_NOSPEC(_V1/V4) might allow
programs on non-vulnerable CPUs to be accepted while the program will
be rejected on vulnerable CPUs. With the fallback to speculation
barriers for Spectre v1 implemented in a future commit, this will only
affect programs that do variable stack-accesses or are very complex.
For PowerPC, the SEC_FTR checking in bpf_jit_bypass_spec_v4() is based
on the check that was previously located in the BPF_NOSPEC case.
For LoongArch, it would likely be safe to set both
bpf_jit_bypass_spec_v1() and _v4() according to
commit a6f6a95f2580 ("LoongArch, bpf: Fix jit to skip speculation
barrier opcode"). This is omitted here as I am unable to do any testing
for LoongArch.
Hari's ack concerns the PowerPC part only.
Signed-off-by: Luis Gerhorst <luis.gerhorst@fau.de>
Acked-by: Hari Bathini <hbathini@linux.ibm.com>
Cc: Henriette Herzog <henriette.herzog@rub.de>
Cc: Maximilian Ott <ott@cs.fau.de>
Cc: Milan Stephan <milan.stephan@fau.de>
Link: https://lore.kernel.org/r/20250603211318.337474-1-luis.gerhorst@fau.de
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
One of key items in mprog API is revision for prog list. The revision
number will be increased if the prog list changed, e.g., attach, detach
or replace.
Add 'revisions' field to struct cgroup_bpf, representing revisions for
all cgroup related attachment types. The initial revision value is
set to 1, the same as kernel mprog implementations.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250606163136.2428732-1-yonghong.song@linux.dev
|
|
The Intel i40e, iavf, and ice drivers all include a definition of the
packet classifier filter types used to program RSS hash enable bits. For
i40e, these bits are used for both the PF and VF to configure the PFQF_HENA
and VFQF_HENA registers.
For ice and iAVF, these bits are used to communicate the desired hash
enable filter over virtchnl via its struct virtchnl_rss_hashena. The
virtchnl.h header makes no mention of where the bit definitions reside.
Maintaining a separate copy of these bits across three drivers is
cumbersome. Move the definition to libie as a new pctype.h header file.
Each driver can include this, and drop its own definition.
The ice implementation also defined a ICE_AVF_FLOW_FIELD_INVALID, intending
to use this to indicate when there were no hash enable bits set. This is
confusing, since the enumeration is using bit positions. A value of 0
*should* indicate the first bit. Instead, rewrite the code that uses
ICE_AVF_FLOW_FIELD_INVALID to just check if the avf_hash is zero. From
context this should be clear that we're checking if none of the bits are
set.
The values are kept as bit positions instead of encoding the BIT_ULL
directly into their value. While most users will simply use BIT_ULL
immediately, i40e uses the macros both with BIT_ULL and test_bit/set_bit
calls.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
i40e, ice, and iAVF all use 'hena' as a shorthand for the "hash enable"
configuration. This comes originally from the X710 datasheet 'xxQF_HENA'
registers. In the context of the registers the meaning is fairly clear.
However, on its own, hena is a weird name that can be more difficult to
understand. This is especially true in ice. The E810 hardware doesn't even
have registers with HENA in the name.
Replace the shorthand 'hena' with 'hashcfg'. This makes it clear the
variables deal with the Hash configuration, not just a single boolean
on/off for all hashing.
Do not update the register names. These come directly from the datasheet
for X710 and X722, and it is more important that the names can be searched.
Suggested-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Some system owners use slab_debug=FPZ (or similar) as a hardening option,
but do not want to be forced into having kernel addresses exposed due
to the implicit "no_hash_pointers" boot param setting.[1]
Introduce the "hash_pointers" boot param, which defaults to "auto"
(the current behavior), but also includes "always" (forcing on hashing
even when "slab_debug=..." is defined), and "never". The existing
"no_hash_pointers" boot param becomes an alias for "hash_pointers=never".
This makes it possible to boot with "slab_debug=FPZ hash_pointers=always".
Link: https://github.com/KSPP/linux/issues/368 [1]
Fixes: 792702911f58 ("slub: force on no_hash_pointers when slub_debug is enabled")
Co-developed-by: Sergio Perez Gonzalez <sperezglz@gmail.com>
Signed-off-by: Sergio Perez Gonzalez <sperezglz@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: David Rientjes <rientjes@google.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Acked-by: Rafael Aquini <raquini@redhat.com>
Tested-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://patch.msgid.link/20250415170232.it.467-kees@kernel.org
[kees@kernel.org: Add note about hash_pointers into slab_debug kernel parameter documentation.]
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
As per the spec, one 32 bit reserved entry is missing here, add it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Fixes: 910cc1acc9b4 ("firmware: arm_ffa: Add support for passing UUID in FFA_MSG_SEND2")
Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com>
Message-Id: <28a624fbf416975de4fbe08cfbf7c2db89cb630e.1748948911.git.viresh.kumar@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
ADCs as ad7606 implement a phase calibration as a delay. Add such
definition, needed for ad7606.
Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250606-wip-bl-ad7606-calibration-v9-2-6e014a1f92a2@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add iio backend support for number of lanes to be enabled.
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Link: https://patch.msgid.link/20250516082630.8236-4-antoniu.miclaus@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add backend support for staring the capture synchronization.
When activated, it initates a proccess that aligns the sample's most
significant bit (MSB) based solely on the captured data, without
considering any other external signals.
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Link: https://patch.msgid.link/20250516082630.8236-3-antoniu.miclaus@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add backend support for digital filter type selection.
This setting can be adjusted within the IP cores interfacing devices.
The IP core can be configured based on the state of the actual
digital filter configuration of the part.
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Link: https://patch.msgid.link/20250516082630.8236-2-antoniu.miclaus@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer cleanup from Thomas Gleixner:
"The delayed from_timer() API cleanup:
The renaming to the timer_*() namespace was delayed due massive
conflicts against Linux-next. Now that everything is upstream finish
the conversion"
* tag 'timers-cleanups-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
treewide, timers: Rename from_timer() to timer_container_of()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Thomas Gleixner:
"Add the missing seq_file forward declaration in the timer namespace
header"
* tag 'timers-urgent-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timens: Add struct seq_file forward declaration
|
|
Pull mount fixes from Al Viro:
"Various mount-related bugfixes:
- split the do_move_mount() checks in subtree-of-our-ns and
entire-anon cases and adapt detached mount propagation selftest for
mount_setattr
- allow clone_private_mount() for a path on real rootfs
- fix a race in call of has_locked_children()
- fix move_mount propagation graph breakage by MOVE_MOUNT_SET_GROUP
- make sure clone_private_mnt() caller has CAP_SYS_ADMIN in the right
userns
- avoid false negatives in path_overmount()
- don't leak MNT_LOCKED from parent to child in finish_automount()
- do_change_type(): refuse to operate on unmounted/not ours mounts"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
do_change_type(): refuse to operate on unmounted/not ours mounts
clone_private_mnt(): make sure that caller has CAP_SYS_ADMIN in the right userns
selftests/mount_setattr: adapt detached mount propagation test
do_move_mount(): split the checks in subtree-of-our-ns and entire-anon cases
fs: allow clone_private_mount() for a path on real rootfs
fix propagation graph breakage by MOVE_MOUNT_SET_GROUP move_mount(2)
finish_automount(): don't leak MNT_LOCKED from parent to child
path_overmount(): avoid false negatives
fs/fhandle.c: fix a race in call of has_locked_children()
|
|
Move this API to the canonical timer_*() namespace.
[ tglx: Redone against pre rc1 ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Add support for the EXPORT_SYMBOL_GPL_FOR_MODULES() macro, which
exports a symbol only to specified modules
- Improve ABI handling in gendwarfksyms
- Forcibly link lib-y objects to vmlinux even if CONFIG_MODULES=n
- Add checkers for redundant or missing <linux/export.h> inclusion
- Deprecate the extra-y syntax
- Fix a genksyms bug when including enum constants from *.symref files
* tag 'kbuild-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (28 commits)
genksyms: Fix enum consts from a reference affecting new values
arch: use always-$(KBUILD_BUILTIN) for vmlinux.lds
kbuild: set y instead of 1 to KBUILD_{BUILTIN,MODULES}
efi/libstub: use 'targets' instead of extra-y in Makefile
module: make __mod_device_table__* symbols static
scripts/misc-check: check unnecessary #include <linux/export.h> when W=1
scripts/misc-check: check missing #include <linux/export.h> when W=1
scripts/misc-check: add double-quotes to satisfy shellcheck
kbuild: move W=1 check for scripts/misc-check to top-level Makefile
scripts/tags.sh: allow to use alternative ctags implementation
kconfig: introduce menu type enum
docs: symbol-namespaces: fix reST warning with literal block
kbuild: link lib-y objects to vmlinux forcibly even when CONFIG_MODULES=n
tinyconfig: enable CONFIG_LD_DEAD_CODE_DATA_ELIMINATION
docs/core-api/symbol-namespaces: drop table of contents and section numbering
modpost: check forbidden MODULE_IMPORT_NS("module:") at compile time
kbuild: move kbuild syntax processing to scripts/Makefile.build
Makefile: remove dependency on archscripts for header installation
Documentation/kbuild: Add new gendwarfksyms kABI rules
Documentation/kbuild: Drop section numbers
...
|
|
Move the inner part of the arch_resume_nosmt() code into a separate
function called arch_cpu_rescan_dead_smt_siblings(), so it can be
used in other places where "dead" SMT siblings may need to be taken
online and offline again in order to get into deep idle states.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Tested-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Link: https://patch.msgid.link/3361688.44csPzL39Z@rjwysocki.net
[ rjw: Prevent build issues with CONFIG_SMP unset ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"13 hotfixes.
6 are cc:stable and the remainder address post-6.15 issues or aren't
considered necessary for -stable kernels. 11 are for MM"
* tag 'mm-hotfixes-stable-2025-06-06-16-02' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
kernel/rcu/tree_stall: add /sys/kernel/rcu_stall_count
MAINTAINERS: add mm swap section
kmsan: test: add module description
MAINTAINERS: add tlb trace events to MMU GATHER AND TLB INVALIDATION
mm/hugetlb: fix huge_pmd_unshare() vs GUP-fast race
mm/hugetlb: unshare page tables during VMA split, not before
MAINTAINERS: add Alistair as reviewer of mm memory policy
iov_iter: use iov_offset for length calculation in iov_iter_aligned_bvec
mm/mempolicy: fix incorrect freeing of wi_kobj
alloc_tag: handle module codetag load errors as module load failures
mm/madvise: handle madvise_lock() failure during race unwinding
mm: fix vmstat after removing NR_BOUNCE
KVM: s390: rename PROT_NONE to PROT_TYPE_DUMMY
|
|
Intention for MNT_LOCKED had always been to protect the internal
mountpoints within a subtree that got copied across the userns boundary,
not the mountpoint that tree got attached to - after all, it _was_
exposed before the copying.
For roots of secondary copies that is enforced in attach_recursive_mnt() -
MNT_LOCKED is explicitly stripped for those. For the root of primary
copy we are almost always guaranteed that MNT_LOCKED won't be there,
so attach_recursive_mnt() doesn't bother. Unfortunately, one call
chain got overlooked - triggering e.g. NFS referral will have the
submount inherit the public flags from parent; that's fine for such
things as read-only, nosuid, etc., but not for MNT_LOCKED.
This is particularly pointless since the mount attached by finish_automount()
is usually expirable, which makes any protection granted by MNT_LOCKED
null and void; just wait for a while and that mount will go away on its own.
Include MNT_LOCKED into the set of flags to be ignored by do_add_mount() - it
really is an internal flag.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Fixes: 5ff9d8a65ce8 ("vfs: Lock in place mounts from more privileged users")
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for the FWFT SBI extension, which is part of SBI 3.0 and a
dependency for many new SBI and ISA extensions
- Support for getrandom() in the VDSO
- Support for mseal
- Optimized routines for raid6 syndrome and recovery calculations
- kexec_file() supports loading Image-formatted kernel binaries
- Improvements to the instruction patching framework to allow for
atomic instruction patching, along with rules as to how systems need
to behave in order to function correctly
- Support for a handful of new ISA extensions: Svinval, Zicbop, Zabha,
some SiFive vendor extensions
- Various fixes and cleanups, including: misaligned access handling,
perf symbol mangling, module loading, PUD THPs, and improved uaccess
routines
* tag 'riscv-for-linus-6.16-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (69 commits)
riscv: uaccess: Only restore the CSR_STATUS SUM bit
RISC-V: vDSO: Wire up getrandom() vDSO implementation
riscv: enable mseal sysmap for RV64
raid6: Add RISC-V SIMD syndrome and recovery calculations
riscv: mm: Add support for Svinval extension
RISC-V: Documentation: Add enough title underlines to CMODX
riscv: Improve Kconfig help for RISCV_ISA_V_PREEMPTIVE
MAINTAINERS: Update Atish's email address
riscv: uaccess: do not do misaligned accesses in get/put_user()
riscv: process: use unsigned int instead of unsigned long for put_user()
riscv: make unsafe user copy routines use existing assembly routines
riscv: hwprobe: export Zabha extension
riscv: Make regs_irqs_disabled() more clear
perf symbols: Ignore mapping symbols on riscv
RISC-V: Kconfig: Fix help text of CMDLINE_EXTEND
riscv: module: Optimize PLT/GOT entry counting
riscv: Add support for PUD THP
riscv: xchg: Prefetch the destination word for sc.w
riscv: Add ARCH_HAS_PREFETCH[W] support with Zicbop
riscv: Add support for Zicbop
...
|
|
Pull more block updates from Jens Axboe:
- NVMe pull request via Christoph:
- TCP error handling fix (Shin'ichiro Kawasaki)
- TCP I/O stall handling fixes (Hannes Reinecke)
- fix command limits status code (Keith Busch)
- support vectored buffers also for passthrough (Pavel Begunkov)
- spelling fixes (Yi Zhang)
- MD pull request via Yu:
- fix REQ_RAHEAD and REQ_NOWAIT IO err handling for raid1/10
- fix max_write_behind setting for dm-raid
- some minor cleanups
- Integrity data direction fix and cleanup
- bcache NULL pointer fix
- Fix for loop missing write start/end handling
- Decouple hardware queues and IO threads in ublk
- Slew of ublk selftests additions and updates
* tag 'block-6.16-20250606' of git://git.kernel.dk/linux: (29 commits)
nvme: spelling fixes
nvme-tcp: fix I/O stalls on congested sockets
nvme-tcp: sanitize request list handling
nvme-tcp: remove tag set when second admin queue config fails
nvme: enable vectored registered bufs for passthrough cmds
nvme: fix implicit bool to flags conversion
nvme: fix command limits status code
selftests: ublk: kublk: improve behavior on init failure
block: flip iter directions in blk_rq_integrity_map_user()
block: drop direction param from bio_integrity_copy_user()
selftests: ublk: cover PER_IO_DAEMON in more stress tests
Documentation: ublk: document UBLK_F_PER_IO_DAEMON
selftests: ublk: add stress test for per io daemons
selftests: ublk: add functional test for per io daemons
selftests: ublk: kublk: decouple ublk_queues from ublk server threads
selftests: ublk: kublk: move per-thread data out of ublk_queue
selftests: ublk: kublk: lift queue initialization out of thread
selftests: ublk: kublk: tie sqe allocation to io instead of queue
selftests: ublk: kublk: plumb q_id in io_uring user_data
ublk: have a per-io daemon instead of a per-queue daemon
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt changes for 6.16-rc1.
Included in here are the following:
- USB offload support for audio devices.
I think this takes the record for the most number of patch series
(30+) over the longest period of time (2+ years) to get merged
properly.
Many props go to Wesley Cheng for seeing this effort through, they
took a major out-of-tree hacked-up-monstrosity that was created by
multiple vendors for their specific devices, got it all merged into
a semi-coherent set of changes, and got all of the different major
subsystems to agree on how this should be implemented both with
changes to their code as well as userspace apis, AND wrangled the
hardware companies into agreeing to go forward with this, despite
making them all redo work they had already done in their private
device trees.
This feature offers major power savings on embedded devices where a
USB audio stream can continue to flow while the rest of the system
is sleeping, something that devices running on battery power really
care about. There are still some more small tweaks left to be done
here, and those patches are still out for review and arguing among
the different hardware companies, but this is a major step forward
and a great example of how to do upstream development well.
- small number of thunderbolt fixes and updates, things seem to be
slowing down here (famous last words...)
- xhci refactors and reworking to try to handle some rough corner
cases in some hardware implementations where things don't always
work properly
- typec driver updates
- USB3 power management reworking and updates
- Removal of some old and orphaned UDC gadget drivers that had not
been used in a very long time, dropping over 11 thousand lines from
the tree, always a nice thing, making up for the 12k lines added
for the USB offload feature.
- lots of little updates and fixes in different drivers
All of these have been in linux-next for over 2 weeks, the USB offload
logic has been in there for 8 weeks now, with no reported issues"
* tag 'usb-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (172 commits)
ALSA: usb-audio: qcom: fix USB_XHCI dependency
ASoC: qdsp6: fix compile-testing without CONFIG_OF
usb: misc: onboard_usb_dev: fix build warning for CONFIG_USB_ONBOARD_DEV_USB5744=n
usb: typec: tipd: fix typo in TPS_STATUS_HIGH_VOLAGE_WARNING macro
USB: typec: fix const issue in typec_match()
USB: gadget: udc: fix const issue in gadget_match_driver()
USB: gadget: fix up const issue with struct usb_function_instance
USB: serial: pl2303: add new chip PL2303GC-Q20 and PL2303GT-2AB
USB: serial: bus: fix const issue in usb_serial_device_match()
usb: usbtmc: Fix timeout value in get_stb
usb: usbtmc: Fix read_stb function and get_stb ioctl
ALSA: qc_audio_offload: try to reduce address space confusion
ALSA: qc_audio_offload: avoid leaking xfer_buf allocation
ALSA: qc_audio_offload: rename dma/iova/va/cpu/phys variables
ALSA: usb-audio: qcom: Fix an error handling path in qc_usb_audio_probe()
usb: misc: onboard_usb_dev: Fix usb5744 initialization sequence
dt-bindings: usb: ti,usb8041: Add binding for TI USB8044 hub controller
usb: misc: onboard_usb_dev: Add support for TI TUSB8044 hub
usb: gadget: lpc32xx_udc: Use USB API functions rather than constants
usb: gadget: epautoconf: Use USB API functions rather than constants
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial updates from Greg KH:
"Here is the big set of tty and serial driver changes for 6.16-rc1.
A little more churn than normal in this portion of the kernel for this
development cycle, Jiri and Nicholas were busy with cleanups and
reviews and fixes for the vt unicode handling logic which composed
most of the overall work in here.
Major changes are:
- vt unicode changes/reverts/changes from Nicholas. This should help
out a lot with screen readers and others that rely on vt console
support
- lock guard additions to the core tty/serial code to clean up lots
of error handling logic
- 8250 driver updates and fixes
- device tree conversions to yaml
- sh-sci driver updates
- other small cleanups and updates for serial drivers and tty core
portions
All of these have been in linux-next for 2 weeks with no reported issues"
* tag 'tty-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (105 commits)
tty: serial: 8250_omap: fix TX with DMA for am33xx
vt: add VT_GETCONSIZECSRPOS to retrieve console size and cursor position
vt: bracketed paste support
vt: remove VT_RESIZE and VT_RESIZEX from vt_compat_ioctl()
vt: process the full-width ASCII fallback range programmatically
vt: make use of ucs_get_fallback() when glyph is unavailable
vt: add ucs_get_fallback()
vt: create ucs_fallback_table.h_shipped with gen_ucs_fallback_table.py
vt: introduce gen_ucs_fallback_table.py to create ucs_fallback_table.h
vt: move glyph determination to a separate function
vt: make sure displayed double-width characters are remembered as such
vt: ucs.c: fix misappropriate in_range() usage
serial: max3100: Replace open-coded parity calculation with parity8()
dt-bindings: serial: 8250_omap: Drop redundant properties
dt-bindings: serial: Convert socionext,milbeaut-usio-uart to DT schema
dt-bindings: serial: Convert microchip,pic32mzda-uart to DT schema
dt-bindings: serial: Convert arm,sbsa-uart to DT schema
dt-bindings: serial: Convert snps,arc-uart to DT schema
dt-bindings: serial: Convert marvell,armada-3700-uart to DT schema
dt-bindings: serial: Convert lantiq,asc to DT schema
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc / iio driver updates from Greg KH:
"Here is the big char/misc/iio and other small driver subsystem pull
request for 6.16-rc1.
Overall, a lot of individual changes, but nothing major, just the
normal constant forward progress of new device support and cleanups to
existing subsystems. Highlights in here are:
- Large IIO driver updates and additions and device tree changes
- Android binder bugfixes and logfile fixes
- mhi driver updates
- comedi driver updates
- counter driver updates and additions
- coresight driver updates and additions
- echo driver removal as there are no in-kernel users of it
- nvmem driver updates
- spmi driver updates
- new amd-sbi driver "subsystem" and drivers added
- rust miscdriver binding documentation fix
- other small driver fixes and updates (uio, w1, acrn, hpet,
xillybus, cardreader drivers, fastrpc and others)
All of these have been in linux-next for quite a while with no
reported problems"
* tag 'char-misc-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (390 commits)
binder: fix yet another UAF in binder_devices
counter: microchip-tcb-capture: Add watch validation support
dt-bindings: iio: adc: Add ROHM BD79100G
iio: adc: add support for Nuvoton NCT7201
dt-bindings: iio: adc: add NCT7201 ADCs
iio: chemical: Add driver for SEN0322
dt-bindings: trivial-devices: Document SEN0322
iio: adc: ad7768-1: reorganize driver headers
iio: bmp280: zero-init buffer
iio: ssp_sensors: optimalize -> optimize
HID: sensor-hub: Fix typo and improve documentation
iio: admv1013: replace redundant ternary operator with just len
iio: chemical: mhz19b: Fix error code in probe()
iio: adc: at91-sama5d2: use IIO_DECLARE_BUFFER_WITH_TS
iio: accel: sca3300: use IIO_DECLARE_BUFFER_WITH_TS
iio: adc: ad7380: use IIO_DECLARE_DMA_BUFFER_WITH_TS
iio: adc: ad4695: rename AD4695_MAX_VIN_CHANNELS
iio: adc: ad4695: use IIO_DECLARE_DMA_BUFFER_WITH_TS
iio: introduce IIO_DECLARE_BUFFER_WITH_TS macros
iio: make IIO_DMA_MINALIGN minimum of 8 bytes
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Thomas Bogendoerfer:
- Added support for EcoNet platform
- Added support for parallel CPU bring up on EyeQ
- Other cleanups and fixes
* tag 'mips_6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (23 commits)
MIPS: loongson2ef: lemote-2f: add missing function prototypes
MIPS: loongson2ef: cs5536: add missing function prototypes
MIPS: SMP: Move the AP sync point before the calibration delay
mips: econet: Fix incorrect Kconfig dependencies
MAINTAINERS: Add entry for newly added EcoNet platform.
mips: dts: Add EcoNet DTS with EN751221 and SmartFiber XP8421-B board
dt-bindings: vendor-prefixes: Add SmartFiber
mips: Add EcoNet MIPS platform support
dt-bindings: mips: Add EcoNet platform binding
MIPS: bcm63xx: nvram: avoid inefficient use of crc32_le_combine()
mips: dts: pic32: pic32mzda: Rename the sdhci nodename to match with common mmc-controller binding
MIPS: SMP: Move the AP sync point before the non-parallel aware functions
MIPS: Replace strcpy() with strscpy() in vpe_elfload()
MIPS: BCM63XX: Replace strcpy() with strscpy() in board_prom_init()
mips: ptrace: Improve code formatting and indentation
MIPS: SMP: Implement parallel CPU bring up for EyeQ
mips: Add -std= flag specified in KBUILD_CFLAGS to vdso CFLAGS
MIPS: Loongson64: Add missing '#interrupt-cells' for loongson64c_ls7a
mips: dts: realtek: Add MDIO controller
MIPS: txx9: gpio: use new line value setter callbacks
...
|
|
Currently, __split_vma() triggers hugetlb page table unsharing through
vm_ops->may_split(). This happens before the VMA lock and rmap locks are
taken - which is too early, it allows racing VMA-locked page faults in our
process and racing rmap walks from other processes to cause page tables to
be shared again before we actually perform the split.
Fix it by explicitly calling into the hugetlb unshare logic from
__split_vma() in the same place where THP splitting also happens. At that
point, both the VMA and the rmap(s) are write-locked.
An annoying detail is that we can now call into the helper
hugetlb_unshare_pmds() from two different locking contexts:
1. from hugetlb_split(), holding:
- mmap lock (exclusively)
- VMA lock
- file rmap lock (exclusively)
2. hugetlb_unshare_all_pmds(), which I think is designed to be able to
call us with only the mmap lock held (in shared mode), but currently
only runs while holding mmap lock (exclusively) and VMA lock
Backporting note:
This commit fixes a racy protection that was introduced in commit
b30c14cd6102 ("hugetlb: unshare some PMDs when splitting VMAs"); that
commit claimed to fix an issue introduced in 5.13, but it should actually
also go all the way back.
[jannh@google.com: v2]
Link: https://lkml.kernel.org/r/20250528-hugetlb-fixes-splitrace-v2-1-1329349bad1a@google.com
Link: https://lkml.kernel.org/r/20250528-hugetlb-fixes-splitrace-v2-0-1329349bad1a@google.com
Link: https://lkml.kernel.org/r/20250527-hugetlb-fixes-splitrace-v1-1-f4136f5ec58a@google.com
Fixes: 39dde65c9940 ("[PATCH] shared page table for hugetlb page")
Signed-off-by: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org> [b30c14cd6102: hugetlb: unshare some PMDs when splitting VMAs]
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Failures inside codetag_load_module() are currently ignored. As a result
an error there would not cause a module load failure and freeing of the
associated resources. Correct this behavior by propagating the error code
to the caller and handling possible errors. With this change, error to
allocate percpu counters, which happens at this stage, will not be ignored
and will cause a module load failure and freeing of resources. With this
change we also do not need to disable memory allocation profiling when
this error happens, instead we fail to load the module.
Link: https://lkml.kernel.org/r/20250521160602.1940771-1-surenb@google.com
Fixes: 10075262888b ("alloc_tag: allocate percpu counters for module tags dynamically")
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reported-by: Casey Chen <cachen@purestorage.com>
Closes: https://lore.kernel.org/all/20250520231620.15259-1-cachen@purestorage.com/
Cc: Daniel Gomez <da.gomez@samsung.com>
Cc: David Wang <00107082@163.com>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Luis Chamberalin <mcgrof@kernel.org>
Cc: Petr Pavlu <petr.pavlu@suse.com>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/alexghiti/linux into for-next
riscv patches for 6.16-rc1, part 2
* Performance improvements
- Add support for vdso getrandom
- Implement raid6 calculations using vectors
- Introduce svinval tlb invalidation
* Cleanup
- A bunch of deduplication of the macros we use for manipulating instructions
* Misc
- Introduce a kunit test for kprobes
- Add support for mseal as riscv fits the requirements (thanks to Lorenzo for making sure of that :))
[Palmer: There was a rebase between part 1 and part 2, so I've had to do
some more git surgery here... at least two rounds of surgery...]
* alex-pr-2: (866 commits)
RISC-V: vDSO: Wire up getrandom() vDSO implementation
riscv: enable mseal sysmap for RV64
raid6: Add RISC-V SIMD syndrome and recovery calculations
riscv: mm: Add support for Svinval extension
riscv: Add kprobes KUnit test
riscv: kprobes: Remove duplication of RV_EXTRACT_ITYPE_IMM
riscv: kprobes: Remove duplication of RV_EXTRACT_UTYPE_IMM
riscv: kprobes: Remove duplication of RV_EXTRACT_RD_REG
riscv: kprobes: Remove duplication of RVC_EXTRACT_BTYPE_IMM
riscv: kprobes: Remove duplication of RVC_EXTRACT_C2_RS1_REG
riscv: kproves: Remove duplication of RVC_EXTRACT_JTYPE_IMM
riscv: kprobes: Remove duplication of RV_EXTRACT_BTYPE_IMM
riscv: kprobes: Remove duplication of RV_EXTRACT_RS1_REG
riscv: kprobes: Remove duplication of RV_EXTRACT_JTYPE_IMM
riscv: kprobes: Move branch_funct3 to insn.h
riscv: kprobes: Move branch_rs2_idx to insn.h
Linux 6.15-rc6
Input: xpad - fix xpad_device sorting
Input: xpad - add support for several more controllers
Input: xpad - fix Share button on Xbox One controllers
...
|
|
The assembly is originally based on the ARM NEON and int.uc, but uses
RISC-V vector instructions to implement the RAID6 syndrome and
recovery calculations.
The functions are tested on QEMU running with the option "-icount shift=0":
raid6: rvvx1 gen() 1008 MB/s
raid6: rvvx2 gen() 1395 MB/s
raid6: rvvx4 gen() 1584 MB/s
raid6: rvvx8 gen() 1694 MB/s
raid6: int64x8 gen() 113 MB/s
raid6: int64x4 gen() 116 MB/s
raid6: int64x2 gen() 272 MB/s
raid6: int64x1 gen() 229 MB/s
raid6: using algorithm rvvx8 gen() 1694 MB/s
raid6: .... xor() 1000 MB/s, rmw enabled
raid6: using rvv recovery algorithm
[Charlie: - Fixup vector options]
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Signed-off-by: Chunyan Zhang <zhangchunyan@iscas.ac.cn>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Tested-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20250305083707.74218-1-zhangchunyan@iscas.ac.cn
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
|
|
The __mod_device_table__* symbols are only parsed by modpost to generate
MODULE_ALIAS() entries from MODULE_DEVICE_TABLE().
Therefore, these symbols do not need to be globally visible, or globally
unique.
If they are in the global scope, we would worry about the symbol
uniqueness, but modpost is fine with parsing multiple symbols with the
same name.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from CAN, wireless, Bluetooth, and Netfilter.
Current release - regressions:
- Revert "kunit: configs: Enable CONFIG_INIT_STACK_ALL_PATTERN in
all_tests", makes kunit error out if compiler is old
- wifi: iwlwifi: mvm: fix assert on suspend
- rxrpc: fix return from none_validate_challenge()
Current release - new code bugs:
- ovpn: couple of fixes for socket cleanup and UDP-tunnel teardown
- can: kvaser_pciefd: refine error prone echo_skb_max handling logic
- fix net_devmem_bind_dmabuf() stub when DEVMEM not compiled
- eth: airoha: fixes for config / accel in bridge mode
Previous releases - regressions:
- Bluetooth: hci_qca: move the SoC type check to the right place, fix
GPIO integration
- prevent a NULL deref in rtnl_create_link() after locking changes
- fix udp gso skb_segment after pull from frag_list
- hv_netvsc: fix potential deadlock in netvsc_vf_setxdp()
Previous releases - always broken:
- netfilter:
- nf_nat: also check reverse tuple to obtain clashing entry
- nf_set_pipapo_avx2: fix initial map fill (zeroing)
- fix the helper for incremental update of packet checksums after
modifying the IP address, used by ILA and BPF
- eth:
- stmmac: prevent div by 0 when clock rate is misconfigured
- ice: fix Tx scheduler handling of XDP and changing queue count
- eth: fix support for the RGMII interface when delays configured"
* tag 'net-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (76 commits)
calipso: unlock rcu before returning -EAFNOSUPPORT
seg6: Fix validation of nexthop addresses
net: prevent a NULL deref in rtnl_create_link()
net: annotate data-races around cleanup_net_task
selftests: drv-net: tso: make bkg() wait for socat to quit
selftests: drv-net: tso: fix the GRE device name
selftests: drv-net: add configs for the TSO test
wireguard: device: enable threaded NAPI
netlink: specs: rt-link: decode ip6gre
netlink: specs: rt-link: add missing byte-order properties
net: wwan: mhi_wwan_mbim: use correct mux_id for multiplexing
wifi: cfg80211/mac80211: correctly parse S1G beacon optional elements
net: dsa: b53: do not touch DLL_IQQD on bcm53115
net: dsa: b53: allow RGMII for bcm63xx RGMII ports
net: dsa: b53: do not configure bcm63xx's IMP port interface
net: dsa: b53: do not enable RGMII delay on bcm63xx
net: dsa: b53: do not enable EEE on bcm63xx
net: ti: icssg-prueth: Fix swapped TX stats for MII interfaces.
selftests: netfilter: nft_nat.sh: add test for reverse clash with nat
netfilter: nf_nat: also check reverse tuple to obtain clashing entry
...
|
|
The following ftrace patch for riscv uses a data store to update ftrace
function. Therefore, a romote fence is required to order it against
function_trace_op updates. The mechanism is similar to the fence between
function_trace_op and update_ftrace_func in the generic ftrace, so we
leverage the same ftrace_sync_ipi function.
[ alex: Fix build warning when !CONFIG_DYNAMIC_FTRACE ]
Signed-off-by: Andy Chiu <andybnac@gmail.com>
Link: https://lore.kernel.org/r/20250407180838.42877-4-andybnac@gmail.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"A fairly small update for the dmaengine subsystem. This has a new ARM
dmaengine driver and couple of new device support and few driver
changes:
New support:
- Renesas RZ/V2H(P) dma support for r9a09g057
- Arm DMA-350 driver
- Tegra Tegra264 ADMA support
Updates:
- AMD ptdma driver code removal and optimizations
- Freescale edma error interrupt handler support"
* tag 'dmaengine-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (27 commits)
dmaengine: idxd: Remove unused pointer and macro
arm64: dts: renesas: r9a09g057: Add DMAC nodes
dmaengine: sh: rz-dmac: Add RZ/V2H(P) support
dmaengine: sh: rz-dmac: Allow for multiple DMACs
irqchip/renesas-rzv2h: Add rzv2h_icu_register_dma_req()
dt-bindings: dma: rz-dmac: Document RZ/V2H(P) family of SoCs
dt-bindings: dma: rz-dmac: Restrict properties for RZ/A1H
dmaengine: idxd: Narrow the restriction on BATCH to ver. 1 only
dmaengine: ti: Add NULL check in udma_probe()
fsldma: Set correct dma_mask based on hw capability
dmaengine: idxd: Check availability of workqueue allocated by idxd wq driver before using
dmaengine: xilinx_dma: Set dma_device directions
dmaengine: tegra210-adma: Add Tegra264 support
dt-bindings: Document Tegra264 ADMA support
dmaengine: dw-edma: Add HDMA NATIVE map check
dmaegnine: fsl-edma: add edma error interrupt handler
dt-bindings: dma: fsl-edma: increase maxItems of interrupts and interrupt-names
dmaengine: ARM_DMA350 should depend on ARM/ARM64
dt-bindings: dma: qcom,bam: Document dma-coherent property
dmaengine: Add Arm DMA-350 driver
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy updates from Vinod Koul:
"As usual featuring couple of new driver and bunch of new device
support and some driver changes to Freescale, rockchip driver along
with couple of yaml binding conversions.
New Support:
- Qualcomm IPQ5424 qusb2 support, IPQ5018 uniphy-pcie driver
- Rockchip usb2 support for RK3562, RK3036 usb2 phy support
- Samsung exynos2200 eusb2 phy support and driver refactoring for
this support, exynos7870 USBDRD support
- Mediatek MT7988 xs-phy support
- Broadcom BCM74110 usb phy support
- Renesas RZ/V2H(P) usb2 phy support
Updates:
- Freescale phy rate claculation updates, i.MX95 tuning support
- Better error handling for amlogic pcie phy
- Rockchip color depth configuration and management support
- Yaml binding conversion for RK3399 Type-C and PCIe Phy"
* tag 'phy-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (77 commits)
phy: tegra: p2u: Broaden architecture dependency
phy: rockchip: inno-usb2: Add usb2 phy support for rk3562
dt-bindings: phy: rockchip,inno-usb2phy: add rk3562
phy: rockchip: inno-usb2: add phy definition for rk3036
dt-bindings: phy: rockchip,inno-usb2phy: add rk3036 compatible
phy: freescale: fsl-samsung-hdmi: Improve LUT search for best clock
phy: freescale: fsl-samsung-hdmi: Refactor finding PHY settings
phy: freescale: fsl-samsung-hdmi: Rename phy_clk_round_rate
phy: renesas: phy-rcar-gen3-usb2: Add USB2.0 PHY support for RZ/V2H(P)
phy: renesas: phy-rcar-gen3-usb2: Sort compatible entries by SoC part number
dt-bindings: phy: renesas,usb2-phy: Document RZ/V2H(P) SoC
dt-bindings: phy: renesas,usb2-phy: Add clock constraint for RZ/G2L family
phy: exynos5-usbdrd: support Exynos USBDRD 3.2 4nm controller
phy: phy-snps-eusb2: add support for exynos2200
phy: phy-snps-eusb2: refactor reference clock init
phy: phy-snps-eusb2: make reset control optional
phy: phy-snps-eusb2: make repeater optional
phy: phy-snps-eusb2: split phy init code
phy: phy-snps-eusb2: refactor constructs names
phy: move phy-qcom-snps-eusb2 out of its vendor sub-directory
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire updates from Vinod Koul:
"A couple of small core changes and an Intel driver change:
- sdw_assign_device_num() logic simplification, using internal slave
id for irqs and optimizing computing of port params in specific
stream states
- Intel driver updates for ACE3+ microphone privacy status reporting
and enabling the status in HDA Intel driver"
* tag 'soundwire-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: only compute port params in specific stream states
ASoC: SOF: Intel: hda: Set the mic_privacy flag for soundwire with ACE3+
soundwire: intel: Add awareness of ACE3+ microphone privacy
soundwire: bus: Add internal slave ID and use for IRQs
soundwire: bus: Simplify sdw_assign_device_num()
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Couple of quick fixes:
- iwlwifi/iwlmld crash on certain error paths
- iwlwifi/iwlmld regulatory data mixup
- iwlwifi/iwlmld suspend/resume fix
- iwlwifi MSI (without -X) fix
- cfg80211/mac80211 S1G parsing fixes
* tag 'wireless-2025-06-05' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: cfg80211/mac80211: correctly parse S1G beacon optional elements
wifi: iwlwifi: mld: Move regulatory domain initialization
wifi: iwlwifi: pcie: fix non-MSIX handshake register
wifi: iwlwifi: mld: avoid panic on init failure
wifi: iwlwifi: mvm: fix assert on suspend
====================
Link: https://patch.msgid.link/20250605095443.17874-6-johannes@sipsolutions.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Better describe the event states.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Leo Yan <leo.yan@arm.com>
Link: https://lkml.kernel.org/r/20250604135801.GK38114@noisy.programming.kicks-ass.net
|
|
S1G beacons are not traditional beacons but a type of extension frame.
Extension frames contain the frame control and duration fields, followed
by zero or more optional fields before the frame body. These optional
fields are distinct from the variable length elements.
The presence of optional fields is indicated in the frame control field.
To correctly locate the elements offset, the frame control must be parsed
to identify which optional fields are present. Currently, mac80211 parses
S1G beacons based on fixed assumptions about the frame layout, without
inspecting the frame control field. This can result in incorrect offsets
to the "variable" portion of the frame.
Properly parse S1G beacon frames by using the field lengths defined in
IEEE 802.11-2024, section 9.3.4.3, ensuring that the elements offset is
calculated accurately.
Fixes: 9eaffe5078ca ("cfg80211: convert S1G beacon to scan results")
Fixes: cd418ba63f0c ("mac80211: convert S1G beacon to scan results")
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20250603053538.468562-1-lachlan.hodges@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Print the actual delay time in pci_bridge_wait_for_secondary_bus()
instead of assuming it was 1000ms (Wilfred Mallawa)
- Revert 'iommu/amd: Prevent binding other PCI drivers to IOMMU PCI
devices', which broke resume from system sleep on AMD platforms and
has been fixed by other commits (Lukas Wunner)
Resource management:
- Remove mtip32xx use of pcim_iounmap_regions(), which is deprecated
and unnecessary (Philipp Stanner)
- Remove pcim_iounmap_regions() and pcim_request_region_exclusive()
and related flags since all uses have been removed (Philipp
Stanner)
- Rework devres 'request' functions so they are no longer 'hybrid',
i.e., their behavior no longer depends on whether
pcim_enable_device or pci_enable_device() was used, and remove
related code (Philipp Stanner)
- Warn (not BUG()) about failure to assign optional resources (Ilpo
Järvinen)
Error handling:
- Log the DPC Error Source ID only when it's actually valid (when
ERR_FATAL or ERR_NONFATAL was received from a downstream device)
and decode into bus/device/function (Bjorn Helgaas)
- Determine AER log level once and save it so all related messages
use the same level (Karolina Stolarek)
- Use KERN_WARNING, not KERN_ERR, when logging PCIe Correctable
Errors (Karolina Stolarek)
- Ratelimit PCIe Correctable and Non-Fatal error logging, with sysfs
controls on interval and burst count, to avoid flooding logs and
RCU stall warnings (Jon Pan-Doh)
Power management:
- Increment PM usage counter when probing reset methods so we don't
try to read config space of a powered-off device (Alex Williamson)
- Set all devices to D0 during enumeration to ensure ACPI opregion is
connected via _REG (Mario Limonciello)
Power control:
- Rename pwrctrl Kconfig symbols from 'PWRCTL' to 'PWRCTRL' to match
the filename paths. Retain old deprecated symbols for
compatibility, except for the pwrctrl slot driver
(PCI_PWRCTRL_SLOT) (Johan Hovold)
- When unregistering pwrctrl, cancel outstanding rescan work before
cleaning up data structures to avoid use-after-free issues (Brian
Norris)
Bandwidth control:
- Simplify link bandwidth controller by replacing the count of Link
Bandwidth Management Status (LBMS) events with a PCI_LINK_LBMS_SEEN
flag (Ilpo Järvinen)
- Update the Link Speed after retraining, since the Link Speed may
have changed (Ilpo Järvinen)
PCIe native device hotplug:
- Ignore Presence Detect Changed caused by DPC.
pciehp already ignores Link Down/Up events caused by DPC, but on
slots using in-band presence detect, DPC causes a spurious Presence
Detect Changed event (Lukas Wunner)
- Ignore Link Down/Up caused by Secondary Bus Reset.
On hotplug ports using in-band presence detect, the reset causes a
Presence Detect Changed event, which mistakenly caused teardown and
re-enumeration of the device. Drivers may need to annotate code
that resets their device (Lukas Wunner)
Virtualization:
- Add an ACS quirk for Loongson Root Ports that don't advertise ACS
but don't allow peer-to-peer transactions between Root Ports; the
quirk allows each Root Port to be in a separate IOMMU group (Huacai
Chen)
Endpoint framework:
- For fixed-size BARs, retain both the actual size and the possibly
larger size allocated to accommodate iATU alignment requirements
(Jerome Brunet)
- Simplify ctrl/SPAD space allocation and avoid allocating more space
than needed (Jerome Brunet)
- Correct MSI-X PBA offset calculations for DesignWare and Cadence
endpoint controllers (Niklas Cassel)
- Align the return value (number of interrupts) encoding for
pci_epc_get_msi()/pci_epc_ops::get_msi() and
pci_epc_get_msix()/pci_epc_ops::get_msix() (Niklas Cassel)
- Align the nr_irqs parameter encoding for
pci_epc_set_msi()/pci_epc_ops::set_msi() and
pci_epc_set_msix()/pci_epc_ops::set_msix() (Niklas Cassel)
Common host controller library:
- Convert pci-host-common to a library so platforms that don't need
native host controller drivers don't need to include these helper
functions (Manivannan Sadhasivam)
Apple PCIe controller driver:
- Extract ECAM bridge creation helper from pci_host_common_probe() to
separate driver-specific things like MSI from PCI things (Marc
Zyngier)
- Dynamically allocate RID-to_SID bitmap to prepare for SoCs with
varying capabilities (Marc Zyngier)
- Skip ports disabled in DT when setting up ports (Janne Grunau)
- Add t6020 compatible string (Alyssa Rosenzweig)
- Add T602x PCIe support (Hector Martin)
- Directly set/clear INTx mask bits because T602x dropped the
accessors that could do this without locking (Marc Zyngier)
- Move port PHY registers to their own reg items to accommodate
T602x, which moves them around; retain default offsets for existing
DTs that lack phy%d entries with the reg offsets (Hector Martin)
- Stop polling for core refclk, which doesn't work on T602x and the
bootloader has already done anyway (Hector Martin)
- Use gpiod_set_value_cansleep() when asserting PERST# in probe
because we're allowed to sleep there (Hector Martin)
Cadence PCIe controller driver:
- Drop a runtime PM 'put' to resolve a runtime atomic count underflow
(Hans Zhang)
- Make the cadence core buildable as a module (Kishon Vijay Abraham I)
- Add cdns_pcie_host_disable() and cdns_pcie_ep_disable() for use by
loadable drivers when they are removed (Siddharth Vadapalli)
Freescale i.MX6 PCIe controller driver:
- Apply link training workaround only on IMX6Q, IMX6SX, IMX6SP
(Richard Zhu)
- Remove redundant dw_pcie_wait_for_link() from
imx_pcie_start_link(); since the DWC core does this, imx6 only
needs it when retraining for a faster link speed (Richard Zhu)
- Toggle i.MX95 core reset to align with PHY powerup (Richard Zhu)
- Set SYS_AUX_PWR_DET to work around i.MX95 ERR051624 erratum: in
some cases, the controller can't exit 'L23 Ready' through Beacon or
PERST# deassertion (Richard Zhu)
- Clear GEN3_ZRXDC_NONCOMPL to work around i.MX95 ERR051586 erratum:
controller can't meet 2.5 GT/s ZRX-DC timing when operating at 8
GT/s, causing timeouts in L1 (Richard Zhu)
- Wait for i.MX95 PLL lock before enabling controller (Richard Zhu)
- Save/restore i.MX95 LUT for suspend/resume (Richard Zhu)
Mobiveil PCIe controller driver:
- Return bool (not int) for link-up check in
mobiveil_pab_ops.link_up() and layerscape-gen4, mobiveil (Hans
Zhang)
NVIDIA Tegra194 PCIe controller driver:
- Create debugfs directory for 'aspm_state_cnt' only when
CONFIG_PCIEASPM is enabled, since there are no other entries (Hans
Zhang)
Qualcomm PCIe controller driver:
- Add OF support for parsing DT 'eq-presets-<N>gts' property for lane
equalization presets (Krishna Chaitanya Chundru)
- Read Maximum Link Width from the Link Capabilities register if DT
lacks 'num-lanes' property (Krishna Chaitanya Chundru)
- Add Physical Layer 64 GT/s Capability ID and register offsets for
8, 32, and 64 GT/s lane equalization registers (Krishna Chaitanya
Chundru)
- Add generic dwc support for configuring lane equalization presets
(Krishna Chaitanya Chundru)
- Add DT and driver support for PCIe on IPQ5018 SoC (Nitheesh Sekar)
Renesas R-Car PCIe controller driver:
- Describe endpoint BAR 4 as being fixed size (Jerome Brunet)
- Document how to obtain R-Car V4H (r8a779g0) controller firmware
(Yoshihiro Shimoda)
Rockchip PCIe controller driver:
- Reorder rockchip_pci_core_rsts because
reset_control_bulk_deassert() deasserts in reverse order, to fix a
link training regression (Jensen Huang)
- Mark RK3399 as being capable of raising INTx interrupts (Niklas
Cassel)
Rockchip DesignWare PCIe controller driver:
- Check only PCIE_LINKUP, not LTSSM status, to determine whether the
link is up (Shawn Lin)
- Increase N_FTS (used in L0s->L0 transitions) and enable ASPM L0s
for Root Complex and Endpoint modes (Shawn Lin)
- Hide the broken ATS Capability in rockchip_pcie_ep_init() instead
of rockchip_pcie_ep_pre_init() so it stays hidden after PERST#
resets non-sticky registers (Shawn Lin)
- Call phy_power_off() before phy_exit() in rockchip_pcie_phy_deinit()
(Diederik de Haas)
Synopsys DesignWare PCIe controller driver:
- Set PORT_LOGIC_LINK_WIDTH to one lane to make initial link training
more robust; this will not affect the intended link width if all
lanes are functional (Wenbin Yao)
- Return bool (not int) for link-up check in dw_pcie_ops.link_up()
and armada8k, dra7xx, dw-rockchip, exynos, histb, keembay,
keystone, kirin, meson, qcom, qcom-ep, rcar_gen4, spear13xx,
tegra194, uniphier, visconti (Hans Zhang)
- Add debugfs support for exposing DWC device-specific PTM context
(Manivannan Sadhasivam)
TI J721E PCIe driver:
- Make j721e buildable as a loadable and removable module (Siddharth
Vadapalli)
- Fix j721e host/endpoint dependencies that result in link failures
in some configs (Arnd Bergmann)
Device tree bindings:
- Add qcom DT binding for 'global' interrupt (PCIe controller and
link-specific events) for ipq8074, ipq8074-gen3, ipq6018, sa8775p,
sc7280, sc8180x sdm845, sm8150, sm8250, sm8350 (Manivannan
Sadhasivam)
- Add qcom DT binding for 8 MSI SPI interrupts for msm8998, ipq8074,
ipq8074-gen3, ipq6018 (Manivannan Sadhasivam)
- Add dw rockchip DT binding for rk3576 and rk3562 (Kever Yang)
- Correct indentation and style of examples in brcm,stb-pcie,
cdns,cdns-pcie-ep, intel,keembay-pcie-ep, intel,keembay-pcie,
microchip,pcie-host, rcar-pci-ep, rcar-pci-host, xilinx-versal-cpm
(Krzysztof Kozlowski)
- Convert Marvell EBU (dove, kirkwood, armada-370, armada-xp) and
armada8k from text to schema DT bindings (Rob Herring)
- Remove obsolete .txt DT bindings for content that has been moved to
schemas (Rob Herring)
- Add qcom DT binding for MHI registers in IPQ5332, IPQ6018, IPQ8074
and IPQ9574 (Varadarajan Narayanan)
- Convert v3,v360epc-pci from text to DT schema binding (Rob Herring)
- Change microchip,pcie-host DT binding to be 'dma-noncoherent' since
PolarFire may be configured that way (Conor Dooley)
Miscellaneous:
- Drop 'pci' suffix from intel_mid_pci.c filename to match similar
files (Andy Shevchenko)
- All platforms with PCI have an MMU, so add PCI Kconfig dependency
on MMU to simplify build testing and avoid inadvertent build
regressions (Arnd Bergmann)
- Update Krzysztof Wilczyński's email address in MAINTAINERS
(Krzysztof Wilczyński)
- Update Manivannan Sadhasivam's email address in MAINTAINERS
(Manivannan Sadhasivam)"
* tag 'pci-v6.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (147 commits)
MAINTAINERS: Update Manivannan Sadhasivam email address
PCI: j721e: Fix host/endpoint dependencies
PCI: j721e: Add support to build as a loadable module
PCI: cadence-ep: Introduce cdns_pcie_ep_disable() helper for cleanup
PCI: cadence-host: Introduce cdns_pcie_host_disable() helper for cleanup
PCI: cadence: Add support to build pcie-cadence library as a kernel module
MAINTAINERS: Update Krzysztof Wilczyński email address
PCI: Remove unnecessary linesplit in __pci_setup_bridge()
PCI: WARN (not BUG()) when we fail to assign optional resources
PCI: Remove unused pci_printk()
PCI: qcom: Replace PERST# sleep time with proper macro
PCI: dw-rockchip: Replace PERST# sleep time with proper macro
PCI: host-common: Convert to library for host controller drivers
PCI/ERR: Remove misleading TODO regarding kernel panic
PCI: cadence: Remove duplicate message code definitions
PCI: endpoint: Align pci_epc_set_msix(), pci_epc_ops::set_msix() nr_irqs encoding
PCI: endpoint: Align pci_epc_set_msi(), pci_epc_ops::set_msi() nr_irqs encoding
PCI: endpoint: Align pci_epc_get_msix(), pci_epc_ops::get_msix() return value encoding
PCI: endpoint: Align pci_epc_get_msi(), pci_epc_ops::get_msi() return value encoding
PCI: cadence-ep: Correct PBA offset in .set_msix() callback
...
|
|
- Drop 'pci' suffix from intel_mid_pci.c filename to match similar files
(Andy Shevchenko)
- All platforms with PCI have an MMU, so add PCI Kconfig dependency on MMU
to simplify build testing and avoid inadvertent build regressions (Arnd
Bergmann)
- Update driver path in PCI NVMe function documentation (Rick Wertenbroek)
- Remove unused pci_printk() (Ilpo Järvinen)
- Warn (not BUG()) about failure to assign optional resources (Ilpo
Järvinen)
- Update Krzysztof Wilczyński's email address in MAINTAINERS (Krzysztof
Wilczyński)
- Update Manivannan Sadhasivam's email address in MAINTAINERS (Manivannan
Sadhasivam)
* pci/misc:
MAINTAINERS: Update Manivannan Sadhasivam email address
MAINTAINERS: Update Krzysztof Wilczyński email address
PCI: Remove unnecessary linesplit in __pci_setup_bridge()
PCI: WARN (not BUG()) when we fail to assign optional resources
PCI: Remove unused pci_printk()
Documentation: Fix path for NVMe PCI endpoint target driver
PCI: Add CONFIG_MMU dependency
x86/PCI: Drop 'pci' suffix from intel_mid_pci.c
|
|
- Add debugfs support for exposing DWC device-specific PTM context
(Manivannan Sadhasivam)
* pci/ptm-debugfs:
PCI: qcom-ep: Mask PTM_UPDATING interrupt
PCI: dwc: Add debugfs support for PTM context
PCI: dwc: Pass DWC PCIe mode to dwc_pcie_debugfs_init()
PCI: Add debugfs support for exposing PTM context
|
|
- Check only PCIE_LINKUP, not LTSSM status, to determine whether the link
is up (Shawn Lin)
- Increase N_FTS (used in L0s->L0 transitions) and enable ASPM L0s for Root
Complex and Endpoint modes (Shawn Lin)
- Hide the broken ATS Capability in rockchip_pcie_ep_init() instead of
rockchip_pcie_ep_pre_init() so it stays hidden after PERST# resets
non-sticky registers (Shawn Lin)
- Remove unused PCIE_CLIENT_GENERAL_DEBUG definition (Hans Zhang)
- Organize register and bitfield definitions logically (Hans Zhang)
- Use rockchip_pcie_link_up() to check link up instead of open coding, and
use GENMASK() and FIELD_GET() when possible (Hans Zhang)
- Call phy_power_off() before phy_exit() in rockchip_pcie_phy_deinit()
(Diederik de Haas)
- Return bool (not int) for link-up check in dw_pcie_ops.link_up() and
armada8k, dra7xx, dw-rockchip, exynos, histb, keembay, keystone, kirin,
meson, qcom, qcom-ep, rcar_gen4, spear13xx, tegra194, uniphier, visconti
(Hans Zhang)
- Return bool (not int) for link-up check in mobiveil_pab_ops.link_up() and
layerscape-gen4, mobiveil (Hans Zhang)
- Simplify j721e link-up check (Hans Zhang)
- Convert pci-host-common to a library so platforms that don't need native
host controller drivers don't need to include these helper functions
(Manivannan Sadhasivam)
* pci/controller/dw-rockchip:
PCI: qcom: Replace PERST# sleep time with proper macro
PCI: dw-rockchip: Replace PERST# sleep time with proper macro
PCI: host-common: Convert to library for host controller drivers
PCI: cadence: Simplify J721e link status check
PCI: mobiveil: Return bool from link up check
PCI: dwc: Return bool from link up check
PCI: dw-rockchip: Fix PHY function call sequence in rockchip_pcie_phy_deinit()
PCI: dw-rockchip: Use rockchip_pcie_link_up() to check link up instead of open coding
PCI: dw-rockchip: Reorganize register and bitfield definitions
PCI: dw-rockchip: Remove unused PCIE_CLIENT_GENERAL_DEBUG definition
PCI: dw-rockchip: Move rockchip_pcie_ep_hide_broken_ats_cap_rk3588() to dw_pcie_ep_ops::init()
PCI: dw-rockchip: Enable ASPM L0s capability for both RC and EP modes
PCI: dw-rockchip: Remove PCIE_L0S_ENTRY check from rockchip_pcie_link_up()
# Conflicts:
# drivers/pci/controller/pcie-apple.c
# include/linux/pci-ecam.h
|
|
- Skip ports disabled in DT when setting up ports (Janne Grunau)
- Add t6020 compatible string (Alyssa Rosenzweig)
- Extract ECAM bridge creation helper from pci_host_common_probe() to
separate driver-specific things like MSI from PCI things (Marc Zyngier)
- Dynamically allocate RID-to_SID bitmap to prepare for SoCs with varying
capabilities (Marc Zyngier)
- Directly set/clear INTx mask bits because T602x dropped the accessors
that could do this without locking (Marc Zyngier)
- Move port PHY registers to their own reg items to accommodate T602x,
which moves them around; retain default offsets for existing DTs that
lack phy%d entries with the reg offsets (Hector Martin)
- Stop polling for core refclk, which doesn't work on T602x and the
bootloader has already done anyway (Hector Martin)
- Use gpiod_set_value_cansleep() when asserting PERST# in probe because
we're allowed to sleep there (Hector Martin)
- Move register offsets into SoC-specific structure (Hector Martin)
- Add T602x PCIe support (Hector Martin)
* pci/controller/apple:
PCI: apple: Add T602x PCIe support
PCI: apple: Abstract register offsets via a SoC-specific structure
PCI: apple: Use gpiod_set_value_cansleep in probe flow
PCI: apple: Drop poll for CORE_RC_PHYIF_STAT_REFCLK
PCI: apple: Move port PHY registers to their own reg items
PCI: apple: Fix missing OF node reference in apple_pcie_setup_port
PCI: apple: Move away from INTMSK{SET,CLR} for INTx and private interrupts
PCI: apple: Dynamically allocate RID-to_SID bitmap
PCI: apple: Move over to standalone probing
PCI: ecam: Allow cfg->priv to be pre-populated from the root port device
PCI: host-generic: Extract an ECAM bridge creation helper from pci_host_common_probe()
dt-bindings: pci: apple,pcie: Add t6020 compatible string
PCI: apple: Set only available ports up
|
|
- For fixed-size BARs, retain both the actual size and the possibly larger
size allocated to accommodate iATU alignment requirements (Jerome Brunet)
- Simplify ctrl/SPAD space allocation and avoid allocating more space than
needed (Jerome Brunet)
- Correct MSI-X PBA offset calculations for DesignWare and Cadence endpoint
controllers (Niklas Cassel)
- Align the return value (number of interrupts) encoding for
pci_epc_get_msi()/pci_epc_ops::get_msi() and
pci_epc_get_msix()/pci_epc_ops::get_msix() (Niklas Cassel)
- Align the nr_irqs parameter encoding for
pci_epc_set_msi()/pci_epc_ops::set_msi() and
pci_epc_set_msix()/pci_epc_ops::set_msix() (Niklas Cassel)
* pci/endpoint:
PCI: endpoint: Align pci_epc_set_msix(), pci_epc_ops::set_msix() nr_irqs encoding
PCI: endpoint: Align pci_epc_set_msi(), pci_epc_ops::set_msi() nr_irqs encoding
PCI: endpoint: Align pci_epc_get_msix(), pci_epc_ops::get_msix() return value encoding
PCI: endpoint: Align pci_epc_get_msi(), pci_epc_ops::get_msi() return value encoding
PCI: cadence-ep: Correct PBA offset in .set_msix() callback
PCI: dwc: ep: Correct PBA offset in .set_msix() callback
PCI: endpoint: pci-epf-vntb: Simplify ctrl/SPAD space allocation
PCI: endpoint: Retain fixed-size BAR size as well as aligned size
|
|
- Add pm_runtime_put() cleanup helper for use with __free() to
automatically drop the device usage count when a pointer goes out of
scope (Alex Williamson)
- Increment PM usage counter when probing reset methods so we don't try to
read config space of a powered-off device (Alex Williamson)
- Set all devices to D0 during enumeration to ensure ACPI opregion is
connected via _REG (Mario Limonciello)
* pci/pm:
PCI: Explicitly put devices into D0 when initializing
PCI: Increment PM usage counter when probing reset methods
PM: runtime: Define pm_runtime_put cleanup helper
|
