| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Merge series from André Draszik <andre.draszik@linaro.org>:
This series extends the existing S2MPG10 PMIC driver to add support for
the regulators, and adds new S2MPG11 core and regulator drivers.
The patches are kept together in one series, due to S2MPG11 and its
regulators being very similar to S2MPG10.
The Samsung S2MPG11 PMIC is a Power Management IC for mobile
applications with buck converters, various LDOs, power meters, and
additional GPIO interfaces. It typically complements an S2MPG10 PMIC in
a main/sub configuration as the sub-PMIC and both are used on the
Google Pixel 6 and 6 Pro (oriole / raven).
A DT update for Oriole / Raven to enable these is required which I will
send out separately.
|
|
The S2MPG10 PMIC is a Power Management IC for mobile applications with
buck converters, various LDOs, power meters, RTC, clock outputs, and
additional GPIO interfaces.
It has 10 buck and 31 LDO rails. Several of these can either be
controlled via software (register writes) or via external signals, in
particular by:
* one out of several input pins connected to a main processor's:
* GPIO pins
* other pins that are e.g. firmware- or power-domain-controlled
without explicit driver intervention
* a combination of input pins and register writes.
Control via input pins allows PMIC rails to be controlled by firmware,
e.g. during standby/suspend, or as part of power domain handling where
otherwise that would not be possible. Additionally toggling a pin is
faster than register writes, and it also allows the PMIC to ensure that
any necessary timing requirements between rails are respected
automatically if multiple rails are to be enabled or disabled quasi
simultaneously.
This commit implements support for all these rails and control
combinations.
Additional data needs to be stored for each regulator, e.g. the input
pin for external control, or a rail-specific ramp-rate for when
enabling a buck-rail. Therefore, probe() is updated slightly to make
that possible.
Note1: For an externally controlled rail, the regulator_ops provide an
empty ::enable() and no ::disable() implementations, even though Linux
can not enable the rail and one might think ::enable could be NULL.
Without ops->enable(), the regulator core will assume enabling such a
rail failed, though, and in turn never add a reference to its parent
(supplier) rail. Once a different (Linux-controlled) sibling (consumer)
rail on that same parent rail gets disabled, the parent gets disabled
(cutting power to the externally controlled rail although it should
stay on), and the system will misbehave.
Note2: While external control via input pins appears to exist on other
versions of this PMIC, there is more flexibility in this version, in
particular there is a selection of input pins to choose from for each
rail (which must therefore be configured accordingly if in use),
whereas other versions don't have this flexibility.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://patch.msgid.link/20260122-s2mpg1x-regulators-v7-16-3b1f9831fffd@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
REGULATOR_LINEAR_VRANGE is similar to REGULATOR_LINEAR_RANGE, but
allows a more natural declaration of a voltage range for a regulator,
in that it expects the minimum and maximum values as voltages rather
than as selectors.
Using voltages arguably makes this macro easier to use by drivers and
code using it can become easier to read compared to
REGULATOR_LINEAR_RANGE.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://patch.msgid.link/20260122-s2mpg1x-regulators-v7-10-3b1f9831fffd@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add support for Samsung's S2MPG11 PMIC, which is a Power Management IC
for mobile applications with buck converters, various LDOs, power
meters, NTC thermistor inputs, and additional GPIO interfaces. It
typically complements an S2MPG10 PMIC in a main/sub configuration as
the sub-PMIC.
Like S2MPG10, communication is not via I2C, but via the Samsung ACPM
firmware.
While at it, we can also switch to asynchronous probe, which helps with
probe performance, as the drivers for s2mpg10 and s2mpg11 can probe in
parallel.
Note: The firmware uses the ACPM channel ID and the Speedy channel ID
to select the PMIC address. Since these are firmware properties, they
can not be retrieved from DT, but instead are deducted from the
compatible for now.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://patch.msgid.link/20260122-s2mpg1x-regulators-v7-9-3b1f9831fffd@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Bucks can reasonably be supplies for LDOs, but not the other way
around. Since rail registration is going to be ordered by 'enum
s2mpg10_regulators', it makes sense to specify bucks first, so that
during LDO registration it is more likely that the corresponding supply
is known already.
This can improve probe speed, as no unnecessary deferrals and retries
are required anymore.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://patch.msgid.link/20260122-s2mpg1x-regulators-v7-8-3b1f9831fffd@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
This was used only to allow the s5m RTC driver to deal with the alarm
IRQ. That driver now uses a different approach to acquire that IRQ, and
::irq_data doesn't need to be kept around anymore.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://patch.msgid.link/20260113-s5m-alarm-v3-3-855a19db1277@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Merge series from Andreas Kemnade <andreas@kemnade.info>:
Add a driver for the TPS65185 regulator which provides the
comparatively high voltages needed for electronic paper displays.
Datasheet for the TPS65185 is at https://www.ti.com/lit/gpn/tps65185
To simplify things, include the hwmon part directly which is only
one temperature sensor and there are no other functions besides regulators
in this chip.
|
|
In a vain attempt to consolidate the email zoo switch everything to the
kernel.org account.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Remove incorrect __user annotation from struct xattr_args::value
- Documentation fix: Add missing kernel-doc description for the @isnew
parameter in ilookup5_nowait() to silence Sphinx warnings
- Documentation fix: Fix kernel-doc comment for __start_dirop() - the
function name in the comment was wrong and the @state parameter was
undocumented
- Replace dynamic folio_batch allocation with stack allocation in
iomap_zero_range(). The dynamic allocation was problematic for
ext4-on-iomap work (didn't handle allocation failure properly) and
triggered lockdep complaints. Uses a flag instead to control batch
usage
- Re-add #ifdef guards around PIDFD_GET_<ns-type>_NAMESPACE ioctls.
When a namespace type is disabled, ns->ops is NULL, causes crashes
during inode eviction when closing the fd. The ifdefs were removed in
a recent simplification but are still needed
- Fixe a race where a folio could be unlocked before the trailing zeros
(for EOF within the page) were written
- Split out a dedicated lease_dispose_list() helper since lease code
paths always know they're disposing of leases. Removes unnecessary
runtime flag checks and prepares for upcoming lease_manager
enhancements
- Fix userland delegation requests succeeding despite conflicting
opens. Previously, FL_LAYOUT and FL_DELEG leases bypassed conflict
checks (a hack for nfsd). Adds new ->lm_open_conflict() lease_manager
operation so userland delegations get proper conflict checking while
nfsd can continue its own conflict handling
- Fix LOOKUP_CACHED path lookups incorrectly falling through to the
slow path. After legitimize_links() calls were conditionally elided,
the routine would always fail with LOOKUP_CACHED regardless of
whether there were any links. Now the flag is checked at the two
callsites before calling legitimize_links()
- Fix bug in media fd allocation in media_request_alloc()
- Fix mismatched API calls in ecryptfs_mknod(): was calling
end_removing() instead of end_creating() after
ecryptfs_start_creating_dentry()
- Fix dentry reference count leak in ecryptfs_mkdir(): a dget() of the
lower parent dir was added but never dput()'d, causing BUG during
lower filesystem unmount due to the still-in-use dentry
* tag 'vfs-6.19-rc5.fixes' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs:
pidfs: protect PIDFD_GET_* ioctls() via ifdef
ecryptfs: Release lower parent dentry after creating dir
ecryptfs: Fix improper mknod pairing of start_creating()/end_removing()
get rid of bogus __user in struct xattr_args::value
VFS: fix __start_dirop() kernel-doc warnings
fs: Describe @isnew parameter in ilookup5_nowait()
fs: make sure to fail try_to_unlazy() and try_to_unlazy() for LOOKUP_CACHED
netfs: Fix early read unlock of page with EOF in middle
filelock: allow lease_managers to dictate what qualifies as a conflict
filelock: add lease_dispose_list() helper
iomap: replace folio_batch allocation with stack allocation
media: mc: fix potential use-after-free in media_request_alloc()
|
|
Since commit 98e48cd9283d ("regulator: core: resolve supply for
boot-on/always-on regulators"), the regulator core returns
-EPROBE_DEFER if a supply can not be resolved at regulator_register()
time due to set_machine_constraints() requiring that supply (e.g.
because of always-on or boot-on).
In some hardware designs, multiple PMICs are used where individual
rails of each act as supplies for rails of the other, and vice-versa.
In such a design no PMIC driver can probe when registering one top-
level regulator device (as is common practice for almost all regulator
drivers in Linux) since that commit. Supplies are only considered when
their driver has fully bound, but because in a design like the above
two drivers / devices depend on each other, neither will have fully
bound while the other probes. The Google Pixel 6 and 6 Pro (oriole and
raven) are examples of such a design.
One way to make this work would be to register each rail as an
individual device, rather than just one top-level regulator device.
Then, fw-devlink and Linux' driver core could do their usual handling
of deferred device probe as each rail would be probed individually.
This approach was dismissed in [1] as each regulator driver would have
to take care of this itself.
Alternatively, we can change the regulator core to not fail
regulator_register() if a rail's required supply can not be resolved
while keeping the intended change from above mentioned commit, and
instead retry whenever a new rail is registered. This commit implements
such an approach:
If set_machine_constraints() requests probe deferral,
regulator_register() still succeeds and we retry setting
constraints as part of regulator_resolve_supply().
We still do not enable the regulator or allow consumers to use it
until constraints have been set (including resolution of the
supply) to prevent enabling of a regulator before its supply.
With this change, we keep track of regulators with missing required
supplies and can therefore try to resolve them again and try to set
the constraints again once more regulators become available.
Care has to be taken to not allow consumers to use regulators that
haven't had their constraints set yet. regulator_get() ensures that
and now returns -EPROBE_DEFER in that case.
The implementation is straight-forward, thanks to our newly introduced
regulator-bus. Locking in regulator_resolve_supply() has to be done
carefully, as a combination of regulator_(un)lock_two() and
regulator_(un)lock_dependent() is needed. The reason is that
set_machine_constraints() might call regulator_enable() which needs
rdev and all its dependents locked, but everything else requires to
only have rdev and its supply locked.
Link: https://lore.kernel.org/all/aRn_-o-vie_QoDXD@sirena.co.uk/ [1]
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://patch.msgid.link/20260109-regulators-defer-v2-8-1a25dc968e60@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When a regulator A and its supply B are provided by different devices,
the driver implementing B might be last to probe (with A still
pending resolution of its supply B). While we try to resolve all
pending supplies for all regulators (including A) during
regulator_register() of B via regulator_register_resolve_supply(),
supply resolution will still not work for A as the driver for B hasn't
finished binding to the PMIC device corresponding to B at that stage
yet. The regulator core explicitly only allows supplies from other
devices to be used once the relevant driver has fully bound, mainly to
avoid having to deal with cases where B itself might -EPROBE_DEFER.
In this case, A's supply will only be resolved as part of the core's
regulator_init_complete_work_function(), which currently is scheduled
to run after 30s. This was added as a work-around in
commit 3827b64dba27 ("regulator: core: Resolve supplies before
disabling unused regulators") to cover this situation.
There are two problems with that approach:
* it potentially runs long after all our consumers have probed
* an upcoming change will allow regulator_register() to complete
successfully even when required supplies (e.g. due to always-on or
boot-on) are missing at register time, deferring full configuration
of the regulator (and usability by consumers, i.e. usually consumer
probe) until the supply becomes available.
Resolving supplies in the late work func can therefore make it
impossible for consumers to probe at all, as the driver core will not
know to reprobe consumers when supplies have resolved.
We could schedule an earlier work to try to resolve supplies sooner,
but that'd be racy as consumers of A might try to probe before A's
supply gets fully resolved via this extra work.
Instead, add a very simple regulator bus and add a dummy device with a
corresponding driver to it for each regulator that is missing its
supply during regulator_register(). This way, the driver core will call
our bus' probe whenever a new (regulator) device was successfully
bound, allowing us to retry resolving the supply during (our bus) probe
and to bind this dummy device if successful. In turn this means the
driver core will see a newly bound device and retry probing of all
pending consumers, if any.
With that in place, we can avoid walking the full list of all known
regulators to try resolve missing supplies during regulator_register(),
as the driver core will invoke the bus probe for regulators that are
still pending their supplies. We can also drop the code trying to
resolve supplies one last time before unused regulators get disabled,
as all supplies should have resolved at that point in time, and if they
haven't then there's no point in trying again, as the outcome won't
change.
Note: We can not reuse the existing struct device created for each
rail, as a device can not be part of a class and a bus simultaneously.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://patch.msgid.link/20260109-regulators-defer-v2-7-1a25dc968e60@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Remove useless assignment of soft_mode variable
The function __ftrace_event_enable_disable() sets "soft_mode" in one
of the branch paths but doesn't use it after that. Remove the setting
of that variable.
- Add a cond_resched() in ring_buffer_resize()
The resize function that allocates all the pages for the ring buffer
was causing a soft lockup on PREEMPT_NONE configs when allocating
large buffers on machines with many CPUs. Hopefully this is the last
cond_resched() needed to be added as PREEMPT_LAZY becomes the norm in
the future.
- Make ftrace_graph_ent depth field signed
The "depth" field of struct ftrace_graph_ent was converted from "int"
to "unsigned long" for alignment reasons to work with being embedded
in other structures. The conversion from a signed to unsigned caused
integrity checks to always pass as they were comparing "depth" to
less than zero. Make the field signed long.
- Add recursion protection to stack trace events
A infinite recursion was triggered by a stack trace event calling RCU
which internally called rcu_read_unlock_special(), which triggered an
event that was also doing stacktraces which cause it to trigger the
same RCU lock that called rcu_read_unlock_special() again.
Update the trace_test_and_set_recursion() to add a set of context
checks for events to use, and have the stack trace event use that for
recursion protection.
- Make the variable ftrace_dump_on_oops static
The cleanup of sysctl that moved all the updates to the files that
use them moved the reference of ftrace_dump_on_oops to where it is
used. It is no longer used outside of the trace.c file. Make it
static.
* tag 'trace-v6.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
trace: ftrace_dump_on_oops[] is not exported, make it static
tracing: Add recursion protection in kernel stack trace recording
ftrace: Make ftrace_graph_ent depth field signed
ring-buffer: Avoid softlockup in ring_buffer_resize() during memory free
tracing: Drop unneeded assignment to soft_mode
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter and wireless.
Current release - fix to a fix:
- net: do not write to msg_get_inq in callee
- arp: do not assume dev_hard_header() does not change skb->head
Current release - regressions:
- wifi: mac80211: don't iterate not running interfaces
- eth: mlx5: fix NULL pointer dereference in ioctl module EEPROM
Current release - new code bugs:
- eth: bnge: add AUXILIARY_BUS to Kconfig dependencies
Previous releases - regressions:
- eth: mlx5: dealloc forgotten PSP RX modify header
Previous releases - always broken:
- ping: fix ICMP out SNMP stats double-counting with ICMP sockets
- bonding: preserve NETIF_F_ALL_FOR_ALL across TSO updates
- bridge: fix C-VLAN preservation in 802.1ad vlan_tunnel egress
- eth: bnxt: fix potential data corruption with HW GRO/LRO"
* tag 'net-6.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (70 commits)
arp: do not assume dev_hard_header() does not change skb->head
net: enetc: fix build warning when PAGE_SIZE is greater than 128K
atm: Fix dma_free_coherent() size
tools: ynl: don't install tests
net: do not write to msg_get_inq in callee
bnxt_en: Fix NULL pointer crash in bnxt_ptp_enable during error cleanup
net: usb: pegasus: fix memory leak in update_eth_regs_async()
net: 3com: 3c59x: fix possible null dereference in vortex_probe1()
net/sched: sch_qfq: Fix NULL deref when deactivating inactive aggregate in qfq_reset
wifi: mac80211: collect station statistics earlier when disconnect
wifi: mac80211: restore non-chanctx injection behaviour
wifi: mac80211_hwsim: disable BHs for hwsim_radio_lock
wifi: mac80211: don't iterate not running interfaces
wifi: mac80211_hwsim: fix typo in frequency notification
wifi: avoid kernel-infoleak from struct iw_point
net: airoha: Fix schedule while atomic in airoha_ppe_deinit()
selftests: netdevsim: add carrier state consistency test
net: netdevsim: fix inconsistent carrier state after link/unlink
selftests: drv-net: Bring back tool() to driver __init__s
net/sched: act_api: avoid dereferencing ERR_PTR in tcf_idrinfo_destroy
...
|
|
A bug was reported about an infinite recursion caused by tracing the rcu
events with the kernel stack trace trigger enabled. The stack trace code
called back into RCU which then called the stack trace again.
Expand the ftrace recursion protection to add a set of bits to protect
events from recursion. Each bit represents the context that the event is
in (normal, softirq, interrupt and NMI).
Have the stack trace code use the interrupt context to protect against
recursion.
Note, the bug showed an issue in both the RCU code as well as the tracing
stacktrace code. This only handles the tracing stack trace side of the
bug. The RCU fix will be handled separately.
Link: https://lore.kernel.org/all/20260102122807.7025fc87@gandalf.local.home/
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Link: https://patch.msgid.link/20260105203141.515cd49f@gandalf.local.home
Reported-by: Yao Kai <yaokai34@huawei.com>
Tested-by: Yao Kai <yaokai34@huawei.com>
Fixes: 5f5fa7ea89dc ("rcu: Don't use negative nesting depth in __rcu_read_unlock()")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The code has integrity checks to make sure that depth never goes below
zero. But the depth field has recently been converted to unsigned long
from "int" (for alignment reasons). As unsigned long can never be less
than zero, the integrity checks no longer work.
Convert depth to long from unsigned long to allow the integrity checks to
work again.
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: pengdonglin <pengdonglin@xiaomi.com>
Link: https://patch.msgid.link/20260102143148.251c2e16@gandalf.local.home
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/aS6kGi0maWBl-MjZ@stanley.mountain/
Fixes: f83ac7544fbf7 ("function_graph: Enable funcgraph-args and funcgraph-retaddr to work simultaneously")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
Fix typos in npu rx DMA descriptor definitions.
Fixes: b3ef7bdec66fb ("net: airoha: Add airoha_offload.h header")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260102-airoha-npu-dma-rx-def-fixes-v1-1-205fc6bf7d94@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Directly increment the TSO features incurs a side effect: it will also
directly clear the flags in NETIF_F_ALL_FOR_ALL on the master device,
which can cause issues such as the inability to enable the nocache copy
feature on the bonding driver.
The fix is to include NETIF_F_ALL_FOR_ALL in the update mask, thereby
preventing it from being cleared.
Fixes: b0ce3508b25e ("bonding: allow TSO being set on bonding master")
Signed-off-by: Di Zhu <zhud@hygon.cn>
Link: https://patch.msgid.link/20251224012224.56185-1-zhud@hygon.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core entry fix from Borislav Petkov:
- Make sure clang inlines trivial local_irq_* helpers
* tag 'core_urgent_for_v6.19_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
entry: Always inline local_irq_{enable,disable}_exit_to_user()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring fixes from Jens Axboe:
- Removed dead argument length for io_uring_validate_mmap_request()
- Use GFP_NOWAIT for overflow CQEs on legacy ring setups rather than
GFP_ATOMIC, which makes it play nicer with memcg limits
- Fix a potential circular locking issue with tctx node removal and
exec based cancelations
* tag 'io_uring-6.19-20260102' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring/memmap: drop unused sz param in io_uring_validate_mmap_request()
io_uring/tctx: add separate lock for list of tctx's in ctx
io_uring: use GFP_NOWAIT for overflow CQEs on legacy rings
|
|
ctx->tcxt_list holds the tasks using this ring, and it's currently
protected by the normal ctx->uring_lock. However, this can cause a
circular locking issue, as reported by syzbot, where cancelations off
exec end up needing to remove an entry from this list:
======================================================
WARNING: possible circular locking dependency detected
syzkaller #0 Tainted: G L
------------------------------------------------------
syz.0.9999/12287 is trying to acquire lock:
ffff88805851c0a8 (&ctx->uring_lock){+.+.}-{4:4}, at: io_uring_del_tctx_node+0xf0/0x2c0 io_uring/tctx.c:179
but task is already holding lock:
ffff88802db5a2e0 (&sig->cred_guard_mutex){+.+.}-{4:4}, at: prepare_bprm_creds fs/exec.c:1360 [inline]
ffff88802db5a2e0 (&sig->cred_guard_mutex){+.+.}-{4:4}, at: bprm_execve+0xb9/0x1400 fs/exec.c:1733
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (&sig->cred_guard_mutex){+.+.}-{4:4}:
__mutex_lock_common kernel/locking/mutex.c:614 [inline]
__mutex_lock+0x187/0x1350 kernel/locking/mutex.c:776
proc_pid_attr_write+0x547/0x630 fs/proc/base.c:2837
vfs_write+0x27e/0xb30 fs/read_write.c:684
ksys_write+0x145/0x250 fs/read_write.c:738
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xec/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
-> #1 (sb_writers#3){.+.+}-{0:0}:
percpu_down_read_internal include/linux/percpu-rwsem.h:53 [inline]
percpu_down_read_freezable include/linux/percpu-rwsem.h:83 [inline]
__sb_start_write include/linux/fs/super.h:19 [inline]
sb_start_write+0x4d/0x1c0 include/linux/fs/super.h:125
mnt_want_write+0x41/0x90 fs/namespace.c:499
open_last_lookups fs/namei.c:4529 [inline]
path_openat+0xadd/0x3dd0 fs/namei.c:4784
do_filp_open+0x1fa/0x410 fs/namei.c:4814
io_openat2+0x3e0/0x5c0 io_uring/openclose.c:143
__io_issue_sqe+0x181/0x4b0 io_uring/io_uring.c:1792
io_issue_sqe+0x165/0x1060 io_uring/io_uring.c:1815
io_queue_sqe io_uring/io_uring.c:2042 [inline]
io_submit_sqe io_uring/io_uring.c:2320 [inline]
io_submit_sqes+0xbf4/0x2140 io_uring/io_uring.c:2434
__do_sys_io_uring_enter io_uring/io_uring.c:3280 [inline]
__se_sys_io_uring_enter+0x2e0/0x2b60 io_uring/io_uring.c:3219
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xec/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
-> #0 (&ctx->uring_lock){+.+.}-{4:4}:
check_prev_add kernel/locking/lockdep.c:3165 [inline]
check_prevs_add kernel/locking/lockdep.c:3284 [inline]
validate_chain kernel/locking/lockdep.c:3908 [inline]
__lock_acquire+0x15a6/0x2cf0 kernel/locking/lockdep.c:5237
lock_acquire+0x107/0x340 kernel/locking/lockdep.c:5868
__mutex_lock_common kernel/locking/mutex.c:614 [inline]
__mutex_lock+0x187/0x1350 kernel/locking/mutex.c:776
io_uring_del_tctx_node+0xf0/0x2c0 io_uring/tctx.c:179
io_uring_clean_tctx+0xd4/0x1a0 io_uring/tctx.c:195
io_uring_cancel_generic+0x6ca/0x7d0 io_uring/cancel.c:646
io_uring_task_cancel include/linux/io_uring.h:24 [inline]
begin_new_exec+0x10ed/0x2440 fs/exec.c:1131
load_elf_binary+0x9f8/0x2d70 fs/binfmt_elf.c:1010
search_binary_handler fs/exec.c:1669 [inline]
exec_binprm fs/exec.c:1701 [inline]
bprm_execve+0x92e/0x1400 fs/exec.c:1753
do_execveat_common+0x510/0x6a0 fs/exec.c:1859
do_execve fs/exec.c:1933 [inline]
__do_sys_execve fs/exec.c:2009 [inline]
__se_sys_execve fs/exec.c:2004 [inline]
__x64_sys_execve+0x94/0xb0 fs/exec.c:2004
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xec/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
other info that might help us debug this:
Chain exists of:
&ctx->uring_lock --> sb_writers#3 --> &sig->cred_guard_mutex
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&sig->cred_guard_mutex);
lock(sb_writers#3);
lock(&sig->cred_guard_mutex);
lock(&ctx->uring_lock);
*** DEADLOCK ***
1 lock held by syz.0.9999/12287:
#0: ffff88802db5a2e0 (&sig->cred_guard_mutex){+.+.}-{4:4}, at: prepare_bprm_creds fs/exec.c:1360 [inline]
#0: ffff88802db5a2e0 (&sig->cred_guard_mutex){+.+.}-{4:4}, at: bprm_execve+0xb9/0x1400 fs/exec.c:1733
stack backtrace:
CPU: 0 UID: 0 PID: 12287 Comm: syz.0.9999 Tainted: G L syzkaller #0 PREEMPT(full)
Tainted: [L]=SOFTLOCKUP
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025
Call Trace:
<TASK>
dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120
print_circular_bug+0x2e2/0x300 kernel/locking/lockdep.c:2043
check_noncircular+0x12e/0x150 kernel/locking/lockdep.c:2175
check_prev_add kernel/locking/lockdep.c:3165 [inline]
check_prevs_add kernel/locking/lockdep.c:3284 [inline]
validate_chain kernel/locking/lockdep.c:3908 [inline]
__lock_acquire+0x15a6/0x2cf0 kernel/locking/lockdep.c:5237
lock_acquire+0x107/0x340 kernel/locking/lockdep.c:5868
__mutex_lock_common kernel/locking/mutex.c:614 [inline]
__mutex_lock+0x187/0x1350 kernel/locking/mutex.c:776
io_uring_del_tctx_node+0xf0/0x2c0 io_uring/tctx.c:179
io_uring_clean_tctx+0xd4/0x1a0 io_uring/tctx.c:195
io_uring_cancel_generic+0x6ca/0x7d0 io_uring/cancel.c:646
io_uring_task_cancel include/linux/io_uring.h:24 [inline]
begin_new_exec+0x10ed/0x2440 fs/exec.c:1131
load_elf_binary+0x9f8/0x2d70 fs/binfmt_elf.c:1010
search_binary_handler fs/exec.c:1669 [inline]
exec_binprm fs/exec.c:1701 [inline]
bprm_execve+0x92e/0x1400 fs/exec.c:1753
do_execveat_common+0x510/0x6a0 fs/exec.c:1859
do_execve fs/exec.c:1933 [inline]
__do_sys_execve fs/exec.c:2009 [inline]
__se_sys_execve fs/exec.c:2004 [inline]
__x64_sys_execve+0x94/0xb0 fs/exec.c:2004
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xec/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7ff3a8b8f749
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ff3a9a97038 EFLAGS: 00000246 ORIG_RAX: 000000000000003b
RAX: ffffffffffffffda RBX: 00007ff3a8de5fa0 RCX: 00007ff3a8b8f749
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000200000000400
RBP: 00007ff3a8c13f91 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007ff3a8de6038 R14: 00007ff3a8de5fa0 R15: 00007ff3a8f0fa28
</TASK>
Add a separate lock just for the tctx_list, tctx_lock. This can nest
under ->uring_lock, where necessary, and be used separately for list
manipulation. For the cancelation off exec side, this removes the
need to grab ->uring_lock, hence fixing the circular locking
dependency.
Reported-by: syzbot+b0e3b77ffaa8a4067ce5@syzkaller.appspotmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
- alienware-wmi-wmax: Area-51, x16, and 16X Aurora laptops support
- asus-armoury:
- Fix FA507R PPT data
- Add TDP data for more laptop models
- asus-nb-wmi: Asus Zenbook 14 display toggle key support
- dell-lis3lv02d: Dell Latitude 5400 support
- hp-bioscfg: Fix out-of-bounds array access in ACPI package parsing
- ibm_rtl: Fix EBDA signature search pointer arithmetic
- ideapad-laptop: Reassign KEY_CUT to KEY_SELECTIVE_SCREENSHOT
- intel/pmt:
- Fix kobject memory leak on init failure
- Use valid pointers on error handling path
- intel/vsec: Correct kernel doc comments
- mellanox: mlxbf-pmc: Fix event names
- msi-laptop: Add sysfs_remove_group()
- samsumg-galaxybook: Do not cast pointer to a shorter type
- think-lmi: WMI certificate thumbprint support for ThinkCenter
- uniwill: Tuxedo Book BA15 Gen10 support
* tag 'platform-drivers-x86-v6.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (22 commits)
platform/x86: asus-armoury: add support for G835LW
platform/x86: asus-armoury: fix ppt data for FA507R
platform/x86/intel/pmt/discovery: use valid device pointer in dev_err_probe
platform/x86: hp-bioscfg: Fix out-of-bounds array access in ACPI package parsing
platform/x86: asus-armoury: add support for G615LR
platform/x86: asus-armoury: add support for FA608UM
platform/x86: asus-armoury: add support for GA403WR
platform/x86: asus-armoury: add support for GU605CR
platform/x86: ideapad-laptop: Reassign KEY_CUT to KEY_SELECTIVE_SCREENSHOT
platform/x86: samsung-galaxybook: Fix problematic pointer cast
platform/x86/intel/pmt: Fix kobject memory leak on init failure
platform/x86/intel/vsec: correct kernel-doc comments
platform/x86: ibm_rtl: fix EBDA signature search pointer arithmetic
platform/x86: msi-laptop: add missing sysfs_remove_group()
platform/x86: think-lmi: Add WMI certificate thumbprint support for ThinkCenter
platform/x86: dell-lis3lv02d: Add Latitude 5400
platform/mellanox: mlxbf-pmc: Remove trailing whitespaces from event names
platform/x86: asus-nb-wmi: Add keymap for display toggle
platform/x86/uniwill: Add TUXEDO Book BA15 Gen10
platform/x86: alienware-wmi-wmax: Add support for Alienware 16X Aurora
...
|
|
Pull VFIO fixes from Alex Williamson:
- Restrict ROM access to dword to resolve a regression introduced with
qword access seen on some Intel NICs. Update VGA region access to the
same given lack of precedent for 64-bit users (Kevin Tian)
- Fix missing .get_region_info_caps callback in the xe-vfio-pci variant
driver due to integration through the DRM tree (Michal Wajdeczko)
- Add aligned 64-bit access macros to tools/include/linux/types.h,
allowing removal of uapi/linux/type.h includes from various vfio
selftest, resolving redefinition warnings for integration with KVM
selftests (David Matlack)
- Fix error path memory leak in pds-vfio-pci variant driver (Zilin Guan)
- Fix error path use-after-free in xe-vfio-pci variant driver (Alper Ak)
* tag 'vfio-v6.19-rc4' of https://github.com/awilliam/linux-vfio:
vfio/xe: Fix use-after-free in xe_vfio_pci_alloc_file()
vfio/pds: Fix memory leak in pds_vfio_dirty_enable()
vfio: selftests: Drop <uapi/linux/types.h> includes
tools include: Add definitions for __aligned_{l,b}e64
vfio/xe: Add default handler for .get_region_info_caps
vfio/pci: Disable qword access to the VGA region
vfio/pci: Disable qword access to the PCI ROM bar
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"27 hotfixes. 12 are cc:stable, 18 are MM.
There's a patch series from Jiayuan Chen which fixes some
issues with KASAN and vmalloc. Apart from that it's the usual
shower of singletons - please see the respective changelogs
for details"
* tag 'mm-hotfixes-stable-2025-12-28-21-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (27 commits)
mm/ksm: fix pte_unmap_unlock of wrong address in break_ksm_pmd_entry
mm/page_owner: fix memory leak in page_owner_stack_fops->release()
mm/memremap: fix spurious large folio warning for FS-DAX
MAINTAINERS: notify the "Device Memory" community of memory hotplug changes
sparse: update MAINTAINERS info
mm/page_alloc: report 1 as zone_batchsize for !CONFIG_MMU
mm: consider non-anon swap cache folios in folio_expected_ref_count()
rust: maple_tree: rcu_read_lock() in destructor to silence lockdep
mm: memcg: fix unit conversion for K() macro in OOM log
mm: fixup pfnmap memory failure handling to use pgoff
tools/mm/page_owner_sort: fix timestamp comparison for stable sorting
selftests/mm: fix thread state check in uffd-unit-tests
kernel/kexec: fix IMA when allocation happens in CMA area
kernel/kexec: change the prototype of kimage_map_segment()
MAINTAINERS: add ABI headers to KHO and LIVE UPDATE
.mailmap: remove one of the entries for WangYuli
mm/damon/vaddr: fix missing pte_unmap_unlock in damos_va_migrate_pmd_entry()
MAINTAINERS: update one straggling entry for Bartosz Golaszewski
mm/page_alloc: change all pageblocks migrate type on coalescing
mm: leafops.h: correct kernel-doc function param. names
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core fixes from Danilo Krummrich:
- Introduce DMA Rust helpers to avoid build errors when !CONFIG_HAS_DMA
- Remove unnecessary (and hence incorrect) endian conversion in the
Rust PCI driver sample code
- Fix memory leak in the unwind path of debugfs_change_name()
- Support non-const struct software_node pointers in
SOFTWARE_NODE_REFERENCE(), after introducing _Generic()
- Avoid NULL pointer dereference in the unwind path of
simple_xattrs_free()
* tag 'driver-core-6.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core:
fs/kernfs: null-ptr deref in simple_xattrs_free()
software node: Also support referencing non-constant software nodes
debugfs: Fix memleak in debugfs_change_name().
samples: rust: fix endianness issue in rust_driver_pci
rust: dma: add helpers for architectures without CONFIG_HAS_DMA
|
|
virtio_features.h uses WARN_ON_ONCE and memset so it must
include linux/bug.h and linux/string.h
Message-ID: <579986aa9b8d023844990d2a0e267382f8ad85d5.1764873799.git.mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
virtio.h uses struct module, add a forward declaration to
make the header self-contained.
Message-ID: <9171b5cac60793eb59ab044c96ee038bf1363bee.1764873799.git.mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Commit 2b938e3db335 ("vfio/pci: Enable iowrite64 and ioread64 for vfio
pci") enables qword access to the PCI bar resources. However certain
devices (e.g. Intel X710) are observed with problem upon qword accesses
to the rom bar, e.g. triggering PCI aer errors.
This is triggered by Qemu which caches the rom content by simply does a
pread() of the remaining size until it gets the full contents. The other
bars would only perform operations at the same access width as their
guest drivers.
Instead of trying to identify all broken devices, universally disable
qword access to the rom bar i.e. going back to the old way which worked
reliably for years.
Reported-by: Farrah Chen <farrah.chen@intel.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220740
Fixes: 2b938e3db335 ("vfio/pci: Enable iowrite64 and ioread64 for vfio pci")
Cc: stable@vger.kernel.org
Signed-off-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Farrah Chen <farrah.chen@intel.com>
Link: https://lore.kernel.org/r/20251218081650.555015-2-kevin.tian@intel.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
|
|
Currently, folio_expected_ref_count() only adds references for the swap
cache if the folio is anonymous. However, according to the comment above
the definition of PG_swapcache in enum pageflags, shmem folios can also
have PG_swapcache set. This patch makes sure references for the swap
cache are added if folio_test_swapcache(folio) is true.
This issue was found when trying to hot-unplug memory in a QEMU/KVM
virtual machine. When initiating hot-unplug when most of the guest memory
is allocated, hot-unplug hangs partway through removal due to migration
failures. The following message would be printed several times, and would
be printed again about every five seconds:
[ 49.641309] migrating pfn b12f25 failed ret:7
[ 49.641310] page: refcount:2 mapcount:0 mapping:0000000033bd8fe2 index:0x7f404d925 pfn:0xb12f25
[ 49.641311] aops:swap_aops
[ 49.641313] flags: 0x300000000030508(uptodate|active|owner_priv_1|reclaim|swapbacked|node=0|zone=3)
[ 49.641314] raw: 0300000000030508 ffffed312c4bc908 ffffed312c4bc9c8 0000000000000000
[ 49.641315] raw: 00000007f404d925 00000000000c823b 00000002ffffffff 0000000000000000
[ 49.641315] page dumped because: migration failure
When debugging this, I found that these migration failures were due to
__migrate_folio() returning -EAGAIN for a small set of folios because the
expected reference count it calculates via folio_expected_ref_count() is
one less than the actual reference count of the folios. Furthermore, all
of the affected folios were not anonymous, but had the PG_swapcache flag
set, inspiring this patch. After applying this patch, the memory
hot-unplug behaves as expected.
I tested this on a machine running Ubuntu 24.04 with kernel version
6.8.0-90-generic and 64GB of memory. The guest VM is managed by libvirt
and runs Ubuntu 24.04 with kernel version 6.18 (though the head of the
mm-unstable branch as a Dec 16, 2025 was also tested and behaves the same)
and 48GB of memory. The libvirt XML definition for the VM can be found at
[1]. CONFIG_MHP_DEFAULT_ONLINE_TYPE_ONLINE_MOVABLE is set in the guest
kernel so the hot-pluggable memory is automatically onlined.
Below are the steps to reproduce this behavior:
1) Define and start and virtual machine
host$ virsh -c qemu:///system define ./test_vm.xml # test_vm.xml from [1]
host$ virsh -c qemu:///system start test_vm
2) Setup swap in the guest
guest$ sudo fallocate -l 32G /swapfile
guest$ sudo chmod 0600 /swapfile
guest$ sudo mkswap /swapfile
guest$ sudo swapon /swapfile
3) Use alloc_data [2] to allocate most of the remaining guest memory
guest$ ./alloc_data 45
4) In a separate guest terminal, monitor the amount of used memory
guest$ watch -n1 free -h
5) When alloc_data has finished allocating, initiate the memory
hot-unplug using the provided xml file [3]
host$ virsh -c qemu:///system detach-device test_vm ./remove.xml --live
After initiating the memory hot-unplug, you should see the amount of
available memory in the guest decrease, and the amount of used swap data
increase. If everything works as expected, when all of the memory is
unplugged, there should be around 8.5-9GB of data in swap. If the
unplugging is unsuccessful, the amount of used swap data will settle below
that. If that happens, you should be able to see log messages in dmesg
similar to the one posted above.
Link: https://lkml.kernel.org/r/20251216200727.2360228-1-bijan311@gmail.com
Link: https://github.com/BijanT/linux_patch_files/blob/main/test_vm.xml [1]
Link: https://github.com/BijanT/linux_patch_files/blob/main/alloc_data.c [2]
Link: https://github.com/BijanT/linux_patch_files/blob/main/remove.xml [3]
Fixes: 86ebd50224c0 ("mm: add folio_expected_ref_count() for reference count calculation")
Signed-off-by: Bijan Tabatabai <bijan311@gmail.com>
Acked-by: David Hildenbrand (Red Hat) <david@kernel.org>
Acked-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Shivank Garg <shivankg@amd.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Kairui Song <ryncsn@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The memory failure handling implementation for the PFNMAP memory with no
struct pages is faulty. The VA of the mapping is determined based on the
the PFN. It should instead be based on the file mapping offset.
At the occurrence of poison, the memory_failure_pfn is triggered on the
poisoned PFN. Introduce a callback function that allows mm to translate
the PFN to the corresponding file page offset. The kernel module using
the registration API must implement the callback function and provide the
translation. The translated value is then used to determine the VA
information and sending the SIGBUS to the usermode process mapped to the
poisoned PFN.
The callback is also useful for the driver to be notified of the poisoned
PFN, which may then track it.
Link: https://lkml.kernel.org/r/20251211070603.338701-2-ankita@nvidia.com
Fixes: 2ec41967189c ("mm: handle poisoning of pfn without struct pages")
Signed-off-by: Ankit Agrawal <ankita@nvidia.com>
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Matthew R. Ochs <mochs@nvidia.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Neo Jia <cjia@nvidia.com>
Cc: Vikram Sethi <vsethi@nvidia.com>
Cc: Yishai Hadas <yishaih@nvidia.com>
Cc: Zhi Wang <zhiw@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The kexec segment index will be required to extract the corresponding
information for that segment in kimage_map_segment(). Additionally,
kexec_segment already holds the kexec relocation destination address and
size. Therefore, the prototype of kimage_map_segment() can be changed.
Link: https://lkml.kernel.org/r/20251216014852.8737-1-piliu@redhat.com
Fixes: 07d24902977e ("kexec: enable CMA based contiguous allocation")
Signed-off-by: Pingfan Liu <piliu@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Mimi Zohar <zohar@linux.ibm.com>
Cc: Roberto Sassu <roberto.sassu@huawei.com>
Cc: Alexander Graf <graf@amazon.com>
Cc: Steven Chen <chenste@linux.microsoft.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Modify the kernel-doc function parameter names to prevent kernel-doc
warnings:
Warning: include/linux/leafops.h:135 function parameter 'entry' not
described in 'leafent_type'
Warning: include/linux/leafops.h:540 function parameter 'pte' not
described in 'pte_is_uffd_marker'
Link: https://lkml.kernel.org/r/20251214201517.2187051-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
A KASAN tag mismatch, possibly causing a kernel panic, can be observed
on systems with a tag-based KASAN enabled and with multiple NUMA nodes.
It was reported on arm64 and reproduced on x86. It can be explained in
the following points:
1. There can be more than one virtual memory chunk.
2. Chunk's base address has a tag.
3. The base address points at the first chunk and thus inherits
the tag of the first chunk.
4. The subsequent chunks will be accessed with the tag from the
first chunk.
5. Thus, the subsequent chunks need to have their tag set to
match that of the first chunk.
Refactor code by reusing __kasan_unpoison_vmalloc in a new helper in
preparation for the actual fix.
Link: https://lkml.kernel.org/r/eb61d93b907e262eefcaa130261a08bcb6c5ce51.1764874575.git.m.wieczorretman@pm.me
Fixes: 1d96320f8d53 ("kasan, vmalloc: add vmalloc tagging for SW_TAGS")
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Jiayuan Chen <jiayuan.chen@linux.dev>
Cc: Kees Cook <kees@kernel.org>
Cc: Marco Elver <elver@google.com>
Cc: "Uladzislau Rezki (Sony)" <urezki@gmail.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: <stable@vger.kernel.org> [6.1+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "kasan: vmalloc: Fixes for the percpu allocator and
vrealloc", v3.
Patches fix two issues related to KASAN and vmalloc.
The first one, a KASAN tag mismatch, possibly resulting in a kernel panic,
can be observed on systems with a tag-based KASAN enabled and with
multiple NUMA nodes. Initially it was only noticed on x86 [1] but later a
similar issue was also reported on arm64 [2].
Specifically the problem is related to how vm_structs interact with
pcpu_chunks - both when they are allocated, assigned and when pcpu_chunk
addresses are derived.
When vm_structs are allocated they are unpoisoned, each with a different
random tag, if vmalloc support is enabled along the KASAN mode. Later
when first pcpu chunk is allocated it gets its 'base_addr' field set to
the first allocated vm_struct. With that it inherits that vm_struct's
tag.
When pcpu_chunk addresses are later derived (by pcpu_chunk_addr(), for
example in pcpu_alloc_noprof()) the base_addr field is used and offsets
are added to it. If the initial conditions are satisfied then some of the
offsets will point into memory allocated with a different vm_struct. So
while the lower bits will get accurately derived the tag bits in the top
of the pointer won't match the shadow memory contents.
The solution (proposed at v2 of the x86 KASAN series [3]) is to unpoison
the vm_structs with the same tag when allocating them for the per cpu
allocator (in pcpu_get_vm_areas()).
The second one reported by syzkaller [4] is related to vrealloc and
happens because of random tag generation when unpoisoning memory without
allocating new pages. This breaks shadow memory tracking and needs to
reuse the existing tag instead of generating a new one. At the same time
an inconsistency in used flags is corrected.
This patch (of 3):
Syzkaller reported a memory out-of-bounds bug [4]. This patch fixes two
issues:
1. In vrealloc the KASAN_VMALLOC_VM_ALLOC flag is missing when
unpoisoning the extended region. This flag is required to correctly
associate the allocation with KASAN's vmalloc tracking.
Note: In contrast, vzalloc (via __vmalloc_node_range_noprof)
explicitly sets KASAN_VMALLOC_VM_ALLOC and calls
kasan_unpoison_vmalloc() with it. vrealloc must behave consistently --
especially when reusing existing vmalloc regions -- to ensure KASAN can
track allocations correctly.
2. When vrealloc reuses an existing vmalloc region (without allocating
new pages) KASAN generates a new tag, which breaks tag-based memory
access tracking.
Introduce KASAN_VMALLOC_KEEP_TAG, a new KASAN flag that allows reusing the
tag already attached to the pointer, ensuring consistent tag behavior
during reallocation.
Pass KASAN_VMALLOC_KEEP_TAG and KASAN_VMALLOC_VM_ALLOC to the
kasan_unpoison_vmalloc inside vrealloc_node_align_noprof().
Link: https://lkml.kernel.org/r/cover.1765978969.git.m.wieczorretman@pm.me
Link: https://lkml.kernel.org/r/38dece0a4074c43e48150d1e242f8242c73bf1a5.1764874575.git.m.wieczorretman@pm.me
Link: https://lore.kernel.org/all/e7e04692866d02e6d3b32bb43b998e5d17092ba4.1738686764.git.maciej.wieczor-retman@intel.com/ [1]
Link: https://lore.kernel.org/all/aMUrW1Znp1GEj7St@MiWiFi-R3L-srv/ [2]
Link: https://lore.kernel.org/all/CAPAsAGxDRv_uFeMYu9TwhBVWHCCtkSxoWY4xmFB_vowMbi8raw@mail.gmail.com/ [3]
Link: https://syzkaller.appspot.com/bug?extid=997752115a851cb0cf36 [4]
Fixes: a0309faf1cb0 ("mm: vmalloc: support more granular vrealloc() sizing")
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Co-developed-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Reported-by: syzbot+997752115a851cb0cf36@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/68e243a2.050a0220.1696c6.007d.GAE@google.com/T/
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Marco Elver <elver@google.com>
Cc: "Uladzislau Rezki (Sony)" <urezki@gmail.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
WARNING: include/linux/genalloc.h:52 function parameter 'start_addr' not described in 'genpool_algo_t'
Fixes: 52fbf1134d47 ("lib/genalloc.c: fix allocation of aligned buffer from non-aligned chunk")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lkml.kernel.org/r/20251127130624.563597e3@canb.auug.org.au
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Alexey Skidanov <alexey.skidanov@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Fix kernel-doc warnings in intel_vsec.h to eliminate all kernel-doc
warnings:
Warning: include/linux/intel_vsec.h:92 struct member 'read_telem' not
described in 'pmt_callbacks'
Warning: include/linux/intel_vsec.h:146 expecting prototype for struct
intel_sec_device. Prototype was for struct intel_vsec_device instead
Warning: include/linux/intel_vsec.h:146 struct member 'priv_data_size'
not described in 'intel_vsec_device'
In struct pmt_callbacks, correct the kernel-doc for @read_telem.
kernel-doc doesn't support documenting callback function parameters,
so drop the '@' signs on those and use "* *" to make them somewhat
readable in the produced documentation output.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20251216063801.2896495-1-rdunlap@infradead.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Fwnode references are be implemented differently if referenced node is a
software node. _Generic() is used to differentiate between the two cases
but only const software nodes were present in the selection. Also add
non-const software nodes.
Reported-by: Kenneth Crudup <kenny@panix.com>
Closes: https://lore.kernel.org/all/af773b82-bef2-4209-baaf-526d4661b7fc@panix.com/
Fixes: d7cdbbc93c56 ("software node: allow referencing firmware nodes")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-By: Kenneth R. Crudup <kenny@panix.com>
Tested-by: Mehdi Djait <mehdi.djait@linux.intel.com> # Dell XPS 9315
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Link: https://patch.msgid.link/20251219083638.2454138-1-sakari.ailus@linux.intel.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
- Fix FPU core dumps on certain CPU models
- Fix htmldocs build warning
- Export TLB tracing event name via header
- Remove unused constant from <linux/mm_types.h>
- Fix comments
- Fix whitespace noise in documentation
- Fix variadic structure's definition to un-confuse UBSAN
- Fix posted MSI interrupts irq_retrigger() bug
- Fix asm build failure with older GCC builds
* tag 'x86-urgent-2025-12-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bug: Fix old GCC compile fails
x86/msi: Make irq_retrigger() functional for posted MSI
x86/platform/uv: Fix UBSAN array-index-out-of-bounds
mm: Remove tlb_flush_reason::NR_TLB_FLUSH_REASONS from <linux/mm_types.h>
x86/mm/tlb/trace: Export the TLB_REMOTE_WRONG_CPU enum in <trace/events/tlb.h>
x86/sgx: Remove unmatched quote in __sgx_encl_extend function comment
x86/boot/Documentation: Fix whitespace noise in boot.rst
x86/fpu: Fix FPU state core dump truncation on CPUs with no extended xfeatures
x86/boot/Documentation: Fix htmldocs build warning due to malformed table in boot.rst
|
|
Work around clang problems with "=rm" asm constraint.
clang seems to always chose the memory output, while it is almost
always the worst choice.
Add ASM_OUTPUT_RM so that we can replace "=rm" constraint
where it matters for clang, while not penalizing gcc.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Suggested-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block fixes from Jens Axboe:
- ublk selftests for missing coverage
- two fixes for the block integrity code
- fix for the newly added newly added PR read keys ioctl, limiting the
memory that can be allocated
- work around for a deadlock that can occur with ublk, where partition
scanning ends up recursing back into file closure, which needs the
same mutex grabbed. Not the prettiest thing in the world, but an
acceptable work-around until we can eliminate the reliance on
disk->open_mutex for this
- fix for a race between enabling writeback throttling and new IO
submissions
- move a bit of bio flag handling code. No changes, but needed for a
patchset for a future kernel
- fix for an init time id leak failure in rnbd
- loop/zloop state check fix
* tag 'block-6.19-20251218' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
block: validate interval_exp integrity limit
block: validate pi_offset integrity limit
block: rnbd-clt: Fix leaked ID in init_dev()
ublk: fix deadlock when reading partition table
block: add allocation size check in blkdev_pr_read_keys()
Documentation: admin-guide: blockdev: replace zone_capacity with zone_capacity_mb when creating devices
zloop: use READ_ONCE() to read lo->lo_state in queue_rq path
loop: use READ_ONCE() to read lo->lo_state without locking
block: fix race between wbt_enable_default and IO submission
selftests: ublk: add user copy test cases
selftests: ublk: add support for user copy to kublk
selftests: ublk: forbid multiple data copy modes
selftests: ublk: don't share backing files between ublk servers
selftests: ublk: use auto_zc for PER_IO_DAEMON tests in stress_04
selftests: ublk: fix fio arguments in run_io_and_recover()
selftests: ublk: remove unused ios map in seq_io.bt
selftests: ublk: correct last_rw map type in seq_io.bt
selftests: ublk: fix overflow in ublk_queue_auto_zc_fallback()
block: move around bio flagging helpers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix three issues in the power capping code including one recent
regression and a runtime PM framework regression introduced during the
6.17 development cycle:
- Fix CPU hotplug locking deadlock reported by lockdep after a recent
update of the Intel RAPL power capping driver (Srinivas Pandruvada)
- Fix sscanf() error return value handling in the power capping core
and a race condition in register_control_type() (Sumeet Pawnikar)
- Fix a concurrent bit field update issue in the runtime PM core code
by only updating the bit field in question when runtime PM is
disabled (Rafael Wysocki)"
* tag 'pm-6.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
powercap: intel_rapl: Fix possible recursive lock warning
PM: runtime: Do not clear needs_force_resume with enabled runtime PM
powercap: fix sscanf() error return value handling
powercap: fix race condition in register_control_type()
|
|
clang needs __always_inline instead of inline, even for tiny helpers.
This saves some cycles in system call fast path, and saves 195 bytes
on x86_64 build:
$ size vmlinux.before vmlinux.after
text data bss dec hex filename
34652814 22291961 5875180 62819955 3be8e73 vmlinux.before
34652619 22291961 5875180 62819760 3be8db0 vmlinux.after
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251204153127.1321824-1-edumazet@google.com
|
|
With the RAPL PMU addition, there is a recursive locking when CPU online
callback function calls rapl_package_add_pmu(). Here cpu_hotplug_lock
is already acquired by cpuhp_thread_fun() and rapl_package_add_pmu()
tries to acquire again.
<4>[ 8.197433] ============================================
<4>[ 8.197437] WARNING: possible recursive locking detected
<4>[ 8.197440] 6.19.0-rc1-lgci-xe-xe-4242-05b7c58b3367dca84+ #1 Not tainted
<4>[ 8.197444] --------------------------------------------
<4>[ 8.197447] cpuhp/0/20 is trying to acquire lock:
<4>[ 8.197450] ffffffff83487870 (cpu_hotplug_lock){++++}-{0:0}, at:
rapl_package_add_pmu+0x37/0x370 [intel_rapl_common]
<4>[ 8.197463]
but task is already holding lock:
<4>[ 8.197466] ffffffff83487870 (cpu_hotplug_lock){++++}-{0:0}, at:
cpuhp_thread_fun+0x6d/0x290
<4>[ 8.197477]
other info that might help us debug this:
<4>[ 8.197480] Possible unsafe locking scenario:
<4>[ 8.197483] CPU0
<4>[ 8.197485] ----
<4>[ 8.197487] lock(cpu_hotplug_lock);
<4>[ 8.197490] lock(cpu_hotplug_lock);
<4>[ 8.197493]
*** DEADLOCK ***
..
..
<4>[ 8.197542] __lock_acquire+0x146e/0x2790
<4>[ 8.197548] lock_acquire+0xc4/0x2c0
<4>[ 8.197550] ? rapl_package_add_pmu+0x37/0x370 [intel_rapl_common]
<4>[ 8.197556] cpus_read_lock+0x41/0x110
<4>[ 8.197558] ? rapl_package_add_pmu+0x37/0x370 [intel_rapl_common]
<4>[ 8.197561] rapl_package_add_pmu+0x37/0x370 [intel_rapl_common]
<4>[ 8.197565] rapl_cpu_online+0x85/0x87 [intel_rapl_msr]
<4>[ 8.197568] ? __pfx_rapl_cpu_online+0x10/0x10 [intel_rapl_msr]
<4>[ 8.197570] cpuhp_invoke_callback+0x41f/0x6c0
<4>[ 8.197573] ? cpuhp_thread_fun+0x6d/0x290
<4>[ 8.197575] cpuhp_thread_fun+0x1e2/0x290
<4>[ 8.197578] ? smpboot_thread_fn+0x26/0x290
<4>[ 8.197581] smpboot_thread_fn+0x12f/0x290
<4>[ 8.197584] ? __pfx_smpboot_thread_fn+0x10/0x10
<4>[ 8.197586] kthread+0x11f/0x250
<4>[ 8.197589] ? __pfx_kthread+0x10/0x10
<4>[ 8.197592] ret_from_fork+0x344/0x3a0
<4>[ 8.197595] ? __pfx_kthread+0x10/0x10
<4>[ 8.197597] ret_from_fork_asm+0x1a/0x30
<4>[ 8.197604] </TASK>
Fix this issue in the same way as rapl powercap package domain is added
from the same CPU online callback by introducing another interface which
doesn't call cpus_read_lock(). Add rapl_package_add_pmu_locked() and
rapl_package_remove_pmu_locked() which don't call cpus_read_lock().
Fixes: 748d6ba43afd ("powercap: intel_rapl: Enable MSR-based RAPL PMU support")
Reported-by: Borah, Chaitanya Kumar <chaitanya.kumar.borah@intel.com>
Closes: https://lore.kernel.org/linux-pm/5427ede1-57a0-43d1-99f3-8ca4b0643e82@intel.com/T/#u
Tested-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Tested-by: RavitejaX Veesam <ravitejax.veesam@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20251217153455.3560176-1-srinivas.pandruvada@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Pull bpf fixes from Alexei Starovoitov:
- Fix BPF builds due to -fms-extensions. selftests (Alexei
Starovoitov), bpftool (Quentin Monnet).
- Fix build of net/smc when CONFIG_BPF_SYSCALL=y, but CONFIG_BPF_JIT=n
(Geert Uytterhoeven)
- Fix livepatch/BPF interaction and support reliable unwinding through
BPF stack frames (Josh Poimboeuf)
- Do not audit capability check in arm64 JIT (Ondrej Mosnacek)
- Fix truncated dmabuf BPF iterator reads (T.J. Mercier)
- Fix verifier assumptions of bpf_d_path's output buffer (Shuran Liu)
- Fix warnings in libbpf when built with -Wdiscarded-qualifiers under
C23 (Mikhail Gavrilov)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: add regression test for bpf_d_path()
bpf: Fix verifier assumptions of bpf_d_path's output buffer
selftests/bpf: Add test for truncated dmabuf_iter reads
bpf: Fix truncated dmabuf iterator reads
x86/unwind/orc: Support reliable unwinding through BPF stack frames
bpf: Add bpf_has_frame_pointer()
bpf, arm64: Do not audit capability check in do_jit()
libbpf: Fix -Wdiscarded-qualifiers under C23
bpftool: Fix build warnings due to MS extensions
net: smc: SMC_HS_CTRL_BPF should depend on BPF_JIT
selftests/bpf: Add -fms-extensions to bpf build flags
|
|
Pull shmem rename fixes from Al Viro:
"A couple of shmem rename fixes - recent regression from tree-in-dcache
series and older breakage from stable directory offsets stuff"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
shmem: fix recovery on rename failures
shmem_whiteout(): fix regression from tree-in-dcache series
|
|
maple_tree insertions can fail if we are seriously short on memory;
simple_offset_rename() does not recover well if it runs into that.
The same goes for simple_offset_rename_exchange().
Moreover, shmem_whiteout() expects that if it succeeds, the caller will
progress to d_move(), i.e. that shmem_rename2() won't fail past the
successful call of shmem_whiteout().
Not hard to fix, fortunately - mtree_store() can't fail if the index we
are trying to store into is already present in the tree as a singleton.
For simple_offset_rename_exchange() that's enough - we just need to be
careful about the order of operations.
For simple_offset_rename() solution is to preinsert the target into the
tree for new_dir; the rest can be done without any potentially failing
operations.
That preinsertion has to be done in shmem_rename2() rather than in
simple_offset_rename() itself - otherwise we'd need to deal with the
possibility of failure after successful shmem_whiteout().
Fixes: a2e459555c5f ("shmem: stable directory offsets")
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Requesting a delegation on a file from the userland fcntl() interface
currently succeeds when there are conflicting opens present.
This is because the lease handling code ignores conflicting opens for
FL_LAYOUT and FL_DELEG leases. This was a hack put in place long ago,
because nfsd already checks for conflicts in its own way. The kernel
needs to perform this check for userland delegations the same way it is
done for leases, however.
Make this dependent on the lease_manager by adding a new
->lm_open_conflict() lease_manager operation and have
generic_add_lease() call that instead of check_conflicting_open().
Morph check_conflicting_open() into a ->lm_open_conflict() op that is
only called for userland leases/delegations. Set the
->lm_open_conflict() operations for nfsd to trivial functions that
always return 0.
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20251204-dir-deleg-ro-v2-2-22d37f92ce2c@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Zhang Yi points out that the dynamic folio_batch allocation in
iomap_fill_dirty_folios() is problematic for the ext4 on iomap work
that is under development because it doesn't sufficiently handle the
allocation failure case (by allowing a retry, for example). We've
also seen lockdep (via syzbot) complain recently about the scope of
the allocation.
The dynamic allocation was initially added for simplicity and to
help indicate whether the batch was used or not by the calling fs.
To address these issues, put the batch on the stack of
iomap_zero_range() and use a flag to control whether the batch
should be used in the iomap folio lookup path. This keeps things
simple and eliminates allocation issues with lockdep and for ext4 on
iomap.
While here, also clean up the fill helper signature to be more
consistent with the underlying filemap helper. Pass through the
return value of the filemap helper (folio count) and update the
lookup offset via an out param.
Fixes: 395ed1ef0012 ("iomap: optional zero range dirty folio processing")
Signed-off-by: Brian Foster <bfoster@redhat.com>
Link: https://patch.msgid.link/20251208140548.373411-1-bfoster@redhat.com
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Ingo Molnar:
- Fix error code in the irqchip/mchp-eic driver
- Fix setup_percpu_irq() affinity assumptions
- Remove the unused irq_domain_add_tree() function
* tag 'irq-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/mchp-eic: Fix error code in mchp_eic_domain_alloc()
irqdomain: Delete irq_domain_add_tree()
genirq: Allow NULL affinity for setup_percpu_irq()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc core fixes from Ingo Molnar:
- Improve bug reporting
- Suppress W=1 format warning
- Improve rseq scalability on Clang builds
* tag 'core-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rseq: Always inline rseq_debug_syscall_return()
bug: Hush suggest-attribute=format for __warn_printf()
bug: Let report_bug_entry() provide the correct bugaddr
|
|
This has been unused since it was added 11 years ago in:
d17d8f9dedb9 ("x86/mm: Add tracepoints for TLB flushes")
Signed-off-by: Tal Zussman <tz2294@columbia.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Rik van Riel <riel@surriel.com>
Acked-by: David Hildenbrand <david@redhat.com>
Link: https://patch.msgid.link/20251212-tlb-trace-fix-v2-2-d322e0ad9b69@columbia.edu
|
