| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Remove a left-over from commit 2874c5fd2842 ("treewide: Replace GPLv2
boilerplate/reference with SPDX - rule 152")
There is no need for an empty "License:".
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/0e5ff727626b748238f4b78932f81572143d8f0b.1662896317.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add new APIs in firmware to configure SD/GEM registers. Internally
it calls PM IOCTL for below SD/GEM register configuration:
- SD/EMMC select
- SD slot type
- SD base clock
- SD 8 bit support
- SD fixed config
- GEM SGMII Mode
- GEM fixed config
Signed-off-by: Ronak Jain <ronak.jain@xilinx.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some network drivers use __dev_mc_sync()/__dev_uc_sync() and therefore
program the hardware only with addresses with a non-zero sync_cnt.
Some of the above drivers also need to save/restore the address
filtering lists when certain events happen, and they need to walk
through the struct net_device :: uc and struct net_device :: mc lists.
But these lists contain unsynced addresses too.
To keep the appearance of an elementary form of data encapsulation,
provide iterators through these lists that only look at entries with a
non-zero sync_cnt, instead of filtering entries out from device drivers.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Lee Jones says:
====================
Immutable branch between MFD, Net and Pinctrl due for the v6.0 merge window
* tag 'ib-mfd-net-pinctrl-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
mfd: ocelot: Add support for the vsc7512 chip via spi
dt-bindings: mfd: ocelot: Add bindings for VSC7512
resource: add define macro for register address resources
pinctrl: microchip-sgpio: add ability to be used in a non-mmio configuration
pinctrl: microchip-sgpio: allow sgpio driver to be used as a module
pinctrl: ocelot: add ability to be used in a non-mmio configuration
net: mdio: mscc-miim: add ability to be used in a non-mmio configuration
mfd: ocelot: Add helper to get regmap from a resource
====================
Link: https://lore.kernel.org/r/YxrjyHcceLOFlT/c@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
Sept. 15, 2022, 8:19 a.m. UTC
Hello Jakub, hello David,
this is a pull request of 23 patches for net-next/master.
the first 2 patches are by me and fix a typo in the rx-offload helper
and the flexcan driver.
Christophe JAILLET's patch cleans up the error handling in
rcar_canfd driver's probe function.
Kenneth Lee's patch converts the kvaser_usb driver from kcalloc() to
kzalloc().
Biju Das contributes 2 patches to the sja1000 driver which update the
DT bindings and support for the RZ/N1 SJA1000 CAN controller.
Jinpeng Cui provides 2 patches that remove redundant variables from
the sja1000 and kvaser_pciefd driver.
2 patches by John Whittington and me add hardware timestamp support to
the gs_usb driver.
Gustavo A. R. Silva's patch converts the etas_es58x driver to make use
of DECLARE_FLEX_ARRAY().
Krzysztof Kozlowski's patch cleans up the sja1000 DT bindings.
Dario Binacchi fixes his invalid email in the flexcan driver
documentation.
Ziyang Xuan contributes 2 patches that clean up the CAN RAW protocol.
Yang Yingliang's patch switches the flexcan driver to dev_err_probe().
The last 7 patches are by Oliver Hartkopp and add support for the next
generation of the CAN protocol: CAN with eXtended data Length (CAN XL).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This was intended to be "maxpages" instead of INT_MAX. There is only
one caller and it passes INT_MAX so this does not affect runtime.
Fixes: b93235e68921 ("tls: cap the output scatter list to something reasonable")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Make use of new can_skb_get_data_len() helper.
Add support for variable CANXL MTU using the new can_is_canxl_dev_mtu().
Acked-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/all/20220912170725.120748-7-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
- add new ETH_P_CANXL ethernet protocol type
- update skb checks for CAN XL
- add alloc_canxl_skb() which now needs a data length parameter
- introduce init_can_skb_reserve() to reduce code duplication
Acked-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/all/20220912170725.120748-6-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Add two helpers to retrieve the data length from CAN sk_buffs and prepare
the length information to be a uint16 value for the CAN XL support.
Acked-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/all/20220912170725.120748-3-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Replace open coded checks for sk_buffs containing Classical CAN and
CAN FD frame structures as a preparation for CAN XL support.
With the added length check the unintended processing of CAN XL frames
having the CANXL_XLF bit set can be suppressed even when the skb->len
fits to non CAN XL frames.
The CAN_RAW socket needs a rework to use these helpers. Therefore the
use of these helpers is postponed to the CAN_RAW CAN XL integration.
The J1939 protocol gets a check for Classical CAN frames too.
Acked-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/all/20220912170725.120748-2-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
DEFINE_RES_ macros have been created for the commonly used resource types,
but not IORESOURCE_REG. Add the macro so it can be used in a similar manner
to all other resource types.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20220905162132.2943088-7-colin.foster@in-advantage.com
|
|
Several ocelot-related modules are designed for MMIO / regmaps. As such,
they often use a combination of devm_platform_get_and_ioremap_resource()
and devm_regmap_init_mmio().
Operating in an MFD might be different, in that it could be memory mapped,
or it could be SPI, I2C... In these cases a fallback to use IORESOURCE_REG
instead of IORESOURCE_MEM becomes necessary.
When this happens, there's redundant logic that needs to be implemented in
every driver. In order to avoid this redundancy, utilize a single function
that, if the MFD scenario is enabled, will perform this fallback logic.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20220905162132.2943088-2-colin.foster@in-advantage.com
|
|
drivers/net/ethernet/freescale/fec.h
7d650df99d52 ("net: fec: add pm_qos support on imx6q platform")
40c79ce13b03 ("net: fec: add stop mode support for imx8 platform")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from rxrpc, netfilter, wireless and bluetooth
subtrees.
Current release - regressions:
- skb: export skb drop reaons to user by TRACE_DEFINE_ENUM
- bluetooth: fix regression preventing ACL packet transmission
Current release - new code bugs:
- dsa: microchip: fix kernel oops on ksz8 switches
- dsa: qca8k: fix NULL pointer dereference for
of_device_get_match_data
Previous releases - regressions:
- netfilter: clean up hook list when offload flags check fails
- wifi: mt76: fix crash in chip reset fail
- rxrpc: fix ICMP/ICMP6 error handling
- ice: fix DMA mappings leak
- i40e: fix kernel crash during module removal
Previous releases - always broken:
- ipv6: sr: fix out-of-bounds read when setting HMAC data.
- tcp: TX zerocopy should not sense pfmemalloc status
- sch_sfb: don't assume the skb is still around after
enqueueing to child
- netfilter: drop dst references before setting
- wifi: wilc1000: fix DMA on stack objects
- rxrpc: fix an insufficiently large sglist in
rxkad_verify_packet_2()
- fec: use a spinlock to guard `fep->ptp_clk_on`
Misc:
- usb: qmi_wwan: add Quectel RM520N"
* tag 'net-6.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (50 commits)
sch_sfb: Also store skb len before calling child enqueue
net: phy: lan87xx: change interrupt src of link_up to comm_ready
net/smc: Fix possible access to freed memory in link clear
net: ethernet: mtk_eth_soc: check max allowed hash in mtk_ppe_check_skb
net: skb: export skb drop reaons to user by TRACE_DEFINE_ENUM
net: ethernet: mtk_eth_soc: fix typo in __mtk_foe_entry_clear
net: dsa: felix: access QSYS_TAG_CONFIG under tas_lock in vsc9959_sched_speed_set
net: dsa: felix: disable cut-through forwarding for frames oversized for tc-taprio
net: dsa: felix: tc-taprio intervals smaller than MTU should send at least one packet
net: usb: qmi_wwan: add Quectel RM520N
net: dsa: qca8k: fix NULL pointer dereference for of_device_get_match_data
tcp: fix early ETIMEDOUT after spurious non-SACK RTO
stmmac: intel: Simplify intel_eth_pci_remove()
net: mvpp2: debugfs: fix memory leak when using debugfs_lookup()
ipv6: sr: fix out-of-bounds read when setting HMAC data.
bonding: accept unsolicited NA message
bonding: add all node mcast address when slave up
bonding: use unspecified address if no available link local address
wifi: use struct_group to copy addresses
wifi: mac80211_hwsim: check length for virtio packets
...
|
|
Commit d4252071b97d ("add barriers to buffer_uptodate and
set_buffer_uptodate") added proper memory barriers to the buffer head
BH_Uptodate bit, so that anybody who tests a buffer for being up-to-date
will be guaranteed to actually see initialized state.
However, that commit didn't _just_ add the memory barrier, it also ended
up dropping the "was it already set" logic that the BUFFER_FNS() macro
had.
That's conceptually the right thing for a generic "this is a memory
barrier" operation, but in the case of the buffer contents, we really
only care about the memory barrier for the _first_ time we set the bit,
in that the only memory ordering protection we need is to avoid anybody
seeing uninitialized memory contents.
Any other access ordering wouldn't be about the BH_Uptodate bit anyway,
and would require some other proper lock (typically BH_Lock or the folio
lock). A reader that races with somebody invalidating the buffer head
isn't an issue wrt the memory ordering, it's a serialization issue.
Now, you'd think that the buffer head operations don't matter in this
day and age (and I certainly thought so), but apparently some loads
still end up being heavy users of buffer heads. In particular, the
kernel test robot reported that not having this bit access optimization
in place caused a noticeable direct IO performance regression on ext4:
fxmark.ssd_ext4_no_jnl_DWTL_54_directio.works/sec -26.5% regression
although you presumably need a fast disk and a lot of cores to actually
notice.
Link: https://lore.kernel.org/all/Yw8L7HTZ%2FdE2%2Fo9C@xsang-OptiPlex-9020/
Reported-by: kernel test robot <oliver.sang@intel.com>
Tested-by: Fengwei Yin <fengwei.yin@intel.com>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add new namespace for MACsec RX flows.
Encrypted MACsec packets should be first decrypted and stripped
from MACsec header and then continues with the kernel's steering
pipeline.
Signed-off-by: Lior Nahmanson <liorna@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Tx flow steering consists of two flow tables (FTs).
The first FT (crypto table) has two fixed rules:
One default miss rule so non MACsec offloaded packets bypass the MACSec
tables, another rule to make sure that MACsec key exchange (MKE) traffic
passes unencrypted as expected (matched of ethertype).
On each new MACsec offload flow, a new MACsec rule is added.
This rule is matched on metadata_reg_a (which contains the id of the
flow) and invokes the MACsec offload action on match.
The second FT (check table) has two fixed rules:
One rule for verifying that the previous offload actions were
finished successfully and packet need to be transmitted.
Another default rule for dropping packets that were failed in the
offload actions.
The MACsec FTs should be created on demand when the first MACsec rule is
added and destroyed when the last MACsec rule is deleted.
Signed-off-by: Lior Nahmanson <liorna@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Changed EGRESS_KERNEL namespace to EGRESS_IPSEC and add new
namespace for MACsec TX.
This namespace should be the last namespace for transmitted packets.
Signed-off-by: Lior Nahmanson <liorna@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add MACsec offload related IFC structs, layouts and enumerations.
Signed-off-by: Lior Nahmanson <liorna@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In order to support MACsec offload (and maybe some other crypto features
in the future), generalize flow action parameters / defines to be used by
crypto offlaods other than IPsec.
The following changes made:
ipsec_obj_id field at flow action context was changed to crypto_obj_id,
intreduced a new crypto_type field where IPsec is the default zero type
for backward compatibility.
Action ipsec_decrypt was changed to crypto_decrypt.
Action ipsec_encrypt was changed to crypto_encrypt.
IPsec offload code was updated accordingly for backward compatibility.
Signed-off-by: Lior Nahmanson <liorna@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
esp_id is no longer in used
Signed-off-by: Lior Nahmanson <liorna@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull ARM fix from Russell King:
"Just one fix for now for the AMBA bus code from Isaac Manjarres"
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9229/1: amba: Fix use-after-free in amba_read_periphid()
|
|
Daniel Borkmann says:
====================
pull-request: bpf-next 2022-09-05
The following pull-request contains BPF updates for your *net-next* tree.
We've added 106 non-merge commits during the last 18 day(s) which contain
a total of 159 files changed, 5225 insertions(+), 1358 deletions(-).
There are two small merge conflicts, resolve them as follows:
1) tools/testing/selftests/bpf/DENYLIST.s390x
Commit 27e23836ce22 ("selftests/bpf: Add lru_bug to s390x deny list") in
bpf tree was needed to get BPF CI green on s390x, but it conflicted with
newly added tests on bpf-next. Resolve by adding both hunks, result:
[...]
lru_bug # prog 'printk': failed to auto-attach: -524
setget_sockopt # attach unexpected error: -524 (trampoline)
cb_refs # expected error message unexpected error: -524 (trampoline)
cgroup_hierarchical_stats # JIT does not support calling kernel function (kfunc)
htab_update # failed to attach: ERROR: strerror_r(-524)=22 (trampoline)
[...]
2) net/core/filter.c
Commit 1227c1771dd2 ("net: Fix data-races around sysctl_[rw]mem_(max|default).")
from net tree conflicts with commit 29003875bd5b ("bpf: Change bpf_setsockopt(SOL_SOCKET)
to reuse sk_setsockopt()") from bpf-next tree. Take the code as it is from
bpf-next tree, result:
[...]
if (getopt) {
if (optname == SO_BINDTODEVICE)
return -EINVAL;
return sk_getsockopt(sk, SOL_SOCKET, optname,
KERNEL_SOCKPTR(optval),
KERNEL_SOCKPTR(optlen));
}
return sk_setsockopt(sk, SOL_SOCKET, optname,
KERNEL_SOCKPTR(optval), *optlen);
[...]
The main changes are:
1) Add any-context BPF specific memory allocator which is useful in particular for BPF
tracing with bonus of performance equal to full prealloc, from Alexei Starovoitov.
2) Big batch to remove duplicated code from bpf_{get,set}sockopt() helpers as an effort
to reuse the existing core socket code as much as possible, from Martin KaFai Lau.
3) Extend BPF flow dissector for BPF programs to just augment the in-kernel dissector
with custom logic. In other words, allow for partial replacement, from Shmulik Ladkani.
4) Add a new cgroup iterator to BPF with different traversal options, from Hao Luo.
5) Support for BPF to collect hierarchical cgroup statistics efficiently through BPF
integration with the rstat framework, from Yosry Ahmed.
6) Support bpf_{g,s}et_retval() under more BPF cgroup hooks, from Stanislav Fomichev.
7) BPF hash table and local storages fixes under fully preemptible kernel, from Hou Tao.
8) Add various improvements to BPF selftests and libbpf for compilation with gcc BPF
backend, from James Hilliard.
9) Fix verifier helper permissions and reference state management for synchronous
callbacks, from Kumar Kartikeya Dwivedi.
10) Add support for BPF selftest's xskxceiver to also be used against real devices that
support MAC loopback, from Maciej Fijalkowski.
11) Various fixes to the bpf-helpers(7) man page generation script, from Quentin Monnet.
12) Document BPF verifier's tnum_in(tnum_range(), ...) gotchas, from Shung-Hsi Yu.
13) Various minor misc improvements all over the place.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (106 commits)
bpf: Optimize rcu_barrier usage between hash map and bpf_mem_alloc.
bpf: Remove usage of kmem_cache from bpf_mem_cache.
bpf: Remove prealloc-only restriction for sleepable bpf programs.
bpf: Prepare bpf_mem_alloc to be used by sleepable bpf programs.
bpf: Remove tracing program restriction on map types
bpf: Convert percpu hash map to per-cpu bpf_mem_alloc.
bpf: Add percpu allocation support to bpf_mem_alloc.
bpf: Batch call_rcu callbacks instead of SLAB_TYPESAFE_BY_RCU.
bpf: Adjust low/high watermarks in bpf_mem_cache
bpf: Optimize call_rcu in non-preallocated hash map.
bpf: Optimize element count in non-preallocated hash map.
bpf: Relax the requirement to use preallocated hash maps in tracing progs.
samples/bpf: Reduce syscall overhead in map_perf_test.
selftests/bpf: Improve test coverage of test_maps
bpf: Convert hash map to bpf_mem_alloc.
bpf: Introduce any context BPF specific memory allocator.
selftest/bpf: Add test for bpf_getsockopt()
bpf: Change bpf_getsockopt(SOL_IPV6) to reuse do_ipv6_getsockopt()
bpf: Change bpf_getsockopt(SOL_IP) to reuse do_ip_getsockopt()
bpf: Change bpf_getsockopt(SOL_TCP) to reuse do_tcp_getsockopt()
...
====================
Link: https://lore.kernel.org/r/20220905161136.9150-1-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
User space might be creating and destroying a lot of hash maps. Synchronous
rcu_barrier-s in a destruction path of hash map delay freeing of hash buckets
and other map memory and may cause artificial OOM situation under stress.
Optimize rcu_barrier usage between bpf hash map and bpf_mem_alloc:
- remove rcu_barrier from hash map, since htab doesn't use call_rcu
directly and there are no callback to wait for.
- bpf_mem_alloc has call_rcu_in_progress flag that indicates pending callbacks.
Use it to avoid barriers in fast path.
- When barriers are needed copy bpf_mem_alloc into temp structure
and wait for rcu barrier-s in the worker to let the rest of
hash map freeing to proceed.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220902211058.60789-17-alexei.starovoitov@gmail.com
|
|
Extend bpf_mem_alloc to cache free list of fixed size per-cpu allocations.
Once such cache is created bpf_mem_cache_alloc() will return per-cpu objects.
bpf_mem_cache_free() will free them back into global per-cpu pool after
observing RCU grace period.
per-cpu flavor of bpf_mem_alloc is going to be used by per-cpu hash maps.
The free list cache consists of tuples { llist_node, per-cpu pointer }
Unlike alloc_percpu() that returns per-cpu pointer
the bpf_mem_cache_alloc() returns a pointer to per-cpu pointer and
bpf_mem_cache_free() expects to receive it back.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220902211058.60789-11-alexei.starovoitov@gmail.com
|
|
Tracing BPF programs can attach to kprobe and fentry. Hence they
run in unknown context where calling plain kmalloc() might not be safe.
Front-end kmalloc() with minimal per-cpu cache of free elements.
Refill this cache asynchronously from irq_work.
BPF programs always run with migration disabled.
It's safe to allocate from cache of the current cpu with irqs disabled.
Free-ing is always done into bucket of the current cpu as well.
irq_work trims extra free elements from buckets with kfree
and refills them with kmalloc, so global kmalloc logic takes care
of freeing objects allocated by one cpu and freed on another.
struct bpf_mem_alloc supports two modes:
- When size != 0 create kmem_cache and bpf_mem_cache for each cpu.
This is typical bpf hash map use case when all elements have equal size.
- When size == 0 allocate 11 bpf_mem_cache-s for each cpu, then rely on
kmalloc/kfree. Max allocation size is 4096 in this case.
This is bpf_dynptr and bpf_kptr use case.
bpf_mem_alloc/bpf_mem_free are bpf specific 'wrappers' of kmalloc/kfree.
bpf_mem_cache_alloc/bpf_mem_cache_free are 'wrappers' of kmem_cache_alloc/kmem_cache_free.
The allocators are NMI-safe from bpf programs only. They are not NMI-safe in general.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220902211058.60789-2-alexei.starovoitov@gmail.com
|
|
Add 1000BASE-KX interface mode. This 1G backplane ethernet as described in
clause 70. Clause 73 autonegotiation is mandatory, and only full duplex
operation is supported.
Although at the PMA level this interface mode is identical to
1000BASE-X, it uses a different form of in-band autonegation. This
justifies a separate interface mode, since the interface mode (along
with the MLO_AN_* autonegotiation mode) sets the type of autonegotiation
which will be used on a link. This results in more than just electrical
differences between the link modes.
With regard to 1000BASE-X, 1000BASE-KX holds a similar position to
SGMII: same signaling, but different autonegotiation. PCS drivers
(which typically handle in-band autonegotiation) may only support
1000BASE-X, and not 1000BASE-KX. Similarly, the phy mode is used to
configure serdes phys with phy_set_mode_ext. Due to the different
electrical standards (SFI or XFI vs Clause 70), they will likely want to
use different configuration. Adding a phy interface mode for
1000BASE-KX helps simplify configuration in these areas.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The Altera Triple Speed Ethernet has a SGMII/1000BaseC PCS that can be
integrated in several ways. It can either be part of the TSE MAC's
address space, accessed through 32 bits accesses on the mapped mdio
device 0, or through a dedicated 16 bits register set.
This driver allows using the TSE PCS outside of altera TSE's driver,
since it can be used standalone by other MACs.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes berg says:
====================
We have a handful of fixes:
- fix DMA from stack in wilc1000 driver
- fix crash on chip reset failure in mt7921e
- fix for the reported warning on aggregation timer expiry
- check packet lengths in hwsim virtio paths
- fix compiler warnings/errors with AAD construction by
using struct_group
- fix Intel 4965 driver rate scale operation
- release channel contexts correctly in mac80211 mlme code
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are some small tty/serial/vt driver fixes for 6.0-rc4 that
resolve a number of reported issues:
- n_gsm fixups for previous changes that caused problems
- much-reported serdev crash fix that showed up in 6.0-rc1
- vt font selection bugfix
- kerneldoc build warning fixes
- other tiny serial core fixes
All of these have been in linux-next for a while with no reported
problems"
* tag 'tty-6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: n_gsm: avoid call of sleeping functions from atomic context
tty: n_gsm: replace kicktimer with delayed_work
tty: n_gsm: initialize more members at gsm_alloc_mux()
tty: n_gsm: add sanity check for gsm->receive in gsm_receive_buf()
tty: serial: atmel: Preserve previous USART mode if RS485 disabled
tty: serial: lpuart: disable flow control while waiting for the transmit engine to complete
tty: Fix lookahead_buf crash with serdev
serial: fsl_lpuart: RS485 RTS polariy is inverse
vt: Clear selection before changing the font
serial: document start_rx member at struct uart_ops
|
|
We sometimes copy all the addresses from the 802.11 header
for the AAD, which may cause complaints from fortify checks.
Use struct_group() to avoid the compiler warnings/errors.
Change-Id: Ic3ea389105e7813b22095b295079eecdabde5045
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Similar to the earlier patch that changes sk_getsockopt() to
take the sockptr_t argument . This patch also changes
do_ipv6_getsockopt() to take the sockptr_t argument such that
a latter patch can make bpf_getsockopt(SOL_IPV6) to reuse
do_ipv6_getsockopt().
Note on the change in ip6_mc_msfget(). This function is to
return an array of sockaddr_storage in optval. This function
is shared between ipv6_get_msfilter() and compat_ipv6_get_msfilter().
However, the sockaddr_storage is stored at different offset of the
optval because of the difference between group_filter and
compat_group_filter. Thus, a new 'ss_offset' argument is
added to ip6_mc_msfget().
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20220902002853.2892532-1-kafai@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Similar to the earlier patch that changes sk_getsockopt() to
take the sockptr_t argument. This patch also changes
do_ip_getsockopt() to take the sockptr_t argument such that
a latter patch can make bpf_getsockopt(SOL_IP) to reuse
do_ip_getsockopt().
Note on the change in ip_mc_gsfget(). This function is to
return an array of sockaddr_storage in optval. This function
is shared between ip_get_mcast_msfilter() and
compat_ip_get_mcast_msfilter(). However, the sockaddr_storage
is stored at different offset of the optval because of
the difference between group_filter and compat_group_filter.
Thus, a new 'ss_offset' argument is added to ip_mc_gsfget().
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20220902002828.2890585-1-kafai@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This patch changes sk_getsockopt() to take the sockptr_t argument
such that it can be used by bpf_getsockopt(SOL_SOCKET) in a
latter patch.
security_socket_getpeersec_stream() is not changed. It stays
with the __user ptr (optval.user and optlen.user) to avoid changes
to other security hooks. bpf_getsockopt(SOL_SOCKET) also does not
support SO_PEERSEC.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20220902002802.2888419-1-kafai@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are some small driver core fixes for some oft-reported problems
in 6.0-rc1. They include:
- a bunch of reverts to handle driver_deferred_probe_check_state()
problems that were part of the 6.0-rc1 merge.
- firmware_loader bugfixes now that the code is being properly tested
and used by others
- arch_topology fix
- deferred driver probe bugfix to solve a long-suffering amba bus
problem that many people have reported.
All of these have been in linux-next for a while with no reported
problems"
* tag 'driver-core-6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
firmware_loader: Fix memory leak in firmware upload
firmware_loader: Fix use-after-free during unregister
arch_topology: Silence early cacheinfo errors when non-existent
driver core: Don't probe devices after bus_type.match() probe deferral
Revert "iommu/of: Delete usage of driver_deferred_probe_check_state()"
Revert "PM: domains: Delete usage of driver_deferred_probe_check_state()"
Revert "net: mdio: Delete usage of driver_deferred_probe_check_state()"
Revert "driver core: Delete driver_deferred_probe_check_state()"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/Thunderbolt driver fixes from Greg KH:
"Here are a lot of small USB and Thunderbolt driver fixes for 6.0-rc4
for reported problems. Included in here are:
- new usb-serial driver ids
- dwc3 driver bugfixes for reported problems with 6.0-rc1
- new device quirks, and reverts of some quirks that were incorrect
- gadget driver bugfixes for reported problems
- USB host controller bugfixes (xhci and others)
- other small USB fixes, details in the shortlog
- small thunderbolt driver fixes
All of these have been in linux-next with no reported issues"
* tag 'usb-6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (51 commits)
Revert "usb: gadget: udc-xilinx: replace memcpy with memcpy_toio"
usb: storage: Add ASUS <0x0b05:0x1932> to IGNORE_UAS
USB: serial: ch341: fix disabled rx timer on older devices
USB: serial: ch341: fix lost character on LCR updates
USB: serial: cp210x: add Decagon UCA device id
Revert "usb: add quirks for Lenovo OneLink+ Dock"
usb: cdns3: fix issue with rearming ISO OUT endpoint
usb: cdns3: fix incorrect handling TRB_SMM flag for ISOC transfer
usb: gadget: mass_storage: Fix cdrom data transfers on MAC-OS
media: mceusb: Use new usb_control_msg_*() routines
USB: core: Prevent nested device-reset calls
USB: gadget: Fix obscure lockdep violation for udc_mutex
usb: dwc2: fix wrong order of phy_power_on and phy_init
usb: gadget: udc-xilinx: replace memcpy with memcpy_toio
usb: typec: Remove retimers properly
usb: dwc3: disable USB core PHY management
usb: add quirks for Lenovo OneLink+ Dock
USB: serial: option: add support for Cinterion MV32-WA/WB RmNet mode
USB: serial: ftdi_sio: add Omron CS1W-CIF31 device id
USB: serial: option: add Quectel EM060K modem
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
"Various small fixes and hardware-id additions"
* tag 'platform-drivers-x86-v6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: p2sb: Fix UAF when caller uses resource name
platform/x86: asus-wmi: Increase FAN_CURVE_BUF_LEN to 32
platform/mellanox: Remove redundant 'NULL' check
platform/mellanox: Remove unnecessary code
platform/mellanox: mlxreg-lc: Fix locking issue
platform/mellanox: mlxreg-lc: Fix coverity warning
platform/x86: acer-wmi: Acer Aspire One AOD270/Packard Bell Dot keymap fixes
platform/x86: thinkpad_acpi: Explicitly set to balanced mode on startup
platform/x86: asus-wmi: Fix the name of the mic-mute LED classdev
platform/surface: aggregator_registry: Add HID devices for sensors and UCSI client to SP8
platform/surface: aggregator_registry: Rename HID device nodes based on new findings
platform/surface: aggregator_registry: Rename HID device nodes based on their function
platform/surface: aggregator_registry: Add support for Surface Laptop Go 2
platform/x86: x86-android-tablets: Fix broken touchscreen on Chuwi Hi8 with Windows BIOS
platform/x86: pmc_atom: Fix SLP_TYPx bitfield mask
|
|
Commit a657182a5c51 ("bpf: Don't use tnum_range on array range checking
for poke descriptors") has shown that using tnum_range() as argument to
tnum_in() can lead to misleading code that looks like tight bound check
when in fact the actual allowed range is much wider.
Document such behavior to warn against its usage in general, and suggest
some scenario where result can be trusted.
Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/984b37f9fdf7ac36831d2137415a4a915744c1b6.1661462653.git.daniel@iogearbox.net
Link: https://www.openwall.com/lists/oss-security/2022/08/26/1
Link: https://lore.kernel.org/bpf/20220831031907.16133-3-shung-hsi.yu@suse.com
Link: https://lore.kernel.org/bpf/20220831031907.16133-2-shung-hsi.yu@suse.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
David Howells says:
====================
rxrpc fixes
Here are some fixes for AF_RXRPC:
(1) Fix the handling of ICMP/ICMP6 packets. This is a problem due to
rxrpc being switched to acting as a UDP tunnel, thereby allowing it to
steal the packets before they go through the UDP Rx queue. UDP
tunnels can't get ICMP/ICMP6 packets, however. This patch adds an
additional encap hook so that they can.
(2) Fix the encryption routines in rxkad to handle packets that have more
than three parts correctly. The problem is that ->nr_frags doesn't
count the initial fragment, so the sglist ends up too short.
(3) Fix a problem with destruction of the local endpoint potentially
getting repeated.
(4) Fix the calculation of the time at which to resend.
jiffies_to_usecs() gives microseconds, not nanoseconds.
(5) Fix AFS to work out when callback promises and locks expire based on
the time an op was issued rather than the time the first reply packet
arrives. We don't know how long the server took between calculating
the expiry interval and transmitting the reply.
(6) Given (5), rxrpc_get_reply_time() is no longer used, so remove it.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
All callers are now gone.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We got a recent syzbot report [1] showing a possible misuse
of pfmemalloc page status in TCP zerocopy paths.
Indeed, for pages coming from user space or other layers,
using page_is_pfmemalloc() is moot, and possibly could give
false positives.
There has been attempts to make page_is_pfmemalloc() more robust,
but not using it in the first place in this context is probably better,
removing cpu cycles.
Note to stable teams :
You need to backport 84ce071e38a6 ("net: introduce
__skb_fill_page_desc_noacc") as a prereq.
Race is more probable after commit c07aea3ef4d4
("mm: add a signature in struct page") because page_is_pfmemalloc()
is now using low order bit from page->lru.next, which can change
more often than page->index.
Low order bit should never be set for lru.next (when used as an anchor
in LRU list), so KCSAN report is mostly a false positive.
Backporting to older kernel versions seems not necessary.
[1]
BUG: KCSAN: data-race in lru_add_fn / tcp_build_frag
write to 0xffffea0004a1d2c8 of 8 bytes by task 18600 on cpu 0:
__list_add include/linux/list.h:73 [inline]
list_add include/linux/list.h:88 [inline]
lruvec_add_folio include/linux/mm_inline.h:105 [inline]
lru_add_fn+0x440/0x520 mm/swap.c:228
folio_batch_move_lru+0x1e1/0x2a0 mm/swap.c:246
folio_batch_add_and_move mm/swap.c:263 [inline]
folio_add_lru+0xf1/0x140 mm/swap.c:490
filemap_add_folio+0xf8/0x150 mm/filemap.c:948
__filemap_get_folio+0x510/0x6d0 mm/filemap.c:1981
pagecache_get_page+0x26/0x190 mm/folio-compat.c:104
grab_cache_page_write_begin+0x2a/0x30 mm/folio-compat.c:116
ext4_da_write_begin+0x2dd/0x5f0 fs/ext4/inode.c:2988
generic_perform_write+0x1d4/0x3f0 mm/filemap.c:3738
ext4_buffered_write_iter+0x235/0x3e0 fs/ext4/file.c:270
ext4_file_write_iter+0x2e3/0x1210
call_write_iter include/linux/fs.h:2187 [inline]
new_sync_write fs/read_write.c:491 [inline]
vfs_write+0x468/0x760 fs/read_write.c:578
ksys_write+0xe8/0x1a0 fs/read_write.c:631
__do_sys_write fs/read_write.c:643 [inline]
__se_sys_write fs/read_write.c:640 [inline]
__x64_sys_write+0x3e/0x50 fs/read_write.c:640
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
read to 0xffffea0004a1d2c8 of 8 bytes by task 18611 on cpu 1:
page_is_pfmemalloc include/linux/mm.h:1740 [inline]
__skb_fill_page_desc include/linux/skbuff.h:2422 [inline]
skb_fill_page_desc include/linux/skbuff.h:2443 [inline]
tcp_build_frag+0x613/0xb20 net/ipv4/tcp.c:1018
do_tcp_sendpages+0x3e8/0xaf0 net/ipv4/tcp.c:1075
tcp_sendpage_locked net/ipv4/tcp.c:1140 [inline]
tcp_sendpage+0x89/0xb0 net/ipv4/tcp.c:1150
inet_sendpage+0x7f/0xc0 net/ipv4/af_inet.c:833
kernel_sendpage+0x184/0x300 net/socket.c:3561
sock_sendpage+0x5a/0x70 net/socket.c:1054
pipe_to_sendpage+0x128/0x160 fs/splice.c:361
splice_from_pipe_feed fs/splice.c:415 [inline]
__splice_from_pipe+0x222/0x4d0 fs/splice.c:559
splice_from_pipe fs/splice.c:594 [inline]
generic_splice_sendpage+0x89/0xc0 fs/splice.c:743
do_splice_from fs/splice.c:764 [inline]
direct_splice_actor+0x80/0xa0 fs/splice.c:931
splice_direct_to_actor+0x305/0x620 fs/splice.c:886
do_splice_direct+0xfb/0x180 fs/splice.c:974
do_sendfile+0x3bf/0x910 fs/read_write.c:1249
__do_sys_sendfile64 fs/read_write.c:1317 [inline]
__se_sys_sendfile64 fs/read_write.c:1303 [inline]
__x64_sys_sendfile64+0x10c/0x150 fs/read_write.c:1303
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
value changed: 0x0000000000000000 -> 0xffffea0004a1d288
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 18611 Comm: syz-executor.4 Not tainted 6.0.0-rc2-syzkaller-00248-ge022620b5d05-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/22/2022
Fixes: c07aea3ef4d4 ("mm: add a signature in struct page")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add some documentation for netdev_tx_sent_queue() and
netdev_tx_completed_queue()
Stating that netdev_tx_completed_queue() must be called once
per TX completion round is apparently not obvious for everybody.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
tools/testing/selftests/net/.gitignore
sort the net-next version and use it
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Because rxrpc pretends to be a tunnel on top of a UDP/UDP6 socket, allowing
it to siphon off UDP packets early in the handling of received UDP packets
thereby avoiding the packet going through the UDP receive queue, it doesn't
get ICMP packets through the UDP ->sk_error_report() callback. In fact, it
doesn't appear that there's any usable option for getting hold of ICMP
packets.
Fix this by adding a new UDP encap hook to distribute error messages for
UDP tunnels. If the hook is set, then the tunnel driver will be able to
see ICMP packets. The hook provides the offset into the packet of the UDP
header of the original packet that caused the notification.
An alternative would be to call the ->error_handler() hook - but that
requires that the skbuff be cloned (as ip_icmp_error() or ipv6_cmp_error()
do, though isn't really necessary or desirable in rxrpc's case is we want
to parse them there and then, not queue them).
Changes
=======
ver #3)
- Fixed an uninitialised variable.
ver #2)
- Fixed some missing CONFIG_AF_RXRPC_IPV6 conditionals.
Fixes: 5271953cad31 ("rxrpc: Use the UDP encap_rcv hook")
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
anon_vma->degree tracks the combined number of child anon_vmas and VMAs
that use the anon_vma as their ->anon_vma.
anon_vma_clone() then assumes that for any anon_vma attached to
src->anon_vma_chain other than src->anon_vma, it is impossible for it to
be a leaf node of the VMA tree, meaning that for such VMAs ->degree is
elevated by 1 because of a child anon_vma, meaning that if ->degree
equals 1 there are no VMAs that use the anon_vma as their ->anon_vma.
This assumption is wrong because the ->degree optimization leads to leaf
nodes being abandoned on anon_vma_clone() - an existing anon_vma is
reused and no new parent-child relationship is created. So it is
possible to reuse an anon_vma for one VMA while it is still tied to
another VMA.
This is an issue because is_mergeable_anon_vma() and its callers assume
that if two VMAs have the same ->anon_vma, the list of anon_vmas
attached to the VMAs is guaranteed to be the same. When this assumption
is violated, vma_merge() can merge pages into a VMA that is not attached
to the corresponding anon_vma, leading to dangling page->mapping
pointers that will be dereferenced during rmap walks.
Fix it by separately tracking the number of child anon_vmas and the
number of VMAs using the anon_vma as their ->anon_vma.
Fixes: 7a3ef208e662 ("mm: prevent endless growth of anon_vma hierarchy")
Cc: stable@kernel.org
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull fscache/cachefiles fixes from David Howells:
- Fix kdoc on fscache_use/unuse_cookie().
- Fix the error returned by cachefiles_ondemand_copen() from an upcall
result.
- Fix the distribution of requests in on-demand mode in cachefiles to
be fairer by cycling through them rather than picking the one with
the lowest ID each time (IDs being reused).
* tag 'fscache-fixes-20220831' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
cachefiles: make on-demand request distribution fairer
cachefiles: fix error return code in cachefiles_ondemand_copen()
fscache: fix misdocumented parameter
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull LSM support for IORING_OP_URING_CMD from Paul Moore:
"Add SELinux and Smack controls to the io_uring IORING_OP_URING_CMD.
These are necessary as without them the IORING_OP_URING_CMD remains
outside the purview of the LSMs (Luis' LSM patch, Casey's Smack patch,
and my SELinux patch). They have been discussed at length with the
io_uring folks, and Jens has given his thumbs-up on the relevant
patches (see the commit descriptions).
There is one patch that is not strictly necessary, but it makes
testing much easier and is very trivial: the /dev/null
IORING_OP_URING_CMD patch."
* tag 'lsm-pr-20220829' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
Smack: Provide read control for io_uring_cmd
/dev/null: add IORING_OP_URING_CMD support
selinux: implement the security_uring_cmd() LSM hook
lsm,io_uring: add LSM hooks for the new uring_cmd file op
|
|
This patch fixes two warnings generated by make docs. The functions
fscache_use_cookie and fscache_unuse_cookie, both have a parameter
named cookie. But they are documented with the name "object" with
unclear description. Which generates the warning when creating docs.
This commit will replace the currently misdocumented parameter names
with the correct ones while adding proper descriptions.
CC: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Khalid Masum <khalid.masum.92@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20220521142446.4746-1-khalid.masum.92@gmail.com/ # v1
Link: https://lore.kernel.org/r/20220818040738.12036-1-khalid.masum.92@gmail.com/ # v2
Link: https://lore.kernel.org/r/880d7d25753fb326ee17ac08005952112fcf9bdb.1657360984.git.mchehab@kernel.org/ # Mauro's version
|
|
Following what we do for routers already, extend this to XDomain
connections as well. This will show in sysfs whether the link is in USB4
or Thunderbolt mode.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Automatic kernel fuzzing revealed a recursive locking violation in
usb-storage:
============================================
WARNING: possible recursive locking detected
5.18.0 #3 Not tainted
--------------------------------------------
kworker/1:3/1205 is trying to acquire lock:
ffff888018638db8 (&us_interface_key[i]){+.+.}-{3:3}, at:
usb_stor_pre_reset+0x35/0x40 drivers/usb/storage/usb.c:230
but task is already holding lock:
ffff888018638db8 (&us_interface_key[i]){+.+.}-{3:3}, at:
usb_stor_pre_reset+0x35/0x40 drivers/usb/storage/usb.c:230
...
stack backtrace:
CPU: 1 PID: 1205 Comm: kworker/1:3 Not tainted 5.18.0 #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.13.0-1ubuntu1.1 04/01/2014
Workqueue: usb_hub_wq hub_event
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
print_deadlock_bug kernel/locking/lockdep.c:2988 [inline]
check_deadlock kernel/locking/lockdep.c:3031 [inline]
validate_chain kernel/locking/lockdep.c:3816 [inline]
__lock_acquire.cold+0x152/0x3ca kernel/locking/lockdep.c:5053
lock_acquire kernel/locking/lockdep.c:5665 [inline]
lock_acquire+0x1ab/0x520 kernel/locking/lockdep.c:5630
__mutex_lock_common kernel/locking/mutex.c:603 [inline]
__mutex_lock+0x14f/0x1610 kernel/locking/mutex.c:747
usb_stor_pre_reset+0x35/0x40 drivers/usb/storage/usb.c:230
usb_reset_device+0x37d/0x9a0 drivers/usb/core/hub.c:6109
r871xu_dev_remove+0x21a/0x270 drivers/staging/rtl8712/usb_intf.c:622
usb_unbind_interface+0x1bd/0x890 drivers/usb/core/driver.c:458
device_remove drivers/base/dd.c:545 [inline]
device_remove+0x11f/0x170 drivers/base/dd.c:537
__device_release_driver drivers/base/dd.c:1222 [inline]
device_release_driver_internal+0x1a7/0x2f0 drivers/base/dd.c:1248
usb_driver_release_interface+0x102/0x180 drivers/usb/core/driver.c:627
usb_forced_unbind_intf+0x4d/0xa0 drivers/usb/core/driver.c:1118
usb_reset_device+0x39b/0x9a0 drivers/usb/core/hub.c:6114
This turned out not to be an error in usb-storage but rather a nested
device reset attempt. That is, as the rtl8712 driver was being
unbound from a composite device in preparation for an unrelated USB
reset (that driver does not have pre_reset or post_reset callbacks),
its ->remove routine called usb_reset_device() -- thus nesting one
reset call within another.
Performing a reset as part of disconnect processing is a questionable
practice at best. However, the bug report points out that the USB
core does not have any protection against nested resets. Adding a
reset_in_progress flag and testing it will prevent such errors in the
future.
Link: https://lore.kernel.org/all/CAB7eexKUpvX-JNiLzhXBDWgfg2T9e9_0Tw4HQ6keN==voRbP0g@mail.gmail.com/
Cc: stable@vger.kernel.org
Reported-and-tested-by: Rondreis <linhaoguo86@gmail.com>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/YwkflDxvg0KWqyZK@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
