| Age | Commit message (Collapse) | Author | Files | Lines |
|
After commit b409a7f7176b ("ipv6: colocate inet6_cork in
inet_cork_full") we have room in ipv6_pinfo to hold daddr/final
in case they need to be populated in fl6_update_dst() calls.
This will allow stack canary removal in IPv6 tx fast paths.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260206173426.1638518-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Florian Westphal says:
====================
netfilter: updates for net-next
The following patchset contains Netfilter updates for *net-next*:
1) Fix net-next-only use-after-free bug in nf_tables rbtree set:
Expired elements cannot be released right away after unlink anymore
because there is no guarantee that the binary-search blob is going to
be updated. Spotted by syzkaller.
2) Fix esoteric bug in nf_queue with udp fraglist gro, broken since
6.11. Patch 3 adds extends the nfqueue selftest for this.
4) Use dedicated slab for flowtable entries, currently the -512 cache
is used, which is wasteful. From Qingfang Deng.
5) Recent net-next update extended existing test for ip6ip6 tunnels, add
the required /config entry. Test still passed by accident because the
previous tests network setup gets re-used, so also update the test so
it will fail in case the ip6ip6 tunnel interface cannot be added.
6) Fix 'nft get element mytable myset { 1.2.3.4 }' on big endian
platforms, this was broken since code was added in v5.1.
7) Fix nf_tables counter reset support on 32bit platforms, where counter
reset may cause huge values to appear due to wraparound.
Broken since reset feature was added in v6.11. From Anders Grahn.
8-11) update nf_tables rbtree set type to detect partial
operlaps. This will eventually speed up nftables userspace: at this
time userspace does a netlink dump of the set content which slows down
incremental updates on interval sets. From Pablo Neira Ayuso.
* tag 'nf-next-26-02-06' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: nft_set_rbtree: validate open interval overlap
netfilter: nft_set_rbtree: validate element belonging to interval
netfilter: nft_set_rbtree: check for partial overlaps in anonymous sets
netfilter: nft_set_rbtree: fix bogus EEXIST with NLM_F_CREATE with null interval
netfilter: nft_counter: fix reset of counters on 32bit archs
netfilter: nft_set_hash: fix get operation on big endian
selftests: netfilter: add IPV6_TUNNEL to config
netfilter: flowtable: dedicated slab for flow entry
selftests: netfilter: nft_queue.sh: add udp fraglist gro test case
netfilter: nfnetlink_queue: do shared-unconfirmed check before segmentation
netfilter: nft_set_rbtree: don't gc elements on insert
====================
Link: https://patch.msgid.link/20260206153048.17570-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Extend struct printk_info to include the task name, pid, and CPU
number where printk messages originate. This information is captured
at vprintk_store() time and propagated through printk_message to
nbcon_write_context, making it available to nbcon console drivers.
This is useful for consoles like netconsole that want to include
execution context in their output, allowing correlation of messages
with specific tasks and CPUs regardless of where the console driver
actually runs.
The feature is controlled by CONFIG_PRINTK_EXECUTION_CTX, which is
automatically selected by CONFIG_NETCONSOLE_DYNAMIC. When disabled,
the helper functions compile to no-ops with no overhead.
Suggested-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Link: https://patch.msgid.link/20260206-nbcon-v7-1-62bda69b1b41@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
BIG TCP IPv6 inserts a hop-by-hop extension header to indicate the real
IPv6 payload length when it doesn't fit into the 16-bit field in the
IPv6 header itself. While it helps tools parse the packet, it also
requires every driver that supports TSO and BIG TCP to remove this
8-byte extension header. It might not sound that bad until we try to
apply it to tunneled traffic. Currently, the drivers don't attempt to
strip HBH if skb->encapsulation = 1. Moreover, trying to do so would
require dissecting different tunnel protocols and making corresponding
adjustments on case-by-case basis, which would slow down the fastpath
(potentially also requiring adjusting checksums in outer headers).
At the same time, BIG TCP IPv4 doesn't insert any extra headers and just
calculates the payload length from skb->len, significantly simplifying
implementing BIG TCP for tunnels.
Stop inserting HBH when building BIG TCP GSO SKBs.
Signed-off-by: Alice Mikityanska <alice@isovalent.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260205133925.526371-3-alice.kernel@fastmail.im
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The next commits will transition away from using the hop-by-hop
extension header to encode packet length for BIG TCP. Add wrappers
around ip6->payload_len that return the actual value if it's non-zero,
and calculate it from skb->len if payload_len is set to zero (and a
symmetrical setter).
The new helpers are used wherever the surrounding code supports the
hop-by-hop jumbo header for BIG TCP IPv6, or the corresponding IPv4 code
uses skb_ip_totlen (e.g., in include/net/netfilter/nf_tables_ipv6.h).
No behavioral change in this commit.
Signed-off-by: Alice Mikityanska <alice@isovalent.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260205133925.526371-2-alice.kernel@fastmail.im
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
nft_counter_reset() calls u64_stats_add() with a negative value to reset
the counter. This will work on 64bit archs, hence the negative value
added will wrap as a 64bit value which then can wrap the stat counter as
well.
On 32bit archs, the added negative value will wrap as a 32bit value and
_not_ wrapping the stat counter properly. In most cases, this would just
lead to a very large 32bit value being added to the stat counter.
Fix by introducing u64_stats_sub().
Fixes: 4a1d3acd6ea8 ("netfilter: nft_counter: Use u64_stats_t for statistic.")
Signed-off-by: Anders Grahn <anders.grahn@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
Rename TAUI/TBASE to GAUI/GBASE in 1600G link mode identifier and its
usage in ethtool and link-info tables.
Reported-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com>
Signed-off-by: Yael Chemla <ychemla@nvidia.com>
Reviewed-by: Shahar Shitrit <shshitrit@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com>
Reported-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com>
Signed-off-by: Yael Chemla <ychemla@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://patch.msgid.link/20260204194324.1723534-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.19-rc9).
No adjacent changes, conflicts:
drivers/net/ethernet/spacemit/k1_emac.c
3125fc1701694 ("net: spacemit: k1-emac: fix jumbo frame support")
f66086798f91f ("net: spacemit: Remove broken flow control support")
https://lore.kernel.org/aYIysFIE9ooavWia@sirena.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from wireless and Netfilter.
Previous releases - regressions:
- eth: stmmac: fix stm32 (and potentially others) resume regression
- nf_tables: fix inverted genmask check in nft_map_catchall_activate()
- usb: r8152: fix resume reset deadlock
- fix reporting RXH_XFRM_NO_CHANGE as input_xfrm for RSS contexts
Previous releases - always broken:
- sched: cls_u32: use skb_header_pointer_careful() to avoid OOB reads
with malicious u32 rules
- eth: ice: timestamping related fixes"
* tag 'net-6.19-rc9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (38 commits)
ipv6: Fix ECMP sibling count mismatch when clearing RTF_ADDRCONF
netfilter: nf_tables: fix inverted genmask check in nft_map_catchall_activate()
net: cpsw: Execute ndo_set_rx_mode callback in a work queue
net: cpsw_new: Execute ndo_set_rx_mode callback in a work queue
gve: Correct ethtool rx_dropped calculation
gve: Fix stats report corruption on queue count change
selftest: net: add a test-case for encap segmentation after GRO
net: gro: fix outer network offset
net: add proper RCU protection to /proc/net/ptype
net: ethernet: adi: adin1110: Check return value of devm_gpiod_get_optional() in adin1110_check_spi()
wifi: iwlwifi: mvm: pause TCM on fast resume
wifi: iwlwifi: mld: cancel mlo_scan_start_wk
net: spacemit: k1-emac: fix jumbo frame support
net: enetc: Convert 16-bit register reads to 32-bit for ENETC v4
net: enetc: Convert 16-bit register writes to 32-bit for ENETC v4
net: enetc: Remove CBDR cacheability AXI settings for ENETC v4
net: enetc: Remove SI/BDR cacheability AXI settings for ENETC v4
tipc: use kfree_sensitive() for session key material
net: stmmac: fix stm32 (and potentially others) resume regression
net: rss: fix reporting RXH_XFRM_NO_CHANGE as input_xfrm for contexts
...
|
|
skb_protocol() is bloated, and forces slow stack canaries in many
fast paths.
Add vlan_get_protocol_offset_inline() which deals with the non-vlan
common cases.
__vlan_get_protocol_offset() is now out of line.
It returns a vlan_type_depth struct to avoid stack canaries in callers.
struct vlan_type_depth {
__be16 type;
u16 depth;
};
$ scripts/bloat-o-meter -t vmlinux.old vmlinux.new
add/remove: 0/2 grow/shrink: 0/22 up/down: 0/-6320 (-6320)
Function old new delta
vlan_get_protocol_dgram 61 59 -2
__pfx_skb_protocol 16 - -16
__vlan_get_protocol_offset 307 273 -34
tap_get_user 1374 1207 -167
ip_md_tunnel_xmit 1625 1452 -173
tap_sendmsg 940 753 -187
netif_skb_features 1079 866 -213
netem_enqueue 3017 2800 -217
vlan_parse_protocol 271 50 -221
tso_start 567 344 -223
fq_dequeue 1908 1685 -223
skb_network_protocol 434 205 -229
ip6_tnl_xmit 2639 2409 -230
br_dev_queue_push_xmit 474 236 -238
skb_protocol 258 - -258
packet_parse_headers 621 357 -264
__ip6_tnl_rcv 1306 1039 -267
skb_csum_hwoffload_help 515 224 -291
ip_tunnel_xmit 2635 2339 -296
sch_frag_xmit_hook 1582 1233 -349
bpf_skb_ecn_set_ce 868 457 -411
IP6_ECN_decapsulate 1297 768 -529
ip_tunnel_rcv 2121 1489 -632
ipip6_rcv 2572 1922 -650
Total: Before=24892803, After=24886483, chg -0.03%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260204053023.1622775-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add support for the REF_TRACKER infrastructure to the DPLL subsystem.
When enabled, this allows developers to track and debug reference counting
leaks or imbalances for dpll_device and dpll_pin objects. It records stack
traces for every get/put operation and exposes this information via
debugfs at:
/sys/kernel/debug/ref_tracker/dpll_device_*
/sys/kernel/debug/ref_tracker/dpll_pin_*
The following API changes are made to support this:
1. dpll_device_get() / dpll_device_put() now accept a 'dpll_tracker *'
(which is a typedef to 'struct ref_tracker *' when enabled, or an empty
struct otherwise).
2. dpll_pin_get() / dpll_pin_put() and fwnode_dpll_pin_find() similarly
accept the tracker argument.
3. Internal registration structures now hold a tracker to associate the
reference held by the registration with the specific owner.
All existing in-tree drivers (ice, mlx5, ptp_ocp, zl3073x) are updated
to pass NULL for the new tracker argument, maintaining current behavior
while enabling future debugging capabilities.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Co-developed-by: Petr Oros <poros@redhat.com>
Signed-off-by: Petr Oros <poros@redhat.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Link: https://patch.msgid.link/20260203174002.705176-8-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Allow drivers to register DPLL pins without manually specifying a pin
index.
Currently, drivers must provide a unique pin index when calling
dpll_pin_get(). This works well for hardware-mapped pins but creates
friction for drivers handling virtual pins or those without a strict
hardware indexing scheme.
Introduce DPLL_PIN_IDX_UNSPEC (U32_MAX). When a driver passes this
value as the pin index:
1. The core allocates a unique index using an IDA
2. The allocated index is mapped to a range starting above `INT_MAX`
This separation ensures that dynamically allocated indices never collide
with standard driver-provided hardware indices, which are assumed to be
within the `0` to `INT_MAX` range. The index is automatically freed when
the pin is released in dpll_pin_put().
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Link: https://patch.msgid.link/20260203174002.705176-5-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently, the DPLL subsystem reports events (creation, deletion, changes)
to userspace via Netlink. However, there is no mechanism for other kernel
components to be notified of these events directly.
Add a raw notifier chain to the DPLL core protected by dpll_lock. This
allows other kernel subsystems or drivers to register callbacks and
receive notifications when DPLL devices or pins are created, deleted,
or modified.
Define the following:
- Registration helpers: {,un}register_dpll_notifier()
- Event types: DPLL_DEVICE_CREATED, DPLL_PIN_CREATED, etc.
- Context structures: dpll_{device,pin}_notifier_info to pass relevant
data to the listeners.
The notification chain is invoked alongside the existing Netlink event
generation to ensure in-kernel listeners are kept in sync with the
subsystem state.
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Co-developed-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: Petr Oros <poros@redhat.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Link: https://patch.msgid.link/20260203174002.705176-4-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Extend the DPLL core to support associating a DPLL pin with a firmware
node. This association is required to allow other subsystems (such as
network drivers) to locate and request specific DPLL pins defined in
the Device Tree or ACPI.
* Add a .fwnode field to the struct dpll_pin
* Introduce dpll_pin_fwnode_set() helper to allow the provider driver
to associate a pin with a fwnode after the pin has been allocated
* Introduce fwnode_dpll_pin_find() helper to allow consumers to search
for a registered DPLL pin using its associated fwnode handle
* Ensure the fwnode reference is properly released in dpll_pin_put()
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Link: https://patch.msgid.link/20260203174002.705176-2-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This patch removes struct can_skb_priv which was stored at skb->head and
the can_skb_reserve() helper which was used to shift skb->head.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260201-can_skb_ext-v8-5-3635d790fe8b@hartkopp.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
To remove the private CAN bus skb headroom infrastructure 8 bytes need to
be stored in the skb. The skb extensions are a common pattern and an easy
and efficient way to hold private data travelling along with the skb. We
only need the skb_ext_add() and skb_ext_find() functions to allocate and
access CAN specific content as the skb helpers to copy/clone/free skbs
automatically take care of skb extensions and their final removal.
This patch introduces the complete CAN skb extensions infrastructure:
- add struct can_skb_ext in new file include/net/can.h
- add include/net/can.h in MAINTAINERS
- add SKB_EXT_CAN to skbuff.c and skbuff.h
- select SKB_EXTENSIONS in Kconfig when CONFIG_CAN is enabled
- check for existing CAN skb extensions in can_rcv() in af_can.c
- add CAN skb extensions allocation at every skb_alloc() location
- duplicate the skb extensions if cloning outgoing skbs (framelen/gw_hops)
- introduce can_skb_ext_add() and can_skb_ext_find() helpers
The patch also corrects an indention issue in the original code from 2018:
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202602010426.PnGrYAk3-lkp@intel.com/
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260201-can_skb_ext-v8-2-3635d790fe8b@hartkopp.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The can_skb_priv::skbcnt variable is used to identify CAN skbs in the RX
path analogue to the skb->hash.
As the skb hash is not filled in CAN skbs move the private skbcnt value to
skb->hash and set skb->sw_hash accordingly. The skb->hash is a value used
for RPS to identify skbs. Use it as intended.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260201-can_skb_ext-v8-1-3635d790fe8b@hartkopp.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently the driver has an inconsistent behaviour between modes when it
comes to oversized packets that are not dropped through the physical MTU
check in HW. This can happen for Multi Host configurations where each
port has a different MTU.
Current behavior:
1) Striding RQ in linear mode drops the packet in SW and counts it
with oversize_pkts_sw_drop.
2) Striding RQ in non-linear mode allows it like a normal packet.
3) Legacy RQ can't receive oversized packets by design:
the RX WQE uses MTU sized packet buffers.
This inconsistency is not a violation of the netdev policy [1]
but it is better to be consistent across modes.
This patch aligns (2) with (1) and (3). One exception is added for
LRO: don't drop the oversized packet if it is an LRO packet.
As now rq->hw_mtu always needs to be updated during the MTU change flow,
drop the reset avoidance optimization from mlx5e_change_mtu().
Extract the CQE LRO segments reading into a helper function as it
is used twice now.
[1] Documentation/networking/netdevices.rst#L205
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260203072130.1710255-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The dwmac databook for v3.74a states that lpi_intr_o is a sideband
signal which should be used to ungate the application clock, and this
signal is synchronous to the receive clock. The receive clock can run
at 2.5, 25 or 125MHz depending on the media speed, and can stop under
the control of the link partner. This means that the time it takes to
clear is dependent on the negotiated media speed, and thus can be 8,
40, or 400ns after reading the LPI control and status register.
It has been observed with some aggressive link partners, this clock
can stop while lpi_intr_o is still asserted, meaning that the signal
remains asserted for an indefinite period that the local system has
no direct control over.
The LPI interrupts will still be signalled through the main interrupt
path in any case, and this path is not dependent on the receive clock.
This, since we do not gate the application clock, and the chances of
adding clock gating in the future are slim due to the clocks being
ill-defined, lpi_intr_o serves no useful purpose. Remove the code which
requests the interrupt, and all associated code.
Reported-by: Ovidiu Panait <ovidiu.panait.rb@renesas.com>
Tested-by: Ovidiu Panait <ovidiu.panait.rb@renesas.com> # Renesas RZ/V2H board
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vnJbt-00000007YYN-28nm@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In include/linux/stmmac.h clk_csr_i is spelled as clk_scr_i by mistake,
so correct the typo.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Reviewed-by: Yanteng Si <siyanteng@cqsoftware.com.cn>
Link: https://patch.msgid.link/20260203062658.2156653-1-chenhuacai@loongson.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Some more changes, including pulls from drivers:
- ath drivers: small features/cleanups
- rtw drivers: mostly refactoring for rtw89 RTL8922DE support
- mac80211: use hrtimers for CAC to avoid too long delays
- cfg80211/mac80211: some initial UHR (Wi-Fi 8) support
* tag 'wireless-next-2026-02-04' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (59 commits)
wifi: brcmsmac: phy: Remove unreachable error handling code
wifi: mac80211: Add eMLSR/eMLMR action frame parsing support
wifi: mac80211: add initial UHR support
wifi: cfg80211: add initial UHR support
wifi: ieee80211: add some initial UHR definitions
wifi: mac80211: use wiphy_hrtimer_work for CAC timeout
wifi: mac80211: correct ieee80211-{s1g/eht}.h include guard comments
wifi: ath12k: clear stale link mapping of ahvif->links_map
wifi: ath12k: Add support TX hardware queue stats
wifi: ath12k: Add support RX PDEV stats
wifi: ath12k: Fix index decrement when array_len is zero
wifi: ath12k: support OBSS PD configuration for AP mode
wifi: ath12k: add WMI support for spatial reuse parameter configuration
dt-bindings: net: wireless: ath11k-pci: deprecate 'firmware-name' property
wifi: ath11k: add usecase firmware handling based on device compatible
wifi: ath10k: sdio: add missing lock protection in ath10k_sdio_fw_crashed_dump()
wifi: ath10k: fix lock protection in ath10k_wmi_event_peer_sta_ps_state_chg()
wifi: ath10k: snoc: support powering on the device via pwrseq
wifi: rtw89: pci: warn if SPS OCP happens for RTL8922DE
wifi: rtw89: pci: restore LDO setting after device resume
...
====================
Link: https://patch.msgid.link/20260204121143.181112-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/devsec/tsm
Pull TSM (TEE security Manager) fixes from Dan Williams:
"The largest change is reverting part of an ABI that never shipped in a
released kernel (Documentation/ABI/testing/sysfs-class-tsm). The fix /
replacement for that is too large to squeeze in at this late date.
The rest is a collection of small fixups:
- Fix multiple streams per host bridge for SEV-TIO
- Drop the TSM ABI for reporting IDE streams (to be replaced)
- Fix virtual function enumeration
- Fix reserved stream ID initialization
- Fix unused variable compiler warning"
* tag 'tsm-fixes-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/devsec/tsm:
crypto/ccp: Allow multiple streams on the same root bridge
crypto/ccp: Use PCI bridge defaults for IDE
coco/tsm: Remove unused variable tsm_rwsem
PCI/IDE: Fix reading a wrong reg for unused sel stream initialization
PCI/IDE: Fix off by one error calculating VF RID range
Revert "PCI/TSM: Report active IDE streams"
|
|
Many USB network drivers use identical code to pass ioctl
requests on to the MII layer. Reduce code duplication by
refactoring this code into a helper function.
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> (v1)
Reviewed-by: Andrew Lunn <andrew@lunn.ch> (v3)
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260203013517.26170-1-enelsonmoore@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Detect spurious retransmission of a previously sent ACK carrying the
AccECN option after the second retransmission. Since this might be caused
by the middlebox dropping ACK with options it does not recognize, disable
the sending of the AccECN option in all subsequent ACKs. This patch
follows Section 3.2.3.2.2 of AccECN spec (RFC9768), and a new field
(accecn_opt_sent_w_dsack) is added to indicate that an AccECN option was
sent with duplicate SACK info.
Also, a new AccECN option sending mode is added to tcp_ecn_option sysctl:
(TCP_ECN_OPTION_PERSIST), which ignores the AccECN fallback policy and
persistently sends AccECN option once it fits into TCP option space.
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260131222515.8485-13-chia-yu.chang@nokia-bell-labs.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add newly acked pkts EWMA. When ACK thinning occurs, select
between safer and unsafe cep delta in AccECN processing based
on it. If the packets ACKed per ACK tends to be large, don't
conservatively assume ACE field overflow.
This patch uses the existing 2-byte holes in the rx group for new
u16 variables withtout creating more holes. Below are the pahole
outcomes before and after this patch:
[BEFORE THIS PATCH]
struct tcp_sock {
[...]
u32 delivered_ecn_bytes[3]; /* 2744 12 */
/* XXX 4 bytes hole, try to pack */
[...]
__cacheline_group_end__tcp_sock_write_rx[0]; /* 2816 0 */
[...]
/* size: 3264, cachelines: 51, members: 177 */
}
[AFTER THIS PATCH]
struct tcp_sock {
[...]
u32 delivered_ecn_bytes[3]; /* 2744 12 */
u16 pkts_acked_ewma; /* 2756 2 */
/* XXX 2 bytes hole, try to pack */
[...]
__cacheline_group_end__tcp_sock_write_rx[0]; /* 2816 0 */
[...]
/* size: 3264, cachelines: 51, members: 178 */
}
Signed-off-by: Ilpo Järvinen <ij@kernel.org>
Co-developed-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260131222515.8485-2-chia-yu.chang@nokia-bell-labs.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Last user dsa_loop has been migrated away from modalias-based matching,
so we can remove this feature now. It was the only user of MDIO_NAME_SIZE,
so remove also this constant.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/ce1c6df0-4785-4b28-8322-32dc6bceea18@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
All inet6_cork users also use one inet_cork_full.
Reduce number of parameters and increase data locality.
This saves ~275 bytes of code on x86_64.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260130210303.3888261-9-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add the following check, to detect bugs sooner for CONFIG_DEBUG_NET=y
builds.
DEBUG_NET_WARN_ON_ONCE(skb->data < skb->head);
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260130160253.2936789-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce support in AP mode for parsing of the Operating Mode Notification
frame sent by the client to enable/disable MLO eMLSR or eMLMR if supported
by both the AP and the client.
Add drv_set_eml_op_mode mac80211 callback in order to configure underlay
driver with eMLSR/eMLMR info.
Tested-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260129-mac80211-emlsr-v4-1-14bdadf57380@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This is based on Draft P802.11bn_D1.2, but that's still very
incomplete, so don't handle a number of things and make some
local decisions such as using 40 bits for MAC capabilities
and 8 bits for PHY capabilities.
Link: https://patch.msgid.link/20260130164259.b28c9456ff94.I5b11fb0345a933bf497fd802aecc72932d58dd68@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
After the split of ieee80211.h some include guard comments weren't
updated, update them to their new file names.
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20260130005319.70019-1-lachlan.hodges@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf events fix from Ingo Molnar:
"Fix a race in the user-callchains code"
* tag 'perf-urgent-2026-02-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: sched: Fix perf crash with new is_user_task() helper
|
|
Many WWAN modems come with embedded GNSS receiver inside and have a
dedicated port to output geopositioning data. On the one hand, the
GNSS receiver has little in common with WWAN modem and just shares a
host interface and should be exported using the GNSS subsystem. On the
other hand, GNSS receiver is not automatically activated and needs a
generic WWAN control port (AT, MBIM, etc.) to be turned on. And a user
space software needs extra information to find the control port.
Introduce the new type of WWAN port - NMEA. When driver asks to register
a NMEA port, the core allocates common parent WWAN device as usual, but
exports the NMEA port via the GNSS subsystem and acts as a proxy between
the device driver and the GNSS subsystem.
From the WWAN device driver perspective, a NMEA port is registered as a
regular WWAN port without any difference. And the driver interacts only
with the WWAN core. From the user space perspective, the NMEA port is a
GNSS device which parent can be used to enumerate and select the proper
control port for the GNSS receiver management.
CC: Slark Xiao <slark_xiao@163.com>
CC: Muhammad Nuzaihan <zaihan@unrealasia.net>
CC: Qiang Yu <quic_qianyu@quicinc.com>
CC: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
CC: Johan Hovold <johan@kernel.org>
Suggested-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Reviewed-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Link: https://patch.msgid.link/20260126062158.308598-6-slark_xiao@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In order to do a user space stacktrace the current task needs to be a user
task that has executed in user space. It use to be possible to test if a
task is a user task or not by simply checking the task_struct mm field. If
it was non NULL, it was a user task and if not it was a kernel task.
But things have changed over time, and some kernel tasks now have their
own mm field.
An idea was made to instead test PF_KTHREAD and two functions were used to
wrap this check in case it became more complex to test if a task was a
user task or not[1]. But this was rejected and the C code simply checked
the PF_KTHREAD directly.
It was later found that not all kernel threads set PF_KTHREAD. The io-uring
helpers instead set PF_USER_WORKER and this needed to be added as well.
But checking the flags is still not enough. There's a very small window
when a task exits that it frees its mm field and it is set back to NULL.
If perf were to trigger at this moment, the flags test would say its a
user space task but when perf would read the mm field it would crash with
at NULL pointer dereference.
Now there are flags that can be used to test if a task is exiting, but
they are set in areas that perf may still want to profile the user space
task (to see where it exited). The only real test is to check both the
flags and the mm field.
Instead of making this modification in every location, create a new
is_user_task() helper function that does all the tests needed to know if
it is safe to read the user space memory or not.
[1] https://lore.kernel.org/all/20250425204120.639530125@goodmis.org/
Fixes: 90942f9fac05 ("perf: Use current->flags & PF_KTHREAD|PF_USER_WORKER instead of current->mm == NULL")
Closes: https://lore.kernel.org/all/0d877e6f-41a7-4724-875d-0b0a27b8a545@roeck-us.net/
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260129102821.46484722@gandalf.local.home
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux
Pull dma-mapping fixes from Marek Szyprowski:
- important fix for ARM 32-bit based systems using cma= kernel
parameter (Oreoluwa Babatunde)
- a fix for the corner case of the DMA atomic pool based allocations
(Sai Sree Kartheek Adivi)
* tag 'dma-mapping-6.19-2026-01-30' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux:
dma/pool: distinguish between missing and exhausted atomic pools
of: reserved_mem: Allow reserved_mem framework detect "cma=" kernel param
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Another fairly large set of changes, notably:
- cfg80211/mac80211
- most of EPPKE/802.1X over auth frames support
- additional FTM capabilities
- split up drop reasons better, removing generic RX_DROP
- NAN cleanups/fixes
- ath11k:
- support for Channel Frequency Response measurement
- ath12k:
- support for the QCC2072 chipset
- iwlwifi:
- partial NAN support
- UNII-9 support
- some UHR/802.11bn FW APIs
- remove most of MLO/EHT from iwlmvm
(such devices use iwlmld)
- rtw89:
- preparations for RTL8922DE support
* tag 'wireless-next-2026-01-29' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (184 commits)
wifi: iwlegacy: add missing mutex protection in il4965_store_tx_power()
wifi: iwlegacy: add missing mutex protection in il3945_store_measurement()
wifi: mac80211: use u64_stats_t with u64_stats_sync properly
wifi: p54: Fix memory leak in p54_beacon_update()
wifi: cfg80211: treat deprecated INDOOR_SP_AP_OLD control value as LPI mode
wifi: rtw88: sdio: Migrate to use sdio specific shutdown function
wifi: rsi: sdio: Migrate to use sdio specific shutdown function
sdio: Provide a bustype shutdown function
wifi: nl80211/cfg80211: support operating as RSTA in PMSR FTM request
wifi: nl80211/cfg80211: add negotiated burst period to FTM result
wifi: nl80211/cfg80211: clarify periodic FTM parameters for non-EDCA based ranging
wifi: nl80211/cfg80211: add new FTM capabilities
wifi: iwlwifi: rename struct iwl_mcc_allowed_ap_type_cmd::offset_map
wifi: iwlwifi: mvm: Remove link_id from time_events
wifi: iwlwifi: mld: change cluster_id type to u8 array
wifi: iwlwifi: support V13 of iwl_lari_config_change_cmd
wifi: iwlwifi: split bios_value_u32 to separate the header
wifi: iwlwifi: uefi: cache the DSM functions
wifi: iwlwifi: acpi: cache the DSM functions
wifi: iwlwifi: mvm: Cleanup MLO code
...
====================
Link: https://patch.msgid.link/20260129110136.176980-39-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This variant of skb_header_pointer() should be used in contexts
where @offset argument is user-controlled and could be negative.
Negative offsets are supported, as long as the zone starts
between skb->head and skb->data.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260128141539.3404400-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.19-rc8).
No adjacent changes, conflicts:
drivers/net/ethernet/spacemit/k1_emac.c
2c84959167d64 ("net: spacemit: Check for netif_carrier_ok() in emac_stats_update()")
f66086798f91f ("net: spacemit: Remove broken flow control support")
https://lore.kernel.org/aXjAqZA3iEWD_DGM@sirena.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"16 hotfixes. 9 are cc:stable, 12 are for MM.
There's a patch series from Pratyush Yadav which fixes a few things in
the new-in-6.19 LUO memfd code.
Plus the usual shower of singletons - please see the changelogs for
details"
* tag 'mm-hotfixes-stable-2026-01-29-09-41' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
vmcoreinfo: make hwerr_data visible for debugging
mm/zone_device: reinitialize large zone device private folios
mm/mm_init: don't cond_resched() in deferred_init_memmap_chunk() if called from deferred_grow_zone()
mm/kfence: randomize the freelist on initialization
kho: kho_preserve_vmalloc(): don't return 0 when ENOMEM
kho: init alloc tags when restoring pages from reserved memory
mm: memfd_luo: restore and free memfd_luo_ser on failure
mm: memfd_luo: use memfd_alloc_file() instead of shmem_file_setup()
memfd: export alloc_file()
flex_proportions: make fprop_new_period() hardirq safe
mailmap: add entry for Viacheslav Bocharov
mm/memory-failure: teach kill_accessing_process to accept hugetlb tail page pfn
mm/memory-failure: fix missing ->mf_stats count in hugetlb poison
mm, swap: restore swap_space attr aviod kernel panic
mm/kasan: fix KASAN poisoning in vrealloc()
mm/shmem, swap: fix race of truncate and swap entry split
|
|
When initializing the default cma region, the "cma=" kernel parameter
takes priority over a DT defined linux,cma-default region. Hence, give
the reserved_mem framework the ability to detect this so that the DT
defined cma region can skip initialization accordingly.
Signed-off-by: Oreoluwa Babatunde <oreoluwa.babatunde@oss.qualcomm.com>
Tested-by: Joy Zou <joy.zou@nxp.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Fixes: 8a6e02d0c00e ("of: reserved_mem: Restructure how the reserved memory regions are processed")
Fixes: 2c223f7239f3 ("of: reserved_mem: Restructure call site for dma_contiguous_early_fixup()")
Link: https://lore.kernel.org/r/20251210002027.1171519-1-oreoluwa.babatunde@oss.qualcomm.com
[mszyprow: rebased onto v6.19-rc1, added fixes tags, added a stub for
cma_skip_dt_default_reserved_mem() if no CONFIG_DMA_CMA is set]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
|
|
As the stmmac_priv struct is passed to the fix_soc_reset() method which
has the ioaddr, there is no need to pass ioaddr separately. Pass just
the stmmac_priv struct. Fix up the glues that use it.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1vkLmM-00000005vE1-0nop@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To prepare sdio drivers to migrate away from struct device_driver::shutdown
(and then eventually remove that callback) create a serdev driver shutdown
callback and migration code to keep the existing behaviour. Note this
introduces a warning for each driver that isn't converted yet to that
callback at register time.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/397f45c2818f6632151f92b70e547262f373c3b6.1768232321.git.u.kleine-koenig@baylibre.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add netns support to loopback and vhost. Keep netns disabled for
virtio-vsock, but add necessary changes to comply with common API
updates.
This is the patch in the series when vhost-vsock namespaces actually
come online.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260121-vsock-vmtest-v16-3-2859a7512097@meta.com
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add netns logic to vsock core. Additionally, modify transport hook
prototypes to be used by later transport-specific patches (e.g.,
*_seqpacket_allow()).
Namespaces are supported primarily by changing socket lookup functions
(e.g., vsock_find_connected_socket()) to take into account the socket
namespace and the namespace mode before considering a candidate socket a
"match".
This patch also introduces the sysctl /proc/sys/net/vsock/ns_mode to
report the mode and /proc/sys/net/vsock/child_ns_mode to set the mode
for new namespaces.
Add netns functionality (initialization, passing to transports, procfs,
etc...) to the af_vsock socket layer. Later patches that add netns
support to transports depend on this patch.
This patch changes the allocation of random ports for connectible vsocks
in order to avoid leaking the random port range starting point to other
namespaces.
dgram_allow(), stream_allow(), and seqpacket_allow() callbacks are
modified to take a vsk in order to perform logic on namespace modes. In
future patches, the net will also be used for socket
lookups in these functions.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260121-vsock-vmtest-v16-1-2859a7512097@meta.com
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Reinitialize metadata for large zone device private folios in
zone_device_page_init prior to creating a higher-order zone device private
folio. This step is necessary when the folio's order changes dynamically
between zone_device_page_init calls to avoid building a corrupt folio. As
part of the metadata reinitialization, the dev_pagemap must be passed in
from the caller because the pgmap stored in the folio page may have been
overwritten with a compound head.
Without this fix, individual pages could have invalid pgmap fields and
flags (with PG_locked being notably problematic) due to prior different
order allocations, which can, and will, result in kernel crashes.
Link: https://lkml.kernel.org/r/20260116111325.1736137-2-francois.dugast@intel.com
Fixes: d245f9b4ab80 ("mm/zone_device: support large zone device private folios")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Acked-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Balbir Singh <balbirs@nvidia.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Christophe Leroy (CS GROUP)" <chleroy@kernel.org>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: David Hildenbrand <david@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm: memfd_luo hotfixes".
This series contains a couple of fixes for memfd preservation using LUO.
This patch (of 3):
The Live Update Orchestrator's (LUO) memfd preservation works by
preserving all the folios of a memfd, re-creating an empty memfd on the
next boot, and then inserting back the preserved folios.
Currently it creates the file by directly calling shmem_file_setup().
This leaves out other work done by alloc_file() like setting up the file
mode, flags, or calling the security hooks.
Export alloc_file() to let memfd_luo use it. Rename it to
memfd_alloc_file() since it is no longer private and thus needs a
subsystem prefix.
Link: https://lkml.kernel.org/r/20260122151842.4069702-1-pratyush@kernel.org
Link: https://lkml.kernel.org/r/20260122151842.4069702-2-pratyush@kernel.org
Signed-off-by: Pratyush Yadav (Google) <pratyush@kernel.org>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
A KASAN warning can be triggered when vrealloc() changes the requested
size to a value that is not aligned to KASAN_GRANULE_SIZE.
------------[ cut here ]------------
WARNING: CPU: 2 PID: 1 at mm/kasan/shadow.c:174 kasan_unpoison+0x40/0x48
...
pc : kasan_unpoison+0x40/0x48
lr : __kasan_unpoison_vmalloc+0x40/0x68
Call trace:
kasan_unpoison+0x40/0x48 (P)
vrealloc_node_align_noprof+0x200/0x320
bpf_patch_insn_data+0x90/0x2f0
convert_ctx_accesses+0x8c0/0x1158
bpf_check+0x1488/0x1900
bpf_prog_load+0xd20/0x1258
__sys_bpf+0x96c/0xdf0
__arm64_sys_bpf+0x50/0xa0
invoke_syscall+0x90/0x160
Introduce a dedicated kasan_vrealloc() helper that centralizes KASAN
handling for vmalloc reallocations. The helper accounts for KASAN granule
alignment when growing or shrinking an allocation and ensures that partial
granules are handled correctly.
Use this helper from vrealloc_node_align_noprof() to fix poisoning logic.
[ryabinin.a.a@gmail.com: move kasan_enabled() check, fix build]
Link: https://lkml.kernel.org/r/20260119144509.32767-1-ryabinin.a.a@gmail.com
Link: https://lkml.kernel.org/r/20260113191516.31015-1-ryabinin.a.a@gmail.com
Fixes: d699440f58ce ("mm: fix vrealloc()'s KASAN poisoning logic")
Signed-off-by: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Reported-by: Maciej Żenczykowski <maze@google.com>
Reported-by: <joonki.min@samsung-slsi.corp-partner.google.com>
Closes: https://lkml.kernel.org/r/CANP3RGeuRW53vukDy7WDO3FiVgu34-xVJYkfpm08oLO3odYFrA@mail.gmail.com
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Tested-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Uladzislau Rezki <urezki@gmail.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Fix the the buggy conversion of fuse_reverse_inval_entry() introduced
during the creation rework
- Disallow nfs delegation requests for directories by setting
simple_nosetlease()
- Require an opt-in for getting readdir flag bits outside of S_DT_MASK
set in d_type
- Fix scheduling delayed writeback work by only scheduling when the
dirty time expiry interval is non-zero and cancel the delayed work if
the interval is set to zero
- Use rounded_jiffies_interval for dirty time work
- Check the return value of sb_set_blocksize() for romfs
- Wait for batched folios to be stable in __iomap_get_folio()
- Use private naming for fuse hash size
- Fix the stale dentry cleanup to prevent a race that causes a UAF
* tag 'vfs-6.19-rc8.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
vfs: document d_dispose_if_unused()
fuse: shrink once after all buckets have been scanned
fuse: clean up fuse_dentry_tree_work()
fuse: add need_resched() before unlocking bucket
fuse: make sure dentry is evicted if stale
fuse: fix race when disposing stale dentries
fuse: use private naming for fuse hash size
writeback: use round_jiffies_relative for dirtytime_work
iomap: wait for batched folios to be stable in __iomap_get_folio
romfs: check sb_set_blocksize() return value
docs: clarify that dirtytime_expire_seconds=0 disables writeback
writeback: fix 100% CPU usage when dirtytime_expire_interval is 0
readdir: require opt-in for d_type flags
vboxsf: don't allow delegations to be set on directories
ceph: don't allow delegations to be set on directories
gfs2: don't allow delegations to be set on directories
9p: don't allow delegations to be set on directories
smb/client: properly disallow delegations on directories
nfs: properly disallow delegation requests on directories
fuse: fix conversion of fuse_reverse_inval_entry() to start_removing()
|
|
idev->mr_maxdelay is read and written locklessly,
add READ_ONCE()/WRITE_ONCE() annotations.
While we are at it, make this field an u32.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20260122172247.2429403-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
NETDEV_RSS_KEY_LEN has been set to 52 bytes in 2014, until now.
Jakub suggested we bump the size to 128 bytes or more.
Some drivers (like idpf) were already working around the core limit.
Since this change might cause some issues in admin scripts,
bump it directly to 256 in one go.
tjbp26:~# cat /proc/sys/net/core/netdev_rss_key | wc -c
768
tjbp26:~# ethtool -x eth1
RX flow hash indirection table for eth1 with 32 RX ring(s):
...
RSS hash key:
fe:16:5b:2f:93:85:c2:c9:c1:ef:bd:60:c6:e0:2b:99:4d:bf:b7:14:c8:1e:8d:cb:31:17:51:da:55:eb:91:d9:9e:f9:89:9b:44:a1:dc:08:72:3a:b3:d6:31:86:9a:fe:02:3a:0d:eb:a1:7c:f5:a3:51:3b:08:56:c9:3f:71:69:01:ba:70:38
RSS hash function:
toeplitz: on
xor: off
crc32: off
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/netdev/20260122075206.504ec591@kernel.org/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260122190349.2771064-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|