| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
It turns out that warning about which USB host controller is loaded
before another one doesn't really matter. All that really is needed is
the PCI softdep module loading logic, which has been present in the
kernel ever since commit 05c92da0c524 ("usb: ohci/uhci - add soft
dependencies on ehci_pci")
So remove the warning messages, they are not useful, not needed, and
only confuse people. As can be seen in the discussion at
https://lore.kernel.org/r/20251230080014.3934590-1-chenhuacai@loongson.cn
Cc: Huacai Chen <chenhuacai@loongson.cn>
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://patch.msgid.link/2026010739-diffuser-shelter-e31c@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add support for MIPI I3C Host Controllers with the Multi-Bus Instance
capability. These controllers can host multiple I3C buses (up to 15)
within a single hardware function (e.g., PCIe B/D/F), providing one
indepedent HCI register set and corresponding I3C bus controller logic
per bus.
A separate platform device will represent each instance, but it is
necessary to allow for shared resources.
Multi-bus instances share the same MMIO address space, but the ranges are
not guaranteed to be contiguous. To avoid overlapping mappings, pass
base_regs from the parent mapping to child devices.
Allow the IRQ to be shared among instances.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260106164416.67074-8-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
When I3C is disabled, unused functions are removed by the linker because
the driver relies on regmap and no I3C devices are registered, so normal
I3C paths are never called.
However, some drivers may still call low-level I3C transfer helpers.
Provide stub implementations to avoid adding conditional ifdefs everywhere.
Add stubs for i3c_device_do_xfers() and
i3c_device_get_supported_xfer_mode() only. Other stubs will be introduced
when they are actually needed.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202512230418.nu3V6Yua-lkp@intel.com/
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20251230145718.4088694-1-Frank.Li@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Drop i3c_priv_xfer and i3c_device_do_priv_xfers() after all driver switch
to use new API.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20251215172405.2982801-1-Frank.Li@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Add an extended feature flag NL80211_EXT_FEATURE_EPPKE to allow a
driver to indicate support for the Enhanced Privacy Protection Key
Exchange (EPPKE) authentication protocol in non-AP STA mode, as
defined in "IEEE P802.11bi/D3.0, 12.16.9".
In case of SME in userspace, the Authentication frame body is prepared
in userspace while the driver finalizes the Authentication frame once
it receives the required fields and elements. The driver indicates
support for EPPKE using the extended feature flag so that userspace
can initiate EPPKE authentication.
When the feature flag is set, process EPPKE Authentication frames from
userspace in non-AP STA mode. If the flag is not set, reject EPPKE
Authentication frames.
Define a new authentication type NL80211_AUTHTYPE_EPPKE for EPPKE.
Signed-off-by: Ainy Kumari <ainy.kumari@oss.qualcomm.com>
Co-developed-by: Kavita Kavita <kavita.kavita@oss.qualcomm.com>
Signed-off-by: Kavita Kavita <kavita.kavita@oss.qualcomm.com>
Link: https://patch.msgid.link/20260114111900.2196941-2-kavita.kavita@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
phy common properties
Vladimir Oltean <vladimir.oltean@nxp.com> wrote:
Introduce "rx-polarity" and "tx-polarity" device tree properties with
Kunit tests
|
|
Add helpers in the generic PHY folder which can be used using 'select
PHY_COMMON_PROPS' from Kconfig, without otherwise needing to
enable GENERIC_PHY.
These helpers need to deal with the slight messiness of the fact that
the polarity properties are arrays per protocol, and with the fact that
there is no default value mandated by the standard properties, all
default values depend on driver and protocol (PHY_POL_NORMAL may be a
good default for SGMII, whereas PHY_POL_AUTO may be a good default for
PCIe).
Push the supported mask of polarities to these helpers, to simplify
drivers such that they don't need to validate what's in the device tree
(or other firmware description).
Add a KUnit test suite to make sure that the API produces the expected
results. The fact that we use fwnode structures means we can validate
with software nodes, and as opposed to the device_property API, we can
bypass the need to have a device structure.
Co-developed-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20260111093940.975359-6-vladimir.oltean@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-linus
Jonathan writes:
IIO: 1st set of fixes for the 6.19 cycle
The usual mixed bag of fixes for ancient problems plus some more
recent ones.
adi,ad7280a
- Check for errors from spi_setup().
adi,ad3552r
- Fix potential buffer overflow when setting to use the internal ramp.
adi,ax5695r
- Fill in the data for this device in the chip info table.
adi,ad7606
- Don't store a negative error in an unsigned int.
adi,ad9467
- Fix incorrect register mask value.
adi,adxl380
- Fix inverted condition for whether INT1 interrupt present in dt.
atmel,at91-sama5d2
- Cancel work on remove to avoid a potential use-after-free
invensense,icm45600
- Fix temperature scaling.
samsung,eynos_adc
- Use of_platform_depolulate() to correctly clear up such that child
devices are created correctly if the driver is rebound.
sensiron,scd4x
- Fix incorrect endianness reported to user-space.
st,accel
- Fix gain reported for the iis329dq.
st,lsm6dsx
- Hide event related interfaces on parts that don't support events.
ti,pac1934
- Ensure output of clamp() is used rather than unclamped value.
* tag 'iio-fixes-for-6.19a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
iio: dac: ad3552r-hs: fix out-of-bound write in ad3552r_hs_write_data_source
iio: accel: iis328dq: fix gain values
iio: core: add separate lockdep class for info_exist_lock
iio: chemical: scd4x: fix reported channel endianness
iio: imu: inv_icm45600: fix temperature offset reporting
iio: adc: exynos_adc: fix OF populate on driver rebind
iio: dac: ad5686: add AD5695R to ad5686_chip_info_tbl
iio: accel: adxl380: fix handling of unavailable "INT1" interrupt
iio: imu: st_lsm6dsx: fix iio_chan_spec for sensors without event detection
iio: adc: pac1934: Fix clamped value in pac1934_reg_snapshot
iio: adc: ad9467: fix ad9434 vref mask
iio: adc: ad7606: Fix incorrect type for error return variable
iio: adc: ad7280a: handle spi_setup() errors in probe()
iio: adc: at91-sama5d2_adc: Fix potential use-after-free in sama5d2_adc driver
|
|
Add a generic TEE revision sysfs attribute backed by a new
optional get_tee_revision() callback. The revision string is
diagnostic-only and must not be used to infer feature support.
Signed-off-by: Aristo Chen <aristo.chen@canonical.com>
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
The last user of defined structures s3c_hwmon_pdata and s3c_hwmon_chcfg
was removed in commit 0d297df03890 ("ARM: s3c: simplify platform code"),
thus the platform data header file itself can be removed also.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Link: https://patch.msgid.link/20260112211554.3755188-1-vz@mleia.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
When a non-NCQ command is issued while NCQ commands are being executed,
ata_scsi_qc_issue() indicates to the SCSI layer that the command issuing
should be deferred by returning SCSI_MLQUEUE_XXX_BUSY. This command
deferring is correct and as mandated by the ACS specifications since
NCQ and non-NCQ commands cannot be mixed.
However, in the case of a host adapter using multiple submission queues,
when the target device is under a constant load of NCQ commands, there
are no guarantees that requeueing the non-NCQ command will be executed
later and it may be deferred again repeatedly as other submission queues
can constantly issue NCQ commands from different CPUs ahead of the
non-NCQ command. This can lead to very long delays for the execution of
non-NCQ commands, and even complete starvation for these commands in the
worst case scenario.
Since the block layer and the SCSI layer do not distinguish between
queueable (NCQ) and non queueable (non-NCQ) commands, libata-scsi SAT
implementation must ensure forward progress for non-NCQ commands in the
presence of NCQ command traffic. This is similar to what SAS HBAs with a
hardware/firmware based SAT implementation do.
Implement such forward progress guarantee by limiting requeueing of
non-NCQ commands from ata_scsi_qc_issue(): when a non-NCQ command is
received and NCQ commands are in-flight, do not force a requeue of the
non-NCQ command by returning SCSI_MLQUEUE_XXX_BUSY and instead return 0
to indicate that the command was accepted but hold on to the qc using
the new deferred_qc field of struct ata_port.
This deferred qc will be issued using the work item deferred_qc_work
running the function ata_scsi_deferred_qc_work() once all in-flight
commands complete, which is checked with the port qc_defer() callback
return value indicating that no further delay is necessary. This check
is done using the helper function ata_scsi_schedule_deferred_qc() which
is called from ata_scsi_qc_complete(). This thus excludes this mechanism
from all internal non-NCQ commands issued by ATA EH.
When a port deferred_qc is non NULL, that is, the port has a command
waiting for the device queue to drain, the issuing of all incoming
commands (both NCQ and non-NCQ) is deferred using the regular busy
mechanism. This simplifies the code and also avoids potential denial of
service problems if a user issues too many non-NCQ commands.
Finally, whenever ata EH is scheduled, regardless of the reason, a
deferred qc is always requeued so that it can be retried once EH
completes. This is done by calling the function
ata_scsi_requeue_deferred_qc() from ata_eh_set_pending(). This avoids
the need for any special processing for the deferred qc in case of NCQ
error, link or device reset, or device timeout.
Reported-by: Xingui Yang <yangxingui@huawei.com>
Reported-by: Igor Pylypiv <ipylypiv@google.com>
Fixes: bdb01301f3ea ("scsi: Add host and host template flag 'host_tagset'")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Tested-by: Igor Pylypiv <ipylypiv@google.com>
Tested-by: Xingui Yang <yangxingui@huawei.com>
|
|
It would be useful to be able to check for potential DMA pages beyond
just ZONE_DMA - generalise the existing has_managed_dma() function to
allow checking other zones too.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: David Hildenbrand (Red Hat) <david@kernel.org>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Tested-by: Vladimir Kondratiev <vladimir.kondratiev@mobileye.com>
Reviewed-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/bd002d2351074e57be1ca08f03f333debac658fb.1768230104.git.robin.murphy@arm.com
|
|
The cache parameter of getcpu() is useless nowadays for various reasons.
* It is never passed by userspace for either the vDSO or syscalls.
* It is never used by the kernel.
* It could not be made to work on the current vDSO architecture.
* The structure definition is not part of the UAPI headers.
* vdso_getcpu() is superseded by restartable sequences in any case.
Remove the struct and its header.
As a side-effect this gets rid of an unwanted inclusion of the linux/
header namespace from vDSO code.
[ tglx: Adapt to s390 upstream changes */
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Heiko Carstens <hca@linux.ibm.com> # s390
Link: https://patch.msgid.link/20251230-getcpu_cache-v3-1-fb9c5f880ebe@linutronix.de
|
|
In commit 3bdbd0858df6 ("Input: adp5589: remove the driver") the last user
of include/linux/input/adp5589.h was removed along with the whole driver,
thus the header file can be also removed.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Fixes: 3bdbd0858df6 ("Input: adp5589: remove the driver")
Link: https://patch.msgid.link/20260113151140.3843753-1-vz@mleia.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
drivers-for-6.20
Merge the support for loading and managing the TrustZone-based remote
processors found in the Glymur platform through a topic branch, as it's
a mix of qcom-soc and remoteproc patches.
|
|
Now that all PHY drivers that support downstream SFP have been converted
to phy_port serdes handling, we can make the generic PHY SFP handling
mandatory, thus making all phylib sfp helpers static.
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260108080041.553250-14-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert the Marvell10G driver to use the generic SFP handling, through a
dedicated .attach_port() handler to populate the port's supported
interfaces.
As the 88x3310 supports multiple MDI, the .attach_port() logic handles
both SFP attach with 10GBaseR support, and support for the "regular"
port that usually is a BaseT port.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260108080041.553250-11-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There are currently 4 PHY drivers that can drive downstream SFPs:
marvell.c, marvell10g.c, at803x.c and marvell-88x2222.c. Most of the
logic is boilerplate, either calling into generic phylib helpers (for
SFP PHY attach, bus attach, etc.) or performing the same tasks with a
bit of validation :
- Getting the module's expected interface mode
- Making sure the PHY supports it
- Optionaly perform some configuration to make sure the PHY outputs
the right mode
This can be made more generic by leveraging the phy_port, and its
configure_mii() callback which allows setting a port's interfaces when
the port is a serdes.
Introduce a generic PHY SFP support. If a driver doesn't probe the SFP
bus itself, but an SFP phandle is found in devicetree/firmware, then the
generic PHY SFP support will be used, relying on port ops.
PHY driver need to :
- Register a .attach_port() callback
- When a serdes port is registered to the PHY, drivers must set
port->interfaces to the set of PHY_INTERFACE_MODE the port can output
- If the port has limitations regarding speed, duplex and aneg, the
port can also fine-tune the final linkmodes that can be supported
- The port may register a set of ops, including .configure_mii(), that
will be called at module_insert time to adjust the interface based on
the module detected.
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260108080041.553250-8-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Ethernet provides a wide variety of layer 1 protocols and standards for
data transmission. The front-facing ports of an interface have their own
complexity and configurability.
Introduce a representation of these front-facing ports. The current code
is minimalistic and only support ports controlled by PHY devices, but
the plan is to extend that to SFP as well as raw Ethernet MACs that
don't use PHY devices.
This minimal port representation allows describing the media and number
of pairs of a BaseT port. From that information, we can derive the
linkmodes usable on the port, which can be used to limit the
capabilities of an interface.
For now, the port pairs and medium is derived from devicetree, defined
by the PHY driver, or populated with default values (as we assume that
all PHYs expose at least one port).
The typical example is 100M ethernet. 100BaseTX works using only 2
pairs on a Cat 5 cables. However, in the situation where a 10/100/1000
capable PHY is wired to its RJ45 port through 2 pairs only, we have no
way of detecting that. The "max-speed" DT property can be used, but a
more accurate representation can be used :
mdi {
connector-0 {
media = "BaseT";
pairs = <2>;
};
};
From that information, we can derive the max speed reachable on the
port.
Another benefit of having that is to avoid vendor-specific DT properties
(micrel,fiber-mode or ti,fiber-mode).
This basic representation is meant to be expanded, by the introduction
of port ops, userspace listing of ports, and support for multi-port
devices.
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260108080041.553250-4-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In an effort to have a better representation of Ethernet ports,
introduce enumeration values representing the various ethernet Mediums.
This is part of the 802.3 naming convention, for example :
1000 Base T 4
| | | |
| | | \_ pairs (4)
| | \___ Medium (T == Twisted Copper Pairs)
| \_______ Baseband transmission
\____________ Speed
Other example :
10000 Base K X 4
| | \_ lanes (4)
| \___ encoding (BaseX is 8b/10b while BaseR is 66b/64b)
\_____ Medium (K is backplane ethernet)
In the case of representing a physical port, only the medium and number
of pairs should be relevant. One exception would be 1000BaseX, which is
currently also used as a medium in what appears to be any of 1000BaseSX,
1000BaseCX, 1000BaseLX, 1000BaseEX, 1000BaseBX10 and some other.
This was reflected in the mediums associated with the 1000BaseX linkmode.
These mediums are set in the net/ethtool/common.c lookup table that
maintains a list of all linkmodes with their number of pairs, medium,
encoding, speed and duplex.
One notable exception to this is 100BaseT Ethernet. It emcompasses 100BaseTX,
which is a 2-pairs protocol but also 100BaseT4, that will also work on 4-pairs
cables. As we don't make a disctinction between these, the lookup table
contains 2 sets of pair numbers, indicating the min number of pairs for a
protocol to work and the "nominal" number of pairs as well.
Another set of exceptions are linkmodes such 100000baseLR4_ER4, where
the same link mode seems to represent 100GBaseLR4 and 100GBaseER4. The
macro __DEFINE_LINK_MODE_PARAMS_MEDIUMS is here used to populate the
.mediums bitfield with all appropriate mediums.
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260108080041.553250-3-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Tariq Toukan says:
====================
mlx5-next updates 2026-01-13
* 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
net/mlx5: Add IFC bits for extended ETS rate limit bandwidth value
net/mlx5: Add support for querying bond speed
net/mlx5: Handle port and vport speed change events in MPESW
net/mlx5: Propagate LAG effective max_tx_speed to vports
net/mlx5: Add max_tx_speed and its CAP bit to IFC
====================
Link: https://patch.msgid.link/1768299471-1603093-1-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Improve btf_find_by_name_kind() performance by adding binary search
support for sorted types. Falls back to linear search for compatibility.
Signed-off-by: Donglin Peng <pengdonglin@xiaomi.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260109130003.3313716-7-dolinux.peng@gmail.com
|
|
... or visible outside of audit, really. Note that references
held in delayed_filename always have refcount 1, and from the
moment of complete_getname() or equivalent point in getname...()
there won't be any references to struct filename instance left
in places visible to other threads.
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
There are two filename-related problems in io_uring and its
interplay with audit.
Filenames are imported when request is submitted and used when
it is processed. Unfortunately, the latter may very well
happen in a different thread. In that case the reference to
filename is put into the wrong audit_context - that of submitting
thread, not the processing one. Audit logics is called by
the latter, and it really wants to be able to find the names
in audit_context current (== processing) thread.
Another related problem is the headache with refcounts -
normally all references to given struct filename are visible
only to one thread (the one that uses that struct filename).
io_uring violates that - an extra reference is stashed in
audit_context of submitter. It gets dropped when submitter
returns to userland, which can happen simultaneously with
processing thread deciding to drop the reference it got.
We paper over that by making refcount atomic, but that means
pointless headache for everyone.
Solution: the notion of partially imported filenames. Namely,
already copied from userland, but *not* exposed to audit yet.
io_uring can create that in submitter thread, and complete the
import (obtaining the usual reference to struct filename) in
processing thread.
Object: struct delayed_filename.
Primitives for working with it:
delayed_getname(&delayed_filename, user_string) - copies the name from
userland, returning 0 and stashing the address of (still incomplete)
struct filename in delayed_filename on success and returning -E... on
error.
delayed_getname_uflags(&delayed_filename, user_string, atflags) -
similar, in the same relation to delayed_getname() as getname_uflags()
is to getname()
complete_getname(&delayed_filename) - completes the import of filename
stashed in delayed_filename and returns struct filename to caller,
emptying delayed_filename.
CLASS(filename_complete_delayed, name)(&delayed_filename) - variant of
CLASS(filename) with complete_getname() for constructor.
dismiss_delayed_filename(&delayed_filename) - destructor; drops whatever
might be stashed in delayed_filename, emptying it.
putname_to_delayed(&delayed_filename, name) - if name is shared, stashes
its copy into delayed_filename and drops the reference to name, otherwise
stashes the name itself in there.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Always allocate struct filename from names_cachep, long name or short;
short names would be embedded into struct filename. Longer ones do
not cannibalize the original struct filename - put them into kmalloc'ed
buffers (PATH_MAX-sized for import from userland, strlen() + 1 - for
ones originating kernel-side, where we know the length beforehand).
Cutoff length for short names is chosen so that struct filename would be
192 bytes long - that's both a multiple of 64 and large enough to cover
the majority of real-world uses.
Simplifies logics in getname()/putname() and friends.
[fixed an embarrassing braino in EMBEDDED_NAME_MAX, first reported by
Dan Carpenter]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Instances of struct filename come from names_cachep (via
__getname()). That is done by getname_flags() and getname_kernel()
and these two are the main callers of __getname(). However, there are
other callers that simply want to allocate PATH_MAX bytes for uses that
have nothing to do with struct filename.
We want saner allocation rules for long pathnames, so that struct
filename would *always* come from names_cachep, with the out-of-line
pathname getting kmalloc'ed. For that we need to be able to change the
size of objects allocated by getname_flags()/getname_kernel().
That requires the rest of __getname() users to stop using
names_cachep; we could explicitly switch all of those to kmalloc(),
but that would cause quite a bit of noise. So the plan is to switch
getname_...() to new helpers and turn __getname() into a wrapper for
kmalloc(). Remaining __getname() users could be converted to explicit
kmalloc() at leisure, hopefully along with figuring out what size do
they really want - PATH_MAX is an overkill for some of them, used out
of laziness ("we have a convenient helper that does 4K allocations and
that's large enough, let's use it").
As a side benefit, names_cachep is no longer used outside
of fs/namei.c, so we can move it there and be done with that.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Originally we tried to avoid multiple insertions into audit names array
during retry loop by a cute hack - memorize the userland pointer and
if there already is a match, just grab an extra reference to it.
Cute as it had been, it had problems - two identical pointers had
audit aux entries merged, two identical strings did not. Having
different behaviour for syscalls that differ only by addresses of
otherwise identical string arguments is obviously wrong - if nothing
else, compiler can decide to merge identical string literals.
Besides, this hack does nothing for non-audited processes - they get
a fresh copy for retry. It's not time-critical, but having behaviour
subtly differ that way is bogus.
These days we have very few places that import filename more than once
(9 functions total) and it's easy to massage them so we get rid of all
re-imports. With that done, we don't need audit_reusename() anymore.
There's no need to memorize userland pointer either.
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Not all users match that model, but most of them do. By the end of
the series we'll be left with very few irregular ones...
Added:
CLASS(filename, name)(user_path) =>
getname(user_path)
CLASS(filename_kernel, name)(string) =>
getname_kernel(string)
CLASS(filename_flags, name)(user_path, flags) =>
getname_flags(user_path, flags)
CLASS(filename_uflags, name)(user_path, flags) =>
getname_uflags(user_path, flags)
CLASS(filename_maybe_null, name)(user_path, flags) =>
getname_maybe_null(user_path, flags)
all with putname() as destructor.
"flags" in filename_flags is in LOOKUP_... space, only LOOKUP_EMPTY matters.
"flags" in filename_uflags and filename_maybe_null is in AT_...... space,
and only AT_EMPTY_PATH matters.
filename_flags conventions might be worth reconsidering later (it might or
might not be better off with boolean instead)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Qualcomm remote processor may rely on Static and Dynamic resources for
it to be functional. Static resources are fixed like for example,
memory-mapped addresses required by the subsystem and dynamic
resources, such as shared memory in DDR etc., are determined at
runtime during the boot process.
For most of the Qualcomm SoCs, when run with Gunyah or older QHEE
hypervisor, all the resources whether it is static or dynamic, is
managed by the hypervisor. Dynamic resources if it is present for a
remote processor will always be coming from secure world via SMC call
while static resources may be present in remote processor firmware
binary or it may be coming qcom_scm_pas_get_rsc_table() SMC call along
with dynamic resources.
Some of the remote processor drivers, such as video, GPU, IPA, etc., do
not check whether resources are present in their remote processor
firmware binary. In such cases, the caller of this function should set
input_rt and input_rt_size as NULL and zero respectively. Remoteproc
framework has method to check whether firmware binary contain resources
or not and they should be pass resource table pointer to input_rt and
resource table size to input_rt_size and this will be forwarded to
TrustZone for authentication. TrustZone will then append the dynamic
resources and return the complete resource table in the passed output
buffer.
More about documentation on resource table format can be found in
include/linux/remoteproc.h
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260105-kvmrprocv10-v10-11-022e96815380@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
For memory passed to TrustZone (TZ), it must either be part of a pool
registered with TZ or explicitly registered via SHMbridge SMC calls.
When Gunyah hypervisor is present, PAS SMC calls from Linux running at
EL1 are trapped by Gunyah running @ EL2, which handles SHMbridge
creation for both metadata and remoteproc carveout memory before
invoking the calls to TZ.
On SoCs running with a non-Gunyah-based hypervisor, Linux must take
responsibility for creating the SHM bridge before invoking PAS SMC
calls. For the auth_and_reset() call, the remoteproc carveout memory
must first be registered with TZ via a SHMbridge SMC call and once
authentication and reset are complete, the SHMbridge memory can be
deregistered.
Introduce qcom_scm_pas_prepare_and_auth_reset(), which sets up the SHM
bridge over the remoteproc carveout memory when Linux operates at EL2.
This behavior is indicated by a new field added to the PAS context data
structure. The function then invokes the auth_and_reset SMC call.
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260105-kvmrprocv10-v10-8-022e96815380@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
qcom_mdt_pas_init() was previously used only by the remoteproc driver
(drivers/remoteproc/qcom_q6v5_pas.c). Since that driver has now
transitioned to using PAS context-based qcom_mdt_pas_load() function,
making qcom_mdt_pas_init() obsolete for external use.
Removes qcom_mdt_pas_init() from the list of exported symbols and make
it static to limit its scope to internal use within mdtloader.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260105-kvmrprocv10-v10-7-022e96815380@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Introduce a new PAS context-aware function, qcom_mdt_pas_load(), for
remote processor drivers. This function utilizes the PAS context
pointer returned from qcom_scm_pas_ctx_init() to perform firmware
metadata verification and memory setup via SMC calls.
The qcom_mdt_pas_load() and qcom_mdt_load() functions are largely
similar, but the former is designed for clients using the PAS
context-based data structure. Over time, all users of qcom_mdt_load()
can be migrated to use qcom_mdt_pas_load() for consistency and
improved abstraction.
As the remoteproc PAS driver (qcom_q6v5_pas) has already adopted the
PAS context-based approach, update it to use qcom_mdt_pas_load().
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260105-kvmrprocv10-v10-6-022e96815380@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
As a superset of the existing metadata context, the PAS context
structure enables both remoteproc and non-remoteproc subsystems to
better support scenarios where the SoC runs with or without the Gunyah
hypervisor. To reflect this, relevant SCM and metadata functions are
updated to incorporate PAS context awareness and remove metadata context
data structure completely.
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260105-kvmrprocv10-v10-5-022e96815380@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
When the Peripheral Authentication Service (PAS) method runs on a SoC
where Linux operates at EL2 (i.e., without the Gunyah hypervisor), the
reset sequences are handled by TrustZone. In such cases, Linux must
perform additional steps before invoking PAS SMC calls, such as creating
a SHM bridge. Therefore, PAS SMC calls require awareness and handling of
these additional steps when Linux runs at EL2.
To support this, there is a need for a data structure that can be
initialized prior to invoking any SMC or MDT functions. This structure
allows those functions to determine whether they are operating in the
presence or absence of the Gunyah hypervisor and behave accordingly.
Currently, remoteproc and non-remoteproc subsystems use different
variants of the MDT loader helper API, primarily due to differences in
metadata context handling. Remoteproc subsystems retain the metadata
context until authentication and reset are completed, while
non-remoteproc subsystems (e.g., video, graphics, IPA, etc.) do not
retain the metadata context and can free it within the
qcom_scm_pas_init() call by passing a NULL context parameter and due to
these differences, it is not possible to extend metadata context
handling to support remoteproc and non remoteproc subsystem use PAS
operations, when Linux operates at EL2.
Add PAS context data structure allocator helper function.
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260105-kvmrprocv10-v10-4-022e96815380@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Peripheral and pas_id refers to unique id for a subsystem and used only
when peripheral authentication service from secure world is utilized.
Lets rename peripheral to pas_id to reflect closer to its meaning.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260105-kvmrprocv10-v10-3-022e96815380@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
ASPEED BMC controllers have VGA and USB functions behind a PCIe-to-PCI
bridge that causes them to share the same StreamID:
[e0]---00.0-[e1-e2]----00.0-[e2]--+-00.0 ASPEED Graphics Family
\-02.0 ASPEED USB Controller
Both devices get StreamID 0x5e200 due to bridge aliasing, causing the USB
controller to be rejected with 'Aliasing StreamID unsupported'.
Per ASPEED, the AST1150 doesn't use a real PCI bus and always forwards
the original Requester ID from downstream devices rather than replacing
it with any alias.
Add a new PCI_DEV_FLAGS_PCI_BRIDGE_NO_ALIAS flag and apply it to the
AST1150.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nirmoy Das <nirmoyd@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://patch.msgid.link/20251217154529.377586-2-nirmoyd@nvidia.com
|
|
The is going to be a new user of the HZ_PER_GHZ definition besides
possibly existing ones. Add that one to the header.
While at it, split Hz and kHz groups of the multipliers for better
maintenance and readability.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260112134900.4142954-2-andriy.shevchenko@linux.intel.com
|
|
It's quite likely that only register opcode restrictions exists, in
which case we'd never need to check the normal opcodes. Split
ctx->restricted into two separate fields, one for I/O opcodes, and one
for register opcodes.
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Document sysfs attribute dev_nack_retry_cnt that controls the number of
automatic retries performed by the I3C controller when a target device
returns a NACK
Add a `dev_nack_retry_count` sysfs attribute to allow reading and updating
the device NACK retry count. A new `dev_nack_retry_count` field and an
optional `set_dev_nack_retry()` callback are added to
i3c_master_controller. The attribute is created only when the callback is
implemented.
Updates are applied under the I3C bus maintenance lock to ensure safe
hardware reconfiguration.
Signed-off-by: Adrian Ng Ho Yin <adrianhoyin.ng@altera.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/3c4b5082bde64024fc383c44bebeef89ad3c7ed3.1765529948.git.adrianhoyin.ng@altera.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
DMA IOVA state is not used inside blk_rq_dma_map_iter_next, get
rid of the argument.
Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The ROHM BD72720 is a power management IC which continues the BD71828
family of PMICs. Similarly to the BD71815 and BD71828, the BD72720
integrates regulators, charger, RTC, clock gate and GPIOs.
The main difference to the earlier PMICs is that the BD72720 has two
different I2C slave addresses. In addition to the registers behind the
'main I2C address', most of the charger (and to some extent LED) control
is done via registers behind a 'secondary I2C slave address', 0x4c.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://patch.msgid.link/c7b3f1b25616a0add21cea38019e50a89873b6ac.1765804226.git.mazziesaccount@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Merge series from Andreas Kemnade <andreas@kemnade.info>:
Add a driver for the TPS65185 regulator which provides the
comparatively high voltages needed for electronic paper displays.
Datasheet for the TPS65185 is at https://www.ti.com/lit/gpn/tps65185
To simplify things, include the hwmon part directly which is only
one temperature sensor and there are no other functions besides regulators
in this chip.
|
|
The return value of struct device_driver::remove is ignored by the core
(see device_remove() in drivers/base/dd.c). So it doesn't make sense to
let the host1x remove callback return an int just to ignore it later.
So make the callback return void. All current implementors return 0, so
they are easily converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # tegra20 tegra-video
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/d364fd4ec043d36ee12e46eaef98c57658884f63.1765355236.git.u.kleine-koenig@baylibre.com
|
|
A fix for the dl_server 'requires' idle_cpu() usage, which made me
note that it and available_idle_cpu() are extern function calls.
And while idle_cpu() is used outside of kernel/sched/,
available_idle_cpu() is not.
This makes it hard to make idle_cpu() an inline helper, so provide
idle_rq() and implement idle_cpu() and available_idle_cpu() using
that.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
Since ktime_t has become an alias to s64, these helpers are unnecessary.
Migrate the few remaining users to the regular helpers and remove the
now dead code.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260107-hrtimer-header-cleanup-v1-3-1a698ef0ddae@linutronix.de
|
|
This constant is only used in a single place and is has a very generic
name polluting the global namespace.
Move the constant closer to its only user.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260107-hrtimer-header-cleanup-v1-2-1a698ef0ddae@linutronix.de
|
|
These constants are never used, remove them.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260107-hrtimer-header-cleanup-v1-1-1a698ef0ddae@linutronix.de
|
|
Create some wrapper code around struct super_block so that filesystems
have a standard way to queue filesystem metadata and file I/O error
reports to have them sent to fsnotify.
If a filesystem wants to provide an error number, it must supply only
negative error numbers. These are stored internally as negative
numbers, but they are converted to positive error numbers before being
passed to fanotify, per the fanotify(7) manpage. Implementations of
super_operations::report_error are passed the raw internal event data.
Note that we have to play some shenanigans with mempools and queue_work
so that the error handling doesn't happen outside of process context,
and the event handler functions (both ->report_error and fsnotify) can
handle file I/O error messages without having to worry about whatever
locks might be held. This asynchronicity requires that unmount wait for
pending events to clear.
Add a new callback to the superblock operations structure so that
filesystem drivers can themselves respond to file I/O errors if they so
desire. This will be used for an upcoming self-healing patchset for
XFS.
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Link: https://patch.msgid.link/176826402610.3490369.4378391061533403171.stgit@frogsfrogsfrogs
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Stop definining these privately and instead move them to the uapi
errno.h so that they become canonical instead of copy pasta.
Cc: linux-api@vger.kernel.org
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Link: https://patch.msgid.link/176826402587.3490369.17659117524205214600.stgit@frogsfrogsfrogs
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add hardware interface definitions to support extended bandwidth rate
limiting in the QoS Enhanced Transmission Selection (ETS) configuration.
The new fields include:
- max_bw_value: extended from 8-bit to 16-bit in ets_tcn_config_reg,
simplifying the implementation by using a single field instead of
separate MSB/LSB fields.
- qetcr_qshr_max_bw_val_msb: capability bit in qcam_qos_feature_cap_mask
indicating device support for the extended 16-bit max_bw_value field.
These interface additions are prerequisites for increasing the per-TC
rate limit beyond 255 Gbps to support higher-bandwidth NICs.
Signed-off-by: Alexei Lazar <alazar@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1768200608-1543180-1-git-send-email-tariqt@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
