| Age | Commit message (Collapse) | Author | Files | Lines |
|
CPU_CYCLES is expected to count the logical CPU (PE) clock. Currently it's
preferred to use PMCCNTR_EL0 for counting CPU_CYCLES, but it'll count
processor clock rather than the PE clock (ARM DDI0487 L.b D13.1.3) if
one of the SMT siblings is not idle on a multi-threaded implementation.
So don't use it on SMT cores.
Introduce topology_core_has_smt() for knowing the SMT implementation and
cached it in arm_pmu::has_smt during allocation.
When counting cycles on SMT CPU 2-3 and CPU 3 is idle, without this
patch we'll get:
[root@client1 tmp]# perf stat -e cycles -A -C 2-3 -- stress-ng -c 1
--taskset 2 --timeout 1
[...]
Performance counter stats for 'CPU(s) 2-3':
CPU2 2880457316 cycles
CPU3 2880459810 cycles
1.254688470 seconds time elapsed
With this patch the idle state of CPU3 is observed as expected:
[root@client1 ~]# perf stat -e cycles -A -C 2-3 -- stress-ng -c 1
--taskset 2 --timeout 1
[...]
Performance counter stats for 'CPU(s) 2-3':
CPU2 2558580492 cycles
CPU3 305749 cycles
1.113626410 seconds time elapsed
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Correct most kernel-doc warnings in include/linux/mtd/spear_smi.h
by adding a leading '@' to the description of struct members.
Add a new description for the missing @np member.
Warning: spear_smi.h:48 struct member 'name' not described
in 'spear_smi_flash_info'
Warning: spear_smi.h:48 struct member 'mem_base' not described
in 'spear_smi_flash_info'
Warning: spear_smi.h:48 struct member 'size' not described
in 'spear_smi_flash_info'
Warning: spear_smi.h:48 struct member 'partitions' not described
in 'spear_smi_flash_info'
Warning: spear_smi.h:48 struct member 'nr_partitions' not described
in 'spear_smi_flash_info'
Warning: spear_smi.h:48 struct member 'fast_mode' not described
in 'spear_smi_flash_info'
Warning: spear_smi.h:62 struct member 'clk_rate' not described
in 'spear_smi_plat_data'
Warning: spear_smi.h:62 struct member 'num_flashes' not described
in 'spear_smi_plat_data'
Warning: spear_smi.h:62 struct member 'board_flash_info' not described
in 'spear_smi_plat_data'
Warning: spear_smi.h:62 struct member 'np' not described
in 'spear_smi_plat_data'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
296b67059 removed fsparam_u32hex because there were no callers
(yet) and it didn't build due to using the nonexistent symbol
fs_param_is_u32_hex.
fs/9p will need this parser, so add it back with the appropriate
fix (use fs_param_is_u32).
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Message-ID: <20251010214222.1347785-2-sandeen@redhat.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
|
|
Adaptive input current allows charger to reduce it's current
consumption, when source is not able to provide enough power.
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Link: https://patch.msgid.link/20250925-max77705_77976_charger_improvement-v6-1-972c716c17d1@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
None of these functions are used, so remove them.
This renders the two bugs moot:
- get_random_u64_wait() used the wrong pointer type, making it provide
only 32 bits.
- The '#undef' directive used the wrong identifier, leaving the helper
macro defined.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Crystal reports that the PCIe Advanced Error Reporting driver gets stuck
in an infinite loop on PREEMPT_RT:
Both the primary interrupt handler aer_irq() as well as the secondary
handler aer_isr() are forced into threads with identical priority.
Crystal writes that on the ARM system in question, the primary handler
has to clear an error in the Root Error Status register...
"before the next error happens, or else the hardware will set the
Multiple ERR_COR Received bit. If that bit is set, then aer_isr()
can't rely on the Error Source Identification register, so it scans
through all devices looking for errors -- and for some reason, on
this system, accessing the AER registers (or any Config Space above
0x400, even though there are capabilities located there) generates
an Unsupported Request Error (but returns valid data). Since this
happens more than once, without aer_irq() preempting, it causes
another multi error and we get stuck in a loop."
The issue does not show on non-PREEMPT_RT because the primary handler
runs in hardirq context and thus can preempt the threaded secondary
handler, clear the Root Error Status register and prevent the secondary
handler from getting stuck.
Emulate the same behavior on PREEMPT_RT by assigning a lower default
priority to the secondary handler if the primary handler is forced into
a thread.
Reported-by: Crystal Wood <crwood@redhat.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Crystal Wood <crwood@redhat.com>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/f6dcdb41be2694886b8dbf4fe7b3ab89e9d5114c.1761569303.git.lukas@wunner.de
Closes: https://lore.kernel.org/r/20250902224441.368483-1-crwood@redhat.com/
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fixes from Mark Brown:
"One documentation fix and a fix for a problem with the slimbus regmap
which was uncovered by some changes in one of the drivers"
* tag 'regmap-fix-v6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: irq: Correct documentation of wake_invert flag
regmap: slimbus: fix bus_context pointer in regmap init calls
|
|
Add INIT_ERR_PTR() macro to initialize static variables with error
pointers. This might be useful for specific case where there is a static
variable initialized to an error condition and then later set to the
real handle once probe finish/completes.
This is to handle compilation problems like:
error: initializer element is not constant
where ERR_PTR() can't be used.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20251031130835.7953-2-ansuelsmth@gmail.com
[bjorn: Added () suffix on macro references]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Pull bpf fixes from Alexei Starovoitov:
- Mark migrate_disable/enable() as always_inline to avoid issues with
partial inlining (Yonghong Song)
- Fix powerpc stack register definition in libbpf bpf_tracing.h (Andrii
Nakryiko)
- Reject negative head_room in __bpf_skb_change_head (Daniel Borkmann)
- Conditionally include dynptr copy kfuncs (Malin Jonsson)
- Sync pending IRQ work before freeing BPF ring buffer (Noorain Eqbal)
- Do not audit capability check in x86 do_jit() (Ondrej Mosnacek)
- Fix arm64 JIT of BPF_ST insn when it writes into arena memory
(Puranjay Mohan)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf/arm64: Fix BPF_ST into arena memory
bpf: Make migrate_disable always inline to avoid partial inlining
bpf: Reject negative head_room in __bpf_skb_change_head
bpf: Conditionally include dynptr copy kfuncs
libbpf: Fix powerpc's stack register definition in bpf_tracing.h
bpf: Do not audit capability check in do_jit()
bpf: Sync pending IRQ work before freeing ring buffer
|
|
Phase-adjust values are currently limited by a min-max range. Some
hardware requires, for certain pin types, that values be multiples of
a specific granularity, as in the zl3073x driver.
Add a `phase-adjust-gran` pin attribute and an appropriate field in
dpll_pin_properties. If set by the driver, use its value to validate
user-provided phase-adjust values.
Reviewed-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Petr Oros <poros@redhat.com>
Tested-by: Prathosh Satish <Prathosh.Satish@microchip.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Link: https://patch.msgid.link/20251029153207.178448-2-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Stephen points out that some of the percpu_devid irq affinity
documentation is either missing or not matching the data structures.
Address all the issues in one go.
Fixes: 87b0031f7f73 ("irqdomain: Add firmware info reporting interface")
Fixes: 258e7d28a3dc ("genirq: Add affinity to percpu_devid interrupt requests")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20251030143032.2035987-1-maz@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block fixes from Jens Axboe:
- Fix blk-crypto reporting EIO when EINVAL is the correct error code
- Two bug fixes for the block zone support
- NVME pull request via Keith:
- Target side authentication fixup
- Peer-to-peer metadata fixup
- null_blk DMA alignment fix
* tag 'block-6.18-20251031' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
null_blk: set dma alignment to logical block size
blk-crypto: use BLK_STS_INVAL for alignment errors
block: make REQ_OP_ZONE_OPEN a write operation
block: fix op_is_zone_mgmt() to handle REQ_OP_ZONE_RESET_ALL
nvme-pci: use blk_map_iter for p2p metadata
nvmet-auth: update sc_c in host response
|
|
The build fails with llvm 21/22:
$ make LLVM=1 -j
...
LD vmlinux.o
GEN .vmlinux.objs
...
BTF .tmp_vmlinux1.btf.o
...
AS .tmp_vmlinux2.kallsyms.o
LD vmlinux.unstripped
BTFIDS vmlinux.unstripped
WARN: resolve_btfids: unresolved symbol migrate_enable
WARN: resolve_btfids: unresolved symbol migrate_disable
make[2]: *** [vmlinux.unstripped] Error 255
make[2]: *** Deleting file 'vmlinux.unstripped'
make[1]: *** [Makefile:1242: vmlinux] Error 2
make: *** [Makefile:248: __sub-make] Error 2
Two functions with identical names but different addresses are
considered ambiguous and removed by "pahole" from vmlinux BTF.
Later resolve_btfids warns since it cannot find them.
Commit 378b7708194f ("sched: Make migrate_{en,dis}able() inline") made
them inlineable in most places, but in vmlinux built with llvm 21 and 22
there are four symbols for migrate_{enable,disable}:
three static functions and one global function.
Fix the issue by marking migrate_{enable,disable} as always inline.
The alternative is to mark them as notrace/nokprobe which is more
drastic. Only bpf programs are prevented from attaching to these
functions. The rest of the tracing shouldn't be affected.
[note: Peter ok-ed the patch, Alexei rewrote commit log]
Fixes: 378b7708194f ("sched: Make migrate_{en,dis}able() inline")
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Menglong Dong <menglong.dong@linux.dev>
Link: https://lore.kernel.org/r/20251029183646.3811774-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
For now, all the kernel functions who are hooked by the fprobe will be
added to the hash table "fprobe_ip_table". The key of it is the function
address, and the value of it is "struct fprobe_hlist_node".
The budget of the hash table is FPROBE_IP_TABLE_SIZE, which is 256. And
this means the overhead of the hash table lookup will grow linearly if
the count of the functions in the fprobe more than 256. When we try to
hook all the kernel functions, the overhead will be huge.
Therefore, replace the hash table with rhltable to reduce the overhead.
Link: https://lore.kernel.org/all/20250819031825.55653-1-dongml2@chinatelecom.cn/
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.18-rc4).
No conflicts, adjacent changes:
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
ded9813d17d3 ("net: stmmac: Consider Tx VLAN offload tag length for maxSDU")
26ab9830beab ("net: stmmac: replace has_xxxx with core_type")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Can has generic implementation of ndo_eth_ioctl which implements only HW
timestamping commands. Implement generic ndo_hwtstamp callbacks and use
it in drivers instead of generic ioctl interface.
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/20251029231620.1135640-2-vadim.fedorenko@linux.dev
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Replace the open-coded implementation in ocfs2 (which loses the top
32 bits on 32-bit architectures) with a helper in pagemap.h.
Fixes: 35edec1d52c0 (ocfs2: update truncate handling of partial clusters)
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://patch.msgid.link/20251024170822.1427218-2-willy@infradead.org
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: ocfs2-devel@lists.linux.dev
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
|
|
Make it possible for pseudo filesystems to specify default dentry flags.
Link: https://patch.msgid.link/20251029-work-namespace-nstree-listns-v4-1-2e6f823ebdc0@kernel.org
Tested-by: syzbot@syzkaller.appspotmail.com
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
cgroup1 freezer piggybacks on the PM freezer, which inadvertently allowed
userspace to produce uninterruptible tasks at will. To avoid the issue,
cgroup2 freezer switched to a separate job control based mechanism. While
this happened a long time ago, the code and comment haven't been updated
making it confusing to people who aren't familiar with the history.
Rename cgroup_freezing() to cgroup1_freezing() and update comments on top of
freezing() and frozen() to clarify that cgroup2 freezer isn't covered by the
PM freezer mechanism.
Signed-off-by: Tejun Heo <tj@kernel.org>
Suggested-by: Qu Wenruo <wqu@suse.com>
Link: https://patch.msgid.link/aPZ3q6Hm865NicBC@slm.duckdns.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
next_pseudo_random32 implements a LCG with known bad statistical
properties and was only used in two pieces of testing code.
With no remaining users now, remove it.
Signed-off-by: Markus Theil <theil.markus@gmail.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Describe the "type" struct member using '@type' and move it together
with the rest of the doc for ctl_table_header to avoid a kernel-doc
warning:
Warning: include/linux/sysctl.h:178 Incorrect use of kernel-doc format:
* enum type - Enumeration to differentiate between ctl target types
Fixes: 2f2665c13af4 ("sysctl: replace child with an enumeration")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Joel Granados <joel.granados@kernel.org>
|
|
Add le64_to_cpu_array() and cpu_to_le64_array(). These mirror the
corresponding 32-bit functions.
These will be used by the BLAKE2b code.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251018043106.375964-6-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
There are two different ways that LLVM can expand kCFI operand bundles
in LLVM IR: generically in the middle end or using an architecture
specific sequence when lowering LLVM IR to machine code in the backend.
The generic pass allows any architecture to take advantage of kCFI but
the expansion of these bundles in the middle end can mess with
optimizations that may turn indirect calls into direct calls when the
call target is known at compile time, such as after inlining.
Add __nocfi_generic, dependent on an architecture selecting
CONFIG_ARCH_USES_CFI_GENERIC_LLVM_PASS, to disable kCFI bundle
generation in functions where only the generic kCFI pass may cause
problems.
Link: https://github.com/ClangBuiltLinux/linux/issues/2124
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/20251025-idpf-fix-arm-kcfi-build-error-v1-1-ec57221153ae@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
- Add APIs for UFS PHY initialization.
- Verify M-PHY TX-RX configuration readiness.
- Confirm SRAM initialization and Set SRAM bypass.
- Retrieve UFS calibration values.
Signed-off-by: Ajay Neeli <ajay.neeli@amd.com>
Acked-by: Senthil Nathan Thangaraj <senthilnathan.thangaraj@amd.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Acked-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251021113003.13650-4-ajay.neeli@amd.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add support for a generic ioctl read/write interface using which users
can request firmware to perform read/write operations on a protected and
secure address space.
The functionality is introduced through the means of two new IOCTL IDs
which extend the existing PM_IOCTL EEMI API:
- IOCTL_READ_REG
- IOCTL_MASK_WRITE_REG
The caller only passes the node id of the given device and an offset.
The base address is not exposed to the caller and internally retrieved
by the firmware. Firmware will enforce an access policy on the incoming
read/write request.
Signed-off-by: Izhar Ameer Shaikh <izhar.ameer.shaikh@amd.com>
Reviewed-by: Tanmay Shah <tanmay.shah@amd.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Signed-off-by: Ajay Neeli <ajay.neeli@amd.com>
Acked-by: Senthil Nathan Thangaraj <senthilnathan.thangaraj@amd.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Acked-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251021113003.13650-3-ajay.neeli@amd.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add an iterator for all PHY's on a MII bus, and phy_find_next()
as a prerequisite.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/cd112f15-401a-43d9-8525-9ff0965a68cd@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add the ability to append the incoming IP interface information to
ICMPv4 error messages in accordance with RFC 5837 and RFC 4884. This is
required for more meaningful traceroute results in unnumbered networks.
The feature is disabled by default and controlled via a new sysctl
("net.ipv4.icmp_errors_extension_mask") which accepts a bitmask of ICMP
extensions to append to ICMP error messages. Currently, only a single
value is supported, but the interface and the implementation should be
able to support more extensions, if needed.
Clone the skb and copy the relevant data portions before modifying the
skb as the caller of __icmp_send() still owns the skb after the function
returns. This should be fine since by default ICMP error messages are
rate limited to 1000 per second and no more than 1 per second per
specific host.
Trim or pad the packet to 128 bytes before appending the ICMP extension
structure in order to be compatible with legacy applications that assume
that the ICMP extension structure always starts at this offset (the
minimum length specified by RFC 4884).
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20251027082232.232571-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The logic in wbc_to_tag() is widely used in file systems, so modify this
function to be inline and use it in file systems.
This patch has only passed compilation tests, but it should be fine.
Signed-off-by: Julian Sun <sunjunchao@bytedance.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The relatively low minimal writeback size of 4MiB means that written back
inodes on rotational media are switched a lot. Besides introducing
additional seeks, this also can lead to extreme file fragmentation on
zoned devices when a lot of files are cached relative to the available
writeback bandwidth.
Add a superblock field that allows the file system to override the
default size.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20251017034611.651385-3-hch@lst.de
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Rename filemap_fdatawrite_range_kick to filemap_flush_range because it
is the ranged version of filemap_flush.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20251024080431.324236-11-hch@lst.de
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Use filemap_fdatawrite_range and filemap_fdatawrite_range_kick instead
of the low-level __filemap_fdatawrite_range that requires the caller
to know the internals of the writeback_control structure and remove
__filemap_fdatawrite_range now that it is trivial and only two callers
would be left.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20251024080431.324236-10-hch@lst.de
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Replace filemap_fdatawrite_wbc, which exposes a writeback_control to the
callers with a filemap_writeback helper that takes all the possible
arguments and declares the writeback_control itself.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20251024080431.324236-9-hch@lst.de
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Abstract out the btrfs-specific behavior of kicking off I/O on a number
of pages on an address_space into a well-defined helper.
Note: there is no kerneldoc comment for the new function because it is
not part of the public API.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20251024080431.324236-7-hch@lst.de
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The flat regcache will always assume the data in the cache is valid.
Since the cache is preferred over hardware access, this may shadow the
actual state of the device.
Add a new containing cache structure with the flat data table and a
bitmap indicating cache validity. REGCACHE_FLAT will still behave as
before, as the validity is ignored.
Define new cache type REGCACHE_FLAT_S: a flat cache with sparse
validity. The sparse validity is used to determine if a hardware access
should occur to initialize the cache on the fly, vs. at regmap init for
REGCACHE_FLAT. Contrary to REGCACHE_FLAT, this allows us to implement
regcache_ops.drop.
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Link: https://patch.msgid.link/20251029081248.52607-2-sander@svanheule.net
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add support for deferred userspace unwind to perf.
Where perf currently relies on in-place stack unwinding; from NMI
context and all that. This moves the userspace part of the unwind to
right before the return-to-userspace.
This has two distinct benefits, the biggest is that it moves the
unwind to a faultable context. It becomes possible to fault in debug
info (.eh_frame, SFrame etc.) that might not otherwise be readily
available. And secondly, it de-duplicates the user callchain where
multiple samples happen during the same kernel entry.
To facilitate this the perf interface is extended with a new record
type:
PERF_RECORD_CALLCHAIN_DEFERRED
and two new attribute flags:
perf_event_attr::defer_callchain - to request the user unwind be deferred
perf_event_attr::defer_output - to request PERF_RECORD_CALLCHAIN_DEFERRED records
The existing PERF_RECORD_SAMPLE callchain section gets a new
context type:
PERF_CONTEXT_USER_DEFERRED
After which will come a single entry, denoting the 'cookie' of the
deferred callchain that should be attached here, matching the 'cookie'
field of the above mentioned PERF_RECORD_CALLCHAIN_DEFERRED.
The 'defer_callchain' flag is expected on all events with
PERF_SAMPLE_CALLCHAIN. The 'defer_output' flag is expect on the event
responsible for collecting side-band events (like mmap, comm etc.).
Setting 'defer_output' on multiple events will get you duplicated
PERF_RECORD_CALLCHAIN_DEFERRED records.
Based on earlier patches by Josh and Steven.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251023150002.GR4067720@noisy.programming.kicks-ass.net
|
|
When userspace is interrupted at the start of a function, before we
get a chance to complete the frame, unwind will miss one caller.
X86 has a uprobe specific fixup for this, add bits to the generic
unwinder to support this.
Suggested-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251024145156.GM4068168@noisy.programming.kicks-ass.net
|
|
It is important to be able to unwind compat tasks too.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20250924080119.613695709@infradead.org
|
|
The unwind_task_info::unwind_mask was manipulated using a mixture of:
regular store
WRITE_ONCE()
try_cmpxchg()
set_bit()
atomic_long_*()
Clean up and make it consistently atomic_long_t.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20250924080119.384384486@infradead.org
|
|
Invert the condition of the first if and make it an early exit to
reduce an indent level for the rest fo the function.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://patch.msgid.link/20250924080118.777916262@infradead.org
|
|
To be self sufficient, the file needs to include linux/types.h. This
provides things like u32/u64 and struct callback_head.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://patch.msgid.link/20250924080118.665787071@infradead.org
|
|
There are some exceptionally long lines that cause ugly wrapping.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://patch.msgid.link/20250924080118.545274393@infradead.org
|
|
After conversion of arch code to use physical address mapping,
there are no users of .map_page() and .unmap_page() callbacks,
so let's remove them.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20251015-remove-map-page-v5-14-3bbfe3a25cdf@kernel.org
|
|
After ARM and XEN conversions to use physical addresses for the mapping,
there are no in-kernel users for map_resource/unmap_resource callbacks,
so remove them.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20251015-remove-map-page-v5-6-3bbfe3a25cdf@kernel.org
|
|
Add new .map_phys() and .unmap_phys() callbacks to dma_map_ops as a
preparation to replace .map_page() and .unmap_page() respectively.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20251015-remove-map-page-v5-1-3bbfe3a25cdf@kernel.org
|
|
The padding field in the structure was previously reserved to
maintain a stable interface for potential new fields, ensuring
compatibility with user-space shared data structures.
However,it was accidentally removed by tiantao in a prior commit,
which may lead to incompatibility between user space and the kernel.
This patch reinstates the padding to restore the original structure
layout and preserve compatibility.
Fixes: 8ddde07a3d28 ("dma-mapping: benchmark: extract a common header file for map_benchmark definition")
Cc: stable@vger.kernel.org
Acked-by: Barry Song <baohua@kernel.org>
Signed-off-by: Qinxin Xia <xiaqinxin@huawei.com>
Reported-by: Barry Song <baohua@kernel.org>
Closes: https://lore.kernel.org/lkml/CAGsJ_4waiZ2+NBJG+SCnbNk+nQ_ZF13_Q5FHJqZyxyJTcEop2A@mail.gmail.com/
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20251028120900.2265511-2-xiaqinxin@huawei.com
|
|
dma_map_benchmark is a standalone developer tool rather than an
automated selftest. It has no pass/fail criteria, expects manual
invocation, and is built as a normal userspace binary. Move it to
tools/dma/ and add a minimal Makefile.
Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Suggested-by: Barry Song <baohua@kernel.org>
Signed-off-by: Qinxin Xia <xiaqinxin@huawei.com>
Acked-by: Barry Song <baohua@kernel.org>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20251028120900.2265511-3-xiaqinxin@huawei.com
|
|
Conflicts:
kernel/sched/ext.c
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
enqueue_to_backlog() is showing up in kernel profiles on hosts
with many cores, when RFS/RPS is used.
The following softnet_data fields need to be updated:
- input_queue_tail
- input_pkt_queue (next, prev, qlen, lock)
- backlog.state (if input_pkt_queue was empty)
Unfortunately they are currenly using two cache lines:
/* --- cacheline 3 boundary (192 bytes) --- */
call_single_data_t csd __attribute__((__aligned__(64))); /* 0xc0 0x20 */
struct softnet_data * rps_ipi_next; /* 0xe0 0x8 */
unsigned int cpu; /* 0xe8 0x4 */
unsigned int input_queue_tail; /* 0xec 0x4 */
struct sk_buff_head input_pkt_queue; /* 0xf0 0x18 */
/* --- cacheline 4 boundary (256 bytes) was 8 bytes ago --- */
struct napi_struct backlog __attribute__((__aligned__(8))); /* 0x108 0x1f0 */
Add one ____cacheline_aligned_in_smp to make sure they now are using
a single cache line.
Also, because napi_struct has written fields, make @state its first field.
We want to make sure that cpus adding packets to sd->input_pkt_queue
are not slowing down cpus processing their backlog because of
false sharing.
After this patch new layout is:
/* --- cacheline 5 boundary (320 bytes) --- */
long int pad[3] __attribute__((__aligned__(64))); /* 0x140 0x18 */
unsigned int input_queue_tail; /* 0x158 0x4 */
/* XXX 4 bytes hole, try to pack */
struct sk_buff_head input_pkt_queue; /* 0x160 0x18 */
struct napi_struct backlog __attribute__((__aligned__(8))); /* 0x178 0x1f0 */
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20251024091240.3292546-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In order to allow an interface to remove an added character from the
trace_seq and seq_buf descriptors, add helper functions trace_seq_pop()
and seq_buf_pop().
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Takaya Saeki <takayas@google.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ian Rogers <irogers@google.com>
Cc: Douglas Raillard <douglas.raillard@arm.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Link: https://lore.kernel.org/20251028231148.594898736@kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|