| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[ Upstream commit 9678e53179aa7e907360f5b5b275769008a69b80 ]
The event_hist_poll() function attempts to verify whether an event file is
being removed, but this check may not occur or could be unnecessarily
delayed. This happens because hist_poll_wakeup() is currently invoked only
from event_hist_trigger() when a hist command is triggered. If the event
file is being removed, no associated hist command will be triggered and a
waiter will be woken up only after an unrelated hist command is triggered.
Fix the issue by adding a call to hist_poll_wakeup() in
remove_event_file_dir() after setting the EVENT_FILE_FL_FREED flag. This
ensures that a task polling on a hist file is woken up and receives
EPOLLERR.
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Link: https://patch.msgid.link/20260219162737.314231-3-petr.pavlu@suse.com
Fixes: 1bd13edbbed6 ("tracing/hist: Add poll(POLLIN) support on hist file")
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e4faaf65a75f650ac4366ddff5dabb826029ca5a ]
idev->mr_maxdelay is read and written locklessly,
add READ_ONCE()/WRITE_ONCE() annotations.
While we are at it, make this field an u32.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20260122172247.2429403-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit eae21beecb95a3b69ee5c38a659f774e171d730e ]
There's a logic inside GHES/CPER to detect if the section_length
is too small, but it doesn't detect if it is too big.
Currently, if the firmware receives an ARM processor CPER record
stating that a section length is big, kernel will blindly trust
section_length, producing a very long dump. For instance, a 67
bytes record with ERR_INFO_NUM set 46198 and section length
set to 854918320 would dump a lot of data going a way past the
firmware memory-mapped area.
Fix it by adding a logic to prevent it to go past the buffer
if ERR_INFO_NUM is too big, making it report instead:
[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 1
[Hardware Error]: event severity: recoverable
[Hardware Error]: Error 0, type: recoverable
[Hardware Error]: section_type: ARM processor error
[Hardware Error]: MIDR: 0xff304b2f8476870a
[Hardware Error]: section length: 854918320, CPER size: 67
[Hardware Error]: section length is too big
[Hardware Error]: firmware-generated error record is incorrect
[Hardware Error]: ERR_INFO_NUM is 46198
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
[ rjw: Subject and changelog tweaks ]
Link: https://patch.msgid.link/41cd9f6b3ace3cdff7a5e864890849e4b1c58b63.1767871950.git.mchehab+huawei@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 47bf2e813817159f4d195be83a9b5a640ee6baec ]
Driver is using num_vhca_ports capability to distinguish between
multiport master device and multiport slave device. num_vhca_ports is a
capability the driver sets according to the MAX num_vhca_ports
capability reported by FW. On the other hand, light SFs doesn't set the
above capbility.
This leads to wrong results whenever light SFs is checking whether he is
a multiport master or slave.
Therefore, use the MAX capability to distinguish between master and
slave devices.
Fixes: e71383fb9cd1 ("net/mlx5: Light probe local SFs")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Jacob Keller <Jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260218072904.1764634-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2cb13dec8c5e5e104fd2f71c2dee761d6ed9a333 ]
__cacheline_group_begin(), unfortunately, doesn't align the group
anyhow. If it is wanted, then you need to do something like
__cacheline_group_begin(grp) __aligned(ALIGN)
which isn't really convenient nor compact.
Add the _aligned() counterparts to align the groups automatically to
either the specified alignment (optional) or ``SMP_CACHE_BYTES``.
Note that the actual struct layout will then be (on x64 with 64-byte CL):
struct x {
u32 y; // offset 0, size 4, padding 56
__cacheline_group_begin__grp; // offset 64, size 0
u32 z; // offset 64, size 4, padding 4
__cacheline_group_end__grp; // offset 72, size 0
__cacheline_group_pad__grp; // offset 72, size 0, padding 56
u32 w; // offset 128
};
The end marker is aligned to long, so that you can assert the struct
size more strictly, but the offset of the next field in the structure
will be aligned to the group alignment, so that the next field won't
fall into the group it's not intended to.
Add __LARGEST_ALIGN definition and LARGEST_ALIGN() macro.
__LARGEST_ALIGN is the value to which the compilers align fields when
__aligned_largest is specified. Sometimes, it might be needed to get
this value outside of variable definitions. LARGEST_ALIGN() is macro
which just aligns a value to __LARGEST_ALIGN.
Also add SMP_CACHE_ALIGN(), similar to L1_CACHE_ALIGN(), but using
``SMP_CACHE_BYTES`` instead of ``L1_CACHE_BYTES`` as the former
also accounts L2, needed in some cases.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Stable-dep-of: 87b08913a9ae ("inet: move icmp_global_{credit,stamp} to a separate cache line")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit aeb9ce058d7c6193dc41e06b3a5b29d22c446b14 ]
Set up build time warnings to safeguard against future header changes of
organized structs.
Warning includes:
1) whether all variables are still in the same cache group
2) whether all the cache groups have the sum of the members size (in the
maximum condition, including all members defined in configs)
The __cache_group* variables are ignored in kernel-doc check in the
various header files they appear in to enforce the cache groups.
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Coco Li <lixiaoyan@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 87b08913a9ae ("inet: move icmp_global_{credit,stamp} to a separate cache line")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 133c4c0d37175f510a10fa9bed51e223936073fc ]
This idea came after a particular workload requested
the quickack attribute set on routes, and a performance
drop was noticed for large bulk transfers.
For high throughput flows, it is best to use one cpu
running the user thread issuing socket system calls,
and a separate cpu to process incoming packets from BH context.
(With TSO/GRO, bottleneck is usually the 'user' cpu)
Problem is the user thread can spend a lot of time while holding
the socket lock, forcing BH handler to queue most of incoming
packets in the socket backlog.
Whenever the user thread releases the socket lock, it must first
process all accumulated packets in the backlog, potentially
adding latency spikes. Due to flood mitigation, having too many
packets in the backlog increases chance of unexpected drops.
Backlog processing unfortunately shifts a fair amount of cpu cycles
from the BH cpu to the 'user' cpu, thus reducing max throughput.
This patch takes advantage of the backlog processing,
and the fact that ACK are mostly cumulative.
The idea is to detect we are in the backlog processing
and defer all eligible ACK into a single one,
sent from tcp_release_cb().
This saves cpu cycles on both sides, and network resources.
Performance of a single TCP flow on a 200Gbit NIC:
- Throughput is increased by 20% (100Gbit -> 120Gbit).
- Number of generated ACK per second shrinks from 240,000 to 40,000.
- Number of backlog drops per second shrinks from 230 to 0.
Benchmark context:
- Regular netperf TCP_STREAM (no zerocopy)
- Intel(R) Xeon(R) Platinum 8481C (Saphire Rapids)
- MAX_SKB_FRAGS = 17 (~60KB per GRO packet)
This feature is guarded by a new sysctl, and enabled by default:
/proc/sys/net/ipv4/tcp_backlog_ack_defer
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Dave Taht <dave.taht@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: 87b08913a9ae ("inet: move icmp_global_{credit,stamp} to a separate cache line")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f47c1b77d0a2a9c0d49ec14302e74f933398d1a3 ]
The clk_save_context() and clk_restore_context() helpers are only
implemented by the Common Clock Framework. They are not available when
using legacy clock frameworks. Dummy implementations are provided, but
only if no clock support is available at all.
Hence when CONFIG_HAVE_CLK=y, but CONFIG_COMMON_CLK is not enabled:
m68k-linux-gnu-ld: drivers/net/phy/air_en8811h.o: in function `en8811h_resume':
air_en8811h.c:(.text+0x83e): undefined reference to `clk_restore_context'
m68k-linux-gnu-ld: drivers/net/phy/air_en8811h.o: in function `en8811h_suspend':
air_en8811h.c:(.text+0x856): undefined reference to `clk_save_context'
Fix this by moving forward declarations and dummy implementions from the
HAVE_CLK to the COMMON_CLK section.
Fixes: 8b95d1ce3300c411 ("clk: Add functions to save/restore clock context en-masse")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202511301553.eaEz1nEW-lkp@intel.com/
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a57b1f07d2d35843a7ada30c8cf9a215c0931868 ]
The @data buffer is 5 bytes, not 4, it has been extended for the need of
devices with an extra ID bytes.
Fixes: 34a956739d29 ("mtd: spinand: Add support for 5-byte IDs")
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7b85137caf110a09a4a18f00f730de4709f9afc8 ]
The hibernate resume sequence involves loading a resume kernel that is just
used for loading the hibernate image before shifting back to the existing
kernel.
During that hibernate resume sequence the resume kernel may have loaded
the ccp driver. If this happens the resume kernel will also have called
PSP_CMD_TEE_RING_INIT but it will never have called
PSP_CMD_TEE_RING_DESTROY.
This is problematic because the existing kernel needs to re-initialize the
ring. One could argue that the existing kernel should call destroy
as part of restore() but there is no guarantee that the resume kernel did
or didn't load the ccp driver. There is also no callback opportunity for
the resume kernel to destroy before handing back control to the existing
kernel.
Similar problems could potentially exist with the use of kdump and
crash handling. I actually reproduced this issue like this:
1) rmmod ccp
2) hibernate the system
3) resume the system
4) modprobe ccp
The resume kernel will have loaded ccp but never destroyed and then when
I try to modprobe it fails.
Because of these possible cases add a flow that checks the error code from
the PSP_CMD_TEE_RING_INIT call and tries to call PSP_CMD_TEE_RING_DESTROY
if it failed. If this succeeds then call PSP_CMD_TEE_RING_INIT again.
Fixes: f892a21f51162 ("crypto: ccp - use generic power management")
Reported-by: Lars Francke <lars.francke@gmail.com>
Closes: https://lore.kernel.org/platform-driver-x86/CAD-Ua_gfJnQSo8ucS_7ZwzuhoBRJ14zXP7s8b-zX3ZcxcyWePw@mail.gmail.com/
Tested-by: Yijun Shen <Yijun.Shen@Dell.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://patch.msgid.link/20260116041132.153674-6-superm1@kernel.org
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c3f0c02997c7f8489fec259e28e0e04e9811edac ]
Going forward skb_dst_set will assert that skb dst_entry
is empty during skb_dst_set to prevent potential leaks. There
are few places that still manually manage dst_entry not using
the helpers. Convert them to the following new helpers:
- skb_dstref_steal that resets dst_entry and returns previous dst_entry
value
- skb_dstref_restore that restores dst_entry previously reset via
skb_dstref_steal
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250818154032.3173645-2-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 81b84de32bb2 ("xfrm: fix ip_rt_bug race in icmp_route_lookup reverse path")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1e13f27e0675552161ab1778be9a23a636dde8a7 ]
nft_counter_reset() calls u64_stats_add() with a negative value to reset
the counter. This will work on 64bit archs, hence the negative value
added will wrap as a 64bit value which then can wrap the stat counter as
well.
On 32bit archs, the added negative value will wrap as a 32bit value and
_not_ wrapping the stat counter properly. In most cases, this would just
lead to a very large 32bit value being added to the stat counter.
Fix by introducing u64_stats_sub().
Fixes: 4a1d3acd6ea8 ("netfilter: nft_counter: Use u64_stats_t for statistic.")
Signed-off-by: Anders Grahn <anders.grahn@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 071588136007482d70fd2667b827036bc60b1f8f ]
The IPC sysctls implement the ctl_table_root::permissions hook and
they override the file access mode based on the CAP_CHECKPOINT_RESTORE
capability, which is being checked regardless of whether any access is
actually denied or not, so if an LSM denies the capability, an audit
record may be logged even when access is in fact granted.
It wouldn't be viable to restructure the sysctl permission logic to only
check the capability when the access would be actually denied if it's
not granted. Thus, do the same as in net_ctl_permissions()
(net/sysctl_net.c) - switch from ns_capable() to ns_capable_noaudit(),
so that the check never emits an audit record.
Fixes: 0889f44e2810 ("ipc: Check permissions for checkpoint_restart sysctls at open time")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Acked-by: Alexey Gladkov <legion@kernel.org>
Acked-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Serge Hallyn <sergeh@kernel.org>
Stable-dep-of: 8924336531e2 ("ipc: don't audit capability check in ipc_permissions()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e8a1e7eaa19d0b757b06a2f913e3eeb4b1c002c6 ]
__sprint_symbol() might access an invalid pointer when
kallsyms_lookup_buildid() returns a symbol found by
ftrace_mod_address_lookup().
The ftrace lookup function must set both @modname and @modbuildid the same
way as module_address_lookup().
Link: https://lkml.kernel.org/r/20251128135920.217303-7-pmladek@suse.com
Fixes: 9294523e3768 ("module: add printk formats to add module build ID to stacktraces")
Signed-off-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Aaron Tomlin <atomlin@atomlin.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkman <daniel@iogearbox.net>
Cc: Daniel Gomez <da.gomez@samsung.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Luis Chamberalin <mcgrof@kernel.org>
Cc: Marc Rutland <mark.rutland@arm.com>
Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Cc: Petr Pavlu <petr.pavlu@suse.com>
Cc: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit acfdbb4ab2910ff6f03becb569c23ac7b2223913 ]
Add a helper function for reading the optional "build_id" member of struct
module. It is going to be used also in ftrace_mod_address_lookup().
Use "#ifdef" instead of "#if IS_ENABLED()" to match the declaration of the
optional field in struct module.
Link: https://lkml.kernel.org/r/20251128135920.217303-4-pmladek@suse.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Daniel Gomez <da.gomez@samsung.com>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Cc: Aaron Tomlin <atomlin@atomlin.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkman <daniel@iogearbox.net>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Luis Chamberalin <mcgrof@kernel.org>
Cc: Marc Rutland <mark.rutland@arm.com>
Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: e8a1e7eaa19d ("kallsyms/ftrace: set module buildid in ftrace_mod_address_lookup()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 553b4999cbe231b5011cb8db05a3092dec168aca ]
Using a threaded interrupt without a dedicated primary handler mandates
the IRQF_ONESHOT flag to mask the interrupt source while the threaded
handler is active. Otherwise the interrupt can fire again before the
threaded handler had a chance to run.
Mark explained that this should not happen with this hardware since it
is a slow irqchip which is behind an I2C/ SPI bus but the IRQ-core will
refuse to accept such a handler.
Set IRQF_ONESHOT so the interrupt source is masked until the secondary
handler is done.
Fixes: 1c6c69525b40e ("genirq: Reject bogus threaded irq requests")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260128095540.863589-16-bigeasy@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 929e30f9312514902133c45e51c79088421ab084 ]
A socket using sockmap has its own independent receive queue: ingress_msg.
This queue may contain data from its own protocol stack or from other
sockets.
Therefore, for sockmap, relying solely on copied_seq and rcv_nxt to
calculate FIONREAD is not enough.
This patch adds a new msg_tot_len field in the psock structure to record
the data length in ingress_msg. Additionally, we implement new ioctl
interfaces for TCP and UDP to intercept FIONREAD operations.
Note that we intentionally do not include sk_receive_queue data in the
FIONREAD result. Data in sk_receive_queue has not yet been processed by
the BPF verdict program, and may be redirected to other sockets or
dropped. Including it would create semantic ambiguity since this data
may never be readable by the user.
Unix and VSOCK sockets have similar issues, but fixing them is outside
the scope of this patch as it would require more intrusive changes.
Previous work by John Fastabend made some efforts towards FIONREAD support:
commit e5c6de5fa025 ("bpf, sockmap: Incorrectly handling copied_seq")
Although the current patch is based on the previous work by John Fastabend,
it is acceptable for our Fixes tag to point to the same commit.
FD1:read()
-- FD1->copied_seq++
| [read data]
|
[enqueue data] v
[sockmap] -> ingress to self -> ingress_msg queue
FD1 native stack ------> ^
-- FD1->rcv_nxt++ -> redirect to other | [enqueue data]
| |
| ingress to FD1
v ^
... | [sockmap]
FD2 native stack
Fixes: 04919bed948dc ("tcp: Introduce tcp_read_skb()")
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/r/20260124113314.113584-3-jiayuan.chen@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b40cc5adaa80e1471095a62d78233b611d7a558c ]
A socket using sockmap has its own independent receive queue: ingress_msg.
This queue may contain data from its own protocol stack or from other
sockets.
The issue is that when reading from ingress_msg, we update tp->copied_seq
by default. However, if the data is not from its own protocol stack,
tcp->rcv_nxt is not increased. Later, if we convert this socket to a
native socket, reading from this socket may fail because copied_seq might
be significantly larger than rcv_nxt.
This fix also addresses the syzkaller-reported bug referenced in the
Closes tag.
This patch marks the skmsg objects in ingress_msg. When reading, we update
copied_seq only if the data is from its own protocol stack.
FD1:read()
-- FD1->copied_seq++
| [read data]
|
[enqueue data] v
[sockmap] -> ingress to self -> ingress_msg queue
FD1 native stack ------> ^
-- FD1->rcv_nxt++ -> redirect to other | [enqueue data]
| |
| ingress to FD1
v ^
... | [sockmap]
FD2 native stack
Closes: https://syzkaller.appspot.com/bug?extid=06dbd397158ec0ea4983
Fixes: 04919bed948dc ("tcp: Introduce tcp_read_skb()")
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Link: https://lore.kernel.org/r/20260124113314.113584-2-jiayuan.chen@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 76489955c6d4a065ca69dc88faf7a50a59b66f35 ]
The comapt_xxx_class symbols aren't declared in anything that
lib/comapt_audit.c is including (arm64 build) which is causing
the following sparse warnings:
lib/compat_audit.c:7:10: warning: symbol 'compat_dir_class'
was not declared. Should it be static?
lib/compat_audit.c:12:10: warning: symbol 'compat_read_class'
was not declared. Should it be static?
lib/compat_audit.c:17:10: warning: symbol 'compat_write_class'
was not declared. Should it be static?
lib/compat_audit.c:22:10: warning: symbol 'compat_chattr_class'
was not declared. Should it be static?
lib/compat_audit.c:27:10: warning: symbol 'compat_signal_class'
was not declared. Should it be static?
Trying to fix this by chaning compat_audit.c to inclde <linux/audit.h>
does not work on arm64 due to compile errors with the extra includes
that changing this header makes. The simpler thing would be just to
move the definitons of these symbols out of <linux/audit.h> into
<linux/audit_arch.h> which is included.
Fixes: 4b58841149dca ("audit: Add generic compat syscall support")
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
[PM: rewrite subject line, fixed line length in description]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
mmu_gather
commit 8ce720d5bd91e9dc16db3604aa4b1bf76770a9a1 upstream.
As reported, ever since commit 1013af4f585f ("mm/hugetlb: fix
huge_pmd_unshare() vs GUP-fast race") we can end up in some situations
where we perform so many IPI broadcasts when unsharing hugetlb PMD page
tables that it severely regresses some workloads.
In particular, when we fork()+exit(), or when we munmap() a large
area backed by many shared PMD tables, we perform one IPI broadcast per
unshared PMD table.
There are two optimizations to be had:
(1) When we process (unshare) multiple such PMD tables, such as during
exit(), it is sufficient to send a single IPI broadcast (as long as
we respect locking rules) instead of one per PMD table.
Locking prevents that any of these PMD tables could get reused before
we drop the lock.
(2) When we are not the last sharer (> 2 users including us), there is
no need to send the IPI broadcast. The shared PMD tables cannot
become exclusive (fully unshared) before an IPI will be broadcasted
by the last sharer.
Concurrent GUP-fast could walk into a PMD table just before we
unshared it. It could then succeed in grabbing a page from the
shared page table even after munmap() etc succeeded (and supressed
an IPI). But there is not difference compared to GUP-fast just
sleeping for a while after grabbing the page and re-enabling IRQs.
Most importantly, GUP-fast will never walk into page tables that are
no-longer shared, because the last sharer will issue an IPI
broadcast.
(if ever required, checking whether the PUD changed in GUP-fast
after grabbing the page like we do in the PTE case could handle
this)
So let's rework PMD sharing TLB flushing + IPI sync to use the mmu_gather
infrastructure so we can implement these optimizations and demystify the
code at least a bit. Extend the mmu_gather infrastructure to be able to
deal with our special hugetlb PMD table sharing implementation.
To make initialization of the mmu_gather easier when working on a single
VMA (in particular, when dealing with hugetlb), provide
tlb_gather_mmu_vma().
We'll consolidate the handling for (full) unsharing of PMD tables in
tlb_unshare_pmd_ptdesc() and tlb_flush_unshared_tables(), and track
in "struct mmu_gather" whether we had (full) unsharing of PMD tables.
Because locking is very special (concurrent unsharing+reuse must be
prevented), we disallow deferring flushing to tlb_finish_mmu() and instead
require an explicit earlier call to tlb_flush_unshared_tables().
From hugetlb code, we call huge_pmd_unshare_flush() where we make sure
that the expected lock protecting us from concurrent unsharing+reuse is
still held.
Check with a VM_WARN_ON_ONCE() in tlb_finish_mmu() that
tlb_flush_unshared_tables() was properly called earlier.
Document it all properly.
Notes about tlb_remove_table_sync_one() interaction with unsharing:
There are two fairly tricky things:
(1) tlb_remove_table_sync_one() is a NOP on architectures without
CONFIG_MMU_GATHER_RCU_TABLE_FREE.
Here, the assumption is that the previous TLB flush would send an
IPI to all relevant CPUs. Careful: some architectures like x86 only
send IPIs to all relevant CPUs when tlb->freed_tables is set.
The relevant architectures should be selecting
MMU_GATHER_RCU_TABLE_FREE, but x86 might not do that in stable
kernels and it might have been problematic before this patch.
Also, the arch flushing behavior (independent of IPIs) is different
when tlb->freed_tables is set. Do we have to enlighten them to also
take care of tlb->unshared_tables? So far we didn't care, so
hopefully we are fine. Of course, we could be setting
tlb->freed_tables as well, but that might then unnecessarily flush
too much, because the semantics of tlb->freed_tables are a bit
fuzzy.
This patch changes nothing in this regard.
(2) tlb_remove_table_sync_one() is not a NOP on architectures with
CONFIG_MMU_GATHER_RCU_TABLE_FREE that actually don't need a sync.
Take x86 as an example: in the common case (!pv, !X86_FEATURE_INVLPGB)
we still issue IPIs during TLB flushes and don't actually need the
second tlb_remove_table_sync_one().
This optimized can be implemented on top of this, by checking e.g., in
tlb_remove_table_sync_one() whether we really need IPIs. But as
described in (1), it really must honor tlb->freed_tables then to
send IPIs to all relevant CPUs.
Notes on TLB flushing changes:
(1) Flushing for non-shared PMD tables
We're converting from flush_hugetlb_tlb_range() to
tlb_remove_huge_tlb_entry(). Given that we properly initialize the
MMU gather in tlb_gather_mmu_vma() to be hugetlb aware, similar to
__unmap_hugepage_range(), that should be fine.
(2) Flushing for shared PMD tables
We're converting from various things (flush_hugetlb_tlb_range(),
tlb_flush_pmd_range(), flush_tlb_range()) to tlb_flush_pmd_range().
tlb_flush_pmd_range() achieves the same that
tlb_remove_huge_tlb_entry() would achieve in these scenarios.
Note that tlb_remove_huge_tlb_entry() also calls
__tlb_remove_tlb_entry(), however that is only implemented on
powerpc, which does not support PMD table sharing.
Similar to (1), tlb_gather_mmu_vma() should make sure that TLB
flushing keeps on working as expected.
Further, note that the ptdesc_pmd_pts_dec() in huge_pmd_share() is not a
concern, as we are holding the i_mmap_lock the whole time, preventing
concurrent unsharing. That ptdesc_pmd_pts_dec() usage will be removed
separately as a cleanup later.
There are plenty more cleanups to be had, but they have to wait until
this is fixed.
[david@kernel.org: fix kerneldoc]
Link: https://lkml.kernel.org/r/f223dd74-331c-412d-93fc-69e360a5006c@kernel.org
Link: https://lkml.kernel.org/r/20251223214037.580860-5-david@kernel.org
Fixes: 1013af4f585f ("mm/hugetlb: fix huge_pmd_unshare() vs GUP-fast race")
Signed-off-by: David Hildenbrand (Red Hat) <david@kernel.org>
Reported-by: "Uschakow, Stanislav" <suschako@amazon.de>
Closes: https://lore.kernel.org/all/4d3878531c76479d9f8ca9789dc6485d@amazon.de/
Tested-by: Laurence Oberman <loberman@redhat.com>
Acked-by: Harry Yoo <harry.yoo@oracle.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Lance Yang <lance.yang@linux.dev>
Cc: Liu Shixin <liushixin2@huawei.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Rik van Riel <riel@surriel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Hildenbrand (Arm) <david@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ca1a47cd3f5f4c46ca188b1c9a27af87d1ab2216 upstream.
Patch series "mm/hugetlb: fixes for PMD table sharing (incl. using
mmu_gather)", v3.
One functional fix, one performance regression fix, and two related
comment fixes.
I cleaned up my prototype I recently shared [1] for the performance fix,
deferring most of the cleanups I had in the prototype to a later point.
While doing that I identified the other things.
The goal of this patch set is to be backported to stable trees "fairly"
easily. At least patch #1 and #4.
Patch #1 fixes hugetlb_pmd_shared() not detecting any sharing
Patch #2 + #3 are simple comment fixes that patch #4 interacts with.
Patch #4 is a fix for the reported performance regression due to excessive
IPI broadcasts during fork()+exit().
The last patch is all about TLB flushes, IPIs and mmu_gather.
Read: complicated
There are plenty of cleanups in the future to be had + one reasonable
optimization on x86. But that's all out of scope for this series.
Runtime tested, with a focus on fixing the performance regression using
the original reproducer [2] on x86.
This patch (of 4):
We switched from (wrongly) using the page count to an independent shared
count. Now, shared page tables have a refcount of 1 (excluding
speculative references) and instead use ptdesc->pt_share_count to identify
sharing.
We didn't convert hugetlb_pmd_shared(), so right now, we would never
detect a shared PMD table as such, because sharing/unsharing no longer
touches the refcount of a PMD table.
Page migration, like mbind() or migrate_pages() would allow for migrating
folios mapped into such shared PMD tables, even though the folios are not
exclusive. In smaps we would account them as "private" although they are
"shared", and we would be wrongly setting the PM_MMAP_EXCLUSIVE in the
pagemap interface.
Fix it by properly using ptdesc_pmd_is_shared() in hugetlb_pmd_shared().
Link: https://lkml.kernel.org/r/20251223214037.580860-1-david@kernel.org
Link: https://lkml.kernel.org/r/20251223214037.580860-2-david@kernel.org
Link: https://lore.kernel.org/all/8cab934d-4a56-44aa-b641-bfd7e23bd673@kernel.org/ [1]
Link: https://lore.kernel.org/all/8cab934d-4a56-44aa-b641-bfd7e23bd673@kernel.org/ [2]
Fixes: 59d9094df3d7 ("mm: hugetlb: independent PMD page table shared count")
Signed-off-by: David Hildenbrand (Red Hat) <david@kernel.org>
Reviewed-by: Rik van Riel <riel@surriel.com>
Reviewed-by: Lance Yang <lance.yang@linux.dev>
Tested-by: Lance Yang <lance.yang@linux.dev>
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Tested-by: Laurence Oberman <loberman@redhat.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Oscar Salvador <osalvador@suse.de>
Cc: Liu Shixin <liushixin2@huawei.com>
Cc: "Uschakow, Stanislav" <suschako@amazon.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Hildenbrand (Arm) <david@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 14967a9c7d247841b0312c48dcf8cd29e55a4cc8 upstream.
commit 59d9094df3d79 ("mm: hugetlb: independent PMD page table shared
count") introduced ->pt_share_count dedicated to hugetlb PMD share count
tracking, but omitted fixing copy_hugetlb_page_range(), leaving the
function relying on page_count() for tracking that no longer works.
When lazy page table copy for hugetlb is disabled, that is, revert commit
bcd51a3c679d ("hugetlb: lazy page table copies in fork()") fork()'ing with
hugetlb PMD sharing quickly lockup -
[ 239.446559] watchdog: BUG: soft lockup - CPU#75 stuck for 27s!
[ 239.446611] RIP: 0010:native_queued_spin_lock_slowpath+0x7e/0x2e0
[ 239.446631] Call Trace:
[ 239.446633] <TASK>
[ 239.446636] _raw_spin_lock+0x3f/0x60
[ 239.446639] copy_hugetlb_page_range+0x258/0xb50
[ 239.446645] copy_page_range+0x22b/0x2c0
[ 239.446651] dup_mmap+0x3e2/0x770
[ 239.446654] dup_mm.constprop.0+0x5e/0x230
[ 239.446657] copy_process+0xd17/0x1760
[ 239.446660] kernel_clone+0xc0/0x3e0
[ 239.446661] __do_sys_clone+0x65/0xa0
[ 239.446664] do_syscall_64+0x82/0x930
[ 239.446668] ? count_memcg_events+0xd2/0x190
[ 239.446671] ? syscall_trace_enter+0x14e/0x1f0
[ 239.446676] ? syscall_exit_work+0x118/0x150
[ 239.446677] ? arch_exit_to_user_mode_prepare.constprop.0+0x9/0xb0
[ 239.446681] ? clear_bhb_loop+0x30/0x80
[ 239.446684] ? clear_bhb_loop+0x30/0x80
[ 239.446686] entry_SYSCALL_64_after_hwframe+0x76/0x7e
There are two options to resolve the potential latent issue:
1. warn against PMD sharing in copy_hugetlb_page_range(),
2. fix it.
This patch opts for the second option.
While at it, simplify the comment, the details are not actually relevant
anymore.
Link: https://lkml.kernel.org/r/20250916004520.1604530-1-jane.chu@oracle.com
Fixes: 59d9094df3d7 ("mm: hugetlb: independent PMD page table shared count")
Signed-off-by: Jane Chu <jane.chu@oracle.com>
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Acked-by: Oscar Salvador <osalvador@suse.de>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Liu Shixin <liushixin2@huawei.com>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Hildenbrand (Arm) <david@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 13e00fdc9236bd4d0bff4109d2983171fbcb74c4 ]
This variant of skb_header_pointer() should be used in contexts
where @offset argument is user-controlled and could be negative.
Negative offsets are supported, as long as the zone starts
between skb->head and skb->data.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260128141539.3404400-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: cabd1a976375 ("net/sched: cls_u32: use skb_header_pointer_careful()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a126061c80d5efb4baef4bcf346094139cd81df6 ]
Jakub added a lockdep_assert_no_hardirq() check in __page_pool_put_page()
to increase test coverage.
syzbot found a splat caused by hard irq blocking in
ptr_ring_resize_multiple() [1]
As current users of ptr_ring_resize_multiple() do not require
hard irqs being masked, replace it to only block BH.
Rename helpers to better reflect they are safe against BH only.
- ptr_ring_resize_multiple() to ptr_ring_resize_multiple_bh()
- skb_array_resize_multiple() to skb_array_resize_multiple_bh()
[1]
WARNING: CPU: 1 PID: 9150 at net/core/page_pool.c:709 __page_pool_put_page net/core/page_pool.c:709 [inline]
WARNING: CPU: 1 PID: 9150 at net/core/page_pool.c:709 page_pool_put_unrefed_netmem+0x157/0xa40 net/core/page_pool.c:780
Modules linked in:
CPU: 1 UID: 0 PID: 9150 Comm: syz.1.1052 Not tainted 6.11.0-rc3-syzkaller-00202-gf8669d7b5f5d #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024
RIP: 0010:__page_pool_put_page net/core/page_pool.c:709 [inline]
RIP: 0010:page_pool_put_unrefed_netmem+0x157/0xa40 net/core/page_pool.c:780
Code: 74 0e e8 7c aa fb f7 eb 43 e8 75 aa fb f7 eb 3c 65 8b 1d 38 a8 6a 76 31 ff 89 de e8 a3 ae fb f7 85 db 74 0b e8 5a aa fb f7 90 <0f> 0b 90 eb 1d 65 8b 1d 15 a8 6a 76 31 ff 89 de e8 84 ae fb f7 85
RSP: 0018:ffffc9000bda6b58 EFLAGS: 00010083
RAX: ffffffff8997e523 RBX: 0000000000000000 RCX: 0000000000040000
RDX: ffffc9000fbd0000 RSI: 0000000000001842 RDI: 0000000000001843
RBP: 0000000000000000 R08: ffffffff8997df2c R09: 1ffffd40003a000d
R10: dffffc0000000000 R11: fffff940003a000e R12: ffffea0001d00040
R13: ffff88802e8a4000 R14: dffffc0000000000 R15: 00000000ffffffff
FS: 00007fb7aaf716c0(0000) GS:ffff8880b9300000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fa15a0d4b72 CR3: 00000000561b0000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
tun_ptr_free drivers/net/tun.c:617 [inline]
__ptr_ring_swap_queue include/linux/ptr_ring.h:571 [inline]
ptr_ring_resize_multiple_noprof include/linux/ptr_ring.h:643 [inline]
tun_queue_resize drivers/net/tun.c:3694 [inline]
tun_device_event+0xaaf/0x1080 drivers/net/tun.c:3714
notifier_call_chain+0x19f/0x3e0 kernel/notifier.c:93
call_netdevice_notifiers_extack net/core/dev.c:2032 [inline]
call_netdevice_notifiers net/core/dev.c:2046 [inline]
dev_change_tx_queue_len+0x158/0x2a0 net/core/dev.c:9024
do_setlink+0xff6/0x41f0 net/core/rtnetlink.c:2923
rtnl_setlink+0x40d/0x5a0 net/core/rtnetlink.c:3201
rtnetlink_rcv_msg+0x73f/0xcf0 net/core/rtnetlink.c:6647
netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2550
Fixes: ff4e538c8c3e ("page_pool: add a lockdep check for recycling in hardirq")
Reported-by: syzbot+f56a5c5eac2b28439810@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/671e10df.050a0220.2b8c0f.01cf.GAE@google.com/T/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://patch.msgid.link/20241217135121.326370-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ 2c321f3f70bc ("mm: change inlined allocation helpers to account at the call site")
is not ported to Linux-6.6.y. So remove the suffix "_noprof". ]
Signed-off-by: Alva Lan <alvalan9@foxmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 76ed27608f7dd235b727ebbb12163438c2fbb617 ]
In order to do a user space stacktrace the current task needs to be a user
task that has executed in user space. It use to be possible to test if a
task is a user task or not by simply checking the task_struct mm field. If
it was non NULL, it was a user task and if not it was a kernel task.
But things have changed over time, and some kernel tasks now have their
own mm field.
An idea was made to instead test PF_KTHREAD and two functions were used to
wrap this check in case it became more complex to test if a task was a
user task or not[1]. But this was rejected and the C code simply checked
the PF_KTHREAD directly.
It was later found that not all kernel threads set PF_KTHREAD. The io-uring
helpers instead set PF_USER_WORKER and this needed to be added as well.
But checking the flags is still not enough. There's a very small window
when a task exits that it frees its mm field and it is set back to NULL.
If perf were to trigger at this moment, the flags test would say its a
user space task but when perf would read the mm field it would crash with
at NULL pointer dereference.
Now there are flags that can be used to test if a task is exiting, but
they are set in areas that perf may still want to profile the user space
task (to see where it exited). The only real test is to check both the
flags and the mm field.
Instead of making this modification in every location, create a new
is_user_task() helper function that does all the tests needed to know if
it is safe to read the user space memory or not.
[1] https://lore.kernel.org/all/20250425204120.639530125@goodmis.org/
Fixes: 90942f9fac05 ("perf: Use current->flags & PF_KTHREAD|PF_USER_WORKER instead of current->mm == NULL")
Closes: https://lore.kernel.org/all/0d877e6f-41a7-4724-875d-0b0a27b8a545@roeck-us.net/
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260129102821.46484722@gandalf.local.home
[ Adjust context ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 210b1f6576e8b367907e7ff51ef425062e1468e4 ]
Scheduling reset_work after a nvme subsystem reset is expected to fail
on pcie, but this also prevents potential handling the platform's pcie
services may provide that might successfully recovering the link without
re-enumeration. Such examples include AER, DPC, and power's EEH.
Provide a pci specific operation that safely initiates a subsystem
reset, and instead of scheduling reset work, read back the status
register to trigger a pcie read error.
Since this only affects pci, the other fabrics drivers subscribe to a
generic nvmf subsystem reset that is exactly the same as before. The
loop fabric doesn't use it because nvmet doesn't support setting that
property anyway.
And since we're using the magic NSSR value in two places now, provide a
symbolic define for it.
Reported-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Stable-dep-of: 0edb475ac0a7 ("nvme: fix PCIe subsystem reset controller state transition")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 9910159f06590c17df4fbddedaabb4c0201cc4cb ]
When one iio device is a consumer of another, it is possible that
the ->info_exist_lock of both ends up being taken when reading the
value of the consumer device.
Since they currently belong to the same lockdep class (being
initialized in a single location with mutex_init()), that results in a
lockdep warning
CPU0
----
lock(&iio_dev_opaque->info_exist_lock);
lock(&iio_dev_opaque->info_exist_lock);
*** DEADLOCK ***
May be due to missing lock nesting notation
4 locks held by sensors/414:
#0: c31fd6dc (&p->lock){+.+.}-{3:3}, at: seq_read_iter+0x44/0x4e4
#1: c4f5a1c4 (&of->mutex){+.+.}-{3:3}, at: kernfs_seq_start+0x1c/0xac
#2: c2827548 (kn->active#34){.+.+}-{0:0}, at: kernfs_seq_start+0x30/0xac
#3: c1dd2b68 (&iio_dev_opaque->info_exist_lock){+.+.}-{3:3}, at: iio_read_channel_processed_scale+0x24/0xd8
stack backtrace:
CPU: 0 UID: 0 PID: 414 Comm: sensors Not tainted 6.17.11 #5 NONE
Hardware name: Generic AM33XX (Flattened Device Tree)
Call trace:
unwind_backtrace from show_stack+0x10/0x14
show_stack from dump_stack_lvl+0x44/0x60
dump_stack_lvl from print_deadlock_bug+0x2b8/0x334
print_deadlock_bug from __lock_acquire+0x13a4/0x2ab0
__lock_acquire from lock_acquire+0xd0/0x2c0
lock_acquire from __mutex_lock+0xa0/0xe8c
__mutex_lock from mutex_lock_nested+0x1c/0x24
mutex_lock_nested from iio_read_channel_raw+0x20/0x6c
iio_read_channel_raw from rescale_read_raw+0x128/0x1c4
rescale_read_raw from iio_channel_read+0xe4/0xf4
iio_channel_read from iio_read_channel_processed_scale+0x6c/0xd8
iio_read_channel_processed_scale from iio_hwmon_read_val+0x68/0xbc
iio_hwmon_read_val from dev_attr_show+0x18/0x48
dev_attr_show from sysfs_kf_seq_show+0x80/0x110
sysfs_kf_seq_show from seq_read_iter+0xdc/0x4e4
seq_read_iter from vfs_read+0x238/0x2e4
vfs_read from ksys_read+0x6c/0xec
ksys_read from ret_fast_syscall+0x0/0x1c
Just as the mlock_key already has its own lockdep class, add a
lock_class_key for the info_exist mutex.
Note that this has in theory been a problem since before IIO first
left staging, but it only occurs when a chain of consumers is in use
and that is not often done.
Fixes: ac917a81117c ("staging:iio:core set the iio_dev.info pointer to null on unregister under lock.")
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Reviewed-by: Peter Rosin <peda@axentia.se>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit e859d375d1694488015e6804bfeea527a0b25b9f ]
File descriptor based pc_clock_*() operations of dynamic posix clocks
have access to the file pointer and implement permission checks in the
generic code before invoking the relevant dynamic clock callback.
Character device operations (open, read, poll, ioctl) do not implement a
generic permission control and the dynamic clock callbacks have no
access to the file pointer to implement them.
Extend struct posix_clock_context with a struct file pointer and
initialize it in posix_clock_open(), so that all dynamic clock callbacks
can access it.
Acked-by: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Wojtek Wasko <wwasko@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 60c6946675fc06dd2fd2b7a4b6fd1c1f046f1056 ]
Add the necessary structure to support custom private-data per
posix-clock user.
The previous implementation of posix-clock assumed all file open
instances need access to the same clock structure on private_data.
The need for individual data structures per file open instance has been
identified when developing support for multiple timestamp event queue
users for ptp_clock.
Signed-off-by: Xabier Marquiegui <reibax@gmail.com>
Suggested-by: Richard Cochran <richardcochran@gmail.com>
Suggested-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: e859d375d169 ("posix-clock: Store file pointer in struct posix_clock_context")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 2740ac33c87b3d0dfa022efd6ba04c6261b1abbd upstream.
Add USB_QUIRK_NO_BOS quirk flag to skip requesting the BOS descriptor
for devices that cannot handle it.
Add Elgato 4K X (0fd9:009b) to the quirk table. This device hangs when
the BOS descriptor is requested at SuperSpeed Plus (10Gbps).
Link: https://bugzilla.kernel.org/show_bug.cgi?id=220027
Cc: stable <stable@kernel.org>
Signed-off-by: Johannes Brüderl <johannes.bruederl@gmail.com>
Link: https://patch.msgid.link/20251207090220.14807-1-johannes.bruederl@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 6cfab50e1440fde19af7c614aacd85e11aa4dcea ]
Sphinx reports kernel-doc warning:
WARNING: ./include/linux/kfence.h:220 function parameter 'slab' not described in '__kfence_obj_info'
Fix it by describing @slab parameter.
Link: https://lkml.kernel.org/r/20251219014006.16328-6-bagasdotme@gmail.com
Fixes: 2dfe63e61cc3 ("mm, kfence: support kmem_dump_obj() for KFENCE objects")
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Acked-by: Marco Elver <elver@google.com>
Acked-by: David Hildenbrand (Red Hat) <david@kernel.org>
Acked-by: Harry Yoo <harry.yoo@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f26528478bb102c28e7ac0cbfc8ec8185afdafc7 ]
Sphinx reports kernel-doc warning:
WARNING: ./include/linux/textsearch.h:49 struct member 'list' not described in 'ts_ops'
Describe @list member to fix it.
Link: https://lkml.kernel.org/r/20251219014006.16328-4-bagasdotme@gmail.com
Fixes: 2de4ff7bd658 ("[LIB]: Textsearch infrastructure.")
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Cc: Thomas Graf <tgraf@suug.ch>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4806ded4c14c5e8fdc6ce885d83221a78c06a428 ]
Common nfs_stat_to_errno() is used by both fs/nfs/nfs2xdr.c and
fs/nfs/nfs3xdr.c
Will also be used by fs/nfsd/localio.c
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Stable-dep-of: c6c209ceb87f ("NFSD: Remove NFSERR_EAGAIN")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 02d1e1a3f9239cdb3ecf2c6d365fb959d1bf39df ]
Directly increment the TSO features incurs a side effect: it will also
directly clear the flags in NETIF_F_ALL_FOR_ALL on the master device,
which can cause issues such as the inability to enable the nocache copy
feature on the bonding driver.
The fix is to include NETIF_F_ALL_FOR_ALL in the update mask, thereby
preventing it from being cleared.
Fixes: b0ce3508b25e ("bonding: allow TSO being set on bonding master")
Signed-off-by: Di Zhu <zhud@hygon.cn>
Link: https://patch.msgid.link/20251224012224.56185-1-zhud@hygon.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 6241b49540a65a6d5274fa938fd3eb4cbfe2e076 upstream.
The commit below added a new helper, but omitted to move (and add) the
corressponding kernel-doc. Do it now.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Fixes: 2b5eac0f8c6e ("tty: introduce and use tty_port_tty_vhangup() helper")
Link: https://lore.kernel.org/all/b23d566c-09dc-7374-cc87-0ad4660e8b2e@linux.intel.com/
Reported-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Link: https://lore.kernel.org/r/20250624080641.509959-6-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 33cf66d88306663d16e4759e9d24766b0aaa2e17 upstream.
Add a randomized algorithm that runs newidle balancing proportional to
its success rate.
This improves schbench significantly:
6.18-rc4: 2.22 Mrps/s
6.18-rc4+revert: 2.04 Mrps/s
6.18-rc4+revert+random: 2.18 Mrps/S
Conversely, per Adam Li this affects SpecJBB slightly, reducing it by 1%:
6.17: -6%
6.17+revert: 0%
6.17+revert+random: -1%
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Chris Mason <clm@meta.com>
Link: https://lkml.kernel.org/r/6825c50d-7fa7-45d8-9b81-c6e7e25738e2@meta.com
Link: https://patch.msgid.link/20251107161739.770122091@infradead.org
[ Ajay: Modified to apply on v6.6 ]
Signed-off-by: Ajay Kaher <ajay.kaher@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 15504b1163007bbfbd9a63460d5c14737c16e96d ]
Let's move the removal of the page from the balloon list into the single
caller, to remove the dependency on the PG_isolated flag and clarify
locking requirements.
Note that for now, balloon_page_delete() was used on two paths:
(1) Removing a page from the balloon for deflation through
balloon_page_list_dequeue()
(2) Removing an isolated page from the balloon for migration in the
per-driver migration handlers. Isolated pages were already removed from
the balloon list during isolation.
So instead of relying on the flag, we can just distinguish both cases
directly and handle it accordingly in the caller.
We'll shuffle the operations a bit such that they logically make more
sense (e.g., remove from the list before clearing flags).
In balloon migration functions we can now move the balloon_page_finalize()
out of the balloon lock and perform the finalization just before dropping
the balloon reference.
Document that the page lock is currently required when modifying the
movability aspects of a page; hopefully we can soon decouple this from the
page lock.
Link: https://lkml.kernel.org/r/20250704102524.326966-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: Byungchul Park <byungchul@sk.com>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Eugenio Pé rez <eperezma@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Gregory Price <gourry@gourry.net>
Cc: Harry Yoo <harry.yoo@oracle.com>
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jerrin Shaji George <jerrin.shaji-george@broadcom.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Joshua Hahn <joshua.hahnjy@gmail.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mathew Brost <matthew.brost@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Peter Xu <peterx@redhat.com>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: xu xin <xu.xin16@zte.com.cn>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: 0da2ba35c0d5 ("powerpc/pseries/cmm: adjust BALLOON_MIGRATE when migrating pages")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ed3ba9b6e280e14cc3148c1b226ba453f02fa76c upstream.
SIOCBRDELIF is passed to dev_ioctl() first and later forwarded to
br_ioctl_call(), which causes unnecessary RTNL dance and the splat
below [0] under RTNL pressure.
Let's say Thread A is trying to detach a device from a bridge and
Thread B is trying to remove the bridge.
In dev_ioctl(), Thread A bumps the bridge device's refcnt by
netdev_hold() and releases RTNL because the following br_ioctl_call()
also re-acquires RTNL.
In the race window, Thread B could acquire RTNL and try to remove
the bridge device. Then, rtnl_unlock() by Thread B will release RTNL
and wait for netdev_put() by Thread A.
Thread A, however, must hold RTNL after the unlock in dev_ifsioc(),
which may take long under RTNL pressure, resulting in the splat by
Thread B.
Thread A (SIOCBRDELIF) Thread B (SIOCBRDELBR)
---------------------- ----------------------
sock_ioctl sock_ioctl
`- sock_do_ioctl `- br_ioctl_call
`- dev_ioctl `- br_ioctl_stub
|- rtnl_lock |
|- dev_ifsioc '
' |- dev = __dev_get_by_name(...)
|- netdev_hold(dev, ...) .
/ |- rtnl_unlock ------. |
| |- br_ioctl_call `---> |- rtnl_lock
Race | | `- br_ioctl_stub |- br_del_bridge
Window | | | |- dev = __dev_get_by_name(...)
| | | May take long | `- br_dev_delete(dev, ...)
| | | under RTNL pressure | `- unregister_netdevice_queue(dev, ...)
| | | | `- rtnl_unlock
\ | |- rtnl_lock <-' `- netdev_run_todo
| |- ... `- netdev_run_todo
| `- rtnl_unlock |- __rtnl_unlock
| |- netdev_wait_allrefs_any
|- netdev_put(dev, ...) <----------------'
Wait refcnt decrement
and log splat below
To avoid blocking SIOCBRDELBR unnecessarily, let's not call
dev_ioctl() for SIOCBRADDIF and SIOCBRDELIF.
In the dev_ioctl() path, we do the following:
1. Copy struct ifreq by get_user_ifreq in sock_do_ioctl()
2. Check CAP_NET_ADMIN in dev_ioctl()
3. Call dev_load() in dev_ioctl()
4. Fetch the master dev from ifr.ifr_name in dev_ifsioc()
3. can be done by request_module() in br_ioctl_call(), so we move
1., 2., and 4. to br_ioctl_stub().
Note that 2. is also checked later in add_del_if(), but it's better
performed before RTNL.
SIOCBRADDIF and SIOCBRDELIF have been processed in dev_ioctl() since
the pre-git era, and there seems to be no specific reason to process
them there.
[0]:
unregister_netdevice: waiting for wpan3 to become free. Usage count = 2
ref_tracker: wpan3@ffff8880662d8608 has 1/1 users at
__netdev_tracker_alloc include/linux/netdevice.h:4282 [inline]
netdev_hold include/linux/netdevice.h:4311 [inline]
dev_ifsioc+0xc6a/0x1160 net/core/dev_ioctl.c:624
dev_ioctl+0x255/0x10c0 net/core/dev_ioctl.c:826
sock_do_ioctl+0x1ca/0x260 net/socket.c:1213
sock_ioctl+0x23a/0x6c0 net/socket.c:1318
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:906 [inline]
__se_sys_ioctl fs/ioctl.c:892 [inline]
__x64_sys_ioctl+0x1a4/0x210 fs/ioctl.c:892
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcb/0x250 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Fixes: 893b19587534 ("net: bridge: fix ioctl locking")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Reported-by: yan kang <kangyan91@outlook.com>
Reported-by: yue sun <samsun1006219@gmail.com>
Closes: https://lore.kernel.org/netdev/SY8P300MB0421225D54EB92762AE8F0F2A1D32@SY8P300MB0421.AUSP300.PROD.OUTLOOK.COM/
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20250316192851.19781-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
[cascardo: fixed conflict at dev_ifsioc]
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 2b5eac0f8c6e79bc152c8804f9f88d16717013ab ]
This code (tty_get -> vhangup -> tty_put) is repeated on few places.
Introduce a helper similar to tty_port_tty_hangup() (asynchronous) to
handle even vhangup (synchronous).
And use it on those places.
In fact, reuse the tty_port_tty_hangup()'s code and call tty_vhangup()
depending on a new bool parameter.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Cc: Karsten Keil <isdn@linux-pingi.de>
Cc: David Lin <dtwlin@gmail.com>
Cc: Johan Hovold <johan@kernel.org>
Cc: Alex Elder <elder@kernel.org>
Cc: Oliver Neukum <oneukum@suse.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20250611100319.186924-2-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 74098cc06e75 ("xhci: dbgtty: fix device unregister: fixup")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit f183663901f21fe0fba8bd31ae894bc529709ee0 ]
Currently, folio_expected_ref_count() only adds references for the swap
cache if the folio is anonymous. However, according to the comment above
the definition of PG_swapcache in enum pageflags, shmem folios can also
have PG_swapcache set. This patch makes sure references for the swap
cache are added if folio_test_swapcache(folio) is true.
This issue was found when trying to hot-unplug memory in a QEMU/KVM
virtual machine. When initiating hot-unplug when most of the guest memory
is allocated, hot-unplug hangs partway through removal due to migration
failures. The following message would be printed several times, and would
be printed again about every five seconds:
[ 49.641309] migrating pfn b12f25 failed ret:7
[ 49.641310] page: refcount:2 mapcount:0 mapping:0000000033bd8fe2 index:0x7f404d925 pfn:0xb12f25
[ 49.641311] aops:swap_aops
[ 49.641313] flags: 0x300000000030508(uptodate|active|owner_priv_1|reclaim|swapbacked|node=0|zone=3)
[ 49.641314] raw: 0300000000030508 ffffed312c4bc908 ffffed312c4bc9c8 0000000000000000
[ 49.641315] raw: 00000007f404d925 00000000000c823b 00000002ffffffff 0000000000000000
[ 49.641315] page dumped because: migration failure
When debugging this, I found that these migration failures were due to
__migrate_folio() returning -EAGAIN for a small set of folios because the
expected reference count it calculates via folio_expected_ref_count() is
one less than the actual reference count of the folios. Furthermore, all
of the affected folios were not anonymous, but had the PG_swapcache flag
set, inspiring this patch. After applying this patch, the memory
hot-unplug behaves as expected.
I tested this on a machine running Ubuntu 24.04 with kernel version
6.8.0-90-generic and 64GB of memory. The guest VM is managed by libvirt
and runs Ubuntu 24.04 with kernel version 6.18 (though the head of the
mm-unstable branch as a Dec 16, 2025 was also tested and behaves the same)
and 48GB of memory. The libvirt XML definition for the VM can be found at
[1]. CONFIG_MHP_DEFAULT_ONLINE_TYPE_ONLINE_MOVABLE is set in the guest
kernel so the hot-pluggable memory is automatically onlined.
Below are the steps to reproduce this behavior:
1) Define and start and virtual machine
host$ virsh -c qemu:///system define ./test_vm.xml # test_vm.xml from [1]
host$ virsh -c qemu:///system start test_vm
2) Setup swap in the guest
guest$ sudo fallocate -l 32G /swapfile
guest$ sudo chmod 0600 /swapfile
guest$ sudo mkswap /swapfile
guest$ sudo swapon /swapfile
3) Use alloc_data [2] to allocate most of the remaining guest memory
guest$ ./alloc_data 45
4) In a separate guest terminal, monitor the amount of used memory
guest$ watch -n1 free -h
5) When alloc_data has finished allocating, initiate the memory
hot-unplug using the provided xml file [3]
host$ virsh -c qemu:///system detach-device test_vm ./remove.xml --live
After initiating the memory hot-unplug, you should see the amount of
available memory in the guest decrease, and the amount of used swap data
increase. If everything works as expected, when all of the memory is
unplugged, there should be around 8.5-9GB of data in swap. If the
unplugging is unsuccessful, the amount of used swap data will settle below
that. If that happens, you should be able to see log messages in dmesg
similar to the one posted above.
Link: https://lkml.kernel.org/r/20251216200727.2360228-1-bijan311@gmail.com
Link: https://github.com/BijanT/linux_patch_files/blob/main/test_vm.xml [1]
Link: https://github.com/BijanT/linux_patch_files/blob/main/alloc_data.c [2]
Link: https://github.com/BijanT/linux_patch_files/blob/main/remove.xml [3]
Fixes: 86ebd50224c0 ("mm: add folio_expected_ref_count() for reference count calculation")
Signed-off-by: Bijan Tabatabai <bijan311@gmail.com>
Acked-by: David Hildenbrand (Red Hat) <david@kernel.org>
Acked-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Shivank Garg <shivankg@amd.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Kairui Song <ryncsn@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 78cb1a13c42a6d843e21389f74d1edb90ed07288 ]
Now that PAGE_MAPPING_MOVABLE is gone, we can simplify and rely on the
folio_test_anon() test only.
... but staring at the users, this function should never even have been
called on movable_ops pages. E.g.,
* __buffer_migrate_folio() does not make sense for them
* folio_migrate_mapping() does not make sense for them
* migrate_huge_page_move_mapping() does not make sense for them
* __migrate_folio() does not make sense for them
* ... and khugepaged should never stumble over them
Let's simply refuse typed pages (which includes slab) except hugetlb, and
WARN.
Link: https://lkml.kernel.org/r/20250704102524.326966-26-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: Byungchul Park <byungchul@sk.com>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Eugenio Pé rez <eperezma@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Gregory Price <gourry@gourry.net>
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jerrin Shaji George <jerrin.shaji-george@broadcom.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Joshua Hahn <joshua.hahnjy@gmail.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mathew Brost <matthew.brost@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Peter Xu <peterx@redhat.com>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: xu xin <xu.xin16@zte.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: f183663901f2 ("mm: consider non-anon swap cache folios in folio_expected_ref_count()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit faf07e611dfa464b201223a7253e9dc5ee0f3c9e upstream.
tpm2_get_pcr_allocation() does not cap any upper limit for the number of
banks. Cap the limit to eight banks so that out of bounds values coming
from external I/O cause on only limited harm.
Cc: stable@vger.kernel.org # v5.10+
Fixes: bcfff8384f6c ("tpm: dynamically allocate the allocated_banks array")
Tested-by: Lai Yi <yi1.lai@linux.intel.com>
Reviewed-by: Jonathan McDowell <noodles@meta.com>
Reviewed-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@opinsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6f13db031e27e88213381039032a9cc061578ea6 upstream.
A KASAN tag mismatch, possibly causing a kernel panic, can be observed
on systems with a tag-based KASAN enabled and with multiple NUMA nodes.
It was reported on arm64 and reproduced on x86. It can be explained in
the following points:
1. There can be more than one virtual memory chunk.
2. Chunk's base address has a tag.
3. The base address points at the first chunk and thus inherits
the tag of the first chunk.
4. The subsequent chunks will be accessed with the tag from the
first chunk.
5. Thus, the subsequent chunks need to have their tag set to
match that of the first chunk.
Refactor code by reusing __kasan_unpoison_vmalloc in a new helper in
preparation for the actual fix.
Link: https://lkml.kernel.org/r/eb61d93b907e262eefcaa130261a08bcb6c5ce51.1764874575.git.m.wieczorretman@pm.me
Fixes: 1d96320f8d53 ("kasan, vmalloc: add vmalloc tagging for SW_TAGS")
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Jiayuan Chen <jiayuan.chen@linux.dev>
Cc: Kees Cook <kees@kernel.org>
Cc: Marco Elver <elver@google.com>
Cc: "Uladzislau Rezki (Sony)" <urezki@gmail.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: <stable@vger.kernel.org> [6.1+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2fb6915fa22dc5524d704afba58a13305dd9f533 upstream.
"auto" was defined as a keyword back in the K&R days, but as a storage
type specifier. No one ever used it, since it was and is the default
storage type for local variables.
C++11 recycled the keyword to allow a type to be declared based on the
type of an initializer. This was finally adopted into standard C in
C23.
gcc and clang provide the "__auto_type" alias keyword as an extension
for pre-C23, however, there is no reason to pollute the bulk of the
source base with this temporary keyword; instead define "auto" as a
macro unless the compiler is running in C23+ mode.
This macro is added in <linux/compiler_types.h> because that header is
included in some of the tools headers, wheres <linux/compiler.h> is
not as it has a bunch of very kernel-specific things in it.
[ Cc: stable to reduce potential backporting burden. ]
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Cc: <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 5393802c94e0ab1295c04c94c57bcb00222d4674 ]
WARNING: include/linux/genalloc.h:52 function parameter 'start_addr' not described in 'genpool_algo_t'
Fixes: 52fbf1134d47 ("lib/genalloc.c: fix allocation of aligned buffer from non-aligned chunk")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lkml.kernel.org/r/20251127130624.563597e3@canb.auug.org.au
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Alexey Skidanov <alexey.skidanov@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 524c3853831cf4f7e1db579e487c757c3065165c upstream.
syzbot is reporting possibility of deadlock due to sharing lock_class_key
for jbd2_handle across ext4 and ocfs2. But this is a false positive, for
one disk partition can't have two filesystems at the same time.
Reported-by: syzbot+6e493c165d26d6fcbf72@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=6e493c165d26d6fcbf72
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: syzbot+6e493c165d26d6fcbf72@syzkaller.appspotmail.com
Reviewed-by: Jan Kara <jack@suse.cz>
Message-ID: <987110fc-5470-457a-a218-d286a09dd82f@I-love.SAKURA.ne.jp>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit f3d8b64ee46c9b4b0b82b1a4642027728bac95b8 ]
RESET_CONTROL_FLAGS_BIT_* macros use BIT(), but reset.h does not
include bits.h. This causes compilation errors when including
reset.h standalone.
Include bits.h to make reset.h self-contained.
Suggested-by: Troy Mitchell <troy.mitchell@linux.dev>
Reviewed-by: Troy Mitchell <troy.mitchell@linux.dev>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Encrow Thorne <jyc0019@gmail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 96b010536ee020e716d28d9b359a4bcd18800aeb ]
Up to UEFI spec 2.9, the type byte of CPER struct for ARM processor
was defined simply as:
Type at byte offset 4:
- Cache error
- TLB Error
- Bus Error
- Micro-architectural Error
All other values are reserved
Yet, there was no information about how this would be encoded.
Spec 2.9A errata corrected it by defining:
- Bit 1 - Cache Error
- Bit 2 - TLB Error
- Bit 3 - Bus Error
- Bit 4 - Micro-architectural Error
All other values are reserved
That actually aligns with the values already defined on older
versions at N.2.4.1. Generic Processor Error Section.
Spec 2.10 also preserve the same encoding as 2.9A.
Adjust CPER and GHES handling code for both generic and ARM
processors to properly handle UEFI 2.9A and 2.10 encoding.
Link: https://uefi.org/specs/UEFI/2.10/Apx_N_Common_Platform_Error_Record.html#arm-processor-error-information
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a976d790f49499ccaa0f991788ad8ebf92e7fd5c ]
Add a helper function to print a string with names associated
to each bit field.
A typical example is:
const char * const bits[] = {
"bit 3 name",
"bit 4 name",
"bit 5 name",
};
char str[120];
unsigned int bitmask = BIT(3) | BIT(5);
#define MASK GENMASK(5,3)
cper_bits_to_str(str, sizeof(str), FIELD_GET(MASK, bitmask),
bits, ARRAY_SIZE(bits));
The above code fills string "str" with "bit 3 name|bit 5 name".
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8a32282175c964eb15638e8dfe199fc13c060f67 ]
REQ_OP_ZONE_RESET_ALL is a zone management request, and op_is_zone_mgmt()
has returned true for it.
Update the comment to remove the misleading exception note so
the documentation matches the implementation.
Fixes: 12a1c9353c47 ("block: fix op_is_zone_mgmt() to handle REQ_OP_ZONE_RESET_ALL")
Signed-off-by: shechenglong <shechenglong@xfusion.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
