| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Introduce usb_endpoint_is_hs_isoc_double() tell whether an endpoint
conforms to USB 2.0 Isochronous Double IN Bandwidth ECN.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250820143824.551777-7-sakari.ailus@linux.intel.com
|
|
Add usb_endpoint_max_periodic_payload() to obtain maximum payload bytes in
a service interval for isochronous and interrupt endpoints in a USB
version independent way.
Signed-off-by: Rai, Amardeep <amardeep.rai@intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Co-developed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250820143824.551777-5-sakari.ailus@linux.intel.com
|
|
Devices with power.no_pm set are not expected to need any power
management at all, so modify device_set_pm_not_required() to set
power.no_callbacks for them too in case runtime PM will be enabled
for any of them (which in principle may be done for convenience if
such a device participates in a dependency chain).
Since device_set_pm_not_required() must be called before device_add()
or it would not have any effect, it can update power.no_callbacks
without locking, unlike pm_runtime_no_callbacks() that can be called
after registering the target device.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: stable <stable@kernel.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/1950054.tdWV9SEqCh@rafael.j.wysocki
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The new version of the hisilicon zip driver supports the hash join
and gather features, as well as the data move feature (UDMA),
including data copying and memory initialization functions.These
features are registered to the uacce subsystem.
Signed-off-by: Zhushuai Yin <yinzhushuai@huawei.com>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Sometimes, the compiler is not clever enough to inline the
rhashtable_lookup() for us, even if the "obj_cmpfn" and "key_len" in
params is const. This can introduce more overhead.
Therefore, use __always_inline for the rhashtable.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Since commit e0b3165ba521 ("cpufreq: add 'freq_table' in struct
cpufreq_policy"), freq_table has been stored in struct cpufreq_policy
instead of being maintained separately.
However, several helpers in freq_table.c still take both policy and
freq_table as parameters, even though policy->freq_table can always be
used. This leads to redundant function arguments and increases the
chance of inconsistencies.
This patch removes the unnecessary freq_table argument from these
functions and updates their callers to only pass policy. This makes
the code simpler, more consistent, and avoids duplication.
Signed-off-by: Zihuan Zhang <zhangzihuan@kylinos.cn>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://patch.msgid.link/20250902073323.48330-1-zhangzihuan@kylinos.cn
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistentcy cannot be addressed without refactoring the API.
system_wq is a per-CPU worqueue, yet nothing in its name tells about that
CPU affinity constraint, which is very often not required by users. Make
it clear by adding a system_percpu_wq.
queue_work() / queue_delayed_work() mod_delayed_work() will now use the
new per-cpu wq: whether the user still stick on the old name a warn will
be printed along a wq redirect to the new one.
This patch add the new system_percpu_wq except for mm, fs and net
subsystem, whom are handled in separated patches.
The old wq will be kept for a few release cylces.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistentcy cannot be addressed without refactoring the API.
system_unbound_wq should be the default workqueue so as not to enforce
locality constraints for random work whenever it's not required.
Adding system_dfl_wq to encourage its use when unbound work should be used.
queue_work() / queue_delayed_work() / mod_delayed_work() will now use the
new unbound wq: whether the user still use the old wq a warn will be
printed along with a wq redirect to the new one.
The old system_unbound_wq will be kept for a few release cycles.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Merge series from Woodrow Douglass <wdouglass@carnegierobotics.com>:
I wrote this driver to read settings and state from the nxp pf530x
regulator. Please consider it for inclusion, any criticism is welcome.
|
|
RISC-V IO Mapping Table (RIMT) is a static ACPI table to communicate
IOMMU information to the OS. The spec is available at [1].
The changes at high level are,
a) Initialize data structures required for IOMMU/device
configuration using the data from RIMT. Provide APIs required
for device configuration.
b) Provide an API for IOMMU drivers to register the
fwnode with RIMT data structures. This API will create a
fwnode for PCIe IOMMU.
[1] - https://github.com/riscv-non-isa/riscv-acpi-rimt
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20250818045807.763922-2-sunilvl@ventanamicro.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
DARTs on t602x SoCs are of the t8110 variant but have an IAS of 42,
which means optional support for an extra page table level.
Refactor the PTE management to support an arbitrary level count, and
then calculate how many levels we need for any given configuration.
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Sven Peter <sven@kernel.org>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Link: https://lore.kernel.org/r/20250821-apple-dart-4levels-v2-2-e39af79daa37@jannau.net
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
Merge skb-meta-dynptr branch into master branch after fixing a compiler
warning. No conflict.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Merge skb-meta-dynptr branch into net branch after fixing a compiler
warning. No conflict.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Kernel Test Robot reported a compiler warning - a null pointer may be
passed to memmove in __bpf_dynptr_{read,write} when building without
networking support.
The warning is correct from a static analysis standpoint, but not actually
reachable. Without CONFIG_NET, creating dynptrs to skb metadata is
impossible since the constructor kfunc is missing.
Silence the false-postive diagnostic message by returning an error pointer
from bpf_skb_meta_pointer stub when CONFIG_NET=n.
Fixes: 6877cd392bae ("bpf: Enable read/write access to skb metadata through a dynptr")
Closes: https://lore.kernel.org/oe-kbuild-all/202508212031.ir9b3B6Q-lkp@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250901-dynptr-skb-meta-no-net-v2-1-ce607fcb6091@cloudflare.com
|
|
Cross-merge networking fixes after downstream PR (net-6.17-rc5).
No conflicts.
Adjacent changes:
include/net/sock.h
c51613fa276f ("net: add sk->sk_drop_counters")
5d6b58c932ec ("net: lockless sock_i_ino()")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 66f793099a63 ("x86/retpoline: Avoid retpolines for built-in __init
functions") disabled retpolines in __init sections (__noinitretpoline)
as a precaution against potential issues with retpolines in early boot,
but it has not been a problem in practice (i.e. see Clang below).
Commit 87358710c1fb ("x86/retpoline: Support retpoline builds with Clang")
narrowed this to only GCC, as Clang doesn't have per-function control
over retpoline emission. As such, Clang has been booting with retpolines
in __init since retpoline support was introduced.
Clang KCFI has been instrumenting __init since CFI was introduced.
With the introduction of KCFI for GCC, KCFI instrumentation with
retpolines disabled means that objtool does not construct .retpoline_sites
section entries for the non-retpoline KCFI calls. At boot, the KCFI
rehashing code, via __apply_fineibt(), misses all __init KCFI calls
(since they are not retpolines), resulting in immediate hash mismatches:
all preambles are rehashed (via .cfi_sites) and none of the __init call
sites are rehashed.
Remove __noinitretpoline since it provides no meaningful utility and
creates problems with CFI. Additionally remove __noretpoline since it
is now unused.
Alternatively, cfi_rand_callers() could walk the .kcfi_traps section which
is exactly the list of KCFI instrumentation sites. But it seems better to
have as few differences in common instruction sequences between compilers
as possible, so better to remove the special handling of retpolines in
__init for GCC.
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250904034656.3670313-6-kees@kernel.org
|
|
Prepare for GCC KCFI support and move the __nocfi attribute from
compiler-clang.h to compiler_types.h. This was already gated by
CONFIG_CFI_CLANG, so this remains safe for non-KCFI GCC builds.
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20250904034656.3670313-1-kees@kernel.org
|
|
Absolute majority of callers are passing the 4th argument equal to
strlen() of the 3rd one.
Drop the v_size argument, add vfs_parse_fs_qstr() for the cases that
want independent length.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Merge OPP (operating performance points) updates for 6.18 from Viresh
Kumar:
"- Add support to find OPP for a set of keys (Krishna Chaitanya Chundru).
- Minor optimization to OPP Rust implementation (Onur Özkan)."
* tag 'opp-updates-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
OPP: Add support to find OPP for a set of keys
rust: opp: use to_result for error handling
|
|
cgroup_subsys::post_attach callback was introduced in commit 5cf1cacb49ae
("cgroup, cpuset: replace cpuset_post_attach_flush() with
cgroup_subsys->post_attach callback") and only cpuset would use this
callback to wait for the mm migration to complete at the end of
__cgroup_procs_write(). Since the previous patch defer the flush operation
until returning to userspace, no one use this callback now. Remove this
callback from cgroup_subsys.
Signed-off-by: Chuyi Zhou <zhouchuyi@bytedance.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, wireless and Bluetooth.
We're reverting the removal of a Sundance driver, a user has appeared.
This makes the PR rather large in terms of LoC.
There's a conspicuous absence of real, user-reported 6.17 issues.
Slightly worried that the summer distracted people from testing.
Previous releases - regressions:
- ax25: properly unshare skbs in ax25_kiss_rcv()
Previous releases - always broken:
- phylink: disable autoneg for interfaces that have no inband, fix
regression on pcs-lynx (NXP LS1088)
- vxlan: fix null-deref when using nexthop objects
- batman-adv: fix OOB read/write in network-coding decode
- icmp: icmp_ndo_send: fix reversing address translation for replies
- tcp: fix socket ref leak in TCP-AO failure handling for IPv6
- mctp:
- mctp_fraq_queue should take ownership of passed skb
- usb: initialise mac header in RX path, avoid WARN
- wifi: mac80211: do not permit 40 MHz EHT operation on 5/6 GHz,
respect device limitations
- wifi: wilc1000: avoid buffer overflow in WID string configuration
- wifi: mt76:
- fix regressions from mt7996 MLO support rework
- fix offchannel handling issues on mt7996
- fix multiple wcid linked list corruption issues
- mt7921: don't disconnect when AP requests switch to a channel
which requires radar detection
- mt7925u: use connac3 tx aggr check in tx complete
- wifi: intel:
- improve validation of ACPI DSM data
- cfg: restore some 1000 series configs
- wifi: ath:
- ath11k: a fix for GTK rekeying
- ath12k: a missed WiFi7 capability (multi-link EMLSR)
- eth: intel:
- ice: fix races in "low latency" firmware interface for Tx timestamps
- idpf: set mac type when adding and removing MAC filters
- i40e: remove racy read access to some debugfs files
Misc:
- Revert "eth: remove the DLink/Sundance (ST201) driver"
- netfilter: conntrack: helper: Replace -EEXIST by -EBUSY, avoid
confusing modprobe"
* tag 'net-6.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (99 commits)
phy: mscc: Stop taking ts_lock for tx_queue and use its own lock
selftest: net: Fix weird setsockopt() in bind_bhash.c.
MAINTAINERS: add Sabrina to TLS maintainers
gve: update MAINTAINERS
ppp: fix memory leak in pad_compress_skb
net: xilinx: axienet: Add error handling for RX metadata pointer retrieval
net: atm: fix memory leak in atm_register_sysfs when device_register fail
netfilter: nf_tables: Introduce NFTA_DEVICE_PREFIX
selftests: netfilter: fix udpclash tool hang
ax25: properly unshare skbs in ax25_kiss_rcv()
mctp: return -ENOPROTOOPT for unknown getsockopt options
net/smc: Remove validation of reserved bits in CLC Decline message
ipv4: Fix NULL vs error pointer check in inet_blackhole_dev_init()
net: thunder_bgx: decrement cleanup index before use
net: thunder_bgx: add a missing of_node_put
net: phylink: move PHY interrupt request to non-fail path
net: lockless sock_i_ino()
tools: ynl-gen: fix nested array counting
wifi: wilc1000: avoid buffer overflow in WID string configuration
wifi: cfg80211: sme: cap SSID length in __cfg80211_connect_result()
...
|
|
An S1G TIM PVB has 3 mandatory encoding modes, that being
block bitmap, single AID and OBL alongside the ability for
each encoding mode to be inverted. Introduce the ability to
parse the 3 encoding formats. The implementation specification
for the encoding formats can be found in IEEE80211-2024 9.4.2.5.
Signed-off-by: Arien Judge <arien.judge@morsemicro.com>
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20250725132221.258217-3-lachlan.hodges@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Some architectures, such as RISC-V, use the ELF e_flags field to encode
ABI-specific information (e.g., ISA extensions, fpu support). Debuggers
like GDB rely on these flags in core dumps to correctly interpret
optional register sets. If the flags are missing or incorrect, GDB may
warn and ignore valid data, for example:
warning: Unexpected size of section '.reg2/213' in core file.
This can prevent access to fpu or other architecture-specific registers
even when they were dumped.
Save the e_flags field during ELF binary loading (in load_elf_binary())
into the mm_struct, and later retrieve it during core dump generation
(in fill_note_info()). Kconfig option CONFIG_ARCH_HAS_ELF_CORE_EFLAGS
is introduced for architectures that require this behaviour.
Signed-off-by: Svetlana Parfenova <svetlana.parfenova@syntacore.com>
Link: https://lore.kernel.org/r/20250901135350.619485-1-svetlana.parfenova@syntacore.com
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
io_uring_cmd_iopoll_done()'s only caller was removed in commit
9ce6c9875f3e ("nvme: always punt polled uring_cmd end_io work to
task_work"). So remove the unused function too.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Link: https://lore.kernel.org/r/20250902013328.1517686-1-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
io_uring_cmd_done() takes the result code for the CQE as a ssize_t ret
argument. However, the CQE res field is a s32 value, as is the argument
to io_req_set_res(). To clarify that only s32 values can be faithfully
represented without truncation, change io_uring_cmd_done()'s ret
argument type to s32.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Link: https://lore.kernel.org/r/20250902012609.1513123-1-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
pci_has_p2pmem() is not used outside of p2pdma.c, and there is no need to
export it for use by modules.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Link: https://patch.msgid.link/d40f3f1decf54c9236bc38b48a6aae612a5c182f.1756900291.git.leon@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Saeed Mahameed says:
====================
mlx5 PSP IFC bits
This PR has a single patch to add mlx5_ifc PSP related capabilities structures
and HW definitions needed for PSP support in mlx5.
Link: https://lore.kernel.org/20250828162953.2707727-1-daniel.zahka@gmail.com
* tag 'mlx5-psp-ifc' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
net/mlx5: Add PSP capabilities structures and bits
====================
Link: https://patch.msgid.link/20250903063050.668442-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs into for-6.18/block
Pull struct block_device getgeo changes from Al.
"switching ->getgeo() from struct block_device to struct gendisk
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>"
* tag 'pull-getgeo' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
block: switch ->getgeo() to struct gendisk
scsi: switch ->bios_param() to passing gendisk
scsi: switch scsi_bios_ptable() and scsi_partsize() to gendisk
|
|
With the introduction of the of_msi_xlate() function, the OF layer
provides an API to map a device ID and retrieve the MSI controller
node the ID is mapped to with a single call.
of_msi_map_id() is currently used to map a deviceID to a specific
MSI controller node; of_msi_xlate() can be used for that purpose
too, there is no need to keep the two functions.
Convert of_msi_map_id() to of_msi_xlate() calls and update the
of_msi_xlate() documentation to describe how the struct device_node
pointer passed in should be set-up to either provide the MSI controller
node target or receive its pointer upon mapping completion.
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Rob Herring <robh@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250805133443.936955-1-lpieralisi@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
b3c869d35b9b ("jiffies: Remove compile time assumptions about
CLOCK_TICK_RATE") removed the last definition of SHIFTED_HZ but left
behind comments about it. Remove the comments as well.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250825203425.796034-1-helgaas@kernel.org
|
|
The call to __iter_div_u64_rem() in vdso_time_update_aux() is a wrapper
around subtraction. It cannot be used to divide large numbers, as that
introduces long, computationally expensive delays. A regular u64 division
is also not possible in the timekeeper update path as it can be too slow.
Instead of splitting the ktime_t offset into into second and subsecond
components during the timekeeper update fast-path, do it together with the
adjustment of tk->offs_aux in the slow-path. Equivalent to the handling of
offs_boot and monotonic_to_boot.
Reuse the storage of monotonic_to_boot for the new field, as it is not used
by auxiliary timekeepers.
Fixes: 380b84e168e5 ("vdso/vsyscall: Update auxiliary clock data in the datapage")
Reported-by: Miroslav Lichvar <mlichvar@redhat.com>
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250825-vdso-auxclock-division-v1-1-a1d32a16a313@linutronix.de
Closes: https://lore.kernel.org/lkml/aKwsNNWsHJg8IKzj@localhost/
|
|
Cypress(Infineon) is not the vendor for this 43752 SDIO WLAN chip, and so
has not officially released any firmware binary for it. It is incorrect to
maintain this WLAN chip with firmware vendor ID as "CYW". So relabel the
chip's firmware Vendor ID as "WCC" as suggested by the maintainer.
Fixes: d2587c57ffd8 ("brcmfmac: add 43752 SDIO ids and initialization")
Fixes: f74f1ec22dc2 ("wifi: brcmfmac: add support for Cypress firmware api")
Signed-off-by: Gokul Sivakumar <gokulkumar.sivakumar@infineon.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20250724101136.6691-1-gokulkumar.sivakumar@infineon.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add related data structures for this new throttle functionality.
Tesed-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
Signed-off-by: Aaron Lu <ziqianlu@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev>
Tested-by: Valentin Schneider <vschneid@redhat.com>
Tested-by: Matteo Martelli <matteo.martelli@codethink.co.uk>
Link: https://lore.kernel.org/r/20250829081120.806-2-ziqianlu@bytedance.com
|
|
Since all these functions are address-taken in SDTL_INIT() and called
indirectly, it doesn't really make sense for them to be inline.
Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
Leon [1] and Vinicius [2] noted a topology_span_sane() warning during
their testing starting from v6.16-rc1. Debug that followed pointed to
the tl->mask() for the NODE domain being incorrectly resolved to that of
the highest NUMA domain.
tl->mask() for NODE is set to the sd_numa_mask() which depends on the
global "sched_domains_curr_level" hack. "sched_domains_curr_level" is
set to the "tl->numa_level" during tl traversal in build_sched_domains()
calling sd_init() but was not reset before topology_span_sane().
Since "tl->numa_level" still reflected the old value from
build_sched_domains(), topology_span_sane() for the NODE domain trips
when the span of the last NUMA domain overlaps.
Instead of replicating the "sched_domains_curr_level" hack, get rid of
it entirely and instead, pass the entire "sched_domain_topology_level"
object to tl->cpumask() function to prevent such mishap in the future.
sd_numa_mask() now directly references "tl->numa_level" instead of
relying on the global "sched_domains_curr_level" hack to index into
sched_domains_numa_masks[].
The original warning was reproducible on the following NUMA topology
reported by Leon:
$ sudo numactl -H
available: 5 nodes (0-4)
node 0 cpus: 0 1
node 0 size: 2927 MB
node 0 free: 1603 MB
node 1 cpus: 2 3
node 1 size: 3023 MB
node 1 free: 3008 MB
node 2 cpus: 4 5
node 2 size: 3023 MB
node 2 free: 3007 MB
node 3 cpus: 6 7
node 3 size: 3023 MB
node 3 free: 3002 MB
node 4 cpus: 8 9
node 4 size: 3022 MB
node 4 free: 2718 MB
node distances:
node 0 1 2 3 4
0: 10 39 38 37 36
1: 39 10 38 37 36
2: 38 38 10 37 36
3: 37 37 37 10 36
4: 36 36 36 36 10
The above topology can be mimicked using the following QEMU cmd that was
used to reproduce the warning and test the fix:
sudo qemu-system-x86_64 -enable-kvm -cpu host \
-m 20G -smp cpus=10,sockets=10 -machine q35 \
-object memory-backend-ram,size=4G,id=m0 \
-object memory-backend-ram,size=4G,id=m1 \
-object memory-backend-ram,size=4G,id=m2 \
-object memory-backend-ram,size=4G,id=m3 \
-object memory-backend-ram,size=4G,id=m4 \
-numa node,cpus=0-1,memdev=m0,nodeid=0 \
-numa node,cpus=2-3,memdev=m1,nodeid=1 \
-numa node,cpus=4-5,memdev=m2,nodeid=2 \
-numa node,cpus=6-7,memdev=m3,nodeid=3 \
-numa node,cpus=8-9,memdev=m4,nodeid=4 \
-numa dist,src=0,dst=1,val=39 \
-numa dist,src=0,dst=2,val=38 \
-numa dist,src=0,dst=3,val=37 \
-numa dist,src=0,dst=4,val=36 \
-numa dist,src=1,dst=0,val=39 \
-numa dist,src=1,dst=2,val=38 \
-numa dist,src=1,dst=3,val=37 \
-numa dist,src=1,dst=4,val=36 \
-numa dist,src=2,dst=0,val=38 \
-numa dist,src=2,dst=1,val=38 \
-numa dist,src=2,dst=3,val=37 \
-numa dist,src=2,dst=4,val=36 \
-numa dist,src=3,dst=0,val=37 \
-numa dist,src=3,dst=1,val=37 \
-numa dist,src=3,dst=2,val=37 \
-numa dist,src=3,dst=4,val=36 \
-numa dist,src=4,dst=0,val=36 \
-numa dist,src=4,dst=1,val=36 \
-numa dist,src=4,dst=2,val=36 \
-numa dist,src=4,dst=3,val=36 \
...
[ prateek: Moved common functions to include/linux/sched/topology.h,
reuse the common bits for s390 and ppc, commit message ]
Closes: https://lore.kernel.org/lkml/20250610110701.GA256154@unreal/ [1]
Fixes: ccf74128d66c ("sched/topology: Assert non-NUMA topology masks don't (partially) overlap") # ce29a7da84cd, f55dac1dafb3
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reported-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Tested-by: Valentin Schneider <vschneid@redhat.com> # x86
Tested-by: Shrikanth Hegde <sshegde@linux.ibm.com> # powerpc
Link: https://lore.kernel.org/lkml/a3de98387abad28592e6ab591f3ff6107fe01dc1.1755893468.git.tim.c.chen@linux.intel.com/ [2]
|
|
In order to further limit the number of references to the GPIO base
number stored in struct gpio_chip, replace the global GPIO numbers in
the output of debugfs callbacks by hardware offsets.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250826-gpio-dbg-show-base-v1-2-7f27cd7f2256@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Add mlx5_ifc PSP related capabilities structures and HW definitions
needed for PSP support in mlx5.
Link: https://lore.kernel.org/netdev/20250828162953.2707727-1-daniel.zahka@gmail.com/
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Introduce a function pointer type alias io_uring_cmd_tw_t for the
uring_cmd task work callback. This avoids repeating the signature in
several places. Also name both arguments to the callback to clarify what
they represent.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20250902160657.1726828-1-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Hardware of various vendors, but very notably Rockchip, often uses
32-bit registers where the upper 16-bit half of the register is a
write-enable mask for the lower half.
This type of hardware setup allows for more granular concurrent register
write access.
Over the years, many drivers have hand-rolled their own version of this
macro, usually without any checks, often called something like
HIWORD_UPDATE or FIELD_PREP_HIWORD, commonly with slightly different
semantics between them.
Clearly there is a demand for such a macro, and thus the demand should
be satisfied in a common header file. As this is a convention that spans
across multiple vendors, and similar conventions may also have
cross-vendor adoption, it's best if it lives in a vendor-agnostic header
file that can be expanded over time.
Add hw_bitfield.h with two macros: FIELD_PREP_WM16, and
FIELD_PREP_WM16_CONST. The latter is a version that can be used in
initializers, like FIELD_PREP_CONST.
Suggested-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
|
|
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1uslwn-00000001SOx-0a7H@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove deadcode since CXL no longer calls hmat_update_target_coordinates().
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20250829222907.1290912-5-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
The current implementation of CXL memory hotplug notifier gets called
before the HMAT memory hotplug notifier. The CXL driver calculates the
access coordinates (bandwidth and latency values) for the CXL end to
end path (i.e. CPU to endpoint). When the CXL region is onlined, the CXL
memory hotplug notifier writes the access coordinates to the HMAT target
structs. Then the HMAT memory hotplug notifier is called and it creates
the access coordinates for the node sysfs attributes.
During testing on an Intel platform, it was found that although the
newly calculated coordinates were pushed to sysfs, the sysfs attributes for
the access coordinates showed up with the wrong initiator. The system has
4 nodes (0, 1, 2, 3) where node 0 and 1 are CPU nodes and node 2 and 3 are
CXL nodes. The expectation is that node 2 would show up as a target to node
0:
/sys/devices/system/node/node2/access0/initiators/node0
However it was observed that node 2 showed up as a target under node 1:
/sys/devices/system/node/node2/access0/initiators/node1
The original intent of the 'ext_updated' flag in HMAT handling code was to
stop HMAT memory hotplug callback from clobbering the access coordinates
after CXL has injected its calculated coordinates and replaced the generic
target access coordinates provided by the HMAT table in the HMAT target
structs. However the flag is hacky at best and blocks the updates from
other CXL regions that are onlined in the same node later on. Remove the
'ext_updated' flag usage and just update the access coordinates for the
nodes directly without touching HMAT target data.
The hotplug memory callback ordering is changed. Instead of changing CXL,
move HMAT back so there's room for the levels rather than have CXL share
the same level as SLAB_CALLBACK_PRI. The change will resulting in the CXL
callback to be executed after the HMAT callback.
With the change, the CXL hotplug memory notifier runs after the HMAT
callback. The HMAT callback will create the node sysfs attributes for
access coordinates. The CXL callback will write the access coordinates to
the now created node sysfs attributes directly and will not pollute the
HMAT target values.
A nodemask is introduced to keep track if a node has been updated and
prevents further updates.
Fixes: 067353a46d8c ("cxl/region: Add memory hotplug notifier for cxl region")
Cc: stable@vger.kernel.org
Tested-by: Marc Herbert <marc.herbert@linux.intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20250829222907.1290912-4-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
Add helper function node_update_perf_attrs() to allow update of node access
coordinates computed by an external agent such as CXL. The helper allows
updating of coordinates after the attribute being created by HMAT.
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20250829222907.1290912-3-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
Add clarification to comment for memory hotplug callback ordering as the
current comment does not provide clear language on which callback happens
first.
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20250829222907.1290912-2-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"17 hotfixes. 13 are cc:stable and the remainder address post-6.16
issues or aren't considered necessary for -stable kernels. 11 of these
fixes are for MM.
This includes a three-patch series from Harry Yoo which fixes an
intermittent boot failure which can occur on x86 systems. And a
two-patch series from Alexander Gordeev which fixes a KASAN crash on
S390 systems"
* tag 'mm-hotfixes-stable-2025-09-01-17-20' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: fix possible deadlock in kmemleak
x86/mm/64: define ARCH_PAGE_TABLE_SYNC_MASK and arch_sync_kernel_mappings()
mm: introduce and use {pgd,p4d}_populate_kernel()
mm: move page table sync declarations to linux/pgtable.h
proc: fix missing pde_set_flags() for net proc files
mm: fix accounting of memmap pages
mm/damon/core: prevent unnecessary overflow in damos_set_effective_quota()
kexec: add KEXEC_FILE_NO_CMA as a legal flag
kasan: fix GCC mem-intrinsic prefix with sw tags
mm/kasan: avoid lazy MMU mode hazards
mm/kasan: fix vmalloc shadow memory (de-)population races
kunit: kasan_test: disable fortify string checker on kasan_strings() test
selftests/mm: fix FORCE_READ to read input value correctly
mm/userfaultfd: fix kmap_local LIFO ordering for CONFIG_HIGHPTE
ocfs2: prevent release journal inode after journal shutdown
rust: mm: mark VmaNew as transparent
of_numa: fix uninitialized memory nodes causing kernel panic
|
|
Loongson Security Engine chip supports RNG, SM2, SM3 and SM4 accelerator
engines. This is the base driver for other specific engine drivers.
Co-developed-by: Yinggang Gu <guyinggang@loongson.cn>
Signed-off-by: Yinggang Gu <guyinggang@loongson.cn>
Signed-off-by: Qunqin Zhao <zhaoqunqin@loongson.cn>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://lore.kernel.org/r/20250705072045.1067-2-zhaoqunqin@loongson.cn
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Some Ethernet controllers do not have an integrated PTP timer function.
Instead, the PTP timer is a separated device and provides PTP hardware
clock to the Ethernet controller to use. Therefore, the Ethernet
controller driver needs to obtain the PTP clock's phc_index in its
ethtool_ops::get_ts_info(). Currently, most drivers implement this in
the following ways.
1. The PTP device driver adds a custom API and exports it to the Ethernet
controller driver.
2. The PTP device driver adds private data to its device structure. So
the private data structure needs to be exposed to the Ethernet controller
driver.
When registering the ptp clock, ptp_clock_register() always saves the
ptp_clock pointer to the private data of ptp_clock::dev. Therefore, as
long as ptp_clock::dev is obtained, the phc_index can be obtained. So
the following generic APIs can be added to the ptp driver to obtain the
phc_index.
1. ptp_clock_index_by_dev(): Obtain the phc_index by the device pointer
of the PTP device.
2.ptp_clock_index_by_of_node(): Obtain the phc_index by the of_node
pointer of the PTP device.
Also, we can add another API like ptp_clock_index_by_fwnode() to get the
phc_index by fwnode of PTP device. However, this API is not used in this
patch set, so it is better to add it when needed.
Suggested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20250829050615.1247468-4-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The performance protocol ops table incorrectly referenced
power_scale_mw_get instead of the correct power_scale_get.
Fix the typo to use the proper function.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Message-Id: <20250831-scmi-cpufreq-v1-1-493031cf6e9b@nxp.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Add an equivalent of list_first_entry_or_null() to obtain the last element
of a list.
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250801-drm-bridge-alloc-getput-drm_bridge_get_next_bridge-v2-1-888912b0be13@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
This check will be needed in later patches, and there's no point
open-coding it each time.
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Link: https://lore.kernel.org/20250805-procfs-pidns-api-v4-1-705f984940e7@cyphar.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
