| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Freezing the request queue from inside sysfs store callbacks may cause a
deadlock in combination with the dm-multipath driver and the
queue_if_no_path option. Additionally, freezing the request queue slows
down system boot on systems where sysfs attributes are set synchronously.
Fix this by removing the blk_mq_freeze_queue() / blk_mq_unfreeze_queue()
calls from the store callbacks that do not strictly need these callbacks.
Add the __data_racy annotation to request_queue.rq_timeout to suppress
KCSAN data race reports about the rq_timeout reads.
This patch may cause a small delay in applying the new settings.
For all the attributes affected by this patch, I/O will complete
correctly whether the old or the new value of the attribute is used.
This patch affects the following sysfs attributes:
* io_poll_delay
* io_timeout
* nomerges
* read_ahead_kb
* rq_affinity
Here is an example of a deadlock triggered by running test srp/002
if this patch is not applied:
task:multipathd
Call Trace:
<TASK>
__schedule+0x8c1/0x1bf0
schedule+0xdd/0x270
schedule_preempt_disabled+0x1c/0x30
__mutex_lock+0xb89/0x1650
mutex_lock_nested+0x1f/0x30
dm_table_set_restrictions+0x823/0xdf0
__bind+0x166/0x590
dm_swap_table+0x2a7/0x490
do_resume+0x1b1/0x610
dev_suspend+0x55/0x1a0
ctl_ioctl+0x3a5/0x7e0
dm_ctl_ioctl+0x12/0x20
__x64_sys_ioctl+0x127/0x1a0
x64_sys_call+0xe2b/0x17d0
do_syscall_64+0x96/0x3a0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
</TASK>
task:(udev-worker)
Call Trace:
<TASK>
__schedule+0x8c1/0x1bf0
schedule+0xdd/0x270
blk_mq_freeze_queue_wait+0xf2/0x140
blk_mq_freeze_queue_nomemsave+0x23/0x30
queue_ra_store+0x14e/0x290
queue_attr_store+0x23e/0x2c0
sysfs_kf_write+0xde/0x140
kernfs_fop_write_iter+0x3b2/0x630
vfs_write+0x4fd/0x1390
ksys_write+0xfd/0x230
__x64_sys_write+0x76/0xc0
x64_sys_call+0x276/0x17d0
do_syscall_64+0x96/0x3a0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
</TASK>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Nilay Shroff <nilay@linux.ibm.com>
Cc: Martin Wilck <mwilck@suse.com>
Cc: Benjamin Marzinski <bmarzins@redhat.com>
Cc: stable@vger.kernel.org
Fixes: af2814149883 ("block: freeze the queue in queue_attr_store")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Some but not all .ra_pages changes happen while block layer I/O is paused
with blk_mq_freeze_queue(). Filesystems may read .ra_pages even while
block layer I/O is paused, e.g. from inside their .fadvise callback.
Annotating all .ra_pages reads with READ_ONCE() would be cumbersome.
Hence, add the __data_racy annotatation to the .ra_pages member
variable.
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Remove unused devm_free_percpu().
By the way, it was never used in the drivers/ from day 1.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20251111145046.997309-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Add support for EFI_EDID_DISCOVERED_PROTOCOL and EFI_EDID_ACTIVE_PROTOCOL
as defined in UEFI 2.8, sec 12.9. Define GUIDs and data structures in the
rsp header files.
In the GOP setup function, read the EDID of the primary GOP device. First
try EFI_EDID_ACTIVE_PROTOCOL, which supports user-specified EDID data. Or
else try EFI_EDID_DISCOVERED_PROTOCOL, which returns the display device's
native EDID. If no EDID could be retrieved, clear the storage.
Rename efi_setup_gop() to efi_setup_graphics() to reflect the changes
Let callers pass an optional instance of struct edid_data, if they are
interested.
While screen_info and edid_info come from the same device handle, they
should be considered indendent data. The former refers to the graphics
mode, the latter refers to the display device. GOP devices might not
provide both.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Resolve an issue with the coding style.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Make the different debounce timers configurable from the devicetree.
Depending on the board design, these have to be set different than the
default register values.
Signed-off-by: Martijn de Gouw <martijn.de.gouw@prodrive-technologies.com>
Link: https://patch.msgid.link/20251117202215.1936139-2-martijn.de.gouw@prodrive-technologies.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Controller driver probes first, enables link training and scans the bus.
When the PCI bridge is found, its child DT nodes will be scanned and
pwrctrl devices will be created if needed. By the time pwrctrl driver probe
gets called, link training is already enabled by controller driver.
Certain devices like TC9563, which uses the PCI pwrctl framework, need to
configure the device before the PCIe link is up.
As the controller driver already enables link training as part of its
probe, the moment device is powered on, controller and device participate
in link training and link can come up immediately and may not have time to
configure the device.
So we need to stop the link training by using assert_perst() by asserting
PERST# and de-asserting PERST# after device is configured.
Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20251101-tc9563-v9-2-de3429f7787a@oss.qualcomm.com
|
|
Add a new phy_notify_state() api that notifies and configures a phy for a
given state transition.
This is intended to be used by phy drivers which need to do some runtime
configuration of parameters that can't be handled by phy_calibrate() or
phy_power_{on|off}().
The first usage of this API is in the Samsung UFS phy that needs to issue
some register writes when entering and exiting the hibernate link state.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251112-phy-notify-pmstate-v5-1-39df622d8fcb@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
RESET_CONTROL_FLAGS_BIT_* macros use BIT(), but reset.h does not
include bits.h. This causes compilation errors when including
reset.h standalone.
Include bits.h to make reset.h self-contained.
Suggested-by: Troy Mitchell <troy.mitchell@linux.dev>
Reviewed-by: Troy Mitchell <troy.mitchell@linux.dev>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Encrow Thorne <jyc0019@gmail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
There are no more users of this code. Let's remove the exported symbols
and the implementation from reset core.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
[p.zabel@pengutronix.de: folded in 8e6ec20e-8965-4b42-99fc-0462269ff2f1@paulmck-laptop]
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
The recent fix to properly initialize the tags of the huge zero folio
had an unfortunate not-so-subtle side effect: it caused the actual
*contents* of the huge zero folio to not be initialized at all when the
hardware didn't support the memory tagging.
The reason was the unfortunate semantics of tag_clear_highpage(): on
hardware that didn't do the tagging, it would silently just not do
anything at all. And since this is done only on arm64 with MTE support,
that basically meant most hardware.
It wasn't necessarily immediately obvious since the huge zero page isn't
necessarily very heavily used - or because it might already be zero
because all-zeroes is the most common pattern. But it ends up causing
random odd user space failures when you do hit it.
The unfortunate semantics have been around for a while, but became a
real bug only when we started actively using __GFP_ZEROTAGS in the
generic get_huge_zero_folio() function - before that, it had only ever
been used in code that checked that the hardware supported it.
Fix this by simply changing the semantics of tag_clear_highpage() to
return whether it actually successfully did something or not. While at
it, also make it initialize multiple pages in one go, since that's
actually what the only caller wants it to do and it simplifies the whole
logic.
Fixes: adfb6609c680 ("mm/huge_memory: initialise the tags of the huge zero folio")
Link: https://lore.kernel.org/all/20251117082023.90176-1-00107082@163.com/
Reviewed-by: David Hildenbrand (Red Hat) <david@kernel.org>
Reported-and-tested-by: David Wang <00107082@163.com>
Reported-and-tested-by: Carlos Llamas <cmllamas@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This if statement is indented weirdly. It's a duplicate and doesn't
affect runtime (beyond wasting a little time). Delete it.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/aRxP3YcwscrP1BU_@stanley.mountain
|
|
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>
From AudioDSP perspective, only gateway-related modules e.g.: Copier:
Small set of changes providing new feature which the driver is already
utilizing on the market - for its Long-Term-Support (LTS) devices.
The goal is to cover systems which shipped with invalid Non HDAudio Link
Table (NHLT) - not just the descriptors (headers), but cases where the
hardware configuration is invalid too. The table is part of the ACPI
tree and forcing BIOS updates is not a feasible solution. With the
override, the topology file can carry the hardware configuration
instead.
From AudioDSP perspective, only gateway-related modules e.g.: Copier
care about the procedure. To ensure correct order of operations when
initializing such modules, the overrides take precedence over what's
currently there in the NHLT.
|
|
The external function definitions do not need the "extern" keyword.
Remove it to silence the associated checkpatch warnings.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20251111131125.3379-4-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Adds the ppt_* and nv_* tuning knobs that are available via WMI methods
and adds proper min/max levels plus defaults.
The min/max are defined by ASUS and typically gained by looking at what
they allow in the ASUS Armoury Crate application - ASUS does not share
the values outside of this. It could also be possible to gain the AMD
values by use of ryzenadj and testing for the minimum stable value.
The general rule of thumb for adding to the match table is that if the
model range has a single CPU used throughout, then the DMI match can
omit the last letter of the model number as this is the GPU model.
If a min or max value is not provided it is assumed that the particular
setting is not supported. for example ppt_pl2_sppt_min/max is not set.
If a <ppt_setting>_def is not set then the default is assumed to be
<ppt_setting>_max
It is assumed that at least AC settings are available so that the
firmware attributes will be created - if no DC table is available
and power is on DC, then reading the attributes is -ENODEV.
Co-developed-by: Denis Benato <denis.benato@linux.dev>
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Mateusz Schyboll <dragonn@op.pl>
Tested-by: Porfet Lillian <porfet828@gmail.com>
Link: https://patch.msgid.link/20251102215319.3126879-10-denis.benato@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Maintain power-related WMI macros naming consistency:
rename ASUS_WMI_DEVID_PPT_FPPT to ASUS_WMI_DEVID_PPT_PL3_FPPT.
Link: https://lore.kernel.org/all/cad7b458-5a7a-4975-94a1-d0c74f6f3de5@oracle.com/
Suggested-by: ALOK TIWARI <alok.a.tiwari@oracle.com>
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Link: https://.../
Link: https://patch.msgid.link/20251102215319.3126879-9-denis.benato@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add screen_auto_brightness toggle supported on some laptops.
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20251102215319.3126879-7-denis.benato@linux.dev
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Implement the APU memory size control under the asus-armoury module using
the fw_attributes class.
This allows the APU allocated memory size to be adjusted depending on
the users priority. A reboot is required after change.
Co-developed-by: Denis Benato <denis.benato@linux.dev>
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://patch.msgid.link/20251102215319.3126879-5-denis.benato@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Syzkaller triggers an invalid memory access issue following fault
injection in update_effective_progs. The issue can be described as
follows:
__cgroup_bpf_detach
update_effective_progs
compute_effective_progs
bpf_prog_array_alloc <-- fault inject
purge_effective_progs
/* change to dummy_bpf_prog */
array->items[index] = &dummy_bpf_prog.prog
---softirq start---
__do_softirq
...
__cgroup_bpf_run_filter_skb
__bpf_prog_run_save_cb
bpf_prog_run
stats = this_cpu_ptr(prog->stats)
/* invalid memory access */
flags = u64_stats_update_begin_irqsave(&stats->syncp)
---softirq end---
static_branch_dec(&cgroup_bpf_enabled_key[atype])
The reason is that fault injection caused update_effective_progs to fail
and then changed the original prog into dummy_bpf_prog.prog in
purge_effective_progs. Then a softirq came, and accessing the members of
dummy_bpf_prog.prog in the softirq triggers invalid mem access.
To fix it, skip updating stats when stats is NULL.
Fixes: 492ecee892c2 ("bpf: enable program stats")
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Link: https://lore.kernel.org/r/20251115102343.2200727-1-pulehui@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
At this point there are very few call chains that might lead to
d_make_discardable() on a dentry that hadn't been made persistent:
calls of simple_unlink() and simple_rmdir() in configfs and
apparmorfs.
Both filesystems do pin (part of) their contents in dcache, but
they are currently playing very unusual games with that. Converting
them to more usual patterns might be possible, but it's definitely
going to be a long series of changes in both cases.
For now the easiest solution is to have both stop using simple_unlink()
and simple_rmdir() - that allows to make d_make_discardable() warn
when given a non-persistent dentry.
Rather than giving them full-blown private copies (with calls of
d_make_discardable() replaced with dput()), let's pull the parts of
simple_unlink() and simple_rmdir() that deal with timestamps and link
counts into separate helpers (__simple_unlink() and __simple_rmdir()
resp.) and have those used by configfs and apparmorfs.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
it's an unused alias for securityfs_remove()
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Not used anymore.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
The "phy-mode" property of devicetree indicates whether the PCB has
delay now, which means the mac needs to modify the PHY mode based
on whether there is an internal delay in the mac.
This modification is similar for many ethernet drivers. To simplify
code, define the helper phy_fix_phy_mode_for_mac_delays(speed, mac_txid,
mac_rxid) to fix PHY mode based on whether mac adds internal delay.
Suggested-by: Russell King (Oracle) <linux@armlinux.org.uk>
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251114003805.494387-3-inochiama@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Extend cpu_cache_invalidate_memregion() to support invalidating a
particular range of memory by introducing start and length parameters.
Control of types of invalidation is left for when use cases turn up. For
now everything is Clean and Invalidate.
Where the range is unknown, use the provided cpu_cache_invalidate_all()
helper to act as documentation of intent in a fashion that is clearer than
passing (0, -1) to cpu_cache_invalidate_memregion().
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
cpu_cache_invalidate_memregion()
The res_desc parameter was originally introduced for documentation purposes
and with the idea that with HDM-DB CXL invalidation could be triggered from
the device. That has not come to pass and the continued existence of the
option is confusing when we add a range in the following patch which might
not be a strict subset of the res_desc. So avoid that confusion by dropping
the parameter.
Link: https://lore.kernel.org/linux-mm/686eedb25ed02_24471002e@dwillia2-xfh.jf.intel.com.notmuch/
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
There are no longer any board files including the DaVinci SPI platform
data header. Let's move the bits and pieces that are used in the driver
into the driver .c file itself and remove the header.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://patch.msgid.link/20251117-davinci-spi-v2-1-cd799d17f04a@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Fix unitialized variable in statmount_string()
- Fix hostfs mounting when passing host root during boot
- Fix dynamic lookup to fail on cell lookup failure
- Fix missing file type when reading bfs inodes from disk
- Enforce checking of sb_min_blocksize() calls and update all callers
accordingly
- Restore write access before closing files opened by open_exec() in
binfmt_misc
- Always freeze efivarfs during suspend/hibernate cycles
- Fix statmount()'s and listmount()'s grab_requested_mnt_ns() helper to
actually allow mount namespace file descriptor in addition to mount
namespace ids
- Fix tmpfs remount when noswap is specified
- Switch Landlock to iput_not_last() to remove false-positives from
might_sleep() annotations in iput()
- Remove dead node_to_mnt_ns() code
- Ensure that per-queue kobjects are successfully created
* tag 'vfs-6.18-rc7.fixes' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs:
landlock: fix splats from iput() after it started calling might_sleep()
fs: add iput_not_last()
shmem: fix tmpfs reconfiguration (remount) when noswap is set
fs/namespace: correctly handle errors returned by grab_requested_mnt_ns
power: always freeze efivarfs
binfmt_misc: restore write access before closing files opened by open_exec()
block: add __must_check attribute to sb_min_blocksize()
virtio-fs: fix incorrect check for fsvq->kobj
xfs: check the return value of sb_min_blocksize() in xfs_fs_fill_super
isofs: check the return value of sb_min_blocksize() in isofs_fill_super
exfat: check return value of sb_min_blocksize in exfat_read_boot_sector
vfat: fix missing sb_min_blocksize() return value checks
mnt: Remove dead code which might prevent from building
bfs: Reconstruct file type when loading from disk
afs: Fix dynamic lookup to fail on cell lookup failure
hostfs: Fix only passing host root in boot stage with new mount
fs: Fix uninitialized 'offp' in statmount_string()
|
|
Add a randomized algorithm that runs newidle balancing proportional to
its success rate.
This improves schbench significantly:
6.18-rc4: 2.22 Mrps/s
6.18-rc4+revert: 2.04 Mrps/s
6.18-rc4+revert+random: 2.18 Mrps/S
Conversely, per Adam Li this affects SpecJBB slightly, reducing it by 1%:
6.17: -6%
6.17+revert: 0%
6.17+revert+random: -1%
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Chris Mason <clm@meta.com>
Link: https://lkml.kernel.org/r/6825c50d-7fa7-45d8-9b81-c6e7e25738e2@meta.com
Link: https://patch.msgid.link/20251107161739.770122091@infradead.org
|
|
|
|
Add Nova Lake S (NVL-S) audio Device ID
The ID will be used by HDA legacy, SOF audio stack and the driver
to determine which audio stack should be used (intel-dsp-config).
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251104121650.21872-2-peter.ujfalusi@linux.intel.com
|
|
This adds support for ESMT F50L1G41LC, which appears to be an updated
version of the already supported F50L1G41LB.
Add esmt_8c SPI_NAND manufacturer to account for the newly used vendor
ID with support for the ESMT F50L1G41LC chip.
Link: https://github.com/openwrt/openwrt/pull/15214#issuecomment-3514824435
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux.git into gpio/for-next
Immutable branch between the GPIO, ASoC and regulator trees for v6.19-rc1
Add better support for GPIOs shared by multiple consumers.
|
|
Provide an interface allowing consumers to check if a GPIO descriptor
represents a GPIO that can potentially be shared by multiple consumers
at the same time. This is exposed to allow subsystems that already
work around the limitations of the current non-exclusive GPIO handling
in some ways, to gradually convert to relying on the new shared GPIO
feature of GPIOLIB.
Extend the gpiolib-shared module to mark the GPIO shared proxy
descriptors with a flag checked by the new interface.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20251112-gpio-shared-v4-6-b51f97b1abd8@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Implement a function for checking if a string ends with a different
string and add its kunit test cases.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20251112-gpio-shared-v4-1-b51f97b1abd8@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Poison (or ECC) errors can be very common on a large size cluster. The
kernel MM currently does not handle ECC errors / poison on a memory region
that is not backed by struct pages. If a memory region mapped using
remap_pfn_range() for example, but not added to the kernel, MM will not
have associated struct pages. Add a new mechanism to handle memory
failure on such memory.
Make kernel MM expose a function to allow modules managing the device
memory to register the device memory SPA and the address space associated
it. MM maintains this information as an interval tree. On poison, MM can
search for the range that the poisoned PFN belong and use the
address_space to determine the mapping VMA.
In this implementation, kernel MM follows the following sequence that is
largely similar to the memory_failure() handler for struct page backed
memory:
1. memory_failure() is triggered on reception of a poison error. An
absence of struct page is detected and consequently
memory_failure_pfn() is executed.
2. memory_failure_pfn() collects the processes mapped to the PFN.
3. memory_failure_pfn() sends SIGBUS to all the processes mapping the
faulty PFN using kill_procs().
Note that there is one primary difference versus the handling of the
poison on struct pages, which is to skip unmapping to the faulty PFN.
This is done to handle the huge PFNMAP support added recently [1] that
enables VM_PFNMAP vmas to map at PMD or PUD level. A poison to a PFN
mapped in such as way would need breaking the PMD/PUD mapping into PTEs
that will get mirrored into the S2. This can greatly increase the cost of
table walks and have a major performance impact.
Link: https://lore.kernel.org/all/20240826204353.2228736-1-peterx@redhat.com/ [1]
Link: https://lkml.kernel.org/r/20251102184434.2406-3-ankita@nvidia.com
Signed-off-by: Ankit Agrawal <ankita@nvidia.com>
Cc: Aniket Agashe <aniketa@nvidia.com>
Cc: Borislav Betkov <bp@alien8.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Joanthan Cameron <Jonathan.Cameron@huawei.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Kirti Wankhede <kwankhede@nvidia.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Matthew R. Ochs <mochs@nvidia.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Neo Jia <cjia@nvidia.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shuai Xue <xueshuai@linux.alibaba.com>
Cc: Smita Koralahalli Channabasappa <smita.koralahallichannabasappa@amd.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Tarun Gupta <targupta@nvidia.com>
Cc: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Cc: Vikram Sethi <vsethi@nvidia.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Zhi Wang <zhiw@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
memory_notify() is responsible for sending events related to memory
hotplugging to a notification queue. Since all the events must match one
of the values from the enum memory_block_state, it is appropriate to
change the function parameter type to make this condition explicit at
compile time.
Link: https://lkml.kernel.org/r/20251029195617.2210700-4-linux@israelbatista.dev.br
Signed-off-by: Israel Batista <linux@israelbatista.dev.br>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Omar Sandoval <osandov@osandov.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The state of a memory block should be restricted to values specified in
the documentation of the memory hotplug API. However, since the state
field in the memory_block struct was defined as an unsigned long, this
restriction was not enforced at compile time.
With the introduction of the enum memory_block_state, it is now possible
to incorporate the desired semantics in the field declaration and enforce
these restrictions at compile time.
[akpm@linux-foundation.org: fix whitespace, per Randy]
Link: https://lkml.kernel.org/r/20251029195617.2210700-3-linux@israelbatista.dev.br
Signed-off-by: Israel Batista <linux@israelbatista.dev.br>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Omar Sandoval <osandov@osandov.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm: Convert memory block states (MEM_*) macros to enums", v2.
The MEM_* constants indicating the state of a memory block are currently
defined as macros, meaning their definitions will be omitted from the
debuginfo on most kernel builds. This makes it harder for debuggers to
correctly map the block state at runtime, which can be quite useful when
analysing errors related to memory hot plugging and unplugging with tools
such as drgn.
Converting the constants to an enum ensures the correct information is
emitted by the compiler and available for the debugger, without needing to
hard-code them into the debugger and track their changes.
This patch series aims to replace the current macros with a newly created
enum named memory_block_state, while also taking advantage of the compile
time guarantees that we get when using enums.
The first patch does the conversion of the macros to an enum, while the
2nd and 3rd patches use this enum to clean up some type declarations and
make sure that only valid values are used.
This patch (of 3):
Converting the MEM_* constants from macros to an enum ensures that their
values will be correctly emitted in the debug symbols, making it easier to
trace the meaning of each value when debugging with tools such as drgn,
without the need to hard-code the values.
Since the values are mutually exclusive and they are not exposed directly
to userspace, I also dropped the misleading pattern (1<<X) that made it
look like they were combinable flags.
Link: https://lkml.kernel.org/r/20251029195617.2210700-1-linux@israelbatista.dev.br
Link: https://lkml.kernel.org/r/20251029195617.2210700-2-linux@israelbatista.dev.br
Signed-off-by: Israel Batista <linux@israelbatista.dev.br>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Omar Sandoval <osandov@osandov.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm/swapfile.c: select swap devices of default priority round
robin", v5.
Currently, on system with multiple swap devices, swap allocation will
select one swap device according to priority. The swap device with the
highest priority will be chosen to allocate firstly.
People can specify a priority from 0 to 32767 when swapon a swap device,
or the system will set it from -2 then downwards by default. Meanwhile,
on NUMA system, the swap device with node_id will be considered first on
that NUMA node of the node_id.
In the current code, an array of plist, swap_avail_heads[nid], is used to
organize swap devices on each NUMA node. For each NUMA node, there is a
plist organizing all swap devices. The 'prio' value in the plist is the
negated value of the device's priority due to plist being sorted from low
to high. The swap device owning one node_id will be promoted to the front
position on that NUMA node, then other swap devices are put in order of
their default priority.
E.g I got a system with 8 NUMA nodes, and I setup 4 zram partition as
swap devices.
Current behaviour:
their priorities will be(note that -1 is skipped):
NAME TYPE SIZE USED PRIO
/dev/zram0 partition 16G 0B -2
/dev/zram1 partition 16G 0B -3
/dev/zram2 partition 16G 0B -4
/dev/zram3 partition 16G 0B -5
And their positions in the 8 swap_avail_lists[nid] will be:
swap_avail_lists[0]: /* node 0's available swap device list */
zram0 -> zram1 -> zram2 -> zram3
prio:1 prio:3 prio:4 prio:5
swap_avali_lists[1]: /* node 1's available swap device list */
zram1 -> zram0 -> zram2 -> zram3
prio:1 prio:2 prio:4 prio:5
swap_avail_lists[2]: /* node 2's available swap device list */
zram2 -> zram0 -> zram1 -> zram3
prio:1 prio:2 prio:3 prio:5
swap_avail_lists[3]: /* node 3's available swap device list */
zram3 -> zram0 -> zram1 -> zram2
prio:1 prio:2 prio:3 prio:4
swap_avail_lists[4-7]: /* node 4,5,6,7's available swap device list */
zram0 -> zram1 -> zram2 -> zram3
prio:2 prio:3 prio:4 prio:5
The adjustment for swap device with node_id intended to decrease the
pressure of lock contention for one swap device by taking different swap
device on different node. The adjustment was introduced in commit
a2468cc9bfdf ("swap: choose swap device according to numa node").
However, the adjustment is a little coarse-grained. On the node, the swap
device sharing the node's id will always be selected firstly by node's
CPUs until exhausted, then next one. And on other nodes where no swap
device shares its node id, swap device with priority '-2' will be selected
firstly until exhausted, then next with priority '-3'.
This is the swapon output during the process high pressure vm-scability
test is being taken. It's clearly showing zram0 is heavily exploited
until exhausted.
===================================
[root@hp-dl385g10-03 ~]# swapon
NAME TYPE SIZE USED PRIO
/dev/zram0 partition 16G 15.7G -2
/dev/zram1 partition 16G 3.4G -3
/dev/zram2 partition 16G 3.4G -4
/dev/zram3 partition 16G 2.6G -5
The node based strategy on selecting swap device is much better then the
old way one by one selecting swap device. However it is still
unreasonable because swap devices are assumed to have similar accessing
speed if no priority is specified when swapon. It's unfair and doesn't
make sense just because one swap device is swapped on firstly, its
priority will be higher than the one swapped on later.
So in this patchset, change is made to select the swap device round robin
if default priority. In code, the plist array swap_avail_heads[nid] is
replaced with a plist swap_avail_head which reverts commit a2468cc9bfdf.
Meanwhile, on top of the revert, further change is taken to make any
device w/o specified priority get the same default priority '-1'. Surely,
swap device with specified priority are always put foremost, this is not
impacted. If you care about their different accessing speed, then use
'swapon -p xx' to deploy priority for your swap devices.
New behaviour:
swap_avail_list: /* one global available swap device list */
zram0 -> zram1 -> zram2 -> zram3
prio:1 prio:1 prio:1 prio:1
This is the swapon output during the process high pressure vm-scability
being taken, all is selected round robin:
=======================================
[root@hp-dl385g10-03 linux]# swapon
NAME TYPE SIZE USED PRIO
/dev/zram0 partition 16G 12.6G -1
/dev/zram1 partition 16G 12.6G -1
/dev/zram2 partition 16G 12.6G -1
/dev/zram3 partition 16G 12.6G -1
With the change, we can see about 18% efficiency promotion as below:
vm-scability test:
==================
Test with:
usemem --init-time -O -y -x -n 31 2G (4G memcg, zram as swap)
Before: After:
System time: 637.92 s 526.74 s (lower is better)
Sum Throughput: 3546.56 MB/s 4207.56 MB/s (higher is better)
Single process Throughput: 114.40 MB/s 135.72 MB/s (higher is better)
free latency: 10138455.99 us 6810119.01 us (low is better)
This patch (of 2):
This reverts commit a2468cc9bfdf ("swap: choose swap device according to
numa node").
After this patch, the behaviour will change back to pre-commit
a2468cc9bfdf. Means the priority will be set from -1 then downwards by
default, and when swapping, it will exhault swap device one by one
according to priority from high to low. This is preparation work for
later change.
[root@hp-dl385g10-03 ~]# swapon
NAME TYPE SIZE USED PRIO
/dev/zram0 partition 16G 16G -1
/dev/zram1 partition 16G 966.2M -2
/dev/zram2 partition 16G 0B -3
/dev/zram3 partition 16G 0B -4
Link: https://lkml.kernel.org/r/20251028034308.929550-1-bhe@redhat.com
Link: https://lkml.kernel.org/r/20251028034308.929550-2-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Suggested-by: Chris Li <chrisl@kernel.org>
Acked-by: Chris Li <chrisl@kernel.org>
Acked-by: Nhat Pham <nphamcs@gmail.com>
Reviewed-by: Kairui Song <kasong@tencent.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
INVALID_PHYS_ADDR has very similar definitions across the code base.
Hence just move that inside header <liux/mm.h> for more generic usage.
Also drop the now redundant ones which are no longer required.
Link: https://lkml.kernel.org/r/20251021025638.2420216-1-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com> [s390]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
We declare vma_start_read() as a static function in mm/mmap_lock.c, so
there is no need to provide a stub for !CONFIG_PER_VMA_LOCK.
__is_vma_write_locked() is declared in a header and should therefore be
static inline.
Put parens around (refcnt & VMA_LOCK_OFFSET) in is_vma_writer_only() to
make precedence clear.
Link: https://lkml.kernel.org/r/20251024090902.1118174-1-lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Liam Howlett <liam.howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm/damon: support pin-point targets removal".
DAMON maintains the targets in a list, and allows committing only an
entire list of targets having the new parameters. Targets having same
index on the lists are treated as matching source and destination
targets. If an existing target cannot find a matching one in the
sources list, the target is removed. This means that there is no way to
remove only a specific monitoring target in the middle of the current
targets list.
Such pin-point target removal is really needed in some use cases,
though. Monitoring access patterns on virtual address spaces of
processes that spawned from the same ancestor is one example. If a
process of the group is terminated, the user may want to remove the
matching DAMON target as soon as possible, to save in-kernel memory
usage for the unnecessary target data. The user may also want to do
that without turning DAMON off or removing unnecessary targets, to keep
the current monitoring results for other active processes.
Extend DAMON kernel API and sysfs ABI to support the pin-point removal
in the following way. For API, add a new damon_target field, namely
'obsolete'. If the field on parameters commit source target is set, it
means the matching destination target is obsolete. Then the parameters
commit logic removes the destination target from the existing targets
list. For sysfs ABI, add a new file under the target directory, namely
'obsolete_target'. It is connected with the 'obsolete' field of the
commit source targets, so internally using the new API.
Also add a selftest for the new feature. The related helper scripts for
manipulating the sysfs interface and dumping in-kernel DAMON status are
also extended for this. Note that the selftest part was initially
posted as an individual RFC series [1], but now merged into this one.
Bijan Tabatabai has originally reported this issue, and participated in
this solution design on a GitHub issue [1] for DAMON user-space tool.
This patch (of 9):
DAMON's monitoring targets parameters update function,
damon_commit_targets(), is not providing a way to remove a target in the
middle of the existing targets list. Extend the API by adding a field to
struct damon_target. If the field of a damon_commit_targets() source
target is set, it indicates the matching target on the existing targets
list is obsolete. damon_commit_targets() understands that and removes
those from the list, while respecting the index based matching for other
non-obsolete targets.
Link: https://lkml.kernel.org/r/20251023012535.69625-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20251023012535.69625-2-sj@kernel.org
Link: https://github.com/damonitor/damo/issues/36 [1]
Signed-off-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Bijan Tabatabai <bijan311@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
We no longer need this GFP parameter after commit 8578e0c00dcf ("mm, swap:
use the swap table for the swap cache and switch API"). Before that
commit the GFP parameter is already almost identical for all callers, so
nothing changed by that commit. Swap table just moved the GFP to lower
layer and make it more defined and changes depend on atomic or sleep
allocation.
Now this parameter is no longer used, just remove it. No behavior change.
Link: https://lkml.kernel.org/r/20251024-swap-clean-after-swap-table-p1-v2-3-a709469052e7@tencent.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Acked-by: Chris Li <chrisl@kernel.org>
Acked-by: Nhat Pham <nphamcs@gmail.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Barry Song <baohua@kernel.org>
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Introduce a new IOMMU interface to flush IOTLB paging cache entries for
the CPU kernel address space. This interface is invoked from the x86
architecture code that manages combined user and kernel page tables,
specifically before any kernel page table page is freed and reused.
This addresses the main issue with vfree() which is a common occurrence
and can be triggered by unprivileged users. While this resolves the
primary problem, it doesn't address some extremely rare case related to
memory unplug of memory that was present as reserved memory at boot, which
cannot be triggered by unprivileged users. The discussion can be found at
the link below.
Enable SVA on x86 architecture since the IOMMU can now receive
notification to flush the paging cache before freeing the CPU kernel page
table pages.
Link: https://lkml.kernel.org/r/20251022082635.2462433-9-baolu.lu@linux.intel.com
Link: https://lore.kernel.org/linux-iommu/04983c62-3b1d-40d4-93ae-34ca04b827e5@intel.com/
Co-developed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Suggested-by: Jann Horn <jannh@google.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jean-Philippe Brucker <jean-philippe@linaro.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robin Murohy <robin.murphy@arm.com>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: "Uladzislau Rezki (Sony)" <urezki@gmail.com>
Cc: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Cc: Yi Lai <yi1.lai@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This introduces a conditional asynchronous mechanism, enabled by
CONFIG_ASYNC_KERNEL_PGTABLE_FREE. When enabled, this mechanism defers the
freeing of pages that are used as page tables for kernel address mappings.
These pages are now queued to a work struct instead of being freed
immediately.
This deferred freeing allows for batch-freeing of page tables, providing a
safe context for performing a single expensive operation (TLB flush) for a
batch of kernel page tables instead of performing that expensive operation
for each page table.
Link: https://lkml.kernel.org/r/20251022082635.2462433-8-baolu.lu@linux.intel.com
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Jean-Philippe Brucker <jean-philippe@linaro.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robin Murohy <robin.murphy@arm.com>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: "Uladzislau Rezki (Sony)" <urezki@gmail.com>
Cc: Vasant Hegde <vasant.hegde@amd.com>
Cc: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Cc: Yi Lai <yi1.lai@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The pages used for ptdescs are currently freed back to the allocator in a
single location. They will shortly be freed from a second location.
Create a simple helper that just frees them back to the allocator.
Link: https://lkml.kernel.org/r/20251022082635.2462433-6-baolu.lu@linux.intel.com
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Jean-Philippe Brucker <jean-philippe@linaro.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robin Murohy <robin.murphy@arm.com>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: "Uladzislau Rezki (Sony)" <urezki@gmail.com>
Cc: Vasant Hegde <vasant.hegde@amd.com>
Cc: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Cc: Yi Lai <yi1.lai@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Now that the API is in place, mark kernel page table pages just after they
are allocated. Unmark them just before they are freed.
Note: Unconditionally clearing the 'kernel' marking (via
ptdesc_clear_kernel()) would be functionally identical to what is here.
But having the if() makes it logically clear that this function can be
used for kernel and non-kernel page tables.
Link: https://lkml.kernel.org/r/20251022082635.2462433-4-baolu.lu@linux.intel.com
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Jean-Philippe Brucker <jean-philippe@linaro.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robin Murohy <robin.murphy@arm.com>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: "Uladzislau Rezki (Sony)" <urezki@gmail.com>
Cc: Vasant Hegde <vasant.hegde@amd.com>
Cc: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Cc: Yi Lai <yi1.lai@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The page tables used to map the kernel and userspace often have very
different handling rules. There are frequently *_kernel() variants of
functions just for kernel page tables. That's not great and has lead to
code duplication.
Instead of having completely separate call paths, allow a 'ptdesc' to be
marked as being for kernel mappings. Introduce helpers to set and clear
this status.
Note: this uses the PG_referenced bit. Page flags are a great fit for
this since it is truly a single bit of information. Use PG_referenced
itself because it's a fairly benign flag (as opposed to things like
PG_lock). It's also (according to Willy) unlikely to go away any time
soon.
PG_referenced is not in PAGE_FLAGS_CHECK_AT_FREE. It does not need to be
cleared before freeing the page, and pages coming out of the allocator
should have it cleared. Regardless, introduce an API to clear it anyway.
Having symmetry in the API makes it easier to change the underlying
implementation later, like if there was a need to move to a
PAGE_FLAGS_CHECK_AT_FREE bit.
Link: https://lkml.kernel.org/r/20251022082635.2462433-3-baolu.lu@linux.intel.com
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Jean-Philippe Brucker <jean-philippe@linaro.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robin Murohy <robin.murphy@arm.com>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: "Uladzislau Rezki (Sony)" <urezki@gmail.com>
Cc: Vasant Hegde <vasant.hegde@amd.com>
Cc: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Cc: Yi Lai <yi1.lai@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
__memcg_memory_event() has been unnecessarily marked inline even when it
is not really performance critical. It is usually called to track extreme
conditions. Over the time, it has evolved to include more functionality
and inlining it is causing more harm.
Before the patch:
$ size mm/memcontrol.o net/ipv4/tcp_input.o net/ipv4/tcp_output.o
text data bss dec hex filename
35645 10574 4192 50411 c4eb mm/memcontrol.o
54738 1658 0 56396 dc4c net/ipv4/tcp_input.o
34644 1065 0 35709 8b7d net/ipv4/tcp_output.o
After the patch:
$ size mm/memcontrol.o net/ipv4/tcp_input.o net/ipv4/tcp_output.o
text data bss dec hex filename
35137 10446 4192 49775 c26f mm/memcontrol.o
54322 1562 0 55884 da4c net/ipv4/tcp_input.o
34492 1017 0 35509 8ab5 net/ipv4/tcp_output.o
[akpm@linux-foundation.org: use EXPORT_SYMBOL_GPL for __memcg_memory_event, per Michal and Christoph]
Link: https://lkml.kernel.org/r/20251021234425.1885471-1-shakeel.butt@linux.dev
Signed-off-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: SeongJae Park <sj@kernel.org>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add the ability to set up a shared anonymous mapping based on a VMA
descriptor rather than a VMA.
This is a prerequisite for converting to the char mm driver to use the
mmap_prepare hook.
Link: https://lkml.kernel.org/r/d9181517a7e3d6b014a5697c6990d3722c2c9fcd.1760959442.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Chatre, Reinette <reinette.chatre@intel.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Dave Martin <dave.martin@arm.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: James Morse <james.morse@arm.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicolas Pitre <nico@fluxnic.net>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Pedro Falcato <pfalcato@suse.de>
Cc: Robin Murohy <robin.murphy@arm.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: "Uladzislau Rezki (Sony)" <urezki@gmail.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
