| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[ Upstream commit 93022482b2948a9a7e9b5a2bb685f2e1cb4c3348 ]
Code in v6.9 arch/x86/kernel/smpboot.c was changed by commit
4db64279bc2b ("x86/cpu: Switch to new Intel CPU model defines") from:
static const struct x86_cpu_id intel_cod_cpu[] = {
X86_MATCH_INTEL_FAM6_MODEL(HASWELL_X, 0), /* COD */
X86_MATCH_INTEL_FAM6_MODEL(BROADWELL_X, 0), /* COD */
X86_MATCH_INTEL_FAM6_MODEL(ANY, 1), /* SNC */ <--- 443
{}
};
static bool match_llc(struct cpuinfo_x86 *c, struct cpuinfo_x86 *o)
{
const struct x86_cpu_id *id = x86_match_cpu(intel_cod_cpu);
to:
static const struct x86_cpu_id intel_cod_cpu[] = {
X86_MATCH_VFM(INTEL_HASWELL_X, 0), /* COD */
X86_MATCH_VFM(INTEL_BROADWELL_X, 0), /* COD */
X86_MATCH_VFM(INTEL_ANY, 1), /* SNC */
{}
};
static bool match_llc(struct cpuinfo_x86 *c, struct cpuinfo_x86 *o)
{
const struct x86_cpu_id *id = x86_match_cpu(intel_cod_cpu);
On an Intel CPU with SNC enabled this code previously matched the rule on line
443 to avoid printing messages about insane cache configuration. The new code
did not match any rules.
Expanding the macros for the intel_cod_cpu[] array shows that the old is
equivalent to:
static const struct x86_cpu_id intel_cod_cpu[] = {
[0] = { .vendor = 0, .family = 6, .model = 0x3F, .steppings = 0, .feature = 0, .driver_data = 0 },
[1] = { .vendor = 0, .family = 6, .model = 0x4F, .steppings = 0, .feature = 0, .driver_data = 0 },
[2] = { .vendor = 0, .family = 6, .model = 0x00, .steppings = 0, .feature = 0, .driver_data = 1 },
[3] = { .vendor = 0, .family = 0, .model = 0x00, .steppings = 0, .feature = 0, .driver_data = 0 }
}
while the new code expands to:
static const struct x86_cpu_id intel_cod_cpu[] = {
[0] = { .vendor = 0, .family = 6, .model = 0x3F, .steppings = 0, .feature = 0, .driver_data = 0 },
[1] = { .vendor = 0, .family = 6, .model = 0x4F, .steppings = 0, .feature = 0, .driver_data = 0 },
[2] = { .vendor = 0, .family = 0, .model = 0x00, .steppings = 0, .feature = 0, .driver_data = 1 },
[3] = { .vendor = 0, .family = 0, .model = 0x00, .steppings = 0, .feature = 0, .driver_data = 0 }
}
Looking at the code for x86_match_cpu():
const struct x86_cpu_id *x86_match_cpu(const struct x86_cpu_id *match)
{
const struct x86_cpu_id *m;
struct cpuinfo_x86 *c = &boot_cpu_data;
for (m = match;
m->vendor | m->family | m->model | m->steppings | m->feature;
m++) {
...
}
return NULL;
it is clear that there was no match because the ANY entry in the table (array
index 2) is now the loop termination condition (all of vendor, family, model,
steppings, and feature are zero).
So this code was working before because the "ANY" check was looking for any
Intel CPU in family 6. But fails now because the family is a wild card. So the
root cause is that x86_match_cpu() has never been able to match on a rule with
just X86_VENDOR_INTEL and all other fields set to wildcards.
Add a new flags field to struct x86_cpu_id that has a bit set to indicate that
this entry in the array is valid. Update X86_MATCH*() macros to set that bit.
Change the end-marker check in x86_match_cpu() to just check the flags field
for this bit.
Backporter notes: The commit in Fixes is really the one that is broken:
you can't have m->vendor as part of the loop termination conditional in
x86_match_cpu() because it can happen - as it has happened above
- that that whole conditional is 0 albeit vendor == 0 is a valid case
- X86_VENDOR_INTEL is 0.
However, the only case where the above happens is the SNC check added by
4db64279bc2b1 so you only need this fix if you have backported that
other commit
4db64279bc2b ("x86/cpu: Switch to new Intel CPU model defines")
Fixes: 644e9cbbe3fc ("Add driver auto probing for x86 features v4")
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable+noautosel@kernel.org> # see above
Link: https://lore.kernel.org/r/20240517144312.GBZkdtAOuJZCvxhFbJ@fat_crate.local
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 01c8f9806bde438ca1c8cbbc439f0a14a6694f6c upstream.
In kcov_remote_start()/kcov_remote_stop(), we swap the previous KCOV
metadata of the current task into a per-CPU variable. However, the
kcov_mode_enabled(mode) check is not sufficient in the case of remote KCOV
coverage: current->kcov_mode always remains KCOV_MODE_DISABLED for remote
KCOV objects.
If the original task that has invoked the KCOV_REMOTE_ENABLE ioctl happens
to get interrupted and kcov_remote_start() is called, it ultimately leads
to kcov_remote_stop() NOT restoring the original KCOV reference. So when
the task exits, all registered remote KCOV handles remain active forever.
The most uncomfortable effect (at least for syzkaller) is that the bug
prevents the reuse of the same /sys/kernel/debug/kcov descriptor. If
we obtain it in the parent process and then e.g. drop some
capabilities and continuously fork to execute individual programs, at
some point current->kcov of the forked process is lost,
kcov_task_exit() takes no action, and all KCOV_REMOTE_ENABLE ioctls
calls from subsequent forks fail.
And, yes, the efficiency is also affected if we keep on losing remote
kcov objects.
a) kcov_remote_map keeps on growing forever.
b) (If I'm not mistaken), we're also not freeing the memory referenced
by kcov->area.
Fix it by introducing a special kcov_mode that is assigned to the task
that owns a KCOV remote object. It makes kcov_mode_enabled() return true
and yet does not trigger coverage collection in __sanitizer_cov_trace_pc()
and write_comp_data().
[nogikh@google.com: replace WRITE_ONCE() with an ordinary assignment]
Link: https://lkml.kernel.org/r/20240614171221.2837584-1-nogikh@google.com
Link: https://lkml.kernel.org/r/20240611133229.527822-1-nogikh@google.com
Fixes: 5ff3b30ab57d ("kcov: collect coverage from interrupts")
Signed-off-by: Aleksandr Nogikh <nogikh@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Tested-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Marco Elver <elver@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 6bd23e0c2bb6c65d4f5754d1456bc9a4427fc59b ]
... and use it to limit the virtual terminals to just N_TTY. They are
kind of special, and in particular, the "con_write()" routine violates
the "writes cannot sleep" rule that some ldiscs rely on.
This avoids the
BUG: sleeping function called from invalid context at kernel/printk/printk.c:2659
when N_GSM has been attached to a virtual console, and gsmld_write()
calls con_write() while holding a spinlock, and con_write() then tries
to get the console lock.
Tested-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Daniel Starke <daniel.starke@siemens.com>
Reported-by: syzbot <syzbot+dbac96d8e73b61aa559c@syzkaller.appspotmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=dbac96d8e73b61aa559c
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20240423163339.59780-1-torvalds@linux-foundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 79d713baf63c8f23cc58b304c40be33d64a12aaf ]
In some APIs we would like to assign the special value to iotype
and compare against it in another places. Introduce UPIO_UNKNOWN
for this purpose.
Note, we can't use 0, because it's a valid value for IO port access.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240304123035.758700-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 87d80bfbd577 ("serial: 8250_dw: Don't use struct dw8250_data outside of 8250_dw")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 144ba8580bcb82b2686c3d1a043299d844b9a682 ]
ENOTSUPP is not a SUSV4 error code, prefer EOPNOTSUPP as reported by
checkpatch script.
Fixes: 18ff0bcda6d1 ("ethtool: add interface to interact with Ethernet Power Equipment")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://lore.kernel.org/r/20240610083426.740660-1-kory.maincent@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 373c612d72461ddaea223592df31e62c934aae61 ]
Add fwnode APIs for finding and getting I2C adapters, which will be
used by the SFP code. These are passed the fwnode corresponding to
the adapter, and return the I2C adapter. It is the responsibility of
the caller to find the appropriate fwnode.
We keep the DT and ACPI interfaces, but where appropriate, recode them
to use the fwnode interfaces internally.
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Stable-dep-of: 3f858bbf04db ("i2c: acpi: Unbind mux adapters before delete")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 3c2f8859ae1ce53f2a89c8e4ca4092101afbff67 upstream.
This was already defined locally by init/main.c, but let's make
it generic, as arch/x86/kernel/cpu/topology.c is going to make
use of it to have more uniform code.
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 63a7cd660246aa36af263b85c33ecc6601bf04be upstream.
Some mmc host drivers may need to fixup a card-detection GPIO's config
to e.g. enable the GPIO controllers builtin pull-up resistor on devices
where the firmware description of the GPIO is broken (e.g. GpioInt with
PullNone instead of PullUp in ACPI DSDT).
Since this is the exception rather then the rule adding a config
parameter to mmc_gpiod_request_cd() seems undesirable, so instead
add a new mmc_gpiod_set_cd_config() function. This is simply a wrapper
to call gpiod_set_config() on the card-detect GPIO acquired through
mmc_gpiod_request_cd().
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240410191639.526324-2-hdegoede@redhat.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit b7c0e1ecee403a43abc89eb3e75672b01ff2ece9 ]
The current implementation of the fpga region assumes that the low-level
module registers a driver for the parent device and uses its owner pointer
to take the module's refcount. This approach is problematic since it can
lead to a null pointer dereference while attempting to get the region
during programming if the parent device does not have a driver.
To address this problem, add a module owner pointer to the fpga_region
struct and use it to take the module's refcount. Modify the functions for
registering a region to take an additional owner module parameter and
rename them to avoid conflicts. Use the old function names for helper
macros that automatically set the module that registers the region as the
owner. This ensures compatibility with existing low-level control modules
and reduces the chances of registering a region without setting the owner.
Also, update the documentation to keep it consistent with the new interface
for registering an fpga region.
Fixes: 0fa20cdfcc1f ("fpga: fpga-region: device tree control for FPGA")
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Xu Yilun <yilun.xu@intel.com>
Reviewed-by: Russ Weight <russ.weight@linux.dev>
Signed-off-by: Marco Pagani <marpagan@redhat.com>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20240419083601.77403-1-marpagan@redhat.com
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 416bdb89605d960405178b9bf04df512d1ace1a3 ]
Remove the @priv: line to prevent the kernel-doc warning:
include/linux/counter.h:400: warning: Excess struct member 'priv' description in 'counter_device'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Fixes: f2ee4759fb70 ("counter: remove old and now unused registration API")
Link: https://lore.kernel.org/r/20231223050511.13849-1-rdunlap@infradead.org
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1fb2d41501f38192d8a19da585cd441cf8845697 ]
pskb_may_pull() can fail for two different reasons.
Provide pskb_may_pull_reason() helper to distinguish
between these reasons.
It returns:
SKB_NOT_DROPPED_YET : Success
SKB_DROP_REASON_PKT_TOO_SMALL : packet too small
SKB_DROP_REASON_NOMEM : skb->head could not be resized
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 8bd67ebb50c0 ("net: bridge: xmit: make sure we have at least eth header len bytes")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c26ec799042a3888935d59b599f33e41efedf5f8 ]
When printk-indexing is enabled, each dev_printk() invocation emits a
pi_entry structure. This is even true when the dev_printk() is
protected by an always-false check, as is typically the case for debug
messages: while the actual code to print the message is optimized out by
the compiler, the pi_entry structure is still emitted.
Avoid emitting pi_entry structures for unavailable dev_printk() kernel
messages by:
1. Introducing a dev_no_printk() helper, mimicked after the existing
no_printk() helper, which calls _dev_printk() instead of
dev_printk(),
2. Replacing all "if (0) dev_printk(...)" constructs by calls to the
new helper.
This reduces the size of an arm64 defconfig kernel with
CONFIG_PRINTK_INDEX=y by 957 KiB.
Fixes: ad7d61f159db7397 ("printk: index: Add indexing support to dev_printk")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Chris Down <chris@chrisdown.name>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/8583d54f1687c801c6cda8edddf2cf0344c6e883.1709127473.git.geert+renesas@glider.be
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8522f6b760ca588928eede740d5d69dd1e936b49 ]
When printk-indexing is enabled, each printk() invocation emits a
pi_entry structure, containing the format string and other information
related to its location in the kernel sources. This is even true for
no_printk(): while the actual code to print the message is optimized out
by the compiler due to the always-false check, the pi_entry structure is
still emitted.
As the main purpose of no_printk() is to provide a helper to maintain
printf()-style format checking when debugging is disabled, this leads to
the inclusion in the index of lots of printk formats that cannot be
emitted by the current kernel.
Fix this by switching no_printk() from printk() to _printk().
This reduces the size of an arm64 defconfig kernel with
CONFIG_PRINTK_INDEX=y by 576 KiB.
Fixes: 337015573718b161 ("printk: Userspace format indexing support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Chris Down <chris@chrisdown.name>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/56cf92edccffea970e1f40a075334dd6cf5bb2a4.1709127473.git.geert+renesas@glider.be
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 485d65e1357123a697c591a5aeb773994b247ad7 ]
Prevent forced completion handling on an entry that has not yet been
assigned an index, causing an out of bounds access on idx = -22.
Instead of waiting indefinitely for the sem, blocking flow now waits for
index to be allocated or a sem acquisition timeout before beginning the
timer for FW completion.
Kernel log example:
mlx5_core 0000:06:00.0: wait_func_handle_exec_timeout:1128:(pid 185911): cmd[-22]: CREATE_UCTX(0xa04) No done completion
Fixes: 8e715cd613a1 ("net/mlx5: Set command entry semaphore up once got index free")
Signed-off-by: Akiva Goldberger <agoldberger@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20240509112951.590184-5-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f9f67e5adc8dc2e1cc51ab2d3d6382fa97f074d4 ]
For configurations that have the kconfig option NUMA_KEEP_MEMINFO
disabled, numa_fill_memblks() only returns with NUMA_NO_MEMBLK (-1).
SRAT lookup fails then because an existing SRAT memory range cannot be
found for a CFMWS address range. This causes the addition of a
duplicate numa_memblk with a different node id and a subsequent page
fault and kernel crash during boot.
Fix this by making numa_fill_memblks() always available regardless of
NUMA_KEEP_MEMINFO.
As Dan suggested, the fix is implemented to remove numa_fill_memblks()
from sparsemem.h and alos using __weak for the function.
Note that the issue was initially introduced with [1]. But since
phys_to_target_node() was originally used that returned the valid node
0, an additional numa_memblk was not added. Though, the node id was
wrong too, a message is seen then in the logs:
kernel/numa.c: pr_info_once("Unknown target node for memory at 0x%llx, assuming node 0\n",
[1] commit fd49f99c1809 ("ACPI: NUMA: Add a node and memblk for each
CFMWS not in SRAT")
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/all/66271b0072317_69102944c@dwillia2-xfh.jf.intel.com.notmuch/
Fixes: 8f1004679987 ("ACPI/NUMA: Apply SRAT proximity domain to entire CFMWS window")
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d7a73e3f089204aee3393687e23fd45a22657b08 ]
Moving these stub functions to a .c file means we can kill a sched.h
dependency on printk.h.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Stable-dep-of: f9f67e5adc8d ("x86/numa: Fix SRAT lookup of CFMWS ranges with numa_fill_memblks()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 72cc1980a0ef3ccad0d539e7dace63d0d7d432a4 ]
Commit 8238b4579866 ("wait_on_bit: add an acquire memory barrier") added
a new bitop, test_bit_acquire(), with proper wrapping in order to try to
optimize it at compile-time, but missed the list of bitops used for
checking their prototypes a bit below.
The functions added have consistent prototypes, so that no more changes
are required and no functional changes take place.
Fixes: 8238b4579866 ("wait_on_bit: add an acquire memory barrier")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d0d4f1474e36b195eaad477373127ae621334c01 ]
The ACPI spec says bit 17 should be used to indicate support
for Generic Initiator Affinity Structure in SRAT, but we currently
set bit 13 ("Interrupt ResourceSource support").
Fix this by actually setting bit 17 when evaluating _OSC.
Fixes: 01aabca2fd54 ("ACPI: Let ACPI know we support Generic Initiator Affinity Structures")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d7b64041164ca177170191d2ad775da074ab2926 ]
A recent multithreaded write data corruption has been uncovered in
the iomap write code. The core of the problem is partial folio
writes can be flushed to disk while a new racing write can map it
and fill the rest of the page:
writeback new write
allocate blocks
blocks are unwritten
submit IO
.....
map blocks
iomap indicates UNWRITTEN range
loop {
lock folio
copyin data
.....
IO completes
runs unwritten extent conv
blocks are marked written
<iomap now stale>
get next folio
}
Now add memory pressure such that memory reclaim evicts the
partially written folio that has already been written to disk.
When the new write finally gets to the last partial page of the new
write, it does not find it in cache, so it instantiates a new page,
sees the iomap is unwritten, and zeros the part of the page that
it does not have data from. This overwrites the data on disk that
was originally written.
The full description of the corruption mechanism can be found here:
https://lore.kernel.org/linux-xfs/20220817093627.GZ3600936@dread.disaster.area/
To solve this problem, we need to check whether the iomap is still
valid after we lock each folio during the write. We have to do it
after we lock the page so that we don't end up with state changes
occurring while we wait for the folio to be locked.
Hence we need a mechanism to be able to check that the cached iomap
is still valid (similar to what we already do in buffered
writeback), and we need a way for ->begin_write to back out and
tell the high level iomap iterator that we need to remap the
remaining write range.
The iomap needs to grow some storage for the validity cookie that
the filesystem provides to travel with the iomap. XFS, in
particular, also needs to know some more information about what the
iomap maps (attribute extents rather than file data extents) to for
the validity cookie to cover all the types of iomaps we might need
to validate.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 9c7babf94a0d686b552e53aded8d4703d1b8b92b ]
Because that's what Christoph wants for this error handling path
only XFS uses.
It requires a new iomap export for handling errors over delalloc
ranges. This is basically the XFS code as is stands, but even though
Christoph wants this as iomap funcitonality, we still have
to call it from the filesystem specific ->iomap_end callback, and
call into the iomap code with yet another filesystem specific
callback to punch the delalloc extent within the defined ranges.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 07a57a338adb6ec9e766d6a6790f76527f45ceb5 upstream.
Tony reported that the Machine check recovery was broken in v6.9-rc1, as
he was hitting a VM_BUG_ON when injecting uncorrectable memory errors to
DRAM.
After some more digging and debugging on his side, he realized that this
went back to v6.1, with the introduction of 'commit 0d206b5d2e0d
("mm/swap: add swp_offset_pfn() to fetch PFN from swap entry")'. That
commit, among other things, introduced swp_offset_pfn(), replacing
hwpoison_entry_to_pfn() in its favour.
The patch also introduced a VM_BUG_ON() check for is_pfn_swap_entry(), but
is_pfn_swap_entry() never got updated to cover hwpoison entries, which
means that we would hit the VM_BUG_ON whenever we would call
swp_offset_pfn() for such entries on environments with CONFIG_DEBUG_VM
set. Fix this by updating the check to cover hwpoison entries as well,
and update the comment while we are it.
Link: https://lkml.kernel.org/r/20240407130537.16977-1-osalvador@suse.de
Fixes: 0d206b5d2e0d ("mm/swap: add swp_offset_pfn() to fetch PFN from swap entry")
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Reported-by: Tony Luck <tony.luck@intel.com>
Closes: https://lore.kernel.org/all/Zg8kLSl2yAlA3o5D@agluck-desk3/
Tested-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: <stable@vger.kernel.org> [6.1.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 95feb3160eef0caa6018e175a5560b816aee8e79 upstream.
Due to an erratum with the SPR_DSA and SPR_IAX devices, it is not secure to assign
these devices to virtual machines. Add the PCI IDs of these devices to the VFIO
denylist to ensure that this is handled appropriately by the VFIO subsystem.
The SPR_DSA and SPR_IAX devices are on-SOC devices for the Sapphire Rapids
(and related) family of products that perform data movement and compression.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 90d1f14cbb9ddbfc532e2da13bf6e0ed8320e792 upstream.
It turned out that KMSAN instruments READ_ONCE_NOCHECK(), resulting in
false positive reports, because __no_sanitize_or_inline enforced inlining.
Properly declare __no_sanitize_or_inline under __SANITIZE_MEMORY__, so
that it does not __always_inline the annotated function.
Link: https://lkml.kernel.org/r/20240426091622.3846771-1-glider@google.com
Fixes: 5de0ce85f5a4 ("kmsan: mark noinstr as __no_sanitize_memory")
Signed-off-by: Alexander Potapenko <glider@google.com>
Reported-by: syzbot+355c5bb8c1445c871ee8@syzkaller.appspotmail.com
Link: https://lkml.kernel.org/r/000000000000826ac1061675b0e3@google.com
Cc: <stable@vger.kernel.org>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit cd7eb8f83fcf258f71e293f7fc52a70be8ed0128 upstream.
Currently, if an automatically freed allocation is an error pointer that
will lead to a crash. An example of this is in wm831x_gpio_dbg_show().
171 char *label __free(kfree) = gpiochip_dup_line_label(chip, i);
172 if (IS_ERR(label)) {
173 dev_err(wm831x->dev, "Failed to duplicate label\n");
174 continue;
175 }
The auto clean up function should check for error pointers as well,
otherwise we're going to keep hitting issues like this.
Fixes: 54da6a092431 ("locking: Introduce __cleanup() based infrastructure")
Cc: <stable@vger.kernel.org>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3628e0383dd349f02f882e612ab6184e4bb3dc10 upstream.
This reverts commit 07ed11afb68d94eadd4ffc082b97c2331307c5ea.
Stephen Rostedt reports:
"I went to run my tests on my VMs and the tests hung on boot up.
Unfortunately, the most I ever got out was:
[ 93.607888] Testing event system initcall: OK
[ 93.667730] Running tests on all trace events:
[ 93.669757] Testing all events: OK
[ 95.631064] ------------[ cut here ]------------
Timed out after 60 seconds"
and further debugging points to a possible circular locking dependency
between the console_owner locking and the worker pool locking.
Reverting the commit allows Steve's VM to boot to completion again.
[ This may obviously result in the "[TTM] Buffer eviction failed"
messages again, which was the reason for that original revert. But at
this point this seems preferable to a non-booting system... ]
Reported-and-bisected-by: Steven Rostedt <rostedt@goodmis.org>
Link: https://lore.kernel.org/all/20240502081641.457aa25f@gandalf.local.home/
Acked-by: Maxime Ripard <mripard@kernel.org>
Cc: Alex Constantino <dreaming.about.electric.sheep@gmail.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Timo Lindfors <timo.lindfors@iki.fi>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit bb663f0f3c396c6d05f6c5eeeea96ced20ff112e ]
The timer related functions do not have a strict timer_ prefixed namespace
which is really annoying.
Rename del_timer() to timer_delete() and provide del_timer()
as a wrapper. Document that del_timer() is not for new code.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Link: https://lore.kernel.org/r/20221123201625.015535022@linutronix.de
Stable-dep-of: 4893b8b3ef8d ("hsr: Simplify code for announcing HSR nodes timer setup")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9a5a305686971f4be10c6d7251c8348d74b3e014 ]
del_singleshot_timer_sync() used to be an optimization for deleting timers
which are not rearmed from the timer callback function.
This optimization turned out to be broken and got mapped to
del_timer_sync() about 17 years ago.
Get rid of the undocumented indirection and use del_timer_sync() directly.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Link: https://lore.kernel.org/r/20221123201624.706987932@linutronix.de
Stable-dep-of: 4893b8b3ef8d ("hsr: Simplify code for announcing HSR nodes timer setup")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 58fbfecab965014b6e3cc956a76b4a96265a1add ]
The software GRO path for esp transport mode uses skb_mac_header_rebuild
prior to re-injecting the packet via the xfrm_napi_dev. This only
copies skb->mac_len bytes of header which may not be sufficient if the
packet contains 802.1Q tags or other VLAN tags. Worse copying only the
initial header will leave a packet marked as being VLAN tagged but
without the corresponding tag leading to mangling when it is later
untagged.
The VLAN tags are important when receiving the decrypted esp transport
mode packet after GRO processing to ensure it is received on the correct
interface.
Therefore record the full mac header length in xfrm*_transport_input for
later use in corresponding xfrm*_transport_finish to copy the entire mac
header when rebuilding the mac header for GRO. The skb->data pointer is
left pointing skb->mac_header bytes after the start of the mac header as
is expected by the network stack and network and transport header
offsets reset to this location.
Fixes: 7785bba299a8 ("esp: Add a software GRO codepath")
Signed-off-by: Paul Davey <paul.davey@alliedtelesis.co.nz>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6c6871cdaef96361f6b79a3e45d451a6475df4d6 ]
Mixing SPI slave/target handlers and SPI slave/target controllers using
legacy and modern naming does not work well: there are now two different
callbacks for aborting a slave/target operation, of which only one is
populated, while spi_{slave,target}_abort() check and use only one,
which may be the unpopulated one.
Fix this by merging the slave/target abort callbacks into a single
callback using a union, like is already done for the slave/target flags.
Fixes: b8d3b056a78dcc94 ("spi: introduce new helpers with using modern naming")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/809c82d54b85dd87ef7ee69fc93016085be85cec.1667555967.git.geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 211f514ebf1ef5de37b1cf6df9d28a56cfd242ca ]
In CoCo VMs it is possible for the untrusted host to cause
set_memory_encrypted() or set_memory_decrypted() to fail such that an
error is returned and the resulting memory is shared. Callers need to
take care to handle these errors to avoid returning decrypted (shared)
memory to the page allocator, which could lead to functional or security
issues.
In order to make sure callers of vmbus_establish_gpadl() and
vmbus_teardown_gpadl() don't return decrypted/shared pages to
allocators, add a field in struct vmbus_gpadl to keep track of the
decryption status of the buffers. This will allow the callers to
know if they should free or leak the pages.
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Link: https://lore.kernel.org/r/20240311161558.1310-3-mhklinux@outlook.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20240311161558.1310-3-mhklinux@outlook.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 592447f6cb3c20d606d6c5d8e6af68e99707b786 ]
commit 772dd0342727 ("mm: enumerate all gfp flags") define gfp flags
with the help of BIT, while gfp_types.h doesn't include header file for
the definition. This through an error on building memblock tests.
Let's include linux/bits.h to fix it.
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
CC: Suren Baghdasaryan <surenb@google.com>
CC: Michal Hocko <mhocko@suse.com>
Link: https://lore.kernel.org/r/20240402132701.29744-4-richard.weiyang@gmail.com
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b8d3b056a78dcc941fd1a117697ab2b956c2953f ]
For using modern names host/target to instead of all the legacy names,
I think it takes 3 steps:
- step1: introduce new helpers with modern naming.
- step2: switch to use these new helpers in all drivers.
- step3: remove all legacy helpers and update all legacy names.
This patch is for step1, it introduces new helpers with host/target
naming for drivers using.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221011092204.950288-1-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: 0064db9ce4aa ("spi: axi-spi-engine: fix version format string")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6648e613226e18897231ab5e42ffc29e63fa3365 ]
Fix NULL pointer data-races in sk_psock_skb_ingress_enqueue() which
syzbot reported [1].
[1]
BUG: KCSAN: data-race in sk_psock_drop / sk_psock_skb_ingress_enqueue
write to 0xffff88814b3278b8 of 8 bytes by task 10724 on cpu 1:
sk_psock_stop_verdict net/core/skmsg.c:1257 [inline]
sk_psock_drop+0x13e/0x1f0 net/core/skmsg.c:843
sk_psock_put include/linux/skmsg.h:459 [inline]
sock_map_close+0x1a7/0x260 net/core/sock_map.c:1648
unix_release+0x4b/0x80 net/unix/af_unix.c:1048
__sock_release net/socket.c:659 [inline]
sock_close+0x68/0x150 net/socket.c:1421
__fput+0x2c1/0x660 fs/file_table.c:422
__fput_sync+0x44/0x60 fs/file_table.c:507
__do_sys_close fs/open.c:1556 [inline]
__se_sys_close+0x101/0x1b0 fs/open.c:1541
__x64_sys_close+0x1f/0x30 fs/open.c:1541
do_syscall_64+0xd3/0x1d0
entry_SYSCALL_64_after_hwframe+0x6d/0x75
read to 0xffff88814b3278b8 of 8 bytes by task 10713 on cpu 0:
sk_psock_data_ready include/linux/skmsg.h:464 [inline]
sk_psock_skb_ingress_enqueue+0x32d/0x390 net/core/skmsg.c:555
sk_psock_skb_ingress_self+0x185/0x1e0 net/core/skmsg.c:606
sk_psock_verdict_apply net/core/skmsg.c:1008 [inline]
sk_psock_verdict_recv+0x3e4/0x4a0 net/core/skmsg.c:1202
unix_read_skb net/unix/af_unix.c:2546 [inline]
unix_stream_read_skb+0x9e/0xf0 net/unix/af_unix.c:2682
sk_psock_verdict_data_ready+0x77/0x220 net/core/skmsg.c:1223
unix_stream_sendmsg+0x527/0x860 net/unix/af_unix.c:2339
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x140/0x180 net/socket.c:745
____sys_sendmsg+0x312/0x410 net/socket.c:2584
___sys_sendmsg net/socket.c:2638 [inline]
__sys_sendmsg+0x1e9/0x280 net/socket.c:2667
__do_sys_sendmsg net/socket.c:2676 [inline]
__se_sys_sendmsg net/socket.c:2674 [inline]
__x64_sys_sendmsg+0x46/0x50 net/socket.c:2674
do_syscall_64+0xd3/0x1d0
entry_SYSCALL_64_after_hwframe+0x6d/0x75
value changed: 0xffffffff83d7feb0 -> 0x0000000000000000
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 10713 Comm: syz-executor.4 Tainted: G W 6.8.0-syzkaller-08951-gfe46a7dd189e #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/29/2024
Prior to this, commit 4cd12c6065df ("bpf, sockmap: Fix NULL pointer
dereference in sk_psock_verdict_data_ready()") fixed one NULL pointer
similarly due to no protection of saved_data_ready. Here is another
different caller causing the same issue because of the same reason. So
we should protect it with sk_callback_lock read lock because the writer
side in the sk_psock_drop() uses "write_lock_bh(&sk->sk_callback_lock);".
To avoid errors that could happen in future, I move those two pairs of
lock into the sk_psock_data_ready(), which is suggested by John Fastabend.
Fixes: 604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface")
Reported-by: syzbot+aa8c8ec2538929f18f2d@syzkaller.appspotmail.com
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=aa8c8ec2538929f18f2d
Link: https://lore.kernel.org/all/20240329134037.92124-1-kerneljasonxing@gmail.com
Link: https://lore.kernel.org/bpf/20240404021001.94815-1-kerneljasonxing@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ff33132605c1a0acea59e4c523cb7c6fabe856b2 ]
The devm_regulator_get_enable_optional() should be a 'call and forget'
API, meaning, when it is used to enable the regulators, the API does not
provide a handle to do any further control of the regulators. It gives
no real benefit to return an error from the stub if CONFIG_REGULATOR is
not set.
On the contrary, returning an error is causing problems to drivers when
hardware is such it works out just fine with no regulator control.
Returning an error forces drivers to specifically handle the case where
CONFIG_REGULATOR is not set, making the mere existence of the stub
questionalble.
Change the stub implementation for the
devm_regulator_get_enable_optional() to return Ok so drivers do not
separately handle the case where the CONFIG_REGULATOR is not set.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Fixes: da279e6965b3 ("regulator: Add devm helpers for get and enable")
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/ZiedtOE00Zozd3XO@fedora
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 96e20adc43c4f81e9163a5188cee75a6dd393e09 ]
The devm_regulator_get_enable() should be a 'call and forget' API,
meaning, when it is used to enable the regulators, the API does not
provide a handle to do any further control of the regulators. It gives
no real benefit to return an error from the stub if CONFIG_REGULATOR is
not set.
On the contrary, returning and error is causing problems to drivers when
hardware is such it works out just fine with no regulator control.
Returning an error forces drivers to specifically handle the case where
CONFIG_REGULATOR is not set, making the mere existence of the stub
questionalble. Furthermore, the stub of the regulator_enable() seems to
be returning Ok.
Change the stub implementation for the devm_regulator_get_enable() to
return Ok so drivers do not separately handle the case where the
CONFIG_REGULATOR is not set.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reported-by: Aleksander Mazur <deweloper@wp.pl>
Suggested-by: Guenter Roeck <linux@roeck-us.net>
Fixes: da279e6965b3 ("regulator: Add devm helpers for get and enable")
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/ZiYF6d1V1vSPcsJS@drtxq0yyyyyyyyyyyyyby-3.rev.dnainternet.fi
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 443a0a0f0cf4f432c7af6654b7f2f920d411d379 ]
There are many pin control drivers define their own data type for
pin function representation which is the same or embed the same data
as newly introduced one. Provide the data type and convenient macro
for all pin control drivers.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Stable-dep-of: fed6d9a8e6a6 ("pinctrl: baytrail: Fix selecting gpio pinctrl state")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2057a48d0dd00c6a2a94ded7df2bf1d3f2a4a0da ]
We want to be able to have our rpc stats handled in a per network
namespace manner, so add an option to rpc_create_args to specify a
different rpc_stats struct instead of using the one on the rpc_program.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Stable-dep-of: 24457f1be29f ("nfs: Handle error of rpc_proc_register() in nfs_net_init().")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d4ab0316cc33aeedf6dcb1c2c25e097a25766132 ]
Continue to use a folio inside free_huge_page() by converting
hugetlb_cgroup_uncharge_page*() to folios.
Link: https://lkml.kernel.org/r/20221101223059.460937-8-sidhartha.kumar@oracle.com
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Bui Quang Minh <minhquangbui99@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Mina Almasry <almasrymina@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: b76b46902c2d ("mm/hugetlb: fix missing hugetlb_lock for resv uncharge")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f074732d599e19a2a5b12e54743ad5eaccbe6550 ]
Introduce folios in __remove_hugetlb_page() by converting
hugetlb_cgroup_from_page() to use folios.
Also gets rid of unsed hugetlb_cgroup_from_page_resv() function.
Link: https://lkml.kernel.org/r/20221101223059.460937-3-sidhartha.kumar@oracle.com
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Bui Quang Minh <minhquangbui99@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mina Almasry <almasrymina@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: b76b46902c2d ("mm/hugetlb: fix missing hugetlb_lock for resv uncharge")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a098c977722ca27d3b4bfeb966767af3cce45f85 ]
Patch series "convert hugetlb_cgroup helper functions to folios", v2.
This patch series continues the conversion of hugetlb code from being
managed in pages to folios by converting many of the hugetlb_cgroup helper
functions to use folios. This allows the core hugetlb functions to pass
in a folio to these helper functions.
This patch (of 9);
Change __set_hugetlb_cgroup() to use folios so it is explicit that the
function operates on a head page.
Link: https://lkml.kernel.org/r/20221101223059.460937-1-sidhartha.kumar@oracle.com
Link: https://lkml.kernel.org/r/20221101223059.460937-2-sidhartha.kumar@oracle.com
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Bui Quang Minh <minhquangbui99@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Mina Almasry <almasrymina@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: b76b46902c2d ("mm/hugetlb: fix missing hugetlb_lock for resv uncharge")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e51da3a9b6c2f67879880259a25c51dbda01c462 ]
Helper function to retrieve hstate information from a hugetlb folio.
Link: https://lkml.kernel.org/r/20220922154207.1575343-6-sidhartha.kumar@oracle.com
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Colin Cross <ccross@google.com>
Cc: David Howells <dhowells@redhat.com>
Cc: "Eric W . Biederman" <ebiederm@xmission.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: William Kucharski <william.kucharski@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: b76b46902c2d ("mm/hugetlb: fix missing hugetlb_lock for resv uncharge")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 149562f7509404c382c32c3fa8a6ba356135e5cf ]
Allow hugetlbfs_migrate_folio to check and read subpool information by
passing in a folio.
Link: https://lkml.kernel.org/r/20220922154207.1575343-4-sidhartha.kumar@oracle.com
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Colin Cross <ccross@google.com>
Cc: David Howells <dhowells@redhat.com>
Cc: "Eric W . Biederman" <ebiederm@xmission.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: kernel test robot <lkp@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: William Kucharski <william.kucharski@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: b76b46902c2d ("mm/hugetlb: fix missing hugetlb_lock for resv uncharge")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d340625f4849ab5dbfebbc7d84709fbfcd39e52f ]
Allow struct folio to store hugetlb metadata that is contained in the
private field of the first tail page. On 32-bit, _private_1 aligns with
page[1].private.
Link: https://lkml.kernel.org/r/20220922154207.1575343-3-sidhartha.kumar@oracle.com
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Acked-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Colin Cross <ccross@google.com>
Cc: David Howells <dhowells@redhat.com>
Cc: "Eric W . Biederman" <ebiederm@xmission.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: kernel test robot <lkp@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: William Kucharski <william.kucharski@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: b76b46902c2d ("mm/hugetlb: fix missing hugetlb_lock for resv uncharge")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d03c376d9066532551dc56837c7c5490e4fcbbfe ]
Patch series "begin converting hugetlb code to folios", v4.
This patch series starts the conversion of the hugetlb code to operate on
struct folios rather than struct pages. This removes the ambiguitiy of
whether functions are operating on head pages, tail pages of compound
pages, or base pages.
This series passes the linux test project hugetlb test cases.
Patch 1 adds hugeltb specific page macros that can operate on folios.
Patch 2 adds the private field of the first tail page to struct page. For
32-bit, _private_1 alinging with page[1].private was confirmed by using
pahole.
Patch 3 introduces hugetlb subpool helper functions which operate on
struct folios. These patches were tested using the hugepage-mmap.c
selftest along with the migratepages command.
Patch 4 converts hugetlb_delete_from_page_cache() to use folios.
Patch 5 adds a folio_hstate() function to get hstate information from a
folio and adds a user of folio_hstate().
Bpftrace was used to track time spent in the free_huge_pages function
during the ltp test cases as it is a caller of the hugetlb subpool
functions. From the histogram, the performance is similar before and
after the patch series.
Time spent in 'free_huge_page'
6.0.0-rc2.master.20220823
@nsecs:
[256, 512) 14770 |@@@@@@@@@@@@@@@@@@@@@@@@@@@
|@@@@@@@@@@@@@@@@@@@@@@@@@ |
[512, 1K) 155 | |
[1K, 2K) 169 | |
[2K, 4K) 50 | |
[4K, 8K) 14 | |
[8K, 16K) 3 | |
[16K, 32K) 3 | |
6.0.0-rc2.master.20220823 + patch series
@nsecs:
[256, 512) 13678 |@@@@@@@@@@@@@@@@@@@@@@@@@@@ |
|@@@@@@@@@@@@@@@@@@@@@@@@@ |
[512, 1K) 142 | |
[1K, 2K) 199 | |
[2K, 4K) 44 | |
[4K, 8K) 13 | |
[8K, 16K) 4 | |
[16K, 32K) 1 | |
This patch (of 5):
Allow the macros which test, set, and clear hugetlb specific page flags to
take a hugetlb folio as an input. The macrros are generated as
folio_{test, set, clear}_hugetlb_{restore_reserve, migratable, temporary,
freed, vmemmap_optimized, raw_hwp_unreliable}.
Link: https://lkml.kernel.org/r/20220922154207.1575343-1-sidhartha.kumar@oracle.com
Link: https://lkml.kernel.org/r/20220922154207.1575343-2-sidhartha.kumar@oracle.com
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Colin Cross <ccross@google.com>
Cc: David Howells <dhowells@redhat.com>
Cc: "Eric W . Biederman" <ebiederm@xmission.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: kernel test robot <lkp@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: William Kucharski <william.kucharski@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: b76b46902c2d ("mm/hugetlb: fix missing hugetlb_lock for resv uncharge")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
match device address
commit 6e159fd653d7ebf6290358e0330a0cb8a75cf73b upstream.
Enable reuse of logic in eth_type_trans for determining packet type.
Suggested-by: Sabrina Dubroca <sd@queasysnail.net>
Cc: stable@vger.kernel.org
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/20240423181319.115860-3-rrameshbabu@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1e560864159d002b453da42bd2c13a1805515a20 upstream.
A last minute revert in 6.7-final introduced a potential deadlock when
enabling ASPM during probe of Qualcomm PCIe controllers as reported by
lockdep:
============================================
WARNING: possible recursive locking detected
6.7.0 #40 Not tainted
--------------------------------------------
kworker/u16:5/90 is trying to acquire lock:
ffffacfa78ced000 (pci_bus_sem){++++}-{3:3}, at: pcie_aspm_pm_state_change+0x58/0xdc
but task is already holding lock:
ffffacfa78ced000 (pci_bus_sem){++++}-{3:3}, at: pci_walk_bus+0x34/0xbc
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(pci_bus_sem);
lock(pci_bus_sem);
*** DEADLOCK ***
Call trace:
print_deadlock_bug+0x25c/0x348
__lock_acquire+0x10a4/0x2064
lock_acquire+0x1e8/0x318
down_read+0x60/0x184
pcie_aspm_pm_state_change+0x58/0xdc
pci_set_full_power_state+0xa8/0x114
pci_set_power_state+0xc4/0x120
qcom_pcie_enable_aspm+0x1c/0x3c [pcie_qcom]
pci_walk_bus+0x64/0xbc
qcom_pcie_host_post_init_2_7_0+0x28/0x34 [pcie_qcom]
The deadlock can easily be reproduced on machines like the Lenovo ThinkPad
X13s by adding a delay to increase the race window during asynchronous
probe where another thread can take a write lock.
Add a new pci_set_power_state_locked() and associated helper functions that
can be called with the PCI bus semaphore held to avoid taking the read lock
twice.
Link: https://lore.kernel.org/r/ZZu0qx2cmn7IwTyQ@hovoldconsulting.com
Link: https://lore.kernel.org/r/20240130100243.11011-1-johan+linaro@kernel.org
Fixes: f93e71aea6c6 ("Revert "PCI/ASPM: Remove pcie_aspm_pm_state_change()"")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: <stable@vger.kernel.org> # 6.7
[bhelgaas: backported to v6.1.y, which contains b9c370b61d73 ("Revert
"PCI/ASPM: Remove pcie_aspm_pm_state_change()""), a backport of
f93e71aea6c6. This omits the drivers/pci/controller/dwc/pcie-qcom.c hunk
that updates qcom_pcie_enable_aspm(), which was added by 9f4f3dfad8cf
("PCI: qcom: Enable ASPM for platforms supporting 1.9.0 ops"), which is not
present in v6.1.87.]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 89f9a1e876b5a7ad884918c03a46831af202c8a0 upstream.
On the time to free xbc memory in xbc_exit(), memblock may has handed
over memory to buddy allocator. So it doesn't make sense to free memory
back to memblock. memblock_free() called by xbc_exit() even causes UAF bugs
on architectures with CONFIG_ARCH_KEEP_MEMBLOCK disabled like x86.
Following KASAN logs shows this case.
This patch fixes the xbc memory free problem by calling memblock_free()
in early xbc init error rewind path and calling memblock_free_late() in
xbc exit path to free memory to buddy allocator.
[ 9.410890] ==================================================================
[ 9.418962] BUG: KASAN: use-after-free in memblock_isolate_range+0x12d/0x260
[ 9.426850] Read of size 8 at addr ffff88845dd30000 by task swapper/0/1
[ 9.435901] CPU: 9 PID: 1 Comm: swapper/0 Tainted: G U 6.9.0-rc3-00208-g586b5dfb51b9 #5
[ 9.446403] Hardware name: Intel Corporation RPLP LP5 (CPU:RaptorLake)/RPLP LP5 (ID:13), BIOS IRPPN02.01.01.00.00.19.015.D-00000000 Dec 28 2023
[ 9.460789] Call Trace:
[ 9.463518] <TASK>
[ 9.465859] dump_stack_lvl+0x53/0x70
[ 9.469949] print_report+0xce/0x610
[ 9.473944] ? __virt_addr_valid+0xf5/0x1b0
[ 9.478619] ? memblock_isolate_range+0x12d/0x260
[ 9.483877] kasan_report+0xc6/0x100
[ 9.487870] ? memblock_isolate_range+0x12d/0x260
[ 9.493125] memblock_isolate_range+0x12d/0x260
[ 9.498187] memblock_phys_free+0xb4/0x160
[ 9.502762] ? __pfx_memblock_phys_free+0x10/0x10
[ 9.508021] ? mutex_unlock+0x7e/0xd0
[ 9.512111] ? __pfx_mutex_unlock+0x10/0x10
[ 9.516786] ? kernel_init_freeable+0x2d4/0x430
[ 9.521850] ? __pfx_kernel_init+0x10/0x10
[ 9.526426] xbc_exit+0x17/0x70
[ 9.529935] kernel_init+0x38/0x1e0
[ 9.533829] ? _raw_spin_unlock_irq+0xd/0x30
[ 9.538601] ret_from_fork+0x2c/0x50
[ 9.542596] ? __pfx_kernel_init+0x10/0x10
[ 9.547170] ret_from_fork_asm+0x1a/0x30
[ 9.551552] </TASK>
[ 9.555649] The buggy address belongs to the physical page:
[ 9.561875] page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x1 pfn:0x45dd30
[ 9.570821] flags: 0x200000000000000(node=0|zone=2)
[ 9.576271] page_type: 0xffffffff()
[ 9.580167] raw: 0200000000000000 ffffea0011774c48 ffffea0012ba1848 0000000000000000
[ 9.588823] raw: 0000000000000001 0000000000000000 00000000ffffffff 0000000000000000
[ 9.597476] page dumped because: kasan: bad access detected
[ 9.605362] Memory state around the buggy address:
[ 9.610714] ffff88845dd2ff00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 9.618786] ffff88845dd2ff80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 9.626857] >ffff88845dd30000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 9.634930] ^
[ 9.638534] ffff88845dd30080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 9.646605] ffff88845dd30100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 9.654675] ==================================================================
Link: https://lore.kernel.org/all/20240414114944.1012359-1-qiang4.zhang@linux.intel.com/
Fixes: 40caa127f3c7 ("init: bootconfig: Remove all bootconfig data when the init memory is removed")
Cc: Stable@vger.kernel.org
Signed-off-by: Qiang Zhang <qiang4.zhang@intel.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 5a1ccf0c72cf917ff3ccc131d1bb8d19338ffe52 ]
This patch introduces a new USB quirk,
USB_QUIRK_SHORT_SET_ADDRESS_REQ_TIMEOUT, which modifies the timeout value
for the SET_ADDRESS request. The standard timeout for USB request/command
is 5000 ms, as recommended in the USB 3.2 specification (section 9.2.6.1).
However, certain scenarios, such as connecting devices through an APTIV
hub, can lead to timeout errors when the device enumerates as full speed
initially and later switches to high speed during chirp negotiation.
In such cases, USB analyzer logs reveal that the bus suspends for
5 seconds due to incorrect chirp parsing and resumes only after two
consecutive timeout errors trigger a hub driver reset.
Packet(54) Dir(?) Full Speed J(997.100 us) Idle( 2.850 us)
_______| Time Stamp(28 . 105 910 682)
_______|_____________________________________________________________Ch0
Packet(55) Dir(?) Full Speed J(997.118 us) Idle( 2.850 us)
_______| Time Stamp(28 . 106 910 632)
_______|_____________________________________________________________Ch0
Packet(56) Dir(?) Full Speed J(399.650 us) Idle(222.582 us)
_______| Time Stamp(28 . 107 910 600)
_______|_____________________________________________________________Ch0
Packet(57) Dir Chirp J( 23.955 ms) Idle(115.169 ms)
_______| Time Stamp(28 . 108 532 832)
_______|_____________________________________________________________Ch0
Packet(58) Dir(?) Full Speed J (Suspend)( 5.347 sec) Idle( 5.366 us)
_______| Time Stamp(28 . 247 657 600)
_______|_____________________________________________________________Ch0
This 5-second delay in device enumeration is undesirable, particularly
in automotive applications where quick enumeration is crucial
(ideally within 3 seconds).
The newly introduced quirks provide the flexibility to align with a
3-second time limit, as required in specific contexts like automotive
applications.
By reducing the SET_ADDRESS request timeout to 500 ms, the
system can respond more swiftly to errors, initiate rapid recovery, and
ensure efficient device enumeration. This change is vital for scenarios
where rapid smartphone enumeration and screen projection are essential.
To use the quirk, please write "vendor_id:product_id:p" to
/sys/bus/usb/drivers/hub/module/parameter/quirks
For example,
echo "0x2c48:0x0132:p" > /sys/bus/usb/drivers/hub/module/parameters/quirks"
Signed-off-by: Hardik Gajjar <hgajjar@de.adit-jv.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20231027152029.104363-2-hgajjar@de.adit-jv.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a769154c7cac037914ba375ae88aae55b2c853e0 ]
- The HCD address_device callback now accepts a user-defined timeout value
in milliseconds, providing better control over command execution times.
- The default timeout value for the address_device command has been set
to 5000 ms, aligning with the USB 3.2 specification. However, this
timeout can be adjusted as needed.
- The xhci_setup_device function has been updated to accept the timeout
value, allowing it to specify the maximum wait time for the command
operation to complete.
- The hub driver has also been updated to accommodate the newly added
timeout parameter during the SET_ADDRESS request.
Signed-off-by: Hardik Gajjar <hgajjar@de.adit-jv.com>
Reviewed-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20231027152029.104363-1-hgajjar@de.adit-jv.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 5a1ccf0c72cf ("usb: new quirk to reduce the SET_ADDRESS request timeout")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0fb53e64705ae0fabd9593102e0f0e6812968802 ]
Advertise support of Gen5 devices in the driver's device ID table and
add the same IDs for the switchtec quirks. Also update driver code to
accommodate them.
Link: https://lore.kernel.org/r/20230624000003.2315364-3-kelvin.cao@microchip.com
Signed-off-by: Kelvin Cao <kelvin.cao@microchip.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
