summaryrefslogtreecommitdiff
path: root/include/linux
AgeCommit message (Collapse)AuthorFilesLines
2021-03-17x86/entry: Move nmi entry/exit into common codeThomas Gleixner1-1/+38
commit b6be002bcd1dd1dedb926abf3c90c794eacb77dc upstream. Lockdep state handling on NMI enter and exit is nothing specific to X86. It's not any different on other architectures. Also the extra state type is not necessary, irqentry_state_t can carry the necessary information as well. Move it to common code and extend irqentry_state_t to carry lockdep state. [ Ira: Make exit_rcu and lockdep a union as they are mutually exclusive between the IRQ and NMI exceptions, and add kernel documentation for struct irqentry_state_t ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20201102205320.1458656-7-ira.weiny@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-17linux/compiler-clang.h: define HAVE_BUILTIN_BSWAP*Arnd Bergmann1-0/+6
commit 97e4910232fa1f81e806aa60c25a0450276d99a2 upstream. Separating compiler-clang.h from compiler-gcc.h inadventently dropped the definitions of the three HAVE_BUILTIN_BSWAP macros, which requires falling back to the open-coded version and hoping that the compiler detects it. Since all versions of clang support the __builtin_bswap interfaces, add back the flags and have the headers pick these up automatically. This results in a 4% improvement of compilation speed for arm defconfig. Note: it might also be worth revisiting which architectures set CONFIG_ARCH_USE_BUILTIN_BSWAP for one compiler or the other, today this is set on six architectures (arm32, csky, mips, powerpc, s390, x86), while another ten architectures define custom helpers (alpha, arc, ia64, m68k, mips, nios2, parisc, sh, sparc, xtensa), and the rest (arm64, h8300, hexagon, microblaze, nds32, openrisc, riscv) just get the unoptimized version and rely on the compiler to detect it. A long time ago, the compiler builtins were architecture specific, but nowadays, all compilers that are able to build the kernel have correct implementations of them, though some may not be as optimized as the inline asm versions. The patch that dropped the optimization landed in v4.19, so as discussed it would be fairly safe to backport this revert to stable kernels to the 4.19/5.4/5.10 stable kernels, but there is a remaining risk for regressions, and it has no known side-effects besides compile speed. Link: https://lkml.kernel.org/r/20210226161151.2629097-1-arnd@kernel.org Link: https://lore.kernel.org/lkml/20210225164513.3667778-1-arnd@kernel.org/ Fixes: 815f0ddb346c ("include/linux/compiler*.h: make compiler-*.h mutually exclusive") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Miguel Ojeda <ojeda@kernel.org> Acked-by: Nick Desaulniers <ndesaulniers@google.com> Acked-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Nick Hu <nickhu@andestech.com> Cc: Greentime Hu <green.hu@gmail.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Guo Ren <guoren@kernel.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Sami Tolvanen <samitolvanen@google.com> Cc: Marco Elver <elver@google.com> Cc: Arvind Sankar <nivedita@alum.mit.edu> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-17include/linux/sched/mm.h: use rcu_dereference in in_vfork()Matthew Wilcox (Oracle)1-1/+2
[ Upstream commit 149fc787353f65b7e72e05e7b75d34863266c3e2 ] Fix a sparse warning by using rcu_dereference(). Technically this is a bug and a sufficiently aggressive compiler could reload the `real_parent' pointer outside the protection of the rcu lock (and access freed memory), but I think it's pretty unlikely to happen. Link: https://lkml.kernel.org/r/20210221194207.1351703-1-willy@infradead.org Fixes: b18dc5f291c0 ("mm, oom: skip vforked tasks from being selected") Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Miaohe Lin <linmiaohe@huawei.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-17stop_machine: mark helpers __always_inlineArnd Bergmann1-5/+6
[ Upstream commit cbf78d85079cee662c45749ef4f744d41be85d48 ] With clang-13, some functions only get partially inlined, with a specialized version referring to a global variable. This triggers a harmless build-time check for the intel-rng driver: WARNING: modpost: drivers/char/hw_random/intel-rng.o(.text+0xe): Section mismatch in reference from the function stop_machine() to the function .init.text:intel_rng_hw_init() The function stop_machine() references the function __init intel_rng_hw_init(). This is often because stop_machine lacks a __init annotation or the annotation of intel_rng_hw_init is wrong. In this instance, an easy workaround is to force the stop_machine() function to be inline, along with related interfaces that did not show the same behavior at the moment, but theoretically could. The combination of the two patches listed below triggers the behavior in clang-13, but individually these commits are correct. Link: https://lkml.kernel.org/r/20210225130153.1956990-1-arnd@kernel.org Fixes: fe5595c07400 ("stop_machine: Provide stop_machine_cpuslocked()") Fixes: ee527cd3a20c ("Use stop_machine_run in the Intel RNG driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: "Paul E. McKenney" <paulmck@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Daniel Bristot de Oliveira <bristot@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-17seqlock,lockdep: Fix seqcount_latch_init()Peter Zijlstra1-4/+1
[ Upstream commit 4817a52b306136c8b2b2271d8770401441e4cf79 ] seqcount_init() must be a macro in order to preserve the static variable that is used for the lockdep key. Don't then wrap it in an inline function, which destroys that. Luckily there aren't many users of this function, but fix it before it becomes a problem. Fixes: 80793c3471d9 ("seqlock: Introduce seqcount_latch_t") Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/YEeFEbNUVkZaXDp4@hirez.programming.kicks-ass.net Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-17perf/core: Flush PMU internal buffers for per-CPU eventsKan Liang1-0/+2
[ Upstream commit a5398bffc01fe044848c5024e5e867e407f239b8 ] Sometimes the PMU internal buffers have to be flushed for per-CPU events during a context switch, e.g., large PEBS. Otherwise, the perf tool may report samples in locations that do not belong to the process where the samples are processed in, because PEBS does not tag samples with PID/TID. The current code only flush the buffers for a per-task event. It doesn't check a per-CPU event. Add a new event state flag, PERF_ATTACH_SCHED_CB, to indicate that the PMU internal buffers have to be flushed for this event during a context switch. Add sched_cb_entry and perf_sched_cb_usages back to track the PMU/cpuctx which is required to be flushed. Only need to invoke the sched_task() for per-CPU events in this patch. The per-task events have been handled in perf_event_context_sched_in/out already. Fixes: 9c964efa4330 ("perf/x86/intel: Drain the PEBS buffer during context switches") Reported-by: Gabriel Marin <gmx@google.com> Originally-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/20201130193842.10569-1-kan.liang@linux.intel.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-17arm64: mte: Map hotplugged memory as Normal TaggedCatalin Marinas1-0/+4
commit d15dfd31384ba3cb93150e5f87661a76fa419f74 upstream. In a system supporting MTE, the linear map must allow reading/writing allocation tags by setting the memory type as Normal Tagged. Currently, this is only handled for memory present at boot. Hotplugged memory uses Normal non-Tagged memory. Introduce pgprot_mhp() for hotplugged memory and use it in add_memory_resource(). The arm64 code maps pgprot_mhp() to pgprot_tagged(). Note that ZONE_DEVICE memory should not be mapped as Tagged and therefore setting the memory type in arch_add_memory() is not feasible. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Fixes: 0178dc761368 ("arm64: mte: Use Normal Tagged attributes for the linear map") Reported-by: Patrick Daly <pdaly@codeaurora.org> Tested-by: Patrick Daly <pdaly@codeaurora.org> Link: https://lore.kernel.org/r/1614745263-27827-1-git-send-email-pdaly@codeaurora.org Cc: <stable@vger.kernel.org> # 5.10.x Cc: Will Deacon <will@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: David Hildenbrand <david@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Link: https://lore.kernel.org/r/20210309122601.5543-1-catalin.marinas@arm.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-17drivers/base/memory: don't store phys_device in memory blocksDavid Hildenbrand1-2/+1
[ Upstream commit e9a2e48e8704c9d20a625c6f2357147d03ea7b97 ] No need to store the value for each and every memory block, as we can easily query the value at runtime. Reshuffle the members to optimize the memory layout. Also, let's clarify what the interface once was used for and why it's legacy nowadays. "phys_device" was used on s390x in older versions of lsmem[2]/chmem[3], back when they were still part of s390x-tools. They were later replaced by the variants in linux-utils. For example, RHEL6 and RHEL7 contain lsmem/chmem from s390-utils. RHEL8 switched to versions from util-linux on s390x [4]. "phys_device" was added with sysfs support for memory hotplug in commit 3947be1969a9 ("[PATCH] memory hotplug: sysfs and add/remove functions") in 2005. It always returned 0. s390x started returning something != 0 on some setups (if sclp.rzm is set by HW) in 2010 via commit 57b552ba0b2f ("memory hotplug/s390: set phys_device"). For s390x, it allowed for identifying which memory block devices belong to the same storage increment (RZM). Only if all memory block devices comprising a single storage increment were offline, the memory could actually be removed in the hypervisor. Since commit e5d709bb5fb7 ("s390/memory hotplug: provide memory_block_size_bytes() function") in 2013 a memory block device spans at least one storage increment - which is why the interface isn't really helpful/used anymore (except by old lsmem/chmem tools). There were once RFC patches to make use of "phys_device" in ACPI context; however, the underlying problem could be solved using different interfaces [1]. [1] https://patchwork.kernel.org/patch/2163871/ [2] https://github.com/ibm-s390-tools/s390-tools/blob/v2.1.0/zconf/lsmem [3] https://github.com/ibm-s390-tools/s390-tools/blob/v2.1.0/zconf/chmem [4] https://bugzilla.redhat.com/show_bug.cgi?id=1504134 Link: https://lkml.kernel.org/r/20210201181347.13262-2-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Cc: Ilya Dryomov <idryomov@gmail.com> Cc: Vaibhav Jain <vaibhav@linux.ibm.com> Cc: Tom Rix <trix@redhat.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-17drm: Use USB controller's DMA mask when importing dmabufsThomas Zimmermann1-0/+2
commit 659ab7a49cbebe0deffcbe1f9560e82006b21817 upstream. USB devices cannot perform DMA and hence have no dma_mask set in their device structure. Therefore importing dmabuf into a USB-based driver fails, which breaks joining and mirroring of display in X11. For USB devices, pick the associated USB controller as attachment device. This allows the DRM import helpers to perform the DMA setup. If the DMA controller does not support DMA transfers, we're out of luck and cannot import. Our current USB-based DRM drivers don't use DMA, so the actual DMA device is not important. Tested by joining/mirroring displays of udl and radeon under Gnome/X11. v8: * release dmadev if device initialization fails (Noralf) * fix commit description (Noralf) v7: * fix use-before-init bug in gm12u320 (Dan) v6: * implement workaround in DRM drivers and hold reference to DMA device while USB device is in use * remove dev_is_usb() (Greg) * collapse USB helper into usb_intf_get_dma_device() (Alan) * integrate Daniel's TODO statement (Daniel) * fix typos (Greg) v5: * provide a helper for USB interfaces (Alan) * add FIXME item to documentation and TODO list (Daniel) v4: * implement workaround with USB helper functions (Greg) * use struct usb_device->bus->sysdev as DMA device (Takashi) v3: * drop gem_create_object * use DMA mask of USB controller, if any (Daniel, Christian, Noralf) v2: * move fix to importer side (Christian, Daniel) * update SHMEM and CMA helpers for new PRIME callbacks Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: 6eb0233ec2d0 ("usb: don't inherity DMA properties for USB devices") Tested-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Noralf Trønnes <noralf@tronnes.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: <stable@vger.kernel.org> # v5.10+ Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210303133229.3288-1-tzimmermann@suse.de Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-17gpiolib: acpi: Allow to find GpioInt() resource by name and indexAndy Shevchenko1-2/+8
commit 809390219fb9c2421239afe5c9eb862d73978ba0 upstream. Currently only search by index is supported. However, in some cases we might need to pass the quirks to the acpi_dev_gpio_irq_get(). For this, split out acpi_dev_gpio_irq_get_by() and replace acpi_dev_gpio_irq_get() by calling above with NULL for name parameter. Fixes: ba8c90c61847 ("gpio: pca953x: Override IRQ for one of the expanders on Galileo Gen 2") Depends-on: 0ea683931adb ("gpio: dwapb: Convert driver to using the GPIO-lib-based IRQ-chip") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-17gpiolib: acpi: Add ACPI_GPIO_QUIRK_ABSOLUTE_NUMBER quirkAndy Shevchenko1-0/+2
commit 62d5247d239d4b48762192a251c647d7c997616a upstream. On some systems the ACPI tables has wrong pin number and instead of having a relative one it provides an absolute one in the global GPIO number space. Add ACPI_GPIO_QUIRK_ABSOLUTE_NUMBER quirk to cope with such cases. Fixes: ba8c90c61847 ("gpio: pca953x: Override IRQ for one of the expanders on Galileo Gen 2") Depends-on: 0ea683931adb ("gpio: dwapb: Convert driver to using the GPIO-lib-based IRQ-chip") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-17can: skb: can_skb_set_owner(): fix ref counting if socket was closed before ↵Oleksij Rempel1-2/+6
setting skb ownership commit e940e0895a82c6fbaa259f2615eb52b57ee91a7e upstream. There are two ref count variables controlling the free()ing of a socket: - struct sock::sk_refcnt - which is changed by sock_hold()/sock_put() - struct sock::sk_wmem_alloc - which accounts the memory allocated by the skbs in the send path. In case there are still TX skbs on the fly and the socket() is closed, the struct sock::sk_refcnt reaches 0. In the TX-path the CAN stack clones an "echo" skb, calls sock_hold() on the original socket and references it. This produces the following back trace: | WARNING: CPU: 0 PID: 280 at lib/refcount.c:25 refcount_warn_saturate+0x114/0x134 | refcount_t: addition on 0; use-after-free. | Modules linked in: coda_vpu(E) v4l2_jpeg(E) videobuf2_vmalloc(E) imx_vdoa(E) | CPU: 0 PID: 280 Comm: test_can.sh Tainted: G E 5.11.0-04577-gf8ff6603c617 #203 | Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) | Backtrace: | [<80bafea4>] (dump_backtrace) from [<80bb0280>] (show_stack+0x20/0x24) r7:00000000 r6:600f0113 r5:00000000 r4:81441220 | [<80bb0260>] (show_stack) from [<80bb593c>] (dump_stack+0xa0/0xc8) | [<80bb589c>] (dump_stack) from [<8012b268>] (__warn+0xd4/0x114) r9:00000019 r8:80f4a8c2 r7:83e4150c r6:00000000 r5:00000009 r4:80528f90 | [<8012b194>] (__warn) from [<80bb09c4>] (warn_slowpath_fmt+0x88/0xc8) r9:83f26400 r8:80f4a8d1 r7:00000009 r6:80528f90 r5:00000019 r4:80f4a8c2 | [<80bb0940>] (warn_slowpath_fmt) from [<80528f90>] (refcount_warn_saturate+0x114/0x134) r8:00000000 r7:00000000 r6:82b44000 r5:834e5600 r4:83f4d540 | [<80528e7c>] (refcount_warn_saturate) from [<8079a4c8>] (__refcount_add.constprop.0+0x4c/0x50) | [<8079a47c>] (__refcount_add.constprop.0) from [<8079a57c>] (can_put_echo_skb+0xb0/0x13c) | [<8079a4cc>] (can_put_echo_skb) from [<8079ba98>] (flexcan_start_xmit+0x1c4/0x230) r9:00000010 r8:83f48610 r7:0fdc0000 r6:0c080000 r5:82b44000 r4:834e5600 | [<8079b8d4>] (flexcan_start_xmit) from [<80969078>] (netdev_start_xmit+0x44/0x70) r9:814c0ba0 r8:80c8790c r7:00000000 r6:834e5600 r5:82b44000 r4:82ab1f00 | [<80969034>] (netdev_start_xmit) from [<809725a4>] (dev_hard_start_xmit+0x19c/0x318) r9:814c0ba0 r8:00000000 r7:82ab1f00 r6:82b44000 r5:00000000 r4:834e5600 | [<80972408>] (dev_hard_start_xmit) from [<809c6584>] (sch_direct_xmit+0xcc/0x264) r10:834e5600 r9:00000000 r8:00000000 r7:82b44000 r6:82ab1f00 r5:834e5600 r4:83f27400 | [<809c64b8>] (sch_direct_xmit) from [<809c6c0c>] (__qdisc_run+0x4f0/0x534) To fix this problem, only set skb ownership to sockets which have still a ref count > 0. Fixes: 0ae89beb283a ("can: add destructor for self generated skbs") Cc: Oliver Hartkopp <socketcan@hartkopp.net> Cc: Andre Naujoks <nautsch2@gmail.com> Link: https://lore.kernel.org/r/20210226092456.27126-1-o.rempel@pengutronix.de Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-17net: check if protocol extracted by virtio_net_hdr_set_proto is correctBalazs Nemeth1-1/+6
commit 924a9bc362a5223cd448ca08c3dde21235adc310 upstream. For gso packets, virtio_net_hdr_set_proto sets the protocol (if it isn't set) based on the type in the virtio net hdr, but the skb could contain anything since it could come from packet_snd through a raw socket. If there is a mismatch between what virtio_net_hdr_set_proto sets and the actual protocol, then the skb could be handled incorrectly later on. An example where this poses an issue is with the subsequent call to skb_flow_dissect_flow_keys_basic which relies on skb->protocol being set correctly. A specially crafted packet could fool skb_flow_dissect_flow_keys_basic preventing EINVAL to be returned. Avoid blindly trusting the information provided by the virtio net header by checking that the protocol in the packet actually matches the protocol set by virtio_net_hdr_set_proto. Note that since the protocol is only checked if skb->dev implements header_ops->parse_protocol, packets from devices without the implementation are not checked at this stage. Fixes: 9274124f023b ("net: stricter validation of untrusted gso packets") Signed-off-by: Balazs Nemeth <bnemeth@redhat.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-11misc: eeprom_93xx46: Add quirk to support Microchip 93LC46B eepromAswath Govindraju1-0/+2
[ Upstream commit f6f1f8e6e3eea25f539105d48166e91f0ab46dd1 ] A dummy zero bit is sent preceding the data during a read transfer by the Microchip 93LC46B eeprom (section 2.7 of[1]). This results in right shift of data during a read. In order to ignore this bit a quirk can be added to send an extra zero bit after the read address. Add a quirk to ignore the zero bit sent before data by adding a zero bit after the read address. [1] - https://www.mouser.com/datasheet/2/268/20001749K-277859.pdf Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Link: https://lore.kernel.org/r/20210105105817.17644-3-a-govindraju@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-11bus: ti-sysc: Implement GPMC debug quirk to drop platform dataTony Lindgren1-0/+1
[ Upstream commit cfeeea60af2f01c13b94d57a9bb1291e7bc181da ] We need to enable no-reset-on-init quirk for GPMC if the config option for CONFIG_OMAP_GPMC_DEBUG is set. Otherwise the GPMC driver code is unable to show the bootloader configured timings. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-09mm: Remove examples from enum zone_type commentNicolas Saenz Julienne1-20/+0
commit 04435217f96869ac3a8f055ff68c5237a60bcd7e upstream We can't really list every setup in common code. On top of that they are unlikely to stay true for long as things change in the arch trees independently of this comment. Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20201119175400.9995-8-nsaenzjulienne@suse.de Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-09arm64: mm: Set ZONE_DMA size based on early IORT scanArd Biesheuvel1-0/+4
commit 2b8652936f0ca9ca2e6c984ae76c7bfcda1b3f22 upstream We recently introduced a 1 GB sized ZONE_DMA to cater for platforms incorporating masters that can address less than 32 bits of DMA, in particular the Raspberry Pi 4, which has 4 or 8 GB of DRAM, but has peripherals that can only address up to 1 GB (and its PCIe host bridge can only access the bottom 3 GB) Instructing the DMA layer about these limitations is straight-forward, even though we had to fix some issues regarding memory limits set in the IORT for named components, and regarding the handling of ACPI _DMA methods. However, the DMA layer also needs to be able to allocate memory that is guaranteed to meet those DMA constraints, for bounce buffering as well as allocating the backing for consistent mappings. This is why the 1 GB ZONE_DMA was introduced recently. Unfortunately, it turns out the having a 1 GB ZONE_DMA as well as a ZONE_DMA32 causes problems with kdump, and potentially in other places where allocations cannot cross zone boundaries. Therefore, we should avoid having two separate DMA zones when possible. So let's do an early scan of the IORT, and only create the ZONE_DMA if we encounter any devices that need it. This puts the burden on the firmware to describe such limitations in the IORT, which may be redundant (and less precise) if _DMA methods are also being provided. However, it should be noted that this situation is highly unusual for arm64 ACPI machines. Also, the DMA subsystem still gives precedence to the _DMA method if implemented, and so we will not lose the ability to perform streaming DMA outside the ZONE_DMA if the _DMA method permits it. [nsaenz: unified implementation with DT's counterpart] Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Tested-by: Jeremy Linton <jeremy.linton@arm.com> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Hanjun Guo <guohanjun@huawei.com> Cc: Jeremy Linton <jeremy.linton@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Cc: Rob Herring <robh+dt@kernel.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Link: https://lore.kernel.org/r/20201119175400.9995-7-nsaenzjulienne@suse.de Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-09of/address: Introduce of_dma_get_max_cpu_address()Nicolas Saenz Julienne1-0/+7
commit 964db79d6c186cc2ecc6ae46f98eed7e0ea8cf71 upstream Introduce of_dma_get_max_cpu_address(), which provides the highest CPU physical address addressable by all DMA masters in the system. It's specially useful for setting memory zones sizes at early boot time. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20201119175400.9995-4-nsaenzjulienne@suse.de Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-09crypto - shash: reduce minimum alignment of shash_desc structureArd Biesheuvel1-3/+6
commit 660d2062190db131d2feaf19914e90f868fe285c upstream. Unlike many other structure types defined in the crypto API, the 'shash_desc' structure is permitted to live on the stack, which implies its contents may not be accessed by DMA masters. (This is due to the fact that the stack may be located in the vmalloc area, which requires a different virtual-to-physical translation than the one implemented by the DMA subsystem) Our definition of CRYPTO_MINALIGN_ATTR is based on ARCH_KMALLOC_MINALIGN, which may take DMA constraints into account on architectures that support non-cache coherent DMA such as ARM and arm64. In this case, the value is chosen to reflect the largest cacheline size in the system, in order to ensure that explicit cache maintenance as required by non-coherent DMA masters does not affect adjacent, unrelated slab allocations. On arm64, this value is currently set at 128 bytes. This means that applying CRYPTO_MINALIGN_ATTR to struct shash_desc is both unnecessary (as it is never used for DMA), and undesirable, given that it wastes stack space (on arm64, performing the alignment costs 112 bytes in the worst case, and the hole between the 'tfm' and '__ctx' members takes up another 120 bytes, resulting in an increased stack footprint of up to 232 bytes.) So instead, let's switch to the minimum SLAB alignment, which does not take DMA constraints into account. Note that this is a no-op for x86. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-07swap: fix swapfile read/write offsetJens Axboe1-0/+1
commit caf6912f3f4af7232340d500a4a2008f81b93f14 upstream. We're not factoring in the start of the file for where to write and read the swapfile, which leads to very unfortunate side effects of writing where we should not be... Fixes: dd6bd0d9c7db ("swap: use bdev_read_page() / bdev_write_page()") Signed-off-by: Jens Axboe <axboe@kernel.dk> Cc: Anthony Iliopoulos <ailiop@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-07zsmalloc: account the number of compacted pages correctlyRokudo Yan1-1/+1
commit 2395928158059b8f9858365fce7713ce7fef62e4 upstream. There exists multiple path may do zram compaction concurrently. 1. auto-compaction triggered during memory reclaim 2. userspace utils write zram<id>/compaction node So, multiple threads may call zs_shrinker_scan/zs_compact concurrently. But pages_compacted is a per zsmalloc pool variable and modification of the variable is not serialized(through under class->lock). There are two issues here: 1. the pages_compacted may not equal to total number of pages freed(due to concurrently add). 2. zs_shrinker_scan may not return the correct number of pages freed(issued by current shrinker). The fix is simple: 1. account the number of pages freed in zs_compact locally. 2. use actomic variable pages_compacted to accumulate total number. Link: https://lkml.kernel.org/r/20210202122235.26885-1-wu-yan@tcl.com Fixes: 860c707dca155a56 ("zsmalloc: account the number of compacted pages") Signed-off-by: Rokudo Yan <wu-yan@tcl.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-07net: fix dev_ifsioc_locked() race conditionCong Wang1-0/+3
commit 3b23a32a63219f51a5298bc55a65ecee866e79d0 upstream. dev_ifsioc_locked() is called with only RCU read lock, so when there is a parallel writer changing the mac address, it could get a partially updated mac address, as shown below: Thread 1 Thread 2 // eth_commit_mac_addr_change() memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN); // dev_ifsioc_locked() memcpy(ifr->ifr_hwaddr.sa_data, dev->dev_addr,...); Close this race condition by guarding them with a RW semaphore, like netdev_get_name(). We can not use seqlock here as it does not allow blocking. The writers already take RTNL anyway, so this does not affect the slow path. To avoid bothering existing dev_set_mac_address() callers in drivers, introduce a new wrapper just for user-facing callers on ioctl and rtnetlink paths. Note, bonding also changes slave mac addresses but that requires a separate patch due to the complexity of bonding code. Fixes: 3710becf8a58 ("net: RCU locking for simple ioctl()") Reported-by: "Gong, Sishuai" <sishuai@purdue.edu> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Cong Wang <cong.wang@bytedance.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-04net: icmp: pass zeroed opts from icmp{,v6}_ndo_send before sendingJason A. Donenfeld2-7/+20
commit ee576c47db60432c37e54b1e2b43a8ca6d3a8dca upstream. The icmp{,v6}_send functions make all sorts of use of skb->cb, casting it with IPCB or IP6CB, assuming the skb to have come directly from the inet layer. But when the packet comes from the ndo layer, especially when forwarded, there's no telling what might be in skb->cb at that point. As a result, the icmp sending code risks reading bogus memory contents, which can result in nasty stack overflows such as this one reported by a user: panic+0x108/0x2ea __stack_chk_fail+0x14/0x20 __icmp_send+0x5bd/0x5c0 icmp_ndo_send+0x148/0x160 In icmp_send, skb->cb is cast with IPCB and an ip_options struct is read from it. The optlen parameter there is of particular note, as it can induce writes beyond bounds. There are quite a few ways that can happen in __ip_options_echo. For example: // sptr/skb are attacker-controlled skb bytes sptr = skb_network_header(skb); // dptr/dopt points to stack memory allocated by __icmp_send dptr = dopt->__data; // sopt is the corrupt skb->cb in question if (sopt->rr) { optlen = sptr[sopt->rr+1]; // corrupt skb->cb + skb->data soffset = sptr[sopt->rr+2]; // corrupt skb->cb + skb->data // this now writes potentially attacker-controlled data, over // flowing the stack: memcpy(dptr, sptr+sopt->rr, optlen); } In the icmpv6_send case, the story is similar, but not as dire, as only IP6CB(skb)->iif and IP6CB(skb)->dsthao are used. The dsthao case is worse than the iif case, but it is passed to ipv6_find_tlv, which does a bit of bounds checking on the value. This is easy to simulate by doing a `memset(skb->cb, 0x41, sizeof(skb->cb));` before calling icmp{,v6}_ndo_send, and it's only by good fortune and the rarity of icmp sending from that context that we've avoided reports like this until now. For example, in KASAN: BUG: KASAN: stack-out-of-bounds in __ip_options_echo+0xa0e/0x12b0 Write of size 38 at addr ffff888006f1f80e by task ping/89 CPU: 2 PID: 89 Comm: ping Not tainted 5.10.0-rc7-debug+ #5 Call Trace: dump_stack+0x9a/0xcc print_address_description.constprop.0+0x1a/0x160 __kasan_report.cold+0x20/0x38 kasan_report+0x32/0x40 check_memory_region+0x145/0x1a0 memcpy+0x39/0x60 __ip_options_echo+0xa0e/0x12b0 __icmp_send+0x744/0x1700 Actually, out of the 4 drivers that do this, only gtp zeroed the cb for the v4 case, while the rest did not. So this commit actually removes the gtp-specific zeroing, while putting the code where it belongs in the shared infrastructure of icmp{,v6}_ndo_send. This commit fixes the issue by passing an empty IPCB or IP6CB along to the functions that actually do the work. For the icmp_send, this was already trivial, thanks to __icmp_send providing the plumbing function. For icmpv6_send, this required a tiny bit of refactoring to make it behave like the v4 case, after which it was straight forward. Fixes: a2b78e9b2cac ("sunvnet: generate ICMP PTMUD messages for smaller port MTUs") Reported-by: SinYu <liuxyon@gmail.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/netdev/CAF=yD-LOF116aHub6RMe8vB8ZpnrrnoTdqhobEx+bvoA8AsP0w@mail.gmail.com/T/ Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Link: https://lore.kernel.org/r/20210223131858.72082-1-Jason@zx2c4.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-04ipv6: silence compilation warning for non-IPV6 buildsLeon Romanovsky1-1/+1
commit 1faba27f11c8da244e793546a1b35a9b1da8208e upstream. The W=1 compilation of allmodconfig generates the following warning: net/ipv6/icmp.c:448:6: warning: no previous prototype for 'icmp6_send' [-Wmissing-prototypes] 448 | void icmp6_send(struct sk_buff *skb, u8 type, u8 code, __u32 info, | ^~~~~~~~~~ Fix it by providing function declaration for builds with ipv6 as a module. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-04kgdb: fix to kill breakpoints on initmem after bootSumit Garg1-0/+2
commit d54ce6158e354f5358a547b96299ecd7f3725393 upstream. Currently breakpoints in kernel .init.text section are not handled correctly while allowing to remove them even after corresponding pages have been freed. Fix it via killing .init.text section breakpoints just prior to initmem pages being freed. Doug: "HW breakpoints aren't handled by this patch but it's probably not such a big deal". Link: https://lkml.kernel.org/r/20210224081652.587785-1-sumit.garg@linaro.org Signed-off-by: Sumit Garg <sumit.garg@linaro.org> Suggested-by: Doug Anderson <dianders@chromium.org> Acked-by: Doug Anderson <dianders@chromium.org> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Tested-by: Daniel Thompson <daniel.thompson@linaro.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-04dm: fix deadlock when swapping to encrypted deviceMikulas Patocka1-0/+5
commit a666e5c05e7c4aaabb2c5d58117b0946803d03d2 upstream. The system would deadlock when swapping to a dm-crypt device. The reason is that for each incoming write bio, dm-crypt allocates memory that holds encrypted data. These excessive allocations exhaust all the memory and the result is either deadlock or OOM trigger. This patch limits the number of in-flight swap bios, so that the memory consumed by dm-crypt is limited. The limit is enforced if the target set the "limit_swap_bios" variable and if the bio has REQ_SWAP set. Non-swap bios are not affected becuase taking the semaphore would cause performance degradation. This is similar to request-based drivers - they will also block when the number of requests is over the limit. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-04kcmp: Support selection of SYS_kcmp without CHECKPOINT_RESTOREChris Wilson1-1/+1
commit bfe3911a91047557eb0e620f95a370aee6a248c7 upstream. Userspace has discovered the functionality offered by SYS_kcmp and has started to depend upon it. In particular, Mesa uses SYS_kcmp for os_same_file_description() in order to identify when two fd (e.g. device or dmabuf) point to the same struct file. Since they depend on it for core functionality, lift SYS_kcmp out of the non-default CONFIG_CHECKPOINT_RESTORE into the selectable syscall category. Rasmus Villemoes also pointed out that systemd uses SYS_kcmp to deduplicate the per-service file descriptor store. Note that some distributions such as Ubuntu are already enabling CHECKPOINT_RESTORE in their configs and so, by extension, SYS_kcmp. References: https://gitlab.freedesktop.org/drm/intel/-/issues/3046 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Kees Cook <keescook@chromium.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Will Drewry <wad@chromium.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Dave Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: stable@vger.kernel.org Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> # DRM depends on kcmp Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> # systemd uses kcmp Reviewed-by: Cyrill Gorcunov <gorcunov@gmail.com> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210205220012.1983-1-chris@chris-wilson.co.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-04rcu/nocb: Perform deferred wake up before last idle's need_resched() checkFrederic Weisbecker1-0/+2
commit 43789ef3f7d61aa7bed0cb2764e588fc990c30ef upstream. Entering RCU idle mode may cause a deferred wake up of an RCU NOCB_GP kthread (rcuog) to be serviced. Usually a local wake up happening while running the idle task is handled in one of the need_resched() checks carefully placed within the idle loop that can break to the scheduler. Unfortunately the call to rcu_idle_enter() is already beyond the last generic need_resched() check and we may halt the CPU with a resched request unhandled, leaving the task hanging. Fix this with splitting the rcuog wakeup handling from rcu_idle_enter() and place it before the last generic need_resched() check in the idle loop. It is then assumed that no call to call_rcu() will be performed after that in the idle loop until the CPU is put in low power mode. Fixes: 96d3fd0d315a (rcu: Break call_rcu() deadlock involving scheduler and perf) Reported-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20210131230548.32970-3-frederic@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-04KEYS: trusted: Reserve TPM for seal and unseal operationsJarkko Sakkinen1-1/+4
commit 8c657a0590de585b1115847c17b34a58025f2f4b upstream. When TPM 2.0 trusted keys code was moved to the trusted keys subsystem, the operations were unwrapped from tpm_try_get_ops() and tpm_put_ops(), which are used to take temporarily the ownership of the TPM chip. The ownership is only taken inside tpm_send(), but this is not sufficient, as in the key load TPM2_CC_LOAD, TPM2_CC_UNSEAL and TPM2_FLUSH_CONTEXT need to be done as a one single atom. Take the TPM chip ownership before sending anything with tpm_try_get_ops() and tpm_put_ops(), and use tpm_transmit_cmd() to send TPM commands instead of tpm_send(), reverting back to the old behaviour. Fixes: 2e19e10131a0 ("KEYS: trusted: Move TPM2 trusted keys code") Reported-by: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: stable@vger.kernel.org Cc: David Howells <dhowells@redhat.com> Cc: Mimi Zohar <zohar@linux.ibm.com> Cc: Sumit Garg <sumit.garg@linaro.org> Acked-by Sumit Garg <sumit.garg@linaro.org> Tested-by: Mimi Zohar <zohar@linux.ibm.com> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-04mm/rmap: fix potential pte_unmap on an not mapped pteMiaohe Lin1-1/+2
[ Upstream commit 5d5d19eda6b0ee790af89c45e3f678345be6f50f ] For PMD-mapped page (usually THP), pvmw->pte is NULL. For PTE-mapped THP, pvmw->pte is mapped. But for HugeTLB pages, pvmw->pte is not mapped and set to the relevant page table entry. So in page_vma_mapped_walk_done(), we may do pte_unmap() for HugeTLB pte which is not mapped. Fix this by checking pvmw->page against PageHuge before trying to do pte_unmap(). Link: https://lkml.kernel.org/r/20210127093349.39081-1-linmiaohe@huawei.com Fixes: ace71a19cec5 ("mm: introduce page_vma_mapped_walk()") Signed-off-by: Hongxiang Lou <louhongxiang@huawei.com> Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Cc: Kees Cook <keescook@chromium.org> Cc: Nathan Chancellor <natechancellor@gmail.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Michel Lespinasse <walken@google.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Wei Yang <richard.weiyang@linux.alibaba.com> Cc: Dmitry Safonov <0x7f454c46@gmail.com> Cc: Brian Geffon <bgeffon@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04mm: fix memory_failure() handling of dax-namespace metadataDan Williams1-0/+6
[ Upstream commit 34dc45be4563f344d59ba0428416d0d265aa4f4d ] Given 'struct dev_pagemap' spans both data pages and metadata pages be careful to consult the altmap if present to delineate metadata. In fact the pfn_first() helper already identifies the first valid data pfn, so export that helper for other code paths via pgmap_pfn_valid(). Other usage of get_dev_pagemap() are not a concern because those are operating on known data pfns having been looked up by get_user_pages(). I.e. metadata pfns are never user mapped. Link: https://lkml.kernel.org/r/161058501758.1840162.4239831989762604527.stgit@dwillia2-desk3.amr.corp.intel.com Fixes: 6100e34b2526 ("mm, memory_failure: Teach memory_failure() about dev_pagemap pages") Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reported-by: David Hildenbrand <david@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Qian Cai <cai@lca.pw> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04mm,thp,shmem: make khugepaged obey tmpfs mount flagsRik van Riel1-0/+2
[ Upstream commit cd89fb06509903f942a0ffe97ffa63034671ed0c ] Currently if thp enabled=[madvise], mounting a tmpfs filesystem with huge=always and mmapping files from that tmpfs does not result in khugepaged collapsing those mappings, despite the mount flag indicating that it should. Fix that by breaking up the blocks of tests in hugepage_vma_check a little bit, and testing things in the correct order. Link: https://lkml.kernel.org/r/20201124194925.623931-4-riel@surriel.com Fixes: c2231020ea7b ("mm: thp: register mm for khugepaged when merging vma for shmem") Signed-off-by: Rik van Riel <riel@surriel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Hocko <mhocko@suse.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Xu Yu <xuyu@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04soundwire: export sdw_write/read_no_pm functionsBard Liao1-0/+2
[ Upstream commit 167790abb90fa073d8341ee0e408ccad3d2109cd ] sdw_write_no_pm and sdw_read_no_pm are useful when we want to do IO without touching PM. Fixes: 0231453bc08f ('soundwire: bus: add clock stop helpers') Fixes: 60ee9be25571 ('soundwire: bus: add PM/no-PM versions of read/write functions') Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20210122070634.12825-5-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04regulator: bd718x7, bd71828, Fix dvs voltage levelsMatti Vaittinen1-8/+6
[ Upstream commit c294554111a835598b557db789d9ad2379b512a2 ] The ROHM BD718x7 and BD71828 drivers support setting HW state specific voltages from device-tree. This is used also by various in-tree DTS files. These drivers do incorrectly try to compose bit-map using enum values. By a chance this works for first two valid levels having values 1 and 2 - but setting values for the rest of the levels do indicate capability of setting values for first levels as well. Luckily the regulators which support setting values for SUSPEND/LPSR do usually also support setting values for RUN and IDLE too - thus this has not been such a fatal issue. Fix this by defining the old enum values as bits and fixing the parsing code. This allows keeping existing IC specific drivers intact and only slightly changing the rohm-regulator.c Fixes: 21b72156ede8b ("regulator: bd718x7: Split driver to common and bd718x7 specific parts") Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Acked-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210212080023.GA880728@localhost.localdomain Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04iommu: Switch gather->end to the inclusive endYong Wu1-2/+2
[ Upstream commit 862c3715de8f3e5350489240c951d697f04bd8c9 ] Currently gather->end is "unsigned long" which may be overflow in arch32 in the corner case: 0xfff00000 + 0x100000(iova + size). Although it doesn't affect the size(end - start), it affects the checking "gather->end < end" This patch changes this "end" to the real end address (end = start + size - 1). Correspondingly, update the length to "end - start + 1". Fixes: a7d20dc19d9e ("iommu: Introduce struct iommu_iotlb_gather for batching TLB flushes") Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20210107122909.16317-5-yong.wu@mediatek.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04certs: Fix blacklist flag type confusionDavid Howells1-0/+1
[ Upstream commit 4993e1f9479a4161fd7d93e2b8b30b438f00cb0f ] KEY_FLAG_KEEP is not meant to be passed to keyring_alloc() or key_alloc(), as these only take KEY_ALLOC_* flags. KEY_FLAG_KEEP has the same value as KEY_ALLOC_BYPASS_RESTRICTION, but fortunately only key_create_or_update() uses it. LSMs using the key_alloc hook don't check that flag. KEY_FLAG_KEEP is then ignored but fortunately (again) the root user cannot write to the blacklist keyring, so it is not possible to remove a key/hash from it. Fix this by adding a KEY_ALLOC_SET_KEEP flag that tells key_alloc() to set KEY_FLAG_KEEP on the new key. blacklist_init() can then, correctly, pass this to keyring_alloc(). We can also use this in ima_mok_init() rather than setting the flag manually. Note that this doesn't fix an observable bug with the current implementation but it is required to allow addition of new hashes to the blacklist in the future without making it possible for them to be removed. Fixes: 734114f8782f ("KEYS: Add a system blacklist keyring") Reported-by: Mickaël Salaün <mic@linux.microsoft.com> Signed-off-by: David Howells <dhowells@redhat.com> cc: Mickaël Salaün <mic@linux.microsoft.com> cc: Mimi Zohar <zohar@linux.vnet.ibm.com> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04ima: Free IMA measurement buffer after kexec syscallLakshmi Ramasubramanian1-0/+5
[ Upstream commit f31e3386a4e92ba6eda7328cb508462956c94c64 ] IMA allocates kernel virtual memory to carry forward the measurement list, from the current kernel to the next kernel on kexec system call, in ima_add_kexec_buffer() function. This buffer is not freed before completing the kexec system call resulting in memory leak. Add ima_buffer field in "struct kimage" to store the virtual address of the buffer allocated for the IMA measurement list. Free the memory allocated for the IMA measurement list in kimage_file_post_load_cleanup() function. Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> Suggested-by: Tyler Hicks <tyhicks@linux.microsoft.com> Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com> Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com> Fixes: 7b8589cc29e7 ("ima: on soft reboot, save the measurement list") Signed-off-by: Mimi Zohar <zohar@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04tty: convert tty_ldisc_ops 'read()' function to take a kernel pointerLinus Torvalds1-1/+2
[ Upstream commit 3b830a9c34d5897be07176ce4e6f2d75e2c8cfd7 ] The tty line discipline .read() function was passed the final user pointer destination as an argument, which doesn't match the 'write()' function, and makes it very inconvenient to do a splice method for ttys. This is a conversion to use a kernel buffer instead. NOTE! It does this by passing the tty line discipline ->read() function an additional "cookie" to fill in, and an offset into the cookie data. The line discipline can fill in the cookie data with its own private information, and then the reader will repeat the read until either the cookie is cleared or it runs out of data. The only real user of this is N_HDLC, which can use this to handle big packets, even if the kernel buffer is smaller than the whole packet. Cc: Christoph Hellwig <hch@lst.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04bpf: Avoid warning when re-casting __bpf_call_base into __bpf_call_base_argsAndrii Nakryiko1-1/+1
[ Upstream commit 6943c2b05bf09fd5c5729f7d7d803bf3f126cb9a ] BPF interpreter uses extra input argument, so re-casts __bpf_call_base into __bpf_call_base_args. Avoid compiler warning about incompatible function prototypes by casting to void * first. Fixes: 1ea47e01ad6e ("bpf: add support for bpf_call to interpreter") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20210112075520.4103414-3-andrii@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04bpf: Add bpf_patch_call_args prototype to include/linux/bpf.hAndrii Nakryiko1-0/+3
[ Upstream commit a643bff752dcf72a07e1b2ab2f8587e4f51118be ] Add bpf_patch_call_args() prototype. This function is called from BPF verifier and only if CONFIG_BPF_JIT_ALWAYS_ON is not defined. This fixes compiler warning about missing prototype in some kernel configurations. Fixes: 1ea47e01ad6e ("bpf: add support for bpf_call to interpreter") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20210112075520.4103414-2-andrii@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-02-26mm: provide a saner PTE walking API for modulesPaolo Bonzini1-2/+4
commit 9fd6dad1261a541b3f5fa7dc5b152222306e6702 upstream. Currently, the follow_pfn function is exported for modules but follow_pte is not. However, follow_pfn is very easy to misuse, because it does not provide protections (so most of its callers assume the page is writable!) and because it returns after having already unlocked the page table lock. Provide instead a simplified version of follow_pte that does not have the pmdpp and range arguments. The older version survives as follow_invalidate_pte() for use by fs/dax.c. Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-26mm: simplify follow_pte{,pmd}Christoph Hellwig1-3/+3
commit ff5c19ed4b087073cea38ff0edc80c23d7256943 upstream. Merge __follow_pte_pmd, follow_pte_pmd and follow_pte into a single follow_pte function and just pass two additional NULL arguments for the two previous follow_pte callers. [sfr@canb.auug.org.au: merge fix for "s390/pci: remove races against pte updates"] Link: https://lkml.kernel.org/r/20201111221254.7f6a3658@canb.auug.org.au Link: https://lkml.kernel.org/r/20201029101432.47011-3-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-17net: watchdog: hold device global xmit lock during tx disableEdwin Peer1-0/+2
commit 3aa6bce9af0e25b735c9c1263739a5639a336ae8 upstream. Prevent netif_tx_disable() running concurrently with dev_watchdog() by taking the device global xmit lock. Otherwise, the recommended: netif_carrier_off(dev); netif_tx_disable(dev); driver shutdown sequence can happen after the watchdog has already checked carrier, resulting in possible false alarms. This is because netif_tx_lock() only sets the frozen bit without maintaining the locks on the individual queues. Fixes: c3f26a269c24 ("netdev: Fix lockdep warnings in multiqueue configurations.") Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-17udp: fix skb_copy_and_csum_datagram with odd segment sizesWillem de Bruijn1-1/+7
commit 52cbd23a119c6ebf40a527e53f3402d2ea38eccb upstream. When iteratively computing a checksum with csum_block_add, track the offset "pos" to correctly rotate in csum_block_add when offset is odd. The open coded implementation of skb_copy_and_csum_datagram did this. With the switch to __skb_datagram_iter calling csum_and_copy_to_iter, pos was reinitialized to 0 on each call. Bring back the pos by passing it along with the csum to the callback. Changes v1->v2 - pass csum value, instead of csump pointer (Alexander Duyck) Link: https://lore.kernel.org/netdev/20210128152353.GB27281@optiplex/ Fixes: 950fcaecd5cc ("datagram: consolidate datagram copy to iter helpers") Reported-by: Oliver Graute <oliver.graute@gmail.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20210203192952.1849843-1-willemdebruijn.kernel@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-13SUNRPC: Move simple_get_bytes and simple_get_netobj into private headerDave Wysochanski1-2/+1
[ Upstream commit ba6dfce47c4d002d96cd02a304132fca76981172 ] Remove duplicated helper functions to parse opaque XDR objects and place inside new file net/sunrpc/auth_gss/auth_gss_internal.h. In the new file carry the license and copyright from the source file net/sunrpc/auth_gss/auth_gss.c. Finally, update the comment inside include/linux/sunrpc/xdr.h since lockd is not the only user of struct xdr_netobj. Signed-off-by: Dave Wysochanski <dwysocha@redhat.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-02-10mm/vmalloc: separate put pages and flush VM flagsRick Edgecombe1-7/+2
commit 4f6ec8602341e97b364e4e0d41a1ed08148f5e98 upstream. When VM_MAP_PUT_PAGES was added, it was defined with the same value as VM_FLUSH_RESET_PERMS. This doesn't seem like it will cause any big functional problems other than some excess flushing for VM_MAP_PUT_PAGES allocations. Redefine VM_MAP_PUT_PAGES to have its own value. Also, rearrange things so flags are less likely to be missed in the future. Link: https://lkml.kernel.org/r/20210122233706.9304-1-rick.p.edgecombe@intel.com Fixes: b944afc9d64d ("mm: add a VM_MAP_PUT_PAGES flag for vmap") Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Suggested-by: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Daniel Axtens <dja@axtens.net> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-10mm: hugetlbfs: fix cannot migrate the fallocated HugeTLB pageMuchun Song1-0/+2
commit 585fc0d2871c9318c949fbf45b1f081edd489e96 upstream. If a new hugetlb page is allocated during fallocate it will not be marked as active (set_page_huge_active) which will result in a later isolate_huge_page failure when the page migration code would like to move that page. Such a failure would be unexpected and wrong. Only export set_page_huge_active, just leave clear_page_huge_active as static. Because there are no external users. Link: https://lkml.kernel.org/r/20210115124942.46403-3-songmuchun@bytedance.com Fixes: 70c3547e36f5 (hugetlbfs: add hugetlbfs_fallocate()) Signed-off-by: Muchun Song <songmuchun@bytedance.com> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: David Hildenbrand <david@redhat.com> Cc: Yang Shi <shy828301@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-10iommu: Check dev->iommu in dev_iommu_priv_get() before dereferencing itJoerg Roedel1-1/+4
commit 4c9fb5d9140802db4db9f66c23887f43174e113c upstream. The dev_iommu_priv_get() needs a similar check to dev_iommu_fwspec_get() to make sure no NULL-ptr is dereferenced. Fixes: 05a0542b456e1 ("iommu/amd: Store dev_data as device iommu private data") Cc: stable@vger.kernel.org # v5.8+ Link: https://lore.kernel.org/r/20210202145419.29143-1-joro@8bytes.org Reference: https://bugzilla.kernel.org/show_bug.cgi?id=211241 Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-10genirq/msi: Activate Multi-MSI early when MSI_FLAG_ACTIVATE_EARLY is setMarc Zyngier1-0/+6
commit 4c457e8cb75eda91906a4f89fc39bde3f9a43922 upstream. When MSI_FLAG_ACTIVATE_EARLY is set (which is the case for PCI), __msi_domain_alloc_irqs() performs the activation of the interrupt (which in the case of PCI results in the endpoint being programmed) as soon as the interrupt is allocated. But it appears that this is only done for the first vector, introducing an inconsistent behaviour for PCI Multi-MSI. Fix it by iterating over the number of vectors allocated to each MSI descriptor. This is easily achieved by introducing a new "for_each_msi_vector" iterator, together with a tiny bit of refactoring. Fixes: f3b0946d629c ("genirq/msi: Make sure PCI MSIs are activated early") Reported-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210123122759.1781359-1-maz@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-10genirq: Prevent [devm_]irq_alloc_desc from returning irq 0Hans de Goede1-2/+2
commit 4c7bcb51ae25f79e3733982e5d0cd8ce8640ddfc upstream. Since commit a85a6c86c25b ("driver core: platform: Clarify that IRQ 0 is invalid"), having a linux-irq with number 0 will trigger a WARN() when calling platform_get_irq*() to retrieve that linux-irq. Since [devm_]irq_alloc_desc allocs a single irq and since irq 0 is not used on some systems, it can return 0, triggering that WARN(). This happens e.g. on Intel Bay Trail and Cherry Trail devices using the LPE audio engine for HDMI audio: 0 is an invalid IRQ number WARNING: CPU: 3 PID: 472 at drivers/base/platform.c:238 platform_get_irq_optional+0x108/0x180 Modules linked in: snd_hdmi_lpe_audio(+) ... Call Trace: platform_get_irq+0x17/0x30 hdmi_lpe_audio_probe+0x4a/0x6c0 [snd_hdmi_lpe_audio] ---[ end trace ceece38854223a0b ]--- Change the 'from' parameter passed to __[devm_]irq_alloc_descs() by the [devm_]irq_alloc_desc macros from 0 to 1, so that these macros will no longer return 0. Fixes: a85a6c86c25b ("driver core: platform: Clarify that IRQ 0 is invalid") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20201221185647.226146-1-hdegoede@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-08-21 12:56:47 +0300