summaryrefslogtreecommitdiff
path: root/include/linux
AgeCommit message (Collapse)AuthorFilesLines
2020-02-28ata: ahci: Add shutdown to freeze hardware resources of ahciPrabhakar Kushwaha1-0/+1
commit 10a663a1b15134a5a714aa515e11425a44d4fdf7 upstream. device_shutdown() called from reboot or power_shutdown expect all devices to be shutdown. Same is true for even ahci pci driver. As no ahci shutdown function is implemented, the ata subsystem always remains alive with DMA & interrupt support. File system related calls should not be honored after device_shutdown(). So defining ahci pci driver shutdown to freeze hardware (mask interrupt, stop DMA engine and free DMA resources). Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-28iommu/vt-d: Fix compile warning from intel-svm.hJoerg Roedel1-1/+1
commit e7598fac323aad0e502415edeffd567315994dd6 upstream. The intel_svm_is_pasid_valid() needs to be marked inline, otherwise it causes the compile warning below: CC [M] drivers/dma/idxd/cdev.o In file included from drivers/dma/idxd/cdev.c:9:0: ./include/linux/intel-svm.h:125:12: warning: ‘intel_svm_is_pasid_valid’ defined but not used [-Wunused-function] static int intel_svm_is_pasid_valid(struct device *dev, int pasid) ^~~~~~~~~~~~~~~~~~~~~~~~ Reported-by: Borislav Petkov <bp@alien8.de> Fixes: 15060aba71711 ('iommu/vt-d: Helper function to query if a pasid has any active users') Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-28serdev: ttyport: restore client ops on deregistrationJohan Hovold1-0/+2
commit 0c5aae59270fb1f827acce182786094c9ccf598e upstream. The serdev tty-port controller driver should reset the tty-port client operations also on deregistration to avoid a NULL-pointer dereference in case the port is later re-registered as a normal tty device. Note that this can only happen with tty drivers such as 8250 which have statically allocated port structures that can end up being reused and where a later registration would not register a serdev controller (e.g. due to registration errors or if the devicetree has been changed in between). Specifically, this can be an issue for any statically defined ports that would be registered by 8250 core when an 8250 driver is being unbound. Fixes: bed35c6dfa6a ("serdev: add a tty port controller driver") Cc: stable <stable@vger.kernel.org> # 4.11 Reported-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20200210145730.22762-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-28rcu: Use WRITE_ONCE() for assignments to ->pprev for hlist_nullsPaul E. McKenney2-8/+8
[ Upstream commit 860c8802ace14c646864795e057349c9fb2d60ad ] Eric Dumazet supplied a KCSAN report of a bug that forces use of hlist_unhashed_lockless() from sk_unhashed(): ------------------------------------------------------------------------ BUG: KCSAN: data-race in inet_unhash / inet_unhash write to 0xffff8880a69a0170 of 8 bytes by interrupt on cpu 1: __hlist_nulls_del include/linux/list_nulls.h:88 [inline] hlist_nulls_del_init_rcu include/linux/rculist_nulls.h:36 [inline] __sk_nulls_del_node_init_rcu include/net/sock.h:676 [inline] inet_unhash+0x38f/0x4a0 net/ipv4/inet_hashtables.c:612 tcp_set_state+0xfa/0x3e0 net/ipv4/tcp.c:2249 tcp_done+0x93/0x1e0 net/ipv4/tcp.c:3854 tcp_write_err+0x7e/0xc0 net/ipv4/tcp_timer.c:56 tcp_retransmit_timer+0x9b8/0x16d0 net/ipv4/tcp_timer.c:479 tcp_write_timer_handler+0x42d/0x510 net/ipv4/tcp_timer.c:599 tcp_write_timer+0xd1/0xf0 net/ipv4/tcp_timer.c:619 call_timer_fn+0x5f/0x2f0 kernel/time/timer.c:1404 expire_timers kernel/time/timer.c:1449 [inline] __run_timers kernel/time/timer.c:1773 [inline] __run_timers kernel/time/timer.c:1740 [inline] run_timer_softirq+0xc0c/0xcd0 kernel/time/timer.c:1786 __do_softirq+0x115/0x33f kernel/softirq.c:292 invoke_softirq kernel/softirq.c:373 [inline] irq_exit+0xbb/0xe0 kernel/softirq.c:413 exiting_irq arch/x86/include/asm/apic.h:536 [inline] smp_apic_timer_interrupt+0xe6/0x280 arch/x86/kernel/apic/apic.c:1137 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:830 native_safe_halt+0xe/0x10 arch/x86/kernel/paravirt.c:71 arch_cpu_idle+0x1f/0x30 arch/x86/kernel/process.c:571 default_idle_call+0x1e/0x40 kernel/sched/idle.c:94 cpuidle_idle_call kernel/sched/idle.c:154 [inline] do_idle+0x1af/0x280 kernel/sched/idle.c:263 cpu_startup_entry+0x1b/0x20 kernel/sched/idle.c:355 start_secondary+0x208/0x260 arch/x86/kernel/smpboot.c:264 secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:241 read to 0xffff8880a69a0170 of 8 bytes by interrupt on cpu 0: sk_unhashed include/net/sock.h:607 [inline] inet_unhash+0x3d/0x4a0 net/ipv4/inet_hashtables.c:592 tcp_set_state+0xfa/0x3e0 net/ipv4/tcp.c:2249 tcp_done+0x93/0x1e0 net/ipv4/tcp.c:3854 tcp_write_err+0x7e/0xc0 net/ipv4/tcp_timer.c:56 tcp_retransmit_timer+0x9b8/0x16d0 net/ipv4/tcp_timer.c:479 tcp_write_timer_handler+0x42d/0x510 net/ipv4/tcp_timer.c:599 tcp_write_timer+0xd1/0xf0 net/ipv4/tcp_timer.c:619 call_timer_fn+0x5f/0x2f0 kernel/time/timer.c:1404 expire_timers kernel/time/timer.c:1449 [inline] __run_timers kernel/time/timer.c:1773 [inline] __run_timers kernel/time/timer.c:1740 [inline] run_timer_softirq+0xc0c/0xcd0 kernel/time/timer.c:1786 __do_softirq+0x115/0x33f kernel/softirq.c:292 invoke_softirq kernel/softirq.c:373 [inline] irq_exit+0xbb/0xe0 kernel/softirq.c:413 exiting_irq arch/x86/include/asm/apic.h:536 [inline] smp_apic_timer_interrupt+0xe6/0x280 arch/x86/kernel/apic/apic.c:1137 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:830 native_safe_halt+0xe/0x10 arch/x86/kernel/paravirt.c:71 arch_cpu_idle+0x1f/0x30 arch/x86/kernel/process.c:571 default_idle_call+0x1e/0x40 kernel/sched/idle.c:94 cpuidle_idle_call kernel/sched/idle.c:154 [inline] do_idle+0x1af/0x280 kernel/sched/idle.c:263 cpu_startup_entry+0x1b/0x20 kernel/sched/idle.c:355 rest_init+0xec/0xf6 init/main.c:452 arch_call_rest_init+0x17/0x37 start_kernel+0x838/0x85e init/main.c:786 x86_64_start_reservations+0x29/0x2b arch/x86/kernel/head64.c:490 x86_64_start_kernel+0x72/0x76 arch/x86/kernel/head64.c:471 secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:241 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.0-rc6+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 ------------------------------------------------------------------------ This commit therefore replaces C-language assignments with WRITE_ONCE() in include/linux/list_nulls.h and include/linux/rculist_nulls.h. Reported-by: Eric Dumazet <edumazet@google.com> # For KCSAN Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-02-28dmaengine: Store module owner in dma_device structLogan Gunthorpe1-0/+2
[ Upstream commit dae7a589c18a4d979d5f14b09374e871b995ceb1 ] dma_chan_to_owner() dereferences the driver from the struct device to obtain the owner and call module_[get|put](). However, if the backing device is unbound before the dma_device is unregistered, the driver will be cleared and this will cause a NULL pointer dereference. Instead, store a pointer to the owner module in the dma_device struct so the module reference can be properly put when the channel is put, even if the backing device was destroyed first. This change helps to support a safer unbind of DMA engines. If the dma_device is unregistered in the driver's remove function, there's no guarantee that there are no existing clients and a users action may trigger the WARN_ONCE in dma_async_device_unregister() which is unlikely to leave the system in a consistent state. Instead, a better approach is to allow the backing driver to go away and fail any subsequent requests to it. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Link: https://lore.kernel.org/r/20191216190120.21374-2-logang@deltatee.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-02-15KVM: Use vcpu-specific gva->hva translation when querying host page sizeSean Christopherson1-1/+1
[ Upstream commit f9b84e19221efc5f493156ee0329df3142085f28 ] Use kvm_vcpu_gfn_to_hva() when retrieving the host page size so that the correct set of memslots is used when handling x86 page faults in SMM. Fixes: 54bf36aac520 ("KVM: x86: use vcpu-specific functions to read/write/translate GFNs") Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-02-05USB: serial: ir-usb: fix link-speed handlingJohan Hovold1-1/+12
commit 17a0184ca17e288decdca8b2841531e34d49285f upstream. Commit e0d795e4f36c ("usb: irda: cleanup on ir-usb module") added a USB IrDA header with common defines, but mistakingly switched to using the class-descriptor baud-rate bitmask values for the outbound header. This broke link-speed handling for rates above 9600 baud, but a device would also be able to operate at the default 9600 baud until a link-speed request was issued (e.g. using the TCGETS ioctl). Fixes: e0d795e4f36c ("usb: irda: cleanup on ir-usb module") Cc: stable <stable@vger.kernel.org> # 2.6.27 Cc: Felipe Balbi <balbi@kernel.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-29netfilter: ipset: use bitmap infrastructure completelyKadlecsik József1-7/+0
commit 32c72165dbd0e246e69d16a3ad348a4851afd415 upstream. The bitmap allocation did not use full unsigned long sizes when calculating the required size and that was triggered by KASAN as slab-out-of-bounds read in several places. The patch fixes all of them. Reported-by: syzbot+fabca5cbf5e54f3fe2de@syzkaller.appspotmail.com Reported-by: syzbot+827ced406c9a1d9570ed@syzkaller.appspotmail.com Reported-by: syzbot+190d63957b22ef673ea5@syzkaller.appspotmail.com Reported-by: syzbot+dfccdb2bdb4a12ad425e@syzkaller.appspotmail.com Reported-by: syzbot+df0d0f5895ef1f41a65b@syzkaller.appspotmail.com Reported-by: syzbot+b08bd19bb37513357fd4@syzkaller.appspotmail.com Reported-by: syzbot+53cdd0ec0bbabd53370a@syzkaller.appspotmail.com Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-29bitmap: Add bitmap_alloc(), bitmap_zalloc() and bitmap_free()Andy Shevchenko1-0/+8
commit c42b65e363ce97a828f81b59033c3558f8fa7f70 upstream. A lot of code become ugly because of open coding allocations for bitmaps. Introduce three helpers to allow users be more clear of intention and keep their code neat. Note, due to multiple circular dependencies we may not provide the helpers as inliners. For now we keep them exported and, perhaps, at some point in the future we will sort out header inclusion and inheritance. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-29net: rtnetlink: validate IFLA_MTU attribute in rtnl_create_link()Eric Dumazet1-0/+1
[ Upstream commit d836f5c69d87473ff65c06a6123e5b2cf5e56f5b ] rtnl_create_link() needs to apply dev->min_mtu and dev->max_mtu checks that we apply in do_setlink() Otherwise malicious users can crash the kernel, for example after an integer overflow : BUG: KASAN: use-after-free in memset include/linux/string.h:365 [inline] BUG: KASAN: use-after-free in __alloc_skb+0x37b/0x5e0 net/core/skbuff.c:238 Write of size 32 at addr ffff88819f20b9c0 by task swapper/0/0 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.5.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x197/0x210 lib/dump_stack.c:118 print_address_description.constprop.0.cold+0xd4/0x30b mm/kasan/report.c:374 __kasan_report.cold+0x1b/0x41 mm/kasan/report.c:506 kasan_report+0x12/0x20 mm/kasan/common.c:639 check_memory_region_inline mm/kasan/generic.c:185 [inline] check_memory_region+0x134/0x1a0 mm/kasan/generic.c:192 memset+0x24/0x40 mm/kasan/common.c:108 memset include/linux/string.h:365 [inline] __alloc_skb+0x37b/0x5e0 net/core/skbuff.c:238 alloc_skb include/linux/skbuff.h:1049 [inline] alloc_skb_with_frags+0x93/0x590 net/core/skbuff.c:5664 sock_alloc_send_pskb+0x7ad/0x920 net/core/sock.c:2242 sock_alloc_send_skb+0x32/0x40 net/core/sock.c:2259 mld_newpack+0x1d7/0x7f0 net/ipv6/mcast.c:1609 add_grhead.isra.0+0x299/0x370 net/ipv6/mcast.c:1713 add_grec+0x7db/0x10b0 net/ipv6/mcast.c:1844 mld_send_cr net/ipv6/mcast.c:1970 [inline] mld_ifc_timer_expire+0x3d3/0x950 net/ipv6/mcast.c:2477 call_timer_fn+0x1ac/0x780 kernel/time/timer.c:1404 expire_timers kernel/time/timer.c:1449 [inline] __run_timers kernel/time/timer.c:1773 [inline] __run_timers kernel/time/timer.c:1740 [inline] run_timer_softirq+0x6c3/0x1790 kernel/time/timer.c:1786 __do_softirq+0x262/0x98c kernel/softirq.c:292 invoke_softirq kernel/softirq.c:373 [inline] irq_exit+0x19b/0x1e0 kernel/softirq.c:413 exiting_irq arch/x86/include/asm/apic.h:536 [inline] smp_apic_timer_interrupt+0x1a3/0x610 arch/x86/kernel/apic/apic.c:1137 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:829 </IRQ> RIP: 0010:native_safe_halt+0xe/0x10 arch/x86/include/asm/irqflags.h:61 Code: 98 6b ea f9 eb 8a cc cc cc cc cc cc e9 07 00 00 00 0f 00 2d 44 1c 60 00 f4 c3 66 90 e9 07 00 00 00 0f 00 2d 34 1c 60 00 fb f4 <c3> cc 55 48 89 e5 41 57 41 56 41 55 41 54 53 e8 4e 5d 9a f9 e8 79 RSP: 0018:ffffffff89807ce8 EFLAGS: 00000286 ORIG_RAX: ffffffffffffff13 RAX: 1ffffffff13266ae RBX: ffffffff8987a1c0 RCX: 0000000000000000 RDX: dffffc0000000000 RSI: 0000000000000006 RDI: ffffffff8987aa54 RBP: ffffffff89807d18 R08: ffffffff8987a1c0 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: dffffc0000000000 R13: ffffffff8a799980 R14: 0000000000000000 R15: 0000000000000000 arch_cpu_idle+0xa/0x10 arch/x86/kernel/process.c:690 default_idle_call+0x84/0xb0 kernel/sched/idle.c:94 cpuidle_idle_call kernel/sched/idle.c:154 [inline] do_idle+0x3c8/0x6e0 kernel/sched/idle.c:269 cpu_startup_entry+0x1b/0x20 kernel/sched/idle.c:361 rest_init+0x23b/0x371 init/main.c:451 arch_call_rest_init+0xe/0x1b start_kernel+0x904/0x943 init/main.c:784 x86_64_start_reservations+0x29/0x2b arch/x86/kernel/head64.c:490 x86_64_start_kernel+0x77/0x7b arch/x86/kernel/head64.c:471 secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:242 The buggy address belongs to the page: page:ffffea00067c82c0 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 raw: 057ffe0000000000 ffffea00067c82c8 ffffea00067c82c8 0000000000000000 raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88819f20b880: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff88819f20b900: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff >ffff88819f20b980: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ^ ffff88819f20ba00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff88819f20ba80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Fixes: 61e84623ace3 ("net: centralize net_device min/max MTU checking") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-27mmc: sdio: fix wl1251 vendor idH. Nikolaus Schaller1-0/+2
[ Upstream commit e5db673e7fe2f971ec82039a28dc0811c2100e87 ] v4.11-rc1 did introduce a patch series that rearranged the sdio quirks into a header file. Unfortunately this did forget to handle SDIO_VENDOR_ID_TI differently between wl1251 and wl1271 with the result that although the wl1251 was found on the sdio bus, the firmware did not load any more and there was no interface registration. This patch defines separate constants to be used by sdio quirks and drivers. Fixes: 884f38607897 ("mmc: core: move some sdio IDs out of quirks file") Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Cc: <stable@vger.kernel.org> # v4.11+ Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-27dmaengine: imx-sdma: fix size check for sdma script_numberRobin Gong1-0/+3
[ Upstream commit bd73dfabdda280fc5f05bdec79b6721b4b2f035f ] Illegal memory will be touch if SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V3 (41) exceed the size of structure sdma_script_start_addrs(40), thus cause memory corrupt such as slob block header so that kernel trap into while() loop forever in slob_free(). Please refer to below code piece in imx-sdma.c: for (i = 0; i < sdma->script_number; i++) if (addr_arr[i] > 0) saddr_arr[i] = addr_arr[i]; /* memory corrupt here */ That issue was brought by commit a572460be9cf ("dmaengine: imx-sdma: Add support for version 3 firmware") because SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V3 (38->41 3 scripts added) not align with script number added in sdma_script_start_addrs(2 scripts). Fixes: a572460be9cf ("dmaengine: imx-sdma: Add support for version 3 firmware") Cc: stable@vger.kernel Link: https://www.spinics.net/lists/arm-kernel/msg754895.html Signed-off-by: Robin Gong <yibin.gong@nxp.com> Reported-by: Jurgen Lambrecht <J.Lambrecht@TELEVIC.com> Link: https://lore.kernel.org/r/1569347584-3478-1-git-send-email-yibin.gong@nxp.com [vkoul: update the patch title] Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-27signal: Allow cifs and drbd to receive their terminating signalsEric W. Biederman1-1/+14
[ Upstream commit 33da8e7c814f77310250bb54a9db36a44c5de784 ] My recent to change to only use force_sig for a synchronous events wound up breaking signal reception cifs and drbd. I had overlooked the fact that by default kthreads start out with all signals set to SIG_IGN. So a change I thought was safe turned out to have made it impossible for those kernel thread to catch their signals. Reverting the work on force_sig is a bad idea because what the code was doing was very much a misuse of force_sig. As the way force_sig ultimately allowed the signal to happen was to change the signal handler to SIG_DFL. Which after the first signal will allow userspace to send signals to these kernel threads. At least for wake_ack_receiver in drbd that does not appear actively wrong. So correct this problem by adding allow_kernel_signal that will allow signals whose siginfo reports they were sent by the kernel through, but will not allow userspace generated signals, and update cifs and drbd to call allow_kernel_signal in an appropriate place so that their thread can receive this signal. Fixing things this way ensures that userspace won't be able to send signals and cause problems, that it is clear which signals the threads are expecting to receive, and it guarantees that nothing else in the system will be affected. This change was partly inspired by similar cifs and drbd patches that added allow_signal. Reported-by: ronnie sahlberg <ronniesahlberg@gmail.com> Reported-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Tested-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Cc: Steve French <smfrench@gmail.com> Cc: Philipp Reisner <philipp.reisner@linbit.com> Cc: David Laight <David.Laight@ACULAB.COM> Fixes: 247bc9470b1e ("cifs: fix rmmod regression in cifs.ko caused by force_sig changes") Fixes: 72abe3bcf091 ("signal/cifs: Fix cifs_put_tcp_session to call send_sig instead of force_sig") Fixes: fee109901f39 ("signal/drbd: Use send_sig not force_sig") Fixes: 3cf5d076fb4d ("signal: Remove task parameter from force_sig") Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-27net/mlx5: Fix mlx5_ifc_query_lag_out_bitsMark Zhang1-2/+0
[ Upstream commit ea77388b02270b0af8dc57f668f311235ea068f0 ] Remove the "reserved_at_40" field to match the device specification. Fixes: 84df61ebc69b ("net/mlx5: Add HW interfaces used by LAG") Signed-off-by: Mark Zhang <markz@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-27devres: allow const resource argumentsArnd Bergmann1-1/+2
[ Upstream commit 9dea44c91469512d346e638694c22c30a5273992 ] devm_ioremap_resource() does not currently take 'const' arguments, which results in a warning from the first driver trying to do it anyway: drivers/gpio/gpio-amd-fch.c: In function 'amd_fch_gpio_probe': drivers/gpio/gpio-amd-fch.c:171:49: error: passing argument 2 of 'devm_ioremap_resource' discards 'const' qualifier from pointer target type [-Werror=discarded-qualifiers] priv->base = devm_ioremap_resource(&pdev->dev, &amd_fch_gpio_iores); ^~~~~~~~~~~~~~~~~~~ Change the prototype to allow it, as there is no real reason not to. Fixes: 9bb2e0452508 ("gpio: amd: Make resource struct const") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20190628150049.1108048-1-arnd@arndb.de Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviwed-By: Enrico Weigelt <info@metux.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-27irqchip/gic-v3-its: fix some definitions of inner cacheability attributesHongbo Yao1-6/+6
[ Upstream commit 0f29456d08042134aff6e562d07a6365c841c4ad ] Some definitions of Inner Cacheability attibutes need to be corrected. Fixes: 8c828a535e29f ("irqchip/gicv3-its: Restore all cacheability attributes") Signed-off-by: Hongbo Yao <yaohongbo@huawei.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-23regulator: ab8500: Remove SYSCLKREQ from enum ab8505_regulator_idStephan Gerhold1-2/+0
commit 458ea3ad033fc86e291712ce50cbe60c3428cf30 upstream. Those regulators are not actually supported by the AB8500 regulator driver. There is no ab8500_regulator_info for them and no entry in ab8505_regulator_match. As such, they cannot be registered successfully, and looking them up in ab8505_regulator_match causes an out-of-bounds array read. Fixes: 547f384f33db ("regulator: ab8500: add support for ab8505") Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20191106173125.14496-2-stephan@gerhold.net Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-23block: fix an integer overflow in logical block sizeMikulas Patocka1-4/+4
commit ad6bf88a6c19a39fb3b0045d78ea880325dfcf15 upstream. Logical block size has type unsigned short. That means that it can be at most 32768. However, there are architectures that can run with 64k pages (for example arm64) and on these architectures, it may be possible to create block devices with 64k block size. For exmaple (run this on an architecture with 64k pages): Mount will fail with this error because it tries to read the superblock using 2-sector access: device-mapper: writecache: I/O is not aligned, sector 2, size 1024, block size 65536 EXT4-fs (dm-0): unable to read superblock This patch changes the logical block size from unsigned short to unsigned int to avoid the overflow. Cc: stable@vger.kernel.org Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-17fs/select: avoid clang stack usage warningArnd Bergmann1-0/+4
commit ad312f95d41c9de19313c51e388c4984451c010f upstream. The select() implementation is carefully tuned to put a sensible amount of data on the stack for holding a copy of the user space fd_set, but not too large to risk overflowing the kernel stack. When building a 32-bit kernel with clang, we need a little more space than with gcc, which often triggers a warning: fs/select.c:619:5: error: stack frame size of 1048 bytes in function 'core_sys_select' [-Werror,-Wframe-larger-than=] int core_sys_select(int n, fd_set __user *inp, fd_set __user *outp, I experimentally found that for 32-bit ARM, reducing the maximum stack usage by 64 bytes keeps us reliably under the warning limit again. Link: http://lkml.kernel.org/r/20190307090146.1874906-1-arnd@arndb.de Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Andi Kleen <ak@linux.intel.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Cc: Eric Dumazet <edumazet@google.com> Cc: "Darrick J. Wong" <darrick.wong@oracle.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Miles Chen <miles.chen@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-14can: can_dropped_invalid_skb(): ensure an initialized headroom in outgoing ↵Oliver Hartkopp1-0/+34
CAN sk_buffs commit e7153bf70c3496bac00e7e4f395bb8d8394ac0ea upstream. KMSAN sysbot detected a read access to an untinitialized value in the headroom of an outgoing CAN related sk_buff. When using CAN sockets this area is filled appropriately - but when using a packet socket this initialization is missing. The problematic read access occurs in the CAN receive path which can only be triggered when the sk_buff is sent through a (virtual) CAN interface. So we check in the sending path whether we need to perform the missing initializations. Fixes: d3b58c47d330d ("can: replace timestamp as unique skb attribute") Reported-by: syzbot+b02ff0707a97e4e79ebb@syzkaller.appspotmail.com Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Tested-by: Oliver Hartkopp <socketcan@hartkopp.net> Cc: linux-stable <stable@vger.kernel.org> # >= v4.1 Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-12macvlan: do not assume mac_header is set in macvlan_broadcast()Eric Dumazet1-0/+8
[ Upstream commit 96cc4b69581db68efc9749ef32e9cf8e0160c509 ] Use of eth_hdr() in tx path is error prone. Many drivers call skb_reset_mac_header() before using it, but others do not. Commit 6d1ccff62780 ("net: reset mac header in dev_start_xmit()") attempted to fix this generically, but commit d346a3fae3ff ("packet: introduce PACKET_QDISC_BYPASS socket option") brought back the macvlan bug. Lets add a new helper, so that tx paths no longer have to call skb_reset_mac_header() only to get a pointer to skb->data. Hopefully we will be able to revert 6d1ccff62780 ("net: reset mac header in dev_start_xmit()") and save few cycles in transmit fast path. BUG: KASAN: use-after-free in __get_unaligned_cpu32 include/linux/unaligned/packed_struct.h:19 [inline] BUG: KASAN: use-after-free in mc_hash drivers/net/macvlan.c:251 [inline] BUG: KASAN: use-after-free in macvlan_broadcast+0x547/0x620 drivers/net/macvlan.c:277 Read of size 4 at addr ffff8880a4932401 by task syz-executor947/9579 CPU: 0 PID: 9579 Comm: syz-executor947 Not tainted 5.5.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x197/0x210 lib/dump_stack.c:118 print_address_description.constprop.0.cold+0xd4/0x30b mm/kasan/report.c:374 __kasan_report.cold+0x1b/0x41 mm/kasan/report.c:506 kasan_report+0x12/0x20 mm/kasan/common.c:639 __asan_report_load_n_noabort+0xf/0x20 mm/kasan/generic_report.c:145 __get_unaligned_cpu32 include/linux/unaligned/packed_struct.h:19 [inline] mc_hash drivers/net/macvlan.c:251 [inline] macvlan_broadcast+0x547/0x620 drivers/net/macvlan.c:277 macvlan_queue_xmit drivers/net/macvlan.c:520 [inline] macvlan_start_xmit+0x402/0x77f drivers/net/macvlan.c:559 __netdev_start_xmit include/linux/netdevice.h:4447 [inline] netdev_start_xmit include/linux/netdevice.h:4461 [inline] dev_direct_xmit+0x419/0x630 net/core/dev.c:4079 packet_direct_xmit+0x1a9/0x250 net/packet/af_packet.c:240 packet_snd net/packet/af_packet.c:2966 [inline] packet_sendmsg+0x260d/0x6220 net/packet/af_packet.c:2991 sock_sendmsg_nosec net/socket.c:639 [inline] sock_sendmsg+0xd7/0x130 net/socket.c:659 __sys_sendto+0x262/0x380 net/socket.c:1985 __do_sys_sendto net/socket.c:1997 [inline] __se_sys_sendto net/socket.c:1993 [inline] __x64_sys_sendto+0xe1/0x1a0 net/socket.c:1993 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x442639 Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 5b 10 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007ffc13549e08 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000442639 RDX: 000000000000000e RSI: 0000000020000080 RDI: 0000000000000003 RBP: 0000000000000004 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000403bb0 R14: 0000000000000000 R15: 0000000000000000 Allocated by task 9389: save_stack+0x23/0x90 mm/kasan/common.c:72 set_track mm/kasan/common.c:80 [inline] __kasan_kmalloc mm/kasan/common.c:513 [inline] __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:486 kasan_kmalloc+0x9/0x10 mm/kasan/common.c:527 __do_kmalloc mm/slab.c:3656 [inline] __kmalloc+0x163/0x770 mm/slab.c:3665 kmalloc include/linux/slab.h:561 [inline] tomoyo_realpath_from_path+0xc5/0x660 security/tomoyo/realpath.c:252 tomoyo_get_realpath security/tomoyo/file.c:151 [inline] tomoyo_path_perm+0x230/0x430 security/tomoyo/file.c:822 tomoyo_inode_getattr+0x1d/0x30 security/tomoyo/tomoyo.c:129 security_inode_getattr+0xf2/0x150 security/security.c:1222 vfs_getattr+0x25/0x70 fs/stat.c:115 vfs_statx_fd+0x71/0xc0 fs/stat.c:145 vfs_fstat include/linux/fs.h:3265 [inline] __do_sys_newfstat+0x9b/0x120 fs/stat.c:378 __se_sys_newfstat fs/stat.c:375 [inline] __x64_sys_newfstat+0x54/0x80 fs/stat.c:375 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 9389: save_stack+0x23/0x90 mm/kasan/common.c:72 set_track mm/kasan/common.c:80 [inline] kasan_set_free_info mm/kasan/common.c:335 [inline] __kasan_slab_free+0x102/0x150 mm/kasan/common.c:474 kasan_slab_free+0xe/0x10 mm/kasan/common.c:483 __cache_free mm/slab.c:3426 [inline] kfree+0x10a/0x2c0 mm/slab.c:3757 tomoyo_realpath_from_path+0x1a7/0x660 security/tomoyo/realpath.c:289 tomoyo_get_realpath security/tomoyo/file.c:151 [inline] tomoyo_path_perm+0x230/0x430 security/tomoyo/file.c:822 tomoyo_inode_getattr+0x1d/0x30 security/tomoyo/tomoyo.c:129 security_inode_getattr+0xf2/0x150 security/security.c:1222 vfs_getattr+0x25/0x70 fs/stat.c:115 vfs_statx_fd+0x71/0xc0 fs/stat.c:145 vfs_fstat include/linux/fs.h:3265 [inline] __do_sys_newfstat+0x9b/0x120 fs/stat.c:378 __se_sys_newfstat fs/stat.c:375 [inline] __x64_sys_newfstat+0x54/0x80 fs/stat.c:375 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8880a4932000 which belongs to the cache kmalloc-4k of size 4096 The buggy address is located 1025 bytes inside of 4096-byte region [ffff8880a4932000, ffff8880a4933000) The buggy address belongs to the page: page:ffffea0002924c80 refcount:1 mapcount:0 mapping:ffff8880aa402000 index:0x0 compound_mapcount: 0 raw: 00fffe0000010200 ffffea0002846208 ffffea00028f3888 ffff8880aa402000 raw: 0000000000000000 ffff8880a4932000 0000000100000001 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8880a4932300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8880a4932380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8880a4932400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8880a4932480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8880a4932500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb Fixes: b863ceb7ddce ("[NET]: Add macvlan driver") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-09regulator: ab8500: Remove AB8505 USB regulatorStephan Gerhold1-1/+0
commit 99c4f70df3a6446c56ca817c2d0f9c12d85d4e7c upstream. The USB regulator was removed for AB8500 in commit 41a06aa738ad ("regulator: ab8500: Remove USB regulator"). It was then added for AB8505 in commit 547f384f33db ("regulator: ab8500: add support for ab8505"). However, there was never an entry added for it in ab8505_regulator_match. This causes all regulators after it to be initialized with the wrong device tree data, eventually leading to an out-of-bounds array read. Given that it is not used anywhere in the kernel, it seems likely that similar arguments against supporting it exist for AB8505 (it is controlled by hardware). Therefore, simply remove it like for AB8500 instead of adding an entry in ab8505_regulator_match. Fixes: 547f384f33db ("regulator: ab8500: add support for ab8505") Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20191106173125.14496-1-stephan@gerhold.net Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-09ata: libahci_platform: Export again ahci_platform_<en/dis>able_phys()Florian Fainelli1-0/+2
commit 84b032dbfdf1c139cd2b864e43959510646975f8 upstream. This reverts commit 6bb86fefa086faba7b60bb452300b76a47cde1a5 ("libahci_platform: Staticize ahci_platform_<en/dis>able_phys()") we are going to need ahci_platform_{enable,disable}_phys() in a subsequent commit for ahci_brcm.c in order to properly control the PHY initialization order. Also make sure the function prototypes are declared in include/linux/ahci_platform.h as a result. Cc: stable@vger.kernel.org Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-09dmaengine: Fix access to uninitialized dma_slave_capsLukas Wunner1-1/+4
commit 53a256a9b925b47c7e67fc1f16ca41561a7b877c upstream. dmaengine_desc_set_reuse() allocates a struct dma_slave_caps on the stack, populates it using dma_get_slave_caps() and then accesses one of its members. However dma_get_slave_caps() may fail and this isn't accounted for, leading to a legitimate warning of gcc-4.9 (but not newer versions): In file included from drivers/spi/spi-bcm2835.c:19:0: drivers/spi/spi-bcm2835.c: In function 'dmaengine_desc_set_reuse': >> include/linux/dmaengine.h:1370:10: warning: 'caps.descriptor_reuse' is used uninitialized in this function [-Wuninitialized] if (caps.descriptor_reuse) { Fix it, thereby also silencing the gcc-4.9 warning. The issue has been present for 4 years but surfaces only now that the first caller of dmaengine_desc_set_reuse() has been added in spi-bcm2835.c. Another user of reusable DMA descriptors has existed for a while in pxa_camera.c, but it sets the DMA_CTRL_REUSE flag directly instead of calling dmaengine_desc_set_reuse(). Nevertheless, tag this commit for stable in case there are out-of-tree users. Fixes: 272420214d26 ("dmaengine: Add DMA_CTRL_REUSE") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Cc: stable@vger.kernel.org # v4.3+ Link: https://lore.kernel.org/r/ca92998ccc054b4f2bfd60ef3adbab2913171eac.1575546234.git.lukas@wunner.de Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-09nvme_fc: add module to ops template to allow module referencesJames Smart1-0/+4
[ Upstream commit 863fbae929c7a5b64e96b8a3ffb34a29eefb9f8f ] In nvme-fc: it's possible to have connected active controllers and as no references are taken on the LLDD, the LLDD can be unloaded. The controller would enter a reconnect state and as long as the LLDD resumed within the reconnect timeout, the controller would resume. But if a namespace on the controller is the root device, allowing the driver to unload can be problematic. To reload the driver, it may require new io to the boot device, and as it's no longer connected we get into a catch-22 that eventually fails, and the system locks up. Fix this issue by taking a module reference for every connected controller (which is what the core layer did to the transport module). Reference is cleared when the controller is removed. Acked-by: Himanshu Madhani <hmadhani@marvell.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-04tcp/dccp: fix possible race __inet_lookup_established()Eric Dumazet1-0/+37
commit 8dbd76e79a16b45b2ccb01d2f2e08dbf64e71e40 upstream. Michal Kubecek and Firo Yang did a very nice analysis of crashes happening in __inet_lookup_established(). Since a TCP socket can go from TCP_ESTABLISH to TCP_LISTEN (via a close()/socket()/listen() cycle) without a RCU grace period, I should not have changed listeners linkage in their hash table. They must use the nulls protocol (Documentation/RCU/rculist_nulls.txt), so that a lookup can detect a socket in a hash list was moved in another one. Since we added code in commit d296ba60d8e2 ("soreuseport: Resolve merge conflict for v4/v6 ordering fix"), we have to add hlist_nulls_add_tail_rcu() helper. Fixes: 3b24d854cb35 ("tcp/dccp: do not touch listener sk_refcnt under synflood") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Michal Kubecek <mkubecek@suse.cz> Reported-by: Firo Yang <firo.yang@suse.com> Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Link: https://lore.kernel.org/netdev/20191120083919.GH27852@unicorn.suse.cz/ Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> [stable-4.14: we also need to update code in __inet_lookup_listener() and inet6_lookup_listener() which has been removed in 5.0-rc1.] Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-04ptp: fix the race between the release of ptp_clock and cdevVladis Dronov1-8/+11
[ Upstream commit a33121e5487b424339636b25c35d3a180eaa5f5e ] In a case when a ptp chardev (like /dev/ptp0) is open but an underlying device is removed, closing this file leads to a race. This reproduces easily in a kvm virtual machine: ts# cat openptp0.c int main() { ... fp = fopen("/dev/ptp0", "r"); ... sleep(10); } ts# uname -r 5.5.0-rc3-46cf053e ts# cat /proc/cmdline ... slub_debug=FZP ts# modprobe ptp_kvm ts# ./openptp0 & [1] 670 opened /dev/ptp0, sleeping 10s... ts# rmmod ptp_kvm ts# ls /dev/ptp* ls: cannot access '/dev/ptp*': No such file or directory ts# ...woken up [ 48.010809] general protection fault: 0000 [#1] SMP [ 48.012502] CPU: 6 PID: 658 Comm: openptp0 Not tainted 5.5.0-rc3-46cf053e #25 [ 48.014624] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), ... [ 48.016270] RIP: 0010:module_put.part.0+0x7/0x80 [ 48.017939] RSP: 0018:ffffb3850073be00 EFLAGS: 00010202 [ 48.018339] RAX: 000000006b6b6b6b RBX: 6b6b6b6b6b6b6b6b RCX: ffff89a476c00ad0 [ 48.018936] RDX: fffff65a08d3ea08 RSI: 0000000000000247 RDI: 6b6b6b6b6b6b6b6b [ 48.019470] ... ^^^ a slub poison [ 48.023854] Call Trace: [ 48.024050] __fput+0x21f/0x240 [ 48.024288] task_work_run+0x79/0x90 [ 48.024555] do_exit+0x2af/0xab0 [ 48.024799] ? vfs_write+0x16a/0x190 [ 48.025082] do_group_exit+0x35/0x90 [ 48.025387] __x64_sys_exit_group+0xf/0x10 [ 48.025737] do_syscall_64+0x3d/0x130 [ 48.026056] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 48.026479] RIP: 0033:0x7f53b12082f6 [ 48.026792] ... [ 48.030945] Modules linked in: ptp i6300esb watchdog [last unloaded: ptp_kvm] [ 48.045001] Fixing recursive fault but reboot is needed! This happens in: static void __fput(struct file *file) { ... if (file->f_op->release) file->f_op->release(inode, file); <<< cdev is kfree'd here if (unlikely(S_ISCHR(inode->i_mode) && inode->i_cdev != NULL && !(mode & FMODE_PATH))) { cdev_put(inode->i_cdev); <<< cdev fields are accessed here Namely: __fput() posix_clock_release() kref_put(&clk->kref, delete_clock) <<< the last reference delete_clock() delete_ptp_clock() kfree(ptp) <<< cdev is embedded in ptp cdev_put module_put(p->owner) <<< *p is kfree'd, bang! Here cdev is embedded in posix_clock which is embedded in ptp_clock. The race happens because ptp_clock's lifetime is controlled by two refcounts: kref and cdev.kobj in posix_clock. This is wrong. Make ptp_clock's sysfs device a parent of cdev with cdev_device_add() created especially for such cases. This way the parent device with its ptp_clock is not released until all references to the cdev are released. This adds a requirement that an initialized but not exposed struct device should be provided to posix_clock_register() by a caller instead of a simple dev_t. This approach was adopted from the commit 72139dfa2464 ("watchdog: Fix the race between the release of watchdog_core_data and cdev"). See details of the implementation in the commit 233ed09d7fda ("chardev: add helper function to register char devs with a struct device"). Link: https://lore.kernel.org/linux-fsdevel/20191125125342.6189-1-vdronov@redhat.com/T/#u Analyzed-by: Stephen Johnston <sjohnsto@redhat.com> Analyzed-by: Vern Lovejoy <vlovejoy@redhat.com> Signed-off-by: Vladis Dronov <vdronov@redhat.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-04hrtimer: Annotate lockless access to timer->stateEric Dumazet1-4/+10
commit 56144737e67329c9aaed15f942d46a6302e2e3d8 upstream. syzbot reported various data-race caused by hrtimer_is_queued() reading timer->state. A READ_ONCE() is required there to silence the warning. Also add the corresponding WRITE_ONCE() when timer->state is set. In remove_hrtimer() the hrtimer_is_queued() helper is open coded to avoid loading timer->state twice. KCSAN reported these cases: BUG: KCSAN: data-race in __remove_hrtimer / tcp_pacing_check write to 0xffff8880b2a7d388 of 1 bytes by interrupt on cpu 0: __remove_hrtimer+0x52/0x130 kernel/time/hrtimer.c:991 __run_hrtimer kernel/time/hrtimer.c:1496 [inline] __hrtimer_run_queues+0x250/0x600 kernel/time/hrtimer.c:1576 hrtimer_run_softirq+0x10e/0x150 kernel/time/hrtimer.c:1593 __do_softirq+0x115/0x33f kernel/softirq.c:292 run_ksoftirqd+0x46/0x60 kernel/softirq.c:603 smpboot_thread_fn+0x37d/0x4a0 kernel/smpboot.c:165 kthread+0x1d4/0x200 drivers/block/aoe/aoecmd.c:1253 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:352 read to 0xffff8880b2a7d388 of 1 bytes by task 24652 on cpu 1: tcp_pacing_check net/ipv4/tcp_output.c:2235 [inline] tcp_pacing_check+0xba/0x130 net/ipv4/tcp_output.c:2225 tcp_xmit_retransmit_queue+0x32c/0x5a0 net/ipv4/tcp_output.c:3044 tcp_xmit_recovery+0x7c/0x120 net/ipv4/tcp_input.c:3558 tcp_ack+0x17b6/0x3170 net/ipv4/tcp_input.c:3717 tcp_rcv_established+0x37e/0xf50 net/ipv4/tcp_input.c:5696 tcp_v4_do_rcv+0x381/0x4e0 net/ipv4/tcp_ipv4.c:1561 sk_backlog_rcv include/net/sock.h:945 [inline] __release_sock+0x135/0x1e0 net/core/sock.c:2435 release_sock+0x61/0x160 net/core/sock.c:2951 sk_stream_wait_memory+0x3d7/0x7c0 net/core/stream.c:145 tcp_sendmsg_locked+0xb47/0x1f30 net/ipv4/tcp.c:1393 tcp_sendmsg+0x39/0x60 net/ipv4/tcp.c:1434 inet_sendmsg+0x6d/0x90 net/ipv4/af_inet.c:807 sock_sendmsg_nosec net/socket.c:637 [inline] sock_sendmsg+0x9f/0xc0 net/socket.c:657 BUG: KCSAN: data-race in __remove_hrtimer / __tcp_ack_snd_check write to 0xffff8880a3a65588 of 1 bytes by interrupt on cpu 0: __remove_hrtimer+0x52/0x130 kernel/time/hrtimer.c:991 __run_hrtimer kernel/time/hrtimer.c:1496 [inline] __hrtimer_run_queues+0x250/0x600 kernel/time/hrtimer.c:1576 hrtimer_run_softirq+0x10e/0x150 kernel/time/hrtimer.c:1593 __do_softirq+0x115/0x33f kernel/softirq.c:292 invoke_softirq kernel/softirq.c:373 [inline] irq_exit+0xbb/0xe0 kernel/softirq.c:413 exiting_irq arch/x86/include/asm/apic.h:536 [inline] smp_apic_timer_interrupt+0xe6/0x280 arch/x86/kernel/apic/apic.c:1137 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:830 read to 0xffff8880a3a65588 of 1 bytes by task 22891 on cpu 1: __tcp_ack_snd_check+0x415/0x4f0 net/ipv4/tcp_input.c:5265 tcp_ack_snd_check net/ipv4/tcp_input.c:5287 [inline] tcp_rcv_established+0x750/0xf50 net/ipv4/tcp_input.c:5708 tcp_v4_do_rcv+0x381/0x4e0 net/ipv4/tcp_ipv4.c:1561 sk_backlog_rcv include/net/sock.h:945 [inline] __release_sock+0x135/0x1e0 net/core/sock.c:2435 release_sock+0x61/0x160 net/core/sock.c:2951 sk_stream_wait_memory+0x3d7/0x7c0 net/core/stream.c:145 tcp_sendmsg_locked+0xb47/0x1f30 net/ipv4/tcp.c:1393 tcp_sendmsg+0x39/0x60 net/ipv4/tcp.c:1434 inet_sendmsg+0x6d/0x90 net/ipv4/af_inet.c:807 sock_sendmsg_nosec net/socket.c:637 [inline] sock_sendmsg+0x9f/0xc0 net/socket.c:657 __sys_sendto+0x21f/0x320 net/socket.c:1952 __do_sys_sendto net/socket.c:1964 [inline] __se_sys_sendto net/socket.c:1960 [inline] __x64_sys_sendto+0x89/0xb0 net/socket.c:1960 do_syscall_64+0xcc/0x370 arch/x86/entry/common.c:290 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 24652 Comm: syz-executor.3 Not tainted 5.4.0-rc3+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 [ tglx: Added comments ] Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20191106174804.74723-1-edumazet@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-04net: add a READ_ONCE() in skb_peek_tail()Eric Dumazet1-2/+4
commit f8cc62ca3e660ae3fdaee533b1d554297cd2ae82 upstream. skb_peek_tail() can be used without protection of a lock, as spotted by KCSAN [1] In order to avoid load-stearing, add a READ_ONCE() Note that the corresponding WRITE_ONCE() are already there. [1] BUG: KCSAN: data-race in sk_wait_data / skb_queue_tail read to 0xffff8880b36a4118 of 8 bytes by task 20426 on cpu 1: skb_peek_tail include/linux/skbuff.h:1784 [inline] sk_wait_data+0x15b/0x250 net/core/sock.c:2477 kcm_wait_data+0x112/0x1f0 net/kcm/kcmsock.c:1103 kcm_recvmsg+0xac/0x320 net/kcm/kcmsock.c:1130 sock_recvmsg_nosec net/socket.c:871 [inline] sock_recvmsg net/socket.c:889 [inline] sock_recvmsg+0x92/0xb0 net/socket.c:885 ___sys_recvmsg+0x1a0/0x3e0 net/socket.c:2480 do_recvmmsg+0x19a/0x5c0 net/socket.c:2601 __sys_recvmmsg+0x1ef/0x200 net/socket.c:2680 __do_sys_recvmmsg net/socket.c:2703 [inline] __se_sys_recvmmsg net/socket.c:2696 [inline] __x64_sys_recvmmsg+0x89/0xb0 net/socket.c:2696 do_syscall_64+0xcc/0x370 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x44/0xa9 write to 0xffff8880b36a4118 of 8 bytes by task 451 on cpu 0: __skb_insert include/linux/skbuff.h:1852 [inline] __skb_queue_before include/linux/skbuff.h:1958 [inline] __skb_queue_tail include/linux/skbuff.h:1991 [inline] skb_queue_tail+0x7e/0xc0 net/core/skbuff.c:3145 kcm_queue_rcv_skb+0x202/0x310 net/kcm/kcmsock.c:206 kcm_rcv_strparser+0x74/0x4b0 net/kcm/kcmsock.c:370 __strp_recv+0x348/0xf50 net/strparser/strparser.c:309 strp_recv+0x84/0xa0 net/strparser/strparser.c:343 tcp_read_sock+0x174/0x5c0 net/ipv4/tcp.c:1639 strp_read_sock+0xd4/0x140 net/strparser/strparser.c:366 do_strp_work net/strparser/strparser.c:414 [inline] strp_work+0x9a/0xe0 net/strparser/strparser.c:423 process_one_work+0x3d4/0x890 kernel/workqueue.c:2269 worker_thread+0xa0/0x800 kernel/workqueue.c:2415 kthread+0x1d4/0x200 drivers/block/aoe/aoecmd.c:1253 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:352 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 451 Comm: kworker/u4:3 Not tainted 5.4.0-rc3+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: kstrp strp_work Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-04libfdt: define INT32_MAX and UINT32_MAX in libfdt_env.hMasahiro Yamada1-0/+3
[ Upstream commit a8de1304b7df30e3a14f2a8b9709bb4ff31a0385 ] The DTC v1.5.1 added references to (U)INT32_MAX. This is no problem for user-space programs since <stdint.h> defines (U)INT32_MAX along with (u)int32_t. For the kernel space, libfdt_env.h needs to be adjusted before we pull in the changes. In the kernel, we usually use s/u32 instead of (u)int32_t for the fixed-width types. Accordingly, we already have S/U32_MAX for their max values. So, we should not add (U)INT32_MAX to <linux/limits.h> any more. Instead, add them to the in-kernel libfdt_env.h to compile the latest libfdt. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-04fs/quota: handle overflows of sysctl fs.quota.* and report as unsigned longKonstantin Khlebnikov1-1/+1
[ Upstream commit 6fcbcec9cfc7b3c6a2c1f1a23ebacedff7073e0a ] Quota statistics counted as 64-bit per-cpu counter. Reading sums per-cpu fractions as signed 64-bit int, filters negative values and then reports lower half as signed 32-bit int. Result may looks like: fs.quota.allocated_dquots = 22327 fs.quota.cache_hits = -489852115 fs.quota.drops = -487288718 fs.quota.free_dquots = 22083 fs.quota.lookups = -486883485 fs.quota.reads = 22327 fs.quota.syncs = 335064 fs.quota.writes = 3088689 Values bigger than 2^31-1 reported as negative. All counters except "allocated_dquots" and "free_dquots" are monotonic, thus they should be reported as is without filtering negative values. Kernel doesn't have generic helper for 64-bit sysctl yet, let's use at least unsigned long. Link: https://lore.kernel.org/r/157337934693.2078.9842146413181153727.stgit@buzz Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-31rfkill: allocate static minorMarcel Holtmann1-0/+1
[ Upstream commit 8670b2b8b029a6650d133486be9d2ace146fd29a ] udev has a feature of creating /dev/<node> device-nodes if it finds a devnode:<node> modalias. This allows for auto-loading of modules that provide the node. This requires to use a statically allocated minor number for misc character devices. However, rfkill uses dynamic minor numbers and prevents auto-loading of the module. So allocate the next static misc minor number and use it for rfkill. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Link: https://lore.kernel.org/r/20191024174042.19851-1-marcel@holtmann.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-31mod_devicetable: fix PHY module formatRussell King1-2/+2
[ Upstream commit d2ed49cf6c13e379c5819aa5ac20e1f9674ebc89 ] When a PHY is probed, if the top bit is set, we end up requesting a module with the string "mdio:-10101110000000100101000101010001" - the top bit is printed to a signed -1 value. This leads to the module not being loaded. Fix the module format string and the macro generating the values for it to ensure that we only print unsigned types and the top bit is always 0/1. We correctly end up with "mdio:10101110000000100101000101010001". Fixes: 8626d3b43280 ("phylib: Support phy module autoloading") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-21inet: protect against too small mtu values.Eric Dumazet1-0/+5
[ Upstream commit 501a90c945103e8627406763dac418f20f3837b2 ] syzbot was once again able to crash a host by setting a very small mtu on loopback device. Let's make inetdev_valid_mtu() available in include/net/ip.h, and use it in ip_setup_cork(), so that we protect both ip_append_page() and __ip_append_data() Also add a READ_ONCE() when the device mtu is read. Pairs this lockless read with one WRITE_ONCE() in __dev_set_mtu(), even if other code paths might write over this field. Add a big comment in include/linux/netdevice.h about dev->mtu needing READ_ONCE()/WRITE_ONCE() annotations. Hopefully we will add the missing ones in followup patches. [1] refcount_t: saturated; leaking memory. WARNING: CPU: 0 PID: 9464 at lib/refcount.c:22 refcount_warn_saturate+0x138/0x1f0 lib/refcount.c:22 Kernel panic - not syncing: panic_on_warn set ... CPU: 0 PID: 9464 Comm: syz-executor850 Not tainted 5.4.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x197/0x210 lib/dump_stack.c:118 panic+0x2e3/0x75c kernel/panic.c:221 __warn.cold+0x2f/0x3e kernel/panic.c:582 report_bug+0x289/0x300 lib/bug.c:195 fixup_bug arch/x86/kernel/traps.c:174 [inline] fixup_bug arch/x86/kernel/traps.c:169 [inline] do_error_trap+0x11b/0x200 arch/x86/kernel/traps.c:267 do_invalid_op+0x37/0x50 arch/x86/kernel/traps.c:286 invalid_op+0x23/0x30 arch/x86/entry/entry_64.S:1027 RIP: 0010:refcount_warn_saturate+0x138/0x1f0 lib/refcount.c:22 Code: 06 31 ff 89 de e8 c8 f5 e6 fd 84 db 0f 85 6f ff ff ff e8 7b f4 e6 fd 48 c7 c7 e0 71 4f 88 c6 05 56 a6 a4 06 01 e8 c7 a8 b7 fd <0f> 0b e9 50 ff ff ff e8 5c f4 e6 fd 0f b6 1d 3d a6 a4 06 31 ff 89 RSP: 0018:ffff88809689f550 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff815e4336 RDI: ffffed1012d13e9c RBP: ffff88809689f560 R08: ffff88809c50a3c0 R09: fffffbfff15d31b1 R10: fffffbfff15d31b0 R11: ffffffff8ae98d87 R12: 0000000000000001 R13: 0000000000040100 R14: ffff888099041104 R15: ffff888218d96e40 refcount_add include/linux/refcount.h:193 [inline] skb_set_owner_w+0x2b6/0x410 net/core/sock.c:1999 sock_wmalloc+0xf1/0x120 net/core/sock.c:2096 ip_append_page+0x7ef/0x1190 net/ipv4/ip_output.c:1383 udp_sendpage+0x1c7/0x480 net/ipv4/udp.c:1276 inet_sendpage+0xdb/0x150 net/ipv4/af_inet.c:821 kernel_sendpage+0x92/0xf0 net/socket.c:3794 sock_sendpage+0x8b/0xc0 net/socket.c:936 pipe_to_sendpage+0x2da/0x3c0 fs/splice.c:458 splice_from_pipe_feed fs/splice.c:512 [inline] __splice_from_pipe+0x3ee/0x7c0 fs/splice.c:636 splice_from_pipe+0x108/0x170 fs/splice.c:671 generic_splice_sendpage+0x3c/0x50 fs/splice.c:842 do_splice_from fs/splice.c:861 [inline] direct_splice_actor+0x123/0x190 fs/splice.c:1035 splice_direct_to_actor+0x3b4/0xa30 fs/splice.c:990 do_splice_direct+0x1da/0x2a0 fs/splice.c:1078 do_sendfile+0x597/0xd00 fs/read_write.c:1464 __do_sys_sendfile64 fs/read_write.c:1525 [inline] __se_sys_sendfile64 fs/read_write.c:1511 [inline] __x64_sys_sendfile64+0x1dd/0x220 fs/read_write.c:1511 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x441409 Code: e8 ac e8 ff ff 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 eb 08 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fffb64c4f78 EFLAGS: 00000246 ORIG_RAX: 0000000000000028 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000000000441409 RDX: 0000000000000000 RSI: 0000000000000006 RDI: 0000000000000005 RBP: 0000000000073b8a R08: 0000000000000010 R09: 0000000000000010 R10: 0000000000010001 R11: 0000000000000246 R12: 0000000000402180 R13: 0000000000402210 R14: 0000000000000000 R15: 0000000000000000 Kernel Offset: disabled Rebooting in 86400 seconds.. Fixes: 1470ddf7f8ce ("inet: Remove explicit write references to sk/inet in ip_append_data") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-21tcp: fix rejected syncookies due to stale timestampsGuillaume Nault1-0/+13
[ Upstream commit 04d26e7b159a396372646a480f4caa166d1b6720 ] If no synflood happens for a long enough period of time, then the synflood timestamp isn't refreshed and jiffies can advance so much that time_after32() can't accurately compare them any more. Therefore, we can end up in a situation where time_after32(now, last_overflow + HZ) returns false, just because these two values are too far apart. In that case, the synflood timestamp isn't updated as it should be, which can trick tcp_synq_no_recent_overflow() into rejecting valid syncookies. For example, let's consider the following scenario on a system with HZ=1000: * The synflood timestamp is 0, either because that's the timestamp of the last synflood or, more commonly, because we're working with a freshly created socket. * We receive a new SYN, which triggers synflood protection. Let's say that this happens when jiffies == 2147484649 (that is, 'synflood timestamp' + HZ + 2^31 + 1). * Then tcp_synq_overflow() doesn't update the synflood timestamp, because time_after32(2147484649, 1000) returns false. With: - 2147484649: the value of jiffies, aka. 'now'. - 1000: the value of 'last_overflow' + HZ. * A bit later, we receive the ACK completing the 3WHS. But cookie_v[46]_check() rejects it because tcp_synq_no_recent_overflow() says that we're not under synflood. That's because time_after32(2147484649, 120000) returns false. With: - 2147484649: the value of jiffies, aka. 'now'. - 120000: the value of 'last_overflow' + TCP_SYNCOOKIE_VALID. Of course, in reality jiffies would have increased a bit, but this condition will last for the next 119 seconds, which is far enough to accommodate for jiffie's growth. Fix this by updating the overflow timestamp whenever jiffies isn't within the [last_overflow, last_overflow + HZ] range. That shouldn't have any performance impact since the update still happens at most once per second. Now we're guaranteed to have fresh timestamps while under synflood, so tcp_synq_no_recent_overflow() can safely use it with time_after32() in such situations. Stale timestamps can still make tcp_synq_no_recent_overflow() return the wrong verdict when not under synflood. This will be handled in the next patch. For 64 bits architectures, the problem was introduced with the conversion of ->tw_ts_recent_stamp to 32 bits integer by commit cca9bab1b72c ("tcp: use monotonic timestamps for PAWS"). The problem has always been there on 32 bits architectures. Fixes: cca9bab1b72c ("tcp: use monotonic timestamps for PAWS") Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-17mfd: rk808: Fix RK818 ID templateDaniel Schultz1-1/+1
[ Upstream commit 37ef8c2c15bdc1322b160e38986c187de2b877b2 ] The Rockchip PMIC driver can automatically detect connected component versions by reading the ID_MSB and ID_LSB registers. The probe function will always fail with RK818 PMICs because the ID_MSK is 0xFFF0 and the RK818 template ID is 0x8181. This patch changes this value to 0x8180. Fixes: 9d6105e19f61 ("mfd: rk808: Fix up the chip id get failed") Cc: stable@vger.kernel.org Cc: Elaine Zhang <zhangqing@rock-chips.com> Cc: Joseph Chen <chenjh@rock-chips.com> Signed-off-by: Daniel Schultz <d.schultz@phytec.de> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-17quota: Check that quota is not dirty before releaseDmitry Monakhov1-0/+10
commit df4bb5d128e2c44848aeb36b7ceceba3ac85080d upstream. There is a race window where quota was redirted once we drop dq_list_lock inside dqput(), but before we grab dquot->dq_lock inside dquot_release() TASK1 TASK2 (chowner) ->dqput() we_slept: spin_lock(&dq_list_lock) if (dquot_dirty(dquot)) { spin_unlock(&dq_list_lock); dquot->dq_sb->dq_op->write_dquot(dquot); goto we_slept if (test_bit(DQ_ACTIVE_B, &dquot->dq_flags)) { spin_unlock(&dq_list_lock); dquot->dq_sb->dq_op->release_dquot(dquot); dqget() mark_dquot_dirty() dqput() goto we_slept; } So dquot dirty quota will be released by TASK1, but on next we_sleept loop we detect this and call ->write_dquot() for it. XFSTEST: https://github.com/dmonakhov/xfstests/commit/440a80d4cbb39e9234df4d7240aee1d551c36107 Link: https://lore.kernel.org/r/20191031103920.3919-2-dmonakhov@openvz.org CC: stable@vger.kernel.org Signed-off-by: Dmitry Monakhov <dmtrmonakhov@yandex-team.ru> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-17appletalk: Fix potential NULL pointer dereference in unregister_snap_clientYueHaibing1-1/+1
commit 9804501fa1228048857910a6bf23e085aade37cc upstream. register_snap_client may return NULL, all the callers check it, but only print a warning. This will result in NULL pointer dereference in unregister_snap_client and other places. It has always been used like this since v2.6 Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> [bwh: Backported to <4.15: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-17jbd2: Fix possible overflow in jbd2_log_space_left()Jan Kara1-2/+2
commit add3efdd78b8a0478ce423bb9d4df6bd95e8b335 upstream. When number of free space in the journal is very low, the arithmetic in jbd2_log_space_left() could underflow resulting in very high number of free blocks and thus triggering assertion failure in transaction commit code complaining there's not enough space in the journal: J_ASSERT(journal->j_free > 1); Properly check for the low number of free blocks. CC: stable@vger.kernel.org Reviewed-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20191105164437.32602-1-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-17kernfs: fix ino wrap-around detectionTejun Heo1-0/+1
commit e23f568aa63f64cd6b355094224cc9356c0f696b upstream. When the 32bit ino wraps around, kernfs increments the generation number to distinguish reused ino instances. The wrap-around detection tests whether the allocated ino is lower than what the cursor but the cursor is pointing to the next ino to allocate so the condition never triggers. Fix it by remembering the last ino and comparing against that. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Fixes: 4a3ef68acacf ("kernfs: implement i_generation") Cc: Namhyung Kim <namhyung@kernel.org> Cc: stable@vger.kernel.org # v4.14+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-17firmware: qcom: scm: fix compilation error when disabledJonathan Marek1-0/+3
[ Upstream commit 16ad9501b1f2edebe24f8cf3c09da0695871986b ] This fixes the case when CONFIG_QCOM_SCM is not enabled, and linux/errno.h has not been included previously. Signed-off-by: Jonathan Marek <jonathan@marek.ca> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-17tty: Don't block on IO when ldisc change is pendingDmitry Safonov1-0/+7
[ Upstream commit c96cf923a98d1b094df9f0cf97a83e118817e31b ] There might be situations where tty_ldisc_lock() has blocked, but there is already IO on tty and it prevents line discipline changes. It might theoretically turn into dead-lock. Basically, provide more priority to pending tty_ldisc_lock() than to servicing reads/writes over tty. User-visible issue was reported by Mikulas where on pa-risc with Debian 5 reboot took either 80 seconds, 3 minutes or 3:25 after proper locking in tty_reopen(). Cc: Jiri Slaby <jslaby@suse.com> Reported-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-17mtd: fix mtd_oobavail() incoherent returned valueMiquel Raynal1-1/+1
[ Upstream commit 4348433d8c0234f44adb6e12112e69343f50f0c5 ] mtd_oobavail() returns either mtd->oovabail or mtd->oobsize. Both values are unsigned 32-bit entities, so there is no reason to pretend returning a signed one. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-17dma-mapping: fix return type of dma_set_max_seg_size()Niklas Söderlund1-2/+1
[ Upstream commit c9d76d0655c06b8c1f944e46c4fd9e9cf4b331c0 ] The function dma_set_max_seg_size() can return either 0 on success or -EIO on error. Change its return type from unsigned int to int to capture this. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-17ACPI: fix acpi_find_child_device() invocation in acpi_preset_companion()Alexey Dobriyan1-1/+1
[ Upstream commit f8c6d1402b89f22a3647705d63cbd171aa19a77e ] acpi_find_child_device() accepts boolean not pointer as last argument. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> [ rjw: Subject ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-17dmaengine: dw-dmac: implement dma protection control settingChristian Lamparter1-0/+6
[ Upstream commit 7b0c03ecc42fb223baf015877fee9d517c2c8af1 ] This patch adds a new device-tree property that allows to specify the dma protection control bits for the all of the DMA controller's channel uniformly. Setting the "correct" bits can have a huge impact on the PPC460EX and APM82181 that use this DMA engine in combination with a DesignWare' SATA-II core (sata_dwc_460ex driver). In the OpenWrt Forum, the user takimata reported that: |It seems your patch unleashed the full power of the SATA port. |Where I was previously hitting a really hard limit at around |82 MB/s for reading and 27 MB/s for writing, I am now getting this: | |root@OpenWrt:/mnt# time dd if=/dev/zero of=tempfile bs=1M count=1024 |1024+0 records in |1024+0 records out |real 0m 13.65s |user 0m 0.01s |sys 0m 11.89s | |root@OpenWrt:/mnt# time dd if=tempfile of=/dev/null bs=1M count=1024 |1024+0 records in |1024+0 records out |real 0m 8.41s |user 0m 0.01s |sys 0m 4.70s | |This means: 121 MB/s reading and 75 MB/s writing! | |The drive is a WD Green WD10EARX taken from an older MBL Single. |I repeated the test a few times with even larger files to rule out |any caching, I'm still seeing the same great performance. OpenWrt is |now completely on par with the original MBL firmware's performance. Another user And.short reported: |I can report that your fix worked! Boots up fine with two |drives even with more partitions, and no more reboot on |concurrent disk access! A closer look into the sata_dwc_460ex code revealed that the driver did initally set the correct protection control bits. However, this feature was lost when the sata_dwc_460ex driver was converted to the generic DMA driver framework. BugLink: https://forum.openwrt.org/t/wd-mybook-live-duo-two-disks/16195/55 BugLink: https://forum.openwrt.org/t/wd-mybook-live-duo-two-disks/16195/50 Fixes: 8b3444852a2b ("sata_dwc_460ex: move to generic DMA driver") Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-17regulator: Fix return value of _set_load() stubMark Brown1-1/+1
[ Upstream commit f1abf67217de91f5cd3c757ae857632ca565099a ] The stub implementation of _set_load() returns a mode value which is within the bounds of valid return codes for success (the documentation just says that failures are negative error codes) but not sensible or what the actual implementation does. Fix it to just return 0. Reported-by: Cheng-Yi Chiang <cychiang@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-17serial: core: Allow processing sysrq at port unlock timeDouglas Anderson1-1/+36
[ Upstream commit d6e1935819db0c91ce4a5af82466f3ab50d17346 ] Right now serial drivers process sysrq keys deep in their character receiving code. This means that they've already grabbed their port->lock spinlock. This can end up getting in the way if we've go to do serial stuff (especially kgdb) in response to the sysrq. Serial drivers have various hacks in them to handle this. Looking at '8250_port.c' you can see that the console_write() skips locking if we're in the sysrq handler. Looking at 'msm_serial.c' you can see that the port lock is dropped around uart_handle_sysrq_char(). It turns out that these hacks aren't exactly perfect. If you have lockdep turned on and use something like the 8250_port hack you'll get a splat that looks like: WARNING: possible circular locking dependency detected [...] is trying to acquire lock: ... (console_owner){-.-.}, at: console_unlock+0x2e0/0x5e4 but task is already holding lock: ... (&port_lock_key){-.-.}, at: serial8250_handle_irq+0x30/0xe4 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&port_lock_key){-.-.}: _raw_spin_lock_irqsave+0x58/0x70 serial8250_console_write+0xa8/0x250 univ8250_console_write+0x40/0x4c console_unlock+0x528/0x5e4 register_console+0x2c4/0x3b0 uart_add_one_port+0x350/0x478 serial8250_register_8250_port+0x350/0x3a8 dw8250_probe+0x67c/0x754 platform_drv_probe+0x58/0xa4 really_probe+0x150/0x294 driver_probe_device+0xac/0xe8 __driver_attach+0x98/0xd0 bus_for_each_dev+0x84/0xc8 driver_attach+0x2c/0x34 bus_add_driver+0xf0/0x1ec driver_register+0xb4/0x100 __platform_driver_register+0x60/0x6c dw8250_platform_driver_init+0x20/0x28 ... -> #0 (console_owner){-.-.}: lock_acquire+0x1e8/0x214 console_unlock+0x35c/0x5e4 vprintk_emit+0x230/0x274 vprintk_default+0x7c/0x84 vprintk_func+0x190/0x1bc printk+0x80/0xa0 __handle_sysrq+0x104/0x21c handle_sysrq+0x30/0x3c serial8250_read_char+0x15c/0x18c serial8250_rx_chars+0x34/0x74 serial8250_handle_irq+0x9c/0xe4 dw8250_handle_irq+0x98/0xcc serial8250_interrupt+0x50/0xe8 ... other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&port_lock_key); lock(console_owner); lock(&port_lock_key); lock(console_owner); *** DEADLOCK *** The hack used in 'msm_serial.c' doesn't cause the above splats but it seems a bit ugly to unlock / lock our spinlock deep in our irq handler. It seems like we could defer processing the sysrq until the end of the interrupt handler right after we've unlocked the port. With this scheme if a whole batch of sysrq characters comes in one irq then we won't handle them all, but that seems like it should be a fine compromise. Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-05futex: Add mutex around futex exitThomas Gleixner2-0/+2
commit 3f186d974826847a07bc7964d79ec4eded475ad9 upstream. The mutex will be used in subsequent changes to replace the busy looping of a waiter when the futex owner is currently executing the exit cleanup to prevent a potential live lock. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20191106224556.845798895@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-05futex: Mark the begin of futex exit explicitlyThomas Gleixner1-28/+3
commit 18f694385c4fd77a09851fd301236746ca83f3cb upstream. Instead of relying on PF_EXITING use an explicit state for the futex exit and set it in the futex exit function. This moves the smp barrier and the lock/unlock serialization into the futex code. As with the DEAD state this is restricted to the exit path as exec continues to use the same task struct. This allows to simplify that logic in a next step. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20191106224556.539409004@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-08-20 23:49:34 +0300