summaryrefslogtreecommitdiff
path: root/include/linux
AgeCommit message (Collapse)AuthorFilesLines
2011-05-11cfg80211/nl80211: add support for scheduled scansLuciano Coelho1-0/+25
Implement new functionality for scheduled scan offload. With this feature we can scan automatically at certain intervals. The idea is that the hardware can perform scan automatically and filter on desired results without waking up the host unnecessarily. Add NL80211_CMD_START_SCHED_SCAN and NL80211_CMD_STOP_SCHED_SCAN commands to the nl80211 interface. When results are available they are reported by NL80211_CMD_SCHED_SCAN_RESULTS events. The userspace is informed when the scheduled scan has stopped with a NL80211_CMD_SCHED_SCAN_STOPPED event, which can be triggered either by the driver or by a call to NL80211_CMD_STOP_SCHED_SCAN. Signed-off-by: Luciano Coelho <coelho@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-11ssb: move ssb_commit_settings and export itRafał Miłecki1-0/+1
Commiting settings is possible on devices without PCI core (but with CC core). Export it for usage in drivers supporting other cores. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-11bcma: add missing GPIO defines, use PULL register only when availableRafał Miłecki1-0/+5
Similar patch was commited to ssb. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-11mac80211: Self-protected management frames are not robustThomas Pedersen1-0/+1
They may contain encrypted information elements (as AMPE frames do) but they are not encrypted. Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-11nl80211: Let userspace drive the peer link management states.Javier Cardona1-0/+4
Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-11cfg80211: Use capability info to detect mesh beacons.Javier Cardona1-0/+5
Mesh beacons no longer use all-zeroes BSSID. Beacon frames for MBSS, infrastructure BSS, or IBSS are differentiated by the Capability Information field in the Beacon frame. A mesh STA sets the ESS and IBSS subfields to 0 in transmitted Beacon or Probe Response management frames. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-11mac80211: Drop MESH_PLINK category and use new ANA-approved MESH_ACTIONJavier Cardona1-3/+2
Note: This breaks compatibility with previous mesh protocol instances. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-11nl80211: Introduce NL80211_MESH_SETUP_USERSPACE_AMPEJavier Cardona1-0/+10
Introduce a new configuration option to support AMPE from userspace. Prior to this series we only supported authentication in userspace: an authentication daemon would authenticate peer candidates in userspace and hand them over to the kernel. From that point the mesh stack would take over and establish a peer link (Mesh Peering Management). These patches introduce support for Authenticated Mesh Peering Exchange in userspace. The userspace daemon implements the AMPE protocol and on successfull completion create mesh peers and install encryption keys. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-11Merge branch 'tipc-May10-2011' of ↵David S. Miller1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/net-next-2.6
2011-05-11KVM: Fix off by one in kvm_for_each_vcpu iterationJeff Mahoney1-3/+4
This patch avoids gcc issuing the following warning when KVM_MAX_VCPUS=1: warning: array subscript is above array bounds kvm_for_each_vcpu currently checks to see if the index for the vcpu is valid /after/ loading it. We don't run into problems because the address is still inside the enclosing struct kvm and we never deference or write to it, so this isn't a security issue. The warning occurs when KVM_MAX_VCPUS=1 because the increment portion of the loop will *always* cause the loop to load an invalid location since ++idx will always be > 0. This patch moves the load so that the check occurs before the load and we don't run into the compiler warning. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11KVM: X86: Implement userspace interface to set virtual_tsc_khzJoerg Roedel1-0/+5
This patch implements two new vm-ioctls to get and set the virtual_tsc_khz if the machine supports tsc-scaling. Setting the tsc-frequency is only possible before userspace creates any vcpu. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11KVM: 16-byte mmio supportAvi Kivity1-1/+6
Since sse instructions can issue 16-byte mmios, we need to support them. We can't increase the kvm_run mmio buffer size to 16 bytes without breaking compatibility, so instead we break the large mmios into two smaller 8-byte ones. Since the bus is 64-bit we aren't breaking any atomicity guarantees. Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11Revert "KVM: Fix race between nmi injection and enabling nmi window"Marcelo Tosatti1-1/+0
This reverts commit f86368493ec038218e8663cc1b6e5393cd8e008a. Simpler fix to follow. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-05-11KVM: cleanup memslot_id functionXiao Guangrong1-1/+5
We can get memslot id from memslot->id directly Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11i2c: i2c-sh_mobile bus speed platform data V2Magnus Damm1-0/+10
Add support to the i2c-sh_mobile driver for setting the I2C bus speed using platform data. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-05-11x86/PCI: irq and pci_ids patch for Intel Panther Point DeviceIDsSeth Heasley1-0/+3
This patch adds the LPC Controller DeviceIDs for the Intel Panther Point PCH. Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-05-11net: Allow setting the network namespace by fdEric W. Biederman1-0/+1
Take advantage of the new abstraction and allow network devices to be placed in any network namespace that we have a fd to talk about. Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Daniel Lezcano <daniel.lezcano@free.fr> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2011-05-11ns proc: Add support for the ipc namespaceEric W. Biederman1-0/+1
Acked-by: Daniel Lezcano <daniel.lezcano@free.fr> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2011-05-11ns proc: Add support for the uts namespaceEric W. Biederman1-0/+1
Acked-by: Daniel Lezcano <daniel.lezcano@free.fr> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2011-05-11ns proc: Add support for the network namespace.Eric W. Biederman1-0/+1
Implementing file descriptors for the network namespace is simple and straight forward. Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Daniel Lezcano <daniel.lezcano@free.fr> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2011-05-11ns: proc files for namespace naming policy.Eric W. Biederman1-0/+18
Create files under /proc/<pid>/ns/ to allow controlling the namespaces of a process. This addresses three specific problems that can make namespaces hard to work with. - Namespaces require a dedicated process to pin them in memory. - It is not possible to use a namespace unless you are the child of the original creator. - Namespaces don't have names that userspace can use to talk about them. The namespace files under /proc/<pid>/ns/ can be opened and the file descriptor can be used to talk about a specific namespace, and to keep the specified namespace alive. A namespace can be kept alive by either holding the file descriptor open or bind mounting the file someplace else. aka: mount --bind /proc/self/ns/net /some/filesystem/path mount --bind /proc/self/fd/<N> /some/filesystem/path This allows namespaces to be named with userspace policy. It requires additional support to make use of these filedescriptors and that will be comming in the following patches. Acked-by: Daniel Lezcano <daniel.lezcano@free.fr> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2011-05-11usb: gadget: composite: Allow function drivers to pause control transfersRoger Quadros1-1/+15
Some USB function drivers (e.g. f_mass_storage.c) need to delay or defer the data/status stages of standard control requests like SET_CONFIGURATION or SET_INTERFACE till they are done with their bookkeeping and are actually ready for accepting new commands to their interface. They can now achieve this functionality by returning USB_GADGET_DELAYED_STATUS in their setup handlers (e.g. set_alt()). The composite framework will then defer completion of the control transfer by not completing the data/status stages. This ensures that the host does not send new packets to the interface till the function driver is ready to take them. When the function driver that requested for USB_GADGET_DELAYED_STATUS is done with its bookkeeping, it should signal the composite framework to continue with the data/status stages of the control transfer. It can do so by invoking the new API usb_composite_setup_continue(). This is where the control transfer's data/status stages are completed and host can initiate new transfers. The DELAYED_STATUS mechanism is currently only supported if the expected data phase is 0 bytes (i.e. w_length == 0). Since SET_CONFIGURATION and SET_INTERFACE are the only cases that will use this mechanism, this is not a limitation. Signed-off-by: Roger Quadros <roger.quadros@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-11firewire: sbp2: parallelize login, reconnect, logoutStefan Richter1-0/+2
The struct sbp2_logical_unit.work items can all be executed in parallel but are not reentrant. Furthermore, reconnect or re-login work must be executed in a WQ_MEM_RECLAIM workqueue. Hence replace the old single-threaded firewire-sbp2 workqueue by a concurrency-managed but non-reentrant workqueue with rescuer. firewire-core already maintains one, hence use this one. In earlier versions of this change, I observed occasional failures of parallel INQUIRY to an Initio INIC-2430 FireWire 800 to dual IDE bridge. More testing indicates that parallel INQUIRY is not actually a problem, but too quick successions of logout and login + INQUIRY, e.g. a quick sequence of cable plugout and plugin, can result in failed INQUIRY. This does not seem to be something that should or could be addressed by serialization. Another dual-LU device to which I currently have access to, an OXUF924DSB FireWire 800 to dual SATA bridge with firmware from MacPower, has been successfully tested with this too. This change is beneficial to environments with two or more FireWire storage devices, especially if they are located on the same bus. Management tasks that should be performed as soon and as quickly as possible, especially reconnect, are no longer held up by tasks on other devices that may take a long time, especially login with INQUIRY and sd or sr driver probe. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2011-05-11firewire: optimize iso queueing by setting wake only after the last packetClemens Ladisch1-0/+1
When queueing iso packets, the run time is dominated by the two MMIO accesses that set the DMA context's wake bit. Because most drivers submit packets in batches, we can save much time by removing all but the last wakeup. The internal kernel API is changed to require a call to fw_iso_context_queue_flush() after a batch of queued packets. The user space API does not change, so one call to FW_CDEV_IOC_QUEUE_ISO must specify multiple packets to take advantage of this optimization. In my measurements, this patch reduces the time needed to queue fifty skip packets from userspace to one sixth on a 2.5 GHz CPU, or to one third at 800 MHz. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2011-05-11firewire: octlet AT payloads can be stack-allocatedStefan Richter1-2/+1
We do not need slab allocations anymore in order to satisfy streaming DMA mapping constraints, thanks to commit da28947e7e36 "firewire: ohci: avoid separate DMA mapping for small AT payloads". (Besides, the slab-allocated buffers that firewire-core, firewire-sbp2, and firedtv used to provide for 8-byte write and lock requests were still not fully portable since they crossed cacheline boundaries or shared a cacheline with unrelated CPU-accessed data. snd-firewire-lib got this aspect right by using an extra kmalloc/ kfree just for the 8-byte transaction buffer.) This change replaces kmalloc'ed lock transaction scratch buffers in firewire-core, firedtv, and snd-firewire-lib by local stack allocations. Perhaps the most notable result of the change is simpler locking because there is no need to serialize usages of preallocated per-device buffers anymore. Also, allocations and deallocations are simpler. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Clemens Ladisch <clemens@ladisch.de>
2011-05-11Merge branch 2.6.39-rc7 into usb-linusGreg Kroah-Hartman23-40/+97
This was needed to resolve a conflict in: drivers/usb/host/isp1760-hcd.c Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-11tipc: Abort excessive send requests as early as possibleAllan Stephens1-1/+1
Adds checks to TIPC's socket send routines to promptly detect and abort attempts to send more than 66,000 bytes in a single TIPC message or more than 2**31-1 bytes in a single TIPC byte stream request. In addition, this ensures that the number of iovecs in a send request does not exceed the limits of a standard integer variable. Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-05-10bcma: add Broadcom specific AMBA bus driverRafał Miłecki5-0/+661
Broadcom has released cards based on a new AMBA-based bus type. From a programming point of view, this new bus type differs from AMBA and does not use AMBA common registers. It also differs enough from SSB. We decided that a new bus driver is needed to keep the code clean. In its current form, the driver detects devices present on the bus and registers them in the system. It allows registering BCMA drivers for specified bus devices and provides them basic operations. The bus driver itself includes two important bus managing drivers: ChipCommon core driver and PCI(c) core driver. They are early used to allow correct initialization. Currently code is limited to supporting buses on PCI(e) devices, however the driver is designed to be used also on other hosts. The host abstraction layer is implemented and already used for PCI(e). Support for PCI(e) hosts is working and seems to be stable (access to 80211 core was tested successfully on a few devices). We can still optimize it by using some fixed windows, but this can be done later without affecting any external code. Windows are just ranges in MMIO used for accessing cores on the bus. Cc: Greg KH <greg@kroah.com> Cc: Michael Büsch <mb@bu3sch.de> Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: George Kashperko <george@znau.edu.ua> Cc: Arend van Spriel <arend@broadcom.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Russell King <rmk@arm.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Andy Botting <andy@andybotting.com> Cc: linuxdriverproject <devel@linuxdriverproject.org> Cc: linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-10Merge commit 'v2.6.39-rc7' into perf/coreIngo Molnar16-14/+60
Merge reason: pull in the latest fixes. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-10nilfs2: add ioctl which limits range of segment to be allocatedRyusuke Konishi1-0/+2
This adds a new ioctl command which limits range of segment to be allocated. This is intended to gather data whithin a range of the partition before shrinking the filesystem, or to control new log location for some purpose. If a range is specified by the ioctl, segment allocator of nilfs tries to allocate new segments from the range unless no free segments are available there. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-05-10nilfs2: super root size should change depending on inode sizeRyusuke Konishi1-1/+1
The size of super root structure depends on inode size, so NILFS_SR_BYTES macro should be a function of the inode size. This fixes the issue. Even though a different size value will be written for a possible future filesystem with extended inode, but fortunately this does not break disk format compatibility. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-05-10Merge branches 'dma-debug/next', 'amd-iommu/command-cleanups', ↵Joerg Roedel1-0/+52
'amd-iommu/ats' and 'amd-iommu/extended-features' into iommu/2.6.40 Conflicts: arch/x86/include/asm/amd_iommu_types.h arch/x86/kernel/amd_iommu.c arch/x86/kernel/amd_iommu_init.c
2011-05-10treewide: fix a few typos in commentsJustin P. Mattock1-1/+1
- kenrel -> kernel - whetehr -> whether - ttt -> tt - sss -> ss Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-05-10Don't lock guardpage if the stack is growing upMikulas Patocka1-1/+23
Linux kernel excludes guard page when performing mlock on a VMA with down-growing stack. However, some architectures have up-growing stack and locking the guard page should be excluded in this case too. This patch fixes lvm2 on PA-RISC (and possibly other architectures with up-growing stack). lvm2 calculates number of used pages when locking and when unlocking and reports an internal error if the numbers mismatch. [ Patch changed fairly extensively to also fix /proc/<pid>/maps for the grows-up case, and to move things around a bit to clean it all up and share the infrstructure with the /proc bits. Tested on ia64 that has both grow-up and grow-down segments - Linus ] Signed-off-by: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Tested-by: Tony Luck <tony.luck@gmail.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-09net: add mac_pton() for parsing MAC addressAlexey Dobriyan1-0/+1
mac_pton() parses MAC address in form XX:XX:XX:XX:XX:XX and only in that form. mac_pton() doesn't dirty result until it's sure string representation is valid. mac_pton() doesn't care about characters _after_ last octet, it's up to caller to deal with it. mac_pton() diverges from 0/-E return value convention. Target usage: if (!mac_pton(str, whatever->mac)) return -EINVAL; /* ->mac being u8 [ETH_ALEN] is filled at this point. */ /* optionally check str[3 * ETH_ALEN - 1] for termination */ Use mac_pton() in pktgen and netconsole for start. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-09vlan: remove one synchronize_net() callEric Dumazet1-1/+0
At VLAN dismantle phase, unregister_vlan_dev() makes one synchronize_net() call after vlan_group_set_device(grp, vlan_id, NULL). This call can be safely removed because we are calling unregister_netdevice_queue() to queue device for deletion, and this process needs at least one rcu grace period to complete. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Ben Greear <greearb@candelatech.com> Cc: Patrick McHardy <kaber@trash.net> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Jesse Gross <jesse@nicira.com> Cc: Michał Mirosław <mirq-linux@rere.qmqm.pl> Acked-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-09mxm/wmi: add MXMX interface entry point.Dave Airlie1-0/+1
The MXMX method appears to be a mutex of some sort. Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-05-09ide: Use linux/mutex.hAnton Blanchard1-1/+1
The IDE code is still including asm/mutex.h instead of linux/mutex.h Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-09net: Allow ethtool to set interface in loopback mode.Mahesh Bandewar1-1/+2
This patch enables ethtool to set the loopback mode on a given interface. By configuring the interface in loopback mode in conjunction with a policy route / rule, a userland application can stress the egress / ingress path exposing the flows of the change in progress and potentially help developer(s) understand the impact of those changes without even sending a packet out on the network. Following set of commands illustrates one such example - a) ip -4 addr add 192.168.1.1/24 dev eth1 b) ip -4 rule add from all iif eth1 lookup 250 c) ip -4 route add local 0/0 dev lo proto kernel scope host table 250 d) arp -Ds 192.168.1.100 eth1 e) arp -Ds 192.168.1.200 eth1 f) sysctl -w net.ipv4.ip_nonlocal_bind=1 g) sysctl -w net.ipv4.conf.all.accept_local=1 # Assuming that the machine has 8 cores h) taskset 000f netserver -L 192.168.1.200 i) taskset 00f0 netperf -t TCP_CRR -L 192.168.1.100 -H 192.168.1.200 -l 30 Signed-off-by: Mahesh Bandewar <maheshb@google.com> Acked-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-09ethtool: Add 20G bit definitionsYaniv Rosner1-0/+4
Add 20G supported and advertising bit definitions. 20G will be supported with the 57840 chips. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> ------ include/linux/ethtool.h | 4 ++++ 1 files changed, 4 insertions(+), 0 deletions(-) Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-08ethtool: remove phys_id from ethtool_opsStephen Hemminger1-7/+0
After that all the upstream kernel drivers now use phys_id, and the old ethtool_ops interface (phys_id) can be removed. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-08Merge branch 'perf-fixes-for-linus' of ↵Linus Torvalds2-1/+15
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf tools: Makefile: Use gcc to determine ARCH perf events, x86: Fix Intel Nehalem and Westmere last level cache event definitions hw_breakpoints, powerpc: Fix CONFIG_HAVE_HW_BREAKPOINT off-case in ptrace_set_debugreg() sh, hw_breakpoints: Fix racy access to ptrace breakpoints arm, hw_breakpoints: Fix racy access to ptrace breakpoints powerpc, hw_breakpoints: Fix racy access to ptrace breakpoints x86, hw_breakpoints: Fix racy access to ptrace breakpoints ptrace: Prepare to fix racy accesses on task breakpoints
2011-05-07slub: Remove CONFIG_CMPXCHG_LOCAL ifdefferyChristoph Lameter1-2/+0
Remove the #ifdefs. This means that the irqsafe_cpu_cmpxchg_double() is used everywhere. There may be performance implications since: A. We now have to manage a transaction ID for all arches B. The interrupt holdoff for arches not supporting CONFIG_CMPXCHG_LOCAL is reduced to a very short irqoff section. There are no multiple irqoff/irqon sequences as a result of this change. Even in the fallback case we only have to do one disable and enable like before. Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Pekka Enberg <penberg@kernel.org>
2011-05-07block: Remove extra discard_alignment from hd_struct.Tao Ma1-1/+0
Currently, hd_struct.discard_alignment is only used when we show /sys/block/sdx/sdx/discard_alignment. So remove it and calculate when it is asked to show. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-07USB: OTG: msm: Add PHY suspend support for MSM8960Pavankumar Kondeti1-0/+2
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-07USB: OTG: msm: Implement charger detectionPavankumar Kondeti1-1/+71
Implement good battery algorithm defined in the battery charging V1.2 spec for detecting different charging ports. USB hardware is put into low power mode when connected to a dedicated charging port. vbus_draw and set_power methods are implemented for determining the allowed current from Host in different states (un-configured/suspend/configured). The charger block is implemented using vendor specific registers and the PHY used in MSM8960(28nm PHY) different from older targets like MSM8x60 and MSM7x30(45nm PHY). The PHY vendor and product id registers are not implemented in the above chipsets. Hence PHY type is passed via platform data. Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-07USB: OTG: msm: vote for dayatona fabric clockAnji jonnala1-2/+5
HSUSB core clock is derived from daytona fabric clock and for HSUSB operational require minimum core clock at 55MHz. Since, HSUSB cannot tolerate daytona fabric clock change in the middle of HSUSB operational, vote for maximum Daytona fabric clock while usb is operational Signed-off-by: Anji jonnala <anjir@codeaurora.org> Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-07usb: fix building musb driversAnatolij Gustschin1-1/+6
Commit 3dacdf11 "usb: factor out state_string() on otg drivers" broke building musb drivers since there is already another otg_state_string() function in musb drivers, but with different prototype. Fix musb drivers to use common otg_state_string(), too. Also provide a nop for otg_state_string() if CONFIG_USB_OTG_UTILS is not defined. Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-07driver core: Add the device driver-model structures to kerneldocWanlong Gao1-3/+151
Add the comments to the structure bus_type, device_driver, device, class to device.h for generating the driver-model kerneldoc. With another patch these all removed from the files in Documentation/driver-model/ since they are out of date. That will keep things up to date and provide a better way to document this stuff. Signed-off-by: Wanlong Gao <wanlong.gao@gmail.com> Acked-by: Harry Wei <harryxiyou@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-07Regression: partial revert "tracing: Remove lock_depth from event entry"Arjan van de Ven1-0/+1
This partially reverts commit e6e1e2593592a8f6f6380496655d8c6f67431266. That commit changed the structure layout of the trace structure, which in turn broke PowerTOP (1.9x generation) quite badly. I appreciate not wanting to expose the variable in question, and PowerTOP was not using it, so I've replaced the variable with just a padding field - that way if in the future a new field is needed it can just use this padding field. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-01-23 03:22:32 +0300