| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Cross-merge networking fixes after downstream PR (net-6.19-rc6).
No conflicts, or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for 6.20:
Core Changes:
- atomic: Introduce Gamma/Degamma LUT size check
- gem: Fix a leak in drm_gem_get_unmapped_area
- gpuvm: API sanitation for Rust bindings
- panic: Few corner-cases fixes
Driver Changes:
- Replace system workqueue with percpu equivalent
- amdxdna: Update message buffer allocation requirements, Update
firmware version check
- imagination: Add AM62P support
- ivpu: Implement warm boot flow
- rockchip: Get rid of atomic_check fixups, Add Rockchip RK3506 Support
- rocket: Cleanups
- bridge:
- dw-hdmi-qp: Add support for HPD-less setups
- panel:
- mantix: Various power management related improvements
- new panels: Innolux G150XGE-L05,
- dma-buf:
- cma: Call clear_page instead of memset
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patch.msgid.link/20260115-lilac-dragon-of-opposition-ac0a30@houat
|
|
Currently, the driver's device private data is allocated and initialized
from driver core code called from bus abstractions after the driver's
probe() callback returned the corresponding initializer.
Similarly, the driver's device private data is dropped within the
remove() callback of bus abstractions after calling the remove()
callback of the corresponding driver.
However, commit 6f61a2637abe ("rust: device: introduce
Device::drvdata()") introduced an accessor for the driver's device
private data for a Device<Bound>, i.e. a device that is currently bound
to a driver.
Obviously, this is in conflict with dropping the driver's device private
data in remove(), since a device can not be considered to be fully
unbound after remove() has finished:
We also have to consider registrations guarded by devres - such as IRQ
or class device registrations - which are torn down after remove() in
devres_release_all().
Thus, it can happen that, for instance, a class device or IRQ callback
still calls Device::drvdata(), which then runs concurrently to remove()
(which sets dev->driver_data to NULL and drops the driver's device
private data), before devres_release_all() started to tear down the
corresponding registration. This is because devres guarded registrations
can, as expected, access the corresponding Device<Bound> that defines
their scope.
In C it simply is the driver's responsibility to ensure that its device
private data is freed after e.g. an IRQ registration is unregistered.
Typically, C drivers achieve this by allocating their device private data
with e.g. devm_kzalloc() before doing anything else, i.e. before e.g.
registering an IRQ with devm_request_threaded_irq(), relying on the
reverse order cleanup of devres.
Technically, we could do something similar in Rust. However, the
resulting code would be pretty messy:
In Rust we have to differentiate between allocated but uninitialized
memory and initialized memory in the type system. Thus, we would need to
somehow keep track of whether the driver's device private data object
has been initialized (i.e. probe() was successful and returned a valid
initializer for this memory) and conditionally call the destructor of
the corresponding object when it is freed.
This is because we'd need to allocate and register the memory of the
driver's device private data *before* it is initialized by the
initializer returned by the driver's probe() callback, because the
driver could already register devres guarded registrations within
probe() outside of the driver's device private data initializer.
Luckily there is a much simpler solution: Instead of dropping the
driver's device private data at the end of remove(), we just drop it
after the device has been fully unbound, i.e. after all devres callbacks
have been processed.
For this, we introduce a new post_unbind() callback private to the
driver-core, i.e. the callback is neither exposed to drivers, nor to bus
abstractions.
This way, the driver-core code can simply continue to conditionally
allocate the memory for the driver's device private data when the
driver's initializer is returned from probe() - no change needed - and
drop it when the driver-core code receives the post_unbind() callback.
Closes: https://lore.kernel.org/all/DEZMS6Y4A7XE.XE7EUBT5SJFJ@kernel.org/
Fixes: 6f61a2637abe ("rust: device: introduce Device::drvdata()")
Acked-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Igor Korotin <igor.korotin.linux@gmail.com>
Link: https://patch.msgid.link/20260107103511.570525-7-dakr@kernel.org
[ Remove #ifdef CONFIG_RUST, rename post_unbind() to post_unbind_rust().
- Danilo]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Mahe reported issue with bpf_override_return helper not working when
executed from kprobe.multi bpf program on arm.
The problem is that on arm we use alternate storage for pt_regs object
that is passed to bpf_prog_run and if any register is changed (which
is the case of bpf_override_return) it's not propagated back to actual
pt_regs object.
Fixing this by introducing and calling ftrace_partial_regs_update function
to propagate the values of changed registers (ip and stack).
Reported-by: Mahe Tardy <mahe.tardy@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/bpf/20260112121157.854473-1-jolsa@kernel.org
|
|
Currently the post-populate callbacks handle copying source pages into
private GPA ranges backed by guest_memfd, where kvm_gmem_populate()
acquires the filemap invalidate lock, then calls a post-populate
callback which may issue a get_user_pages() on the source pages prior to
copying them into the private GPA (e.g. TDX).
This will not be compatible with in-place conversion, where the
userspace page fault path will attempt to acquire the filemap invalidate
lock while holding the mm->mmap_lock, leading to a potential ABBA
deadlock.
Address this by hoisting the GUP above the filemap invalidate lock so
that these page faults path can be taken early, prior to acquiring the
filemap invalidate lock.
It's not currently clear whether this issue is reachable with the
current implementation of guest_memfd, which doesn't support in-place
conversion, however it does provide a consistent mechanism to provide
stable source/target PFNs to callbacks rather than punting to
vendor-specific code, which allows for more commonality across
architectures, which may be worthwhile even without in-place conversion.
As part of this change, also begin enforcing that the 'src' argument to
kvm_gmem_populate() must be page-aligned, as this greatly reduces the
complexity around how the post-populate callbacks are implemented, and
since no current in-tree users support using a non-page-aligned 'src'
argument.
Suggested-by: Sean Christopherson <seanjc@google.com>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Co-developed-by: Vishal Annapurve <vannapurve@google.com>
Signed-off-by: Vishal Annapurve <vannapurve@google.com>
Tested-by: Vishal Annapurve <vannapurve@google.com>
Tested-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Tested-by: Yan Zhao <yan.y.zhao@intel.com>
Reviewed-by: Yan Zhao <yan.y.zhao@intel.com>
Link: https://patch.msgid.link/20260108214622.1084057-7-michael.roth@amd.com
[sean: avoid local "p" variable]
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
kvm_gmem_populate(), and the associated post-populate callbacks, have
some limited support for dealing with guests backed by hugepages by
passing the order information along to each post-populate callback and
iterating through the pages passed to kvm_gmem_populate() in
hugepage-chunks.
However, guest_memfd doesn't yet support hugepages, and in most cases
additional changes in the kvm_gmem_populate() path would also be needed
to actually allow for this functionality.
This makes the existing code unnecessarily complex, and makes changes
difficult to work through upstream due to theoretical impacts on
hugepage support that can't be considered properly without an actual
hugepage implementation to reference. So for now, remove what's there
so changes for things like in-place conversion can be
implemented/reviewed more efficiently.
Suggested-by: Vishal Annapurve <vannapurve@google.com>
Co-developed-by: Vishal Annapurve <vannapurve@google.com>
Signed-off-by: Vishal Annapurve <vannapurve@google.com>
Tested-by: Vishal Annapurve <vannapurve@google.com>
Tested-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Tested-by: Yan Zhao <yan.y.zhao@intel.com>
Reviewed-by: Yan Zhao <yan.y.zhao@intel.com>
Link: https://patch.msgid.link/20260108214622.1084057-3-michael.roth@amd.com
[sean: check for !IS_ERR() before checking folio_order()]
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Pull NFS client fixes from Trond Myklebust:
- Fix another deadlock involving nfs_release_folio()
- localio:
- Stop I/O upon hitting a fatal error
- Deal with page offsets that are > PAGE_SIZE
- Fix size read races in truncate, fallocate and copy offload
- Several bugfixes for the NFSv4.x directory delegation client code
- pNFS:
- Fix a deadlock when returning delegations during open
- Fix memory leaks in various error paths
* tag 'nfs-for-6.19-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFS: Fix size read races in truncate, fallocate and copy offload
NFS: Don't immediately return directory delegations when disabled
NFS/localio: Deal with page bases that are > PAGE_SIZE
NFS/localio: Stop further I/O upon hitting an error
NFSv4.x: Directory delegations don't require any state recovery
NFSv4: Don't free slots prematurely if requesting a directory delegation
NFSv4: Fix nfs_clear_verifier_delegated() for delegated directories
NFS: Fix directory delegation verifier checks
pnfs/blocklayout: Fix memory leak in bl_parse_scsi()
pnfs/flexfiles: Fix memory leak in nfs4_ff_alloc_deviceid_node()
NFS: Fix a deadlock involving nfs_release_folio()
pNFS: Fix a deadlock when returning a delegation during open()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
- kerneldoc fixes from Bagas Sanjaya
- DAMON fixes from SeongJae
- mremap VMA-related fixes from Lorenzo
- various singletons - please see the changelogs for details
* tag 'mm-hotfixes-stable-2026-01-15-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (30 commits)
drivers/dax: add some missing kerneldoc comment fields for struct dev_dax
mm: numa,memblock: include <asm/numa.h> for 'numa_nodes_parsed'
mailmap: add entry for Daniel Thompson
tools/testing/selftests: fix gup_longterm for unknown fs
mm/page_alloc: prevent pcp corruption with SMP=n
iommu/sva: include mmu_notifier.h header
mm: kmsan: fix poisoning of high-order non-compound pages
tools/testing/selftests: add forked (un)/faulted VMA merge tests
mm/vma: enforce VMA fork limit on unfaulted,faulted mremap merge too
tools/testing/selftests: add tests for !tgt, src mremap() merges
mm/vma: fix anon_vma UAF on mremap() faulted, unfaulted merge
mm/zswap: fix error pointer free in zswap_cpu_comp_prepare()
mm/damon/sysfs-scheme: cleanup access_pattern subdirs on scheme dir setup failure
mm/damon/sysfs-scheme: cleanup quotas subdirs on scheme dir setup failure
mm/damon/sysfs: cleanup attrs subdirs on context dir setup failure
mm/damon/sysfs: cleanup intervals subdirs on attrs dir setup failure
mm/damon/core: remove call_control in inactive contexts
powerpc/watchdog: add support for hardlockup_sys_info sysctl
mips: fix HIGHMEM initialization
mm/hugetlb: ignore hugepage kernel args if hugepages are unsupported
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bluetooth, can and IPsec.
Current release - regressions:
- net: add net.core.qdisc_max_burst
- can: propagate CAN device capabilities via ml_priv
Previous releases - regressions:
- dst: fix races in rt6_uncached_list_del() and
rt_del_uncached_list()
- ipv6: fix use-after-free in inet6_addr_del().
- xfrm: fix inner mode lookup in tunnel mode GSO segmentation
- ip_tunnel: spread netdev_lockdep_set_classes()
- ip6_tunnel: use skb_vlan_inet_prepare() in __ip6_tnl_rcv()
- bluetooth: hci_sync: enable PA sync lost event
- eth: virtio-net:
- fix the deadlock when disabling rx NAPI
- fix misalignment bug in struct virtnet_info
Previous releases - always broken:
- ipv4: ip_gre: make ipgre_header() robust
- can: fix SSP_SRC in cases when bit-rate is higher than 1 MBit.
- eth:
- mlx5e: profile change fix
- octeon_ep_vf: fix free_irq dev_id mismatch in IRQ rollback
- macvlan: fix possible UAF in macvlan_forward_source()"
* tag 'net-6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (37 commits)
virtio_net: Fix misalignment bug in struct virtnet_info
net: can: j1939: j1939_xtp_rx_rts_session_active(): deactivate session upon receiving the second rts
can: raw: instantly reject disabled CAN frames
can: propagate CAN device capabilities via ml_priv
Revert "can: raw: instantly reject unsupported CAN frames"
net/sched: sch_qfq: do not free existing class in qfq_change_class()
selftests: drv-net: fix RPS mask handling for high CPU numbers
selftests: drv-net: fix RPS mask handling in toeplitz test
ipv6: Fix use-after-free in inet6_addr_del().
dst: fix races in rt6_uncached_list_del() and rt_del_uncached_list()
net: hv_netvsc: reject RSS hash key programming without RX indirection table
tools: ynl: render event op docs correctly
net: add net.core.qdisc_max_burst
net: airoha: Fix typo in airoha_ppe_setup_tc_block_cb definition
net: phy: motorcomm: fix duplex setting error for phy leds
net: octeon_ep_vf: fix free_irq dev_id mismatch in IRQ rollback
net/mlx5e: Restore destroying state bit after profile cleanup
net/mlx5e: Pass netdev to mlx5e_destroy_netdev instead of priv
net/mlx5e: Don't store mlx5e_priv in mlx5e_dev devlink priv
net/mlx5e: Fix crash on profile change rollback failure
...
|
|
Replace XXX with what it actually means.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Fix the comment for blk_zone_cond_str() by replacing the meaningless
BLK_ZONE_ZONE_XXX comment with the correct BLK_ZONE_COND_name, thus also
replacing the XXX with what that actually means.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into gpio/for-next
Immutable branch between MFD, Clk, GPIO, Power, Regulator and RTC due for the v6.20 merge window
|
|
for_each_of_imap_item is an iterator designed to help a driver to parse
an interrupt-map property.
Indeed some drivers need to know details about the interrupt mapping
described in the device-tree in order to set internal registers
accordingly.
Signed-off-by: Herve Codina (Schneider Electric) <herve.codina@bootlin.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patch.msgid.link/20260114093938.1089936-2-herve.codina@bootlin.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Commit 1a620a723853 ("can: raw: instantly reject unsupported CAN frames")
caused a sequence of dependency and linker fixes.
Instead of accessing CAN device internal data structures which caused the
dependency problems this patch introduces capability information into the
CAN specific ml_priv data which is accessible from both sides.
With this change the CAN network layer can check the required features and
the decoupling of the driver layer and network layer is restored.
Fixes: 1a620a723853 ("can: raw: instantly reject unsupported CAN frames")
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Vincent Mailhol <mailhol@kernel.org>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260109144135.8495-3-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
This reverts commit 1a620a723853a0f49703c317d52dc6b9602cbaa8
and its follow-up fixes for the introduced dependency issues.
commit 1a620a723853 ("can: raw: instantly reject unsupported CAN frames")
commit cb2dc6d2869a ("can: Kconfig: select CAN driver infrastructure by default")
commit 6abd4577bccc ("can: fix build dependency")
commit 5a5aff6338c0 ("can: fix build dependency")
The entire problem was caused by the requirement that a new network layer
feature needed to know about the protocol capabilities of the CAN devices.
Instead of accessing CAN device internal data structures which caused the
dependency problems a better approach has been developed which makes use of
CAN specific ml_priv data which is accessible from both sides.
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Vincent Mailhol <mailhol@kernel.org>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260109144135.8495-2-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Commit a9af76a78760 ("watchdog: add sys_info sysctls to dump sys info on
system lockup") adds 'hardlock_sys_info' systcl knob for general kernel
watchdog to control what kinds of system debug info to be dumped on
hardlockup.
Add similar support in powerpc watchdog code to make the sysctl knob more
general, which also fixes a compiling warning in general watchdog code
reported by 0day bot.
Link: https://lkml.kernel.org/r/20251231080309.39642-1-feng.tang@linux.alibaba.com
Fixes: a9af76a78760 ("watchdog: add sys_info sysctls to dump sys info on system lockup")
Signed-off-by: Feng Tang <feng.tang@linux.alibaba.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202512030920.NFKtekA7-lkp@intel.com/
Suggested-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Sphinx reports kernel-doc warning:
WARNING: ./include/linux/kfence.h:220 function parameter 'slab' not described in '__kfence_obj_info'
Fix it by describing @slab parameter.
Link: https://lkml.kernel.org/r/20251219014006.16328-6-bagasdotme@gmail.com
Fixes: 2dfe63e61cc3 ("mm, kfence: support kmem_dump_obj() for KFENCE objects")
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Acked-by: Marco Elver <elver@google.com>
Acked-by: David Hildenbrand (Red Hat) <david@kernel.org>
Acked-by: Harry Yoo <harry.yoo@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Sphinx reports kernel-doc warning:
WARNING: ./include/linux/textsearch.h:49 struct member 'list' not described in 'ts_ops'
Describe @list member to fix it.
Link: https://lkml.kernel.org/r/20251219014006.16328-4-bagasdotme@gmail.com
Fixes: 2de4ff7bd658 ("[LIB]: Textsearch infrastructure.")
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Cc: Thomas Graf <tgraf@suug.ch>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm kernel-doc fixes".
Here are kernel-doc fixes for mm subsystem. I'm also including textsearch
fix since there's currently no maintainer for include/linux/textsearch.h
(get_maintainer.pl only shows LKML).
This patch (of 4):
Sphinx reports kernel-doc warning:
WARNING: ./include/linux/sched/mm.h:332 function parameter 'flags' not described in 'memalloc_flags_save'
Describe @flags to fix it.
Link: https://lkml.kernel.org/r/20251219014006.16328-2-bagasdotme@gmail.com
Link: https://lkml.kernel.org/r/20251219014006.16328-3-bagasdotme@gmail.com
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Fixes: 3f6d5e6a468d ("mm: introduce memalloc_flags_{save,restore}")
Acked-by: David Hildenbrand (Red Hat) <david@kernel.org>
Acked-by: Harry Yoo <harry.yoo@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
A previous commit improving IOPOLL made an incorrect assumption that
task_work isn't used with IOPOLL. This can cause crashes when doing
passthrough I/O on nvme, where queueing the completion task_work will
trample on the same memory that holds the completed list of requests.
Fix it up by shuffling the members around, so we're not sharing any
parts that end up getting used in this path.
Fixes: 3c7d76d6128a ("io_uring: IOPOLL polling improvements")
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Link: https://lore.kernel.org/linux-block/CAHj4cs_SLPj9v9w5MgfzHKy+983enPx3ZQY2kMuMJ1202DBefw@mail.gmail.com/
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Cc: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
FIELD_GET() and FIELD_PREP() are mainly useful for hardware register
accesses, but here they are being used for some very simple oprations.
This wouldn't matter much, but they contain a lot of compile-time
checks (that really aren't needed here) that bloat the expansion
of FIELD_GET(GENMASK(7, 1), func) to over 18KB.
Even with the 'bloat reduced' FIELD_GET/PREP they are still hundreds of
characters.
Replace FIELD_GET(BIT(0), r) with ((r) & 1), FIELD_GET(GENMASK(7, 1), r) with
(r) >> 1), and (FIELD_PREP(BIT(0), write) | FIELD_PREP(GENMASK(7, 1), func))
with ((func) << 1 | (write)).
The generated code is the same, but it makes the .c file less obfuctaced,
the .i file much easier to read, and should marginally decrease compilation
time.
Signed-off-by: David Laight <david.laight.linux@gmail.com>
Link: https://patch.msgid.link/20251214125857.3308-1-david.laight.linux@gmail.com
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Cross-merge BPF and other fixes after downstream PR.
No conflicts.
Adjacent:
Auto-merging MAINTAINERS
Auto-merging Makefile
Auto-merging kernel/bpf/verifier.c
Auto-merging kernel/sched/ext.c
Auto-merging mm/memcontrol.c
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add the __counted_by() compiler attribute to the flexible array member
'value' to improve access bounds-checking via CONFIG_UBSAN_BOUNDS and
CONFIG_FORTIFY_SOURCE.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20260105122057.2347-2-thorsten.blum@linux.dev
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
As done for kmalloc_obj*(), introduce a type-aware allocator for flexible
arrays, which may also have "counted_by" annotations:
ptr = kmalloc(struct_size(ptr, flex_member, count), gfp);
becomes:
ptr = kmalloc_flex(*ptr, flex_member, count, gfp);
The internal use of __flex_counter() allows for automatically setting
the counter member of a struct's flexible array member when it has
been annotated with __counted_by(), avoiding any missed early size
initializations while __counted_by() annotations are added to the
kernel. Additionally, this also checks for "too large" allocations based
on the type size of the counter variable. For example:
if (count > type_max(ptr->flex_counter))
fail...;
size = struct_size(ptr, flex_member, count);
ptr = kmalloc(size, gfp);
if (!ptr)
fail...;
ptr->flex_counter = count;
becomes (n.b. unchanged from earlier example):
ptr = kmalloc_flex(*ptr, flex_member, count, gfp);
if (!ptr)
fail...;
ptr->flex_counter = count;
Note that manual initialization of the flexible array counter is still
required (at some point) after allocation as not all compiler versions
support the __counted_by annotation yet. But doing it internally makes
sure they cannot be missed when __counted_by _is_ available, meaning
that the bounds checker will not trip due to the lack of "early enough"
initializations that used to work before enabling the stricter bounds
checking. For example:
ptr = kmalloc_flex(*ptr, flex_member, count, gfp);
fill(ptr->flex, count);
ptr->flex_count = count;
This works correctly before adding a __counted_by annotation (since
nothing is checking ptr->flex accesses against ptr->flex_count). After
adding the annotation, the bounds sanitizer would trip during fill()
because ptr->flex_count wasn't set yet. But with kmalloc_flex() setting
ptr->flex_count internally at allocation time, the existing code works
without needing to move the ptr->flex_count assignment before the call
to fill(). (This has been a stumbling block for __counted_by adoption.)
Link: https://patch.msgid.link/20251203233036.3212363-4-kees@kernel.org
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Introduce __flex_counter() which wraps __builtin_counted_by_ref(),
as newly introduced by GCC[1] and Clang[2]. Use of __flex_counter()
allows access to the counter member of a struct's flexible array member
when it has been annotated with __counted_by().
Introduce typeof_flex_counter(), overflows_flex_counter_type(), and
__set_flex_counter() to provide the needed _Generic() wrappers to get
sane results out of __flex_counter().
For example, with:
struct foo {
int counter;
short array[] __counted_by(counter);
} *p;
__flex_counter(p->array) will resolve to: &p->counter
typeof_flex_counter(p->array) will resolve to "int". (If p->array was not
annotated, it would resolve to "size_t".)
overflows_flex_counter_type(typeof(*p), array, COUNT) is the same as:
COUNT <= type_max(p->counter) && COUNT >= type_min(p->counter)
(If p->array was not annotated it would return true since everything
fits in size_t.)
__set_flex_counter(p->array, COUNT) is the same as:
p->counter = COUNT;
(It is a no-op if p->array is not annotated with __counted_by().)
Link: https://patch.msgid.link/20251203233036.3212363-3-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Introduce type-aware kmalloc-family helpers to replace the common
idioms for single object and arrays of objects allocation:
ptr = kmalloc(sizeof(*ptr), gfp);
ptr = kmalloc(sizeof(struct some_obj_name), gfp);
ptr = kzalloc(sizeof(*ptr), gfp);
ptr = kmalloc_array(count, sizeof(*ptr), gfp);
ptr = kcalloc(count, sizeof(*ptr), gfp);
These become, respectively:
ptr = kmalloc_obj(*ptr, gfp);
ptr = kmalloc_obj(*ptr, gfp);
ptr = kzalloc_obj(*ptr, gfp);
ptr = kmalloc_objs(*ptr, count, gfp);
ptr = kzalloc_objs(*ptr, count, gfp);
Beyond the other benefits outlined below, the primary ergonomic benefit
is the elimination of needing "sizeof" nor the type name, and the
enforcement of assignment types (they do not return "void *", but rather
a pointer to the type of the first argument). The type name _can_ be
used, though, in the case where an assignment is indirect (e.g. via
"return"). This additionally allows[1] variables to be declared via
__auto_type:
__auto_type ptr = kmalloc_obj(struct foo, gfp);
Internal introspection of the allocated type now becomes possible,
allowing for future alignment-aware choices to be made by the allocator
and future hardening work that can be type sensitive. For example,
adding __alignof(*ptr) as an argument to the internal allocators so that
appropriate/efficient alignment choices can be made, or being able to
correctly choose per-allocation offset randomization within a bucket
that does not break alignment requirements.
Link: https://lore.kernel.org/all/CAHk-=wiCOTW5UftUrAnvJkr6769D29tF7Of79gUjdQHS_TkF5A@mail.gmail.com/ [1]
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Link: https://patch.msgid.link/20251203233036.3212363-1-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
The header has a function which calls pr_err(). Don't require users of
the header to include <linux/printk.h> and include it here.
Fixes: 87cfc79dcd60 ("drm/msm/a6xx: Resolve the meaning of UBWC_MODE")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20260110-iris-ubwc-v1-1-dd70494dcd7b@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Merge series from Sascha Hauer <s.hauer@pengutronix.de>:
These are some patches for the tlv320adcx140 codec we are carrying
around for a while, time to upstream them.
|
|
Master drivers currently manage Runtime PM individually, but all require
runtime resume for bus operations. This can be centralized in common code.
Add optional Runtime PM support to ensure the parent device is runtime
resumed before bus operations and auto-suspended afterward.
Notably, do not call ->bus_cleanup() if runtime resume fails. Master
drivers that opt-in to core runtime PM support must take that into account.
Also provide an option to allow IBIs and hot-joins while runtime suspended.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260113072702.16268-20-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
For many years btrfs as been using a copy of may_create() in
fs/btrfs/ioctl.c:btrfs_may_create(). Everytime may_create() is updated we
need to update the btrfs copy, and this is a maintenance burden. Currently
there are minor differences between both because the btrfs side lacks
updates done in may_create().
Export may_create() so that btrfs can use it and with the less generic
name may_create_dentry().
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Link: https://patch.msgid.link/ce5174bca079f4cdcbb8dd145f0924feb1f227cd.1768307858.git.fdmanana@suse.com
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
For many years btrfs as been using a copy of may_delete() in
fs/btrfs/ioctl.c:btrfs_may_delete(). Everytime may_delete() is updated we
need to update the btrfs copy, and this is a maintenance burden. Currently
there are minor differences between both because the btrfs side lacks
updates done in may_delete().
Export may_delete() so that btrfs can use it and with the less generic
name may_delete_dentry(). While at it change the calls in vfs_rmdir() to
pass a boolean literal instead of 1 and 0 as the last argument since the
argument has a bool type.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Link: https://patch.msgid.link/e09128fd53f01b19d0a58f0e7d24739f79f47f6d.1768307858.git.fdmanana@suse.com
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
There's a logic inside GHES/CPER to detect if the section_length
is too small, but it doesn't detect if it is too big.
Currently, if the firmware receives an ARM processor CPER record
stating that a section length is big, kernel will blindly trust
section_length, producing a very long dump. For instance, a 67
bytes record with ERR_INFO_NUM set 46198 and section length
set to 854918320 would dump a lot of data going a way past the
firmware memory-mapped area.
Fix it by adding a logic to prevent it to go past the buffer
if ERR_INFO_NUM is too big, making it report instead:
[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 1
[Hardware Error]: event severity: recoverable
[Hardware Error]: Error 0, type: recoverable
[Hardware Error]: section_type: ARM processor error
[Hardware Error]: MIDR: 0xff304b2f8476870a
[Hardware Error]: section length: 854918320, CPER size: 67
[Hardware Error]: section length is too big
[Hardware Error]: firmware-generated error record is incorrect
[Hardware Error]: ERR_INFO_NUM is 46198
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
[ rjw: Subject and changelog tweaks ]
Link: https://patch.msgid.link/41cd9f6b3ace3cdff7a5e864890849e4b1c58b63.1767871950.git.mchehab+huawei@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Write down the missing members definitions for struct export_operations,
using as a reference the commit messages that created the members.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Link: https://patch.msgid.link/20260112-tonyk-fs_uuid-v1-3-acc1889de772@igalia.com
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Adding a `@` before the function names make then recognizable as
kernel-docs, so they get correctly rendered in the documentation.
Even if they are already marked with `@` in the short one-line summary,
the kernel-docs will correctly favor the more detailed definition here.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Link: https://patch.msgid.link/20260112-tonyk-fs_uuid-v1-2-acc1889de772@igalia.com
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Without a space between %NAME_MAX and the plus sign, kernel-doc will
output ``NAME_MAX``+1, which scapes the last backtick and make Sphinx
format a much larger string as monospaced text.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Link: https://patch.msgid.link/20260112-tonyk-fs_uuid-v1-1-acc1889de772@igalia.com
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
commit 4ef4ac360101 ("device_cgroup: avoid access to ->i_rdev in the
common case in devcgroup_inode_permission()") reordered the checks in
devcgroup_inode_permission() to check the inode mode before checking
i_rdev, for better cache behavior.
However, the likely() annotation on the i_rdev check was not updated
to reflect the new code flow. Originally, when i_rdev was checked
first, likely(!inode->i_rdev) made sense because most inodes were(?)
regular files/directories, thus i_rdev == 0.
After the reorder, by the time we reach the i_rdev check, we have
already confirmed the inode IS a block or character device. Block and
character special files are precisely defined by having a device number
(i_rdev), so !inode->i_rdev is now the rare edge case, not the common
case.
Branch profiling confirmed this is 100% mispredicted:
correct incorrect % Function File Line
------- --------- - -------- ---- ----
0 2631904 100 devcgroup_inode_permission device_cgroup.h 24
Remove likely() to avoid giving the wrong hint to the CPU.
Fixes: 4ef4ac360101 ("device_cgroup: avoid access to ->i_rdev in the common case in devcgroup_inode_permission()")
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260107-likely_device-v1-1-0c55f83a7e47@debian.org
Reviewed-by: Mateusz Guzik <mjguzik@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
It's useful to get filesystem-specific information using the
existing private field in the @iomap_iter passed to iomap_{begin,end}
for advanced usage for iomap buffered reads, which is much like the
current iomap DIO.
For example, EROFS needs it to:
- implement an efficient page cache sharing feature, since iomap
needs to apply to anon inode page cache but we'd like to get the
backing inode/fs instead, so filesystem-specific private data is
needed to keep such information;
- pass in both struct page * and void * for inline data to avoid
kmap_to_page() usage (which is bogus).
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Link: https://patch.msgid.link/20260109102856.598531-2-lihongbo22@huawei.com
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
It turns out that warning about which USB host controller is loaded
before another one doesn't really matter. All that really is needed is
the PCI softdep module loading logic, which has been present in the
kernel ever since commit 05c92da0c524 ("usb: ohci/uhci - add soft
dependencies on ehci_pci")
So remove the warning messages, they are not useful, not needed, and
only confuse people. As can be seen in the discussion at
https://lore.kernel.org/r/20251230080014.3934590-1-chenhuacai@loongson.cn
Cc: Huacai Chen <chenhuacai@loongson.cn>
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://patch.msgid.link/2026010739-diffuser-shelter-e31c@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add support for MIPI I3C Host Controllers with the Multi-Bus Instance
capability. These controllers can host multiple I3C buses (up to 15)
within a single hardware function (e.g., PCIe B/D/F), providing one
indepedent HCI register set and corresponding I3C bus controller logic
per bus.
A separate platform device will represent each instance, but it is
necessary to allow for shared resources.
Multi-bus instances share the same MMIO address space, but the ranges are
not guaranteed to be contiguous. To avoid overlapping mappings, pass
base_regs from the parent mapping to child devices.
Allow the IRQ to be shared among instances.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260106164416.67074-8-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
When I3C is disabled, unused functions are removed by the linker because
the driver relies on regmap and no I3C devices are registered, so normal
I3C paths are never called.
However, some drivers may still call low-level I3C transfer helpers.
Provide stub implementations to avoid adding conditional ifdefs everywhere.
Add stubs for i3c_device_do_xfers() and
i3c_device_get_supported_xfer_mode() only. Other stubs will be introduced
when they are actually needed.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202512230418.nu3V6Yua-lkp@intel.com/
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20251230145718.4088694-1-Frank.Li@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Drop i3c_priv_xfer and i3c_device_do_priv_xfers() after all driver switch
to use new API.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20251215172405.2982801-1-Frank.Li@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Add an extended feature flag NL80211_EXT_FEATURE_EPPKE to allow a
driver to indicate support for the Enhanced Privacy Protection Key
Exchange (EPPKE) authentication protocol in non-AP STA mode, as
defined in "IEEE P802.11bi/D3.0, 12.16.9".
In case of SME in userspace, the Authentication frame body is prepared
in userspace while the driver finalizes the Authentication frame once
it receives the required fields and elements. The driver indicates
support for EPPKE using the extended feature flag so that userspace
can initiate EPPKE authentication.
When the feature flag is set, process EPPKE Authentication frames from
userspace in non-AP STA mode. If the flag is not set, reject EPPKE
Authentication frames.
Define a new authentication type NL80211_AUTHTYPE_EPPKE for EPPKE.
Signed-off-by: Ainy Kumari <ainy.kumari@oss.qualcomm.com>
Co-developed-by: Kavita Kavita <kavita.kavita@oss.qualcomm.com>
Signed-off-by: Kavita Kavita <kavita.kavita@oss.qualcomm.com>
Link: https://patch.msgid.link/20260114111900.2196941-2-kavita.kavita@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
phy common properties
Vladimir Oltean <vladimir.oltean@nxp.com> wrote:
Introduce "rx-polarity" and "tx-polarity" device tree properties with
Kunit tests
|
|
Add helpers in the generic PHY folder which can be used using 'select
PHY_COMMON_PROPS' from Kconfig, without otherwise needing to
enable GENERIC_PHY.
These helpers need to deal with the slight messiness of the fact that
the polarity properties are arrays per protocol, and with the fact that
there is no default value mandated by the standard properties, all
default values depend on driver and protocol (PHY_POL_NORMAL may be a
good default for SGMII, whereas PHY_POL_AUTO may be a good default for
PCIe).
Push the supported mask of polarities to these helpers, to simplify
drivers such that they don't need to validate what's in the device tree
(or other firmware description).
Add a KUnit test suite to make sure that the API produces the expected
results. The fact that we use fwnode structures means we can validate
with software nodes, and as opposed to the device_property API, we can
bypass the need to have a device structure.
Co-developed-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20260111093940.975359-6-vladimir.oltean@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-linus
Jonathan writes:
IIO: 1st set of fixes for the 6.19 cycle
The usual mixed bag of fixes for ancient problems plus some more
recent ones.
adi,ad7280a
- Check for errors from spi_setup().
adi,ad3552r
- Fix potential buffer overflow when setting to use the internal ramp.
adi,ax5695r
- Fill in the data for this device in the chip info table.
adi,ad7606
- Don't store a negative error in an unsigned int.
adi,ad9467
- Fix incorrect register mask value.
adi,adxl380
- Fix inverted condition for whether INT1 interrupt present in dt.
atmel,at91-sama5d2
- Cancel work on remove to avoid a potential use-after-free
invensense,icm45600
- Fix temperature scaling.
samsung,eynos_adc
- Use of_platform_depolulate() to correctly clear up such that child
devices are created correctly if the driver is rebound.
sensiron,scd4x
- Fix incorrect endianness reported to user-space.
st,accel
- Fix gain reported for the iis329dq.
st,lsm6dsx
- Hide event related interfaces on parts that don't support events.
ti,pac1934
- Ensure output of clamp() is used rather than unclamped value.
* tag 'iio-fixes-for-6.19a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
iio: dac: ad3552r-hs: fix out-of-bound write in ad3552r_hs_write_data_source
iio: accel: iis328dq: fix gain values
iio: core: add separate lockdep class for info_exist_lock
iio: chemical: scd4x: fix reported channel endianness
iio: imu: inv_icm45600: fix temperature offset reporting
iio: adc: exynos_adc: fix OF populate on driver rebind
iio: dac: ad5686: add AD5695R to ad5686_chip_info_tbl
iio: accel: adxl380: fix handling of unavailable "INT1" interrupt
iio: imu: st_lsm6dsx: fix iio_chan_spec for sensors without event detection
iio: adc: pac1934: Fix clamped value in pac1934_reg_snapshot
iio: adc: ad9467: fix ad9434 vref mask
iio: adc: ad7606: Fix incorrect type for error return variable
iio: adc: ad7280a: handle spi_setup() errors in probe()
iio: adc: at91-sama5d2_adc: Fix potential use-after-free in sama5d2_adc driver
|
|
Add a generic TEE revision sysfs attribute backed by a new
optional get_tee_revision() callback. The revision string is
diagnostic-only and must not be used to infer feature support.
Signed-off-by: Aristo Chen <aristo.chen@canonical.com>
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
The last user of defined structures s3c_hwmon_pdata and s3c_hwmon_chcfg
was removed in commit 0d297df03890 ("ARM: s3c: simplify platform code"),
thus the platform data header file itself can be removed also.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Link: https://patch.msgid.link/20260112211554.3755188-1-vz@mleia.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
When a non-NCQ command is issued while NCQ commands are being executed,
ata_scsi_qc_issue() indicates to the SCSI layer that the command issuing
should be deferred by returning SCSI_MLQUEUE_XXX_BUSY. This command
deferring is correct and as mandated by the ACS specifications since
NCQ and non-NCQ commands cannot be mixed.
However, in the case of a host adapter using multiple submission queues,
when the target device is under a constant load of NCQ commands, there
are no guarantees that requeueing the non-NCQ command will be executed
later and it may be deferred again repeatedly as other submission queues
can constantly issue NCQ commands from different CPUs ahead of the
non-NCQ command. This can lead to very long delays for the execution of
non-NCQ commands, and even complete starvation for these commands in the
worst case scenario.
Since the block layer and the SCSI layer do not distinguish between
queueable (NCQ) and non queueable (non-NCQ) commands, libata-scsi SAT
implementation must ensure forward progress for non-NCQ commands in the
presence of NCQ command traffic. This is similar to what SAS HBAs with a
hardware/firmware based SAT implementation do.
Implement such forward progress guarantee by limiting requeueing of
non-NCQ commands from ata_scsi_qc_issue(): when a non-NCQ command is
received and NCQ commands are in-flight, do not force a requeue of the
non-NCQ command by returning SCSI_MLQUEUE_XXX_BUSY and instead return 0
to indicate that the command was accepted but hold on to the qc using
the new deferred_qc field of struct ata_port.
This deferred qc will be issued using the work item deferred_qc_work
running the function ata_scsi_deferred_qc_work() once all in-flight
commands complete, which is checked with the port qc_defer() callback
return value indicating that no further delay is necessary. This check
is done using the helper function ata_scsi_schedule_deferred_qc() which
is called from ata_scsi_qc_complete(). This thus excludes this mechanism
from all internal non-NCQ commands issued by ATA EH.
When a port deferred_qc is non NULL, that is, the port has a command
waiting for the device queue to drain, the issuing of all incoming
commands (both NCQ and non-NCQ) is deferred using the regular busy
mechanism. This simplifies the code and also avoids potential denial of
service problems if a user issues too many non-NCQ commands.
Finally, whenever ata EH is scheduled, regardless of the reason, a
deferred qc is always requeued so that it can be retried once EH
completes. This is done by calling the function
ata_scsi_requeue_deferred_qc() from ata_eh_set_pending(). This avoids
the need for any special processing for the deferred qc in case of NCQ
error, link or device reset, or device timeout.
Reported-by: Xingui Yang <yangxingui@huawei.com>
Reported-by: Igor Pylypiv <ipylypiv@google.com>
Fixes: bdb01301f3ea ("scsi: Add host and host template flag 'host_tagset'")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Tested-by: Igor Pylypiv <ipylypiv@google.com>
Tested-by: Xingui Yang <yangxingui@huawei.com>
|
|
It would be useful to be able to check for potential DMA pages beyond
just ZONE_DMA - generalise the existing has_managed_dma() function to
allow checking other zones too.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: David Hildenbrand (Red Hat) <david@kernel.org>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Tested-by: Vladimir Kondratiev <vladimir.kondratiev@mobileye.com>
Reviewed-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/bd002d2351074e57be1ca08f03f333debac658fb.1768230104.git.robin.murphy@arm.com
|
|
The cache parameter of getcpu() is useless nowadays for various reasons.
* It is never passed by userspace for either the vDSO or syscalls.
* It is never used by the kernel.
* It could not be made to work on the current vDSO architecture.
* The structure definition is not part of the UAPI headers.
* vdso_getcpu() is superseded by restartable sequences in any case.
Remove the struct and its header.
As a side-effect this gets rid of an unwanted inclusion of the linux/
header namespace from vDSO code.
[ tglx: Adapt to s390 upstream changes */
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Heiko Carstens <hca@linux.ibm.com> # s390
Link: https://patch.msgid.link/20251230-getcpu_cache-v3-1-fb9c5f880ebe@linutronix.de
|
