summaryrefslogtreecommitdiff
path: root/include/linux/writeback.h
AgeCommit message (Collapse)AuthorFilesLines
2017-03-23block: Fix oops in locked_inode_to_wb_and_lock_list()Jan Kara1-0/+1
When block device is closed, we call inode_detach_wb() in __blkdev_put() which sets inode->i_wb to NULL. That is contrary to expectations that inode->i_wb stays valid once set during the whole inode's lifetime and leads to oops in wb_get() in locked_inode_to_wb_and_lock_list() because inode_to_wb() returned NULL. The reason why we called inode_detach_wb() is not valid anymore though. BDI is guaranteed to stay along until we call bdi_put() from bdev_evict_inode() so we can postpone calling inode_detach_wb() to that moment. Also add a warning to catch if someone uses inode_detach_wb() in a dangerous way. Reported-by: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-25mm: vmscan: kick flushers when we encounter dirty pages on the LRUJohannes Weiner1-1/+1
Memory pressure can put dirty pages at the end of the LRU without anybody running into dirty limits. Don't start writing individual pages from kswapd while the flushers might be asleep. Unlike the old direct reclaim flusher wakeup (removed in the next patch) that flushes the number of pages just scanned, this patch wakes the flushers for all outstanding dirty pages. That seemed to perform better in a synthetic test that pushes dirty pages to the end of the LRU and into reclaim, because we know LRU aging outstrips writeback already, and this way we give younger dirty pages a headstart rather than wait until reclaim runs into them as well. It also means less plugging and risk of exhausting the struct request pool from reclaim. There is a concern that this will cause temporary files that used to get dirtied and truncated before writeback to now get written to disk under memory pressure. If this turns out to be a real problem, we'll have to revisit this and tame the reclaim flusher wakeups. [hannes@cmpxchg.org: mention dirty expiration as a condition] Link: http://lkml.kernel.org/r/20170126174739.GA30636@cmpxchg.org Link: http://lkml.kernel.org/r/20170123181641.23938-3-hannes@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Minchan Kim <minchan@kernel.org> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-25mm: add PageWaiters indicating tasks are waiting for a page bitNicholas Piggin1-1/+0
Add a new page flag, PageWaiters, to indicate the page waitqueue has tasks waiting. This can be tested rather than testing waitqueue_active which requires another cacheline load. This bit is always set when the page has tasks on page_waitqueue(page), and is set and cleared under the waitqueue lock. It may be set when there are no tasks on the waitqueue, which will cause a harmless extra wakeup check that will clears the bit. The generic bit-waitqueue infrastructure is no longer used for pages. Instead, waitqueues are used directly with a custom key type. The generic code was not flexible enough to have PageWaiters manipulation under the waitqueue lock (which simplifies concurrency). This improves the performance of page lock intensive microbenchmarks by 2-3%. Putting two bits in the same word opens the opportunity to remove the memory barrier between clearing the lock bit and testing the waiters bit, after some work on the arch primitives (e.g., ensuring memory operand widths match and cover both bits). Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Bob Peterson <rpeterso@redhat.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Andrew Lutomirski <luto@kernel.org> Cc: Andreas Gruenbacher <agruenba@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-11-02writeback: mark background writeback as suchJens Axboe1-0/+2
If we're doing background type writes, then use the appropriate background write flags for that. Signed-off-by: Jens Axboe <axboe@fb.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2016-11-02writeback: add wbc_to_write_flags()Jens Axboe1-0/+9
Add wbc_to_write_flags(), which returns the write modifier flags to use, based on a struct writeback_control. No functional changes in this patch, but it prepares us for factoring other wbc fields for write type. Signed-off-by: Jens Axboe <axboe@fb.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Christoph Hellwig <hch@lst.de>
2016-11-01block,fs: untangle fs.h and blk_types.hChristoph Hellwig1-0/+2
Nothing in fs.h should require blk_types.h to be included. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-10-08mm, vmscan: get rid of throttle_vm_writeoutMichal Hocko1-1/+0
throttle_vm_writeout() was introduced back in 2005 to fix OOMs caused by excessive pageout activity during the reclaim. Too many pages could be put under writeback therefore LRUs would be full of unreclaimable pages until the IO completes and in turn the OOM killer could be invoked. There have been some important changes introduced since then in the reclaim path though. Writers are throttled by balance_dirty_pages when initiating the buffered IO and later during the memory pressure, the direct reclaim is throttled by wait_iff_congested if the node is considered congested by dirty pages on LRUs and the underlying bdi is congested by the queued IO. The kswapd is throttled as well if it encounters pages marked for immediate reclaim or under writeback which signals that that there are too many pages under writeback already. Finally should_reclaim_retry does congestion_wait if the reclaim cannot make any progress and there are too many dirty/writeback pages. Another important aspect is that we do not issue any IO from the direct reclaim context anymore. In a heavy parallel load this could queue a lot of IO which would be very scattered and thus unefficient which would just make the problem worse. This three mechanisms should throttle and keep the amount of IO in a steady state even under heavy IO and memory pressure so yet another throttling point doesn't really seem helpful. Quite contrary, Mikulas Patocka has reported that swap backed by dm-crypt doesn't work properly because the swapout IO cannot make sufficient progress as the writeout path depends on dm_crypt worker which has to allocate memory to perform the encryption. In order to guarantee a forward progress it relies on the mempool allocator. mempool_alloc(), however, prefers to use the underlying (usually page) allocator before it grabs objects from the pool. Such an allocation can dive into the memory reclaim and consequently to throttle_vm_writeout. If there are too many dirty or pages under writeback it will get throttled even though it is in fact a flusher to clear pending pages. kworker/u4:0 D ffff88003df7f438 10488 6 2 0x00000000 Workqueue: kcryptd kcryptd_crypt [dm_crypt] Call Trace: schedule+0x3c/0x90 schedule_timeout+0x1d8/0x360 io_schedule_timeout+0xa4/0x110 congestion_wait+0x86/0x1f0 throttle_vm_writeout+0x44/0xd0 shrink_zone_memcg+0x613/0x720 shrink_zone+0xe0/0x300 do_try_to_free_pages+0x1ad/0x450 try_to_free_pages+0xef/0x300 __alloc_pages_nodemask+0x879/0x1210 alloc_pages_current+0xa1/0x1f0 new_slab+0x2d7/0x6a0 ___slab_alloc+0x3fb/0x5c0 __slab_alloc+0x51/0x90 kmem_cache_alloc+0x27b/0x310 mempool_alloc_slab+0x1d/0x30 mempool_alloc+0x91/0x230 bio_alloc_bioset+0xbd/0x260 kcryptd_crypt+0x114/0x3b0 [dm_crypt] Let's just drop throttle_vm_writeout altogether. It is not very much helpful anymore. I have tried to test a potential writeback IO runaway similar to the one described in the original patch which has introduced that [1]. Small virtual machine (512MB RAM, 4 CPUs, 2G of swap space and disk image on a rather slow NFS in a sync mode on the host) with 8 parallel writers each writing 1G worth of data. As soon as the pagecache fills up and the direct reclaim hits then I start anon memory consumer in a loop (allocating 300M and exiting after populating it) in the background to make the memory pressure even stronger as well as to disrupt the steady state for the IO. The direct reclaim is throttled because of the congestion as well as kswapd hitting congestion_wait due to nr_immediate but throttle_vm_writeout doesn't ever trigger the sleep throughout the test. Dirty+writeback are close to nr_dirty_threshold with some fluctuations caused by the anon consumer. [1] https://www2.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.9-rc1/2.6.9-rc1-mm3/broken-out/vm-pageout-throttling.patch Link: http://lkml.kernel.org/r/1471171473-21418-1-git-send-email-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Reported-by: Mikulas Patocka <mpatocka@redhat.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: NeilBrown <neilb@suse.com> Cc: Ondrej Kozina <okozina@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29mm, page_alloc: consider dirtyable memory in terms of nodesMel Gorman1-1/+1
Historically dirty pages were spread among zones but now that LRUs are per-node it is more appropriate to consider dirty pages in a node. Link: http://lkml.kernel.org/r/1467970510-21195-17-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27fs/fs-writeback.c: add a new writeback list for syncDave Chinner1-0/+3
wait_sb_inodes() currently does a walk of all inodes in the filesystem to find dirty one to wait on during sync. This is highly inefficient and wastes a lot of CPU when there are lots of clean cached inodes that we don't need to wait on. To avoid this "all inode" walk, we need to track inodes that are currently under writeback that we need to wait for. We do this by adding inodes to a writeback list on the sb when the mapping is first tagged as having pages under writeback. wait_sb_inodes() can then walk this list of "inodes under IO" and wait specifically just for the inodes that the current sync(2) needs to wait for. Define a couple helpers to add/remove an inode from the writeback list and call them when the overall mapping is tagged for or cleared from writeback. Update wait_sb_inodes() to walk only the inodes under writeback due to the sync. With this change, filesystem sync times are significantly reduced for fs' with largely populated inode caches and otherwise no other work to do. For example, on a 16xcpu 2GHz x86-64 server, 10TB XFS filesystem with a ~10m entry inode cache, sync times are reduced from ~7.3s to less than 0.1s when the filesystem is fully clean. Link: http://lkml.kernel.org/r/1466594593-6757-2-git-send-email-bfoster@redhat.com Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Tested-by: Holger Hoffstätte <holger.hoffstaette@applied-asynchrony.com> Cc: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-04writeback: flush inode cgroup wb switches instead of pinning super_blockTejun Heo1-0/+5
If cgroup writeback is in use, inodes can be scheduled for asynchronous wb switching. Before 5ff8eaac1636 ("writeback: keep superblock pinned during cgroup writeback association switches"), this could race with umount leading to super_block being destroyed while inodes are pinned for wb switching. 5ff8eaac1636 fixed it by bumping s_active while wb switches are in flight; however, this allowed in-flight wb switches to make umounts asynchronous when the userland expected synchronosity - e.g. fsck immediately following umount may fail because the device is still busy. This patch removes the problematic super_block pinning and instead makes generic_shutdown_super() flush in-flight wb switches. wb switches are now executed on a dedicated isw_wq so that they can be flushed and isw_nr_in_flight keeps track of the number of in-flight wb switches so that flushing can be avoided in most cases. v2: Move cgroup_writeback_umount() further below and add MS_ACTIVE check in inode_switch_wbs() as Jan an Al suggested. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Tahsin Erdogan <tahsin@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Al Viro <viro@ZenIV.linux.org.uk> Link: http://lkml.kernel.org/g/CAAeU0aNCq7LGODvVGRU-oU_o-6enii5ey0p1c26D1ZzYwkDc5A@mail.gmail.com Fixes: 5ff8eaac1636 ("writeback: keep superblock pinned during cgroup writeback association switches") Cc: stable@vger.kernel.org #v4.5 Reviewed-by: Jan Kara <jack@suse.cz> Tested-by: Tahsin Erdogan <tahsin@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-06-02writeback: implement foreign cgroup inode detectionTejun Heo1-0/+16
As concurrent write sharing of an inode is expected to be very rare and memcg only tracks page ownership on first-use basis severely confining the usefulness of such sharing, cgroup writeback tracks ownership per-inode. While the support for concurrent write sharing of an inode is deemed unnecessary, an inode being written to by different cgroups at different points in time is a lot more common, and, more importantly, charging only by first-use can too readily lead to grossly incorrect behaviors (single foreign page can lead to gigabytes of writeback to be incorrectly attributed). To resolve this issue, cgroup writeback detects the majority dirtier of an inode and will transfer the ownership to it. To avoid unnnecessary oscillation, the detection mechanism keeps track of history and gives out the switch verdict only if the foreign usage pattern is stable over a certain amount of time and/or writeback attempts. The detection mechanism has fairly low space and computation overhead. It adds 8 bytes to struct inode (one int and two u16's) and minimal amount of calculation per IO. The detection mechanism converges to the correct answer usually in several seconds of IO time when there's a clear majority dirtier. Even when there isn't, it can reach an acceptable answer fairly quickly under most circumstances. Please see wb_detach_inode() for more details. This patch only implements detection. Following patches will implement actual switching. v2: wbc_account_io() now checks whether the wbc is associated with a wb before dereferencing it. This can happen when pageout() is writing pages directly without going through the usual writeback path. As pageout() path is single-threaded, we don't want it to be blocked behind a slow cgroup and ultimately want it to delegate actual writing to the usual writeback path. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-06-02writeback: make writeback_control track the inode being written backTejun Heo1-0/+68
Currently, for cgroup writeback, the IO submission paths directly associate the bio's with the blkcg from inode_to_wb_blkcg_css(); however, it'd be necessary to keep more writeback context to implement foreign inode writeback detection. wbc (writeback_control) is the natural fit for the extra context - it persists throughout the writeback of each inode and is passed all the way down to IO submission paths. This patch adds wbc_attach_and_unlock_inode(), wbc_detach_inode(), and wbc_attach_fdatawrite_inode() which are used to associate wbc with the inode being written back. IO submission paths now use wbc_init_bio() instead of directly associating bio's with blkcg themselves. This leaves inode_to_wb_blkcg_css() w/o any user. The function is removed. wbc currently only tracks the associated wb (bdi_writeback). Future patches will add more for foreign inode detection. The association is established under i_lock which will be depended upon when migrating foreign inodes to other wb's. As currently, once established, inode to wb association never changes, going through wbc when initializing bio's doesn't cause any behavior changes. v2: submit_blk_blkcg() now checks whether the wbc is associated with a wb before dereferencing it. This can happen when pageout() is writing pages directly without going through the usual writeback path. As pageout() path is single-threaded, we don't want it to be blocked behind a slow cgroup and ultimately want it to delegate actual writing to the usual writeback path. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-06-02writeback: relocate wb[_try]_get(), wb_put(), inode_{attach|detach}_wb()Tejun Heo1-0/+46
Currently, majority of cgroup writeback support including all the above functions are implemented in include/linux/backing-dev.h and mm/backing-dev.c; however, the portion closely related to writeback logic implemented in include/linux/writeback.h and mm/page-writeback.c will expand to support foreign writeback detection and correction. This patch moves wb[_try]_get() and wb_put() to include/linux/backing-dev-defs.h so that they can be used from writeback.h and inode_{attach|detach}_wb() to writeback.h and page-writeback.c. This is pure reorganization and doesn't introduce any functional changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-06-02writeback: reset wb_domain->dirty_limit[_tstmp] when memcg domain size changesTejun Heo1-0/+20
The amount of available memory to a memcg wb_domain can change as memcg configuration changes. A domain's ->dirty_limit exists to smooth out sudden drops in dirty threshold; however, when a domain's size actually drops significantly, it hinders the dirty throttling from adjusting to the new configuration leading to unexpected behaviors including unnecessary OOM kills. This patch resolves the issue by adding wb_domain_size_changed() which resets ->dirty_limit[_tstmp] and making memcg call it on configuration changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-06-02writeback: implement memcg wb_domainTejun Heo1-0/+3
Dirtyable memory is distributed to a wb (bdi_writeback) according to the relative bandwidth the wb is writing out in the whole system. This distribution is global - each wb is measured against all other wb's and gets the proportinately sized portion of the memory in the whole system. For cgroup writeback, the amount of dirtyable memory is scoped by memcg and thus each wb would need to be measured and controlled in its memcg. IOW, a wb will belong to two writeback domains - the global and memcg domains. The previous patches laid the groundwork to support the two wb_domains and this patch implements memcg wb_domain. memcg->cgwb_domain is initialized on css online and destroyed on css release, wb->memcg_completions is added, and __wb_writeout_inc() is updated to increment completions against both global and memcg wb_domains. The following patches will update balance_dirty_pages() and its subroutines to actually consider memcg wb_domain for throttling. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-06-02writeback: move over_bground_thresh() to mm/page-writeback.cTejun Heo1-0/+1
and rename it to wb_over_bg_thresh(). The function is closely tied to the dirty throttling mechanism implemented in page-writeback.c. This relocation will allow future updates necessary for cgroup writeback support. While at it, add function comment. This is pure reorganization and doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-06-02writeback: move global_dirty_limit into wb_domainTejun Heo1-1/+16
This patch is a part of the series to define wb_domain which represents a domain that wb's (bdi_writeback's) belong to and are measured against each other in. This will enable IO backpressure propagation for cgroup writeback. global_dirty_limit exists to regulate the global dirty threshold which is a property of the wb_domain. This patch moves hard_dirty_limit, dirty_lock, and update_time into wb_domain. This is pure reorganization and doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-06-02writeback: implement wb_domainTejun Heo1-0/+32
Dirtyable memory is distributed to a wb (bdi_writeback) according to the relative bandwidth the wb is writing out in the whole system. This distribution is global - each wb is measured against all other wb's and gets the proportinately sized portion of the memory in the whole system. For cgroup writeback, the amount of dirtyable memory is scoped by memcg and thus each wb would need to be measured and controlled in its memcg. IOW, a wb will belong to two writeback domains - the global and memcg domains. Currently, what constitutes the global writeback domain are scattered across a number of global states. This patch starts collecting them into struct wb_domain. * fprop_global which serves as the basis for proportional bandwidth measurement and its period timer are moved into struct wb_domain. * global_wb_domain hosts the states for the global domain. * While at it, flatten wb_writeout_fraction() into its callers. This thin wrapper doesn't provide any actual benefits while getting in the way. This is pure reorganization and doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-06-02writeback: reorganize [__]wb_update_bandwidth()Tejun Heo1-8/+1
__wb_update_bandwidth() is called from two places - fs/fs-writeback.c::balance_dirty_pages() and mm/page-writeback.c::wb_writeback(). The latter updates only the write bandwidth while the former also deals with the dirty ratelimit. The two callsites are distinguished by whether @thresh parameter is zero or not, which is cryptic. In addition, the two files define their own different versions of wb_update_bandwidth() on top of __wb_update_bandwidth(), which is confusing to say the least. This patch cleans up [__]wb_update_bandwidth() in the following ways. * __wb_update_bandwidth() now takes explicit @update_ratelimit parameter to gate dirty ratelimit handling. * mm/page-writeback.c::wb_update_bandwidth() is flattened into its caller - balance_dirty_pages(). * fs/fs-writeback.c::wb_update_bandwidth() is moved to mm/page-writeback.c and __wb_update_bandwidth() is made static. * While at it, add a lockdep assertion to __wb_update_bandwidth(). Except for the lockdep addition, this is pure reorganization and doesn't introduce any behavioral changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-06-02writeback: clean up wb_dirty_limit()Tejun Heo1-1/+1
The function name wb_dirty_limit(), its argument @dirty and the local variable @wb_dirty are mortally confusing given that the function calculates per-wb threshold value not dirty pages, especially given that @dirty and @wb_dirty are used elsewhere for dirty pages. Let's rename the function to wb_calc_thresh() and wb_dirty to wb_thresh. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-06-02writeback: restructure try_writeback_inodes_sb[_nr]()Tejun Heo1-3/+3
try_writeback_inodes_sb_nr() wraps writeback_inodes_sb_nr() so that it handles s_umount locking and skips if writeback is already in progress. The in progress test is performed on the root wb (bdi_writeback) which isn't sufficient for cgroup writeback support. The test must be done per-wb. To prepare for the change, this patch factors out __writeback_inodes_sb_nr() from writeback_inodes_sb_nr() and adds @skip_if_busy and moves the in progress test right before queueing the wb_writeback_work. try_writeback_inodes_sb_nr() now just grabs s_umount and invokes __writeback_inodes_sb_nr() with asserted @skip_if_busy. This way, later addition of multiple wb handling can skip only the wb's which already have writeback in progress. This swaps the order between in progress test and s_umount test which can flip the return value when writeback is in progress and s_umount is being held by someone else but this shouldn't cause any meaningful difference. It's a fringe condition and the return value is an unsynchronized hint anyway. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-06-02writeback: move bandwidth related fields from backing_dev_info into ↵Tejun Heo1-10/+9
bdi_writeback Currently, a bdi (backing_dev_info) embeds single wb (bdi_writeback) and the role of the separation is unclear. For cgroup support for writeback IOs, a bdi will be updated to host multiple wb's where each wb serves writeback IOs of a different cgroup on the bdi. To achieve that, a wb should carry all states necessary for servicing writeback IOs for a cgroup independently. This patch moves bandwidth related fields from backing_dev_info into bdi_writeback. * The moved fields are: bw_time_stamp, dirtied_stamp, written_stamp, write_bandwidth, avg_write_bandwidth, dirty_ratelimit, balanced_dirty_ratelimit, completions and dirty_exceeded. * writeback_chunk_size() and over_bground_thresh() now take @wb instead of @bdi. * bdi_writeout_fraction(bdi, ...) -> wb_writeout_fraction(wb, ...) bdi_dirty_limit(bdi, ...) -> wb_dirty_limit(wb, ...) bdi_position_ration(bdi, ...) -> wb_position_ratio(wb, ...) bdi_update_writebandwidth(bdi, ...) -> wb_update_write_bandwidth(wb, ...) [__]bdi_update_bandwidth(bdi, ...) -> [__]wb_update_bandwidth(wb, ...) bdi_{max|min}_pause(bdi, ...) -> wb_{max|min}_pause(wb, ...) bdi_dirty_limits(bdi, ...) -> wb_dirty_limits(wb, ...) * Init/exits of the relocated fields are moved to bdi_wb_init/exit() respectively. Note that explicit zeroing is dropped in the process as wb's are cleared in entirety anyway. * As there's still only one bdi_writeback per backing_dev_info, all uses of bdi->stat[] are mechanically replaced with bdi->wb.stat[] introducing no behavior changes. v2: Typo in description fixed as suggested by Jan. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-03-17fs: add dirtytime_expire_seconds sysctlTheodore Ts'o1-0/+3
Add a tuning knob so we can adjust the dirtytime expiration timeout, which is very useful for testing lazytime. Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz>
2015-01-09mm: protect set_page_dirty() from ongoing truncationJohannes Weiner1-1/+0
Tejun, while reviewing the code, spotted the following race condition between the dirtying and truncation of a page: __set_page_dirty_nobuffers() __delete_from_page_cache() if (TestSetPageDirty(page)) page->mapping = NULL if (PageDirty()) dec_zone_page_state(page, NR_FILE_DIRTY); dec_bdi_stat(mapping->backing_dev_info, BDI_RECLAIMABLE); if (page->mapping) account_page_dirtied(page) __inc_zone_page_state(page, NR_FILE_DIRTY); __inc_bdi_stat(mapping->backing_dev_info, BDI_RECLAIMABLE); which results in an imbalance of NR_FILE_DIRTY and BDI_RECLAIMABLE. Dirtiers usually lock out truncation, either by holding the page lock directly, or in case of zap_pte_range(), by pinning the mapcount with the page table lock held. The notable exception to this rule, though, is do_wp_page(), for which this race exists. However, do_wp_page() already waits for a locked page to unlock before setting the dirty bit, in order to prevent a race where clear_page_dirty() misses the page bit in the presence of dirty ptes. Upgrade that wait to a fully locked set_page_dirty() to also cover the situation explained above. Afterwards, the code in set_page_dirty() dealing with a truncation race is no longer needed. Remove it. Reported-by: Tejun Heo <tj@kernel.org> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-07-16sched: Remove proliferation of wait_on_bit() action functionsNeilBrown1-2/+1
The current "wait_on_bit" interface requires an 'action' function to be provided which does the actual waiting. There are over 20 such functions, many of them identical. Most cases can be satisfied by one of just two functions, one which uses io_schedule() and one which just uses schedule(). So: Rename wait_on_bit and wait_on_bit_lock to wait_on_bit_action and wait_on_bit_lock_action to make it explicit that they need an action function. Introduce new wait_on_bit{,_lock} and wait_on_bit{,_lock}_io which are *not* given an action function but implicitly use a standard one. The decision to error-out if a signal is pending is now made based on the 'mode' argument rather than being encoded in the action function. All instances of the old wait_on_bit and wait_on_bit_lock which can use the new version have been changed accordingly and their action functions have been discarded. wait_on_bit{_lock} does not return any specific error code in the event of a signal so the caller must check for non-zero and interpolate their own error code as appropriate. The wait_on_bit() call in __fscache_wait_on_invalidate() was ambiguous as it specified TASK_UNINTERRUPTIBLE but used fscache_wait_bit_interruptible as an action function. David Howells confirms this should be uniformly "uninterruptible" The main remaining user of wait_on_bit{,_lock}_action is NFS which needs to use a freezer-aware schedule() call. A comment in fs/gfs2/glock.c notes that having multiple 'action' functions is useful as they display differently in the 'wchan' field of 'ps'. (and /proc/$PID/wchan). As the new bit_wait{,_io} functions are tagged "__sched", they will not show up at all, but something higher in the stack. So the distinction will still be visible, only with different function names (gds2_glock_wait versus gfs2_glock_dq_wait in the gfs2/glock.c case). Since first version of this patch (against 3.15) two new action functions appeared, on in NFS and one in CIFS. CIFS also now uses an action function that makes the same freezer aware schedule call as NFS. Signed-off-by: NeilBrown <neilb@suse.de> Acked-by: David Howells <dhowells@redhat.com> (fscache, keys) Acked-by: Steven Whitehouse <swhiteho@redhat.com> (gfs2) Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steve French <sfrench@samba.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20140707051603.28027.72349.stgit@notabene.brown Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-08mm: remove unused arg of set_page_dirty_balance()Miklos Szeredi1-1/+1
There's only one caller of set_page_dirty_balance() and that will call it with page_mkwrite == 0. The page_mkwrite argument was unused since commit b827e496c893 "mm: close page_mkwrite races". Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-02-22Revert "writeback: do not sync data dirtied after sync start"Jan Kara1-1/+1
This reverts commit c4a391b53a72d2df4ee97f96f78c1d5971b47489. Dave Chinner <david@fromorbit.com> has reported the commit may cause some inodes to be left out from sync(2). This is because we can call redirty_tail() for some inode (which sets i_dirtied_when to current time) after sync(2) has started or similarly requeue_inode() can set i_dirtied_when to current time if writeback had to skip some pages. The real problem is in the functions clobbering i_dirtied_when but fixing that isn't trivial so revert is a safer choice for now. CC: stable@vger.kernel.org # >= 3.13 Signed-off-by: Jan Kara <jack@suse.cz>
2013-11-13writeback: do not sync data dirtied after sync startJan Kara1-1/+1
When there are processes heavily creating small files while sync(2) is running, it can easily happen that quite some new files are created between WB_SYNC_NONE and WB_SYNC_ALL pass of sync(2). That can happen especially if there are several busy filesystems (remember that sync traverses filesystems sequentially and waits in WB_SYNC_ALL phase on one fs before starting it on another fs). Because WB_SYNC_ALL pass is slow (e.g. causes a transaction commit and cache flush for each inode in ext3), resulting sync(2) times are rather large. The following script reproduces the problem: function run_writers { for (( i = 0; i < 10; i++ )); do mkdir $1/dir$i for (( j = 0; j < 40000; j++ )); do dd if=/dev/zero of=$1/dir$i/$j bs=4k count=4 &>/dev/null done & done } for dir in "$@"; do run_writers $dir done sleep 40 time sync Fix the problem by disregarding inodes dirtied after sync(2) was called in the WB_SYNC_ALL pass. To allow for this, sync_inodes_sb() now takes a time stamp when sync has started which is used for setting up work for flusher threads. To give some numbers, when above script is run on two ext4 filesystems on simple SATA drive, the average sync time from 10 runs is 267.549 seconds with standard deviation 104.799426. With the patched kernel, the average sync time from 10 runs is 2.995 seconds with standard deviation 0.096. Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Fengguang Wu <fengguang.wu@intel.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-12mm/writeback: make writeback_inodes_wb staticWanpeng Li1-2/+0
It's not used globally and could be static. Signed-off-by: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Rik van Riel <riel@redhat.com> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Tejun Heo <tj@kernel.org> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: David Rientjes <rientjes@google.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09mm/writeback: commit reason of WB_REASON_FORKER_THREAD mismatch nameWanpeng Li1-0/+6
After commit 839a8e8660b6 ("writeback: replace custom worker pool implementation with unbound workqueue"), there is no bdi forker thread any more. However, WB_REASON_FORKER_THREAD is still used due to it is TPs userland visible and we won't be exposing exactly the same information with just a different name. Signed-off-by: Wanpeng Li <liwanp@linux.vnet.ibm.com> Reviewed-by: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09mm/writeback: remove wb_reason_nameWanpeng Li1-1/+0
wb_reason_name is not used any more - remove it. Signed-off-by: Wanpeng Li <liwanp@linux.vnet.ibm.com> Reviewed-by: Tejun Heo <tj@kernel.org> Reviewed-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09fs/fs-writeback.c: : make wb_do_writeback() as staticHaicheng Li1-1/+0
It's not used globally and could be static. Signed-off-by: Haicheng Li <haicheng.li@linux.intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-02sync: don't block the flusher thread waiting on IODave Chinner1-0/+1
When sync does it's WB_SYNC_ALL writeback, it issues data Io and then immediately waits for IO completion. This is done in the context of the flusher thread, and hence completely ties up the flusher thread for the backing device until all the dirty inodes have been synced. On filesystems that are dirtying inodes constantly and quickly, this means the flusher thread can be tied up for minutes per sync call and hence badly affect system level write IO performance as the page cache cannot be cleaned quickly. We already have a wait loop for IO completion for sync(2), so cut this out of the flusher thread and delegate it to wait_sb_inodes(). Hence we can do rapid IO submission, and then wait for it all to complete. Effect of sync on fsmark before the patch: FSUse% Count Size Files/sec App Overhead ..... 0 640000 4096 35154.6 1026984 0 720000 4096 36740.3 1023844 0 800000 4096 36184.6 916599 0 880000 4096 1282.7 1054367 0 960000 4096 3951.3 918773 0 1040000 4096 40646.2 996448 0 1120000 4096 43610.1 895647 0 1200000 4096 40333.1 921048 And a single sync pass took: real 0m52.407s user 0m0.000s sys 0m0.090s After the patch, there is no impact on fsmark results, and each individual sync(2) operation run concurrently with the same fsmark workload takes roughly 7s: real 0m6.930s user 0m0.000s sys 0m0.039s IOWs, sync is 7-8x faster on a busy filesystem and does not have an adverse impact on ongoing async data write operations. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-08aio: don't include aio.h in sched.hKent Overstreet1-0/+1
Faster kernel compiles by way of fewer unnecessary includes. [akpm@linux-foundation.org: fix fallout] [akpm@linux-foundation.org: fix build] Signed-off-by: Kent Overstreet <koverstreet@google.com> Cc: Zach Brown <zab@redhat.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Jens Axboe <axboe@kernel.dk> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Benjamin LaHaise <bcrl@kvack.org> Reviewed-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-01-12vfs: re-implement writeback_inodes_sb(_nr)_if_idle() and rename themMiao Xie1-3/+3
writeback_inodes_sb(_nr)_if_idle() is re-implemented by replacing down_read() with down_read_trylock() because - If ->s_umount is write locked, then the sb is not idle. That is writeback_inodes_sb(_nr)_if_idle() needn't wait for the lock. - writeback_inodes_sb(_nr)_if_idle() grabs s_umount lock when it want to start writeback, it may bring us deadlock problem when doing umount. In order to fix the problem, ext4 and btrfs implemented their own writeback functions instead of writeback_inodes_sb(_nr)_if_idle(), but it introduced the redundant code, it is better to implement a new writeback_inodes_sb(_nr)_if_idle(). The name of these two functions is cumbersome, so rename them to try_to_writeback_inodes_sb(_nr). This idea came from Christoph Hellwig. Some code is from the patch of Kamal Mostafa. Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
2012-12-12writeback: remove nr_pages_dirtied arg from balance_dirty_pages_ratelimited_nr()Namjae Jeon1-8/+1
There is no reason to pass the nr_pages_dirtied argument, because nr_pages_dirtied value from the caller is unused in balance_dirty_pages_ratelimited_nr(). Signed-off-by: Namjae Jeon <linkinjeon@gmail.com> Signed-off-by: Vivek Trivedi <vtrivedi018@gmail.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-08-04vfs: nuke pdflush from commentsArtem Bityutskiy1-1/+0
The pdflush thread is long gone, so this patch removes references to pdflush from vfs comments. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-08-01mm: prepare for removal of obsolete /proc/sys/vm/nr_pdflush_threadsWanpeng Li1-5/+0
Since per-BDI flusher threads were introduced in 2.6, the pdflush mechanism is not used any more. But the old interface exported through /proc/sys/vm/nr_pdflush_threads still exists and is obviously useless. For back-compatibility, printk warning information and return 2 to notify the users that the interface is removed. Signed-off-by: Wanpeng Li <liwp@linux.vnet.ibm.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-06writeback: Avoid iput() from flusher threadJan Kara1-6/+1
Doing iput() from flusher thread (writeback_sb_inodes()) can create problems because iput() can do a lot of work - for example truncate the inode if it's the last iput on unlinked file. Some filesystems depend on flusher thread progressing (e.g. because they need to flush delay allocated blocks to reduce allocation uncertainty) and so flusher thread doing truncate creates interesting dependencies and possibilities for deadlocks. We get rid of iput() in flusher thread by using the fact that I_SYNC inode flag effectively pins the inode in memory. So if we take care to either hold i_lock or have I_SYNC set, we can get away without taking inode reference in writeback_sb_inodes(). As a side effect of these changes, we also fix possible use-after-free in wb_writeback() because inode_wait_for_writeback() call could try to reacquire i_lock on the inode that was already free. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
2012-04-25fs: remove 8 bytes of padding from struct writeback_control on 64 bit buildsRichard Kennedy1-1/+2
Reorder structure writeback_control to remove 8 bytes of padding on 64 bit builds, this shrinks its size from 48 to 40 bytes. This structure is always on the stack and uses C99 named initialisation, so should be safe and have a small impact on stack usage. Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
2012-03-07writeback: fix typo in the writeback_control commentAndrew Morton1-1/+1
Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-01-11Merge branch 'writeback-for-linus' of ↵Linus Torvalds1-5/+4
git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux * 'writeback-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux: writeback: move MIN_WRITEBACK_PAGES to fs-writeback.c writeback: balanced_rate cannot exceed write bandwidth writeback: do strict bdi dirty_exceeded writeback: avoid tiny dirty poll intervals writeback: max, min and target dirty pause time writeback: dirty ratelimit - think time compensation btrfs: fix dirtied pages accounting on sub-page writes writeback: fix dirtied pages accounting on redirty writeback: fix dirtied pages accounting on sub-page writes writeback: charge leaked page dirties to active tasks writeback: Include all dirty inodes in background writeback
2012-01-11mm: try to distribute dirty pages fairly across zonesJohannes Weiner1-0/+1
The maximum number of dirty pages that exist in the system at any time is determined by a number of pages considered dirtyable and a user-configured percentage of those, or an absolute number in bytes. This number of dirtyable pages is the sum of memory provided by all the zones in the system minus their lowmem reserves and high watermarks, so that the system can retain a healthy number of free pages without having to reclaim dirty pages. But there is a flaw in that we have a zoned page allocator which does not care about the global state but rather the state of individual memory zones. And right now there is nothing that prevents one zone from filling up with dirty pages while other zones are spared, which frequently leads to situations where kswapd, in order to restore the watermark of free pages, does indeed have to write pages from that zone's LRU list. This can interfere so badly with IO from the flusher threads that major filesystems (btrfs, xfs, ext4) mostly ignore write requests from reclaim already, taking away the VM's only possibility to keep such a zone balanced, aside from hoping the flushers will soon clean pages from that zone. Enter per-zone dirty limits. They are to a zone's dirtyable memory what the global limit is to the global amount of dirtyable memory, and try to make sure that no single zone receives more than its fair share of the globally allowed dirty pages in the first place. As the number of pages considered dirtyable excludes the zones' lowmem reserves and high watermarks, the maximum number of dirty pages in a zone is such that the zone can always be balanced without requiring page cleaning. As this is a placement decision in the page allocator and pages are dirtied only after the allocation, this patch allows allocators to pass __GFP_WRITE when they know in advance that the page will be written to and become dirty soon. The page allocator will then attempt to allocate from the first zone of the zonelist - which on NUMA is determined by the task's NUMA memory policy - that has not exceeded its dirty limit. At first glance, it would appear that the diversion to lower zones can increase pressure on them, but this is not the case. With a full high zone, allocations will be diverted to lower zones eventually, so it is more of a shift in timing of the lower zone allocations. Workloads that previously could fit their dirty pages completely in the higher zone may be forced to allocate from lower zones, but the amount of pages that "spill over" are limited themselves by the lower zones' dirty constraints, and thus unlikely to become a problem. For now, the problem of unfair dirty page distribution remains for NUMA configurations where the zones allowed for allocation are in sum not big enough to trigger the global dirty limits, wake up the flusher threads and remedy the situation. Because of this, an allocation that could not succeed on any of the considered zones is allowed to ignore the dirty limits before going into direct reclaim or even failing the allocation, until a future patch changes the global dirty throttling and flusher thread activation so that they take individual zone states into account. Test results 15M DMA + 3246M DMA32 + 504 Normal = 3765M memory 40% dirty ratio 16G USB thumb drive 10 runs of dd if=/dev/zero of=disk/zeroes bs=32k count=$((10 << 15)) seconds nr_vmscan_write (stddev) min| median| max xfs vanilla: 549.747( 3.492) 0.000| 0.000| 0.000 patched: 550.996( 3.802) 0.000| 0.000| 0.000 fuse-ntfs vanilla: 1183.094(53.178) 54349.000| 59341.000| 65163.000 patched: 558.049(17.914) 0.000| 0.000| 43.000 btrfs vanilla: 573.679(14.015) 156657.000| 460178.000| 606926.000 patched: 563.365(11.368) 0.000| 0.000| 1362.000 ext4 vanilla: 561.197(15.782) 0.000|2725438.000|4143837.000 patched: 568.806(17.496) 0.000| 0.000| 0.000 Signed-off-by: Johannes Weiner <jweiner@redhat.com> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Acked-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Michal Hocko <mhocko@suse.cz> Tested-by: Wu Fengguang <fengguang.wu@intel.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Jan Kara <jack@suse.cz> Cc: Shaohua Li <shaohua.li@intel.com> Cc: Rik van Riel <riel@redhat.com> Cc: Chris Mason <chris.mason@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-11mm/page-writeback.c: make determine_dirtyable_memory static againJohannes Weiner1-2/+0
The tracing ring-buffer used this function briefly, but not anymore. Make it local to the writeback code again. Also, move the function so that no forward declaration needs to be reintroduced. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Michal Hocko <mhocko@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-08writeback: move MIN_WRITEBACK_PAGES to fs-writeback.cWu Fengguang1-5/+0
Fix compile error fs/fs-writeback.c:515:33: error: ‘PAGE_CACHE_SHIFT’ undeclared (first use in this function) Reported-by: Randy Dunlap <rdunlap@xenotime.net> Acked-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
2011-12-18writeback: fix dirtied pages accounting on redirtyWu Fengguang1-0/+2
De-account the accumulative dirty counters on page redirty. Page redirties (very common in ext4) will introduce mismatch between counters (a) and (b) a) NR_DIRTIED, BDI_DIRTIED, tsk->nr_dirtied b) NR_WRITTEN, BDI_WRITTEN This will introduce systematic errors in balanced_rate and result in dirty page position errors (ie. the dirty pages are no longer balanced around the global/bdi setpoints). Acked-by: Jan Kara <jack@suse.cz> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
2011-12-18writeback: charge leaked page dirties to active tasksWu Fengguang1-0/+2
It's a years long problem that a large number of short-lived dirtiers (eg. gcc instances in a fast kernel build) may starve long-run dirtiers (eg. dd) as well as pushing the dirty pages to the global hard limit. The solution is to charge the pages dirtied by the exited gcc to the other random dirtying tasks. It sounds not perfect, however should behave good enough in practice, seeing as that throttled tasks aren't actually running so those that are running are more likely to pick it up and get throttled, therefore promoting an equal spread. Randy: fix compile error: 'dirty_throttle_leaks' undeclared in exit.c Acked-by: Jan Kara <jack@suse.cz> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
2011-10-30writeback: Add a 'reason' to wb_writeback_workCurt Wohlgemuth1-6/+26
This creates a new 'reason' field in a wb_writeback_work structure, which unambiguously identifies who initiates writeback activity. A 'wb_reason' enumeration has been added to writeback.h, to enumerate the possible reasons. The 'writeback_work_class' and tracepoint event class and 'writeback_queue_io' tracepoints are updated to include the symbolic 'reason' in all trace events. And the 'writeback_inodes_sbXXX' family of routines has had a wb_stats parameter added to them, so callers can specify why writeback is being started. Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Curt Wohlgemuth <curtw@google.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
2011-10-03writeback: add bg_threshold parameter to __bdi_update_bandwidth()Wu Fengguang1-0/+1
No behavior change. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
2011-08-19squeeze max-pause area and drop pass-good areaWu Fengguang1-11/+0
Revert the pass-good area introduced in ffd1f609ab10 ("writeback: introduce max-pause and pass-good dirty limits") and make the max-pause area smaller and safe. This fixes ~30% performance regression in the ext3 data=writeback fio_mmap_randwrite_64k/fio_mmap_randrw_64k test cases, where there are 12 JBOD disks, on each disk runs 8 concurrent tasks doing reads+writes. Using deadline scheduler also has a regression, but not that big as CFQ, so this suggests we have some write starvation. The test logs show that - the disks are sometimes under utilized - global dirty pages sometimes rush high to the pass-good area for several hundred seconds, while in the mean time some bdi dirty pages drop to very low value (bdi_dirty << bdi_thresh). Then suddenly the global dirty pages dropped under global dirty threshold and bdi_dirty rush very high (for example, 2 times higher than bdi_thresh). During which time balance_dirty_pages() is not called at all. So the problems are 1) The random writes progress so slow that they break the assumption of the max-pause logic that "8 pages per 200ms is typically more than enough to curb heavy dirtiers". 2) The max-pause logic ignored task_bdi_thresh and thus opens the possibility for some bdi's to over dirty pages, leading to (bdi_dirty >> bdi_thresh) and then (bdi_thresh >> bdi_dirty) for others. 3) The higher max-pause/pass-good thresholds somehow leads to the bad swing of dirty pages. The fix is to allow the task to slightly dirty over task_bdi_thresh, but no way to exceed bdi_dirty and/or global dirty_thresh. Tests show that it fixed the JBOD regression completely (both behavior and performance), while still being able to cut down large pause times in balance_dirty_pages() for single-disk cases. Reported-by: Li Shaohua <shaohua.li@intel.com> Tested-by: Li Shaohua <shaohua.li@intel.com> Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>