summaryrefslogtreecommitdiff
path: root/include/linux/usb
AgeCommit message (Collapse)AuthorFilesLines
9 daysMerge tag 'usb-7.0-rc1' of ↵Linus Torvalds6-56/+68
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt updates from Greg KH: "Here is the "big" set of USB and Thunderbolt driver updates for 7.0-rc1. Overall more lines were removed than added, thanks to dropping the obsolete isp1362 USB host controller driver, always a nice change. Other than that, nothing major happening here, highlights are: - lots of dwc3 driver updates and new hardware support added - usb gadget function driver updates - usb phy driver updates - typec driver updates and additions - USB rust binding updates for syntax and formatting changes - more usb serial device ids added - other smaller USB core and driver updates and additions All of these have been in linux-next for a long time, with no reported problems" * tag 'usb-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (77 commits) usb: typec: ucsi: Add Thunderbolt alternate mode support usb: typec: hd3ss3220: Check if regulator needs to be switched usb: phy: tegra: parametrize PORTSC1 register offset usb: phy: tegra: parametrize HSIC PTS value usb: phy: tegra: return error value from utmi_wait_register usb: phy: tegra: cosmetic fixes dt-bindings: usb: renesas,usbhs: Add RZ/G3E SoC support usb: dwc2: fix resume failure if dr_mode is host usb: cdns3: fix role switching during resume usb: dwc3: gadget: Move vbus draw to workqueue context USB: serial: option: add Telit FN920C04 RNDIS compositions usb: dwc3: Log dwc3 address in traces usb: gadget: tegra-xudc: Add handling for BLCG_COREPLL_PWRDN usb: phy: tegra: add HSIC support usb: phy: tegra: use phy type directly usb: typec: ucsi: Enforce mode selection for cros_ec_ucsi usb: typec: ucsi: Support mode selection to activate altmodes usb: typec: Introduce mode_selection bit usb: typec: Implement mode selection usb: typec: Expose alternate mode priority via sysfs ...
2026-02-12Merge tag 'net-next-7.0' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Paolo Abeni: "Core & protocols: - A significant effort all around the stack to guide the compiler to make the right choice when inlining code, to avoid unneeded calls for small helper and stack canary overhead in the fast-path. This generates better and faster code with very small or no text size increases, as in many cases the call generated more code than the actual inlined helper. - Extend AccECN implementation so that is now functionally complete, also allow the user-space enabling it on a per network namespace basis. - Add support for memory providers with large (above 4K) rx buffer. Paired with hw-gro, larger rx buffer sizes reduce the number of buffers traversing the stack, dincreasing single stream CPU usage by up to ~30%. - Do not add HBH header to Big TCP GSO packets. This simplifies the RX path, the TX path and the NIC drivers, and is possible because user-space taps can now interpret correctly such packets without the HBH hint. - Allow IPv6 routes to be configured with a gateway address that is resolved out of a different interface than the one specified, aligning IPv6 to IPv4 behavior. - Multi-queue aware sch_cake. This makes it possible to scale the rate shaper of sch_cake across multiple CPUs, while still enforcing a single global rate on the interface. - Add support for the nbcon (new buffer console) infrastructure to netconsole, enabling lock-free, priority-based console operations that are safer in crash scenarios. - Improve the TCP ipv6 output path to cache the flow information, saving cpu cycles, reducing cache line misses and stack use. - Improve netfilter packet tracker to resolve clashes for most protocols, avoiding unneeded drops on rare occasions. - Add IP6IP6 tunneling acceleration to the flowtable infrastructure. - Reduce tcp socket size by one cache line. - Notify neighbour changes atomically, avoiding inconsistencies between the notification sequence and the actual states sequence. - Add vsock namespace support, allowing complete isolation of vsocks across different network namespaces. - Improve xsk generic performances with cache-alignment-oriented optimizations. - Support netconsole automatic target recovery, allowing netconsole to reestablish targets when underlying low-level interface comes back online. Driver API: - Support for switching the working mode (automatic vs manual) of a DPLL device via netlink. - Introduce PHY ports representation to expose multiple front-facing media ports over a single MAC. - Introduce "rx-polarity" and "tx-polarity" device tree properties, to generalize polarity inversion requirements for differential signaling. - Add helper to create, prepare and enable managed clocks. Device drivers: - Add Huawei hinic3 PF etherner driver. - Add DWMAC glue driver for Motorcomm YT6801 PCIe ethernet controller. - Add ethernet driver for MaxLinear MxL862xx switches - Remove parallel-port Ethernet driver. - Convert existing driver timestamp configuration reporting to hwtstamp_get and remove legacy ioctl(). - Convert existing drivers to .get_rx_ring_count(), simplifing the RX ring count retrieval. Also remove the legacy fallback path. - Ethernet high-speed NICs: - Broadcom (bnxt, bng): - bnxt: add FW interface update to support FEC stats histogram and NVRAM defragmentation - bng: add TSO and H/W GRO support - nVidia/Mellanox (mlx5): - improve latency of channel restart operations, reducing the used H/W resources - add TSO support for UDP over GRE over VLAN - add flow counters support for hardware steering (HWS) rules - use a static memory area to store headers for H/W GRO, leading to 12% RX tput improvement - Intel (100G, ice, idpf): - ice: reorganizes layout of Tx and Rx rings for cacheline locality and utilizes __cacheline_group* macros on the new layouts - ice: introduces Synchronous Ethernet (SyncE) support - Meta (fbnic): - adds debugfs for firmware mailbox and tx/rx rings vectors - Ethernet virtual: - geneve: introduce GRO/GSO support for double UDP encapsulation - Ethernet NICs consumer, and embedded: - Synopsys (stmmac): - some code refactoring and cleanups - RealTek (r8169): - add support for RTL8127ATF (10G Fiber SFP) - add dash and LTR support - Airoha: - AN8811HB 2.5 Gbps phy support - Freescale (fec): - add XDP zero-copy support - Thunderbolt: - add get link setting support to allow bonding - Renesas: - add support for RZ/G3L GBETH SoC - Ethernet switches: - Maxlinear: - support R(G)MII slow rate configuration - add support for Intel GSW150 - Motorcomm (yt921x): - add DCB/QoS support - TI: - icssm-prueth: support bridging (STP/RSTP) via the switchdev framework - Ethernet PHYs: - Realtek: - enable SGMII and 2500Base-X in-band auto-negotiation - simplify and reunify C22/C45 drivers - Micrel: convert bindings to DT schema - CAN: - move skb headroom content into skb extensions, making CAN metadata access more robust - CAN drivers: - rcar_canfd: - add support for FD-only mode - add support for the RZ/T2H SoC - sja1000: cleanup the CAN state handling - WiFi: - implement EPPKE/802.1X over auth frames support - split up drop reasons better, removing generic RX_DROP - additional FTM capabilities: 6 GHz support, supported number of spatial streams and supported number of LTF repetitions - better mac80211 iterators to enumerate resources - initial UHR (Wi-Fi 8) support for cfg80211/mac80211 - WiFi drivers: - Qualcomm/Atheros: - ath11k: support for Channel Frequency Response measurement - ath12k: a significant driver refactor to support multi-wiphy devices and and pave the way for future device support in the same driver (rather than splitting to ath13k) - ath12k: support for the QCC2072 chipset - Intel: - iwlwifi: partial Neighbor Awareness Networking (NAN) support - iwlwifi: initial support for U-NII-9 and IEEE 802.11bn - RealTek (rtw89): - preparations for RTL8922DE support - Bluetooth: - implement setsockopt(BT_PHY) to set the connection packet type/PHY - set link_policy on incoming ACL connections - Bluetooth drivers: - btusb: add support for MediaTek7920, Realtek RTL8761BU and 8851BE - btqca: add WCN6855 firmware priority selection feature" * tag 'net-next-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1254 commits) bnge/bng_re: Add a new HSI net: macb: Fix tx/rx malfunction after phy link down and up af_unix: Fix memleak of newsk in unix_stream_connect(). net: ti: icssg-prueth: Add optional dependency on HSR net: dsa: add basic initial driver for MxL862xx switches net: mdio: add unlocked mdiodev C45 bus accessors net: dsa: add tag format for MxL862xx switches dt-bindings: net: dsa: add MaxLinear MxL862xx selftests: drivers: net: hw: Modify toeplitz.c to poll for packets octeontx2-pf: Unregister devlink on probe failure net: renesas: rswitch: fix forwarding offload statemachine ionic: Rate limit unknown xcvr type messages tcp: inet6_csk_xmit() optimization tcp: populate inet->cork.fl.u.ip6 in tcp_v6_syn_recv_sock() tcp: populate inet->cork.fl.u.ip6 in tcp_v6_connect() ipv6: inet6_csk_xmit() and inet6_csk_update_pmtu() use inet->cork.fl.u.ip6 ipv6: use inet->cork.fl.u.ip6 and np->final in ip6_datagram_dst_update() ipv6: use np->final in inet6_sk_rebuild_header() ipv6: add daddr/final storage in struct ipv6_pinfo net: stmmac: qcom-ethqos: fix qcom_ethqos_serdes_powerup() ...
2026-02-11Merge tag 'media/v7.0-2' of ↵Linus Torvalds1-0/+8
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - Add support for GMSL1 and GMSL‑coax modules (PCI mgb4) - Add driver for TI VIP - AV1 – first kernel support (pixel‑format, decoder, transcoder) - Three new camera‑sensor drivers (os05b10, s5k3m5, s5kjn1) - Synopsys CSI‑2 receiver driver - Verisilicon & rkvdec – major fixes and enhancements - IPU6 (and 7) fixes and preparation for metadata - omap3isp: v4l2-compliance updates - Fix DVB streaming, drop wait_prepare/finish (dvb/vb2) * tag 'media/v7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (307 commits) media: uvcvideo: Pass allocation size directly to uvc_alloc_urb_buffer media: uvcvideo: Fix allocation for small frame sizes media: uvcvideo: Return queued buffers on start_streaming() failure media: uvcvideo: Create an ID namespace for streaming output terminals media: rkvdec: Add HEVC support for the VDPU383 variant media: rkvdec: Add HEVC support for the VDPU381 variant media: rkvdec: Add H264 support for the VDPU383 variant media: rkvdec: Add H264 support for the VDPU381 variant media: rkvdec: Disable multicore support media: rkvdec: Enable all clocks without naming them media: rkvdec: Support per-variant interrupt handler media: rkvdec: Add RCB and SRAM support media: rkvdec: Add variant specific coded formats list media: rkvdec: Move hevc functions to common file media: rkvdec: Move h264 functions to common file media: rkvdec: Use structs to represent the HW RPS media: rkvdec: Move cabac tables to their own source file media: rkvdec: Switch to using structs instead of writel media: visl: Add HEVC short and long term RPS sets media: v4l2-ctrls: Add hevc_ext_sps_[ls]t_rps controls ...
2026-02-05usb: phy: tegra: parametrize PORTSC1 register offsetSvyatoslav Ryhel1-0/+2
The PORTSC1 register has a different offset in Tegra20 compared to Tegra30+, yet they share a crucial set of registers required for HSIC functionality. Reflect this register offset change in the SoC config. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com> Link: https://patch.msgid.link/20260202080526.23487-5-clamor95@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-02-05usb: phy: tegra: parametrize HSIC PTS valueSvyatoslav Ryhel1-0/+2
The parallel transceiver select used in HSIC mode differs on Tegra20, where it uses the UTMI value (0), whereas Tegra30+ uses a dedicated HSIC value. Reflect this in the SoC config. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com> Link: https://patch.msgid.link/20260202080526.23487-4-clamor95@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-02-05usb: phy: tegra: cosmetic fixesSvyatoslav Ryhel1-2/+2
Change TEGRA_USB_HOSTPC1_DEVLC_PTS_HSIC to its literal value instead of using the BIT macro, as it is an enumeration. Correct the spelling in the comment and rename uhsic_registers_shift to uhsic_registers_offset. These changes are cosmetic and do not affect code behavior. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com> Link: https://patch.msgid.link/20260202080526.23487-2-clamor95@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-02-04net: usb: introduce usbnet_mii_ioctl helper functionEthan Nelson-Moore1-0/+1
Many USB network drivers use identical code to pass ioctl requests on to the MII layer. Reduce code duplication by refactoring this code into a helper function. Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> (v1) Reviewed-by: Andrew Lunn <andrew@lunn.ch> (v3) Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/20260203013517.26170-1-enelsonmoore@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-23usb: phy: tegra: add HSIC supportSvyatoslav Ryhel1-0/+5
Add support for HSIC USB mode, which can be set for second USB controller and PHY on Tegra SoC along with already supported UTMI or ULPI. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Link: https://patch.msgid.link/20260122151125.7367-3-clamor95@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-01-23usb: phy: tegra: use phy type directlySvyatoslav Ryhel1-1/+1
Refactor to directly use enum usb_phy_interface to determine the PHY mode. This change is in preparation for adding support for HSIC mode. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Link: https://patch.msgid.link/20260122151125.7367-2-clamor95@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-01-23usb: typec: Introduce mode_selection bitAndrei Kuchynski2-0/+2
The port driver sets this bit for an alternate mode description to indicate support for the mode selection feature. Once set, individual Alt Mode drivers will no longer attempt to activate their respective modes within their probe functions. This prevents race conditions and non-prioritized activation. The bit is not set by default. If left unset, the system retains the current behavior where Alt Mode drivers manage their own activation logic. Signed-off-by: Andrei Kuchynski <akuchynski@chromium.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://patch.msgid.link/20260119131824.2529334-6-akuchynski@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-01-23usb: typec: Implement mode selectionAndrei Kuchynski1-0/+40
The mode selection process is controlled by the following API functions, which allow to initiate and complete mode entry based on the priority of each mode: `typec_mode_selection_start` function compiles a priority list of supported Alternate Modes. `typec_altmode_state_update` function is invoked by the port driver to communicate the current mode of the Type-C connector. `typec_mode_selection_delete` function stops the currently running mode selection process and releases all associated system resources. `mode_selection_work_fn` task attempts to activate modes. The process stops on success; otherwise, it proceeds to the next mode after a timeout or error. Signed-off-by: Andrei Kuchynski <akuchynski@chromium.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://patch.msgid.link/20260119131824.2529334-5-akuchynski@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-01-23usb: typec: Expose alternate mode priority via sysfsAndrei Kuchynski1-0/+1
This patch introduces a priority sysfs attribute to the USB Type-C alternate mode port interface. This new attribute allows user-space to configure the numeric priority of alternate modes managing their preferred order of operation. If a new priority value conflicts with an existing mode's priority, the priorities of the conflicting mode and all subsequent modes are automatically incremented to ensure uniqueness. Signed-off-by: Andrei Kuchynski <akuchynski@chromium.org> Reviewed-by: Benson Leung <bleung@chromium.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://patch.msgid.link/20260119131824.2529334-4-akuchynski@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-01-23usb: typec: Add mode_control field to port propertyAndrei Kuchynski1-0/+2
This new field in the port properties dictates whether the Platform Policy Manager (PPM) allows the OS Policy Manager (OPM) to change the currently active, negotiated alternate mode. Signed-off-by: Andrei Kuchynski <akuchynski@chromium.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Benson Leung <bleung@chromium.org> Link: https://patch.msgid.link/20260119131824.2529334-2-akuchynski@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-01-19Merge 6.19-rc6 usb-nextGreg Kroah-Hartman1-0/+3
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-01-14USB: HCD: remove logic about which hcd is loadedGreg Kroah-Hartman1-6/+0
It turns out that warning about which USB host controller is loaded before another one doesn't really matter. All that really is needed is the PCI softdep module loading logic, which has been present in the kernel ever since commit 05c92da0c524 ("usb: ohci/uhci - add soft dependencies on ehci_pci") So remove the warning messages, they are not useful, not needed, and only confuse people. As can be seen in the discussion at https://lore.kernel.org/r/20251230080014.3934590-1-chenhuacai@loongson.cn Cc: Huacai Chen <chenhuacai@loongson.cn> Suggested-by: Alan Stern <stern@rowland.harvard.edu> Reviewed-by: Huacai Chen <chenhuacai@loongson.cn> Link: https://patch.msgid.link/2026010739-diffuser-shelter-e31c@gregkh Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-01-07usb: core: add USB_QUIRK_NO_BOS for devices that hang on BOS descriptorJohannes Brüderl1-0/+3
Add USB_QUIRK_NO_BOS quirk flag to skip requesting the BOS descriptor for devices that cannot handle it. Add Elgato 4K X (0fd9:009b) to the quirk table. This device hangs when the BOS descriptor is requested at SuperSpeed Plus (10Gbps). Link: https://bugzilla.kernel.org/show_bug.cgi?id=220027 Cc: stable <stable@kernel.org> Signed-off-by: Johannes Brüderl <johannes.bruederl@gmail.com> Link: https://patch.msgid.link/20251207090220.14807-1-johannes.bruederl@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-01-07usb: isp1362-hcd: remove Philips ISP1362 USB OTG controller driverVladimir Zapolskiy1-47/+0
The last user of the platform driver was a Blackfin BF533 powered board, and it was removed in commit 4ba66a976072 ("arch: remove blackfin port") along with the whole Blackfin architecture support 7 years ago. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Link: https://patch.msgid.link/20251226000237.1440642-1-vz@mleia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-01-05media: uvcvideo: Document how to format GUIDsRicardo Ribalda1-0/+8
Manual formatting the GUIDs can lead to errors, document a programmatically way to format the GUIDs from lsusb into something that the driver can use. Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com> Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
2025-12-23usb: gadget: Constify struct configfs_item_operations and ↵Christophe JAILLET1-2/+2
configfs_group_operations 'struct configfs_item_operations' and 'configfs_group_operations' are not modified in these drivers. Constifying these structures moves some data to a read-only section, so increases overall security, especially when the structure holds some function pointers. On a x86_64, with allmodconfig, as an example: Before: ====== text data bss dec hex filename 65061 20968 256 86285 1510d drivers/usb/gadget/configfs.o After: ===== text data bss dec hex filename 66181 19848 256 86285 1510d drivers/usb/gadget/configfs.o Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://patch.msgid.link/49cec1cb84425f854de80b6d69b53a5a3cda8189.1766164523.git.christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-17usb: typec: Export typec bus and typec altmode device typeChaoyi Chen2-0/+11
The DRM may want to register a notifier on the typec bus to know when a typec altmode device is added, and distinguish between different types of typec altmode device. Export these things. Signed-off-by: Chaoyi Chen <chaoyi.chen@rock-chips.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://patch.msgid.link/20251208015500.94-3-kernel@airkyi.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-07Merge tag 'usb-6.19-rc1' of ↵Linus Torvalds4-1/+83
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt driver updates for 6.19-rc1. Nothing major here, just lots of tiny updates for most of the common USB drivers. Included in here are: - more xhci driver updates and fixes - Thunderbolt driver cleanups - usb serial driver updates - typec driver updates - USB tracepoint additions - dwc3 driver updates, including support for Apple hardware - lots of other smaller driver updates and cleanups All of these have been in linux-next for a while with no reported issues" * tag 'usb-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (161 commits) usb: gadget: tegra-xudc: Always reinitialize data toggle when clear halt USB: serial: option: move Telit 0x10c7 composition in the right place USB: serial: option: add Telit Cinterion FE910C04 new compositions usb: typec: ucsi: fix use-after-free caused by uec->work usb: typec: ucsi: fix probe failure in gaokun_ucsi_probe() usb: dwc3: core: Remove redundant comment in core init usb: phy: Initialize struct usb_phy list_head USB: serial: option: add Foxconn T99W760 usb: usb-storage: No additional quirks need to be added to the EL-R12 optical drive. usb: typec: hd3ss3220: Enable VBUS based on ID pin state dt-bindings: usb: ti,hd3ss3220: Add support for VBUS based on ID state usb: typec: anx7411: add WQ_PERCPU to alloc_workqueue users USB: add WQ_PERCPU to alloc_workqueue users dt-bindings: usb: dwc3-xilinx: Describe the reset constraint for the versal platform drivers/usb/storage: use min() instead of min_t() usb: raw-gadget: cap raw_io transfer length to KMALLOC_MAX_SIZE usb: ohci-da8xx: remove unused platform data usb: gadget: functionfs: use dma_buf_unmap_attachment_unlocked() helper usb: uas: reduce time under spinlock usb: dwc3: eic7700: Add EIC7700 USB driver ...
2025-12-05Merge tag 'pmdomain-v6.19' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm Pull pmdomain updates from Ulf Hansson: "pmdomain core: - Allow power-off for out-of-band wakeup-capable devices - Drop the redundant call to dev_pm_domain_detach() for the amba bus - Extend the genpd governor for CPUs to account for IPIs pmdomain providers: - bcm: Add support for BCM2712 - mediatek: Add support for MFlexGraphics power domains - mediatek: Add support for MT8196 power domains - qcom: Add RPMh power domain support for Kaanapali - rockchip: Add support for RV1126B pmdomain consumers: - usb: dwc3: Enable out of band wakeup for i.MX95 - usb: chipidea: Enable out of band wakeup for i.MX95" * tag 'pmdomain-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (26 commits) pmdomain: Extend the genpd governor for CPUs to account for IPIs smp: Introduce a helper function to check for pending IPIs pmdomain: mediatek: convert from clk round_rate() to determine_rate() amba: bus: Drop dev_pm_domain_detach() call pmdomain: bcm: bcm2835-power: Prepare to support BCM2712 pmdomain: mediatek: mtk-mfg: select MAILBOX in Kconfig pmdomain: mediatek: Add support for MFlexGraphics pmdomain: mediatek: Fix build-errors cpuidle: psci: Replace deprecated strcpy in psci_idle_init_cpu pmdomain: rockchip: Add support for RV1126B pmdomain: mediatek: Add support for MT8196 HFRPSYS power domains pmdomain: mediatek: Add support for MT8196 SCPSYS power domains pmdomain: mediatek: Add support for secure HWCCF infra power on pmdomain: mediatek: Add support for Hardware Voter power domains pmdomain: qcom: rpmhpd: Add RPMh power domain support for Kaanapali usb: dwc3: imx8mp: Set out of band wakeup for i.MX95 usb: chipidea: ci_hdrc_imx: Set out of band wakeup for i.MX95 usb: chipidea: core: detach power domain for ci_hdrc platform device pmdomain: core: Allow power-off for out-of-band wakeup-capable devices PM: wakeup: Add out-of-band system wakeup support for devices ...
2025-12-04Merge tag 'net-next-6.19' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core & protocols: - Replace busylock at the Tx queuing layer with a lockless list. Resulting in a 300% (4x) improvement on heavy TX workloads, sending twice the number of packets per second, for half the cpu cycles. - Allow constantly busy flows to migrate to a more suitable CPU/NIC queue. Normally we perform queue re-selection when flow comes out of idle, but under extreme circumstances the flows may be constantly busy. Add sysctl to allow periodic rehashing even if it'd risk packet reordering. - Optimize the NAPI skb cache, make it larger, use it in more paths. - Attempt returning Tx skbs to the originating CPU (like we already did for Rx skbs). - Various data structure layout and prefetch optimizations from Eric. - Remove ktime_get() from the recvmsg() fast path, ktime_get() is sadly quite expensive on recent AMD machines. - Extend threaded NAPI polling to allow the kthread busy poll for packets. - Make MPTCP use Rx backlog processing. This lowers the lock pressure, improving the Rx performance. - Support memcg accounting of MPTCP socket memory. - Allow admin to opt sockets out of global protocol memory accounting (using a sysctl or BPF-based policy). The global limits are a poor fit for modern container workloads, where limits are imposed using cgroups. - Improve heuristics for when to kick off AF_UNIX garbage collection. - Allow users to control TCP SACK compression, and default to 33% of RTT. - Add tcp_rcvbuf_low_rtt sysctl to let datacenter users avoid unnecessarily aggressive rcvbuf growth and overshot when the connection RTT is low. - Preserve skb metadata space across skb_push / skb_pull operations. - Support for IPIP encapsulation in the nftables flowtable offload. - Support appending IP interface information to ICMP messages (RFC 5837). - Support setting max record size in TLS (RFC 8449). - Remove taking rtnl_lock from RTM_GETNEIGHTBL and RTM_SETNEIGHTBL. - Use a dedicated lock (and RCU) in MPLS, instead of rtnl_lock. - Let users configure the number of write buffers in SMC. - Add new struct sockaddr_unsized for sockaddr of unknown length, from Kees. - Some conversions away from the crypto_ahash API, from Eric Biggers. - Some preparations for slimming down struct page. - YAML Netlink protocol spec for WireGuard. - Add a tool on top of YAML Netlink specs/lib for reporting commonly computed derived statistics and summarized system state. Driver API: - Add CAN XL support to the CAN Netlink interface. - Add uAPI for reporting PHY Mean Square Error (MSE) diagnostics, as defined by the OPEN Alliance's "Advanced diagnostic features for 100BASE-T1 automotive Ethernet PHYs" specification. - Add DPLL phase-adjust-gran pin attribute (and implement it in zl3073x). - Refactor xfrm_input lock to reduce contention when NIC offloads IPsec and performs RSS. - Add info to devlink params whether the current setting is the default or a user override. Allow resetting back to default. - Add standard device stats for PSP crypto offload. - Leverage DSA frame broadcast to implement simple HSR frame duplication for a lot of switches without dedicated HSR offload. - Add uAPI defines for 1.6Tbps link modes. Device drivers: - Add Motorcomm YT921x gigabit Ethernet switch support. - Add MUCSE driver for N500/N210 1GbE NIC series. - Convert drivers to support dedicated ops for timestamping control, and away from the direct IOCTL handling. While at it support GET operations for PHY timestamping. - Add (and convert most drivers to) a dedicated ethtool callback for reading the Rx ring count. - Significant refactoring efforts in the STMMAC driver, which supports Synopsys turn-key MAC IP integrated into a ton of SoCs. - Ethernet high-speed NICs: - Broadcom (bnxt): - support PPS in/out on all pins - Intel (100G, ice, idpf): - ice: implement standard ethtool and timestamping stats - i40e: support setting the max number of MAC addresses per VF - iavf: support RSS of GTP tunnels for 5G and LTE deployments - nVidia/Mellanox (mlx5): - reduce downtime on interface reconfiguration - disable being an XDP redirect target by default (same as other drivers) to avoid wasting resources if feature is unused - Meta (fbnic): - add support for Linux-managed PCS on 25G, 50G, and 100G links - Wangxun: - support Rx descriptor merge, and Tx head writeback - support Rx coalescing offload - support 25G SPF and 40G QSFP modules - Ethernet virtual: - Google (gve): - allow ethtool to configure rx_buf_len - implement XDP HW RX Timestamping support for DQ descriptor format - Microsoft vNIC (mana): - support HW link state events - handle hardware recovery events when probing the device - Ethernet NICs consumer, and embedded: - usbnet: add support for Byte Queue Limits (BQL) - AMD (amd-xgbe): - add device selftests - NXP (enetc): - add i.MX94 support - Broadcom integrated MACs (bcmgenet, bcmasp): - bcmasp: add support for PHY-based Wake-on-LAN - Broadcom switches (b53): - support port isolation - support BCM5389/97/98 and BCM63XX ARL formats - Lantiq/MaxLinear switches: - support bridge FDB entries on the CPU port - use regmap for register access - allow user to enable/disable learning - support Energy Efficient Ethernet - support configuring RMII clock delays - add tagging driver for MaxLinear GSW1xx switches - Synopsys (stmmac): - support using the HW clock in free running mode - add Eswin EIC7700 support - add Rockchip RK3506 support - add Altera Agilex5 support - Cadence (macb): - cleanup and consolidate descriptor and DMA address handling - add EyeQ5 support - TI: - icssg-prueth: support AF_XDP - Airoha access points: - add missing Ethernet stats and link state callback - add AN7583 support - support out-of-order Tx completion processing - Power over Ethernet: - pd692x0: preserve PSE configuration across reboots - add support for TPS23881B devices - Ethernet PHYs: - Open Alliance OATC14 10BASE-T1S PHY cable diagnostic support - Support 50G SerDes and 100G interfaces in Linux-managed PHYs - micrel: - support for non PTP SKUs of lan8814 - enable in-band auto-negotiation on lan8814 - realtek: - cable testing support on RTL8224 - interrupt support on RTL8221B - motorcomm: support for PHY LEDs on YT853 - microchip: support for LAN867X Rev.D0 PHYs w/ SQI and cable diag - mscc: support for PHY LED control - CAN drivers: - m_can: add support for optional reset and system wake up - remove can_change_mtu() obsoleted by core handling - mcp251xfd: support GPIO controller functionality - Bluetooth: - add initial support for PASTa - WiFi: - split ieee80211.h file, it's way too big - improvements in VHT radiotap reporting, S1G, Channel Switch Announcement handling, rate tracking in mesh networks - improve multi-radio monitor mode support, and add a cfg80211 debugfs interface for it - HT action frame handling on 6 GHz - initial chanctx work towards NAN - MU-MIMO sniffer improvements - WiFi drivers: - RealTek (rtw89): - support USB devices RTL8852AU and RTL8852CU - initial work for RTL8922DE - improved injection support - Intel: - iwlwifi: new sniffer API support - MediaTek (mt76): - WED support for >32-bit DMA - airoha NPU support - regdomain improvements - continued WiFi7/MLO work - Qualcomm/Atheros: - ath10k: factory test support - ath11k: TX power insertion support - ath12k: BSS color change support - ath12k: statistics improvements - brcmfmac: Acer A1 840 tablet quirk - rtl8xxxu: 40 MHz connection fixes/support" * tag 'net-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1381 commits) net: page_pool: sanitise allocation order net: page pool: xa init with destroy on pp init net/mlx5e: Support XDP target xmit with dummy program net/mlx5e: Update XDP features in switch channels selftests/tc-testing: Test CAKE scheduler when enqueue drops packets net/sched: sch_cake: Fix incorrect qlen reduction in cake_drop wireguard: netlink: generate netlink code wireguard: uapi: generate header with ynl-gen wireguard: uapi: move flag enums wireguard: uapi: move enum wg_cmd wireguard: netlink: add YNL specification selftests: drv-net: Fix tolerance calculation in devlink_rate_tc_bw.py selftests: drv-net: Fix and clarify TC bandwidth split in devlink_rate_tc_bw.py selftests: drv-net: Set shell=True for sysfs writes in devlink_rate_tc_bw.py selftests: drv-net: Use Iperf3Runner in devlink_rate_tc_bw.py selftests: drv-net: introduce Iperf3Runner for measurement use cases selftests: drv-net: Add devlink_rate_tc_bw.py to TEST_PROGS net: ps3_gelic_net: Use napi_alloc_skb() and napi_gro_receive() Documentation: net: dsa: mention simple HSR offload helpers Documentation: net: dsa: mention availability of RedBox ...
2025-11-19usb: chipidea: ci_hdrc_imx: Set out of band wakeup for i.MX95Peng Fan1-0/+1
i.MX95 USB2 inside HSIOMIX could still wakeup Linux, even if HSIOMIX power domain(Digital logic) is off. There is still always on logic have the wakeup capability which is out band wakeup capbility. So use device_set_out_band_wakeup for i.MX95 to make sure usb2 could wakeup system even if HSIOMIX power domain is in off state. Tested-by: Xu Yang <xu.yang_2@nxp.com> Reviewed-by: Xu Yang <xu.yang_2@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Acked-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2025-11-11usbnet: Add support for Byte Queue Limits (BQL)Simon Schippers1-0/+2
In the current implementation, usbnet uses a fixed tx_qlen of: USB2: 60 * 1518 bytes = 91.08 KB USB3: 60 * 5 * 1518 bytes = 454.80 KB Such large transmit queues can be problematic, especially for cellular modems. For example, with a typical celluar link speed of 10 Mbit/s, a fully occupied USB3 transmit queue results in: 454.80 KB / (10 Mbit/s / 8 bit/byte) = 363.84 ms of additional latency. This patch adds support for Byte Queue Limits (BQL) [1] to dynamically manage the transmit queue size and reduce latency without sacrificing throughput. Testing was performed on various devices using the usbnet driver for packet transmission: - DELOCK 66045: USB3 to 2.5 GbE adapter (ax88179_178a) - DELOCK 61969: USB2 to 1 GbE adapter (asix) - Quectel RM520: 5G modem (qmi_wwan) - USB2 Android tethering (cdc_ncm) No performance degradation was observed for iperf3 TCP or UDP traffic, while latency for a prioritized ping application was significantly reduced. For example, using the USB3 to 2.5 GbE adapter, which was fully utilized by iperf3 UDP traffic, the prioritized ping was improved from 1.6 ms to 0.6 ms. With the same setup but with a 100 Mbit/s Ethernet connection, the prioritized ping was improved from 35 ms to 5 ms. [1] https://lwn.net/Articles/469652/ Signed-off-by: Simon Schippers <simon.schippers@tu-dortmund.de> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20251106175615.26948-1-simon.schippers@tu-dortmund.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-10-28usb: gadget: udc: fix use-after-free in usb_gadget_state_workJimmy Hu1-0/+5
A race condition during gadget teardown can lead to a use-after-free in usb_gadget_state_work(), as reported by KASAN: BUG: KASAN: invalid-access in sysfs_notify+0x2c/0xd0 Workqueue: events usb_gadget_state_work The fundamental race occurs because a concurrent event (e.g., an interrupt) can call usb_gadget_set_state() and schedule gadget->work at any time during the cleanup process in usb_del_gadget(). Commit 399a45e5237c ("usb: gadget: core: flush gadget workqueue after device removal") attempted to fix this by moving flush_work() to after device_del(). However, this does not fully solve the race, as a new work item can still be scheduled *after* flush_work() completes but before the gadget's memory is freed, leading to the same use-after-free. This patch fixes the race condition robustly by introducing a 'teardown' flag and a 'state_lock' spinlock to the usb_gadget struct. The flag is set during cleanup in usb_del_gadget() *before* calling flush_work() to prevent any new work from being scheduled once cleanup has commenced. The scheduling site, usb_gadget_set_state(), now checks this flag under the lock before queueing the work, thus safely closing the race window. Fixes: 5702f75375aa9 ("usb: gadget: udc-core: move sysfs_notify() to a workqueue") Cc: stable <stable@kernel.org> Signed-off-by: Jimmy Hu <hhhuuu@google.com> Link: https://patch.msgid.link/20251023054945.233861-1-hhhuuu@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-10-22usb: typec: ps883x: Add USB4 mode and TBT3 altmode supportKonrad Dybcio1-0/+1
This chip can do some more than the driver currently describes. Add support for configuring it for various flavors of TBT3/USB4 operation. Reviewed-by: Jack Pham <jack.pham@oss.qualcomm.com> Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://patch.msgid.link/20251014-topic-ps883x_usb4-v1-3-e6adb1a4296e@oss.qualcomm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-10-22tcpm: Parse and log AVS APDOBadhri Jagan Sridharan1-1/+68
The USB PD specification introduced new Adjustable Voltage Supply (AVS) types for both Standard Power Range (SPR) and Extended Power Range (EPR) sources. Add definitions to correctly parse and handle the new AVS APDO. Use bitfield macros to add inline helper functions to extract voltage, current, power, and peak current fields to parse and log the details of the new EPR AVS and SPR AVS APDO. Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> Reviewed-by: Amit Sunil Dhamne <amitsd@google.com> Reviewed-by: Kyle Tso <kyletso@google.com> Reviewed-by: RD Babiera <rdbabiera@google.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://patch.msgid.link/20251015043017.3382908-1-badhri@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-10-13usb: typec: class: add typec_get_data_role symbolRD Babiera2-0/+14
Alt Mode drivers are responsible for sending Enter Mode through the TCPM, but only a DFP is allowed to send Enter Mode. typec_get_data_role gets the port's data role, which can then be used in altmode drivers via typec_altmode_get_data_role to know if Enter Mode should be sent. Signed-off-by: RD Babiera <rdbabiera@google.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20250923181606.1583584-5-rdbabiera@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-10-05Merge tag 'usb-6.18-rc1' of ↵Linus Torvalds4-5/+252
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt updates from Greg KH: "Here is the big set of USB and thunderbolt drivers for 6.18-rc1. It was another normal development cycle, with lots of the usual drivers getting updates: - Thunderbolt driver cleanups and additions - dwc3 driver updates - dwc2 driver updates - typec driver updates - xhci driver updates and additions - offload USB engine updates for better power management - unused tracepoint removals - usb gadget fixes and updates as more users start to rely on these drivers instead of the "old" function gadget drivers - new USB device ids - other minor driver USB driver updates - new USB I/O driver framework and driver additions" The last item, the usb i/o driver, has an i2c and gpio driver added through this tree. Those drivers were acked by the respective subsystem maintainers. All of these have been in linux-next for a while" * tag 'usb-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (132 commits) usb: vhci-hcd: Prevent suspending virtually attached devices USB: serial: option: add SIMCom 8230C compositions thunderbolt: Fix use-after-free in tb_dp_dprx_work usb: xhci: align PORTSC trace with one-based port numbering usb: xhci: correct indentation for PORTSC tracing function usb: xhci: improve TR Dequeue Pointer mask usb: xhci-pci: add support for hosts with zero USB3 ports usb: xhci: Update a comment about Stop Endpoint retries Revert "usb: xhci: Avoid Stop Endpoint retry loop if the endpoint seems Running" usb: gadget: f_rndis: Refactor bind path to use __free() usb: gadget: f_ecm: Refactor bind path to use __free() usb: gadget: f_acm: Refactor bind path to use __free() usb: gadget: f_ncm: Refactor bind path to use __free() usb: gadget: Introduce free_usb_request helper usb: gadget: Store endpoint pointer in usb_request usb: host: xhci-rcar: Add Renesas RZ/G3E USB3 Host driver support usb: host: xhci-plat: Add .post_resume_quirk for struct xhci_plat_priv usb: host: xhci-rcar: Move R-Car reg definitions dt-bindings: usb: Document Renesas RZ/G3E USB3HOST usb: gadget: f_fs: Fix epfile null pointer access after ep enable. ...
2025-09-17Merge patch series "usb: gadget: Refactor function drivers to use __free() ↵Greg Kroah-Hartman1-0/+25
cleanup" Kuen-Han Tsai <khtsai@google.com> says: This patch series refactors the error-handling paths in the bind() function for f_ncm, f_acm, f_ecm, and f_rndis drivers. The current, unified goto logic in these drivers is vulnerable to a null pointer dereference. This is caused by the cleanup logic incorrectly handling the stale usb_request pointer after a bind/unbind cycle. This series fixes this issue by converting the drivers to use the modern __free() scope-based cleanup mechanism. Patches 1-2 are preparatory, adding the endpoint pointer to struct usb_request and defining helpers for the __free() cleanup. The remaining four patches use this new plumbing to refactor each driver. Future work ----------- 1. Refactor usb_ep_free_request(), usb_ep_queue(), and usb_ep_dequeue() functions as the ep parameter becomes redudant. 2. Convert the remaining gadget function drivers to use the new __free() cleanup mechanism. Link: https://lore.kernel.org/r/20250916-ready-v1-0-4997bf277548@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-09-17usb: gadget: Introduce free_usb_request helperKuen-Han Tsai1-0/+23
Introduce the free_usb_request() function that frees both the request's buffer and the request itself. This function serves as the cleanup callback for DEFINE_FREE() to enable automatic, scope-based cleanup for usb_request pointers. Signed-off-by: Kuen-Han Tsai <khtsai@google.com> Link: https://lore.kernel.org/r/20250916-ready-v1-2-4997bf277548@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20250916-ready-v1-2-4997bf277548@google.com
2025-09-17usb: gadget: Store endpoint pointer in usb_requestKuen-Han Tsai1-0/+2
Gadget function drivers often have goto-based error handling in their bind paths, which can be bug-prone. Refactoring these paths to use __free() scope-based cleanup is desirable, but currently blocked. The blocker is that usb_ep_free_request(ep, req) requires two parameters, while the __free() mechanism can only pass a pointer to the request itself. Store an endpoint pointer in the struct usb_request. The pointer is populated centrally in usb_ep_alloc_request() on every successful allocation, making the request object self-contained. Signed-off-by: Kuen-Han Tsai <khtsai@google.com> Link: https://lore.kernel.org/r/20250916-ready-v1-1-4997bf277548@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20250916-ready-v1-1-4997bf277548@google.com
2025-09-17usb: typec: Stub out typec_switch APIs when CONFIG_TYPEC=nStephen Boyd1-5/+41
Ease driver development by adding stubs for the typec_switch APIs when CONFIG_TYPEC=n. Copy the same method used for the typec_mux APIs to be consistent. Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Link: https://lore.kernel.org/r/20250916021620.1303995-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-09-13media: uvcvideo: Support UVC_CROSXU_CONTROL_IQ_PROFILERicardo Ribalda1-0/+5
The ChromeOS XU provides a control to change the IQ profile for a camera. It can be switched from VIVID (a.k.a. standard) to NONE (a.k.a. natural). Wire it up to the standard v4l2 control. Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Hans de Goede <hansg@kernel.org> Signed-off-by: Hans de Goede <hansg@kernel.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
2025-09-13media: uvcvideo: Move MSXU_CONTROL_METADATA definition to headerLaurent Pinchart1-0/+17
Move the MSXU_CONTROL_METADATA control definitino to the include/linux/usb/uvc.h header, alongside the corresponding XU GUID. Add a UVC_ prefix to avoid namespace clashes. While at it, add the definition for the other controls for that extension unit, as defined in https://learn.microsoft.com/en-us/windows-hardware/drivers/stream/uvc-extensions-1-5#222-extension-unit-controls. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Hans de Goede <hansg@kernel.org> Signed-off-by: Hans de Goede <hansg@kernel.org> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
2025-09-12Merge patch series "Support system sleep with offloaded usb transfers" into ↵Greg Kroah-Hartman1-0/+9
usb-next Guan-Yu Lin <guanyulin@google.com> says: Wesley Cheng and Mathias Nyman's USB offload design enables a co-processor to handle some USB transfers, potentially allowing the system to sleep (suspend-to-RAM) and save power. However, Linux's System Sleep model halts the USB host controller when the main system isn't managing any USB transfers. To address this, the proposal modifies the system to recognize offloaded USB transfers and manage power accordingly. This way, offloaded USB transfers could still happen during system sleep (Suspend-to-RAM). This involves two key steps: 1. Transfer Status Tracking: Propose offload_usage and corresponding apis drivers could track USB transfers on the co-processor, ensuring the system is aware of any ongoing activity. 2. Power Management Adjustment: Modifications to the USB driver stack (xhci host controller driver, and USB device drivers) allow the system to sleep (Suspend-to-RAM) without disrupting co-processor managed USB transfers. This involves adding conditional checks to bypass some power management operations in the System Sleep model. Link: https://lore.kernel.org/r/20250911142051.90822-1-guanyulin@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-09-12xhci: sideband: add api to trace sideband usageGuan-Yu Lin1-0/+9
The existing sideband driver only registers sidebands without tracking their active usage. To address this, sideband will now record its active usage when it creates/removes interrupters. In addition, a new api is introduced to provide a means for other dirvers to fetch sideband activity information on a USB host controller. Signed-off-by: Guan-Yu Lin <guanyulin@google.com> Link: https://lore.kernel.org/r/20250911142051.90822-4-guanyulin@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20250911142051.90822-4-guanyulin@google.com
2025-09-12usb: misc: Add Intel USBIO bridge driverIsrael Cepeda1-0/+177
Add a driver for the Intel USBIO USB IO-expander used by the MIPI cameras on various new (Meteor Lake and later) Intel laptops. This is an USB bridge driver which adds auxbus child devices for the GPIO, I2C and SPI functions of the USBIO chip and which exports IO-functions for the drivers for the auxbus child devices to communicate with the USBIO device's firmware. Co-developed-by: Hans de Goede <hansg@kernel.org> Signed-off-by: Hans de Goede <hansg@kernel.org> Signed-off-by: Israel Cepeda <israel.a.cepeda.lopez@intel.com> Link: https://lore.kernel.org/r/20250911181343.77398-2-hansg@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-07-31Merge tag 'media/v6.17-1' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - v4l2 core: - sub-device framework routing improvements - NV12M tiled variants added to v4l2_format_info - some fixes at control handler freeing logic - fixed H264 SEPARATE_COLOUR_PLANE check - new staging driver: Intel IPU7 PCI - Rockchip video decoder driver got promoted from staging - iris: added HEVC/VP9 encoder/decoder support - vsp1: driver has gained Renesas VSPX support - uvc: - switched to vb2 ioctl helpers - added MSXU 1.5 metadata support - atomisp: GC0310 sensor driver cleanups in preparation for moving it out of staging - Lots of cleanup, fixes and improvements * tag 'media/v6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (310 commits) media: rkvdec: Unstage the driver media: rkvdec: Remove TODO file media: dt-bindings: rockchip: Add RK3576 Video Decoder bindings media: dt-bindings: rockchip: Document RK3588 Video Decoder bindings media: amphion: Support dmabuf and v4l2 buffer without binding media: verisilicon: postproc: 4K support media: v4l2: Add support for NV12M tiled variants to v4l2_format_info() media: uvcvideo: Use a count variable for meta_formats instead of 0 terminating media: uvcvideo: Auto-set UVC_QUIRK_MSXU_META media: uvcvideo: Introduce V4L2_META_FMT_UVC_MSXU_1_5 media: uvcvideo: Introduce dev->meta_formats media: Documentation: Add note about UVCH length field media: uvcvideo: Do not mark valid metadata as invalid media: uvcvideo: uvc_v4l2_unlocked_ioctl: Invert PM logic media: core: export v4l2_translate_cmd media: uvcvideo: Turn on the camera if V4L2_EVENT_SUB_FL_SEND_INITIAL media: uvcvideo: Remove stream->is_streaming field media: uvcvideo: Split uvc_stop_streaming() media: uvcvideo: Handle locks in uvc_queue_return_buffers media: uvcvideo: Use vb2 ioctl and fop helpers ...
2025-07-30Merge tag 'net-next-6.17' of ↵Linus Torvalds2-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core & protocols: - Wrap datapath globals into net_aligned_data, to avoid false sharing - Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container) - Add SO_INQ and SCM_INQ support to AF_UNIX - Add SIOCINQ support to AF_VSOCK - Add TCP_MAXSEG sockopt to MPTCP - Add IPv6 force_forwarding sysctl to enable forwarding per interface - Make TCP validation of whether packet fully fits in the receive window and the rcv_buf more strict. With increased use of HW aggregation a single "packet" can be multiple 100s of kB - Add MSG_MORE flag to optimize large TCP transmissions via sockmap, improves latency up to 33% for sockmap users - Convert TCP send queue handling from tasklet to BH workque - Improve BPF iteration over TCP sockets to see each socket exactly once - Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code - Support enabling kernel threads for NAPI processing on per-NAPI instance basis rather than a whole device. Fully stop the kernel NAPI thread when threaded NAPI gets disabled. Previously thread would stick around until ifdown due to tricky synchronization - Allow multicast routing to take effect on locally-generated packets - Add output interface argument for End.X in segment routing - MCTP: add support for gateway routing, improve bind() handling - Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink - Add a new neighbor flag ("extern_valid"), which cedes refresh responsibilities to userspace. This is needed for EVPN multi-homing where a neighbor entry for a multi-homed host needs to be synced across all the VTEPs among which the host is multi-homed - Support NUD_PERMANENT for proxy neighbor entries - Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM - Add sequence numbers to netconsole messages. Unregister netconsole's console when all net targets are removed. Code refactoring. Add a number of selftests - Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol should be used for an inbound SA lookup - Support inspecting ref_tracker state via DebugFS - Don't force bonding advertisement frames tx to ~333 ms boundaries. Add broadcast_neighbor option to send ARP/ND on all bonded links - Allow providing upcall pid for the 'execute' command in openvswitch - Remove DCCP support from Netfilter's conntrack - Disallow multiple packet duplications in the queuing layer - Prevent use of deprecated iptables code on PREEMPT_RT Driver API: - Support RSS and hashing configuration over ethtool Netlink - Add dedicated ethtool callbacks for getting and setting hashing fields - Add support for power budget evaluation strategy in PSE / Power-over-Ethernet. Generate Netlink events for overcurrent etc - Support DPLL phase offset monitoring across all device inputs. Support providing clock reference and SYNC over separate DPLL inputs - Support traffic classes in devlink rate API for bandwidth management - Remove rtnl_lock dependency from UDP tunnel port configuration Device drivers: - Add a new Broadcom driver for 800G Ethernet (bnge) - Add a standalone driver for Microchip ZL3073x DPLL - Remove IBM's NETIUCV device driver - Ethernet high-speed NICs: - Broadcom (bnxt): - support zero-copy Tx of DMABUF memory - take page size into account for page pool recycling rings - Intel (100G, ice, idpf): - idpf: XDP and AF_XDP support preparations - idpf: add flow steering - add link_down_events statistic - clean up the TSPLL code - preparations for live VM migration - nVidia/Mellanox: - support zero-copy Rx/Tx interfaces (DMABUF and io_uring) - optimize context memory usage for matchers - expose serial numbers in devlink info - support PCIe congestion metrics - Meta (fbnic): - add 25G, 50G, and 100G link modes to phylink - support dumping FW logs - Marvell/Cavium: - support for CN20K generation of the Octeon chips - Amazon: - add HW clock (without timestamping, just hypervisor time access) - Ethernet virtual: - VirtIO net: - support segmentation of UDP-tunnel-encapsulated packets - Google (gve): - support packet timestamping and clock synchronization - Microsoft vNIC: - add handler for device-originated servicing events - allow dynamic MSI-X vector allocation - support Tx bandwidth clamping - Ethernet NICs consumer, and embedded: - AMD: - amd-xgbe: hardware timestamping and PTP clock support - Broadcom integrated MACs (bcmgenet, bcmasp): - use napi_complete_done() return value to support NAPI polling - add support for re-starting auto-negotiation - Broadcom switches (b53): - support BCM5325 switches - add bcm63xx EPHY power control - Synopsys (stmmac): - lots of code refactoring and cleanups - TI: - icssg-prueth: read firmware-names from device tree - icssg: PRP offload support - Microchip: - lan78xx: convert to PHYLINK for improved PHY and MAC management - ksz: add KSZ8463 switch support - Intel: - support similar queue priority scheme in multi-queue and time-sensitive networking (taprio) - support packet pre-emption in both - RealTek (r8169): - enable EEE at 5Gbps on RTL8126 - Airoha: - add PPPoE offload support - MDIO bus controller for Airoha AN7583 - Ethernet PHYs: - support for the IPQ5018 internal GE PHY - micrel KSZ9477 switch-integrated PHYs: - add MDI/MDI-X control support - add RX error counters - add cable test support - add Signal Quality Indicator (SQI) reporting - dp83tg720: improve reset handling and reduce link recovery time - support bcm54811 (and its MII-Lite interface type) - air_en8811h: support resume/suspend - support PHY counters for QCA807x and QCA808x - support WoL for QCA807x - CAN drivers: - rcar_canfd: support for Transceiver Delay Compensation - kvaser: report FW versions via devlink dev info - WiFi: - extended regulatory info support (6 GHz) - add statistics and beacon monitor for Multi-Link Operation (MLO) - support S1G aggregation, improve S1G support - add Radio Measurement action fields - support per-radio RTS threshold - some work around how FIPS affects wifi, which was wrong (RC4 is used by TKIP, not only WEP) - improvements for unsolicited probe response handling - WiFi drivers: - RealTek (rtw88): - IBSS mode for SDIO devices - RealTek (rtw89): - BT coexistence for MLO/WiFi7 - concurrent station + P2P support - support for USB devices RTL8851BU/RTL8852BU - Intel (iwlwifi): - use embedded PNVM in (to be released) FW images to fix compatibility issues - many cleanups (unused FW APIs, PCIe code, WoWLAN) - some FIPS interoperability - MediaTek (mt76): - firmware recovery improvements - more MLO work - Qualcomm/Atheros (ath12k): - fix scan on multi-radio devices - more EHT/Wi-Fi 7 features - encapsulation/decapsulation offload - Broadcom (brcm80211): - support SDIO 43751 device - Bluetooth: - hci_event: add support for handling LE BIG Sync Lost event - ISO: add socket option to report packet seqnum via CMSG - ISO: support SCM_TIMESTAMPING for ISO TS - Bluetooth drivers: - intel_pcie: support Function Level Reset - nxpuart: add support for 4M baudrate - nxpuart: implement powerup sequence, reset, FW dump, and FW loading" * tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits) dpll: zl3073x: Fix build failure selftests: bpf: fix legacy netfilter options ipv6: annotate data-races around rt->fib6_nsiblings ipv6: fix possible infinite loop in fib6_info_uses_dev() ipv6: prevent infinite loop in rt6_nlmsg_size() ipv6: add a retry logic in net6_rt_notify() vrf: Drop existing dst reference in vrf_ip6_input_dst net/sched: taprio: align entry index attr validation with mqprio net: fsl_pq_mdio: use dev_err_probe selftests: rtnetlink.sh: remove esp4_offload after test vsock: remove unnecessary null check in vsock_getname() igb: xsk: solve negative overflow of nb_pkts in zerocopy mode stmmac: xsk: fix negative overflow of budget in zerocopy mode dt-bindings: ieee802154: Convert at86rf230.txt yaml format net: dsa: microchip: Disable PTP function of KSZ8463 net: dsa: microchip: Setup fiber ports for KSZ8463 net: dsa: microchip: Write switch MAC address differently for KSZ8463 net: dsa: microchip: Use different registers for KSZ8463 net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver dt-bindings: net: dsa: microchip: Add KSZ8463 switch support ...
2025-07-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-0/+1
Merge in late fixes to prepare for the 6.17 net-next PR. Conflicts: net/core/neighbour.c 1bbb76a89948 ("neighbour: Fix null-ptr-deref in neigh_flush_dev().") 13a936bb99fb ("neighbour: Protect tbl->phash_buckets[] with a dedicated mutex.") 03dc03fa0432 ("neighbor: Add NTF_EXT_VALIDATED flag for externally validated entries") Adjacent changes: drivers/net/usb/usbnet.c 0d9cfc9b8cb1 ("net: usbnet: Avoid potential RCU stall on LINK_CHANGE event") 2c04d279e857 ("net: usb: Convert tasklet API to new bottom half workqueue mechanism") net/ipv6/route.c 31d7d67ba127 ("ipv6: annotate data-races around rt->fib6_nsiblings") 1caf27297215 ("ipv6: adopt dst_dev() helper") 3b3ccf9ed05e ("net: Remove unnecessary NULL check for lwtunnel_fill_encap()") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-25net: usbnet: Avoid potential RCU stall on LINK_CHANGE eventJohn Ernberg1-0/+1
The Gemalto Cinterion PLS83-W modem (cdc_ether) is emitting confusing link up and down events when the WWAN interface is activated on the modem-side. Interrupt URBs will in consecutive polls grab: * Link Connected * Link Disconnected * Link Connected Where the last Connected is then a stable link state. When the system is under load this may cause the unlink_urbs() work in __handle_link_change() to not complete before the next usbnet_link_change() call turns the carrier on again, allowing rx_submit() to queue new SKBs. In that event the URB queue is filled faster than it can drain, ending up in a RCU stall: rcu: INFO: rcu_sched detected expedited stalls on CPUs/tasks: { 0-.... } 33108 jiffies s: 201 root: 0x1/. rcu: blocking rcu_node structures (internal RCU debug): Sending NMI from CPU 1 to CPUs 0: NMI backtrace for cpu 0 Call trace: arch_local_irq_enable+0x4/0x8 local_bh_enable+0x18/0x20 __netdev_alloc_skb+0x18c/0x1cc rx_submit+0x68/0x1f8 [usbnet] rx_alloc_submit+0x4c/0x74 [usbnet] usbnet_bh+0x1d8/0x218 [usbnet] usbnet_bh_tasklet+0x10/0x18 [usbnet] tasklet_action_common+0xa8/0x110 tasklet_action+0x2c/0x34 handle_softirqs+0x2cc/0x3a0 __do_softirq+0x10/0x18 ____do_softirq+0xc/0x14 call_on_irq_stack+0x24/0x34 do_softirq_own_stack+0x18/0x20 __irq_exit_rcu+0xa8/0xb8 irq_exit_rcu+0xc/0x30 el1_interrupt+0x34/0x48 el1h_64_irq_handler+0x14/0x1c el1h_64_irq+0x68/0x6c _raw_spin_unlock_irqrestore+0x38/0x48 xhci_urb_dequeue+0x1ac/0x45c [xhci_hcd] unlink1+0xd4/0xdc [usbcore] usb_hcd_unlink_urb+0x70/0xb0 [usbcore] usb_unlink_urb+0x24/0x44 [usbcore] unlink_urbs.constprop.0.isra.0+0x64/0xa8 [usbnet] __handle_link_change+0x34/0x70 [usbnet] usbnet_deferred_kevent+0x1c0/0x320 [usbnet] process_scheduled_works+0x2d0/0x48c worker_thread+0x150/0x1dc kthread+0xd8/0xe8 ret_from_fork+0x10/0x20 Get around the problem by delaying the carrier on to the scheduled work. This needs a new flag to keep track of the necessary action. The carrier ok check cannot be removed as it remains required for the LINK_RESET event flow. Fixes: 4b49f58fff00 ("usbnet: handle link change") Cc: stable@vger.kernel.org Signed-off-by: John Ernberg <john.ernberg@actia.se> Link: https://patch.msgid.link/20250723102526.1305339-1-john.ernberg@actia.se Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-22net: usb: cdc-ncm: check for filtering capabilityOliver Neukum1-0/+1
If the decice does not support filtering, filtering must not be used and all packets delivered for the upper layers to sort. Signed-off-by: Oliver Neukum <oneukum@suse.com> Link: https://patch.msgid.link/20250717120649.2090929-1-oneukum@suse.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-11media: uvcvideo: Auto-set UVC_QUIRK_MSXU_METARicardo Ribalda1-0/+3
If the camera supports the MSXU_CONTROL_METADATA control, auto set the MSXU_META quirk. Reviewed-by: Hans de Goede <hansg@kernel.org> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Link: https://lore.kernel.org/r/20250707-uvc-meta-v8-5-ed17f8b1218b@chromium.org Signed-off-by: Hans de Goede <hansg@kernel.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-07-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-0/+1
Cross-merge networking fixes after downstream PR (net-6.16-rc6). No conflicts. Adjacent changes: Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml 0a12c435a1d6 ("dt-bindings: net: sun8i-emac: Add A100 EMAC compatible") b3603c0466a8 ("dt-bindings: net: sun8i-emac: Rename A523 EMAC0 to GMAC0") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-05Merge merge point of tag 'usb-6.16-rc5' into usb-nextGreg Kroah-Hartman1-0/+1
We need the USB fixes in here as well to build on top of for other changes that depend on them. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-24usb: typec: altmodes/displayport: do not index invalid pin_assignmentsRD Babiera1-0/+1
A poorly implemented DisplayPort Alt Mode port partner can indicate that its pin assignment capabilities are greater than the maximum value, DP_PIN_ASSIGN_F. In this case, calls to pin_assignment_show will cause a BRK exception due to an out of bounds array access. Prevent for loop in pin_assignment_show from accessing invalid values in pin_assignments by adding DP_PIN_ASSIGN_MAX value in typec_dp.h and using i < DP_PIN_ASSIGN_MAX as a loop condition. Fixes: 0e3bb7d6894d ("usb: typec: Add driver for DisplayPort alternate mode") Cc: stable <stable@kernel.org> Signed-off-by: RD Babiera <rdbabiera@google.com> Reviewed-by: Badhri Jagan Sridharan <badhri@google.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20250618224943.3263103-2-rdbabiera@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-20net: usb: Convert tasklet API to new bottom half workqueue mechanismJun Miao1-1/+1
Migrate tasklet APIs to the new bottom half workqueue mechanism. It replaces all occurrences of tasklet usage with the appropriate workqueue APIs throughout the usbnet driver. This transition ensures compatibility with the latest design and enhances performance. Signed-off-by: Jun Miao <jun.miao@intel.com> Link: https://patch.msgid.link/20250618173923.950510-1-jun.miao@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19usb: chipidea: udc: add CI_HDRC_CONTROLLER_PULLUP_EVENT eventXu Yang1-0/+1
The device controller will send CI_HDRC_CONTROLLER_PULLUP_EVENT event when it's going to pullup or pulldown data line. Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Acked-by: Peter Chen <peter.chen@kernel.org> Link: https://lore.kernel.org/r/20250614125645.207732-2-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-02-26 17:11:58 +0300