| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver updates for
6.19-rc1. Nothing major here, just lots of tiny updates for most of
the common USB drivers. Included in here are:
- more xhci driver updates and fixes
- Thunderbolt driver cleanups
- usb serial driver updates
- typec driver updates
- USB tracepoint additions
- dwc3 driver updates, including support for Apple hardware
- lots of other smaller driver updates and cleanups
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (161 commits)
usb: gadget: tegra-xudc: Always reinitialize data toggle when clear halt
USB: serial: option: move Telit 0x10c7 composition in the right place
USB: serial: option: add Telit Cinterion FE910C04 new compositions
usb: typec: ucsi: fix use-after-free caused by uec->work
usb: typec: ucsi: fix probe failure in gaokun_ucsi_probe()
usb: dwc3: core: Remove redundant comment in core init
usb: phy: Initialize struct usb_phy list_head
USB: serial: option: add Foxconn T99W760
usb: usb-storage: No additional quirks need to be added to the EL-R12 optical drive.
usb: typec: hd3ss3220: Enable VBUS based on ID pin state
dt-bindings: usb: ti,hd3ss3220: Add support for VBUS based on ID state
usb: typec: anx7411: add WQ_PERCPU to alloc_workqueue users
USB: add WQ_PERCPU to alloc_workqueue users
dt-bindings: usb: dwc3-xilinx: Describe the reset constraint for the versal platform
drivers/usb/storage: use min() instead of min_t()
usb: raw-gadget: cap raw_io transfer length to KMALLOC_MAX_SIZE
usb: ohci-da8xx: remove unused platform data
usb: gadget: functionfs: use dma_buf_unmap_attachment_unlocked() helper
usb: uas: reduce time under spinlock
usb: dwc3: eic7700: Add EIC7700 USB driver
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain updates from Ulf Hansson:
"pmdomain core:
- Allow power-off for out-of-band wakeup-capable devices
- Drop the redundant call to dev_pm_domain_detach() for the amba bus
- Extend the genpd governor for CPUs to account for IPIs
pmdomain providers:
- bcm: Add support for BCM2712
- mediatek: Add support for MFlexGraphics power domains
- mediatek: Add support for MT8196 power domains
- qcom: Add RPMh power domain support for Kaanapali
- rockchip: Add support for RV1126B
pmdomain consumers:
- usb: dwc3: Enable out of band wakeup for i.MX95
- usb: chipidea: Enable out of band wakeup for i.MX95"
* tag 'pmdomain-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (26 commits)
pmdomain: Extend the genpd governor for CPUs to account for IPIs
smp: Introduce a helper function to check for pending IPIs
pmdomain: mediatek: convert from clk round_rate() to determine_rate()
amba: bus: Drop dev_pm_domain_detach() call
pmdomain: bcm: bcm2835-power: Prepare to support BCM2712
pmdomain: mediatek: mtk-mfg: select MAILBOX in Kconfig
pmdomain: mediatek: Add support for MFlexGraphics
pmdomain: mediatek: Fix build-errors
cpuidle: psci: Replace deprecated strcpy in psci_idle_init_cpu
pmdomain: rockchip: Add support for RV1126B
pmdomain: mediatek: Add support for MT8196 HFRPSYS power domains
pmdomain: mediatek: Add support for MT8196 SCPSYS power domains
pmdomain: mediatek: Add support for secure HWCCF infra power on
pmdomain: mediatek: Add support for Hardware Voter power domains
pmdomain: qcom: rpmhpd: Add RPMh power domain support for Kaanapali
usb: dwc3: imx8mp: Set out of band wakeup for i.MX95
usb: chipidea: ci_hdrc_imx: Set out of band wakeup for i.MX95
usb: chipidea: core: detach power domain for ci_hdrc platform device
pmdomain: core: Allow power-off for out-of-band wakeup-capable devices
PM: wakeup: Add out-of-band system wakeup support for devices
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Replace busylock at the Tx queuing layer with a lockless list.
Resulting in a 300% (4x) improvement on heavy TX workloads, sending
twice the number of packets per second, for half the cpu cycles.
- Allow constantly busy flows to migrate to a more suitable CPU/NIC
queue.
Normally we perform queue re-selection when flow comes out of idle,
but under extreme circumstances the flows may be constantly busy.
Add sysctl to allow periodic rehashing even if it'd risk packet
reordering.
- Optimize the NAPI skb cache, make it larger, use it in more paths.
- Attempt returning Tx skbs to the originating CPU (like we already
did for Rx skbs).
- Various data structure layout and prefetch optimizations from Eric.
- Remove ktime_get() from the recvmsg() fast path, ktime_get() is
sadly quite expensive on recent AMD machines.
- Extend threaded NAPI polling to allow the kthread busy poll for
packets.
- Make MPTCP use Rx backlog processing. This lowers the lock
pressure, improving the Rx performance.
- Support memcg accounting of MPTCP socket memory.
- Allow admin to opt sockets out of global protocol memory accounting
(using a sysctl or BPF-based policy). The global limits are a poor
fit for modern container workloads, where limits are imposed using
cgroups.
- Improve heuristics for when to kick off AF_UNIX garbage collection.
- Allow users to control TCP SACK compression, and default to 33% of
RTT.
- Add tcp_rcvbuf_low_rtt sysctl to let datacenter users avoid
unnecessarily aggressive rcvbuf growth and overshot when the
connection RTT is low.
- Preserve skb metadata space across skb_push / skb_pull operations.
- Support for IPIP encapsulation in the nftables flowtable offload.
- Support appending IP interface information to ICMP messages (RFC
5837).
- Support setting max record size in TLS (RFC 8449).
- Remove taking rtnl_lock from RTM_GETNEIGHTBL and RTM_SETNEIGHTBL.
- Use a dedicated lock (and RCU) in MPLS, instead of rtnl_lock.
- Let users configure the number of write buffers in SMC.
- Add new struct sockaddr_unsized for sockaddr of unknown length,
from Kees.
- Some conversions away from the crypto_ahash API, from Eric Biggers.
- Some preparations for slimming down struct page.
- YAML Netlink protocol spec for WireGuard.
- Add a tool on top of YAML Netlink specs/lib for reporting commonly
computed derived statistics and summarized system state.
Driver API:
- Add CAN XL support to the CAN Netlink interface.
- Add uAPI for reporting PHY Mean Square Error (MSE) diagnostics, as
defined by the OPEN Alliance's "Advanced diagnostic features for
100BASE-T1 automotive Ethernet PHYs" specification.
- Add DPLL phase-adjust-gran pin attribute (and implement it in
zl3073x).
- Refactor xfrm_input lock to reduce contention when NIC offloads
IPsec and performs RSS.
- Add info to devlink params whether the current setting is the
default or a user override. Allow resetting back to default.
- Add standard device stats for PSP crypto offload.
- Leverage DSA frame broadcast to implement simple HSR frame
duplication for a lot of switches without dedicated HSR offload.
- Add uAPI defines for 1.6Tbps link modes.
Device drivers:
- Add Motorcomm YT921x gigabit Ethernet switch support.
- Add MUCSE driver for N500/N210 1GbE NIC series.
- Convert drivers to support dedicated ops for timestamping control,
and away from the direct IOCTL handling. While at it support GET
operations for PHY timestamping.
- Add (and convert most drivers to) a dedicated ethtool callback for
reading the Rx ring count.
- Significant refactoring efforts in the STMMAC driver, which
supports Synopsys turn-key MAC IP integrated into a ton of SoCs.
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support PPS in/out on all pins
- Intel (100G, ice, idpf):
- ice: implement standard ethtool and timestamping stats
- i40e: support setting the max number of MAC addresses per VF
- iavf: support RSS of GTP tunnels for 5G and LTE deployments
- nVidia/Mellanox (mlx5):
- reduce downtime on interface reconfiguration
- disable being an XDP redirect target by default (same as
other drivers) to avoid wasting resources if feature is
unused
- Meta (fbnic):
- add support for Linux-managed PCS on 25G, 50G, and 100G links
- Wangxun:
- support Rx descriptor merge, and Tx head writeback
- support Rx coalescing offload
- support 25G SPF and 40G QSFP modules
- Ethernet virtual:
- Google (gve):
- allow ethtool to configure rx_buf_len
- implement XDP HW RX Timestamping support for DQ descriptor
format
- Microsoft vNIC (mana):
- support HW link state events
- handle hardware recovery events when probing the device
- Ethernet NICs consumer, and embedded:
- usbnet: add support for Byte Queue Limits (BQL)
- AMD (amd-xgbe):
- add device selftests
- NXP (enetc):
- add i.MX94 support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- bcmasp: add support for PHY-based Wake-on-LAN
- Broadcom switches (b53):
- support port isolation
- support BCM5389/97/98 and BCM63XX ARL formats
- Lantiq/MaxLinear switches:
- support bridge FDB entries on the CPU port
- use regmap for register access
- allow user to enable/disable learning
- support Energy Efficient Ethernet
- support configuring RMII clock delays
- add tagging driver for MaxLinear GSW1xx switches
- Synopsys (stmmac):
- support using the HW clock in free running mode
- add Eswin EIC7700 support
- add Rockchip RK3506 support
- add Altera Agilex5 support
- Cadence (macb):
- cleanup and consolidate descriptor and DMA address handling
- add EyeQ5 support
- TI:
- icssg-prueth: support AF_XDP
- Airoha access points:
- add missing Ethernet stats and link state callback
- add AN7583 support
- support out-of-order Tx completion processing
- Power over Ethernet:
- pd692x0: preserve PSE configuration across reboots
- add support for TPS23881B devices
- Ethernet PHYs:
- Open Alliance OATC14 10BASE-T1S PHY cable diagnostic support
- Support 50G SerDes and 100G interfaces in Linux-managed PHYs
- micrel:
- support for non PTP SKUs of lan8814
- enable in-band auto-negotiation on lan8814
- realtek:
- cable testing support on RTL8224
- interrupt support on RTL8221B
- motorcomm: support for PHY LEDs on YT853
- microchip: support for LAN867X Rev.D0 PHYs w/ SQI and cable diag
- mscc: support for PHY LED control
- CAN drivers:
- m_can: add support for optional reset and system wake up
- remove can_change_mtu() obsoleted by core handling
- mcp251xfd: support GPIO controller functionality
- Bluetooth:
- add initial support for PASTa
- WiFi:
- split ieee80211.h file, it's way too big
- improvements in VHT radiotap reporting, S1G, Channel Switch
Announcement handling, rate tracking in mesh networks
- improve multi-radio monitor mode support, and add a cfg80211
debugfs interface for it
- HT action frame handling on 6 GHz
- initial chanctx work towards NAN
- MU-MIMO sniffer improvements
- WiFi drivers:
- RealTek (rtw89):
- support USB devices RTL8852AU and RTL8852CU
- initial work for RTL8922DE
- improved injection support
- Intel:
- iwlwifi: new sniffer API support
- MediaTek (mt76):
- WED support for >32-bit DMA
- airoha NPU support
- regdomain improvements
- continued WiFi7/MLO work
- Qualcomm/Atheros:
- ath10k: factory test support
- ath11k: TX power insertion support
- ath12k: BSS color change support
- ath12k: statistics improvements
- brcmfmac: Acer A1 840 tablet quirk
- rtl8xxxu: 40 MHz connection fixes/support"
* tag 'net-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1381 commits)
net: page_pool: sanitise allocation order
net: page pool: xa init with destroy on pp init
net/mlx5e: Support XDP target xmit with dummy program
net/mlx5e: Update XDP features in switch channels
selftests/tc-testing: Test CAKE scheduler when enqueue drops packets
net/sched: sch_cake: Fix incorrect qlen reduction in cake_drop
wireguard: netlink: generate netlink code
wireguard: uapi: generate header with ynl-gen
wireguard: uapi: move flag enums
wireguard: uapi: move enum wg_cmd
wireguard: netlink: add YNL specification
selftests: drv-net: Fix tolerance calculation in devlink_rate_tc_bw.py
selftests: drv-net: Fix and clarify TC bandwidth split in devlink_rate_tc_bw.py
selftests: drv-net: Set shell=True for sysfs writes in devlink_rate_tc_bw.py
selftests: drv-net: Use Iperf3Runner in devlink_rate_tc_bw.py
selftests: drv-net: introduce Iperf3Runner for measurement use cases
selftests: drv-net: Add devlink_rate_tc_bw.py to TEST_PROGS
net: ps3_gelic_net: Use napi_alloc_skb() and napi_gro_receive()
Documentation: net: dsa: mention simple HSR offload helpers
Documentation: net: dsa: mention availability of RedBox
...
|
|
i.MX95 USB2 inside HSIOMIX could still wakeup Linux, even if HSIOMIX
power domain(Digital logic) is off. There is still always on logic
have the wakeup capability which is out band wakeup capbility.
So use device_set_out_band_wakeup for i.MX95 to make sure usb2 could
wakeup system even if HSIOMIX power domain is in off state.
Tested-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Xu Yang <xu.yang_2@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
In the current implementation, usbnet uses a fixed tx_qlen of:
USB2: 60 * 1518 bytes = 91.08 KB
USB3: 60 * 5 * 1518 bytes = 454.80 KB
Such large transmit queues can be problematic, especially for cellular
modems. For example, with a typical celluar link speed of 10 Mbit/s, a
fully occupied USB3 transmit queue results in:
454.80 KB / (10 Mbit/s / 8 bit/byte) = 363.84 ms
of additional latency.
This patch adds support for Byte Queue Limits (BQL) [1] to dynamically
manage the transmit queue size and reduce latency without sacrificing
throughput.
Testing was performed on various devices using the usbnet driver for
packet transmission:
- DELOCK 66045: USB3 to 2.5 GbE adapter (ax88179_178a)
- DELOCK 61969: USB2 to 1 GbE adapter (asix)
- Quectel RM520: 5G modem (qmi_wwan)
- USB2 Android tethering (cdc_ncm)
No performance degradation was observed for iperf3 TCP or UDP traffic,
while latency for a prioritized ping application was significantly
reduced. For example, using the USB3 to 2.5 GbE adapter, which was fully
utilized by iperf3 UDP traffic, the prioritized ping was improved from
1.6 ms to 0.6 ms. With the same setup but with a 100 Mbit/s Ethernet
connection, the prioritized ping was improved from 35 ms to 5 ms.
[1] https://lwn.net/Articles/469652/
Signed-off-by: Simon Schippers <simon.schippers@tu-dortmund.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20251106175615.26948-1-simon.schippers@tu-dortmund.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A race condition during gadget teardown can lead to a use-after-free
in usb_gadget_state_work(), as reported by KASAN:
BUG: KASAN: invalid-access in sysfs_notify+0x2c/0xd0
Workqueue: events usb_gadget_state_work
The fundamental race occurs because a concurrent event (e.g., an
interrupt) can call usb_gadget_set_state() and schedule gadget->work
at any time during the cleanup process in usb_del_gadget().
Commit 399a45e5237c ("usb: gadget: core: flush gadget workqueue after
device removal") attempted to fix this by moving flush_work() to after
device_del(). However, this does not fully solve the race, as a new
work item can still be scheduled *after* flush_work() completes but
before the gadget's memory is freed, leading to the same use-after-free.
This patch fixes the race condition robustly by introducing a 'teardown'
flag and a 'state_lock' spinlock to the usb_gadget struct. The flag is
set during cleanup in usb_del_gadget() *before* calling flush_work() to
prevent any new work from being scheduled once cleanup has commenced.
The scheduling site, usb_gadget_set_state(), now checks this flag under
the lock before queueing the work, thus safely closing the race window.
Fixes: 5702f75375aa9 ("usb: gadget: udc-core: move sysfs_notify() to a workqueue")
Cc: stable <stable@kernel.org>
Signed-off-by: Jimmy Hu <hhhuuu@google.com>
Link: https://patch.msgid.link/20251023054945.233861-1-hhhuuu@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This chip can do some more than the driver currently describes. Add
support for configuring it for various flavors of TBT3/USB4 operation.
Reviewed-by: Jack Pham <jack.pham@oss.qualcomm.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20251014-topic-ps883x_usb4-v1-3-e6adb1a4296e@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The USB PD specification introduced new Adjustable Voltage Supply (AVS)
types for both Standard Power Range (SPR) and Extended Power Range (EPR)
sources.
Add definitions to correctly parse and handle the new AVS APDO. Use
bitfield macros to add inline helper functions to extract voltage,
current, power, and peak current fields to parse and log the details
of the new EPR AVS and SPR AVS APDO.
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Reviewed-by: Amit Sunil Dhamne <amitsd@google.com>
Reviewed-by: Kyle Tso <kyletso@google.com>
Reviewed-by: RD Babiera <rdbabiera@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20251015043017.3382908-1-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Alt Mode drivers are responsible for sending Enter Mode through the TCPM,
but only a DFP is allowed to send Enter Mode. typec_get_data_role gets
the port's data role, which can then be used in altmode drivers via
typec_altmode_get_data_role to know if Enter Mode should be sent.
Signed-off-by: RD Babiera <rdbabiera@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20250923181606.1583584-5-rdbabiera@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and thunderbolt drivers for 6.18-rc1. It
was another normal development cycle, with lots of the usual drivers
getting updates:
- Thunderbolt driver cleanups and additions
- dwc3 driver updates
- dwc2 driver updates
- typec driver updates
- xhci driver updates and additions
- offload USB engine updates for better power management
- unused tracepoint removals
- usb gadget fixes and updates as more users start to rely on these
drivers instead of the "old" function gadget drivers
- new USB device ids
- other minor driver USB driver updates
- new USB I/O driver framework and driver additions"
The last item, the usb i/o driver, has an i2c and gpio driver added
through this tree. Those drivers were acked by the respective
subsystem maintainers.
All of these have been in linux-next for a while"
* tag 'usb-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (132 commits)
usb: vhci-hcd: Prevent suspending virtually attached devices
USB: serial: option: add SIMCom 8230C compositions
thunderbolt: Fix use-after-free in tb_dp_dprx_work
usb: xhci: align PORTSC trace with one-based port numbering
usb: xhci: correct indentation for PORTSC tracing function
usb: xhci: improve TR Dequeue Pointer mask
usb: xhci-pci: add support for hosts with zero USB3 ports
usb: xhci: Update a comment about Stop Endpoint retries
Revert "usb: xhci: Avoid Stop Endpoint retry loop if the endpoint seems Running"
usb: gadget: f_rndis: Refactor bind path to use __free()
usb: gadget: f_ecm: Refactor bind path to use __free()
usb: gadget: f_acm: Refactor bind path to use __free()
usb: gadget: f_ncm: Refactor bind path to use __free()
usb: gadget: Introduce free_usb_request helper
usb: gadget: Store endpoint pointer in usb_request
usb: host: xhci-rcar: Add Renesas RZ/G3E USB3 Host driver support
usb: host: xhci-plat: Add .post_resume_quirk for struct xhci_plat_priv
usb: host: xhci-rcar: Move R-Car reg definitions
dt-bindings: usb: Document Renesas RZ/G3E USB3HOST
usb: gadget: f_fs: Fix epfile null pointer access after ep enable.
...
|
|
cleanup"
Kuen-Han Tsai <khtsai@google.com> says:
This patch series refactors the error-handling paths in the bind()
function for f_ncm, f_acm, f_ecm, and f_rndis drivers.
The current, unified goto logic in these drivers is vulnerable to a null
pointer dereference. This is caused by the cleanup logic incorrectly
handling the stale usb_request pointer after a bind/unbind cycle. This
series fixes this issue by converting the drivers to use the modern
__free() scope-based cleanup mechanism.
Patches 1-2 are preparatory, adding the endpoint pointer to struct
usb_request and defining helpers for the __free() cleanup. The remaining
four patches use this new plumbing to refactor each driver.
Future work
-----------
1. Refactor usb_ep_free_request(), usb_ep_queue(), and usb_ep_dequeue()
functions as the ep parameter becomes redudant.
2. Convert the remaining gadget function drivers to use the new __free()
cleanup mechanism.
Link: https://lore.kernel.org/r/20250916-ready-v1-0-4997bf277548@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Introduce the free_usb_request() function that frees both the request's
buffer and the request itself.
This function serves as the cleanup callback for DEFINE_FREE() to enable
automatic, scope-based cleanup for usb_request pointers.
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://lore.kernel.org/r/20250916-ready-v1-2-4997bf277548@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250916-ready-v1-2-4997bf277548@google.com
|
|
Gadget function drivers often have goto-based error handling in their
bind paths, which can be bug-prone. Refactoring these paths to use
__free() scope-based cleanup is desirable, but currently blocked.
The blocker is that usb_ep_free_request(ep, req) requires two
parameters, while the __free() mechanism can only pass a pointer to the
request itself.
Store an endpoint pointer in the struct usb_request. The pointer is
populated centrally in usb_ep_alloc_request() on every successful
allocation, making the request object self-contained.
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://lore.kernel.org/r/20250916-ready-v1-1-4997bf277548@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250916-ready-v1-1-4997bf277548@google.com
|
|
Ease driver development by adding stubs for the typec_switch APIs when
CONFIG_TYPEC=n. Copy the same method used for the typec_mux APIs to be
consistent.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20250916021620.1303995-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The ChromeOS XU provides a control to change the IQ profile for a camera.
It can be switched from VIVID (a.k.a. standard) to NONE (a.k.a. natural).
Wire it up to the standard v4l2 control.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Move the MSXU_CONTROL_METADATA control definitino to the
include/linux/usb/uvc.h header, alongside the corresponding XU GUID. Add
a UVC_ prefix to avoid namespace clashes.
While at it, add the definition for the other controls for that
extension unit, as defined in
https://learn.microsoft.com/en-us/windows-hardware/drivers/stream/uvc-extensions-1-5#222-extension-unit-controls.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
usb-next
Guan-Yu Lin <guanyulin@google.com> says:
Wesley Cheng and Mathias Nyman's USB offload design enables a
co-processor to handle some USB transfers, potentially allowing the
system to sleep (suspend-to-RAM) and save power. However, Linux's System
Sleep model halts the USB host controller when the main system isn't
managing any USB transfers. To address this, the proposal modifies the
system to recognize offloaded USB transfers and manage power
accordingly. This way, offloaded USB transfers could still happen during
system sleep (Suspend-to-RAM).
This involves two key steps:
1. Transfer Status Tracking: Propose offload_usage and corresponding
apis drivers could track USB transfers on the co-processor, ensuring
the system is aware of any ongoing activity.
2. Power Management Adjustment: Modifications to the USB driver stack
(xhci host controller driver, and USB device drivers) allow the
system to sleep (Suspend-to-RAM) without disrupting co-processor
managed USB transfers. This involves adding conditional checks to
bypass some power management operations in the System Sleep model.
Link: https://lore.kernel.org/r/20250911142051.90822-1-guanyulin@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The existing sideband driver only registers sidebands without tracking
their active usage. To address this, sideband will now record its active
usage when it creates/removes interrupters. In addition, a new api is
introduced to provide a means for other dirvers to fetch sideband
activity information on a USB host controller.
Signed-off-by: Guan-Yu Lin <guanyulin@google.com>
Link: https://lore.kernel.org/r/20250911142051.90822-4-guanyulin@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250911142051.90822-4-guanyulin@google.com
|
|
Add a driver for the Intel USBIO USB IO-expander used by the MIPI cameras
on various new (Meteor Lake and later) Intel laptops.
This is an USB bridge driver which adds auxbus child devices for the GPIO,
I2C and SPI functions of the USBIO chip and which exports IO-functions for
the drivers for the auxbus child devices to communicate with the USBIO
device's firmware.
Co-developed-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Israel Cepeda <israel.a.cepeda.lopez@intel.com>
Link: https://lore.kernel.org/r/20250911181343.77398-2-hansg@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- v4l2 core:
- sub-device framework routing improvements
- NV12M tiled variants added to v4l2_format_info
- some fixes at control handler freeing logic
- fixed H264 SEPARATE_COLOUR_PLANE check
- new staging driver: Intel IPU7 PCI
- Rockchip video decoder driver got promoted from staging
- iris: added HEVC/VP9 encoder/decoder support
- vsp1: driver has gained Renesas VSPX support
- uvc:
- switched to vb2 ioctl helpers
- added MSXU 1.5 metadata support
- atomisp: GC0310 sensor driver cleanups in preparation for moving it
out of staging
- Lots of cleanup, fixes and improvements
* tag 'media/v6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (310 commits)
media: rkvdec: Unstage the driver
media: rkvdec: Remove TODO file
media: dt-bindings: rockchip: Add RK3576 Video Decoder bindings
media: dt-bindings: rockchip: Document RK3588 Video Decoder bindings
media: amphion: Support dmabuf and v4l2 buffer without binding
media: verisilicon: postproc: 4K support
media: v4l2: Add support for NV12M tiled variants to v4l2_format_info()
media: uvcvideo: Use a count variable for meta_formats instead of 0 terminating
media: uvcvideo: Auto-set UVC_QUIRK_MSXU_META
media: uvcvideo: Introduce V4L2_META_FMT_UVC_MSXU_1_5
media: uvcvideo: Introduce dev->meta_formats
media: Documentation: Add note about UVCH length field
media: uvcvideo: Do not mark valid metadata as invalid
media: uvcvideo: uvc_v4l2_unlocked_ioctl: Invert PM logic
media: core: export v4l2_translate_cmd
media: uvcvideo: Turn on the camera if V4L2_EVENT_SUB_FL_SEND_INITIAL
media: uvcvideo: Remove stream->is_streaming field
media: uvcvideo: Split uvc_stop_streaming()
media: uvcvideo: Handle locks in uvc_queue_return_buffers
media: uvcvideo: Use vb2 ioctl and fop helpers
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Wrap datapath globals into net_aligned_data, to avoid false sharing
- Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container)
- Add SO_INQ and SCM_INQ support to AF_UNIX
- Add SIOCINQ support to AF_VSOCK
- Add TCP_MAXSEG sockopt to MPTCP
- Add IPv6 force_forwarding sysctl to enable forwarding per interface
- Make TCP validation of whether packet fully fits in the receive
window and the rcv_buf more strict. With increased use of HW
aggregation a single "packet" can be multiple 100s of kB
- Add MSG_MORE flag to optimize large TCP transmissions via sockmap,
improves latency up to 33% for sockmap users
- Convert TCP send queue handling from tasklet to BH workque
- Improve BPF iteration over TCP sockets to see each socket exactly
once
- Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code
- Support enabling kernel threads for NAPI processing on per-NAPI
instance basis rather than a whole device. Fully stop the kernel
NAPI thread when threaded NAPI gets disabled. Previously thread
would stick around until ifdown due to tricky synchronization
- Allow multicast routing to take effect on locally-generated packets
- Add output interface argument for End.X in segment routing
- MCTP: add support for gateway routing, improve bind() handling
- Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink
- Add a new neighbor flag ("extern_valid"), which cedes refresh
responsibilities to userspace. This is needed for EVPN multi-homing
where a neighbor entry for a multi-homed host needs to be synced
across all the VTEPs among which the host is multi-homed
- Support NUD_PERMANENT for proxy neighbor entries
- Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM
- Add sequence numbers to netconsole messages. Unregister
netconsole's console when all net targets are removed. Code
refactoring. Add a number of selftests
- Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol
should be used for an inbound SA lookup
- Support inspecting ref_tracker state via DebugFS
- Don't force bonding advertisement frames tx to ~333 ms boundaries.
Add broadcast_neighbor option to send ARP/ND on all bonded links
- Allow providing upcall pid for the 'execute' command in openvswitch
- Remove DCCP support from Netfilter's conntrack
- Disallow multiple packet duplications in the queuing layer
- Prevent use of deprecated iptables code on PREEMPT_RT
Driver API:
- Support RSS and hashing configuration over ethtool Netlink
- Add dedicated ethtool callbacks for getting and setting hashing
fields
- Add support for power budget evaluation strategy in PSE /
Power-over-Ethernet. Generate Netlink events for overcurrent etc
- Support DPLL phase offset monitoring across all device inputs.
Support providing clock reference and SYNC over separate DPLL
inputs
- Support traffic classes in devlink rate API for bandwidth
management
- Remove rtnl_lock dependency from UDP tunnel port configuration
Device drivers:
- Add a new Broadcom driver for 800G Ethernet (bnge)
- Add a standalone driver for Microchip ZL3073x DPLL
- Remove IBM's NETIUCV device driver
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support zero-copy Tx of DMABUF memory
- take page size into account for page pool recycling rings
- Intel (100G, ice, idpf):
- idpf: XDP and AF_XDP support preparations
- idpf: add flow steering
- add link_down_events statistic
- clean up the TSPLL code
- preparations for live VM migration
- nVidia/Mellanox:
- support zero-copy Rx/Tx interfaces (DMABUF and io_uring)
- optimize context memory usage for matchers
- expose serial numbers in devlink info
- support PCIe congestion metrics
- Meta (fbnic):
- add 25G, 50G, and 100G link modes to phylink
- support dumping FW logs
- Marvell/Cavium:
- support for CN20K generation of the Octeon chips
- Amazon:
- add HW clock (without timestamping, just hypervisor time access)
- Ethernet virtual:
- VirtIO net:
- support segmentation of UDP-tunnel-encapsulated packets
- Google (gve):
- support packet timestamping and clock synchronization
- Microsoft vNIC:
- add handler for device-originated servicing events
- allow dynamic MSI-X vector allocation
- support Tx bandwidth clamping
- Ethernet NICs consumer, and embedded:
- AMD:
- amd-xgbe: hardware timestamping and PTP clock support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- use napi_complete_done() return value to support NAPI polling
- add support for re-starting auto-negotiation
- Broadcom switches (b53):
- support BCM5325 switches
- add bcm63xx EPHY power control
- Synopsys (stmmac):
- lots of code refactoring and cleanups
- TI:
- icssg-prueth: read firmware-names from device tree
- icssg: PRP offload support
- Microchip:
- lan78xx: convert to PHYLINK for improved PHY and MAC management
- ksz: add KSZ8463 switch support
- Intel:
- support similar queue priority scheme in multi-queue and
time-sensitive networking (taprio)
- support packet pre-emption in both
- RealTek (r8169):
- enable EEE at 5Gbps on RTL8126
- Airoha:
- add PPPoE offload support
- MDIO bus controller for Airoha AN7583
- Ethernet PHYs:
- support for the IPQ5018 internal GE PHY
- micrel KSZ9477 switch-integrated PHYs:
- add MDI/MDI-X control support
- add RX error counters
- add cable test support
- add Signal Quality Indicator (SQI) reporting
- dp83tg720: improve reset handling and reduce link recovery time
- support bcm54811 (and its MII-Lite interface type)
- air_en8811h: support resume/suspend
- support PHY counters for QCA807x and QCA808x
- support WoL for QCA807x
- CAN drivers:
- rcar_canfd: support for Transceiver Delay Compensation
- kvaser: report FW versions via devlink dev info
- WiFi:
- extended regulatory info support (6 GHz)
- add statistics and beacon monitor for Multi-Link Operation (MLO)
- support S1G aggregation, improve S1G support
- add Radio Measurement action fields
- support per-radio RTS threshold
- some work around how FIPS affects wifi, which was wrong (RC4 is
used by TKIP, not only WEP)
- improvements for unsolicited probe response handling
- WiFi drivers:
- RealTek (rtw88):
- IBSS mode for SDIO devices
- RealTek (rtw89):
- BT coexistence for MLO/WiFi7
- concurrent station + P2P support
- support for USB devices RTL8851BU/RTL8852BU
- Intel (iwlwifi):
- use embedded PNVM in (to be released) FW images to fix
compatibility issues
- many cleanups (unused FW APIs, PCIe code, WoWLAN)
- some FIPS interoperability
- MediaTek (mt76):
- firmware recovery improvements
- more MLO work
- Qualcomm/Atheros (ath12k):
- fix scan on multi-radio devices
- more EHT/Wi-Fi 7 features
- encapsulation/decapsulation offload
- Broadcom (brcm80211):
- support SDIO 43751 device
- Bluetooth:
- hci_event: add support for handling LE BIG Sync Lost event
- ISO: add socket option to report packet seqnum via CMSG
- ISO: support SCM_TIMESTAMPING for ISO TS
- Bluetooth drivers:
- intel_pcie: support Function Level Reset
- nxpuart: add support for 4M baudrate
- nxpuart: implement powerup sequence, reset, FW dump, and FW loading"
* tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits)
dpll: zl3073x: Fix build failure
selftests: bpf: fix legacy netfilter options
ipv6: annotate data-races around rt->fib6_nsiblings
ipv6: fix possible infinite loop in fib6_info_uses_dev()
ipv6: prevent infinite loop in rt6_nlmsg_size()
ipv6: add a retry logic in net6_rt_notify()
vrf: Drop existing dst reference in vrf_ip6_input_dst
net/sched: taprio: align entry index attr validation with mqprio
net: fsl_pq_mdio: use dev_err_probe
selftests: rtnetlink.sh: remove esp4_offload after test
vsock: remove unnecessary null check in vsock_getname()
igb: xsk: solve negative overflow of nb_pkts in zerocopy mode
stmmac: xsk: fix negative overflow of budget in zerocopy mode
dt-bindings: ieee802154: Convert at86rf230.txt yaml format
net: dsa: microchip: Disable PTP function of KSZ8463
net: dsa: microchip: Setup fiber ports for KSZ8463
net: dsa: microchip: Write switch MAC address differently for KSZ8463
net: dsa: microchip: Use different registers for KSZ8463
net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver
dt-bindings: net: dsa: microchip: Add KSZ8463 switch support
...
|
|
Merge in late fixes to prepare for the 6.17 net-next PR.
Conflicts:
net/core/neighbour.c
1bbb76a89948 ("neighbour: Fix null-ptr-deref in neigh_flush_dev().")
13a936bb99fb ("neighbour: Protect tbl->phash_buckets[] with a dedicated mutex.")
03dc03fa0432 ("neighbor: Add NTF_EXT_VALIDATED flag for externally validated entries")
Adjacent changes:
drivers/net/usb/usbnet.c
0d9cfc9b8cb1 ("net: usbnet: Avoid potential RCU stall on LINK_CHANGE event")
2c04d279e857 ("net: usb: Convert tasklet API to new bottom half workqueue mechanism")
net/ipv6/route.c
31d7d67ba127 ("ipv6: annotate data-races around rt->fib6_nsiblings")
1caf27297215 ("ipv6: adopt dst_dev() helper")
3b3ccf9ed05e ("net: Remove unnecessary NULL check for lwtunnel_fill_encap()")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The Gemalto Cinterion PLS83-W modem (cdc_ether) is emitting confusing link
up and down events when the WWAN interface is activated on the modem-side.
Interrupt URBs will in consecutive polls grab:
* Link Connected
* Link Disconnected
* Link Connected
Where the last Connected is then a stable link state.
When the system is under load this may cause the unlink_urbs() work in
__handle_link_change() to not complete before the next usbnet_link_change()
call turns the carrier on again, allowing rx_submit() to queue new SKBs.
In that event the URB queue is filled faster than it can drain, ending up
in a RCU stall:
rcu: INFO: rcu_sched detected expedited stalls on CPUs/tasks: { 0-.... } 33108 jiffies s: 201 root: 0x1/.
rcu: blocking rcu_node structures (internal RCU debug):
Sending NMI from CPU 1 to CPUs 0:
NMI backtrace for cpu 0
Call trace:
arch_local_irq_enable+0x4/0x8
local_bh_enable+0x18/0x20
__netdev_alloc_skb+0x18c/0x1cc
rx_submit+0x68/0x1f8 [usbnet]
rx_alloc_submit+0x4c/0x74 [usbnet]
usbnet_bh+0x1d8/0x218 [usbnet]
usbnet_bh_tasklet+0x10/0x18 [usbnet]
tasklet_action_common+0xa8/0x110
tasklet_action+0x2c/0x34
handle_softirqs+0x2cc/0x3a0
__do_softirq+0x10/0x18
____do_softirq+0xc/0x14
call_on_irq_stack+0x24/0x34
do_softirq_own_stack+0x18/0x20
__irq_exit_rcu+0xa8/0xb8
irq_exit_rcu+0xc/0x30
el1_interrupt+0x34/0x48
el1h_64_irq_handler+0x14/0x1c
el1h_64_irq+0x68/0x6c
_raw_spin_unlock_irqrestore+0x38/0x48
xhci_urb_dequeue+0x1ac/0x45c [xhci_hcd]
unlink1+0xd4/0xdc [usbcore]
usb_hcd_unlink_urb+0x70/0xb0 [usbcore]
usb_unlink_urb+0x24/0x44 [usbcore]
unlink_urbs.constprop.0.isra.0+0x64/0xa8 [usbnet]
__handle_link_change+0x34/0x70 [usbnet]
usbnet_deferred_kevent+0x1c0/0x320 [usbnet]
process_scheduled_works+0x2d0/0x48c
worker_thread+0x150/0x1dc
kthread+0xd8/0xe8
ret_from_fork+0x10/0x20
Get around the problem by delaying the carrier on to the scheduled work.
This needs a new flag to keep track of the necessary action.
The carrier ok check cannot be removed as it remains required for the
LINK_RESET event flow.
Fixes: 4b49f58fff00 ("usbnet: handle link change")
Cc: stable@vger.kernel.org
Signed-off-by: John Ernberg <john.ernberg@actia.se>
Link: https://patch.msgid.link/20250723102526.1305339-1-john.ernberg@actia.se
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If the decice does not support filtering, filtering
must not be used and all packets delivered for the
upper layers to sort.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://patch.msgid.link/20250717120649.2090929-1-oneukum@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If the camera supports the MSXU_CONTROL_METADATA control, auto set the
MSXU_META quirk.
Reviewed-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20250707-uvc-meta-v8-5-ed17f8b1218b@chromium.org
Signed-off-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Cross-merge networking fixes after downstream PR (net-6.16-rc6).
No conflicts.
Adjacent changes:
Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml
0a12c435a1d6 ("dt-bindings: net: sun8i-emac: Add A100 EMAC compatible")
b3603c0466a8 ("dt-bindings: net: sun8i-emac: Rename A523 EMAC0 to GMAC0")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We need the USB fixes in here as well to build on top of for other
changes that depend on them.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
A poorly implemented DisplayPort Alt Mode port partner can indicate
that its pin assignment capabilities are greater than the maximum
value, DP_PIN_ASSIGN_F. In this case, calls to pin_assignment_show
will cause a BRK exception due to an out of bounds array access.
Prevent for loop in pin_assignment_show from accessing
invalid values in pin_assignments by adding DP_PIN_ASSIGN_MAX
value in typec_dp.h and using i < DP_PIN_ASSIGN_MAX as a loop
condition.
Fixes: 0e3bb7d6894d ("usb: typec: Add driver for DisplayPort alternate mode")
Cc: stable <stable@kernel.org>
Signed-off-by: RD Babiera <rdbabiera@google.com>
Reviewed-by: Badhri Jagan Sridharan <badhri@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20250618224943.3263103-2-rdbabiera@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Migrate tasklet APIs to the new bottom half workqueue mechanism. It
replaces all occurrences of tasklet usage with the appropriate workqueue
APIs throughout the usbnet driver. This transition ensures compatibility
with the latest design and enhances performance.
Signed-off-by: Jun Miao <jun.miao@intel.com>
Link: https://patch.msgid.link/20250618173923.950510-1-jun.miao@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The device controller will send CI_HDRC_CONTROLLER_PULLUP_EVENT event
when it's going to pullup or pulldown data line.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/20250614125645.207732-2-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
usb_remove_config() was added in 2012's
commit Fixes: 51cce6fc155c ("usb: gadget: composite: Add
usb_remove_config")
but has remained unused.
I see there was a use in drivers/staging/cch that
was removed by
commit 515e6dd20b3f ("Staging: ccg: delete it from the tree")
but it had it's own copy of usb_remove_config()
Remove it.
Signed-off-by: "Dr. David Alan Gilbert" <linux@treblig.org>
Link: https://lore.kernel.org/r/20250608233338.179894-3-linux@treblig.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
usb_gadget_config_buf() has been unused since 2012's
commit fa06920a3ece ("usb: gadget: Remove File-backed Storage Gadget
(g_file_storage).")
Remove it.
Signed-off-by: "Dr. David Alan Gilbert" <linux@treblig.org>
Link: https://lore.kernel.org/r/20250608233338.179894-2-linux@treblig.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
tegra_ehci_phy_restore_start() and tegra_ehci_phy_restore_end()
last use was removed in 2013 by
commit a4faa54e3aa2 ("USB: EHCI: tegra: remove all power management")
tegra_usb_phy_preresume() and tegra_usb_phy_postresume() last
use was removed in 2020 by
commit c3590c7656fb ("usb: host: ehci-tegra: Remove the driver")
(Although that one makes me wonder how much of the rest of the file
is actually used)
Remove both sets.
Signed-off-by: "Dr. David Alan Gilbert" <linux@treblig.org>
Link: https://lore.kernel.org/r/20250603203905.279307-1-linux@treblig.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In struct usb_function, the struct usb_function_instance pointer
variable "fi" is listed as const, but it is written to in numerous
places, making the const marking of it a total lie. Fix this up by just
removing the const pointer attribute as this is modified in numerous
places.
Link: https://lore.kernel.org/r/2025052145-undress-puma-f7cf@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In the case of handling a USB bus reset, the xhci_discover_or_reset_device
can run without first notifying the xHCI sideband client driver to stop or
prevent the use of the transfer ring. It was seen that when a bus reset
situation happened, the USB offload driver was attempting to fetch the xHCI
transfer ring information, which was already freed.
Tested-by: Puma Hsu <pumahsu@google.com>
Tested-by: Daehwan Jung <dh10.jung@samsung.com>
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250409194804.3773260-6-quic_wcheng@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Some clients may operate only on a specific XHCI interrupter instance.
Allow for the associated class driver to request for the interrupter that
it requires.
Tested-by: Puma Hsu <pumahsu@google.com>
Tested-by: Daehwan Jung <dh10.jung@samsung.com>
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250409194804.3773260-4-quic_wcheng@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Introduce XHCI sideband, which manages the USB endpoints being requested by
a client driver. This is used for when client drivers are attempting to
offload USB endpoints to another entity for handling USB transfers. XHCI
sec intr will allow for drivers to fetch the required information about the
transfer ring, so the user can submit transfers independently. Expose the
required APIs for drivers to register and request for a USB endpoint and to
manage XHCI secondary interrupters.
Driver renaming, multiple ring segment page linking, proper endpoint clean
up, and allowing module compilation added by Wesley Cheng to complete
original concept code by Mathias Nyman.
Tested-by: Puma Hsu <pumahsu@google.com>
Tested-by: Daehwan Jung <dh10.jung@samsung.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Co-developed-by: Wesley Cheng <quic_wcheng@quicinc.com>
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250409194804.3773260-2-quic_wcheng@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver updates for
6.15-rc1. Included in here are:
- Thunderbolt driver and core api updates for new hardware and
features
- usb-storage const array cleanups
- typec driver updates
- dwc3 driver updates
- xhci driver updates and bugfixes
- small USB documentation updates
- usb cdns3 driver updates
- usb gadget driver updates
- other small driver updates and fixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (92 commits)
thunderbolt: Do not add non-active NVM if NVM upgrade is disabled for retimer
thunderbolt: Scan retimers after device router has been enumerated
usb: host: cdns3: forward lost power information to xhci
usb: host: xhci-plat: allow upper layers to signal power loss
usb: xhci: change xhci_resume() parameters to explicit the desired info
usb: cdns3-ti: run HW init at resume() if HW was reset
usb: cdns3-ti: move reg writes to separate function
usb: cdns3: call cdns_power_is_lost() only once in cdns_resume()
usb: cdns3: rename hibernated argument of role->resume() to lost_power
usb: xhci: tegra: rename `runtime` boolean to `is_auto_runtime`
usb: host: xhci-plat: mvebu: use ->quirks instead of ->init_quirk() func
usb: dwc3: Don't use %pK through printk
usb: core: Don't use %pK through printk
usb: gadget: aspeed: Add NULL pointer check in ast_vhub_init_dev()
dt-bindings: usb: qcom,dwc3: Synchronize minItems for interrupts and -names
usb: common: usb-conn-gpio: switch psy_cfg from of_node to fwnode
usb: xhci: Avoid Stop Endpoint retry loop if the endpoint seems Running
usb: xhci: Don't change the status of stalled TDs on failed Stop EP
xhci: Avoid queuing redundant Stop Endpoint command for stalled endpoint
xhci: Handle spurious events on Etron host isoc enpoints
...
|
|
otg_ulpi_create() has been unused since 2022's
commit 8ca79aaad8be ("ARM: pxa: remove unused pxa3xx-ulpi")
Remove it.
The devm_ variant is still used.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://lore.kernel.org/r/20250223160602.91916-1-linux@treblig.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Upcoming changes will add a USB host (and later gadget) driver for the
MCTP-over-USB protocol. Add a header that provides common definitions
for protocol support: the packet header format and a few framing
definitions. Add a define for the MCTP class code, as per
https://usb.org/defined-class-codes.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20250221-dev-mctp-usb-v3-1-3353030fe9cc@codeconstruct.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The Dell AW1022z is an RTL8156B based 2.5G Ethernet controller.
Add the vendor and product ID values to the driver. This makes Ethernet
work with the adapter.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Link: https://patch.msgid.link/20250206224033.980115-1-olek2@wp.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
'struct musb_fifo_cfg' are not modified in these drivers.
Constifying these structures moves some data to a read-only section, so
increase overall security.
On a x86_64, with allmodconfig, as an example:
Before:
======
text data bss dec hex filename
64381 5537 202 70120 111e8 drivers/usb/musb/musb_core.o
After:
=====
text data bss dec hex filename
64957 4929 202 70088 111c8 drivers/usb/musb/musb_core.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/26e6f3e25dc8e785d0034dd7e59918e455563e60.1737234596.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The Source can drop its output voltage to the minimum of the requested
PPS APDO voltage range when it is in Current Limit Mode. If this voltage
falls within the range of vPpsShutdown, the Source initiates a Hard
Reset and discharges Vbus. However, currently the Sink may disconnect
before the voltage reaches vPpsShutdown, leading to unexpected behavior.
Prevent premature disconnection by setting the Sink's disconnect
threshold to the minimum vPpsShutdown value. Additionally, consider the
voltage drop due to IR drop when calculating the appropriate threshold.
This ensures a robust and reliable interaction between the Source and
Sink during SPR PPS Current Limit Mode operation.
Fixes: 4288debeaa4e ("usb: typec: tcpci: Fix up sink disconnect thresholds for PD")
Cc: stable <stable@kernel.org>
Signed-off-by: Kyle Tso <kyletso@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Badhri Jagan Sridharan <badhri@google.com>
Link: https://lore.kernel.org/r/20250114142435.2093857-1-kyletso@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Static devm_usb_phy_match() is only called by API devm_usb_put_phy(), and
the API has no caller now.
Remove the API and the static function.
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20250112-remove_api-v1-1-49cc8f792ac9@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The active property of port altmode should be writable (to prevent or
allow partner altmodes from entering) and needs to be part of
typec_altmode_desc so we can initialize the port to an inactive state if
desired.
Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Benson Leung <bleung@chromium.org>
Link: https://lore.kernel.org/r/20241213153543.v5.3.I794566684ab2965e209f326b08232006eff333f8@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Thunderbolt 3 Alternate Mode entry flow is described in
USB Type-C Specification Release 2.0.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Co-developed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Reviewed-by: Benson Leung <bleung@chromium.org>
Link: https://lore.kernel.org/r/20241213153543.v5.2.I3080b036e8de0b9957c57c1c3059db7149c5e549@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This commit adds a new AMS for responding to a "Get_Revision" request.
Revision message consists of the following fields:
+----------------------------------------------------+
| Header | RMDO |
| No. of data objects = 1 | |
+----------------------------------------------------+
While RMDO consists of:
* B31..28 Revision Major
* B27..24 Revision Minor
* B23..20 Version Major
* B19..16 Version Minor
* B15..0 Reserved, shall be set to zero.
As per the PD spec ("8.3.3.16.2.1 PR_Give_Revision State"), a request is
only expected when an explicit contract is established and the port is
in ready state. This AMS is only supported for PD >= 3.0.
Signed-off-by: Amit Sunil Dhamne <amitsd@google.com>
Reviewed-by: Badhri Jagan Sridharan <badhri@google.com>
Link: https://lore.kernel.org/r/20241210-get_rev_upstream-v2-3-d0094e52d48f@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The meaning of this value is already used in several places,
but with constant values and comments to explain it separately.
It's better to have a central place to do this then use the macro
in those places for better readability.
Signed-off-by: Dingyan Li <18500469033@163.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20241030083858.46907-1-18500469033@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt changes for 6.13-rc1.
Overall, a pretty slow development cycle, the majority of the work
going into the debugfs interface for the thunderbolt (i.e. USB4) code,
to help with debugging the myrad ways that hardware vendors get their
interfaces messed up. Other than that, here's the highlights:
- thunderbolt changes and additions to debugfs interfaces
- lots of device tree updates for new and old hardware
- UVC configfs gadget updates and new apis for features
- xhci driver updates and fixes
- dwc3 driver updates and fixes
- typec driver updates and fixes
- lots of other small updates and fixes, full details in the shortlog
All of these have been in linux-next for a while with no reported
problems"
* tag 'usb-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (148 commits)
usb: typec: tcpm: Add support for sink-bc12-completion-time-ms DT property
dt-bindings: usb: maxim,max33359: add usage of sink bc12 time property
dt-bindings: connector: Add time property for Sink BC12 detection completion
usb: dwc3: gadget: Remove dwc3_request->needs_extra_trb
usb: dwc3: gadget: Cleanup SG handling
usb: dwc3: gadget: Fix looping of queued SG entries
usb: dwc3: gadget: Fix checking for number of TRBs left
usb: dwc3: ep0: Don't clear ep0 DWC3_EP_TRANSFER_STARTED
Revert "usb: gadget: composite: fix OS descriptors w_value logic"
usb: ehci-spear: fix call balance of sehci clk handling routines
USB: make to_usb_device_driver() use container_of_const()
USB: make to_usb_driver() use container_of_const()
USB: properly lock dynamic id list when showing an id
USB: make single lock for all usb dynamic id lists
drivers/usb/storage: refactor min with min_t
drivers/usb/serial: refactor min with min_t
drivers/usb/musb: refactor min/max with min_t/max_t
drivers/usb/mon: refactor min with min_t
drivers/usb/misc: refactor min with min_t
drivers/usb/host: refactor min/max with min_t/max_t
...
|
|
In the flags, direction is in bit 7 instead of bit 0 based
on the specification.
Signed-off-by: Dingyan Li <18500469033@163.com>
Link: https://lore.kernel.org/r/20241020074721.26905-1-18500469033@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
