summaryrefslogtreecommitdiff
path: root/include/linux/sunrpc
AgeCommit message (Collapse)AuthorFilesLines
2005-10-19RPCSEC_GSS: krb5 cleanupJ. Bruce Fields1-8/+4
Remove some senseless wrappers. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-10-19RPCSEC_GSS remove all qop parametersJ. Bruce Fields4-27/+8
Not only are the qop parameters that are passed around throughout the gssapi unused by any currently implemented mechanism, but there appears to be some doubt as to whether they will ever be used. Let's just kill them off for now. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-10-19RPCSEC_GSS: Add support for privacy to krb5 rpcsec_gss mechanism.J. Bruce Fields1-1/+17
Add support for privacy to the krb5 rpcsec_gss mechanism. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-10-19RPCSEC_GSS: krb5 pre-privacy cleanupJ. Bruce Fields1-3/+2
The code this was originally derived from processed wrap and mic tokens using the same functions. This required some contortions, and more would be required with the addition of xdr_buf's, so it's better to separate out the two code paths. In preparation for adding privacy support, remove the last vestiges of the old wrap token code. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-10-19RPCSEC_GSS: cleanup au_rslack calculationJ. Bruce Fields1-1/+6
Various xdr encode routines use au_rslack to guess where the reply argument will end up, so we can set up the xdr_buf to recieve data into the right place for zero copy. Currently we calculate the au_rslack estimate when we check the verifier. Normally this only depends on the verifier size. In the integrity case we add a few bytes to allow for a length and sequence number. It's a bit simpler to calculate only the verifier size when we check the verifier, and delay the full calculation till we unwrap. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-10-19SUNRPC: Provide a callback to allow free pages allocated during xdr encodingJ. Bruce Fields1-1/+4
For privacy, we need to allocate pages to store the encrypted data (passed in pages can't be used without the risk of corrupting data in the page cache). So we need a way to free that memory after the request has been transmitted. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-10-19SUNRPC: Add support for privacy to generic gss-api code.J. Bruce Fields1-0/+22
Add support for privacy to generic gss-api code. This is dead code until we have both a mechanism that supports privacy and code in the client or server that uses it. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-10-19RPC: allow call_encode() to delay transmission of an RPC call.Trond Myklebust1-0/+1
Currently, call_encode will cause the entire RPC call to abort if it returns an error. This is unnecessarily rigid, and gets in the way of attempts to allow the NFSv4 layer to order RPC calls that carry sequence ids. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-09-23Revert "[PATCH] RPC,NFS: new rpc_pipefs patch"Trond Myklebust2-6/+5
This reverts 17f4e6febca160a9f9dd4bdece9784577a2f4524 commit.
2005-09-23[PATCH] RPC,NFS: new rpc_pipefs patchChristoph Hellwig2-5/+6
Currently rpc_mkdir/rpc_rmdir and rpc_mkpipe/mk_unlink have an API that's a little unfortunate. They take a path relative to the rpc_pipefs root and thus need to perform a full lookup. If you look at debugfs or usbfs they always store the dentry for directories they created and thus can pass in a dentry + single pathname component pair into their equivalents of the above functions. And in fact rpc_pipefs actually stores a dentry for all but one component so this change not only simplifies the core rpc_pipe code but also the callers. Unfortuntately this code path is only used by the NFS4 idmapper and AUTH_GSSAPI for which I don't have a test enviroment. Could someone give it a spin? It's the last bit needed before we can rework the lookup_hash API Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-09-23[PATCH] RPC: rationalize set_buffer_sizeChuck Lever1-2/+2
In fact, ->set_buffer_size should be completely functionless for non-UDP. Test-plan: Check socket buffer size on UDP sockets over time. Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-09-23[PATCH] RPC: parametrize various transport connect timeoutsChuck Lever1-23/+6
Each transport implementation can now set unique bind, connect, reestablishment, and idle timeout values. These are variables, allowing the values to be modified dynamically. This permits exponential backoff of any of these values, for instance. As an example, we implement exponential backoff for the connection reestablishment timeout. Test-plan: Destructive testing (unplugging the network temporarily). Connectathon with UDP and TCP. Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-09-23[PATCH] RPC: allow RPC client's port range to be adjustableChuck Lever2-3/+16
Select an RPC client source port between 650 and 1023 instead of between 1 and 800. The old range conflicts with a number of network services. Provide sysctls to allow admins to select a different port range. Note that this doesn't affect user-level RPC library behavior, which still uses 1 to 800. Based on a suggestion by Olaf Kirch <okir@suse.de>. Test-plan: Repeated mount and unmount. Destructive testing. Idle timeouts. Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-09-23[PATCH] RPC: clean up after nocong was removedChuck Lever1-22/+0
Clean-up: Move some macros that are specific to the Van Jacobson implementation into xprt.c. Get rid of the cong_wait field in rpc_xprt, which is no longer used. Get rid of xprt_clear_backlog. Test-plan: Compile with CONFIG_NFS enabled. Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-09-23[PATCH] RPC: remove xprt->nocongChuck Lever1-1/+0
Get rid of the "xprt->nocong" variable. Test-plan: Use WAN simulation to cause sporadic bursty packet loss with UDP mounts. Look for significant regression in performance or client stability. Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-09-23[PATCH] RPC: add a release_rqst callout to the RPC transport switchChuck Lever1-0/+2
The final place where congestion control state is adjusted is in xprt_release, where each request is finally released. Add a callout there to allow transports to perform additional processing when a request is about to be released. Test-plan: Use WAN simulation to cause sporadic bursty packet loss. Look for significant regression in performance or client stability. Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-09-23[PATCH] RPC: add generic interface for adjusting the congestion windowChuck Lever1-1/+2
A new interface that allows transports to adjust their congestion window using the Van Jacobson implementation in xprt.c is provided. Test-plan: Use WAN simulation to cause sporadic bursty packet loss. Look for significant regression in performance or client stability. Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-09-23[PATCH] RPC: separate xprt_timer implementationsChuck Lever1-0/+2
Allow transports to hook the retransmit timer interrupt. Some transports calculate their congestion window here so that a retransmit timeout has immediate effect on the congestion window. Test-plan: Use WAN simulation to cause sporadic bursty packet loss. Look for significant regression in performance or client stability. Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-09-23[PATCH] RPC: expose API for serializing access to RPC transportsChuck Lever1-0/+3
The next method we abstract is the one that releases a transport, allowing another task to have access to the transport. Again, one generic version of this is provided for transports that don't need the RPC client to perform congestion control, and one version is for transports that can use the original Van Jacobson implementation in xprt.c. Test-plan: Use WAN simulation to cause sporadic bursty packet loss. Look for significant regression in performance or client stability. Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-09-23[PATCH] RPC: expose API for serializing access to RPC transportsChuck Lever1-0/+3
The next several patches introduce an API that allows transports to choose whether the RPC client provides congestion control or whether the transport itself provides it. The first method we abstract is the one that serializes access to the RPC transport to prevent the bytes from different requests from mingling together. This method provides proper request serialization and the opportunity to prevent new requests from being started because the transport is congested. The normal situation is for the transport to handle congestion control itself. Although NFS over UDP was first, it has been recognized after years of experience that having the transport provide congestion control is much better than doing it in the RPC client. Thus TCP, and probably every future transport implementation, will use the default method, xprt_lock_write, provided in xprt.c, which does not provide any kind of congestion control. UDP can continue using the xprt.c-provided Van Jacobson congestion avoidance implementation. Test-plan: Use WAN simulation to cause sporadic bursty packet loss. Look for significant regression in performance or client stability. Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-09-23[PATCH] RPC: add API to set transport-specific timeoutsChuck Lever1-0/+3
Prepare the way to remove the "xprt->nocong" variable by adding a callout to the RPC client transport switch API to handle setting RPC retransmit timeouts. Add a pair of generic helper functions that provide the ability to set a simple fixed timeout, or to set a timeout based on the state of a round- trip estimator. Test-plan: Use WAN simulation to cause sporadic bursty packet loss. Look for significant regression in performance or client stability. Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-09-23[PATCH] RPC: get rid of xprt->streamChuck Lever1-2/+1
Now we can fix up the last few places that use the "xprt->stream" variable, and get rid of it from the rpc_xprt structure. Test-plan: Destructive testing (unplugging the network temporarily). Connectathon with UDP and TCP. Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-09-23[PATCH] RPC: skip over transport-specific heads automaticallyChuck Lever2-0/+32
Add a generic mechanism for skipping over transport-specific headers when constructing an RPC request. This removes another "xprt->stream" dependency. Test-plan: Write-intensive workload on a single mount point (try both UDP and TCP). Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-09-23[PATCH] RPC: separate TCP and UDP write space callbacksChuck Lever1-0/+2
Split the socket write space callback function into a TCP version and UDP version, eliminating one dependence on the "xprt->stream" variable. Keep the common pieces of this path in xprt.c so other transports can use it too. Test-plan: Write-intensive workload on a single mount point. Version: Thu, 11 Aug 2005 16:07:51 -0400 Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-09-23[PATCH] RPC: client-side transport switch cleanupChuck Lever1-26/+35
Clean-up: change some comments to reflect the realities of the new RPC transport switch mechanism. Get rid of unused xprt_receive() prototype. Also, organize function prototypes in xprt.h by usage and scope. Test-plan: Compile kernel with CONFIG_NFS enabled. Version: Thu, 11 Aug 2005 16:07:21 -0400 Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-09-23[PATCH] RPC: Add helper for waking tasks pending on a transportChuck Lever1-0/+1
Clean-up: remove only reference to xprt->pending from the socket transport implementation. This makes a cleaner interface for other transport implementations as well. Test-plan: Compile kernel with CONFIG_NFS enabled. Version: Thu, 11 Aug 2005 16:06:52 -0400 Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-09-23[PATCH] RPC: rename the sockstate fieldChuck Lever1-11/+49
Clean-up: get rid of a name reference to sockets in the generic parts of the RPC client by renaming the sockstate field in the rpc_xprt structure. Test-plan: Compile kernel with CONFIG_NFS enabled. Version: Thu, 11 Aug 2005 16:05:53 -0400 Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-09-23[PATCH] RPC: Rename xprt_lockChuck Lever1-1/+1
Clean-up: Replace the xprt_lock with something more aptly named. This lock single-threads the XID and request slot reservation process. Test-plan: Compile kernel with CONFIG_NFS enabled. Version: Thu, 11 Aug 2005 16:05:26 -0400 Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-09-23[PATCH] RPC: Rename sock_lockChuck Lever1-1/+1
Clean-up: replace a name reference to sockets in the generic parts of the RPC client by renaming sock_lock in the rpc_xprt structure. Test-plan: Compile kernel with CONFIG_NFS enabled. Version: Thu, 11 Aug 2005 16:05:00 -0400 Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-09-23[PATCH] RPC: transport switch function namingChuck Lever1-0/+1
Introduce block header comments and a function naming convention to the socket transport implementation. Provide a debug setting for transports that is separate from RPCDBG_XPRT. Eliminate xprt_default_timeout(). Provide block comments for exposed interfaces in xprt.c, and eliminate the useless obvious comments. Convert printk's to dprintk's. Test-plan: Compile kernel with CONFIG_NFS enabled. Version: Thu, 11 Aug 2005 16:04:04 -0400 Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-09-23[PATCH] RPC: introduce client-side transport switchChuck Lever2-12/+31
Move the bulk of client-side socket-specific code into a separate source file, net/sunrpc/xprtsock.c. Test-plan: Millions of fsx operations. Performance characterization such as "sio" or "iozone". Destructive testing (unplugging the network temporarily, server reboots). Connectathon with v2, v3, and v4. Version: Thu, 11 Aug 2005 16:03:38 -0400 Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-09-23[PATCH] RPC: extract socket logic common to both client and serverChuck Lever1-0/+1
Clean-up: Move some code that is common to both RPC client- and server-side socket transports into its own source file, net/sunrpc/socklib.c. Test-plan: Compile kernel with CONFIG_NFS enabled. Millions of fsx operations over UDP, client and server. Connectathon over UDP. Version: Thu, 11 Aug 2005 16:03:09 -0400 Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-09-08[PATCH] sunrpc: cache_register can use wrong module referenceBruce Allan1-0/+1
When registering an RPC cache, cache_register() always sets the owner as the sunrpc module. However, there are RPC caches owned by other modules. With the incorrect owner setting, the real owning module can be removed potentially with an open reference to the cache from userspace. For example, if one were to stop the nfs server and unmount the nfsd filesystem, the nfsd module could be removed eventhough rpc.idmapd had references to the idtoname and nametoid caches (i.e. /proc/net/rpc/nfs4.<cachename>/channel is still open). This resulted in a system panic on one of our machines when attempting to restart the nfs services after reloading the nfsd module. The following patch adds a 'struct module *owner' field in struct cache_detail. The owner is further assigned to the struct proc_dir_entry in cache_register() so that the module cannot be unloaded while user-space daemons have an open reference on the associated file under /proc. Signed-off-by: Bruce Allan <bwa@us.ibm.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-16[PATCH] NFS: Ensure ACL xdr code doesn't overflow.Trond Myklebust1-0/+1
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23[PATCH] NFSD: Add server support for NFSv3 ACLs.Andreas Gruenbacher1-0/+11
This adds functions for encoding and decoding POSIX ACLs for the NFSACL protocol extension, and the GETACL and SETACL RPCs. The implementation is compatible with NFSACL in Solaris. Signed-off-by: Andreas Gruenbacher <agruen@suse.de> Acked-by: Olaf Kirch <okir@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-06-23[PATCH] RPC: Allow the sunrpc server to multiplex serveral programs on a ↵Andreas Gruenbacher1-1/+2
single port The NFS and NFSACL programs run on the same RPC transport. This patch adds support for this by converting svc_program into a chained list of programs (server-side). Signed-off-by: Andreas Gruenbacher <agruen@suse.de> Signed-off-by: Olaf Kirch <okir@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-06-23[PATCH] RPC: Encode and decode arbitrary XDR arraysAndreas Gruenbacher1-1/+18
Signed-off-by: Andreas Gruenbacher <agruen@suse.de> Acked-by: Olaf Kirch <okir@suse.de> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-06-23[PATCH] RPC: fix accounting bug in the case of a truncated RPC messageTrond Myklebust1-1/+1
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-06-23[PATCH] RPC: Lazy RPC receive buffer allocationOlaf Kirch1-1/+1
Signed-off-by: Olaf Kirch <okir@suse.de> Signed-off-by: Andreas Gruenbacher <agruen@suse.de> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-06-23[PATCH] RPC: Allow multiple RPC client programs to share the same transportAndreas Gruenbacher1-0/+2
Signed-off-by: Andreas Gruenbacher <agruen@suse.de> Acked-by: Olaf Kirch <okir@suse.de> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-06-23[PATCH] RPC: Shrink struct rpc_task by switching to wait_on_bit()Trond Myklebust1-1/+0
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-06-23[PATCH] RPC: Make rpc_create_client() probe server for RPC program+version ↵Trond Myklebust1-0/+4
support Ensure that we don't create an RPC client without checking that the server does indeed support the RPC program + version that we are trying to set up. This enables us to immediately return an error to "mount" if it turns out that the server is only supporting NFSv2, when we requested NFSv3 or NFSv4. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-04-17Linux-2.6.12-rc2v2.6.12-rc2Linus Torvalds22-0/+2940
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-20 23:41:06 +0300