summaryrefslogtreecommitdiff
path: root/include/linux/soc
AgeCommit message (Collapse)AuthorFilesLines
9 daysMerge tag 'phy-for-7.0' of ↵Linus Torvalds2-0/+65
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy Pull phy updates from Vinod Koul: "Core: - Add suuport for "rx-polarity" and "tx-polarity" device tree properties and phy common properties to manage this New Support: - Qualcomm Glymur PCIe Gen4 2-lanes PCIe phy, DP and edp phy, USB UNI PHY and SMB2370 eUSB2 repeater. SC8280xp QMP UFS PHY, Kaanapali PCIe phy and QMP PHY, QCS615 QMP USB3+DP PHY and driver support for that. - SpacemiT PCIe/combo PHY and K1 USB2 PHY driver. - HDMI 2.1 FRL configuration support and driver enabling for rockchip samsung-hdptx driver - TI TCAN1046 phy - Renesas RZ/V2H(P) and RZ/V2N usb3 - Mediatek MT8188 hdmi-phy - Google Tensor SoC USB PHY driver - Apple Type-C PHY Updates: - Subsystem conversion for clock round_rate() to determine_rate() - TI USB3 DT schema conversion - Samsung ExynosAutov920 usb3, combo hsphy and ssphy support" * tag 'phy-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (143 commits) phy: ti: phy-j721e-wiz: convert from divider_round_rate() to divider_determine_rate() dt-bindings: phy: ti,control-phy-otghs: convert to DT schema dt-bindings: phy: ti,phy-usb3: convert to DT schema phy: tegra: xusb: Remove unused powered_on variable phy: renesas: rcar-gen3-usb2: add regulator dependency phy: GOOGLE_USB: add TYPEC dependency phy: enter drivers/phy/Makefile even without CONFIG_GENERIC_PHY phy: renesas: rcar-gen3-usb2: Use mux-state for phyrst management phy: renesas: rcar-gen3-usb2: Add regulator for OTG VBUS control phy: renesas: rcar-gen3-usb2: Use devm_pm_runtime_enable() phy: renesas: rcar-gen3-usb2: Factor out VBUS control logic dt-bindings: phy: renesas,usb2-phy: Document RZ/G3E SoC dt-bindings: phy: renesas,usb2-phy: Document mux-states property dt-bindings: phy: renesas,usb2-phy: Document USB VBUS regulator phy: rockchip: samsung-hdptx: Add HDMI 2.1 FRL support phy: rockchip: samsung-hdptx: Extend rk_hdptx_phy_verify_hdmi_config() helper phy: rockchip: samsung-hdptx: Switch to driver specific HDMI config phy: rockchip: samsung-hdptx: Drop hw_rate driver data phy: rockchip: samsung-hdptx: Compute clk rate from PLL config phy: rockchip: samsung-hdptx: Cleanup *_cmn_init_seq lists ...
2026-02-11Merge tag 'sound-7.0-rc1' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "It's been relatively calm for a new era; majority of changes are for ASoC, mostly device-specific changes, while there are a bit of cleanups in core stuff. A few SPI API and regmap updates are included to be used by sound drivers, too. Core: - A few trivial cleanups about __free() and runtime PM macros - Convert to new snd_seq_bus binding ASoC: - Generic SDCA support for reporting jack events - Continuing platform support, cleanup and feature improvements for AMD, Intel, Qualcomm and SOF code - Platform description improvements for the Cirrus drivers - Support for NXP i.MX952, Realtek RT1320 and RT5575, and Sophogo CV1800B HD- and USB-audio: - Many quirks as usual" * tag 'sound-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (341 commits) ALSA: usb-audio: Add DSD support for iBasso DC04U ALSA: mixer: oss: Add card disconnect checkpoints ASoC: SOF: ipc4-control: Set correct error code in refresh_bytes_control ASoC: SOF: Intel: select CONFIG_SND_HDA_EXT_CORE from SND_SOC_SOF_HDA_COMMON ALSA: usb-audio: Add iface reset and delay quirk for AB13X USB Audio ASoC: amd: maintainer information ALSA: ctxfi: Add quirk for SE-300PCIE variant (160b:0102) ALSA: hda/generic: fix typos in comments ALSA: hda/realtek - Enable mute LEDs on HP ENVY x360 15-es0xxx ALSA: hda/conexant: Add quirk for HP ZBook Studio G4 ASoC: fsl_asrc_dma: allocate memory from dma device ASoC: fsl_asrc: Add support for i.MX952 platform ASoC: fsl_asrc_m2m: Add option to start ASRC before DMA device for M2M ASoC: dt-bindings: fsl,imx-asrc: Add support for i.MX952 platform ALSA: oss: delete self assignment ASoC: rockchip: spdif: Convert to FIELD_PREP ASoC: rockchip: spdif: Fill IEC958 CS info per params ASoC: rockchip: spdif: Add support for format S32_LE ASoC: rockchip: spdif: Add support for set mclk rate ASoC: rockchip: spdif: Swap PCM and DAI component registration order ...
2026-02-11Merge tag 'soc-drivers-7.0' of ↵Linus Torvalds5-11/+116
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull SoC driver updates from Arnd Bergmann: "There are are a number of to firmware drivers, in particular the TEE subsystem: - a bus callback for TEE firmware that device drivers can register to - sysfs support for tee firmware information - minor updates to platform specific TEE drivers for AMD, NXP, Qualcomm and the generic optee driver - ARM SCMI firmware refactoring to improve the protocol discover among other fixes and cleanups - ARM FF-A firmware interoperability improvements The reset controller and memory controller subsystems gain support for additional hardware platforms from Mediatek, Renesas, NXP, Canaan and SpacemiT. Most of the other changes are for random drivers/soc code. Among a number of cleanups and newly added hardware support, including: - Mediatek MT8196 DVFS power management and mailbox support - Qualcomm SCM firmware and MDT loader refactoring, as part of the new Glymur platform support. - NXP i.MX9 System Manager firmware support for accessing the syslog - Minor updates for TI, Renesas, Samsung, Apple, Marvell and AMD SoCs" * tag 'soc-drivers-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (171 commits) bus: fsl-mc: fix an error handling in fsl_mc_device_add() reset: spacemit: Add SpacemiT K3 reset driver reset: spacemit: Extract common K1 reset code reset: Create subdirectory for SpacemiT drivers dt-bindings: soc: spacemit: Add K3 reset support and IDs reset: canaan: k230: drop OF dependency and enable by default reset: rzg2l-usbphy-ctrl: Add suspend/resume support reset: rzg2l-usbphy-ctrl: Propagate the return value of regmap_field_update_bits() reset: gpio: check the return value of gpiod_set_value_cansleep() reset: imx8mp-audiomix: Support i.MX8ULP SIM LPAV reset: imx8mp-audiomix: Extend the driver usage reset: imx8mp-audiomix: Switch to using regmap API reset: imx8mp-audiomix: Drop unneeded macros soc: fsl: qe: qe_ports_ic: Consolidate chained IRQ handler install/remove soc: mediatek: mtk-cmdq: Add mminfra_offset adjustment for DRAM addresses soc: mediatek: mtk-cmdq: Extend cmdq_pkt_write API for SoCs without subsys ID soc: mediatek: mtk-cmdq: Add pa_base parsing for hardware without subsys ID support soc: mediatek: mtk-cmdq: Add cmdq_get_mbox_priv() in cmdq_pkt_create() mailbox: mtk-cmdq: Add driver data to support for MT8196 mailbox: mtk-cmdq: Add mminfra_offset configuration for DRAM transaction ...
2026-01-29Merge tag 'mtk-soc-for-v6.20' of ↵Arnd Bergmann1-0/+93
https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/drivers MediaTek soc driver updates This adds: - A socinfo entry for the MT8371 Genio 520 SoC - Support for the Dynamic Voltage and Frequency Scaling Resource Controller (DVFSRC) version 4, found in the new MediaTek Kompanio Ultra (MT8196) SoC - Initial support for the CMDQ mailbox found in the MT8196. - A memory leak fix in the MediaTek SVS driver's debug ops. * tag 'mtk-soc-for-v6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux: soc: mediatek: mtk-cmdq: Add mminfra_offset adjustment for DRAM addresses soc: mediatek: mtk-cmdq: Extend cmdq_pkt_write API for SoCs without subsys ID soc: mediatek: mtk-cmdq: Add pa_base parsing for hardware without subsys ID support soc: mediatek: mtk-cmdq: Add cmdq_get_mbox_priv() in cmdq_pkt_create() mailbox: mtk-cmdq: Add driver data to support for MT8196 mailbox: mtk-cmdq: Add mminfra_offset configuration for DRAM transaction mailbox: mtk-cmdq: Add GCE hardware virtualization configuration mailbox: mtk-cmdq: Add cmdq private data to cmdq_pkt for generating instruction soc: mediatek: mtk-dvfsrc: Rework bandwidth calculations soc: mediatek: mtk-dvfsrc: Get and Enable DVFSRC clock soc: mediatek: mtk-dvfsrc: Add support for DVFSRCv4 and MT8196 soc: mediatek: mtk-dvfsrc: Write bandwidth to EMI DDR if present soc: mediatek: mtk-dvfsrc: Add a new callback for calc_dram_bw soc: mediatek: mtk-dvfsrc: Add and propagate DVFSRC bandwidth type soc: mediatek: mtk-dvfsrc: Change error check for DVFSRCv4 START cmd dt-bindings: soc: mediatek: dvfsrc: Document clock soc: mediatek: mtk-socinfo: Add entry for MT8371AV/AZA Genio 520 soc: mediatek: svs: Fix memory leak in svs_enable_debug_write() Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2026-01-29Merge tag 'apple-soc-drivers-6.20' of ↵Arnd Bergmann1-0/+7
https://git.kernel.org/pub/scm/linux/kernel/git/sven/linux into soc/drivers Apple SoC driver updates for 6.20 - Add a poweroff function to the RTKit library which will be required for the first USB4/Thunderbolt series I hope to submit next cycle. * tag 'apple-soc-drivers-6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/sven/linux: soc: apple: rtkit: Add function to poweroff Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2026-01-20ASoC: renesas: rz-ssi: CleanupsMark Brown1-2/+2
Merge series from Claudiu <claudiu.beznea@tuxon.dev>: This series adds cleanups for the Renesas RZ SSI driver.
2026-01-19soc: mediatek: mtk-cmdq: Extend cmdq_pkt_write API for SoCs without subsys IDJason-JH Lin1-0/+90
This patch extends the cmdq_pkt_write API to support SoCs that do not have subsys ID mapping by introducing new register write APIs: - cmdq_pkt_write_pa() and cmdq_pkt_write_subsys() replace cmdq_pkt_write() - cmdq_pkt_write_mask_pa() and cmdq_pkt_write_mask_subsys() replace cmdq_pkt_write_mask() To ensure consistent function pointer interfaces, both cmdq_pkt_write_pa() and cmdq_pkt_write_subsys() provide subsys and pa_base parameters. This unifies how register writes are invoked, regardless of whether subsys ID is supported by the device. All GCEs support writing registers by PA (with mask) without subsys, but this requires extra GCE instructions to convert the PA into a GCE readable format, reducing performance compared to using subsys directly. Therefore, subsys is preferred for register writes when available. API documentation and function pointer declarations in cmdq_client_reg have been updated. The original write APIs will be removed after all CMDQ users transition to the new interfaces. Signed-off-by: Jason-JH Lin <jason-jh.lin@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Acked-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
2026-01-19soc: mediatek: mtk-cmdq: Add pa_base parsing for hardware without subsys ID ↵Jason-JH Lin1-0/+3
support When GCE executes instructions, it typically locates the corresponding hardware register using the subsys ID. For hardware that does not support subsys ID, the subsys ID is set to an invalid value, and the physical address must be used to generate GCE instructions. The main advantage of using subsys ID is to reduce the number of instructions. Without subsys ID, an additional `ASSIGN` instruction is needed to assign the high bytes of the physical address, which can impact performance if too many instructions are required. However, if the hardware does not support subsys ID, using the physical address is the only option to achieve the same functionality. This commit adds a pa_base parsing flow to the cmdq_client_reg structure to handle hardware without subsys ID support. Signed-off-by: Jason-JH Lin <jason-jh.lin@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Acked-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
2026-01-18soc: apple: rtkit: Add function to poweroffSven Peter1-0/+7
Add a function to put a co-processor into the lowest possible power state from which recovery usually isn't possible without a full SoC reset. This is required for the USB4/Thunderbolt co-processors which can be restarted since the entire USB4 root complex can be completely reset independently of the rest of the SoC. Reviewed-by: Janne Grunau <j@jannau.net> Link: https://patch.msgid.link/20260117-apple-rtkit-poweroff-v2-1-b882a180e44d@kernel.org Signed-off-by: Sven Peter <sven@kernel.org>
2026-01-15soc: qcom: ubwc: add missing includeDmitry Baryshkov1-0/+1
The header has a function which calls pr_err(). Don't require users of the header to include <linux/printk.h> and include it here. Fixes: 87cfc79dcd60 ("drm/msm/a6xx: Resolve the meaning of UBWC_MODE") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Link: https://lore.kernel.org/r/20260110-iris-ubwc-v1-1-dd70494dcd7b@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2026-01-14sound: codecs: tlv320adcx140: assorted patchesMark Brown1-4/+4
Merge series from Sascha Hauer <s.hauer@pengutronix.de>: These are some patches for the tlv320adcx140 codec we are carrying around for a while, time to upstream them.
2026-01-14Merge branch '20260105-kvmrprocv10-v10-0-022e96815380@oss.qualcomm.com' into ↵Bjorn Andersson1-11/+11
drivers-for-6.20 Merge the support for loading and managing the TrustZone-based remote processors found in the Glymur platform through a topic branch, as it's a mix of qcom-soc and remoteproc patches.
2026-01-13soc: qcom: mdtloader: Remove qcom_mdt_pas_init() from exported symbolsMukesh Ojha1-10/+0
qcom_mdt_pas_init() was previously used only by the remoteproc driver (drivers/remoteproc/qcom_q6v5_pas.c). Since that driver has now transitioned to using PAS context-based qcom_mdt_pas_load() function, making qcom_mdt_pas_init() obsolete for external use. Removes qcom_mdt_pas_init() from the list of exported symbols and make it static to limit its scope to internal use within mdtloader. Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com> Link: https://lore.kernel.org/r/20260105-kvmrprocv10-v10-7-022e96815380@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2026-01-13soc: qcom: mdtloader: Add PAS context aware qcom_mdt_pas_load() functionMukesh Ojha1-0/+10
Introduce a new PAS context-aware function, qcom_mdt_pas_load(), for remote processor drivers. This function utilizes the PAS context pointer returned from qcom_scm_pas_ctx_init() to perform firmware metadata verification and memory setup via SMC calls. The qcom_mdt_pas_load() and qcom_mdt_load() functions are largely similar, but the former is designed for clients using the PAS context-based data structure. Over time, all users of qcom_mdt_load() can be migrated to use qcom_mdt_pas_load() for consistency and improved abstraction. As the remoteproc PAS driver (qcom_q6v5_pas) has already adopted the PAS context-based approach, update it to use qcom_mdt_pas_load(). Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com> Link: https://lore.kernel.org/r/20260105-kvmrprocv10-v10-6-022e96815380@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2026-01-13remoteproc: pas: Replace metadata context with PAS context structureMukesh Ojha1-3/+3
As a superset of the existing metadata context, the PAS context structure enables both remoteproc and non-remoteproc subsystems to better support scenarios where the SoC runs with or without the Gunyah hypervisor. To reflect this, relevant SCM and metadata functions are updated to incorporate PAS context awareness and remove metadata context data structure completely. Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com> Link: https://lore.kernel.org/r/20260105-kvmrprocv10-v10-5-022e96815380@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2026-01-13net: airoha: Fix typo in airoha_ppe_setup_tc_block_cb definitionLorenzo Bianconi1-2/+2
Fix Typo in airoha_ppe_dev_setup_tc_block_cb routine definition when CONFIG_NET_AIROHA is not enabled. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202601090517.Fj6v501r-lkp@intel.com/ Fixes: f45fc18b6de04 ("net: airoha: Add airoha_ppe_dev struct definition") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://patch.msgid.link/20260109-airoha_ppe_dev_setup_tc_block_cb-typo-v1-1-282e8834a9f9@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-06net: airoha: Fix npu rx DMA definitionsLorenzo Bianconi1-4/+4
Fix typos in npu rx DMA descriptor definitions. Fixes: b3ef7bdec66fb ("net: airoha: Add airoha_offload.h header") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://patch.msgid.link/20260102-airoha-npu-dma-rx-def-fixes-v1-1-205fc6bf7d94@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-12-23phy: exynos5-usbdrd: support SS combo phy for ExynosAutov920Pritam Manohar Sutar1-0/+1
Update phy driver to enable SS combo phy for this SoC. New registers' definitions, phy ops (init/exit), and dedicated phy driver data structure are added for SS combo phy. Add these changes in the driver to support SS combo phy for this SoC. Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Pritam Manohar Sutar <pritam.sutar@samsung.com> Link: https://patch.msgid.link/20251124110453.2887437-7-pritam.sutar@samsung.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2025-12-23phy: exynos5-usbdrd: support HS phy for ExynosAutov920Pritam Manohar Sutar1-0/+2
Enable UTMI+ phy support for this SoC which is very similar to what the existing Exynos850 supports. Add required change in phy driver to support HS phy for this SoC. Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Pritam Manohar Sutar <pritam.sutar@samsung.com> Link: https://patch.msgid.link/20251124110453.2887437-3-pritam.sutar@samsung.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2025-12-23soc: apple: Add hardware tunable supportSven Peter1-0/+62
Various hardware, like the Type-C PHY or the Thunderbolt/USB4 NHI, present on Apple SoCs need machine-specific tunables passed from our bootloader m1n1 to the device tree. Add generic helpers so that we don't have to duplicate this across multiple drivers. Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io> Reviewed-by: Neal Gompa <neal@gompa.dev> Reviewed-by: Janne Grunau <j@jannau.net> Signed-off-by: Sven Peter <sven@kernel.org> Link: https://patch.msgid.link/20251214-b4-atcphy-v3-1-ba82b20e9459@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2025-12-20ASoC: qcom: Constify GPR callback response dataKrzysztof Kozlowski1-1/+1
GPR bus driver calls each GPR client callback with pointer to the GPR response packet. The callbacks are not suppose to modify that response packet, so make it a pointer to const to document that expectation explicitly. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com> Link: https://patch.msgid.link/20251130-asoc-apr-const-v1-3-d0833f3ed423@oss.qualcomm.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-12-20soc: qcom: apr: Use typedef for GPR callback memberKrzysztof Kozlowski1-1/+1
There is already a typedef for GPR callback used in 'struct pkt_router_svc', so use it also in 'struct apr_driver', because it is the same type - one is assigned to another in apr_device_probe(). Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Acked-by: Bjorn Andersson <andersson@kernel.org> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com> Link: https://patch.msgid.link/20251130-asoc-apr-const-v1-2-d0833f3ed423@oss.qualcomm.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-12-20ASoC: qcom: Constify APR callback response dataKrzysztof Kozlowski1-1/+1
APR bus driver calls each APR client callback with pointer to the APR response packet. The callbacks are not suppose to modify that response packet, so make it a pointer to const to document that expectation explicitly. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com> Link: https://patch.msgid.link/20251130-asoc-apr-const-v1-1-d0833f3ed423@oss.qualcomm.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-12-17soc: qcom: llcc-qcom: Add support for GlymurPankaj Patil1-0/+4
Add system cache table(SCT) and configs for Glymur SoC Updated the list of usecase id's to enable additional clients for Glymur Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Signed-off-by: Pankaj Patil <pankaj.patil@oss.qualcomm.com> Link: https://lore.kernel.org/r/20251211-glymur_llcc_enablement-v3-2-43457b354b0d@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-12-06Merge tag 'soc-drivers-6.19' of ↵Linus Torvalds4-8/+347
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull SoC driver updates from Arnd Bergmann: "This is the first half of the driver changes: - A treewide interface change to the "syscore" operations for power management, as a preparation for future Tegra specific changes - Reset controller updates with added drivers for LAN969x, eic770 and RZ/G3S SoCs - Protection of system controller registers on Renesas and Google SoCs, to prevent trivially triggering a system crash from e.g. debugfs access - soc_device identification updates on Nvidia, Exynos and Mediatek - debugfs support in the ST STM32 firewall driver - Minor updates for SoC drivers on AMD/Xilinx, Renesas, Allwinner, TI - Cleanups for memory controller support on Nvidia and Renesas" * tag 'soc-drivers-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (114 commits) memory: tegra186-emc: Fix missing put_bpmp Documentation: reset: Remove reset_controller_add_lookup() reset: fix BIT macro reference reset: rzg2l-usbphy-ctrl: Fix a NULL vs IS_ERR() bug in probe reset: th1520: Support reset controllers in more subsystems reset: th1520: Prepare for supporting multiple controllers dt-bindings: reset: thead,th1520-reset: Add controllers for more subsys dt-bindings: reset: thead,th1520-reset: Remove non-VO-subsystem resets reset: remove legacy reset lookup code clk: davinci: psc: drop unused reset lookup reset: rzg2l-usbphy-ctrl: Add support for RZ/G3S SoC reset: rzg2l-usbphy-ctrl: Add support for USB PWRRDY dt-bindings: reset: renesas,rzg2l-usbphy-ctrl: Document RZ/G3S support reset: eswin: Add eic7700 reset driver dt-bindings: reset: eswin: Documentation for eic7700 SoC reset: sparx5: add LAN969x support dt-bindings: reset: microchip: Add LAN969x support soc: rockchip: grf: Add select correct PWM implementation on RK3368 soc/tegra: pmc: Add USB wake events for Tegra234 amba: tegra-ahb: Fix device leak on SMMU enable ...
2025-11-25Merge tag 'qcom-drivers-for-6.19' of ↵Arnd Bergmann3-0/+12
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers Qualcomm driver updates for v6.19 Support for hardware-keymanager v1 support for wrapped keys is introduce in the ICE driver. Support for the new Kaanapali mobile platform is added to last-level cache controller, pd-mapper, and UBWC drivers. UBWC driver gains support for the Monaco and Glymur platforms. The PMIC GLINK driver is extended to handle the differences found in targets where the related firmware runs on the SoCCP. Support for running on targets without initialized SMEM is provided, by reworking the SMEM driver to differentiate between "not yet probed" and "probed but there was no SMEM". An unwanted WARN_ON() that triggered if clients asked for a SMEM item beyond the currently running system's limit, was removed, to allow new use cases to gracefully fail on old targets. The Qualcomm socinfo driver is extended with support for version 20 through 23 and support for providing version information about more than 32 remote processors. Identifiers for QCS6490 and SM8850 are also added. Additionally, a number of smaller bug fixes and cleanups in PBS, OCMEM, GSBI, TZMEM, and MDT-loader are included. * tag 'qcom-drivers-for-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (31 commits) soc: qcom: mdt_loader: rename 'firmware' parameter of qcom_mdt_load() soc: qcom: mdt_loader: merge __qcom_mdt_load() and qcom_mdt_load_no_init() soc: qcom: socinfo: Add reserve field to support future extension soc: qcom: socinfo: Add support for new fields in revision 20 dt-bindings: firmware: qcom,scm: Document SCM on Kaanapali SOC soc: qcom: socinfo: add support to extract more than 32 image versions soc: qcom: smem: drop the WARN_ON() on SMEM item validation soc: qcom: ubwc: Add config for Kaanapali soc: qcom: socinfo: Add SoC ID for QCS6490 dt-bindings: arm: qcom,ids: Add SoC ID for QCS6490 soc: qcom: ice: Add HWKM v1 support for wrapped keys soc: qcom: smem: better track SMEM uninitialized state err.h: add INIT_ERR_PTR() macro soc: qcom: smem: fix hwspinlock resource leak in probe error paths dt-bindings: soc: qcom,aoss-qmp: Document the Glymur AOSS side channel dt-bindings: soc: qcom,aoss-qmp: Document the Kaanapali AOSS channel soc: qcom: ubwc: Add QCS8300 UBWC cfg dt-bindings: firmware: qcom,scm: Document Glymur scm soc: qcom: socinfo: Add SM8850 SoC ID dt-bindings: arm: qcom,ids: Add SoC ID for SM8850 ... Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-11-24wifi: mt76: Introduce the NPU generic layerLorenzo Bianconi1-0/+1
Add the NPU generic layer in mt76 module. NPU will be used to enable traffic forward offloading between the MT76 NIC and the Airoha ethernet one available on the Airoha EN7581 SoC using Netfilter Flowtable APIs. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://patch.msgid.link/20251017-mt76-npu-devel-v2-4-ddaa90901723@kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-11-24wifi: mt76: wed: use proper wed reference in mt76 wed driver callabacksLorenzo Bianconi1-0/+1
MT7996 driver can use both wed and wed_hif2 devices to offload traffic from/to the wireless NIC. In the current codebase we assume to always use the primary wed device in wed callbacks resulting in the following crash if the hw runs wed_hif2 (e.g. 6GHz link). [ 297.455876] Unable to handle kernel read from unreadable memory at virtual address 000000000000080a [ 297.464928] Mem abort info: [ 297.467722] ESR = 0x0000000096000005 [ 297.471461] EC = 0x25: DABT (current EL), IL = 32 bits [ 297.476766] SET = 0, FnV = 0 [ 297.479809] EA = 0, S1PTW = 0 [ 297.482940] FSC = 0x05: level 1 translation fault [ 297.487809] Data abort info: [ 297.490679] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 [ 297.496156] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 297.501196] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 297.506500] user pgtable: 4k pages, 39-bit VAs, pgdp=0000000107480000 [ 297.512927] [000000000000080a] pgd=08000001097fb003, p4d=08000001097fb003, pud=08000001097fb003, pmd=0000000000000000 [ 297.523532] Internal error: Oops: 0000000096000005 [#1] SMP [ 297.715393] CPU: 2 UID: 0 PID: 45 Comm: kworker/u16:2 Tainted: G O 6.12.50 #0 [ 297.723908] Tainted: [O]=OOT_MODULE [ 297.727384] Hardware name: Banana Pi BPI-R4 (2x SFP+) (DT) [ 297.732857] Workqueue: nf_ft_offload_del nf_flow_rule_route_ipv6 [nf_flow_table] [ 297.740254] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 297.747205] pc : mt76_wed_offload_disable+0x64/0xa0 [mt76] [ 297.752688] lr : mtk_wed_flow_remove+0x58/0x80 [ 297.757126] sp : ffffffc080fe3ae0 [ 297.760430] x29: ffffffc080fe3ae0 x28: ffffffc080fe3be0 x27: 00000000deadbef7 [ 297.767557] x26: ffffff80c5ebca00 x25: 0000000000000001 x24: ffffff80c85f4c00 [ 297.774683] x23: ffffff80c1875b78 x22: ffffffc080d42cd0 x21: ffffffc080660018 [ 297.781809] x20: ffffff80c6a076d0 x19: ffffff80c6a043c8 x18: 0000000000000000 [ 297.788935] x17: 0000000000000000 x16: 0000000000000001 x15: 0000000000000000 [ 297.796060] x14: 0000000000000019 x13: ffffff80c0ad8ec0 x12: 00000000fa83b2da [ 297.803185] x11: ffffff80c02700c0 x10: ffffff80c0ad8ec0 x9 : ffffff81fef96200 [ 297.810311] x8 : ffffff80c02700c0 x7 : ffffff80c02700d0 x6 : 0000000000000002 [ 297.817435] x5 : 0000000000000400 x4 : 0000000000000000 x3 : 0000000000000000 [ 297.824561] x2 : 0000000000000001 x1 : 0000000000000800 x0 : ffffff80c6a063c8 [ 297.831686] Call trace: [ 297.834123] mt76_wed_offload_disable+0x64/0xa0 [mt76] [ 297.839254] mtk_wed_flow_remove+0x58/0x80 [ 297.843342] mtk_flow_offload_cmd+0x434/0x574 [ 297.847689] mtk_wed_setup_tc_block_cb+0x30/0x40 [ 297.852295] nf_flow_offload_ipv6_hook+0x7f4/0x964 [nf_flow_table] [ 297.858466] nf_flow_rule_route_ipv6+0x438/0x4a4 [nf_flow_table] [ 297.864463] process_one_work+0x174/0x300 [ 297.868465] worker_thread+0x278/0x430 [ 297.872204] kthread+0xd8/0xdc [ 297.875251] ret_from_fork+0x10/0x20 [ 297.878820] Code: 928b5ae0 8b000273 91400a60 f943fa61 (79401421) [ 297.884901] ---[ end trace 0000000000000000 ]--- Fix the issue detecting the proper wed reference to use running wed callabacks. Fixes: 83eafc9251d6 ("wifi: mt76: mt7996: add wed tx support") Tested-by: Daniel Pawlik <pawlik.dan@gmail.com> Tested-by: Matteo Croce <teknoraver@meta.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://patch.msgid.link/20251008-wed-fixes-v1-1-8f7678583385@kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-11-06soc: qcom: socinfo: Add reserve field to support future extensionMukesh Ojha1-0/+2
Some of the new field added to socinfo structure with version 21, 22 and 23 which is only used by boot firmware and it is of no use for Linux.Add reserve field in socinfo so that the structure remain updated and prepared if we get any new field in future which could be used by Linux. While at it, also updates switch case for backward compatibility if the SoC runs with boot firmware which has these new version added. Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com> Link: https://lore.kernel.org/r/20251104130906.167666-2-mukesh.ojha@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-11-06soc: qcom: socinfo: Add support for new fields in revision 20Mukesh Ojha1-0/+2
Add support for socinfo version 20. Version 20 adds a new field package id and its zeroth bit contain information that can be can be used to tune temperature thresholds on devices which might be able to withstand higher temperatures. Zeroth bit value 1 means that its heat dissipation is better and more relaxed thermal scheme can be put in place and 0 means a more aggressive scheme may be needed. Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com> Link: https://lore.kernel.org/r/20251104130906.167666-1-mukesh.ojha@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-11-04soc: qcom: ubwc: Add config for KaanapaliAkhil P Oommen1-0/+1
Add the ubwc configuration for Kaanapali chipset. This chipset brings support for UBWC v6 version. The rest of the configurations remains as usual. Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/r/20250930-kaana-gpu-support-v1-1-73530b0700ed@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-10-23soc: qcom: llcc-qcom: Add support for KaanapaliJingyi Wang1-0/+7
Add system cache table and configs for Kaanapali SoC. Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Link: https://lore.kernel.org/r/20250924-knp-llcc-v1-2-ae6a016e5138@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-10-18soc: samsung: gs101-pmu: implement access tables for read and writeAndré Draszik1-8/+335
Accessing non-existent PMU registers causes an SError, halting the system. Implement read and write access tables for the gs101-PMU to specify which registers are read- and/or writable to avoid that SError. Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org> Signed-off-by: André Draszik <andre.draszik@linaro.org> Link: https://patch.msgid.link/20251009-gs101-pmu-regmap-tables-v2-3-2d64f5261952@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2025-10-03Merge tag 'net-next-6.18' of ↵Linus Torvalds2-1/+317
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Paolo Abeni: "Core & protocols: - Improve drop account scalability on NUMA hosts for RAW and UDP sockets and the backlog, almost doubling the Pps capacity under DoS - Optimize the UDP RX performance under stress, reducing contention, revisiting the binary layout of the involved data structs and implementing NUMA-aware locking. This improves UDP RX performance by an additional 50%, even more under extreme conditions - Add support for PSP encryption of TCP connections; this mechanism has some similarities with IPsec and TLS, but offers superior HW offloads capabilities - Ongoing work to support Accurate ECN for TCP. AccECN allows more than one congestion notification signal per RTT and is a building block for Low Latency, Low Loss, and Scalable Throughput (L4S) - Reorganize the TCP socket binary layout for data locality, reducing the number of touched cachelines in the fastpath - Refactor skb deferral free to better scale on large multi-NUMA hosts, this improves TCP and UDP RX performances significantly on such HW - Increase the default socket memory buffer limits from 256K to 4M to better fit modern link speeds - Improve handling of setups with a large number of nexthop, making dump operating scaling linearly and avoiding unneeded synchronize_rcu() on delete - Improve bridge handling of VLAN FDB, storing a single entry per bridge instead of one entry per port; this makes the dump order of magnitude faster on large switches - Restore IP ID correctly for encapsulated packets at GSO segmentation time, allowing GRO to merge packets in more scenarios - Improve netfilter matching performance on large sets - Improve MPTCP receive path performance by leveraging recently introduced core infrastructure (skb deferral free) and adopting recent TCP autotuning changes - Allow bridges to redirect to a backup port when the bridge port is administratively down - Introduce MPTCP 'laminar' endpoint that con be used only once per connection and simplify common MPTCP setups - Add RCU safety to dst->dev, closing a lot of possible races - A significant crypto library API for SCTP, MPTCP and IPv6 SR, reducing code duplication - Supports pulling data from an skb frag into the linear area of an XDP buffer Things we sprinkled into general kernel code: - Generate netlink documentation from YAML using an integrated YAML parser Driver API: - Support using IPv6 Flow Label in Rx hash computation and RSS queue selection - Introduce API for fetching the DMA device for a given queue, allowing TCP zerocopy RX on more H/W setups - Make XDP helpers compatible with unreadable memory, allowing more easily building DevMem-enabled drivers with a unified XDP/skbs datapath - Add a new dedicated ethtool callback enabling drivers to provide the number of RX rings directly, improving efficiency and clarity in RX ring queries and RSS configuration - Introduce a burst period for the health reporter, allowing better handling of multiple errors due to the same root cause - Support for DPLL phase offset exponential moving average, controlling the average smoothing factor Device drivers: - Add a new Huawei driver for 3rd gen NIC (hinic3) - Add a new SpacemiT driver for K1 ethernet MAC - Add a generic abstraction for shared memory communication devices (dibps) - Ethernet high-speed NICs: - nVidia/Mellanox: - Use multiple per-queue doorbell, to avoid MMIO contention issues - support adjacent functions, allowing them to delegate their SR-IOV VFs to sibling PFs - support RSS for IPSec offload - support exposing raw cycle counters in PTP and mlx5 - support for disabling host PFs. - Intel (100G, ice, idpf): - ice: support for SRIOV VFs over an Active-Active link aggregate - ice: support for firmware logging via debugfs - ice: support for Earliest TxTime First (ETF) hardware offload - idpf: support basic XDP functionalities and XSk - Broadcom (bnxt): - support Hyper-V VF ID - dynamic SRIOV resource allocations for RoCE - Meta (fbnic): - support queue API, zero-copy Rx and Tx - support basic XDP functionalities - devlink health support for FW crashes and OTP mem corruptions - expand hardware stats coverage to FEC, PHY, and Pause - Wangxun: - support ethtool coalesce options - support for multiple RSS contexts - Ethernet virtual: - Macsec: - replace custom netlink attribute checks with policy-level checks - Bonding: - support aggregator selection based on port priority - Microsoft vNIC: - use page pool fragments for RX buffers instead of full pages to improve memory efficiency - Ethernet NICs consumer, and embedded: - Qualcomm: support Ethernet function for IPQ9574 SoC - Airoha: implement wlan offloading via NPU - Freescale - enetc: add NETC timer PTP driver and add PTP support - fec: enable the Jumbo frame support for i.MX8QM - Renesas (R-Car S4): - support HW offloading for layer 2 switching - support for RZ/{T2H, N2H} SoCs - Cadence (macb): support TAPRIO traffic scheduling - TI: - support for Gigabit ICSS ethernet SoC (icssm-prueth) - Synopsys (stmmac): a lot of cleanups - Ethernet PHYs: - Support 10g-qxgmi phy-mode for AQR412C, Felix DSA and Lynx PCS driver - Support bcm63268 GPHY power control - Support for Micrel lan8842 PHY and PTP - Support for Aquantia AQR412 and AQR115 - CAN: - a large CAN-XL preparation work - reorganize raw_sock and uniqframe struct to minimize memory usage - rcar_canfd: update the CAN-FD handling - WiFi: - extended Neighbor Awareness Networking (NAN) support - S1G channel representation cleanup - improve S1G support - WiFi drivers: - Intel (iwlwifi): - major refactor and cleanup - Broadcom (brcm80211): - support for AP isolation - RealTek (rtw88/89) rtw88/89: - preparation work for RTL8922DE support - MediaTek (mt76): - HW restart improvements - MLO support - Qualcomm/Atheros (ath10k): - GTK rekey fixes - Bluetooth drivers: - btusb: support for several new IDs for MT7925 - btintel: support for BlazarIW core - btintel_pcie: support for _suspend() / _resume() - btintel_pcie: support for Scorpious, Panther Lake-H484 IDs" * tag 'net-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1536 commits) net: stmmac: Add support for Allwinner A523 GMAC200 dt-bindings: net: sun8i-emac: Add A523 GMAC200 compatible Revert "Documentation: net: add flow control guide and document ethtool API" octeontx2-pf: fix bitmap leak octeontx2-vf: fix bitmap leak net/mlx5e: Use extack in set rxfh callback net/mlx5e: Introduce mlx5e_rss_params for RSS configuration net/mlx5e: Introduce mlx5e_rss_init_params net/mlx5e: Remove unused mdev param from RSS indir init net/mlx5: Improve QoS error messages with actual depth values net/mlx5e: Prevent entering switchdev mode with inconsistent netns net/mlx5: HWS, Generalize complex matchers net/mlx5: Improve write-combining test reliability for ARM64 Grace CPUs selftests/net: add tcp_port_share to .gitignore Revert "net/mlx5e: Update and set Xon/Xoff upon MTU set" net: add NUMA awareness to skb_attempt_defer_free() net: use llist for sd->defer_list net: make softnet_data.defer_count an atomic selftests: drv-net: psp: add tests for destroying devices selftests: drv-net: psp: add test for auto-adjusting TCP MSS ...
2025-09-27net: airoha: npu: Add a NPU callback to initialize flow statsLorenzo Bianconi1-3/+4
Introduce a NPU callback to initialize flow stats and remove NPU stats initialization from airoha_npu_get routine. Add num_stats_entries to airoha_npu_ppe_stats_setup routine. This patch makes the code more readable since NPU statistic are now initialized on demand by the NPU consumer (at the moment NPU statistic are configured just by the airoha_eth driver). Moreover this patch allows the NPU consumer (PPE module) to explicitly enable/disable NPU flow stats. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250924-airoha-npu-init-stats-callback-v1-1-88bdf3c941b2@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-09-17soc: qcom: geni-se: Add support to load QUP SE Firmware via Linux subsystemViken Dadhaniya1-0/+4
In Qualcomm SoCs, firmware loading for Serial Engines (SE) within the QUP hardware has traditionally been managed by TrustZone (TZ). This restriction poses a significant challenge for developers, as it limits their ability to enable various protocols on any of the SEs from the Linux side, reducing flexibility. Load the firmware to QUP SE based on the 'firmware-name' property specified in devicetree at bootup time. Co-developed-by: Mukesh Kumar Savaliya <mukesh.savaliya@oss.qualcomm.com> Signed-off-by: Mukesh Kumar Savaliya <mukesh.savaliya@oss.qualcomm.com> Signed-off-by: Viken Dadhaniya <viken.dadhaniya@oss.qualcomm.com> Link: https://lore.kernel.org/r/20250911043256.3523057-4-viken.dadhaniya@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-08-26net: airoha: Introduce check_skb callback in ppe_dev opsLorenzo Bianconi1-0/+20
Export airoha_ppe_check_skb routine in ppe_dev ops. check_skb callback will be used by the MT76 driver in order to offload the traffic received by the wlan NIC and forwarded to the ethernet one. Add rx_wlan parameter to airoha_ppe_check_skb routine signature. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://patch.msgid.link/20250823-airoha-en7581-wlan-rx-offload-v3-3-f78600ec3ed8@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-08-26net: airoha: Add airoha_ppe_dev struct definitionLorenzo Bianconi1-0/+35
Introduce airoha_ppe_dev struct as container for PPE offload callbacks consumed by the MT76 driver during flowtable offload for traffic received by the wlan NIC and forwarded to the wired one. Add airoha_ppe_setup_tc_block_cb routine to PPE offload ops for MT76 driver. Rely on airoha_ppe_dev pointer in airoha_ppe_setup_tc_block_cb signature. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://patch.msgid.link/20250823-airoha-en7581-wlan-rx-offload-v3-2-f78600ec3ed8@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-08-14net: mediatek: wed: Introduce MT7992 WED support to MT7988 SoCLorenzo Bianconi1-1/+1
Introduce the second WDMA RX ring in WED driver for MT7988 SoC since the Mediatek MT7992 WiFi chipset supports two separated WDMA rings. Add missing MT7988 configurations to properly support WED for MT7992 in MT76 driver. Co-developed-by: Rex Lu <rex.lu@mediatek.com> Signed-off-by: Rex Lu <rex.lu@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://patch.msgid.link/20250812-mt7992-wed-support-v3-1-9ada78a819a4@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-08-13net: airoha: Add airoha_offload.h headerLorenzo Bianconi1-0/+260
Move NPU definitions to airoha_offload.h in include/linux/soc/airoha/ in order to allow the MT76 driver to access the callback definitions. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://patch.msgid.link/20250811-airoha-en7581-wlan-offlaod-v7-7-58823603bb4e@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-08-11soc: qcom: mdt_loader: Remove pas id parameterMukesh Ojha1-4/+3
pas id is not used in qcom_mdt_load_no_init() and it should not be used as it is non-PAS specific function and has no relation to PAS specific mechanism. Reviewed-by: Dikshita Agarwal <quic_dikshita@quicinc.com> Acked-by: Jeff Johnson <jjohnson@kernel.org> # drivers/net/wireless/ath/ath12k/ahb.c Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Link: https://lore.kernel.org/r/20250807074311.2381713-2-mukesh.ojha@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-08-02Merge tag 'pinctrl-v6.17-1' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "Nothing stands out, apart from maybe the interesting Eswin EIC7700, a RISC-V SoC I've never seen before. Core changes: - Open code PINCTRL_FUNCTION_DESC() instead of defining a complex macro only used in one place - Add pinmux_generic_add_pinfunction() helper and use this in a few drivers New drivers: - Amlogic S7, S7D and S6 pin control support - Eswin EIC7700 pin control support - Qualcomm PMIV0104, PM7550 and Milos pin control support Because of unhelpful numbering schemes, the Qualcomm driver now needs to start to rely on SoC codenames - STM32 HDP pin control support - Mediatek MT8189 pin control support Improvements: - Switch remaining pin control drivers over to the new GPIO set callback that provides a return value - Support RSVD (reserved) pins in the STM32 driver - Move many fixed assignments over to pinctrl_desc definitions - Handle multiple TLMM regions in the Qualcomm driver" * tag 'pinctrl-v6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (105 commits) pinctrl: mediatek: Add pinctrl driver for mt8189 dt-bindings: pinctrl: mediatek: Add support for mt8189 pinctrl: aspeed-g6: Add PCIe RC PERST pin group pinctrl: ingenic: use pinmux_generic_add_pinfunction() pinctrl: keembay: use pinmux_generic_add_pinfunction() pinctrl: mediatek: moore: use pinmux_generic_add_pinfunction() pinctrl: airoha: use pinmux_generic_add_pinfunction() pinctrl: equilibrium: use pinmux_generic_add_pinfunction() pinctrl: provide pinmux_generic_add_pinfunction() pinctrl: pinmux: open-code PINCTRL_FUNCTION_DESC() pinctrl: ma35: use new GPIO line value setter callbacks MAINTAINERS: add Clément Le Goffic as STM32 HDP maintainer pinctrl: stm32: Introduce HDP driver dt-bindings: pinctrl: stm32: Introduce HDP pinctrl: qcom: Add Milos pinctrl driver dt-bindings: pinctrl: document the Milos Top Level Mode Multiplexer pinctrl: qcom: spmi: Add PM7550 dt-bindings: pinctrl: qcom,pmic-gpio: Add PM7550 support pinctrl: qcom: spmi: Add PMIV0104 dt-bindings: pinctrl: qcom,pmic-gpio: Add PMIV0104 support ...
2025-08-01Merge tag 'phy-for-6.17' of ↵Linus Torvalds1-0/+8
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy Pull phy updates from Vinod Koul: "New Support: - Qualcomm Milos Synopsys eUSB2 PHY, SM8750 QMP phy support, M31 eUSB2 PHY driver - Samsung Exynos990 usbdrd phy, Exynos7870 MIPI phy support - Renesas RZ/V2N usb2-phy support Updates: - Bulk Yaml binding conversion By Rob H (too many to be listed) - cadence: Sierra PCIe, USB PHY multilink configuration support - Qualcomm refactoring of UFS PHY reset and UFS driver support for phy calibrate API" * tag 'phy-for-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (74 commits) phy: qcom: phy-qcom-m31: Update IPQ5332 M31 USB phy initialization sequence dt-bindings: phy: Convert brcm,sr-usb-combo-phy to DT schema dt-bindings: phy: Convert ti,da830-usb-phy to DT schema dt-bindings: phy: marvell,mmp2-usb-phy: Drop status from the example dt-bindings: phy: mixel, mipi-dsi-phy: Allow assigned-clock* properties phy: exynos-mipi-video: correct cam0 sysreg property name for exynos7870 phy: qcom: phy-qcom-snps-eusb2: Update init sequence per HPG 1.0.2 phy: qcom: phy-qcom-snps-eusb2: Add missing write from init sequence dt-bindings: phy: qcom,snps-eusb2: document the Milos Synopsys eUSB2 PHY dt-bindings: usb: qcom,snps-dwc3: Add Milos compatible phy: rockchip-pcie: Properly disable TEST_WRITE strobe signal phy: rockchip-pcie: Enable all four lanes if required dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Update pcie phy bindings for QCS615 phy: qcom: qmp-combo: Add missing PLL (VCO) configuration on SM8750 phy: qcom: m31-eusb2: drop registration printk phy: qcom: m31-eusb2: fix match data santity check phy: qcom: qmp-pcie: Update PHY settings for QCS8300 & SA8775P phy: qualcomm: phy-qcom-eusb2-repeater: Don't zero-out registers dt-bindings: phy: qcom,snps-eusb2-repeater: Remove default tuning values phy: mediatek: tphy: Cleanup and document slew calibration ...
2025-07-31Merge tag 'drm-next-2025-07-30' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds1-0/+75
Pull drm updates from Dave Airlie: "Highlights: - Intel xe enable Panthor Lake, started adding WildCat Lake - amdgpu has a bunch of reset improvments along with the usual IP updates - msm got VM_BIND support which is important for vulkan sparse memory - more drm_panic users - gpusvm common code to handle a bunch of core SVM work outside drivers. Detail summary: Changes outside drm subdirectory: - 'shrink_shmem_memory()' for better shmem/hibernate interaction - Rust support infrastructure: - make ETIMEDOUT available - add size constants up to SZ_2G - add DMA coherent allocation bindings - mtd driver for Intel GPU non-volatile storage - i2c designware quirk for Intel xe core: - atomic helpers: tune enable/disable sequences - add task info to wedge API - refactor EDID quirks - connector: move HDR sink to drm_display_info - fourcc: half-float and 32-bit float formats - mode_config: pass format info to simplify dma-buf: - heaps: Give CMA heap a stable name ci: - add device tree validation and kunit displayport: - change AUX DPCD access probe address - add quirk for DPCD probe - add panel replay definitions - backlight control helpers fbdev: - make CONFIG_FIRMWARE_EDID available on all arches fence: - fix UAF issues format-helper: - improve tests gpusvm: - introduce devmem only flag for allocation - add timeslicing support to GPU SVM ttm: - improve eviction sched: - tracing improvements - kunit improvements - memory leak fixes - reset handling improvements color mgmt: - add hardware gamma LUT handling helpers bridge: - add destroy hook - switch to reference counted drm_bridge allocations - tc358767: convert to devm_drm_bridge_alloc - improve CEC handling panel: - switch to reference counter drm_panel allocations - fwnode panel lookup - Huiling hl055fhv028c support - Raspberry Pi 7" 720x1280 support - edp: KDC KD116N3730A05, N160JCE-ELL CMN, N116BCJ-EAK - simple: AUO P238HAN01 - st7701: Winstar wf40eswaa6mnn0 - visionox: rm69299-shift - Renesas R61307, Renesas R69328 support - DJN HX83112B hdmi: - add CEC handling - YUV420 output support xe: - WildCat Lake support - Enable PanthorLake by default - mark BMG as SRIOV capable - update firmware recommendations - Expose media OA units - aux-bux support for non-volatile memory - MTD intel-dg driver for non-volatile memory - Expose fan control and voltage regulator in sysfs - restructure migration for multi-device - Restore GuC submit UAF fix - make GEM shrinker drm managed - SRIOV VF Post-migration recovery of GGTT nodes - W/A additions/reworks - Prefetch support for svm ranges - Don't allocate managed BO for each policy change - HWMON fixes for BMG - Create LRC BO without VM - PCI ID updates - make SLPC debugfs files optional - rework eviction rejection of bound external BOs - consolidate PAT programming logic for pre/post Xe2 - init changes for flicker-free boot - Enable GuC Dynamic Inhibit Context switch i915: - drm_panic support for i915/xe - initial flip queue off by default for LNL/PNL - Wildcat Lake Display support - Support for DSC fractional link bpp - Support for simultaneous Panel Replay and Adaptive sync - Support for PTL+ double buffer LUT - initial PIPEDMC event handling - drm_panel_follower support - DPLL interface renames - allocate struct intel_display dynamically - flip queue preperation - abstract DRAM detection better - avoid GuC scheduling stalls - remove DG1 force probe requirement - fix MEI interrupt handler on RT kernels - use backlight control helpers for eDP - more shared display code refactoring amdgpu: - add userq slot to INFO ioctl - SR-IOV hibernation support - Suspend improvements - Backlight improvements - Use scaling for non-native eDP modes - cleaner shader updates for GC 9.x - Remove fence slab - SDMA fw checks for userq support - RAS updates - DMCUB updates - DP tunneling fixes - Display idle D3 support - Per queue reset improvements - initial smartmux support amdkfd: - enable KFD on loongarch - mtype fix for ext coherent system memory radeon: - CS validation additional GL extensions - drop console lock during suspend/resume - bump driver version msm: - VM BIND support - CI: infrastructure updates - UBWC single source of truth - decouple GPU and KMS support - DP: rework I/O accessors - DPU: SM8750 support - DSI: SM8750 support - GPU: X1-45 support and speedbin support for X1-85 - MDSS: SM8750 support nova: - register! macro improvements - DMA object abstraction - VBIOS parser + fwsec lookup - sysmem flush page support - falcon: generic falcon boot code and HAL - FWSEC-FRTS: fb setup and load/execute ivpu: - Add Wildcat Lake support - Add turbo flag ast: - improve hardware generations implementation imx: - IMX8qxq Display Controller support lima: - Rockchip RK3528 GPU support nouveau: - fence handling cleanup panfrost: - MT8370 support - bo labeling - 64-bit register access qaic: - add RAS support rockchip: - convert inno_hdmi to a bridge rz-du: - add RZ/V2H(P) support - MIPI-DSI DCS support sitronix: - ST7567 support sun4i: - add H616 support tidss: - add TI AM62L support - AM65x OLDI bridge support bochs: - drm panic support vkms: - YUV and R* format support - use faux device vmwgfx: - fence improvements hyperv: - move out of simple - add drm_panic support" * tag 'drm-next-2025-07-30' of https://gitlab.freedesktop.org/drm/kernel: (1479 commits) drm/tidss: oldi: convert to devm_drm_bridge_alloc() API drm/tidss: encoder: convert to devm_drm_bridge_alloc() drm/amdgpu: move reset support type checks into the caller drm/amdgpu/sdma7: re-emit unprocessed state on ring reset drm/amdgpu/sdma6: re-emit unprocessed state on ring reset drm/amdgpu/sdma5.2: re-emit unprocessed state on ring reset drm/amdgpu/sdma5: re-emit unprocessed state on ring reset drm/amdgpu/gfx12: re-emit unprocessed state on ring reset drm/amdgpu/gfx11: re-emit unprocessed state on ring reset drm/amdgpu/gfx10: re-emit unprocessed state on ring reset drm/amdgpu/gfx9.4.3: re-emit unprocessed state on kcq reset drm/amdgpu/gfx9: re-emit unprocessed state on kcq reset drm/amdgpu: Add WARN_ON to the resource clear function drm/amd/pm: Use cached metrics data on SMUv13.0.6 drm/amd/pm: Use cached data for min/max clocks gpu: nova-core: fix bounds check in PmuLookupTableEntry::new drm/amdgpu: Replace HQD terminology with slots naming drm/amdgpu: Add user queue instance count in HW IP info drm/amd/amdgpu: Add helper functions for isp buffers drm/amd/amdgpu: Initialize swnode for ISP MFD device ...
2025-07-30Merge tag 'net-next-6.17' of ↵Linus Torvalds1-0/+25
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core & protocols: - Wrap datapath globals into net_aligned_data, to avoid false sharing - Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container) - Add SO_INQ and SCM_INQ support to AF_UNIX - Add SIOCINQ support to AF_VSOCK - Add TCP_MAXSEG sockopt to MPTCP - Add IPv6 force_forwarding sysctl to enable forwarding per interface - Make TCP validation of whether packet fully fits in the receive window and the rcv_buf more strict. With increased use of HW aggregation a single "packet" can be multiple 100s of kB - Add MSG_MORE flag to optimize large TCP transmissions via sockmap, improves latency up to 33% for sockmap users - Convert TCP send queue handling from tasklet to BH workque - Improve BPF iteration over TCP sockets to see each socket exactly once - Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code - Support enabling kernel threads for NAPI processing on per-NAPI instance basis rather than a whole device. Fully stop the kernel NAPI thread when threaded NAPI gets disabled. Previously thread would stick around until ifdown due to tricky synchronization - Allow multicast routing to take effect on locally-generated packets - Add output interface argument for End.X in segment routing - MCTP: add support for gateway routing, improve bind() handling - Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink - Add a new neighbor flag ("extern_valid"), which cedes refresh responsibilities to userspace. This is needed for EVPN multi-homing where a neighbor entry for a multi-homed host needs to be synced across all the VTEPs among which the host is multi-homed - Support NUD_PERMANENT for proxy neighbor entries - Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM - Add sequence numbers to netconsole messages. Unregister netconsole's console when all net targets are removed. Code refactoring. Add a number of selftests - Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol should be used for an inbound SA lookup - Support inspecting ref_tracker state via DebugFS - Don't force bonding advertisement frames tx to ~333 ms boundaries. Add broadcast_neighbor option to send ARP/ND on all bonded links - Allow providing upcall pid for the 'execute' command in openvswitch - Remove DCCP support from Netfilter's conntrack - Disallow multiple packet duplications in the queuing layer - Prevent use of deprecated iptables code on PREEMPT_RT Driver API: - Support RSS and hashing configuration over ethtool Netlink - Add dedicated ethtool callbacks for getting and setting hashing fields - Add support for power budget evaluation strategy in PSE / Power-over-Ethernet. Generate Netlink events for overcurrent etc - Support DPLL phase offset monitoring across all device inputs. Support providing clock reference and SYNC over separate DPLL inputs - Support traffic classes in devlink rate API for bandwidth management - Remove rtnl_lock dependency from UDP tunnel port configuration Device drivers: - Add a new Broadcom driver for 800G Ethernet (bnge) - Add a standalone driver for Microchip ZL3073x DPLL - Remove IBM's NETIUCV device driver - Ethernet high-speed NICs: - Broadcom (bnxt): - support zero-copy Tx of DMABUF memory - take page size into account for page pool recycling rings - Intel (100G, ice, idpf): - idpf: XDP and AF_XDP support preparations - idpf: add flow steering - add link_down_events statistic - clean up the TSPLL code - preparations for live VM migration - nVidia/Mellanox: - support zero-copy Rx/Tx interfaces (DMABUF and io_uring) - optimize context memory usage for matchers - expose serial numbers in devlink info - support PCIe congestion metrics - Meta (fbnic): - add 25G, 50G, and 100G link modes to phylink - support dumping FW logs - Marvell/Cavium: - support for CN20K generation of the Octeon chips - Amazon: - add HW clock (without timestamping, just hypervisor time access) - Ethernet virtual: - VirtIO net: - support segmentation of UDP-tunnel-encapsulated packets - Google (gve): - support packet timestamping and clock synchronization - Microsoft vNIC: - add handler for device-originated servicing events - allow dynamic MSI-X vector allocation - support Tx bandwidth clamping - Ethernet NICs consumer, and embedded: - AMD: - amd-xgbe: hardware timestamping and PTP clock support - Broadcom integrated MACs (bcmgenet, bcmasp): - use napi_complete_done() return value to support NAPI polling - add support for re-starting auto-negotiation - Broadcom switches (b53): - support BCM5325 switches - add bcm63xx EPHY power control - Synopsys (stmmac): - lots of code refactoring and cleanups - TI: - icssg-prueth: read firmware-names from device tree - icssg: PRP offload support - Microchip: - lan78xx: convert to PHYLINK for improved PHY and MAC management - ksz: add KSZ8463 switch support - Intel: - support similar queue priority scheme in multi-queue and time-sensitive networking (taprio) - support packet pre-emption in both - RealTek (r8169): - enable EEE at 5Gbps on RTL8126 - Airoha: - add PPPoE offload support - MDIO bus controller for Airoha AN7583 - Ethernet PHYs: - support for the IPQ5018 internal GE PHY - micrel KSZ9477 switch-integrated PHYs: - add MDI/MDI-X control support - add RX error counters - add cable test support - add Signal Quality Indicator (SQI) reporting - dp83tg720: improve reset handling and reduce link recovery time - support bcm54811 (and its MII-Lite interface type) - air_en8811h: support resume/suspend - support PHY counters for QCA807x and QCA808x - support WoL for QCA807x - CAN drivers: - rcar_canfd: support for Transceiver Delay Compensation - kvaser: report FW versions via devlink dev info - WiFi: - extended regulatory info support (6 GHz) - add statistics and beacon monitor for Multi-Link Operation (MLO) - support S1G aggregation, improve S1G support - add Radio Measurement action fields - support per-radio RTS threshold - some work around how FIPS affects wifi, which was wrong (RC4 is used by TKIP, not only WEP) - improvements for unsolicited probe response handling - WiFi drivers: - RealTek (rtw88): - IBSS mode for SDIO devices - RealTek (rtw89): - BT coexistence for MLO/WiFi7 - concurrent station + P2P support - support for USB devices RTL8851BU/RTL8852BU - Intel (iwlwifi): - use embedded PNVM in (to be released) FW images to fix compatibility issues - many cleanups (unused FW APIs, PCIe code, WoWLAN) - some FIPS interoperability - MediaTek (mt76): - firmware recovery improvements - more MLO work - Qualcomm/Atheros (ath12k): - fix scan on multi-radio devices - more EHT/Wi-Fi 7 features - encapsulation/decapsulation offload - Broadcom (brcm80211): - support SDIO 43751 device - Bluetooth: - hci_event: add support for handling LE BIG Sync Lost event - ISO: add socket option to report packet seqnum via CMSG - ISO: support SCM_TIMESTAMPING for ISO TS - Bluetooth drivers: - intel_pcie: support Function Level Reset - nxpuart: add support for 4M baudrate - nxpuart: implement powerup sequence, reset, FW dump, and FW loading" * tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits) dpll: zl3073x: Fix build failure selftests: bpf: fix legacy netfilter options ipv6: annotate data-races around rt->fib6_nsiblings ipv6: fix possible infinite loop in fib6_info_uses_dev() ipv6: prevent infinite loop in rt6_nlmsg_size() ipv6: add a retry logic in net6_rt_notify() vrf: Drop existing dst reference in vrf_ip6_input_dst net/sched: taprio: align entry index attr validation with mqprio net: fsl_pq_mdio: use dev_err_probe selftests: rtnetlink.sh: remove esp4_offload after test vsock: remove unnecessary null check in vsock_getname() igb: xsk: solve negative overflow of nb_pkts in zerocopy mode stmmac: xsk: fix negative overflow of budget in zerocopy mode dt-bindings: ieee802154: Convert at86rf230.txt yaml format net: dsa: microchip: Disable PTP function of KSZ8463 net: dsa: microchip: Setup fiber ports for KSZ8463 net: dsa: microchip: Write switch MAC address differently for KSZ8463 net: dsa: microchip: Use different registers for KSZ8463 net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver dt-bindings: net: dsa: microchip: Add KSZ8463 switch support ...
2025-07-29Merge tag 'soc-drivers-6.17' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull SoC driver updates from Arnd Bergmann: "Changes are all over the place, but very little sticks out as noteworthy. There is a new misc driver for the Raspberry Pi 5's RP1 multifunction I/O chip, along with hooking it up to the pinctrl and clk frameworks. The reset controller and memory subsystems have mainly small updates, but there are two new reset drivers for the K230 and VC1800B SoCs, and new memory driver support for Tegra264. The ARM SMCCC and SCMI firmware drivers gain a few more features that should help them be supported across more environments. Similarly, the SoC specific firmware on Tegra and Qualcomm get minor enhancements and chip support. In the drivers/soc/ directory, the ASPEED LPC snoop driver gets an overhaul for code robustness, the Tegra and Qualcomm and NXP drivers grow to support more chips, while the Hisilicon, Mediatek and Renesas drivers see mostly janitorial fixes" * tag 'soc-drivers-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (100 commits) bus: del unnecessary init var soc: fsl: qe: convert set_multiple() to returning an integer pinctrl: rp1: use new GPIO line value setter callbacks soc: hisilicon: kunpeng_hccs: Fix incorrect log information dt-bindings: soc: qcom: qcom,pmic-glink: document Milos compatible dt-bindings: soc: qcom,aoss-qmp: document the Milos Always-On Subsystem side channel dt-bindings: firmware: qcom,scm: document Milos SCM Firmware Interface soc: qcom: socinfo: Add support to retrieve APPSBL build details soc: qcom: pmic_glink: fix OF node leak soc: qcom: spmi-pmic: add more PMIC SUBTYPE IDs soc: qcom: socinfo: Add PM7550 & PMIV0108 PMICs soc: qcom: socinfo: Add SoC IDs for SM7635 family dt-bindings: arm: qcom,ids: Add SoC IDs for SM7635 family firmware: qcom: scm: request the waitqueue irq *after* initializing SCM firmware: qcom: scm: initialize tzmem before marking SCM as available firmware: qcom: scm: take struct device as argument in SHM bridge enable firmware: qcom: scm: remove unused arguments from SHM bridge routines soc: qcom: rpmh-rsc: Add RSC version 4 support memory: tegra: Add Tegra264 MC and EMC support firmware: tegra: bpmp: Fix build failure for tegra264-only config ...
2025-07-05soc: qcom: ubwc: Add #defines for UBWC swizzle bitsKonrad Dybcio1-4/+4
Make the values a bit more meaningful. This commit is intentionally cross-subsystem to ease review, as the patchset is intended to be merged together, with a maintainer consensus. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Patchwork: https://patchwork.freedesktop.org/patch/660981/ Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
2025-07-05drm/msm/a6xx: Resolve the meaning of UBWC_MODEKonrad Dybcio1-0/+10
This bit is set iff the UBWC version is 1.0. That notably does not include QCM2290's "no UBWC". This commit is intentionally cross-subsystem to ease review, as the patchset is intended to be merged together, with a maintainer consensus. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Patchwork: https://patchwork.freedesktop.org/patch/660971/ Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
2025-07-05drm/msm: Use the central UBWC config databaseKonrad Dybcio1-1/+1
As discussed a lot in the past, the UBWC config must be coherent across a number of IP blocks (currently display and GPU, but it also may/will concern camera/video as the drivers evolve). So far, we've been trying to keep the values reasonable in each of the two drivers separately, but it really make sense to do so centrally, especially given certain fields (e.g. HBB) may need to be gathered dynamically. To reduce room for error, move to fetching the config from a central source, so that the data programmed into the hardware is consistent across all multimedia blocks that request it. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Patchwork: https://patchwork.freedesktop.org/patch/660963/ Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
2025-07-05soc: qcom: Add UBWC config providerKonrad Dybcio1-0/+65
Add a file that will serve as a single source of truth for UBWC configuration data for various multimedia blocks. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Patchwork: https://patchwork.freedesktop.org/patch/660959/ Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
generated by cgit v1.2.3 (git 2.39.0) at 2026-02-26 12:26:51 +0300