summaryrefslogtreecommitdiff
path: root/include/linux/sfp.h
AgeCommit message (Collapse)AuthorFilesLines
2019-11-21net: sfp: soft status and control supportRussell King1-0/+4
Add support for the soft status and control register, which allows TX_FAULT and RX_LOS to be monitored and TX_DISABLE to be set. We make use of this when the board does not support GPIOs for these signals. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-12net: sfp: fix sfp_bus_add_upstream() warningRussell King1-2/+2
When building with SFP disabled, the stub for sfp_bus_add_upstream() missed "inline". Add it. Fixes: 727b3668b730 ("net: sfp: rework upstream interface") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-10net: sfp: rework upstream interfaceRussell King1-8/+17
The current upstream interface is an all-or-nothing, which is sub-optimal for future changes, as it doesn't allow the upstream driver to prepare for the SFP module becoming available, as it is at boot. Switch to a find-sfp-bus, add-upstream, del-upstream, put-sfp-bus interface structure instead, which allows the upstream driver to prepare for a module being available as soon as add-upstream is called. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-16net: sfp: move fwnode parsing into sfp-bus layerRussell King1-5/+5
Rather than parsing the sfp firmware node in phylink, parse it in the sfp-bus code, so we can re-use this code for PHYs without having to duplicate the parsing. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-31net: sfp: remove sfp-bus use of netdevsRussell King1-4/+2
The sfp-bus code now no longer has any use for the network device structure, so remove its use. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-31net: sfp: add mandatory attach/detach methods for sfp busesRussell King1-0/+6
Add attach and detach methods for SFP buses, which will allow us to get rid of the netdev storage in sfp-bus. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-29net: phy: sfp: correct location of SFP standardsBaruch Siach1-1/+1
SFP standards are now available from the SNIA (Storage Networking Industry Association) website. Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-18net: phy: sfp: Add HWMON support for module sensorsAndrew Lunn1-1/+71
SFP modules can contain a number of sensors. The EEPROM also contains recommended alarm and critical values for each sensor, and indications of if these have been exceeded. Export this information via HWMON. Currently temperature, VCC, bias current, transmit power, and possibly receiver power is supported. The sensors in the modules can either return calibrate or uncalibrated values. Uncalibrated values need to be manipulated, using coefficients provided in the SFP EEPROM. Uncalibrated receive power values require floating point maths in order to calibrate them. Performing this in the kernel is hard. So if the SFP module indicates it uses uncalibrated values, RX power is not made available. With this hwmon device, it is possible to view the sensor values using lm-sensors programs: in0: +3.29 V (crit min = +2.90 V, min = +3.00 V) (max = +3.60 V, crit max = +3.70 V) temp1: +33.0°C (low = -5.0°C, high = +80.0°C) (crit low = -10.0°C, crit = +85.0°C) power1: 1000.00 nW (max = 794.00 uW, min = 50.00 uW) ALARM (LCRIT) (lcrit = 40.00 uW, crit = 1000.00 uW) curr1: +0.00 A (crit min = +0.00 A, min = +0.00 A) ALARM (LCRIT, MIN) (max = +0.01 A, crit max = +0.01 A) The scaling sensors performs on the bias current is not particularly good. The raw values are more useful: curr1: curr1_input: 0.000 curr1_min: 0.002 curr1_max: 0.010 curr1_lcrit: 0.000 curr1_crit: 0.011 curr1_min_alarm: 1.000 curr1_max_alarm: 0.000 curr1_lcrit_alarm: 1.000 curr1_crit_alarm: 0.000 In order to keep the I2C overhead to a minimum, the constant values, such as limits and calibration coefficients are read once at module insertion time. Thus only reading *_input and *_alarm properties requires i2c read operations. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-28phylink,sfp: negotiate interface format with MACRussell King1-8/+10
Negotiate the interface format with the MAC rather than requiring it to be a fixed type specified solely by the SFP module. This allows modules that can work with several different interface signalling formats to select a format compatible with the MAC - for example, a Fiber module supporing Gigabit ethernet and faster connected to a Gigabit only MAC needs to select the 1000BASE-X mode. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-03sfp: improve support for direct-attach copper cablesRussell King1-1/+35
Improve the support for direct-attach copper so that we avoid kernel warning messages, and report the appropriate PORT_DA type to userspace. Direct Attach cables can use a number of protocols depending on their range of speeds. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-15sfp: add sff module supportRussell King1-0/+1
Add support for SFF modules, which are soldered down SFP modules. These have a different phys_id value, and also have the present and rate select signals omitted compared with their socketed counter-parts. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-05sfp: convert to fwnodeRussell King1-3/+4
Convert sfp-bus to use fwnode rather than device_node internally, so we can support more than just device tree firmware. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-05sfp: add documentation for kernel APIsRussell King1-14/+36
Add kernel-doc documentation for sfp kernel APIs, and link it into the networking kapi documentation under "Network device support". Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07sfp: add sfp-bus to bridge between network devices and sfp cagesRussell King1-0/+434
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>