summaryrefslogtreecommitdiff
path: root/include/linux/qcom-geni-se.h
AgeCommit message (Collapse)AuthorFilesLines
2021-08-04soc: qcom: geni: Add support for gpi dmaVinod Koul1-1/+14
GPI DMA is one of the DMA modes supported on geni, this adds support to enable that mode Also do better documentation of the enum geni_se_xfer_mode. Signed-off-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20210625052213.32260-3-vkoul@kernel.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-04soc: qcom: geni: move GENI_IF_DISABLE_RO to common headerVinod Koul1-0/+4
GENI_IF_DISABLE_RO is used by geni spi driver as well to check the status if GENI, so move this to common header qcom-geni-se.h Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20210625052213.32260-2-vkoul@kernel.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-12Merge branch 'opp/linux-next' of ↵Rafael J. Wysocki1-2/+0
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm Pull OPP (Operating Performance Points) framework updates for v5.13 from Viresh Kumar: "This adds devm variants for OPP APIs and updates few of the users as well (Yangtao Li and Dmitry Osipenko)." * 'opp/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: memory: samsung: exynos5422-dmc: Convert to use resource-managed OPP API drm/panfrost: Convert to use resource-managed OPP API drm/lima: Convert to use resource-managed OPP API mmc: sdhci-msm: Convert to use resource-managed OPP API spi: spi-qcom-qspi: Convert to use resource-managed OPP API spi: spi-geni-qcom: Convert to use resource-managed OPP API serial: qcom_geni_serial: Convert to use resource-managed OPP API opp: Change return type of devm_pm_opp_attach_genpd() opp: Change return type of devm_pm_opp_register_set_opp_helper() opp: Add devres wrapper for dev_pm_opp_of_add_table opp: Add devres wrapper for dev_pm_opp_set_supported_hw opp: Add devres wrapper for dev_pm_opp_set_regulators opp: Add devres wrapper for dev_pm_opp_set_clkname
2021-03-26soc: qcom-geni-se: Cleanup the code to remove proxy votesRoja Rani Yarubandi1-2/+0
This reverts commit 048eb908a1f2 ("soc: qcom-geni-se: Add interconnect support to fix earlycon crash") ICC core and platforms drivers supports sync_state feature, which ensures that the default ICC BW votes from the bootloader is not removed until all it's consumers are probes. The proxy votes were needed in case other QUP child drivers I2C, SPI probes before UART, they can turn off the QUP-CORE clock which is shared resources for all QUP driver, this causes unclocked access to HW from earlycon. Given above support from ICC there is no longer need to maintain proxy votes on QUP-CORE ICC node from QUP wrapper driver for early console usecase, the default votes won't be removed until real console is probed. Cc: stable@vger.kernel.org Fixes: 266cd33b5913 ("interconnect: qcom: Ensure that the floor bandwidth value is enforced") Fixes: 7d3b0b0d8184 ("interconnect: qcom: Use icc_sync_state") Signed-off-by: Roja Rani Yarubandi <rojay@codeaurora.org> Signed-off-by: Akash Asthana <akashast@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/20210324101836.25272-2-rojay@codeaurora.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-16spi: spi-geni-qcom: Convert to use resource-managed OPP APIYangtao Li1-2/+0
Use resource-managed OPP API to simplify code. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-10-28qcom-geni-se: remove has_opp_tableViresh Kumar1-2/+0
has_opp_table isn't used anymore, remove it. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Link: https://lore.kernel.org/r/08ec1ee1d4252a266956abb5f1e0e0026d753564.1603867487.git.viresh.kumar@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-10-24Merge tag 'armsoc-drivers' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC-related driver updates from Olof Johansson: "Various driver updates for platforms. A bulk of this is smaller fixes or cleanups, but some of the new material this time around is: - Support for Nvidia Tegra234 SoC - Ring accelerator support for TI AM65x - PRUSS driver for TI platforms - Renesas support for R-Car V3U SoC - Reset support for Cortex-M4 processor on i.MX8MQ There are also new socinfo entries for a handful of different SoCs and platforms" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (131 commits) drm/mediatek: reduce clear event soc: mediatek: cmdq: add clear option in cmdq_pkt_wfe api soc: mediatek: cmdq: add jump function soc: mediatek: cmdq: add write_s_mask value function soc: mediatek: cmdq: add write_s value function soc: mediatek: cmdq: add read_s function soc: mediatek: cmdq: add write_s_mask function soc: mediatek: cmdq: add write_s function soc: mediatek: cmdq: add address shift in jump soc: mediatek: mtk-infracfg: Fix kerneldoc soc: amlogic: pm-domains: use always-on flag reset: sti: reset-syscfg: fix struct description warnings reset: imx7: add the cm4 reset for i.MX8MQ dt-bindings: reset: imx8mq: add m4 reset reset: Fix and extend kerneldoc reset: reset-zynqmp: Added support for Versal platform dt-bindings: reset: Updated binding for Versal reset driver reset: imx7: Support module build soc: fsl: qe: Remove unnessesary check in ucc_set_tdm_rxtx_clk soc: fsl: qman: convert to use be32_add_cpu() ...
2020-09-30serial: qcom_geni_serial: To correct QUP Version detection logicParas Sharma1-0/+3
For QUP IP versions 2.5 and above the oversampling rate is halved from 32 to 16. Commit ce734600545f ("tty: serial: qcom_geni_serial: Update the oversampling rate") is pushed to handle this scenario. But the existing logic is failing to classify QUP Version 3.0 into the correct group ( 2.5 and above). As result Serial Engine clocks are not configured properly for baud rate and garbage data is sampled to FIFOs from the line. So, fix the logic to detect QUP with versions 2.5 and above. Fixes: ce734600545f ("tty: serial: qcom_geni_serial: Update the oversampling rate") Cc: stable <stable@vger.kernel.org> Signed-off-by: Paras Sharma <parashar@codeaurora.org> Reviewed-by: Akash Asthana <akashast@codeaurora.org> Link: https://lore.kernel.org/r/1601445926-23673-1-git-send-email-parashar@codeaurora.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-10soc: qcom-geni-se: Don't use relaxed writes when writing commandsDouglas Anderson1-2/+2
Writing the command is the final step in kicking off a transfer. Let's use writel() to ensure that any other memory accesses are done before the command kicks off. It's expected that this is mostly relevant if we're in DMA mode but since it doesn't appear to regress performance in a measurable way [1] even in PIO mode and it's easier to reason about then let's just always use it. NOTE: this patch came about due to code inspection. No actual problems were observed that this patch fixes. [1] Tested by timing "flashrom -p ec" on a Chromebook which stresses GENI SPI a lot. Reviewed-by: Mukesh Kumar Savaliya <msavaliy@codeaurora.org> Reviewed-by: Akash Asthana <akashast@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Suggested-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20200722150113.1.Ia50ab5cb8a6d3a73d302e6bdc25542d48ffd27f4@changeid Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-07-14tty: serial: qcom-geni-serial: Drop the icc bw votes in suspend for consoleRajendra Nayak1-0/+1
When using the geni-serial as console, its important to be able to hit the lowest possible power state in suspend, even with no_console_suspend. The only thing that prevents it today on platforms like the sc7180 is the interconnect BW votes, which we certainly don't need when the system is in suspend. So in the suspend handler mark them as ACTIVE_ONLY (0x3) and on resume switch them back to the ALWAYS tag (0x7) Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Reviewed-by: Akash Asthana <akashast@codeaurora.org> Tested-by: Matthias Kaehlcke <mka@chromium.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/1594704709-26072-1-git-send-email-rnayak@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-06-25tty: serial: qcom_geni_serial: Use OPP API to set clk/perf stateRajendra Nayak1-0/+4
geni serial needs to express a perforamnce state requirement on CX powerdomain depending on the frequency of the clock rates. Use OPP table from DT to register with OPP framework and use dev_pm_opp_set_rate() to set the clk/perf state. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Akash Asthana <akashast@codeaurora.org> Cc: linux-serial@vger.kernel.org Link: https://lore.kernel.org/r/1592222564-13556-2-git-send-email-rnayak@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-06-25soc: qcom-geni-se: Add interconnect support to fix earlycon crashAkash Asthana1-0/+2
QUP core clock is shared among all the SE drivers present on particular QUP wrapper, the system will reset(unclocked access) if earlycon used after QUP core clock is put to 0 from other SE drivers before real console comes up. As earlycon can't vote for it's QUP core need, to fix this add ICC support to common/QUP wrapper driver and put vote for QUP core from probe on behalf of earlycon and remove vote during earlycon exit call. Signed-off-by: Akash Asthana <akashast@codeaurora.org> Reported-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/1592908737-7068-3-git-send-email-akashast@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-06-25soc: qcom: geni: Support for ICC votingAkash Asthana1-0/+38
Add necessary macros and structure variables to support ICC BW voting from individual SE drivers. Signed-off-by: Akash Asthana <akashast@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/1592908737-7068-2-git-send-email-akashast@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-05-15treewide: remove SPDX "WITH Linux-syscall-note" from kernel-space headersMasahiro Yamada1-1/+1
The "WITH Linux-syscall-note" should be added to headers exported to the user-space. Some kernel-space headers have "WITH Linux-syscall-note", which seems a mistake. [1] arch/x86/include/asm/hyperv-tlfs.h Commit 5a4858032217 ("x86/hyper-v: move hyperv.h out of uapi") moved this file out of uapi, but missed to update the SPDX License tag. [2] include/asm-generic/shmparam.h Commit 76ce2a80a28e ("Rename include/{uapi => }/asm-generic/shmparam.h really") moved this file out of uapi, but missed to update the SPDX License tag. [3] include/linux/qcom-geni-se.h Commit eddac5af0654 ("soc: qcom: Add GENI based QUP Wrapper driver") added this file, but I do not see a good reason why its license tag must include "WITH Linux-syscall-note". Link: http://lkml.kernel.org/r/1554196104-3522-1-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-09-24soc: qcom: geni: Make version macros simplerStephen Boyd1-9/+4
This macro doesn't work, because it hides a local variable inside of the macro to hold the version and that variable name is called 'ver' and 'version' sometimes. Let's change this to be more explicit. Introduce three macros for the major, minor, and step of the version, and require callers to pass the version in to get the part of the version out. This way we don't hide local variables inside macros and things are less evil overall. Cc: Karthikeyan Ramasubramanian <kramasub@codeaurora.org> Cc: Sagar Dharia <sdharia@codeaurora.org> Cc: Girish Mahadevan <girishm@codeaurora.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-04-25soc: qcom: Add GENI based QUP Wrapper driverKarthikeyan Ramasubramanian1-0/+425
This driver manages the Generic Interface (GENI) firmware based Qualcomm Universal Peripheral (QUP) Wrapper. GENI based QUP is the next generation programmable module composed of multiple Serial Engines (SE) and supports a wide range of serial interfaces like UART, SPI, I2C, I3C, etc. This driver also enables managing the serial interface independent aspects of Serial Engines. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@codeaurora.org> Signed-off-by: Sagar Dharia <sdharia@codeaurora.org> Signed-off-by: Girish Mahadevan <girishm@codeaurora.org> Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-29 12:40:03 +0300