| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull performance event updates from Ingo Molnar:
"x86 PMU driver updates:
- Add support for the core PMU for Intel Diamond Rapids (DMR) CPUs
(Dapeng Mi)
Compared to previous iterations of the Intel PMU code, there's been
a lot of changes, which center around three main areas:
- Introduce the OFF-MODULE RESPONSE (OMR) facility to replace the
Off-Core Response (OCR) facility
- New PEBS data source encoding layout
- Support the new "RDPMC user disable" feature
- Likewise, a large series adds uncore PMU support for Intel Diamond
Rapids (DMR) CPUs (Zide Chen)
This centers around these four main areas:
- DMR may have two Integrated I/O and Memory Hub (IMH) dies,
separate from the compute tile (CBB) dies. Each CBB and each IMH
die has its own discovery domain.
- Unlike prior CPUs that retrieve the global discovery table
portal exclusively via PCI or MSR, DMR uses PCI for IMH PMON
discovery and MSR for CBB PMON discovery.
- DMR introduces several new PMON types: SCA, HAMVF, D2D_ULA, UBR,
PCIE4, CRS, CPC, ITC, OTC, CMS, and PCIE6.
- IIO free-running counters in DMR are MMIO-based, unlike SPR.
- Also add support for Add missing PMON units for Intel Panther Lake,
and support Nova Lake (NVL), which largely maps to Panther Lake.
(Zide Chen)
- KVM integration: Add support for mediated vPMUs (by Kan Liang and
Sean Christopherson, with fixes and cleanups by Peter Zijlstra,
Sandipan Das and Mingwei Zhang)
- Add Intel cstate driver to support for Wildcat Lake (WCL) CPUs,
which are a low-power variant of Panther Lake (Zide Chen)
- Add core, cstate and MSR PMU support for the Airmont NP Intel CPU
(aka MaxLinear Lightning Mountain), which maps to the existing
Airmont code (Martin Schiller)
Performance enhancements:
- Speed up kexec shutdown by avoiding unnecessary cross CPU calls
(Jan H. Schönherr)
- Fix slow perf_event_task_exit() with LBR callstacks (Namhyung Kim)
User-space stack unwinding support:
- Various cleanups and refactorings in preparation to generalize the
unwinding code for other architectures (Jens Remus)
Uprobes updates:
- Transition from kmap_atomic to kmap_local_page (Keke Ming)
- Fix incorrect lockdep condition in filter_chain() (Breno Leitao)
- Fix XOL allocation failure for 32-bit tasks (Oleg Nesterov)
Misc fixes and cleanups:
- s390: Remove kvm_types.h from Kbuild (Randy Dunlap)
- x86/intel/uncore: Convert comma to semicolon (Chen Ni)
- x86/uncore: Clean up const mismatch (Greg Kroah-Hartman)
- x86/ibs: Fix typo in dc_l2tlb_miss comment (Xiang-Bin Shi)"
* tag 'perf-core-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (58 commits)
s390: remove kvm_types.h from Kbuild
uprobes: Fix incorrect lockdep condition in filter_chain()
x86/ibs: Fix typo in dc_l2tlb_miss comment
x86/uprobes: Fix XOL allocation failure for 32-bit tasks
perf/x86/intel/uncore: Convert comma to semicolon
perf/x86/intel: Add support for rdpmc user disable feature
perf/x86: Use macros to replace magic numbers in attr_rdpmc
perf/x86/intel: Add core PMU support for Novalake
perf/x86/intel: Add support for PEBS memory auxiliary info field in NVL
perf/x86/intel: Add core PMU support for DMR
perf/x86/intel: Add support for PEBS memory auxiliary info field in DMR
perf/x86/intel: Support the 4 new OMR MSRs introduced in DMR and NVL
perf/core: Fix slow perf_event_task_exit() with LBR callstacks
perf/core: Speed up kexec shutdown by avoiding unnecessary cross CPU calls
uprobes: use kmap_local_page() for temporary page mappings
arm/uprobes: use kmap_local_page() in arch_uprobe_copy_ixol()
mips/uprobes: use kmap_local_page() in arch_uprobe_copy_ixol()
arm64/uprobes: use kmap_local_page() in arch_uprobe_copy_ixol()
riscv/uprobes: use kmap_local_page() in arch_uprobe_copy_ixol()
perf/x86/intel/uncore: Add Nova Lake support
...
|
|
In a vain attempt to consolidate the email zoo switch everything to the
kernel.org account.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Wire up system vector 0xf5 for handling PMIs (i.e. interrupts delivered
through the LVTPC) while running KVM guests with a mediated PMU. Perf
currently delivers all PMIs as NMIs, e.g. so that events that trigger while
IRQs are disabled aren't delayed and generate useless records, but due to
the multiplexing of NMIs throughout the system, correctly identifying NMIs
for a mediated PMU is practically infeasible.
To (greatly) simplify identifying guest mediated PMU PMIs, perf will
switch the CPU's LVTPC between PERF_GUEST_MEDIATED_PMI_VECTOR and NMI when
guest PMU context is loaded/put. I.e. PMIs that are generated by the CPU
while the guest is active will be identified purely based on the IRQ
vector.
Route the vector through perf, e.g. as opposed to letting KVM attach a
handler directly a la posted interrupt notification vectors, as perf owns
the LVTPC and thus is the rightful owner of PERF_GUEST_MEDIATED_PMI_VECTOR.
Functionally, having KVM directly own the vector would be fine (both KVM
and perf will be completely aware of when a mediated PMU is active), but
would lead to an undesirable split in ownership: perf would be responsible
for installing the vector, but not handling the resulting IRQs.
Add a new perf_guest_info_callbacks hook (and static call) to allow KVM to
register its handler with perf when running guests with mediated PMUs.
Note, because KVM always runs guests with host IRQs enabled, there is no
danger of a PMI being delayed from the guest's perspective due to using a
regular IRQ instead of an NMI.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Xudong Hao <xudong.hao@intel.com>
Link: https://patch.msgid.link/20251206001720.468579-9-seanjc@google.com
|
|
Add exported APIs to load/put a guest mediated PMU context. KVM will
load the guest PMU shortly before VM-Enter, and put the guest PMU shortly
after VM-Exit.
On the perf side of things, schedule out all exclude_guest events when the
guest context is loaded, and schedule them back in when the guest context
is put. I.e. yield the hardware PMU resources to the guest, by way of KVM.
Note, perf is only responsible for managing host context. KVM is
responsible for loading/storing guest state to/from hardware.
[sean: shuffle patches around, write changelog]
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Xudong Hao <xudong.hao@intel.com>
Link: https://patch.msgid.link/20251206001720.468579-8-seanjc@google.com
|
|
Current perf doesn't explicitly schedule out all exclude_guest events
while the guest is running. There is no problem with the current
emulated vPMU. Because perf owns all the PMU counters. It can mask the
counter which is assigned to an exclude_guest event when a guest is
running (Intel way), or set the corresponding HOSTONLY bit in evsentsel
(AMD way). The counter doesn't count when a guest is running.
However, either way doesn't work with the introduced mediated vPMU.
A guest owns all the PMU counters when it's running. The host should not
mask any counters. The counter may be used by the guest. The evsentsel
may be overwritten.
Perf should explicitly schedule out all exclude_guest events to release
the PMU resources when entering a guest, and resume the counting when
exiting the guest.
It's possible that an exclude_guest event is created when a guest is
running. The new event should not be scheduled in as well.
The ctx time is shared among different PMUs. The time cannot be stopped
when a guest is running. It is required to calculate the time for events
from other PMUs, e.g., uncore events. Add timeguest to track the guest
run time. For an exclude_guest event, the elapsed time equals
the ctx time - guest time.
Cgroup has dedicated times. Use the same method to deduct the guest time
from the cgroup time as well.
[sean: massage comments]
Co-developed-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Xudong Hao <xudong.hao@intel.com>
Link: https://patch.msgid.link/20251206001720.468579-7-seanjc@google.com
|
|
The current perf tracks two timestamps for the normal ctx and cgroup.
The same type of variables and similar codes are used to track the
timestamps. In the following patch, the third timestamp to track the
guest time will be introduced.
To avoid the code duplication, add a new struct perf_time_ctx and factor
out a generic function update_perf_time_ctx().
No functional change.
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Xudong Hao <xudong.hao@intel.com>
Link: https://patch.msgid.link/20251206001720.468579-6-seanjc@google.com
|
|
Currently, exposing PMU capabilities to a KVM guest is done by emulating
guest PMCs via host perf events, i.e. by having KVM be "just" another user
of perf. As a result, the guest and host are effectively competing for
resources, and emulating guest accesses to vPMU resources requires
expensive actions (expensive relative to the native instruction). The
overhead and resource competition results in degraded guest performance
and ultimately very poor vPMU accuracy.
To address the issues with the perf-emulated vPMU, introduce a "mediated
vPMU", where the data plane (PMCs and enable/disable knobs) is exposed
directly to the guest, but the control plane (event selectors and access
to fixed counters) is managed by KVM (via MSR interceptions). To allow
host perf usage of the PMU to (partially) co-exist with KVM/guest usage
of the PMU, KVM and perf will coordinate to a world switch between host
perf context and guest vPMU context near VM-Enter/VM-Exit.
Add two exported APIs, perf_{create,release}_mediated_pmu(), to allow KVM
to create and release a mediated PMU instance (per VM). Because host perf
context will be deactivated while the guest is running, mediated PMU usage
will be mutually exclusive with perf analysis of the guest, i.e. perf
events that do NOT exclude the guest will not behave as expected.
To avoid silent failure of !exclude_guest perf events, disallow creating a
mediated PMU if there are active !exclude_guest events, and on the perf
side, disallowing creating new !exclude_guest perf events while there is
at least one active mediated PMU.
Exempt PMU resources that do not support mediated PMU usage, i.e. that are
outside the scope/view of KVM's vPMU and will not be swapped out while the
guest is running.
Guard mediated PMU with a new kconfig to help readers identify code paths
that are unique to mediated PMU support, and to allow for adding arch-
specific hooks without stubs. KVM x86 is expected to be the only KVM
architecture to support a mediated PMU in the near future (e.g. arm64 is
trending toward a partitioned PMU implementation), and KVM x86 will select
PERF_GUEST_MEDIATED_PMU unconditionally, i.e. won't need stubs.
Immediately select PERF_GUEST_MEDIATED_PMU when KVM x86 is enabled so that
all paths are compile tested. Full KVM support is on its way...
[sean: add kconfig and WARNing, rewrite changelog, swizzle patch ordering]
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Xudong Hao <xudong.hao@intel.com>
Link: https://patch.msgid.link/20251206001720.468579-5-seanjc@google.com
|
|
Add support for deferred userspace unwind to perf.
Where perf currently relies on in-place stack unwinding; from NMI
context and all that. This moves the userspace part of the unwind to
right before the return-to-userspace.
This has two distinct benefits, the biggest is that it moves the
unwind to a faultable context. It becomes possible to fault in debug
info (.eh_frame, SFrame etc.) that might not otherwise be readily
available. And secondly, it de-duplicates the user callchain where
multiple samples happen during the same kernel entry.
To facilitate this the perf interface is extended with a new record
type:
PERF_RECORD_CALLCHAIN_DEFERRED
and two new attribute flags:
perf_event_attr::defer_callchain - to request the user unwind be deferred
perf_event_attr::defer_output - to request PERF_RECORD_CALLCHAIN_DEFERRED records
The existing PERF_RECORD_SAMPLE callchain section gets a new
context type:
PERF_CONTEXT_USER_DEFERRED
After which will come a single entry, denoting the 'cookie' of the
deferred callchain that should be attached here, matching the 'cookie'
field of the above mentioned PERF_RECORD_CALLCHAIN_DEFERRED.
The 'defer_callchain' flag is expected on all events with
PERF_SAMPLE_CALLCHAIN. The 'defer_output' flag is expect on the event
responsible for collecting side-band events (like mmap, comm etc.).
Setting 'defer_output' on multiple events will get you duplicated
PERF_RECORD_CALLCHAIN_DEFERRED records.
Based on earlier patches by Josh and Steven.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251023150002.GR4067720@noisy.programming.kicks-ass.net
|
|
The 'init_nr' argument has double duty: it's used to initialize both the
number of contexts and the number of stack entries. That's confusing
and the callers always pass zero anyway. Hard code the zero.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Namhyung Kim <Namhyung@kernel.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/r/20250820180428.259565081@kernel.org
|
|
The recently fixed reference count leaks could have been detected by using
refcount_t and refcount_t would have mitigated the potential overflow at
least.
Now that the code is properly structured, convert the mmap() related
mmap_count variants over to refcount_t.
No functional change intended.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Link: https://lore.kernel.org/r/20250812104020.071507932@infradead.org
|
|
Better describe the event states.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Leo Yan <leo.yan@arm.com>
Link: https://lkml.kernel.org/r/20250604135801.GK38114@noisy.programming.kicks-ass.net
|
|
Do a bit of readability spring cleaning:
- Fix misaligned structure member in perf_addr_filter: the new
struct perf_addr_filter::action member was too long, but when
it was added it was not aligned properly. Align all fields to
the customary column 41 alignment of most of the rest of the
header.
- Adjust the vertical alignment of the definition of other
structures and definitions as well, so that the 'most of' in
the previous paragraph changes to 'all of'. ;-)
- Prettify the assignments in perf_clear_branch_entry_bitfields()
- Move comments from CPP definitions to outside the macro
- Move perf_guest_info_callbacks and related defines from the front
of the header closer to where it's used within the header.
- And more #endif markers for larger CPP blocks and standardize
#if/#else/#endif blocks to the following nomenclature:
#ifdef CONFIG_FOO
...
#else /* !CONFIG_FOO: */
...
#endif /* !CONFIG_FOO */
- Standardize on consistently using the 'extern' storage class where
appropriate, we had cases where method prototypes sometimes omitted
the storage class:
extern void perf_pmu_migrate_context(struct pmu *pmu,
int src_cpu, int dst_cpu);
int perf_event_read_local(struct perf_event *event, u64 *value,
u64 *enabled, u64 *running);
extern u64 perf_event_read_value(struct perf_event *event,
u64 *enabled, u64 *running);
Which is obviously a bit confusing and adds unnecessary noise.
- s/__u64/u64 and similar cleanups: there's no point in using __u64
in non-UAPI headers, and doing so only adds unnecessary visual noise.
- Harmonize all multi-parameter function prototypes along the following
style:
extern struct perf_event *
perf_event_create_kernel_counter(struct perf_event_attr *attr,
int cpu,
struct task_struct *task,
perf_overflow_handler_t callback,
void *context);
- etc.
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
perf always allocates contiguous AUX pages based on aux_watermark.
However, this contiguous allocation doesn't benefit all PMUs. For
instance, ARM SPE and TRBE operate with virtual pages, and Coresight
ETR allocates a separate buffer. For these PMUs, allocating contiguous
AUX pages unnecessarily exacerbates memory fragmentation. This
fragmentation can prevent their use on long-running devices.
This patch modifies the perf driver to be memory-friendly by default,
by allocating non-contiguous AUX pages. For PMUs requiring contiguous
pages (Intel BTS and some Intel PT), the existing
PERF_PMU_CAP_AUX_NO_SG capability can be used. For PMUs that don't
require but can benefit from contiguous pages (some Intel PT), a new
capability, PERF_PMU_CAP_AUX_PREFER_LARGE, is added to maintain their
existing behavior.
Signed-off-by: Yabin Cui <yabinc@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: James Clark <james.clark@linaro.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20250508232642.148767-1-yabinc@google.com
|
|
The relative rates among two or more events are useful for performance
analysis, e.g., a high branch miss rate may indicate a performance
issue. Usually, the samples with a relative rate that exceeds some
threshold are more useful. However, the traditional sampling takes
samples of events separately. To get the relative rates among two or
more events, a high sample rate is required, which can bring high
overhead. Many samples taken in the non-hotspot area are also dropped
(useless) in the post-process.
The auto counter reload (ACR) feature takes samples when the relative
rate of two or more events exceeds some threshold, which provides the
fine-grained information at a low cost.
To support the feature, two sets of MSRs are introduced. For a given
counter IA32_PMC_GPn_CTR/IA32_PMC_FXm_CTR, bit fields in the
IA32_PMC_GPn_CFG_B/IA32_PMC_FXm_CFG_B MSR indicate which counter(s)
can cause a reload of that counter. The reload value is stored in the
IA32_PMC_GPn_CFG_C/IA32_PMC_FXm_CFG_C.
The details can be found at Intel SDM (085), Volume 3, 21.9.11 Auto
Counter Reload.
In the hw_config(), an ACR event is specially configured, because the
cause/reloadable counter mask has to be applied to the dyn_constraint.
Besides the HW limit, e.g., not support perf metrics, PDist and etc, a
SW limit is applied as well. ACR events in a group must be contiguous.
It facilitates the later conversion from the event idx to the counter
idx. Otherwise, the intel_pmu_acr_late_setup() has to traverse the whole
event list again to find the "cause" event.
Also, add a new flag PERF_X86_EVENT_ACR to indicate an ACR group, which
is set to the group leader.
The late setup() is also required for an ACR group. It's to convert the
event idx to the counter idx, and saved it in hw.config1.
The ACR configuration MSRs are only updated in the enable_event().
The disable_event() doesn't clear the ACR CFG register.
Add acr_cfg_b/acr_cfg_c in the struct cpu_hw_events to cache the MSR
values. It can avoid a MSR write if the value is not changed.
Expose an acr_mask to the sysfs. The perf tool can utilize the new
format to configure the relation of events in the group. The bit
sequence of the acr_mask follows the events enabled order of the group.
Example:
Here is the snippet of the mispredict.c. Since the array has a random
numbers, jumps are random and often mispredicted.
The mispredicted rate depends on the compared value.
For the Loop1, ~11% of all branches are mispredicted.
For the Loop2, ~21% of all branches are mispredicted.
main()
{
...
for (i = 0; i < N; i++)
data[i] = rand() % 256;
...
/* Loop 1 */
for (k = 0; k < 50; k++)
for (i = 0; i < N; i++)
if (data[i] >= 64)
sum += data[i];
...
...
/* Loop 2 */
for (k = 0; k < 50; k++)
for (i = 0; i < N; i++)
if (data[i] >= 128)
sum += data[i];
...
}
Usually, a code with a high branch miss rate means a bad performance.
To understand the branch miss rate of the codes, the traditional method
usually samples both branches and branch-misses events. E.g.,
perf record -e "{cpu_atom/branch-misses/ppu, cpu_atom/branch-instructions/u}"
-c 1000000 -- ./mispredict
[ perf record: Woken up 4 times to write data ]
[ perf record: Captured and wrote 0.925 MB perf.data (5106 samples) ]
The 5106 samples are from both events and spread in both Loops.
In the post-process stage, a user can know that the Loop 2 has a 21%
branch miss rate. Then they can focus on the samples of branch-misses
events for the Loop 2.
With this patch, the user can generate the samples only when the branch
miss rate > 20%. For example,
perf record -e "{cpu_atom/branch-misses,period=200000,acr_mask=0x2/ppu,
cpu_atom/branch-instructions,period=1000000,acr_mask=0x3/u}"
-- ./mispredict
(Two different periods are applied to branch-misses and
branch-instructions. The ratio is set to 20%.
If the branch-instructions is overflowed first, the branch-miss
rate < 20%. No samples should be generated. All counters should be
automatically reloaded.
If the branch-misses is overflowed first, the branch-miss rate > 20%.
A sample triggered by the branch-misses event should be
generated. Just the counter of the branch-instructions should be
automatically reloaded.
The branch-misses event should only be automatically reloaded when
the branch-instructions is overflowed. So the "cause" event is the
branch-instructions event. The acr_mask is set to 0x2, since the
event index in the group of branch-instructions is 1.
The branch-instructions event is automatically reloaded no matter which
events are overflowed. So the "cause" events are the branch-misses
and the branch-instructions event. The acr_mask should be set to 0x3.)
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.098 MB perf.data (2498 samples) ]
$perf report
Percent │154: movl $0x0,-0x14(%rbp)
│ ↓ jmp 1af
│ for (i = j; i < N; i++)
│15d: mov -0x10(%rbp),%eax
│ mov %eax,-0x18(%rbp)
│ ↓ jmp 1a2
│ if (data[i] >= 128)
│165: mov -0x18(%rbp),%eax
│ cltq
│ lea 0x0(,%rax,4),%rdx
│ mov -0x8(%rbp),%rax
│ add %rdx,%rax
│ mov (%rax),%eax
│ ┌──cmp $0x7f,%eax
100.00 0.00 │ ├──jle 19e
│ │sum += data[i];
The 2498 samples are all from the branch-misses events for the Loop 2.
The number of samples and overhead is significantly reduced without
losing any information.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Thomas Falcon <thomas.falcon@intel.com>
Link: https://lkml.kernel.org/r/20250327195217.2683619-6-kan.liang@linux.intel.com
|
|
The auto counter reload feature requires an event flag to indicate an
auto counter reload group, which can only be scheduled on specific
counters that enumerated in CPUID. However, the hw_perf_event.flags has
run out on X86.
Two solutions were considered to address the issue.
- Currently, 20 bits are reserved for the architecture-specific flags.
Only the bit 31 is used for the generic flag. There is still plenty
of space left. Reserve 8 more bits for the arch-specific flags.
- Add a new X86 specific hw_perf_event.flags1 to support more flags.
The former is implemented. Enough room is still left in the global
generic flag.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Thomas Falcon <thomas.falcon@intel.com>
Link: https://lkml.kernel.org/r/20250327195217.2683619-4-kan.liang@linux.intel.com
|
|
More and more features require a dynamic event constraint, e.g., branch
counter logging, auto counter reload, Arch PEBS, etc.
Add a generic flag, PMU_FL_DYN_CONSTRAINT, to indicate the case. It
avoids keeping adding the individual flag in intel_cpuc_prepare().
Add a variable dyn_constraint in the struct hw_perf_event to track the
dynamic constraint of the event. Apply it if it's updated.
Apply the generic dynamic constraint for branch counter logging.
Many features on and after V6 require dynamic constraint. So
unconditionally set the flag for V6+.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Thomas Falcon <thomas.falcon@intel.com>
Link: https://lkml.kernel.org/r/20250327195217.2683619-2-kan.liang@linux.intel.com
|
|
Previously it was only safe to call perf_pmu_unregister() if there
were no active events of that pmu around -- which was impossible to
guarantee since it races all sorts against perf_init_event().
Rework the whole thing by:
- keeping track of all events for a given pmu
- 'hiding' the pmu from perf_init_event()
- waiting for the appropriate (s)rcu grace periods such that all
prior references to the PMU will be completed
- detaching all still existing events of that pmu (see first point)
and moving them to a new REVOKED state.
- actually freeing the pmu data.
Where notably the new REVOKED state must inhibit all event actions
from reaching code that wants to use event->pmu.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lkml.kernel.org/r/20250307193723.525402029@infradead.org
|
|
Perf can hang while freeing a sigtrap event if a related deferred
signal hadn't managed to be sent before the file got closed:
perf_event_overflow()
task_work_add(perf_pending_task)
fput()
task_work_add(____fput())
task_work_run()
____fput()
perf_release()
perf_event_release_kernel()
_free_event()
perf_pending_task_sync()
task_work_cancel() -> FAILED
rcuwait_wait_event()
Once task_work_run() is running, the list of pending callbacks is
removed from the task_struct and from this point on task_work_cancel()
can't remove any pending and not yet started work items, hence the
task_work_cancel() failure and the hang on rcuwait_wait_event().
Task work could be changed to remove one work at a time, so a work
running on the current task can always cancel a pending one, however
the wait / wake design is still subject to inverted dependencies when
remote targets are involved, as pictured by Oleg:
T1 T2
fd = perf_event_open(pid => T2->pid); fd = perf_event_open(pid => T1->pid);
close(fd) close(fd)
<IRQ> <IRQ>
perf_event_overflow() perf_event_overflow()
task_work_add(perf_pending_task) task_work_add(perf_pending_task)
</IRQ> </IRQ>
fput() fput()
task_work_add(____fput()) task_work_add(____fput())
task_work_run() task_work_run()
____fput() ____fput()
perf_release() perf_release()
perf_event_release_kernel() perf_event_release_kernel()
_free_event() _free_event()
perf_pending_task_sync() perf_pending_task_sync()
rcuwait_wait_event() rcuwait_wait_event()
Therefore the only option left is to acquire the event reference count
upon queueing the perf task work and release it from the task work, just
like it was done before 3a5465418f5f ("perf: Fix event leak upon exec and file release")
but without the leaks it fixed.
Some adjustments are necessary to make it work:
* A child event might dereference its parent upon freeing. Care must be
taken to release the parent last.
* Some places assuming the event doesn't have any reference held and
therefore can be freed right away must instead put the reference and
let the reference counting to its job.
Reported-by: "Yi Lai" <yi1.lai@linux.intel.com>
Closes: https://lore.kernel.org/all/Zx9Losv4YcJowaP%2F@ly-workstation/
Reported-by: syzbot+3c4321e10eea460eb606@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/673adf75.050a0220.87769.0024.GAE@google.com/
Fixes: 3a5465418f5f ("perf: Fix event leak upon exec and file release")
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250304135446.18905-1-frederic@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull lsm updates from Paul Moore:
- Various minor updates to the LSM Rust bindings
Changes include marking trivial Rust bindings as inlines and comment
tweaks to better reflect the LSM hooks.
- Add LSM/SELinux access controls to io_uring_allowed()
Similar to the io_uring_disabled sysctl, add a LSM hook to
io_uring_allowed() to enable LSMs a simple way to enforce security
policy on the use of io_uring. This pull request includes SELinux
support for this new control using the io_uring/allowed permission.
- Remove an unused parameter from the security_perf_event_open() hook
The perf_event_attr struct parameter was not used by any currently
supported LSMs, remove it from the hook.
- Add an explicit MAINTAINERS entry for the credentials code
We've seen problems in the past where patches to the credentials code
sent by non-maintainers would often languish on the lists for
multiple months as there was no one explicitly tasked with the
responsibility of reviewing and/or merging credentials related code.
Considering that most of the code under security/ has a vested
interest in ensuring that the credentials code is well maintained,
I'm volunteering to look after the credentials code and Serge Hallyn
has also volunteered to step up as an official reviewer. I posted the
MAINTAINERS update as a RFC to LKML in hopes that someone else would
jump up with an "I'll do it!", but beyond Serge it was all crickets.
- Update Stephen Smalley's old email address to prevent confusion
This includes a corresponding update to the mailmap file.
* tag 'lsm-pr-20250323' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
mailmap: map Stephen Smalley's old email addresses
lsm: remove old email address for Stephen Smalley
MAINTAINERS: add Serge Hallyn as a credentials reviewer
MAINTAINERS: add an explicit credentials entry
cred,rust: mark Credential methods inline
lsm,rust: reword "destroy" -> "release" in SecurityCtx
lsm,rust: mark SecurityCtx methods inline
perf: Remove unnecessary parameter of security check
lsm: fix a missing security_uring_allowed() prototype
io_uring,lsm,selinux: add LSM hooks for io_uring_setup()
io_uring: refactor io_uring_allowed()
|
|
With bcecd5a529c1 ("percpu: repurpose __percpu tag as a named address
space qualifier") the normal compilers start caring about the __percpu
annotation, as such f67d1ffd841f ("perf/core: Detach 'struct
perf_cpu_pmu_context' and 'struct pmu' lifetimes") needs a fixup.
Fixes: f67d1ffd841f ("perf/core: Detach 'struct perf_cpu_pmu_context' and 'struct pmu' lifetimes")
Fixes: bcecd5a529c1 ("percpu: repurpose __percpu tag as a named address space qualifier")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: jirislaby@kernel.org
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
The pmu specific data is saved in task_struct now. Remove it from event
context structure.
Remove swap_task_ctx() as well.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250314172700.438923-7-kan.liang@linux.intel.com
|
|
To save/restore LBR call stack data in system-wide mode, the task_struct
information is required.
Extend the parameters of sched_task() to supply task_struct information.
When schedule in, the LBR call stack data for new task will be restored.
When schedule out, the LBR call stack data for old task will be saved.
Only need to pass the required task_struct information.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250314172700.438923-4-kan.liang@linux.intel.com
|
|
The LBR call stack data has to be saved/restored during context switch
to fix the shorter LBRs call stacks issue in the system-wide mode.
Allocate PMU specific data and attach them to the corresponding
task_struct during LBR call stack monitoring.
When a LBR call stack event is accounted, the perf_ctx_data for the
related tasks will be allocated/attached by attach_perf_ctx_data().
When a LBR call stack event is unaccounted, the perf_ctx_data for
related tasks will be detached/freed by detach_perf_ctx_data().
The LBR call stack event could be a per-task event or a system-wide
event.
- For a per-task event, perf only allocates the perf_ctx_data for the
current task. If the allocation fails, perf will error out.
- For a system-wide event, perf has to allocate the perf_ctx_data for
both the existing tasks and the upcoming tasks.
The allocation for the existing tasks is done in perf_event_alloc().
If any allocation fails, perf will error out.
The allocation for the new tasks will be done in perf_event_fork().
A global reader/writer semaphore, global_ctx_data_rwsem, is added to
address the global race.
- The perf_ctx_data only be freed by the last LBR call stack event.
The number of the per-task events is tracked by refcount of each task.
Since the system-wide events impact all tasks, it's not practical to
go through the whole task list to update the refcount for each
system-wide event. The number of system-wide events is tracked by a
global variable global_ctx_data_ref.
Suggested-by: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250314172700.438923-3-kan.liang@linux.intel.com
|
|
Some PMU specific data has to be saved/restored during context switch,
e.g. LBR call stack data. Currently, the data is saved in event context
structure, but only for per-process event. For system-wide event,
because of missing the LBR call stack data after context switch, LBR
callstacks are always shorter in comparison to per-process mode.
For example,
Per-process mode:
$perf record --call-graph lbr -- taskset -c 0 ./tchain_edit
- 99.90% 99.86% tchain_edit tchain_edit [.] f3
99.86% _start
__libc_start_main
generic_start_main
main
f1
- f2
f3
System-wide mode:
$perf record --call-graph lbr -a -- taskset -c 0 ./tchain_edit
- 99.88% 99.82% tchain_edit tchain_edit [.] f3
- 62.02% main
f1
f2
f3
- 28.83% f1
- f2
f3
- 28.83% f1
- f2
f3
- 8.88% generic_start_main
main
f1
f2
f3
It isn't practical to simply allocate the data for system-wide event in
CPU context structure for all tasks. We have no idea which CPU a task
will be scheduled to. The duplicated LBR data has to be maintained on
every CPU context structure. That's a huge waste. Otherwise, the LBR
data still lost if the task is scheduled to another CPU.
Save the pmu specific data in task_struct. The size of pmu specific data
is 788 bytes for LBR call stack. Usually, the overall amount of threads
doesn't exceed a few thousands. For 10K threads, keeping LBR data would
consume additional ~8MB. The additional space will only be allocated
during LBR call stack monitoring. It will be released when the
monitoring is finished.
Furthermore, moving task_ctx_data from perf_event_context to task_struct
can reduce complexity and make things clearer. E.g. perf doesn't need to
swap task_ctx_data on optimized context switch path.
This patch set is just the first step. There could be other
optimization/extension on top of this patch set. E.g. for cgroup
profiling, perf just needs to save/store the LBR call stack information
for tasks in specific cgroup. That could reduce the additional space.
Also, the LBR call stack can be available for software events, or allow
even debugging use cases, like LBRs on crash later.
Because of the alignment requirement of Intel Arch LBR, the Kmem cache
is used to allocate the PMU specific data. It's required when child task
allocates the space. Save it in struct perf_ctx_data.
The refcount in struct perf_ctx_data is used to track the users of pmu
specific data.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Link: https://lore.kernel.org/r/20250314172700.438923-1-kan.liang@linux.intel.com
|
|
The commit 97c79a38cd45 ("perf core: Per event callchain limit")
introduced a per-event term to allow finer tuning of the depth of
callchains to save space.
It should be applied to the branch stack as well. For example, autoFDO
collections require maximum LBR entries. In the meantime, other
system-wide LBR users may only be interested in the latest a few number
of LBRs. A per-event LBR depth would save the perf output buffer.
The patch simply drops the uninterested branches, but HW still collects
the maximum branches. There may be a model-specific optimization that
can reduce the HW depth for some cases to reduce the overhead further.
But it isn't included in the patch set. Because it's not useful for all
cases. For example, ARCH LBR can utilize the PEBS and XSAVE to collect
LBRs. The depth should have less impact on the collecting overhead.
The model-specific optimization may be implemented later separately.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250310181536.3645382-1-kan.liang@linux.intel.com
|
|
In prepration for being able to unregister a PMU with existing events,
it becomes important to detach struct perf_cpu_pmu_context lifetimes
from that of struct pmu.
Notably struct perf_cpu_pmu_context embeds a struct perf_event_pmu_context
that can stay referenced until the last event goes.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20241104135518.760214287@infradead.org
|
|
perf_cpu_pmu_context::pmu_disable_count
Because it makes no sense to have two per-cpu allocations per pmu.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20241104135518.518730578@infradead.org
|
|
The error cleanup sequence in perf_event_alloc() is a subset of the
existing _free_event() function (it must of course be).
Split this out into __free_event() and simplify the error path.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20241104135517.967889521@infradead.org
|
|
It seems that the attr parameter was never been used in security
checks since it was first introduced by:
commit da97e18458fb ("perf_event: Add support for LSM and SELinux checks")
so remove it.
Signed-off-by: Luo Gengkun <luogengkun@huaweicloud.com>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Move ctl tables to two files:
- perf_event_{paranoid,mlock_kb,max_sample_rate} and
perf_cpu_time_max_percent into kernel/events/core.c
- perf_event_max_{stack,context_per_stack} into
kernel/events/callchain.c
Make static variables and functions that are fully contained in core.c
and callchain.cand remove them from include/linux/perf_event.h.
Additionally six_hundred_forty_kb is moved to callchain.c.
Two new sysctl tables are added ({callchain,events_core}_sysctl_table)
with their respective sysctl registration functions.
This is part of a greater effort to move ctl tables into their
respective subsystems which will reduce the merge conflicts in
kerenel/sysctl.c.
Signed-off-by: Joel Granados <joel.granados@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250218-jag-mv_ctltables-v1-5-cd3698ab8d29@kernel.org
|
|
The event may have been updated in the PMU-specific implementation,
e.g., Intel PEBS counters snapshotting. The common code should not
read and overwrite the value.
The PERF_SAMPLE_READ in the data->sample_type can be used to detect
whether the PMU-specific value is available. If yes, avoid the
pmu->read() in the common code. Add a new flag, skip_read, to track the
case.
Factor out a perf_pmu_read() to clean up the code.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250121152303.3128733-3-kan.liang@linux.intel.com
|
|
While at it, rename the same function in s390 cpum_sf PMU.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Ravi Bangoria <ravi.bangoria@amd.com>
Reviewed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Acked-by: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20241203180441.1634709-2-namhyung@kernel.org
|
|
Check sample_type in perf_sample_save_brstack() to prevent
saving branch stack data when it isn't required.
Suggested-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Yabin Cui <yabinc@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240515193610.2350456-4-yabinc@google.com
|
|
Check sample_type in perf_sample_save_callchain() to prevent
saving callchain data when it isn't required.
Suggested-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Yabin Cui <yabinc@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240515193610.2350456-3-yabinc@google.com
|
|
Currently, space for raw sample data is always allocated within sample
records for both BPF output and tracepoint events. This leads to unused
space in sample records when raw sample data is not requested.
This patch enforces checking sample type of an event in
perf_sample_save_raw_data(). So raw sample data will only be saved if
explicitly requested, reducing overhead when it is not needed.
Fixes: 0a9081cf0a11 ("perf/core: Add perf_sample_save_raw_data() helper")
Signed-off-by: Yabin Cui <yabinc@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240515193610.2350456-2-yabinc@google.com
|
|
Previously any PMU overflow interrupt that fired while a VCPU was
loaded was recorded as a guest event whether it truly was or not. This
resulted in nonsense perf recordings that did not honor
perf_event_attr.exclude_guest and recorded guest IPs where it should
have recorded host IPs.
Rework the sampling logic to only record guest samples for events with
exclude_guest = 0. This way any host-only events with exclude_guest
set will never see unexpected guest samples. The behaviour of events
with exclude_guest = 0 is unchanged.
Note that events configured to sample both host and guest may still
misattribute a PMI that arrived in the host as a guest event depending
on KVM arch and vendor behavior.
Signed-off-by: Colton Lewis <coltonlewis@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20241113190156.2145593-6-coltonlewis@google.com
|
|
For clarity, rename the arch-specific definitions of these functions
to perf_arch_* to denote they are arch-specifc. Define the
generic-named functions in one place where they can call the
arch-specific ones as needed.
Signed-off-by: Colton Lewis <coltonlewis@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Acked-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Acked-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20241113190156.2145593-3-coltonlewis@google.com
|
|
Hardware traces, such as instruction traces, can produce a vast amount of
trace data, so being able to reduce tracing to more specific circumstances
can be useful.
The ability to pause or resume tracing when another event happens, can do
that.
Add ability for an event to "pause" or "resume" AUX area tracing.
Add aux_pause bit to perf_event_attr to indicate that, if the event
happens, the associated AUX area tracing should be paused. Ditto
aux_resume. Do not allow aux_pause and aux_resume to be set together.
Add aux_start_paused bit to perf_event_attr to indicate to an AUX area
event that it should start in a "paused" state.
Add aux_paused to struct hw_perf_event for AUX area events to keep track of
the "paused" state. aux_paused is initialized to aux_start_paused.
Add PERF_EF_PAUSE and PERF_EF_RESUME modes for ->stop() and ->start()
callbacks. Call as needed, during __perf_event_output(). Add
aux_in_pause_resume to struct perf_buffer to prevent races with the NMI
handler. Pause/resume in NMI context will miss out if it coincides with
another pause/resume.
To use aux_pause or aux_resume, an event must be in a group with the AUX
area event as the group leader.
Example (requires Intel PT and tools patches also):
$ perf record --kcore -e intel_pt/aux-action=start-paused/k,syscalls:sys_enter_newuname/aux-action=resume/,syscalls:sys_exit_newuname/aux-action=pause/ uname
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.043 MB perf.data ]
$ perf script --call-trace
uname 30805 [000] 24001.058782799: name: 0x7ffc9c1865b0
uname 30805 [000] 24001.058784424: psb offs: 0
uname 30805 [000] 24001.058784424: cbr: 39 freq: 3904 MHz (139%)
uname 30805 [000] 24001.058784629: ([kernel.kallsyms]) debug_smp_processor_id
uname 30805 [000] 24001.058784629: ([kernel.kallsyms]) __x64_sys_newuname
uname 30805 [000] 24001.058784629: ([kernel.kallsyms]) down_read
uname 30805 [000] 24001.058784629: ([kernel.kallsyms]) __cond_resched
uname 30805 [000] 24001.058784629: ([kernel.kallsyms]) preempt_count_add
uname 30805 [000] 24001.058784629: ([kernel.kallsyms]) in_lock_functions
uname 30805 [000] 24001.058784629: ([kernel.kallsyms]) preempt_count_sub
uname 30805 [000] 24001.058784629: ([kernel.kallsyms]) up_read
uname 30805 [000] 24001.058784629: ([kernel.kallsyms]) preempt_count_add
uname 30805 [000] 24001.058784838: ([kernel.kallsyms]) in_lock_functions
uname 30805 [000] 24001.058784838: ([kernel.kallsyms]) preempt_count_sub
uname 30805 [000] 24001.058784838: ([kernel.kallsyms]) _copy_to_user
uname 30805 [000] 24001.058784838: ([kernel.kallsyms]) syscall_exit_to_user_mode
uname 30805 [000] 24001.058784838: ([kernel.kallsyms]) syscall_exit_work
uname 30805 [000] 24001.058784838: ([kernel.kallsyms]) perf_syscall_exit
uname 30805 [000] 24001.058784838: ([kernel.kallsyms]) debug_smp_processor_id
uname 30805 [000] 24001.058785046: ([kernel.kallsyms]) perf_trace_buf_alloc
uname 30805 [000] 24001.058785046: ([kernel.kallsyms]) perf_swevent_get_recursion_context
uname 30805 [000] 24001.058785046: ([kernel.kallsyms]) debug_smp_processor_id
uname 30805 [000] 24001.058785046: ([kernel.kallsyms]) debug_smp_processor_id
uname 30805 [000] 24001.058785046: ([kernel.kallsyms]) perf_tp_event
uname 30805 [000] 24001.058785046: ([kernel.kallsyms]) perf_trace_buf_update
uname 30805 [000] 24001.058785046: ([kernel.kallsyms]) tracing_gen_ctx_irq_test
uname 30805 [000] 24001.058785046: ([kernel.kallsyms]) perf_swevent_event
uname 30805 [000] 24001.058785046: ([kernel.kallsyms]) __perf_event_account_interrupt
uname 30805 [000] 24001.058785046: ([kernel.kallsyms]) __this_cpu_preempt_check
uname 30805 [000] 24001.058785046: ([kernel.kallsyms]) perf_event_output_forward
uname 30805 [000] 24001.058785046: ([kernel.kallsyms]) perf_event_aux_pause
uname 30805 [000] 24001.058785046: ([kernel.kallsyms]) ring_buffer_get
uname 30805 [000] 24001.058785046: ([kernel.kallsyms]) __rcu_read_lock
uname 30805 [000] 24001.058785046: ([kernel.kallsyms]) __rcu_read_unlock
uname 30805 [000] 24001.058785254: ([kernel.kallsyms]) pt_event_stop
uname 30805 [000] 24001.058785254: ([kernel.kallsyms]) debug_smp_processor_id
uname 30805 [000] 24001.058785254: ([kernel.kallsyms]) debug_smp_processor_id
uname 30805 [000] 24001.058785254: ([kernel.kallsyms]) native_write_msr
uname 30805 [000] 24001.058785463: ([kernel.kallsyms]) native_write_msr
uname 30805 [000] 24001.058785639: 0x0
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: James Clark <james.clark@arm.com>
Link: https://lkml.kernel.org/r/20241022155920.17511-3-adrian.hunter@intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf events updates from Ingo Molnar:
- Implement per-PMU context rescheduling to significantly improve
single-PMU performance, and related cleanups/fixes (Peter Zijlstra
and Namhyung Kim)
- Fix ancient bug resulting in a lot of events being dropped
erroneously at higher sampling frequencies (Luo Gengkun)
- uprobes enhancements:
- Implement RCU-protected hot path optimizations for better
performance:
"For baseline vs SRCU, peak througput increased from 3.7 M/s
(million uprobe triggerings per second) up to about 8 M/s. For
uretprobes it's a bit more modest with bump from 2.4 M/s to
5 M/s.
For SRCU vs RCU Tasks Trace, peak throughput for uprobes
increases further from 8 M/s to 10.3 M/s (+28%!), and for
uretprobes from 5.3 M/s to 5.8 M/s (+11%), as we have more
work to do on uretprobes side.
Even single-thread (no contention) performance is slightly
better: 3.276 M/s to 3.396 M/s (+3.5%) for uprobes, and 2.055
M/s to 2.174 M/s (+5.8%) for uretprobes."
(Andrii Nakryiko et al)
- Document mmap_lock, don't abuse get_user_pages_remote() (Oleg
Nesterov)
- Cleanups & fixes to prepare for future work:
- Remove uprobe_register_refctr()
- Simplify error handling for alloc_uprobe()
- Make uprobe_register() return struct uprobe *
- Fold __uprobe_unregister() into uprobe_unregister()
- Shift put_uprobe() from delete_uprobe() to uprobe_unregister()
- BPF: Fix use-after-free in bpf_uprobe_multi_link_attach()
(Oleg Nesterov)
- New feature & ABI extension: allow events to use PERF_SAMPLE READ
with inheritance, enabling sample based profiling of a group of
counters over a hierarchy of processes or threads (Ben Gainey)
- Intel uncore & power events updates:
- Add Arrow Lake and Lunar Lake support
- Add PERF_EV_CAP_READ_SCOPE
- Clean up and enhance cpumask and hotplug support
(Kan Liang)
- Add LNL uncore iMC freerunning support
- Use D0:F0 as a default device
(Zhenyu Wang)
- Intel PT: fix AUX snapshot handling race (Adrian Hunter)
- Misc fixes and cleanups (James Clark, Jiri Olsa, Oleg Nesterov and
Peter Zijlstra)
* tag 'perf-core-2024-09-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits)
dmaengine: idxd: Clean up cpumask and hotplug for perfmon
iommu/vt-d: Clean up cpumask and hotplug for perfmon
perf/x86/intel/cstate: Clean up cpumask and hotplug
perf: Add PERF_EV_CAP_READ_SCOPE
perf: Generic hotplug support for a PMU with a scope
uprobes: perform lockless SRCU-protected uprobes_tree lookup
rbtree: provide rb_find_rcu() / rb_find_add_rcu()
perf/uprobe: split uprobe_unregister()
uprobes: travers uprobe's consumer list locklessly under SRCU protection
uprobes: get rid of enum uprobe_filter_ctx in uprobe filter callbacks
uprobes: protected uprobe lifetime with SRCU
uprobes: revamp uprobe refcounting and lifetime management
bpf: Fix use-after-free in bpf_uprobe_multi_link_attach()
perf/core: Fix small negative period being ignored
perf: Really fix event_function_call() locking
perf: Optimize __pmu_ctx_sched_out()
perf: Add context time freeze
perf: Fix event_function_call() locking
perf: Extract a few helpers
perf: Optimize context reschedule for single PMU cases
...
|
|
Usually, an event can be read from any CPU of the scope. It doesn't need
to be read from the advertised CPU.
Add a new event cap, PERF_EV_CAP_READ_SCOPE. An event of a PMU with
scope can be read from any active CPU in the scope.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240802151643.1691631-3-kan.liang@linux.intel.com
|
|
The perf subsystem assumes that the counters of a PMU are per-CPU. So
the user space tool reads a counter from each CPU in the system wide
mode. However, many PMUs don't have a per-CPU counter. The counter is
effective for a scope, e.g., a die or a socket. To address this, a
cpumask is exposed by the kernel driver to restrict to one CPU to stand
for a specific scope. In case the given CPU is removed,
the hotplug support has to be implemented for each such driver.
The codes to support the cpumask and hotplug are very similar.
- Expose a cpumask into sysfs
- Pickup another CPU in the same scope if the given CPU is removed.
- Invoke the perf_pmu_migrate_context() to migrate to a new CPU.
- In event init, always set the CPU in the cpumask to event->cpu
Similar duplicated codes are implemented for each such PMU driver. It
would be good to introduce a generic infrastructure to avoid such
duplication.
5 popular scopes are implemented here, core, die, cluster, pkg, and
the system-wide. The scope can be set when a PMU is registered. If so, a
"cpumask" is automatically exposed for the PMU.
The "cpumask" is from the perf_online_<scope>_mask, which is to track
the active CPU for each scope. They are set when the first CPU of the
scope is online via the generic perf hotplug support. When a
corresponding CPU is removed, the perf_online_<scope>_mask is updated
accordingly and the PMU will be moved to a new CPU from the same scope
if possible.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240802151643.1691631-2-kan.liang@linux.intel.com
|
|
Use perf_allow_kernel() for 'pa_enable' (physical addresses),
'pct_enable' (physical timestamps) and context IDs. This means that
perf_event_paranoid is now taken into account and LSM hooks can be used,
which is more consistent with other perf_event_open calls. For example
PERF_SAMPLE_PHYS_ADDR uses perf_allow_kernel() rather than just
perfmon_capable().
This also indirectly fixes the following error message which is
misleading because perf_event_paranoid is not taken into account by
perfmon_capable():
$ perf record -e arm_spe/pa_enable/
Error:
Access to performance monitoring and observability operations is
limited. Consider adjusting /proc/sys/kernel/perf_event_paranoid
setting ...
Suggested-by: Al Grant <al.grant@arm.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20240827145113.1224604-1-james.clark@linaro.org
Link: https://lore.kernel.org/all/20240807120039.GD37996@noisy.programming.kicks-ass.net/
Signed-off-by: Will Deacon <will@kernel.org>
|
|
This change allows events to use PERF_SAMPLE_READ with inherit
so long as PERF_SAMPLE_TID is also set. This enables sample based
profiling of a group of counters over a hierarchy of processes or
threads. This is useful, for example, for collecting per-thread
counters/metrics, event based sampling of multiple counters as a unit,
access to the enabled and running time when using multiplexing and so
on.
Prior to this, users were restricted to either collecting aggregate
statistics for a multi-threaded/-process application (e.g. with
"perf stat"), or to sample individual threads, or to profile the entire
system (which requires root or CAP_PERFMON, and may produce much more
data than is required). Theoretically a tool could poll for or otherwise
monitor thread/process creation and construct whatever events the user
is interested in using perf_event_open, for each new thread or process,
but this is racy, can lead to file-descriptor exhaustion, and ultimately
just replicates the behaviour of inherit, but in userspace.
This configuration differs from inherit without PERF_SAMPLE_READ in that
the accumulated event count, and consequently any sample (such as if
triggered by overflow of sample_period) will be on a per-thread rather
than on an aggregate basis.
The meaning of read_format::value field of both PERF_RECORD_READ and
PERF_RECORD_SAMPLE is changed such that if the sampled event uses this
new configuration then the values reported will be per-thread rather
than the global aggregate value. This is a change from the existing
semantics of read_format (where PERF_SAMPLE_READ is used without
inherit), but it is necessary to expose the per-thread counter values,
and it avoids reinventing a separate "read_format_thread" field that
otherwise replicates the same behaviour. This change should not break
existing tools, since this configuration was not previously valid and
was rejected by the kernel. Tools that opt into this new mode will need
to account for this when calculating the counter delta for a given
sample. Tools that wish to have both the per-thread and aggregate value
can perform the global aggregation themselves from the per-thread
values.
The change to read_format::value does not affect existing valid
perf_event_attr configurations, nor does it change the behaviour of
calls to "read" on an event descriptor. Both continue to report the
aggregate value for the entire thread/process hierarchy. The difference
between the results reported by "read" and PERF_RECORD_SAMPLE in this
new configuration is justified on the basis that it is not (easily)
possible for "read" to target a specific thread (the caller only has
the fd for the original parent event).
Signed-off-by: Ben Gainey <ben.gainey@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20240730084417.7693-3-ben.gainey@arm.com
|
|
nr_pending counts the number of events in the context that
either pending_sigtrap or pending_work, but it is used
to prevent taking the fast path in perf_event_context_sched_out.
Renamed to reflect what it is used for, rather than what it
counts. This change allows using the field to track other
event properties that also require skipping the fast path
without possible confusion over the name.
Signed-off-by: Ben Gainey <ben.gainey@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20240730084417.7693-2-ben.gainey@arm.com
|
|
Start a new section for AUX PMUs in hw_perf_event.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
const qualify the struct ctl_table argument in the proc_handler function
signatures. This is a prerequisite to moving the static ctl_table
structs into .rodata data which will ensure that proc_handler function
pointers cannot be modified.
This patch has been generated by the following coccinelle script:
```
virtual patch
@r1@
identifier ctl, write, buffer, lenp, ppos;
identifier func !~ "appldata_(timer|interval)_handler|sched_(rt|rr)_handler|rds_tcp_skbuf_handler|proc_sctp_do_(hmac_alg|rto_min|rto_max|udp_port|alpha_beta|auth|probe_interval)";
@@
int func(
- struct ctl_table *ctl
+ const struct ctl_table *ctl
,int write, void *buffer, size_t *lenp, loff_t *ppos);
@r2@
identifier func, ctl, write, buffer, lenp, ppos;
@@
int func(
- struct ctl_table *ctl
+ const struct ctl_table *ctl
,int write, void *buffer, size_t *lenp, loff_t *ppos)
{ ... }
@r3@
identifier func;
@@
int func(
- struct ctl_table *
+ const struct ctl_table *
,int , void *, size_t *, loff_t *);
@r4@
identifier func, ctl;
@@
int func(
- struct ctl_table *ctl
+ const struct ctl_table *ctl
,int , void *, size_t *, loff_t *);
@r5@
identifier func, write, buffer, lenp, ppos;
@@
int func(
- struct ctl_table *
+ const struct ctl_table *
,int write, void *buffer, size_t *lenp, loff_t *ppos);
```
* Code formatting was adjusted in xfs_sysctl.c to comply with code
conventions. The xfs_stats_clear_proc_handler,
xfs_panic_mask_proc_handler and xfs_deprecated_dointvec_minmax where
adjusted.
* The ctl_table argument in proc_watchdog_common was const qualified.
This is called from a proc_handler itself and is calling back into
another proc_handler, making it necessary to change it as part of the
proc_handler migration.
Co-developed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Co-developed-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: Joel Granados <j.granados@samsung.com>
|
|
perf_pending_irq() invokes perf_event_wakeup() and __perf_pending_irq().
The former is in charge of waking any tasks which waits to be woken up
while the latter disables perf-events.
The irq_work perf_pending_irq(), while this an irq_work, the callback
is invoked in thread context on PREEMPT_RT. This is needed because all
the waking functions (wake_up_all(), kill_fasync()) acquire sleep locks
which must not be used with disabled interrupts.
Disabling events, as done by __perf_pending_irq(), expects a hardirq
context and disabled interrupts. This requirement is not fulfilled on
PREEMPT_RT.
Split functionality based on perf_event::pending_disable into irq_work
named `pending_disable_irq' and invoke it in hardirq context on
PREEMPT_RT. Rename the split out callback to perf_pending_disable().
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Marco Elver <elver@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/20240704170424.1466941-8-bigeasy@linutronix.de
|
|
The swevent_htable::recursion counter is used to avoid creating an
swevent while an event is processed to avoid recursion. The counter is
per-CPU and preemption must be disabled to have a stable counter.
perf_pending_task() disables preemption to access the counter and then
signal. This is problematic on PREEMPT_RT because sending a signal uses
a spinlock_t which must not be acquired in atomic on PREEMPT_RT because
it becomes a sleeping lock.
The atomic context can be avoided by moving the counter into the
task_struct. There is a 4 byte hole between futex_state (usually always
on) and the following perf pointer (perf_event_ctxp). After the
recursion lost some weight it fits perfectly.
Move swevent_htable::recursion into task_struct.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Marco Elver <elver@google.com>
Link: https://lore.kernel.org/r/20240704170424.1466941-6-bigeasy@linutronix.de
|
|
A signal is delivered by raising irq_work() which works from any context
including NMI. irq_work() can be delayed if the architecture does not
provide an interrupt vector. In order not to lose a signal, the signal
is injected via task_work during event_sched_out().
Instead going via irq_work, the signal could be added directly via
task_work. The signal is sent to current and can be enqueued on its
return path to userland.
Queue signal via task_work and consider possible NMI context. Remove
perf_event::pending_sigtrap and and use perf_event::pending_work
instead.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Marco Elver <elver@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/20240704170424.1466941-4-bigeasy@linutronix.de
|
|
The perf pending task work is never waited upon the matching event
release. In the case of a child event, released via free_event()
directly, this can potentially result in a leaked event, such as in the
following scenario that doesn't even require a weak IRQ work
implementation to trigger:
schedule()
prepare_task_switch()
=======> <NMI>
perf_event_overflow()
event->pending_sigtrap = ...
irq_work_queue(&event->pending_irq)
<======= </NMI>
perf_event_task_sched_out()
event_sched_out()
event->pending_sigtrap = 0;
atomic_long_inc_not_zero(&event->refcount)
task_work_add(&event->pending_task)
finish_lock_switch()
=======> <IRQ>
perf_pending_irq()
//do nothing, rely on pending task work
<======= </IRQ>
begin_new_exec()
perf_event_exit_task()
perf_event_exit_event()
// If is child event
free_event()
WARN(atomic_long_cmpxchg(&event->refcount, 1, 0) != 1)
// event is leaked
Similar scenarios can also happen with perf_event_remove_on_exec() or
simply against concurrent perf_event_release().
Fix this with synchonizing against the possibly remaining pending task
work while freeing the event, just like is done with remaining pending
IRQ work. This means that the pending task callback neither need nor
should hold a reference to the event, preventing it from ever beeing
freed.
Fixes: 517e6a301f34 ("perf: Fix perf_pending_task() UaF")
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240621091601.18227-5-frederic@kernel.org
|
