summaryrefslogtreecommitdiff
path: root/include/linux/pci.h
AgeCommit message (Collapse)AuthorFilesLines
2018-08-16Merge tag 'pci-v4.19-changes' of ↵Linus Torvalds1-21/+20
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci updates from Bjorn Helgaas: - Decode AER errors with names similar to "lspci" (Tyler Baicar) - Expose AER statistics in sysfs (Rajat Jain) - Clear AER status bits selectively based on the type of recovery (Oza Pawandeep) - Honor "pcie_ports=native" even if HEST sets FIRMWARE_FIRST (Alexandru Gagniuc) - Don't clear AER status bits if we're using the "Firmware-First" strategy where firmware owns the registers (Alexandru Gagniuc) - Use sysfs_match_string() to simplify ASPM sysfs parsing (Andy Shevchenko) - Remove unnecessary includes of <linux/pci-aspm.h> (Bjorn Helgaas) - Defer DPC event handling to work queue (Keith Busch) - Use threaded IRQ for DPC bottom half (Keith Busch) - Print AER status while handling DPC events (Keith Busch) - Work around IDT switch ACS Source Validation erratum (James Puthukattukaran) - Emit diagnostics for all cases of PCIe Link downtraining (Links operating slower than they're capable of) (Alexandru Gagniuc) - Skip VFs when configuring Max Payload Size (Myron Stowe) - Reduce Root Port Max Payload Size if necessary when hot-adding a device below it (Myron Stowe) - Simplify SHPC existence/permission checks (Bjorn Helgaas) - Remove hotplug sample skeleton driver (Lukas Wunner) - Convert pciehp to threaded IRQ handling (Lukas Wunner) - Improve pciehp tolerance of missed events and initially unstable links (Lukas Wunner) - Clear spurious pciehp events on resume (Lukas Wunner) - Add pciehp runtime PM support, including for Thunderbolt controllers (Lukas Wunner) - Support interrupts from pciehp bridges in D3hot (Lukas Wunner) - Mark fall-through switch cases before enabling -Wimplicit-fallthrough (Gustavo A. R. Silva) - Move DMA-debug PCI init from arch code to PCI core (Christoph Hellwig) - Fix pci_request_irq() usage of IRQF_ONESHOT when no handler is supplied (Heiner Kallweit) - Unify PCI and DMA direction #defines (Shunyong Yang) - Add PCI_DEVICE_DATA() macro (Andy Shevchenko) - Check for VPD completion before checking for timeout (Bert Kenward) - Limit Netronome NFP5000 config space size to work around erratum (Jakub Kicinski) - Set IRQCHIP_ONESHOT_SAFE for PCI MSI irqchips (Heiner Kallweit) - Document ACPI description of PCI host bridges (Bjorn Helgaas) - Add "pci=disable_acs_redir=" parameter to disable ACS redirection for peer-to-peer DMA support (we don't have the peer-to-peer support yet; this is just one piece) (Logan Gunthorpe) - Clean up devm_of_pci_get_host_bridge_resources() resource allocation (Jan Kiszka) - Fixup resizable BARs after suspend/resume (Christian König) - Make "pci=earlydump" generic (Sinan Kaya) - Fix ROM BAR access routines to stay in bounds and check for signature correctly (Rex Zhu) - Add DMA alias quirk for Microsemi Switchtec NTB (Doug Meyer) - Expand documentation for pci_add_dma_alias() (Logan Gunthorpe) - To avoid bus errors, enable PASID only if entire path supports End-End TLP prefixes (Sinan Kaya) - Unify slot and bus reset functions and remove hotplug knowledge from callers (Sinan Kaya) - Add Function-Level Reset quirks for Intel and Samsung NVMe devices to fix guest reboot issues (Alex Williamson) - Add function 1 DMA alias quirk for Marvell 88SS9183 PCIe SSD Controller (Bjorn Helgaas) - Remove Xilinx AXI-PCIe host bridge arch dependency (Palmer Dabbelt) - Remove Aardvark outbound window configuration (Evan Wang) - Fix Aardvark bridge window sizing issue (Zachary Zhang) - Convert Aardvark to use pci_host_probe() to reduce code duplication (Thomas Petazzoni) - Correct the Cadence cdns_pcie_writel() signature (Alan Douglas) - Add Cadence support for optional generic PHYs (Alan Douglas) - Add Cadence power management ops (Alan Douglas) - Remove redundant variable from Cadence driver (Colin Ian King) - Add Kirin MSI support (Xiaowei Song) - Drop unnecessary root_bus_nr setting from exynos, imx6, keystone, armada8k, artpec6, designware-plat, histb, qcom, spear13xx (Shawn Guo) - Move link notification settings from DesignWare core to individual drivers (Gustavo Pimentel) - Add endpoint library MSI-X interfaces (Gustavo Pimentel) - Correct signature of endpoint library IRQ interfaces (Gustavo Pimentel) - Add DesignWare endpoint library MSI-X callbacks (Gustavo Pimentel) - Add endpoint library MSI-X test support (Gustavo Pimentel) - Remove unnecessary GFP_ATOMIC from Hyper-V "new child" allocation (Jia-Ju Bai) - Add more devices to Broadcom PAXC quirk (Ray Jui) - Work around corrupted Broadcom PAXC config space to enable SMMU and GICv3 ITS (Ray Jui) - Disable MSI parsing to work around broken Broadcom PAXC logic in some devices (Ray Jui) - Hide unconfigured functions to work around a Broadcom PAXC defect (Ray Jui) - Lower iproc log level to reduce console output during boot (Ray Jui) - Fix mobiveil iomem/phys_addr_t type usage (Lorenzo Pieralisi) - Fix mobiveil missing include file (Lorenzo Pieralisi) - Add mobiveil Kconfig/Makefile support (Lorenzo Pieralisi) - Fix mvebu I/O space remapping issues (Thomas Petazzoni) - Use generic pci_host_bridge in mvebu instead of ARM-specific API (Thomas Petazzoni) - Whitelist VMD devices with fast interrupt handlers to avoid sharing vectors with slow handlers (Keith Busch) * tag 'pci-v4.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (153 commits) PCI/AER: Don't clear AER bits if error handling is Firmware-First PCI: Limit config space size for Netronome NFP5000 PCI/MSI: Set IRQCHIP_ONESHOT_SAFE for PCI-MSI irqchips PCI/VPD: Check for VPD access completion before checking for timeout PCI: Add PCI_DEVICE_DATA() macro to fully describe device ID entry PCI: Match Root Port's MPS to endpoint's MPSS as necessary PCI: Skip MPS logic for Virtual Functions (VFs) PCI: Add function 1 DMA alias quirk for Marvell 88SS9183 PCI: Check for PCIe Link downtraining PCI: Add ACS Redirect disable quirk for Intel Sunrise Point PCI: Add device-specific ACS Redirect disable infrastructure PCI: Convert device-specific ACS quirks from NULL termination to ARRAY_SIZE PCI: Add "pci=disable_acs_redir=" parameter for peer-to-peer support PCI: Allow specifying devices using a base bus and path of devfns PCI: Make specifying PCI devices in kernel parameters reusable PCI: Hide ACS quirk declarations inside PCI core PCI: Delay after FLR of Intel DC P3700 NVMe PCI: Disable Samsung SM961/PM961 NVMe before FLR PCI: Export pcie_has_flr() PCI: mvebu: Drop bogus comment above mvebu_pcie_map_registers() ...
2018-08-16Merge tag 'drm-next-2018-08-15' of git://anongit.freedesktop.org/drm/drmLinus Torvalds1-0/+3
Pull drm updates from Dave Airlie: "This is the main drm pull request for 4.19. Rob has some new hardware support for new qualcomm hw that I'll send along separately. This has the display part of it, the remaining pull is for the acceleration engine. This also contains a wound-wait/wait-die mutex rework, Peter has acked it for merging via my tree. Otherwise mostly the usual level of activity. Summary: core: - Wound-wait/wait-die mutex rework - Add writeback connector type - Add "content type" property for HDMI - Move GEM bo to drm_framebuffer - Initial gpu scheduler documentation - GPU scheduler fixes for dying processes - Console deferred fbcon takeover support - Displayport support for CEC tunneling over AUX panel: - otm8009a panel driver fixes - Innolux TV123WAM and G070Y2-L01 panel driver - Ilitek ILI9881c panel driver - Rocktech RK070ER9427 LCD - EDT ETM0700G0EDH6 and EDT ETM0700G0BDH6 - DLC DLC0700YZG-1 - BOE HV070WSA-100 - newhaven, nhd-4.3-480272ef-atxl LCD - DataImage SCF0700C48GGU18 - Sharp LQ035Q7DB03 - p079zca: Refactor to support multiple panels tinydrm: - ILI9341 display panel New driver: - vkms - virtual kms driver to testing. i915: - Icelake: Display enablement DSI support IRQ support Powerwell support - GPU reset fixes and improvements - Full ppgtt support refactoring - PSR fixes and improvements - Execlist improvments - GuC related fixes amdgpu: - Initial amdgpu documentation - JPEG engine support on VCN - CIK uses powerplay by default - Move to using core PCIE functionality for gens/lanes - DC/Powerplay interface rework - Stutter mode support for RV - Vega12 Powerplay updates - GFXOFF fixes - GPUVM fault debugging - Vega12 GFXOFF - DC improvements - DC i2c/aux changes - UVD 7.2 fixes - Powerplay fixes for Polaris12, CZ/ST - command submission bo_list fixes amdkfd: - Raven support - Power management fixes udl: - Cleanups and fixes nouveau: - misc fixes and cleanups. msm: - DPU1 support display controller in sdm845 - GPU coredump support. vmwgfx: - Atomic modesetting validation fixes - Support for multisample surfaces armada: - Atomic modesetting support completed. exynos: - IPPv2 fixes - Move g2d to component framework - Suspend/resume support cleanups - Driver cleanups imx: - CSI configuration improvements - Driver cleanups - Use atomic suspend/resume helpers - ipu-v3 V4L2 XRGB32/XBGR32 support pl111: - Add Nomadik LCDC variant v3d: - GPU scheduler jobs management sun4i: - R40 display engine support - TCON TOP driver mediatek: - MT2712 SoC support rockchip: - vop fixes omapdrm: - Workaround for DRA7 errata i932 - Fix mm_list locking mali-dp: - Writeback implementation PM improvements - Internal error reporting debugfs tilcdc: - Single fix for deferred probing hdlcd: - Teardown fixes tda998x: - Converted to a bridge driver. etnaviv: - Misc fixes" * tag 'drm-next-2018-08-15' of git://anongit.freedesktop.org/drm/drm: (1506 commits) drm/amdgpu/sriov: give 8s for recover vram under RUNTIME drm/scheduler: fix param documentation drm/i2c: tda998x: correct PLL divider calculation drm/i2c: tda998x: get rid of private fill_modes function drm/i2c: tda998x: move mode_valid() to bridge drm/i2c: tda998x: register bridge outside of component helper drm/i2c: tda998x: cleanup from previous changes drm/i2c: tda998x: allocate tda998x_priv inside tda998x_create() drm/i2c: tda998x: convert to bridge driver drm/scheduler: fix timeout worker setup for out of order job completions drm/amd/display: display connected to dp-1 does not light up drm/amd/display: update clk for various HDMI color depths drm/amd/display: program display clock on cache match drm/amd/display: Add NULL check for enabling dp ss drm/amd/display: add vbios table check for enabling dp ss drm/amd/display: Don't share clk source between DP and HDMI drm/amd/display: Fix DP HBR2 Eye Diagram Pattern on Carrizo drm/amd/display: Use calculated disp_clk_khz value for dce110 drm/amd/display: Implement custom degamma lut on dcn drm/amd/display: Destroy aux_engines only once ...
2018-08-15Merge branch 'pci/virtualization'Bjorn Helgaas1-5/+3
- To avoid bus errors, enable PASID only if entire path supports End-End TLP prefixes (Sinan Kaya) - Unify slot and bus reset functions and remove hotplug knowledge from callers (Sinan Kaya) - Add Function-Level Reset quirks for Intel and Samsung NVMe devices to fix guest reboot issues (Alex Williamson) - Add function 1 DMA alias quirk for Marvell 88SS9183 PCIe SSD Controller (Bjorn Helgaas) * pci/virtualization: PCI: Add function 1 DMA alias quirk for Marvell 88SS9183 PCI: Delay after FLR of Intel DC P3700 NVMe PCI: Disable Samsung SM961/PM961 NVMe before FLR PCI: Export pcie_has_flr() PCI: Rename pci_try_reset_bus() to pci_reset_bus() PCI: Deprecate pci_reset_bus() and pci_reset_slot() functions PCI: Unify try slot and bus reset API PCI: Hide pci_reset_bridge_secondary_bus() from drivers IB/hfi1: Use pci_try_reset_bus() for initiating PCI Secondary Bus Reset PCI: Handle error return from pci_reset_bridge_secondary_bus() PCI/IOV: Tidy pci_sriov_set_totalvfs() PCI: Enable PASID only if entire path supports End-End TLP prefixes # Conflicts: # drivers/pci/hotplug/pciehp_hpc.c
2018-08-15Merge branch 'pci/resource'Bjorn Helgaas1-1/+0
- Clean up devm_of_pci_get_host_bridge_resources() resource allocation (Jan Kiszka) - Fixup resizable BARs after suspend/resume (Christian König) - Make "pci=earlydump" generic (Sinan Kaya) - Fix ROM BAR access routines to stay in bounds and check for signature correctly (Rex Zhu) * pci/resource: PCI: Make pci_get_rom_size() static PCI: Add check code for last image indicator not set PCI: Avoid accessing memory outside the ROM BAR PCI: Make early dump functionality generic PCI: Cleanup PCI_REBAR_CTRL_BAR_SHIFT handling PCI: Restore resized BAR state on resume PCI: Clean up resource allocation in devm_of_pci_get_host_bridge_resources() # Conflicts: # Documentation/admin-guide/kernel-parameters.txt
2018-08-15Merge branch 'pci/peer-to-peer'Bjorn Helgaas1-11/+0
- Add "pci=disable_acs_redir=" parameter to disable ACS redirection for peer-to-peer DMA support (we don't have the peer-to-peer support yet; this is just one piece) (Logan Gunthorpe) * pci/peer-to-peer: PCI: Add ACS Redirect disable quirk for Intel Sunrise Point PCI: Add device-specific ACS Redirect disable infrastructure PCI: Convert device-specific ACS quirks from NULL termination to ARRAY_SIZE PCI: Add "pci=disable_acs_redir=" parameter for peer-to-peer support PCI: Allow specifying devices using a base bus and path of devfns PCI: Make specifying PCI devices in kernel parameters reusable PCI: Hide ACS quirk declarations inside PCI core
2018-08-15Merge branch 'pci/misc'Bjorn Helgaas1-0/+15
- Mark fall-through switch cases before enabling -Wimplicit-fallthrough (Gustavo A. R. Silva) - Move DMA-debug PCI init from arch code to PCI core (Christoph Hellwig) - Fix pci_request_irq() usage of IRQF_ONESHOT when no handler is supplied (Heiner Kallweit) - Unify PCI and DMA direction #defines (Shunyong Yang) - Add PCI_DEVICE_DATA() macro (Andy Shevchenko) - Check for VPD completion before checking for timeout (Bert Kenward) - Limit Netronome NFP5000 config space size to work around erratum (Jakub Kicinski) * pci/misc: PCI: Limit config space size for Netronome NFP5000 PCI/VPD: Check for VPD access completion before checking for timeout PCI: Add PCI_DEVICE_DATA() macro to fully describe device ID entry PCI: Unify PCI and normal DMA direction definitions PCI: Use IRQF_ONESHOT if pci_request_irq() called with no handler PCI: Call dma_debug_add_bus() for pci_bus_type from PCI core PCI: Mark fall-through switch cases before enabling -Wimplicit-fallthrough # Conflicts: # drivers/pci/hotplug/pciehp_ctrl.c
2018-08-15Merge branch 'pci/hotplug'Bjorn Helgaas1-0/+1
- Simplify SHPC existence/permission checks (Bjorn Helgaas) - Remove hotplug sample skeleton driver (Lukas Wunner) - Convert pciehp to threaded IRQ handling (Lukas Wunner) - Improve pciehp tolerance of missed events and initially unstable links (Lukas Wunner) - Clear spurious pciehp events on resume (Lukas Wunner) - Add pciehp runtime PM support, including for Thunderbolt controllers (Lukas Wunner) - Support interrupts from pciehp bridges in D3hot (Lukas Wunner) * pci/hotplug: PCI: pciehp: Deduplicate presence check on probe & resume PCI: pciehp: Avoid implicit fallthroughs in switch statements PCI: Whitelist Thunderbolt ports for runtime D3 PCI: Whitelist native hotplug ports for runtime D3 PCI: sysfs: Resume to D0 on function reset PCI: pciehp: Resume parent to D0 on config space access PCI: pciehp: Resume to D0 on enable/disable PCI: pciehp: Support interrupts sent from D3hot PCI: pciehp: Obey compulsory command delay after resume PCI: pciehp: Clear spurious events earlier on resume PCI: portdrv: Deduplicate PM callback iterator PCI: pciehp: Avoid slot access during reset PCI: pciehp: Always enable occupied slot on probe PCI: pciehp: Become resilient to missed events PCI: pciehp: Tolerate initially unstable link PCI: pciehp: Declare pciehp_enable/disable_slot() static PCI: pciehp: Drop enable/disable lock PCI: pciehp: Enable/disable exclusively from IRQ thread PCI: pciehp: Track enable/disable status PCI: pciehp: Publish to user space last on probe PCI: hotplug: Demidlayer registration with the core PCI: pciehp: Drop slot workqueue PCI: pciehp: Handle events synchronously PCI: pciehp: Stop blinking on slot enable failure PCI: pciehp: Convert to threaded polling PCI: pciehp: Convert to threaded IRQ PCI: pciehp: Document struct slot and struct controller PCI: pciehp: Declare pciehp_unconfigure_device() void PCI: pciehp: Drop unnecessary NULL pointer check PCI: pciehp: Fix unprotected list iteration in IRQ handler PCI: pciehp: Fix use-after-free on unplug PCI: hotplug: Don't leak pci_slot on registration failure PCI: hotplug: Delete skeleton driver PCI: shpchp: Separate existence of SHPC and permission to use it
2018-08-15Merge branch 'pci/aer'Bjorn Helgaas1-4/+1
- Decode AER errors with names similar to "lspci" (Tyler Baicar) - Expose AER statistics in sysfs (Rajat Jain) - Clear AER status bits selectively based on the type of recovery (Oza Pawandeep) - Honor "pcie_ports=native" even if HEST sets FIRMWARE_FIRST (Alexandru Gagniuc) - Don't clear AER status bits if we're using the "Firmware-First" strategy where firmware owns the registers (Alexandru Gagniuc) * pci/aer: PCI/AER: Don't clear AER bits if error handling is Firmware-First PCI/AER: Remove duplicate PCI_EXP_AER_FLAGS definition PCI/portdrv: Remove pcie_portdrv_err_handler.slot_reset PCI/AER: Clear device status bits during ERR_COR handling PCI/AER: Clear device status bits during ERR_FATAL and ERR_NONFATAL PCI/AER: Remove ERR_FATAL code from ERR_NONFATAL path PCI/AER: Factor out ERR_NONFATAL status bit clearing PCI/AER: Clear only ERR_NONFATAL bits during non-fatal recovery PCI/AER: Clear only ERR_FATAL status bits during fatal recovery PCI/AER: Honor "pcie_ports=native" even if HEST sets FIRMWARE_FIRST PCI/AER: Add sysfs attributes for rootport cumulative stats PCI/AER: Add sysfs attributes to provide AER stats and breakdown PCI/AER: Define aer_stats structure for AER capable devices PCI/AER: Move internal declarations to drivers/pci/pci.h PCI/AER: Adopt lspci names for AER error decoding PCI/AER: Expose internal API for obtaining AER information # Conflicts: # drivers/pci/pci.h
2018-08-15PCI: Add PCI_DEVICE_DATA() macro to fully describe device ID entryAndy Shevchenko1-0/+15
There are a lot of examples in the kernel where PCI_VDEVICE() is used and still looks not so convenient due to additional driver_data field attached. Introduce PCI_DEVICE_DATA() macro to fully describe device ID entry in shortest possible form. For example, before: { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_MRFLD), (kernel_ulong_t) &dwc3_pci_mrfld_properties, }, after: { PCI_DEVICE_DATA(INTEL, MRFLD, &dwc3_pci_mrfld_properties) }, Drivers can be converted later on in independent way. While here, remove the unused macro with the same name from Ralink wireless driver. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Kalle Valo <kvalo@codeaurora.org> # for rt2x00
2018-08-10PCI: Hide ACS quirk declarations inside PCI coreBjorn Helgaas1-11/+0
Move declarations for these functions: pci_dev_specific_acs_enabled() pci_dev_specific_enable_acs() from include/linux/pci.h to drivers/pci/pci.h because nothing outside the PCI core needs to use them. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-08-09PCI: Export pcie_has_flr()Alex Williamson1-0/+1
pcie_flr() suggests pcie_has_flr() to ensure that PCIe FLR support is present prior to calling. pcie_flr() is exported while pcie_has_flr() is not. Resolve this. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-07-31PCI: Fix is_added/is_busmaster race conditionHari Vyas1-1/+0
When a PCI device is detected, pdev->is_added is set to 1 and proc and sysfs entries are created. When the device is removed, pdev->is_added is checked for one and then device is detached with clearing of proc and sys entries and at end, pdev->is_added is set to 0. is_added and is_busmaster are bit fields in pci_dev structure sharing same memory location. A strange issue was observed with multiple removal and rescan of a PCIe NVMe device using sysfs commands where is_added flag was observed as zero instead of one while removing device and proc,sys entries are not cleared. This causes issue in later device addition with warning message "proc_dir_entry" already registered. Debugging revealed a race condition between the PCI core setting the is_added bit in pci_bus_add_device() and the NVMe driver reset work-queue setting the is_busmaster bit in pci_set_master(). As these fields are not handled atomically, that clears the is_added bit. Move the is_added bit to a separate private flag variable and use atomic functions to set and retrieve the device addition state. This avoids the race because is_added no longer shares a memory location with is_busmaster. Link: https://bugzilla.kernel.org/show_bug.cgi?id=200283 Signed-off-by: Hari Vyas <hari.vyas@broadcom.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lukas Wunner <lukas@wunner.de> Acked-by: Michael Ellerman <mpe@ellerman.id.au>
2018-07-30BackMerge v4.18-rc7 into drm-nextDave Airlie1-0/+2
rmk requested this for armada and I think we've had a few conflicts build up. Signed-off-by: Dave Airlie <airlied@redhat.com>
2018-07-20PCI: Rename pci_try_reset_bus() to pci_reset_bus()Sinan Kaya1-1/+1
Now that the old implementation of pci_reset_bus() is gone, replace pci_try_reset_bus() with pci_reset_bus(). Compared to the old implementation, new code will fail immmediately with -EAGAIN if object lock cannot be obtained. Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-07-20PCI: Deprecate pci_reset_bus() and pci_reset_slot() functionsSinan Kaya1-2/+0
pci_reset_bus() and pci_reset_slot() functions are not being used by any code. Remove them from the kernel in favor of pci_try_reset_bus() and pci_try_reset_slot() functions. Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-07-20PCI: Unify try slot and bus reset APISinan Kaya1-2/+1
Drivers are expected to call pci_try_reset_slot() or pci_try_reset_bus() by querying if a system supports hotplug or not. A survey showed that most drivers don't do this and we are leaking hotplug capability to the user. Hide pci_try_slot_reset() from drivers and embed into pci_try_bus_reset(). Change pci_try_reset_bus() parameter from struct pci_bus to struct pci_dev. Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-07-20PCI: Hide pci_reset_bridge_secondary_bus() from driversSinan Kaya1-1/+0
Rename pci_reset_bridge_secondary_bus() to pci_bridge_secondary_bus_reset() and move the declaration from linux/pci.h to drivers/pci.h to be used internally in PCI directory only. Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-07-20PCI/AER: Define aer_stats structure for AER capable devicesRajat Jain1-0/+1
Define a structure to hold the AER statistics. There are 2 groups of statistics: dev_* counters that are to be collected for all AER capable devices and rootport_* counters that are collected for all (AER capable) rootports only. Allocate and free this structure when device is added or released (thus counters survive the lifetime of the device). Signed-off-by: Rajat Jain <rajatja@google.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-07-20PCI/AER: Move internal declarations to drivers/pci/pci.hRajat Jain1-4/+0
Since pci_aer_init() and pci_no_aer() are used only internally, move their declarations to the PCI internal header file. Also, no one cares about return value of pci_aer_init(), so make it void. Signed-off-by: Rajat Jain <rajatja@google.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-07-18PCI: OF: Fix I/O space page leakSergei Shtylyov1-0/+2
When testing the R-Car PCIe driver on the Condor board, if the PCIe PHY driver was left disabled, the kernel crashed with this BUG: kernel BUG at lib/ioremap.c:72! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 39 Comm: kworker/0:1 Not tainted 4.17.0-dirty #1092 Hardware name: Renesas Condor board based on r8a77980 (DT) Workqueue: events deferred_probe_work_func pstate: 80000005 (Nzcv daif -PAN -UAO) pc : ioremap_page_range+0x370/0x3c8 lr : ioremap_page_range+0x40/0x3c8 sp : ffff000008da39e0 x29: ffff000008da39e0 x28: 00e8000000000f07 x27: ffff7dfffee00000 x26: 0140000000000000 x25: ffff7dfffef00000 x24: 00000000000fe100 x23: ffff80007b906000 x22: ffff000008ab8000 x21: ffff000008bb1d58 x20: ffff7dfffef00000 x19: ffff800009c30fb8 x18: 0000000000000001 x17: 00000000000152d0 x16: 00000000014012d0 x15: 0000000000000000 x14: 0720072007200720 x13: 0720072007200720 x12: 0720072007200720 x11: 0720072007300730 x10: 00000000000000ae x9 : 0000000000000000 x8 : ffff7dffff000000 x7 : 0000000000000000 x6 : 0000000000000100 x5 : 0000000000000000 x4 : 000000007b906000 x3 : ffff80007c61a880 x2 : ffff7dfffeefffff x1 : 0000000040000000 x0 : 00e80000fe100f07 Process kworker/0:1 (pid: 39, stack limit = 0x (ptrval)) Call trace: ioremap_page_range+0x370/0x3c8 pci_remap_iospace+0x7c/0xac pci_parse_request_of_pci_ranges+0x13c/0x190 rcar_pcie_probe+0x4c/0xb04 platform_drv_probe+0x50/0xbc driver_probe_device+0x21c/0x308 __device_attach_driver+0x98/0xc8 bus_for_each_drv+0x54/0x94 __device_attach+0xc4/0x12c device_initial_probe+0x10/0x18 bus_probe_device+0x90/0x98 deferred_probe_work_func+0xb0/0x150 process_one_work+0x12c/0x29c worker_thread+0x200/0x3fc kthread+0x108/0x134 ret_from_fork+0x10/0x18 Code: f9004ba2 54000080 aa0003fb 17ffff48 (d4210000) It turned out that pci_remap_iospace() wasn't undone when the driver's probe failed, and since devm_phy_optional_get() returned -EPROBE_DEFER, the probe was retried, finally causing the BUG due to trying to remap already remapped pages. Introduce the devm_pci_remap_iospace() managed API and replace the pci_remap_iospace() call with it to fix the bug. Fixes: dbf9826d5797 ("PCI: generic: Convert to DT resource parsing API") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> [lorenzo.pieralisi@arm.com: split commit/updated the commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2018-07-06PCI: Export pcie_get_speed_cap and pcie_get_width_capAlex Deucher1-0/+3
So drivers can use them. This can be used to replace duplicate code in the drm subsystem. Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-06-30PCI: Enable PASID only if entire path supports End-End TLP prefixesSinan Kaya1-0/+1
A PCIe endpoint carries the process address space identifier (PASID) in the TLP prefix as part of the memory read/write transaction. The address information in the TLP is relevant only for a given PASID context. An IOMMU takes PASID value and the address information from the TLP to look up the physical address in the system. PASID is an End-End TLP Prefix (PCIe r4.0, sec 6.20). Sec 2.2.10.2 says It is an error to receive a TLP with an End-End TLP Prefix by a Receiver that does not support End-End TLP Prefixes. A TLP in violation of this rule is handled as a Malformed TLP. This is a reported error associated with the Receiving Port (see Section 6.2). Prevent error condition by proactively requiring End-End TLP prefix to be supported on the entire data path between the endpoint and the root port before enabling PASID. Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-06-30PCI: Make pci_get_rom_size() staticBjorn Helgaas1-1/+0
pci_get_rom_size() is called only from pci_map_rom(), so it can be static. Make it static and remove the declaration from include/linux/pci.h. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-06-26PCI: shpchp: Separate existence of SHPC and permission to use itBjorn Helgaas1-0/+1
The shpchp driver registers for all PCI bridge devices. Its probe method should fail if either (1) the bridge doesn't have an SHPC or (2) the OS isn't allowed to use it (the platform firmware may be operating the SHPC itself). Separate these two tests into: - A new shpc_capable() that looks for the SHPC hardware and is applicable on all systems (ACPI and non-ACPI), and - A simplified acpi_get_hp_hw_control_from_firmware() that we call only when we already know an SHPC exists and there may be ACPI methods to either request permission to use it (_OSC) or transfer control to the OS (OSHP). acpi_get_hp_hw_control_from_firmware() is implemented when CONFIG_ACPI=y, but does nothing if the current platform doesn't support ACPI. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2018-06-07Merge tag 'pci-v4.18-changes' of ↵Linus Torvalds1-7/+14
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - unify AER decoding for native and ACPI CPER sources (Alexandru Gagniuc) - add TLP header info to AER tracepoint (Thomas Tai) - add generic pcie_wait_for_link() interface (Oza Pawandeep) - handle AER ERR_FATAL by removing and re-enumerating devices, as Downstream Port Containment does (Oza Pawandeep) - factor out common code between AER and DPC recovery (Oza Pawandeep) - stop triggering DPC for ERR_NONFATAL errors (Oza Pawandeep) - share ERR_FATAL recovery path between AER and DPC (Oza Pawandeep) - disable ASPM L1.2 substate if we don't have LTR (Bjorn Helgaas) - respect platform ownership of LTR (Bjorn Helgaas) - clear interrupt status in top half to avoid interrupt storm (Oza Pawandeep) - neaten pci=earlydump output (Andy Shevchenko) - avoid errors when extended config space inaccessible (Gilles Buloz) - prevent sysfs disable of device while driver attached (Christoph Hellwig) - use core interface to report PCIe link properties in bnx2x, bnxt_en, cxgb4, ixgbe (Bjorn Helgaas) - remove unused pcie_get_minimum_link() (Bjorn Helgaas) - fix use-before-set error in ibmphp (Dan Carpenter) - fix pciehp timeouts caused by Command Completed errata (Bjorn Helgaas) - fix refcounting in pnv_php hotplug (Julia Lawall) - clear pciehp Presence Detect and Data Link Layer Status Changed on resume so we don't miss hotplug events (Mika Westerberg) - only request pciehp control if we support it, so platform can use ACPI hotplug otherwise (Mika Westerberg) - convert SHPC to be builtin only (Mika Westerberg) - request SHPC control via _OSC if we support it (Mika Westerberg) - simplify SHPC handoff from firmware (Mika Westerberg) - fix an SHPC quirk that mistakenly included *all* AMD bridges as well as devices from any vendor with device ID 0x7458 (Bjorn Helgaas) - assign a bus number even to non-native hotplug bridges to leave space for acpiphp additions, to fix a common Thunderbolt xHCI hot-add failure (Mika Westerberg) - keep acpiphp from scanning native hotplug bridges, to fix common Thunderbolt hot-add failures (Mika Westerberg) - improve "partially hidden behind bridge" messages from core (Mika Westerberg) - add macros for PCIe Link Control 2 register (Frederick Lawler) - replace IB/hfi1 custom macros with PCI core versions (Frederick Lawler) - remove dead microblaze and xtensa code (Bjorn Helgaas) - use dev_printk() when possible in xtensa and mips (Bjorn Helgaas) - remove unused pcie_port_acpi_setup() and portdrv_acpi.c (Bjorn Helgaas) - add managed interface to get PCI host bridge resources from OF (Jan Kiszka) - add support for unbinding generic PCI host controller (Jan Kiszka) - fix memory leaks when unbinding generic PCI host controller (Jan Kiszka) - request legacy VGA framebuffer only for VGA devices to avoid false device conflicts (Bjorn Helgaas) - turn on PCI_COMMAND_IO & PCI_COMMAND_MEMORY in pci_enable_device() like everybody else, not in pcibios_fixup_bus() (Bjorn Helgaas) - add generic enable function for simple SR-IOV hardware (Alexander Duyck) - use generic SR-IOV enable for ena, nvme (Alexander Duyck) - add ACS quirk for Intel 7th & 8th Gen mobile (Alex Williamson) - add ACS quirk for Intel 300 series (Mika Westerberg) - enable register clock for Armada 7K/8K (Gregory CLEMENT) - reduce Keystone "link already up" log level (Fabio Estevam) - move private DT functions to drivers/pci/ (Rob Herring) - factor out dwc CONFIG_PCI Kconfig dependencies (Rob Herring) - add DesignWare support to the endpoint test driver (Gustavo Pimentel) - add DesignWare support for endpoint mode (Gustavo Pimentel) - use devm_ioremap_resource() instead of devm_ioremap() in dra7xx and artpec6 (Gustavo Pimentel) - fix Qualcomm bitwise NOT issue (Dan Carpenter) - add Qualcomm runtime PM support (Srinivas Kandagatla) - fix DesignWare enumeration below bridges (Koen Vandeputte) - use usleep() instead of mdelay() in endpoint test (Jia-Ju Bai) - add configfs entries for pci_epf_driver device IDs (Kishon Vijay Abraham I) - clean up pci_endpoint_test driver (Gustavo Pimentel) - update Layerscape maintainer email addresses (Minghuan Lian) - add COMPILE_TEST to improve build test coverage (Rob Herring) - fix Hyper-V bus registration failure caused by domain/serial number confusion (Sridhar Pitchai) - improve Hyper-V refcounting and coding style (Stephen Hemminger) - avoid potential Hyper-V hang waiting for a response that will never come (Dexuan Cui) - implement Mediatek chained IRQ handling (Honghui Zhang) - fix vendor ID & class type for Mediatek MT7622 (Honghui Zhang) - add Mobiveil PCIe host controller driver (Subrahmanya Lingappa) - add Mobiveil MSI support (Subrahmanya Lingappa) - clean up clocks, MSI, IRQ mappings in R-Car probe failure paths (Marek Vasut) - poll more frequently (5us vs 5ms) while waiting for R-Car data link active (Marek Vasut) - use generic OF parsing interface in R-Car (Vladimir Zapolskiy) - add R-Car V3H (R8A77980) "compatible" string (Sergei Shtylyov) - add R-Car gen3 PHY support (Sergei Shtylyov) - improve R-Car PHYRDY polling (Sergei Shtylyov) - clean up R-Car macros (Marek Vasut) - use runtime PM for R-Car controller clock (Dien Pham) - update arm64 defconfig for Rockchip (Shawn Lin) - refactor Rockchip code to facilitate both root port and endpoint mode (Shawn Lin) - add Rockchip endpoint mode driver (Shawn Lin) - support VMD "membar shadow" feature (Jon Derrick) - support VMD bus number offsets (Jon Derrick) - add VMD "no AER source ID" quirk for more device IDs (Jon Derrick) - remove unnecessary host controller CONFIG_PCIEPORTBUS Kconfig selections (Bjorn Helgaas) - clean up quirks.c organization and whitespace (Bjorn Helgaas) * tag 'pci-v4.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (144 commits) PCI/AER: Replace struct pcie_device with pci_dev PCI/AER: Remove unused parameters PCI: qcom: Include gpio/consumer.h PCI: Improve "partially hidden behind bridge" log message PCI: Improve pci_scan_bridge() and pci_scan_bridge_extend() doc PCI: Move resource distribution for single bridge outside loop PCI: Account for all bridges on bus when distributing bus numbers ACPI / hotplug / PCI: Drop unnecessary parentheses ACPI / hotplug / PCI: Mark stale PCI devices disconnected ACPI / hotplug / PCI: Don't scan bridges managed by native hotplug PCI: hotplug: Add hotplug_is_native() PCI: shpchp: Add shpchp_is_native() PCI: shpchp: Fix AMD POGO identification PCI: mobiveil: Add MSI support PCI: mobiveil: Add Mobiveil PCIe Host Bridge IP driver PCI/AER: Decode Error Source Requester ID PCI/AER: Remove aer_recover_work_func() forward declaration PCI/DPC: Use the generic pcie_do_fatal_recovery() path PCI/AER: Pass service type to pcie_do_fatal_recovery() PCI/DPC: Disable ERR_NONFATAL handling by DPC ...
2018-06-07Merge branch 'pci/virtualization'Bjorn Helgaas1-0/+4
- add generic enable function for simple SR-IOV hardware (Alexander Duyck) - use generic SR-IOV enable for ena, nvme (Alexander Duyck) - add ACS quirk for Intel 7th & 8th Gen mobile (Alex Williamson) - add ACS quirk for Intel 300 series (Mika Westerberg) * pci/virtualization: PCI/IOV: Allow PF drivers to limit total_VFs to 0 PCI: Add "pci=noats" boot parameter PCI: Add ACS quirk for Intel 300 series PCI: Add ACS quirk for Intel 7th & 8th Gen mobile nvme-pci: Use pci_sriov_configure_simple() to enable VFs net: ena: Use pci_sriov_configure_simple() to enable VFs PCI/IOV: Add pci-pf-stub driver for PFs that only enable VFs PCI/IOV: Add pci_sriov_configure_simple()
2018-06-07Merge branch 'pci/resource'Bjorn Helgaas1-3/+0
- add managed interface to get PCI host bridge resources from OF (Jan Kiszka) - add support for unbinding generic PCI host controller (Jan Kiszka) - fix memory leaks when unbinding generic PCI host controller (Jan Kiszka) * pci/resource: PCI: Enable PCI_DOMAINS along with generic PCI host controller PCI: Add support for unbinding the generic PCI host controller PCI: Rework of_pci_get_host_bridge_resources() to devm_of_pci_get_host_bridge_resources() PCI: Use dev_printk() in of_pci_get_host_bridge_resources() PCI: Pass struct device to of_pci_get_host_bridge_resources() PCI: Rename of_pci_get_host_bridge_resources() device node parameter PCI: Fix devm_pci_alloc_host_bridge() memory leak PCI: Make pci_get_new_domain_nr() static
2018-06-07Merge branch 'pci/hotplug'Bjorn Helgaas1-1/+7
- fix use-before-set error in ibmphp (Dan Carpenter) - fix pciehp timeouts caused by Command Completed errata (Bjorn Helgaas) - fix refcounting in pnv_php hotplug (Julia Lawall) - clear pciehp Presence Detect and Data Link Layer Status Changed on resume so we don't miss hotplug events (Mika Westerberg) - only request pciehp control if we support it, so platform can use ACPI hotplug otherwise (Mika Westerberg) - convert SHPC to be builtin only (Mika Westerberg) - request SHPC control via _OSC if we support it (Mika Westerberg) - simplify SHPC handoff from firmware (Mika Westerberg) * pci/hotplug: PCI: Improve "partially hidden behind bridge" log message PCI: Improve pci_scan_bridge() and pci_scan_bridge_extend() doc PCI: Move resource distribution for single bridge outside loop PCI: Account for all bridges on bus when distributing bus numbers ACPI / hotplug / PCI: Drop unnecessary parentheses ACPI / hotplug / PCI: Mark stale PCI devices disconnected ACPI / hotplug / PCI: Don't scan bridges managed by native hotplug PCI: hotplug: Add hotplug_is_native() PCI: shpchp: Add shpchp_is_native() PCI: shpchp: Fix AMD POGO identification PCI: shpchp: Use dev_printk() for OSHP-related messages PCI: shpchp: Remove get_hp_hw_control_from_firmware() wrapper PCI: shpchp: Remove acpi_get_hp_hw_control_from_firmware() flags PCI: shpchp: Rely on previous _OSC results PCI: shpchp: Request SHPC control via _OSC when adding host bridge PCI: shpchp: Convert SHPC to be builtin only PCI: pciehp: Make pciehp_is_native() stricter PCI: pciehp: Rename host->native_hotplug to host->native_pcie_hotplug PCI: pciehp: Request control of native hotplug only if supported PCI: pciehp: Clear Presence Detect and Data Link Layer Status Changed on resume PCI: pnv_php: Add missing of_node_put() PCI: pciehp: Add quirk for Command Completed errata PCI: Add Qualcomm vendor ID PCI: ibmphp: Fix use-before-set in get_max_bus_speed() # Conflicts: # drivers/acpi/pci_root.c
2018-06-07Merge branch 'pci/enumeration'Bjorn Helgaas1-2/+1
- neaten pci=earlydump output (Andy Shevchenko) - avoid errors when extended config space inaccessible (Gilles Buloz) - prevent sysfs disable of device while driver attached (Christoph Hellwig) - use core interface to report PCIe link properties in bnx2x, bnxt_en, cxgb4, ixgbe (Bjorn Helgaas) - remove unused pcie_get_minimum_link() (Bjorn Helgaas) * pci/enumeration: PCI: Remove unused pcie_get_minimum_link() ixgbe: Report PCIe link properties with pcie_print_link_status() cxgb4: Report PCIe link properties with pcie_print_link_status() bnxt_en: Report PCIe link properties with pcie_print_link_status() bnx2x: Report PCIe link properties with pcie_print_link_status() PCI: Prevent sysfs disable of device while driver is attached PCI: Check whether bridges allow access to extended config space x86/PCI: Make pci=earlydump output neat
2018-06-07Merge branch 'pci/aspm'Bjorn Helgaas1-0/+1
- disable ASPM L1.2 substate if we don't have LTR (Bjorn Helgaas) - respect platform ownership of LTR (Bjorn Helgaas) * pci/aspm: PCI/ACPI: Request LTR control from platform before using it PCI/ASPM: Disable ASPM L1.2 Substate if we don't have LTR
2018-06-02PCI: shpchp: Request SHPC control via _OSC when adding host bridgeMika Westerberg1-0/+1
The SHPC driver now must be builtin (it cannot be a module). If it is present, request SHPC control immediately when adding the ACPI host bridge. This is similar to how we handle native PCIe hotplug via pciehp. Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> [bhelgaas: split to separate patch] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-06-02PCI: pciehp: Make pciehp_is_native() stricterMika Westerberg1-0/+2
Previously pciehp_is_native() returned true for any PCI device in a hierarchy where _OSC says we can use pciehp. This is incorrect because bridges without PCI_EXP_SLTCAP_HPC capability should be managed by acpiphp instead. Improve pciehp_is_native() to return true only when PCI_EXP_SLTCAP_HPC is set and the pciehp driver is present. In any other case return false to let acpiphp handle those. Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> [bhelgaas: remove NULL pointer check] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-06-02PCI: pciehp: Rename host->native_hotplug to host->native_pcie_hotplugMika Westerberg1-1/+1
Rename host->native_hotplug to host->native_pcie_hotplug to make room for a similar flag for SHPC hotplug. Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> [bhelgaas: split to separate patch] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-05-26PCI: Remove unused pcie_get_minimum_link()Bjorn Helgaas1-2/+0
In some cases pcie_get_minimum_link() returned misleading information because it found the slowest link and the narrowest link without considering the total bandwidth of the link. For example, consider a path with these two links: - 16.0 GT/s x1 link (16.0 * 10^9 * 128 / 130) * 1 / 8 = 1969 MB/s - 2.5 GT/s x16 link ( 2.5 * 10^9 * 8 / 10) * 16 / 8 = 4000 MB/s The available bandwidth of the path is limited by the 16 GT/s link to about 1969 MB/s, but pcie_get_minimum_link() returned 2.5 GT/s x1, which corresponds to only 250 MB/s. Callers should use pcie_print_link_status() instead, or pcie_bandwidth_available() if they need more detailed information. Remove pcie_get_minimum_link() since there are no callers left. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-05-18PCI/AER: Factor out error reporting to drivers/pci/pcie/err.cOza Pawandeep1-1/+1
Move the error reporting callbacks from aerdrv_core.c to err.c, where they can be used by DPC in addition to AER. As part of aerdrv_core.c, these callbacks were built under CONFIG_PCIEAER. Moving them to the new err.c means they will now be built under CONFIG_PCIEPORTBUS, so adjust the definition of pci_uevent_ers() to match. Signed-off-by: Oza Pawandeep <poza@codeaurora.org> [bhelgaas: in reset_link(), initialize "driver" even if CONFIG_PCIEAER is unset, update pci_uevent_ers() #ifdef wrapper] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-05-15PCI: Make pci_get_new_domain_nr() staticJan Kiszka1-3/+0
The only user of pci_get_new_domain_nr() is of_pci_bus_find_domain_nr(). Since they are defined in the same file, pci_get_new_domain_nr() can be made static, which also simplifies preprocessor conditionals. No functional change intended. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2018-05-11PCI: Add "pci=noats" boot parameterGil Kupfer1-0/+2
Adds a "pci=noats" boot parameter. When supplied, all ATS related functions fail immediately and the IOMMU is configured to not use device-IOTLB. Any function that checks for ATS capabilities directly against the devices should also check this flag. Currently, such functions exist only in IOMMU drivers, and they are covered by this patch. The motivation behind this patch is the existence of malicious devices. Lots of research has been done about how to use the IOMMU as protection from such devices. When ATS is supported, any I/O device can access any physical address by faking device-IOTLB entries. Adding the ability to ignore these entries lets sysadmins enhance system security. Signed-off-by: Gil Kupfer <gilkup@cs.technion.ac.il> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Joerg Roedel <jroedel@suse.de>
2018-05-09PCI: remove CONFIG_PCI_BUS_ADDR_T_64BITChristoph Hellwig1-1/+1
This symbol is now always identical to CONFIG_ARCH_DMA_ADDR_T_64BIT, so remove it. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2018-05-08PCI: Check whether bridges allow access to extended config spaceGilles Buloz1-0/+1
Even if a device supports extended config space, i.e., it is a PCI-X Mode 2 or a PCI Express device, the extended space may not be accessible if there's a conventional PCI bus in the path to it. We currently figure that out in pci_cfg_space_size() by reading the first dword of extended config space. On most platforms that returns ~0 data if the space is inaccessible, but it may set error bits in PCI status registers, and on some platforms it causes exceptions that we currently don't recover from. For example, a PCIe-to-conventional PCI bridge treats config transactions with a non-zero Extended Register Address as an Unsupported Request on PCIe and a received Master-Abort on the destination bus (see PCI Express to PCI/PCI-X Bridge spec, r1.0, sec 4.1.3). A sample case is a LS1043A CPU (NXP QorIQ Layerscape) platform with the following bus topology: LS1043 PCIe Root Port -> PEX8112 PCIe-to-PCI bridge (doesn't support ext cfg on PCI side) -> PMC slot connector (for legacy PMC modules) With a PMC module topology as follows: PMC connector -> PCI-to-PCIe bridge -> PCIe switch (4 ports) -> 4 PCIe devices (one on each port) The PCIe devices on the PMC module support extended config space, but we can't reach it because the PEX8112 can't generate accesses to the extended space on its secondary bus. Attempts to access it cause Unsupported Request errors, which result in synchronous aborts on this platform. To avoid these errors, check whether bridges are capable of generating extended config space addresses on their secondary interfaces. If they can't, we restrict devices below the bridge to only the 256-byte PCI-compatible config space. Signed-off-by: Gilles Buloz <gilles.buloz@kontron.com> [bhelgaas: changelog, rework patch so bus_flags testing is all in pci_bridge_child_ext_cfg_accessible()] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-05-08PCI: pciehp: Add quirk for Command Completed errataBjorn Helgaas1-0/+3
Several PCIe hotplug controllers have errata that mean they do not set the Command Completed bit unless writes to the Slot Command register change "Control" bits. Command Completed is never set for writes that only change software notification "Enable" bits. This results in timeouts like this: pciehp 0000:00:1c.0:pcie004: Timeout on hotplug command 0x1038 (issued 65284 msec ago) When this erratum is present, avoid these timeouts by marking commands "completed" immediately unless they change the "Control" bits. Here's the text of the Intel erratum CF118. We assume this applies to all Intel parts: CF118 PCIe Slot Status Register Command Completed bit not always updated on any configuration write to the Slot Control Register Problem: For PCIe root ports (devices 0 - 10) supporting hot-plug, the Slot Status Register (offset AAh) Command Completed (bit[4]) status is updated under the following condition: IOH will set Command Completed bit after delivering the new commands written in the Slot Controller register (offset A8h) to VPP. The IOH detects new commands written in Slot Control register by checking the change of value for Power Controller Control (bit[10]), Power Indicator Control (bits[9:8]), Attention Indicator Control (bits[7:6]), or Electromechanical Interlock Control (bit[11]) fields. Any other configuration writes to the Slot Control register without changing the values of these fields will not cause Command Completed bit to be set. The PCIe Base Specification Revision 2.0 or later describes the “Slot Control Register” in section 7.8.10, as follows (Reference section 7.8.10, Slot Control Register, Offset 18h). In hot-plug capable Downstream Ports, a write to the Slot Control register must cause a hot-plug command to be generated (see Section 6.7.3.2 for details on hot-plug commands). A write to the Slot Control register in a Downstream Port that is not hotplug capable must not cause a hot-plug command to be executed. The PCIe Spec intended that every write to the Slot Control Register is a command and expected a command complete status to abstract the VPP implementation specific nuances from the OS software. IOH PCIe Slot Control Register implementation is not fully conforming to the PCIe Specification in this respect. Implication: Software checking on the Command Completed status after writing to the Slot Control register may time out. Workaround: Software can read the Slot Control register and compare the existing and new values to determine if it should check the Command Completed status after writing to the Slot Control register. Per Sinan, the Qualcomm QDF2400 controller also does not set the Command Completed bit unless writes to the Slot Command register change "Control" bits. Link: http://www.intel.com/content/www/us/en/processors/xeon/xeon-e7-v2-spec-update.html Link: https://lkml.kernel.org/r/8770820b-85a0-172b-7230-3a44524e6c9f@molgen.mpg.de Reported-by: Paul Menzel <pmenzel+linux-pci@molgen.mpg.de> # Lenovo X60 Tested-by: Paul Menzel <pmenzel+linux-pci@molgen.mpg.de> # Lenovo X60 Signed-off-by: Sinan Kaya <okaya@codeaurora.org> # Qcom quirk Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2018-04-25PCI/IOV: Add pci_sriov_configure_simple()Alexander Duyck1-0/+2
SR-IOV (Single Root I/O Virtualization) is an optional PCIe capability (see PCIe r4.0, sec 9). A PCIe Function with the SR-IOV capability is referred to as a PF (Physical Function). If SR-IOV is enabled on the PF, several VFs (Virtual Functions) may be created. The VFs can be individually assigned to virtual machines, which allows them to share a single hardware device while being isolated from each other. Some SR-IOV devices have resources such as queues and interrupts that must be set up in the PF before enabling the VFs, so they require a PF driver to do that. Other SR-IOV devices don't require any PF setup before enabling VFs. Add a pci_sriov_configure_simple() interface so PF drivers for such devices can use it without repeating the VF-enabling code. Tested-by: Mark Rustad <mark.d.rustad@intel.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> [bhelgaas: changelog, comment] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Greg Rose <gvrose8192@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de>:wq
2018-04-23PCI/ACPI: Request LTR control from platform before using itBjorn Helgaas1-0/+1
Per the PCI Firmware spec r3.2, sec 4.5, an ACPI-based OS should use _OSC to request control of Latency Tolerance Reporting (LTR) before using it. Request control of LTR, and if the platform does not grant control, don't use it. N.B. If the hardware supports LTR and the ASPM L1.2 substate but the BIOS doesn't support LTR in _OSC, we previously would enable ASPM L1.2. This patch will prevent us from enabling ASPM L1.2 in that case. It does not prevent us from enabling PCI-PM L1.2, since that doesn't depend on LTR. See PCIe r40, sec 5.5.1, for the L1 PM substate entry conditions. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-04-07Merge tag 'pci-v4.17-changes' of ↵Linus Torvalds1-62/+32
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - move pci_uevent_ers() out of pci.h (Michael Ellerman) - skip ASPM common clock warning if BIOS already configured it (Sinan Kaya) - fix ASPM Coverity warning about threshold_ns (Gustavo A. R. Silva) - remove last user of pci_get_bus_and_slot() and the function itself (Sinan Kaya) - add decoding for 16 GT/s link speed (Jay Fang) - add interfaces to get max link speed and width (Tal Gilboa) - add pcie_bandwidth_capable() to compute max supported link bandwidth (Tal Gilboa) - add pcie_bandwidth_available() to compute bandwidth available to device (Tal Gilboa) - add pcie_print_link_status() to log link speed and whether it's limited (Tal Gilboa) - use PCI core interfaces to report when device performance may be limited by its slot instead of doing it in each driver (Tal Gilboa) - fix possible cpqphp NULL pointer dereference (Shawn Lin) - rescan more of the hierarchy on ACPI hotplug to fix Thunderbolt/xHCI hotplug (Mika Westerberg) - add support for PCI I/O port space that's neither directly accessible via CPU in/out instructions nor directly mapped into CPU physical memory space. This is fairly intrusive and includes minor changes to interfaces used for I/O space on most platforms (Zhichang Yuan, John Garry) - add support for HiSilicon Hip06/Hip07 LPC I/O space (Zhichang Yuan, John Garry) - use PCI_EXP_DEVCTL2_COMP_TIMEOUT in rapidio/tsi721 (Bjorn Helgaas) - remove possible NULL pointer dereference in of_pci_bus_find_domain_nr() (Shawn Lin) - report quirk timings with dev_info (Bjorn Helgaas) - report quirks that take longer than 10ms (Bjorn Helgaas) - add and use Altera Vendor ID (Johannes Thumshirn) - tidy Makefiles and comments (Bjorn Helgaas) - don't set up INTx if MSI or MSI-X is enabled to align cris, frv, ia64, and mn10300 with x86 (Bjorn Helgaas) - move pcieport_if.h to drivers/pci/pcie/ to encapsulate it (Frederick Lawler) - merge pcieport_if.h into portdrv.h (Bjorn Helgaas) - move workaround for BIOS PME issue from portdrv to PCI core (Bjorn Helgaas) - completely disable portdrv with "pcie_ports=compat" (Bjorn Helgaas) - remove portdrv link order dependency (Bjorn Helgaas) - remove support for unused VC portdrv service (Bjorn Helgaas) - simplify portdrv feature permission checking (Bjorn Helgaas) - remove "pcie_hp=nomsi" parameter (use "pci=nomsi" instead) (Bjorn Helgaas) - remove unnecessary "pcie_ports=auto" parameter (Bjorn Helgaas) - use cached AER capability offset (Frederick Lawler) - don't enable DPC if BIOS hasn't granted AER control (Mika Westerberg) - rename pcie-dpc.c to dpc.c (Bjorn Helgaas) - use generic pci_mmap_resource_range() instead of powerpc and xtensa arch-specific versions (David Woodhouse) - support arbitrary PCI host bridge offsets on sparc (Yinghai Lu) - remove System and Video ROM reservations on sparc (Bjorn Helgaas) - probe for device reset support during enumeration instead of runtime (Bjorn Helgaas) - add ACS quirk for Ampere (née APM) root ports (Feng Kan) - add function 1 DMA alias quirk for Marvell 88SE9220 (Thomas Vincent-Cross) - protect device restore with device lock (Sinan Kaya) - handle failure of FLR gracefully (Sinan Kaya) - handle CRS (config retry status) after device resets (Sinan Kaya) - skip various config reads for SR-IOV VFs as an optimization (KarimAllah Ahmed) - consolidate VPD code in vpd.c (Bjorn Helgaas) - add Tegra dependency on PCI_MSI_IRQ_DOMAIN (Arnd Bergmann) - add DT support for R-Car r8a7743 (Biju Das) - fix a PCI_EJECT vs PCI_BUS_RELATIONS race condition in Hyper-V host bridge driver that causes a general protection fault (Dexuan Cui) - fix Hyper-V host bridge hang in MSI setup on 1-vCPU VMs with SR-IOV (Dexuan Cui) - fix Hyper-V host bridge hang when ejecting a VF before setting up MSI (Dexuan Cui) - make several structures static (Fengguang Wu) - increase number of MSI IRQs supported by Synopsys DesignWare bridges from 32 to 256 (Gustavo Pimentel) - implemented multiplexed IRQ domain API and remove obsolete MSI IRQ API from DesignWare drivers (Gustavo Pimentel) - add Tegra power management support (Manikanta Maddireddy) - add Tegra loadable module support (Manikanta Maddireddy) - handle 64-bit BARs correctly in endpoint support (Niklas Cassel) - support optional regulator for HiSilicon STB (Shawn Guo) - use regulator bulk API for Qualcomm apq8064 (Srinivas Kandagatla) - support power supplies for Qualcomm msm8996 (Srinivas Kandagatla) * tag 'pci-v4.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (123 commits) MAINTAINERS: Add John Garry as maintainer for HiSilicon LPC driver HISI LPC: Add ACPI support ACPI / scan: Do not enumerate Indirect IO host children ACPI / scan: Rename acpi_is_serial_bus_slave() for more general use HISI LPC: Support the LPC host on Hip06/Hip07 with DT bindings of: Add missing I/O range exception for indirect-IO devices PCI: Apply the new generic I/O management on PCI IO hosts PCI: Add fwnode handler as input param of pci_register_io_range() PCI: Remove __weak tag from pci_register_io_range() MAINTAINERS: Add missing /drivers/pci/cadence directory entry fm10k: Report PCIe link properties with pcie_print_link_status() net/mlx5e: Use pcie_bandwidth_available() to compute bandwidth net/mlx5: Report PCIe link properties with pcie_print_link_status() net/mlx4_core: Report PCIe link properties with pcie_print_link_status() PCI: Add pcie_print_link_status() to log link speed and whether it's limited PCI: Add pcie_bandwidth_available() to compute bandwidth available to device misc: pci_endpoint_test: Handle 64-bit BARs properly PCI: designware-ep: Make dw_pcie_ep_reset_bar() handle 64-bit BARs properly PCI: endpoint: Make sure that BAR_5 does not have 64-bit flag set when clearing PCI: endpoint: Make epc->ops->clear_bar()/pci_epc_clear_bar() take struct *epf_bar ...
2018-04-04Merge branch 'pci/virtualization'Bjorn Helgaas1-3/+8
- probe for device reset support during enumeration instead of runtime (Bjorn Helgaas) - add ACS quirk for Ampere (née APM) root ports (Feng Kan) - add function 1 DMA alias quirk for Marvell 88SE9220 (Thomas Vincent-Cross) - protect device restore with device lock (Sinan Kaya) - handle failure of FLR gracefully (Sinan Kaya) - handle CRS (config retry status) after device resets (Sinan Kaya) - skip various config reads for SR-IOV VFs as an optimization (KarimAllah Ahmed) * pci/virtualization: PCI/IOV: Add missing prototypes for powerpc pcibios interfaces PCI/IOV: Use VF0 cached config registers for other VFs PCI/IOV: Skip BAR sizing for VFs PCI/IOV: Skip INTx config reads for VFs PCI: Wait for device to become ready after secondary bus reset PCI: Add a return type for pci_reset_bridge_secondary_bus() PCI: Wait for device to become ready after a power management reset PCI: Rename pci_flr_wait() to pci_dev_wait() and make it generic PCI: Handle FLR failure and allow other reset types PCI: Protect restore with device lock to be consistent PCI: Add function 1 DMA alias quirk for Marvell 88SE9220 PCI: Add ACS quirk for Ampere root ports PCI: Remove redundant probes for device reset support PCI: Probe for device reset support during enumeration Conflicts: include/linux/pci.h
2018-04-04Merge branch 'pci/portdrv'Bjorn Helgaas1-2/+3
- move pcieport_if.h to drivers/pci/pcie/ to encapsulate it (Frederick Lawler) - merge pcieport_if.h into portdrv.h (Bjorn Helgaas) - move workaround for BIOS PME issue from portdrv to PCI core (Bjorn Helgaas) - completely disable portdrv with "pcie_ports=compat" (Bjorn Helgaas) - remove portdrv link order dependency (Bjorn Helgaas) - remove support for unused VC portdrv service (Bjorn Helgaas) - simplify portdrv feature permission checking (Bjorn Helgaas) - remove "pcie_hp=nomsi" parameter (use "pci=nomsi" instead) (Bjorn Helgaas) - remove unnecessary "pcie_ports=auto" parameter (Bjorn Helgaas) - use cached AER capability offset (Frederick Lawler) - don't enable DPC if BIOS hasn't granted AER control (Mika Westerberg) - rename pcie-dpc.c to dpc.c (Bjorn Helgaas) * pci/portdrv: PCI/DPC: Rename from pcie-dpc.c to dpc.c PCI/DPC: Do not enable DPC if AER control is not allowed by the BIOS PCI/AER: Use cached AER Capability offset PCI/portdrv: Rename and reverse sense of pcie_ports_auto PCI/portdrv: Encapsulate pcie_ports_auto inside the port driver PCI/portdrv: Remove unnecessary "pcie_ports=auto" parameter PCI/portdrv: Remove "pcie_hp=nomsi" kernel parameter PCI/portdrv: Remove unnecessary include of <linux/pci-aspm.h> PCI/portdrv: Simplify PCIe feature permission checking PCI/portdrv: Remove unused PCIE_PORT_SERVICE_VC PCI/portdrv: Remove pcie_port_bus_type link order dependency PCI/portdrv: Disable port driver in compat mode PCI/PM: Clear PCIe PME Status bit for Root Complex Event Collectors PCI/PM: Clear PCIe PME Status bit in core, not PCIe port driver PCI/PM: Move pcie_clear_root_pme_status() to core PCI/portdrv: Merge pcieport_if.h into portdrv.h PCI/portdrv: Move pcieport_if.h to drivers/pci/pcie/ Conflicts: drivers/pci/pcie/Makefile drivers/pci/pcie/portdrv.h
2018-04-04Merge branch 'pci/misc'Bjorn Helgaas1-13/+11
- use PCI_EXP_DEVCTL2_COMP_TIMEOUT in rapidio/tsi721 (Bjorn Helgaas) - remove possible NULL pointer dereference in of_pci_bus_find_domain_nr() (Shawn Lin) - report quirk timings with dev_info (Bjorn Helgaas) - report quirks that take longer than 10ms (Bjorn Helgaas) - add and use Altera Vendor ID (Johannes Thumshirn) - tidy Makefiles and comments (Bjorn Helgaas) * pci/misc: PCI: Always define the of_node helpers PCI: Tidy comments PCI: Tidy Makefiles mcb: Add Altera PCI ID to mcb-pci PCI: Add Altera vendor ID PCI: Report quirks that take more than 10ms PCI: Report quirk timings with pci_info() instead of pr_debug() PCI: Fix NULL pointer dereference in of_pci_bus_find_domain_nr() rapidio/tsi721: use PCI_EXP_DEVCTL2_COMP_TIMEOUT macro
2018-04-04Merge branch 'pci/lpc'Bjorn Helgaas1-1/+2
- add support for PCI I/O port space that's neither directly accessible via CPU in/out instructions nor directly mapped into CPU physical memory space (Zhichang Yuan) - add support for HiSilicon Hip06/Hip07 LPC I/O space (Zhichang Yuan, John Garry) * pci/lpc: MAINTAINERS: Add John Garry as maintainer for HiSilicon LPC driver HISI LPC: Add ACPI support ACPI / scan: Do not enumerate Indirect IO host children ACPI / scan: Rename acpi_is_serial_bus_slave() for more general use HISI LPC: Support the LPC host on Hip06/Hip07 with DT bindings of: Add missing I/O range exception for indirect-IO devices PCI: Apply the new generic I/O management on PCI IO hosts PCI: Add fwnode handler as input param of pci_register_io_range() PCI: Remove __weak tag from pci_register_io_range() lib: Add generic PIO mapping method
2018-04-04Merge branch 'pci/enumeration'Bjorn Helgaas1-0/+5
- add decoding for 16 GT/s link speed (Jay Fang) - add interfaces to get max link speed and width (Tal Gilboa) - add pcie_bandwidth_capable() to compute max supported link bandwidth (Tal Gilboa) - add pcie_bandwidth_available() to compute bandwidth available to device (Tal Gilboa) - add pcie_print_link_status() to log link speed and whether it's limited (Tal Gilboa) - use PCI core interfaces to report when device performance may be limited by its slot instead of doing it in each driver (Tal Gilboa) * pci/enumeration: fm10k: Report PCIe link properties with pcie_print_link_status() net/mlx5e: Use pcie_bandwidth_available() to compute bandwidth net/mlx5: Report PCIe link properties with pcie_print_link_status() net/mlx4_core: Report PCIe link properties with pcie_print_link_status() PCI: Add pcie_print_link_status() to log link speed and whether it's limited PCI: Add pcie_bandwidth_available() to compute bandwidth available to device PCI: Add pcie_bandwidth_capable() to compute max supported link bandwidth PCI: Add pcie_get_width_cap() to find max supported link width PCI: Add pcie_get_speed_cap() to find max supported link speed PCI: Add decoding for 16 GT/s link speed
2018-04-04Merge branch 'pci/deprecate-get-bus-and-slot'Bjorn Helgaas1-8/+0
- remove last user of pci_get_bus_and_slot() and the function itself (Sinan Kaya) * pci/deprecate-get-bus-and-slot: PCI: Remove pci_get_bus_and_slot() function drm/i915: Deprecate pci_get_bus_and_slot()
2018-04-04PCI: Add fwnode handler as input param of pci_register_io_range()Gabriele Paoloni1-1/+2
In preparation for having the PCI MMIO helpers use the new generic I/O space management (logical PIO) we need to add the fwnode handler as an extra input parameter. Changes the signature of pci_register_io_range() and its callers as needed. Tested-by: dann frazier <dann.frazier@canonical.com> Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Rob Herring <robh@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-13 12:48:43 +0300