summaryrefslogtreecommitdiff
path: root/include/linux/mtd/rawnand.h
AgeCommit message (Collapse)AuthorFilesLines
2020-06-26mtd: rawnand: Allocate the interface configurations dynamicallyMiquel Raynal1-3/+8
Instead of manipulating the statically allocated structure and copy timings around, allocate one at identification time and save it in the nand_chip structure once it has been initialized. All NAND chips using the same interface configuration during reset and startup, we define a helper to retrieve a single reset interface configuration object, shared across all NAND chips. We use a second pointer to always have a reference on the currently applied interface configuration, which may either point to the "best interface configuration" or to the "default reset interface configuration". Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://lore.kernel.org/linux-mtd/20200529111322.7184-29-miquel.raynal@bootlin.com
2020-06-26mtd: rawnand: Get rid of the default ONFI timing modeMiquel Raynal1-9/+0
The ->choose_interface() hook is here for manufacturer drivers to provide a better timing interface than the default one, this field is not needed anymore. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://lore.kernel.org/linux-mtd/20200529111322.7184-28-miquel.raynal@bootlin.com
2020-06-26mtd: rawnand: Add the ->choose_interface_config() hookMiquel Raynal1-0/+3
This hook can be overloaded by NAND manufacturer drivers to propose alternative timings when not following the main standards. In this case, the manufacturer drivers is responsible for choosing the best interface configuration that fits both the controller and chip capabilities. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://lore.kernel.org/linux-mtd/20200529111322.7184-23-miquel.raynal@bootlin.com
2020-06-26mtd: rawnand: s/data_interface/interface_config/Miquel Raynal1-17/+16
The name/suffix data_interface is a bit misleading in that the field or functions actually represent a configuration that can be applied by the controller/chip. Let's rename all fields/functions/hooks that are worth renaming. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2020-06-26mtd: rawnand: Hide the chip->data_interface indirectionMiquel Raynal1-0/+11
As a preparation for allocating the data interface structure dynamically (and rename it), let's avoid accessing chip->data_interface directly. Instead, we introduce a helper, nand_get_interface_config(), and use it to retrieve the current data interface configuration out of a nand_chip object. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://lore.kernel.org/linux-mtd/20200529111322.7184-19-miquel.raynal@bootlin.com
2020-06-26mtd: rawnand: Reorganize the nand_chip structureMiquel Raynal1-90/+76
Reorder fields in this structure and pack entries by theme: * The main descriptive structures * The data interface details * Bad block information * The device layout * Extra buffers matching the device layout * Internal values * External objects like the ECC controller, the ECC engine and a private data pointer. While at it, adapt the documentation style. I changed on purpose the description of @oob_poi which was weird. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://lore.kernel.org/linux-mtd/20200529111322.7184-7-miquel.raynal@bootlin.com
2020-06-26mtd: rawnand: Declare the nand_manufacturer structure out of nand_chipMiquel Raynal1-8/+12
Now that struct nand_manufacturer type is free, use it to store the nand_manufacturer_desc and the manufacturer's private data. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://lore.kernel.org/linux-mtd/20200529111322.7184-6-miquel.raynal@bootlin.com
2020-06-26mtd: rawnand: Rename the manufacturer structureMiquel Raynal1-1/+1
It is currently called nand_manufacturer but could actually be called nand_manufacturer_desc, like its instances, so that the former name is left unused for now. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://lore.kernel.org/linux-mtd/20200529111322.7184-5-miquel.raynal@bootlin.com
2020-06-26mtd: rawnand: Create a nand_chip operations structureMiquel Raynal1-14/+18
And move nand_chip hooks there. While moving entries from one structure to the other, adapt the documentation style. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://lore.kernel.org/linux-mtd/20200529111322.7184-4-miquel.raynal@bootlin.com
2020-06-26mtd: rawnand: Only use u8 instead of uint8_t in nand_chip structureMiquel Raynal1-2/+2
Mechanical change to avoid using old types. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://lore.kernel.org/linux-mtd/20200529111322.7184-3-miquel.raynal@bootlin.com
2020-06-26mtd: rawnand: Use unsigned types for nand_chip unsigned valuesMiquel Raynal1-7/+7
page_shift, phys_erase_shift, bbt_erase_shift, chip_shift, pagemask, subpagesize and badblockbits are all positive values, so declare them as unsigned. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://lore.kernel.org/linux-mtd/20200529111322.7184-2-miquel.raynal@bootlin.com
2020-05-31mtd: rawnand: Add an invalid ECC mode to discriminate with valid onesMiquel Raynal1-0/+1
NAND ECC modes (or providers) have their own enumeration but, unlike their algorithms counterpart, there is no invalid or uninitialized value to discriminate between an error and having chosen a no-ECC situation. Add an "invalid" entry for this purpose. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://lore.kernel.org/linux-mtd/20200526195633.11543-7-miquel.raynal@bootlin.com
2020-05-31mtd: rawnand: Drop OOB_FIRST placement schemeMiquel Raynal1-1/+0
This scheme has been introduced for the Davinci controller and means that the OOB area must be read *before* the rest of the data. This has nothing to do with the ECC in OOB placement as it could be understood and most importantly, there is no point in having this function out of the Davinci NAND controller driver. A DT property for this scheme has been added but never used, even by the Davinci driver which only uses this scheme to change the default nand_read_page(). Move the main read_page() helper into the Davinci driver and remove the remaining boilerplate. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://lore.kernel.org/linux-mtd/20200526195633.11543-4-miquel.raynal@bootlin.com
2020-05-31mtd: rawnand: Avoid a typedefMiquel Raynal1-3/+3
In new code, the use of typedef is discouraged. Turn this one in the raw NAND core into a regular enumeration. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://lore.kernel.org/linux-mtd/20200526195633.11543-3-miquel.raynal@bootlin.com
2020-05-31mtd: rawnand: Stop using nand_release()Miquel Raynal1-2/+0
This helper is not very useful and very often people get confused: they use nand_release() instead of nand_cleanup(). Now that all drivers have been converted to do not use nand_release() anymore, let's remove this helper. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Jonathan Corbet <corbet@lwn.net> Link: https://lore.kernel.org/linux-mtd/20200519130035.1883-63-miquel.raynal@bootlin.com
2020-05-24mtd: rawnand: Add nand_extract_bits()Miquel Raynal1-0/+4
There are cases where ECC bytes are not byte-aligned. Indeed, BCH implies using a number of ECC bits, which are not always a multiple of 8. We then need a helper like nand_extract_bits() to extract these syndromes from a buffer. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://lore.kernel.org/linux-mtd/20200519074549.23673-5-miquel.raynal@bootlin.com
2020-05-24mtd: rawnand: Propage CS selection to sub operationsBoris Brezillon1-0/+2
Some controller using the instruction parse infrastructure might need to know which CS a specific sub-operation is targeting. Let's propagate this information. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200505101353.1776394-2-boris.brezillon@collabora.com
2020-05-11mtd: rawnand: Add a NAND_NO_BBM_QUIRK flagBoris Brezillon1-0/+8
Some controllers with embedded ECC engines override the BBM marker with data or ECC bytes, thus making bad block detection through bad block marker impossible. Let's flag those chips so the core knows it shouldn't check the BBM and consider all blocks good. This should allow us to get rid of two implementers of the legacy.block_bad() hook. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200511064917.6255-1-boris.brezillon@collabora.com
2020-05-11mtd: rawnand: Expose monolithic read/write_page_raw() helpersMiquel Raynal1-2/+6
The current nand_read/write_page_raw() helpers are already widely used but do not fit the purpose of "constrained" controllers which cannot, for instance, separate command/address cycles with data cycles. Workaround this issue by proposing alternative helpers that can be used by these controller drivers instead. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://lore.kernel.org/linux-mtd/20200507105241.14299-12-miquel.raynal@bootlin.com
2020-05-11mtd: rawnand: Give the possibility to verify a read operation is supportedMiquel Raynal1-1/+1
This can be used to discriminate between two path in the parameter page detection: use data_in cycles (like before) if supported, use the CHANGE READ COLUMN command otherwise. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://lore.kernel.org/linux-mtd/20200507105241.14299-9-miquel.raynal@bootlin.com
2020-05-11mtd: rawnand: Rename a NAND chip optionMiquel Raynal1-1/+1
NAND controller drivers can set the NAND_USE_BOUNCE_BUFFER flag to a chip 'option' field. With this flag, the core is responsible of providing DMA-able buffers. The current behavior is to not force the use of a bounce buffer when the core thinks this is not needed. So in the end the name is a bit misleading, because in theory we will always have a DMA buffer but in practice it will not always be a bounce buffer. Rename this flag NAND_USES_DMA to be more accurate. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://lore.kernel.org/linux-mtd/20200507105241.14299-4-miquel.raynal@bootlin.com
2020-05-11mtd: rawnand: Reorder the nand_chip->options flagsMiquel Raynal1-27/+30
These flags are in a strange order, reorder the list, add spaces when it is relevant, pack definitions that are related. There is no functional change. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://lore.kernel.org/linux-mtd/20200507105241.14299-3-miquel.raynal@bootlin.com
2020-05-11mtd: rawnand: Translate obscure bitfields into readable macrosMiquel Raynal1-19/+19
Use the BIT() macro instead of defining a 8-digit value. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://lore.kernel.org/linux-mtd/20200507105241.14299-2-miquel.raynal@bootlin.com
2020-05-11mtd: rawnand: timings: Add mode information to the timings structureMiquel Raynal1-3/+7
Convert the timings union into a structure containing the mode and the actual values. The values are still a union in prevision of the addition of the NVDDR modes. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://lore.kernel.org/linux-mtd/20200428094302.14624-2-miquel.raynal@bootlin.com
2020-03-25mtd: rawnand: Add support for manufacturer specific suspend/resume operationMason Yang1-0/+4
Patch nand_suspend() & nand_resume() to let manufacturers overwrite suspend/resume operations. Signed-off-by: Mason Yang <masonccyang@mxic.com.tw> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/1584517348-14486-2-git-send-email-masonccyang@mxic.com.tw
2020-03-11mtd: rawnand: Add support for manufacturer specific lock/unlock operationMason Yang1-0/+5
Add nand_lock() & nand_unlock() for manufacturer specific lock & unlock operation while the device supports Block Portection function. Signed-off-by: Mason Yang <masonccyang@mxic.com.tw> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/1583220084-10890-2-git-send-email-masonccyang@mxic.com.tw
2020-03-11mtd: rawnand: Fix a typo ("manufecturer")Jonathan Neuschäfer1-1/+1
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200223180634.8736-1-j.neuschaefer@gmx.net
2019-07-14Merge tag 'mtd/for-5.3' of ↵Linus Torvalds1-0/+36
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull MTD updates from Miquel Raynal: "This contains the following changes for MTD: MTD core changes: - New Hyperbus framework - New _is_locked (concat) implementation - Various cleanups NAND core changes: - use longest matching pattern in ->exec_op() default parser - export NAND operation tracer - add flag to indicate panic_write in MTD - use kzalloc() instead of kmalloc() and memset() Raw NAND controller drivers changes: - brcmnand: - fix BCH ECC layout for large page NAND parts - fallback to detected ecc-strength, ecc-step-size - when oops in progress use pio and interrupt polling - code refactor code to introduce helper functions - add support for v7.3 controller - FSMC: - use nand_op_trace for operation tracing - GPMI: - move all driver code into single file - various cleanups (including dmaengine changes) - use runtime PM to manage clocks - implement exec_op - MTK: - correct low level time calculation of r/w cycle - improve data sampling timing for read cycle - add validity check for CE# pin setting - fix wrongly assigned OOB buffer pointer issue - re-license MTK NAND driver as Dual MIT/GPL - STM32: - manage the get_irq error case - increase DMA completion timeouts Raw NAND chips drivers changes: - Macronix: add read-retry support Onenand driver changes: - add support for 8Gb datasize chips - avoid fall-through warnings SPI-NAND changes: - define macros for page-read ops with three-byte addresses - add support for two-byte device IDs and then for GigaDevice GD5F1GQ4UFxxG - add initial support for Paragon PN26G0xA - handle the case where the last page read has bitflips SPI-NOR core changes: - add support for the mt25ql02g and w25q16jv flashes - print error in case of jedec read id fails - is25lp256: add post BFPT fix to correct the addr_width SPI NOR controller drivers changes: - intel-spi: Add support for Intel Elkhart Lake SPI serial flash - smt32: remove the driver as the driver was replaced by spi-stm32-qspi.c - cadence-quadspi: add reset control" * tag 'mtd/for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (60 commits) mtd: concat: implement _is_locked mtd operation mtd: concat: refactor concat_lock/concat_unlock mtd: abi: do not use C++ style comments in uapi header mtd: afs: remove unneeded NULL check mtd: rawnand: stm32_fmc2: increase DMA completion timeouts mtd: rawnand: Use kzalloc() instead of kmalloc() and memset() mtd: hyperbus: Add driver for TI's HyperBus memory controller mtd: spinand: read returns badly if the last page has bitflips mtd: spinand: Add initial support for Paragon PN26G0xA mtd: rawnand: mtk: Re-license MTK NAND driver as Dual MIT/GPL mtd: rawnand: gpmi: remove double assignment to block_size dt-bindings: mtd: brcmnand: Add brcmnand, brcmnand-v7.3 support mtd: rawnand: brcmnand: Add support for v7.3 controller mtd: rawnand: brcmnand: Refactored code to introduce helper functions mtd: rawnand: brcmnand: When oops in progress use pio and interrupt polling mtd: Add flag to indicate panic_write mtd: rawnand: Add Macronix NAND read retry support mtd: onenand: Avoid fall-through warnings mtd: spinand: Add support for GigaDevice GD5F1GQ4UFxxG mtd: spinand: Add support for two-byte device IDs ...
2019-06-27mtd: rawnand: export NAND operation tracerSascha Hauer1-0/+36
The NAND core has a NAND operation tracing function, but it can only be used by drivers using the generic option parser from the NAND core. Export the tracing function as a static inline function in rawnand.h so that drivers implementing exec_op directly do not have to write their own operation tracing. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner1-4/+1
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-18mtd: nand: Make flags for bad block marker position more granularFrieder Schrempf1-0/+1
To be able to check and set bad block markers in the first and second page of a block independently of each other, we create separate flags for both cases. Previously NAND_BBM_SECONDPAGE meant, that both, the first and the second page were used. With this patch NAND_BBM_FIRSTPAGE stands for using the first page and NAND_BBM_SECONDPAGE for using the second page. This patch is only for preparation of subsequent changes and does not implement the logic to actually handle both flags separately. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Boris Brezillon <bbrezillon@kernel.org> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-04-18mtd: rawnand: Always store info about bad block markers in chip structFrieder Schrempf1-1/+15
The information about where the manufacturer puts the bad block markers inside the bad block and in the OOB data is stored in different places. Let's move this information to nand_chip.options and nand_chip.badblockpos. As this chip-specific information is not directly related to the bad block table (BBT), we also rename the flags to NAND_BBM_*. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-04-18mtd: rawnand: constify elements of NAND_OP_PARSER(_PATTERN)Masahiro Yamada1-2/+2
Currently, drivers are able to constify a nand_op_parser array, but not nand_op_parser_pattern and nand_op_parser_pattern_elem since they are instantiated by using the NAND_OP_PARSER(_PATTERN). Add 'const' to them in order to move more driver data from .data to .rodata section. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-04-18mtd: rawnand: Fix sphinx syntaxJonathan Neuschäfer1-2/+2
Sphinx doesn't handle expressions in identifier references. This fixes the following warnings: ./include/linux/mtd/rawnand.h:1184: WARNING: Inline strong start-string without end-string. ./include/linux/mtd/rawnand.h:1186: WARNING: Inline strong start-string without end-string. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-04-08mtd: rawnand: Get rid of chip->ecc_{strength,step}_dsBoris Brezillon1-8/+0
nand_device embeds a nand_ecc_req object which contains the minimum strength and step-size required by the NAND device. Drop the chip->ecc_{strength,step}_ds fields and use chip->base.eccreq.{strength,step_size} instead. Signed-off-by: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2019-04-08mtd: rawnand: Get rid of chip->numchipsBoris Brezillon1-4/+3
The same information is provided by nanddev_ntargets(). Signed-off-by: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2019-04-08mtd: rawnand: Get rid of chip->chipsizeBoris Brezillon1-2/+0
The target size can now be returned by nanddev_get_targetsize(). Get rid of the chip->chipsize field and use this helper instead. Signed-off-by: Boris Brezillon <bbrezillon@kernel.org> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-04-08mtd: rawnand: Get rid of chip->bits_per_cellBoris Brezillon1-4/+2
Now that we inherit from nand_device, we can use nand_device->memorg.bits_per_cell instead of having our own field at the nand_chip level. Signed-off-by: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2019-04-08mtd: rawnand: Use nanddev_mtd_max_bad_blocks()Boris Brezillon1-5/+0
nanddev_mtd_max_bad_blocks() is implemented by the generic NAND layer and is already doing what we need. Reuse this function instead of having our own implementation. While at it, get rid of the ->max_bb_per_die and ->blocks_per_die fields which are now unused. Signed-off-by: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2019-04-08mtd: rawnand: Move all page cache related fields to a sub-structBoris Brezillon1-7/+11
Looking at the field names it's hard to tell what ->data_buf, ->pagebuf and ->pagebuf_bitflips are for. Clarify that by moving those fields in a sub-struct named pagecache. Signed-off-by: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2019-04-08mtd: rawnand: Provide a helper to get chip->data_bufBoris Brezillon1-0/+21
We plan to move cache related fields to a pagecache struct in nand_chip but some drivers access ->pagebuf directly to invalidate the cache before they start using ->data_buf. Let's provide an helper that returns a pointer to ->data_buf after invalidating the cache. Signed-off-by: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2019-04-08mtd: rawnand: Prepare things to reuse the generic NAND layerBoris Brezillon1-4/+6
The generic NAND layer provides abstraction of NAND devices no matter the bus that is used to communicate with the chip. Basing the raw NAND core on this generic layer should avoid duplication of common operations, like iterating over all pages/blocks for MTD IO/erase operations. In order to re-use this layer, we must first inherit from nand_device and then initialize the nand_device struct appropriately. This patch is taking care of the former. Signed-off-by: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2019-04-08mtd: rawnand: Use nand_to_mtd() in nand_{set,get}_flash_node()Boris Brezillon1-11/+11
Use the nand_to_mtd() helper to access chip->mtd as done everywhere else. Signed-off-by: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2019-02-05mtd: rawnand: remove ->legacy.erase and single_erase()Masahiro Yamada1-2/+0
Now that the last user of this hook, denali.c, stopped using it, we can remove the erase hook from nand_legacy. I squashed single_erase() because only the difference between single_erase() and nand_erase_op() is the number of bit shifts. The status/ret conversion in nand_erase_nand() is unneeded since commit eb94555e9e97 ("mtd: nand: use usual return values for the ->erase() hook"). Cleaned it up now. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-02-05mtd: rawnand: Simplify the lockingBoris Brezillon1-15/+9
nand_get_device() was complex for apparently no good reason. Let's replace this locking scheme with 2 mutexes: one attached to the controller and another one attached to the chip. Every time the core calls nand_get_device(), it will first lock the chip and if the chip is not suspended, will then lock the controller. nand_release_device() will release both lock in the reverse order. nand_get_device() can sleep, just like the previous implementation, which means you should never call that from an atomic context. We also get rid of - the chip->state field, since all it was used for was flagging the chip as suspended. We replace it by a field called chip->suspended and directly set it from nand_suspend/resume() - the controller->wq and controller->active fields which are no longer needed since the new controller->lock (now a mutex) guarantees that all operations are serialized at the controller level - panic_nand_get_device() which would anyway be a no-op. Talking about panic write, I keep thinking the rawnand implementation is unsafe because there's not negotiation with the controller to know when it's actually done with it's previous operation. I don't intend to fix that here, but that's probably something we should look at, or maybe we should consider dropping the ->_panic_write() implementation Last important change to mention: we now return -EBUSY when someone tries to access a device that as been suspended, and propagate this error to the upper layer. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-12-07mtd: rawnand: Deprecate the dummy_controller fieldBoris Brezillon1-3/+3
We try to force NAND controller drivers to properly separate the NAND controller object from the NAND chip one, so let's deprecate the dummy controller object embedded in nand_chip to encourage them to create their own instance. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-12-07mtd: rawnand: Move ->setup_data_interface() to nand_controller_opsBoris Brezillon1-6/+14
->setup_data_interface() is a controller specific method and should thus be placed in nand_controller_ops. In order to make that work with controllers that support keeping pre-configured timings we need to add a new NAND_KEEP_TIMINGS flag to inform the core it should skip the timings selection step. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Tested-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-12-07mtd: rawnand: Move the ->exec_op() method to nand_controller_opsBoris Brezillon1-50/+49
->exec_op() is a controller method and has nothing to do in the nand_chip struct. Let's move it to the nand_controller_ops struct and adjust the core and drivers accordingly. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Tested-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-12-07mtd: rawnand: Deprecate the ->select_chip() hookBoris Brezillon1-2/+2
Now that the CS line to be selected is passed to ->exec_op() and stored in chip->cur_cs and after patching all drivers implementing ->exec_op() to stop implementing this method, we can deprecate it by moving it to the nand_legacy structure. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Tested-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-12-07mtd: rawnand: Pass the CS line to be selected in struct nand_operationBoris Brezillon1-1/+10
In order to deprecate the ->select_chip hook we need to pass the CS line a NAND operations are targeting. This is done through the addition of a cs field to the nand_operation struct. We also need to keep track of the currently selected target to properly initialize op->cs, hence the ->cur_cs field addition to the nand_chip struct. Note that op->cs is not assigned in nand_exec_op() because we might rework the way we execute NAND operations in the future (adopt a queuing mechanism instead of the serialization we have right now). Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Tested-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-08 05:10:39 +0300