summaryrefslogtreecommitdiff
path: root/include/linux/mlx5
AgeCommit message (Collapse)AuthorFilesLines
2022-11-03net/mlx5: Fix possible use-after-free in async command interfaceTariq Toukan1-1/+1
[ Upstream commit bacd22df95147ed673bec4692ab2d4d585935241 ] mlx5_cmd_cleanup_async_ctx should return only after all its callback handlers were completed. Before this patch, the below race between mlx5_cmd_cleanup_async_ctx and mlx5_cmd_exec_cb_handler was possible and lead to a use-after-free: 1. mlx5_cmd_cleanup_async_ctx is called while num_inflight is 2 (i.e. elevated by 1, a single inflight callback). 2. mlx5_cmd_cleanup_async_ctx decreases num_inflight to 1. 3. mlx5_cmd_exec_cb_handler is called, decreases num_inflight to 0 and is about to call wake_up(). 4. mlx5_cmd_cleanup_async_ctx calls wait_event, which returns immediately as the condition (num_inflight == 0) holds. 5. mlx5_cmd_cleanup_async_ctx returns. 6. The caller of mlx5_cmd_cleanup_async_ctx frees the mlx5_async_ctx object. 7. mlx5_cmd_exec_cb_handler goes on and calls wake_up() on the freed object. Fix it by syncing using a completion object. Mark it completed when num_inflight reaches 0. Trace: BUG: KASAN: use-after-free in do_raw_spin_lock+0x23d/0x270 Read of size 4 at addr ffff888139cd12f4 by task swapper/5/0 CPU: 5 PID: 0 Comm: swapper/5 Not tainted 6.0.0-rc3_for_upstream_debug_2022_08_30_13_10 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: <IRQ> dump_stack_lvl+0x57/0x7d print_report.cold+0x2d5/0x684 ? do_raw_spin_lock+0x23d/0x270 kasan_report+0xb1/0x1a0 ? do_raw_spin_lock+0x23d/0x270 do_raw_spin_lock+0x23d/0x270 ? rwlock_bug.part.0+0x90/0x90 ? __delete_object+0xb8/0x100 ? lock_downgrade+0x6e0/0x6e0 _raw_spin_lock_irqsave+0x43/0x60 ? __wake_up_common_lock+0xb9/0x140 __wake_up_common_lock+0xb9/0x140 ? __wake_up_common+0x650/0x650 ? destroy_tis_callback+0x53/0x70 [mlx5_core] ? kasan_set_track+0x21/0x30 ? destroy_tis_callback+0x53/0x70 [mlx5_core] ? kfree+0x1ba/0x520 ? do_raw_spin_unlock+0x54/0x220 mlx5_cmd_exec_cb_handler+0x136/0x1a0 [mlx5_core] ? mlx5_cmd_cleanup_async_ctx+0x220/0x220 [mlx5_core] ? mlx5_cmd_cleanup_async_ctx+0x220/0x220 [mlx5_core] mlx5_cmd_comp_handler+0x65a/0x12b0 [mlx5_core] ? dump_command+0xcc0/0xcc0 [mlx5_core] ? lockdep_hardirqs_on_prepare+0x400/0x400 ? cmd_comp_notifier+0x7e/0xb0 [mlx5_core] cmd_comp_notifier+0x7e/0xb0 [mlx5_core] atomic_notifier_call_chain+0xd7/0x1d0 mlx5_eq_async_int+0x3ce/0xa20 [mlx5_core] atomic_notifier_call_chain+0xd7/0x1d0 ? irq_release+0x140/0x140 [mlx5_core] irq_int_handler+0x19/0x30 [mlx5_core] __handle_irq_event_percpu+0x1f2/0x620 handle_irq_event+0xb2/0x1d0 handle_edge_irq+0x21e/0xb00 __common_interrupt+0x79/0x1a0 common_interrupt+0x78/0xa0 </IRQ> <TASK> asm_common_interrupt+0x22/0x40 RIP: 0010:default_idle+0x42/0x60 Code: c1 83 e0 07 48 c1 e9 03 83 c0 03 0f b6 14 11 38 d0 7c 04 84 d2 75 14 8b 05 eb 47 22 02 85 c0 7e 07 0f 00 2d e0 9f 48 00 fb f4 <c3> 48 c7 c7 80 08 7f 85 e8 d1 d3 3e fe eb de 66 66 2e 0f 1f 84 00 RSP: 0018:ffff888100dbfdf0 EFLAGS: 00000242 RAX: 0000000000000001 RBX: ffffffff84ecbd48 RCX: 1ffffffff0afe110 RDX: 0000000000000004 RSI: 0000000000000000 RDI: ffffffff835cc9bc RBP: 0000000000000005 R08: 0000000000000001 R09: ffff88881dec4ac3 R10: ffffed1103bd8958 R11: 0000017d0ca571c9 R12: 0000000000000005 R13: ffffffff84f024e0 R14: 0000000000000000 R15: dffffc0000000000 ? default_idle_call+0xcc/0x450 default_idle_call+0xec/0x450 do_idle+0x394/0x450 ? arch_cpu_idle_exit+0x40/0x40 ? do_idle+0x17/0x450 cpu_startup_entry+0x19/0x20 start_secondary+0x221/0x2b0 ? set_cpu_sibling_map+0x2070/0x2070 secondary_startup_64_no_verify+0xcd/0xdb </TASK> Allocated by task 49502: kasan_save_stack+0x1e/0x40 __kasan_kmalloc+0x81/0xa0 kvmalloc_node+0x48/0xe0 mlx5e_bulk_async_init+0x35/0x110 [mlx5_core] mlx5e_tls_priv_tx_list_cleanup+0x84/0x3e0 [mlx5_core] mlx5e_ktls_cleanup_tx+0x38f/0x760 [mlx5_core] mlx5e_cleanup_nic_tx+0xa7/0x100 [mlx5_core] mlx5e_detach_netdev+0x1ca/0x2b0 [mlx5_core] mlx5e_suspend+0xdb/0x140 [mlx5_core] mlx5e_remove+0x89/0x190 [mlx5_core] auxiliary_bus_remove+0x52/0x70 device_release_driver_internal+0x40f/0x650 driver_detach+0xc1/0x180 bus_remove_driver+0x125/0x2f0 auxiliary_driver_unregister+0x16/0x50 mlx5e_cleanup+0x26/0x30 [mlx5_core] cleanup+0xc/0x4e [mlx5_core] __x64_sys_delete_module+0x2b5/0x450 do_syscall_64+0x3d/0x90 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Freed by task 49502: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 kasan_set_free_info+0x20/0x30 ____kasan_slab_free+0x11d/0x1b0 kfree+0x1ba/0x520 mlx5e_tls_priv_tx_list_cleanup+0x2e7/0x3e0 [mlx5_core] mlx5e_ktls_cleanup_tx+0x38f/0x760 [mlx5_core] mlx5e_cleanup_nic_tx+0xa7/0x100 [mlx5_core] mlx5e_detach_netdev+0x1ca/0x2b0 [mlx5_core] mlx5e_suspend+0xdb/0x140 [mlx5_core] mlx5e_remove+0x89/0x190 [mlx5_core] auxiliary_bus_remove+0x52/0x70 device_release_driver_internal+0x40f/0x650 driver_detach+0xc1/0x180 bus_remove_driver+0x125/0x2f0 auxiliary_driver_unregister+0x16/0x50 mlx5e_cleanup+0x26/0x30 [mlx5_core] cleanup+0xc/0x4e [mlx5_core] __x64_sys_delete_module+0x2b5/0x450 do_syscall_64+0x3d/0x90 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Fixes: e355477ed9e4 ("net/mlx5: Make mlx5_cmd_exec_cb() a safe API") Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20221026135153.154807-8-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-03-16net/mlx5: Fix size field in bufferx_reg structMohammad Kabat1-2/+2
[ Upstream commit ac77998b7ac3044f0509b097da9637184598980d ] According to HW spec the field "size" should be 16 bits in bufferx register. Fixes: e281682bf294 ("net/mlx5_core: HW data structs/types definitions cleanup") Signed-off-by: Mohammad Kabat <mohammadkab@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-10-20net/mlx5e: Mutually exclude RX-FCS and RX-port-timestampAya Levin1-2/+8
commit 0bc73ad46a76ed6ece4dcacb28858e7b38561e1c upstream. Due to current HW arch limitations, RX-FCS (scattering FCS frame field to software) and RX-port-timestamp (improved timestamp accuracy on the receive side) can't work together. RX-port-timestamp is not controlled by the user and it is enabled by default when supported by the HW/FW. This patch sets RX-port-timestamp opposite to RX-FCS configuration. Fixes: 102722fc6832 ("net/mlx5e: Add support for RXFCS feature flag") Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-23net/mlx5e: Fix page reclaim for dead peer hairpinDima Chumak1-0/+1
[ Upstream commit a3e5fd9314dfc4314a9567cde96e1aef83a7458a ] When adding a hairpin flow, a firmware-side send queue is created for the peer net device, which claims some host memory pages for its internal ring buffer. If the peer net device is removed/unbound before the hairpin flow is deleted, then the send queue is not destroyed which leads to a stack trace on pci device remove: [ 748.005230] mlx5_core 0000:08:00.2: wait_func:1094:(pid 12985): MANAGE_PAGES(0x108) timeout. Will cause a leak of a command resource [ 748.005231] mlx5_core 0000:08:00.2: reclaim_pages:514:(pid 12985): failed reclaiming pages: err -110 [ 748.001835] mlx5_core 0000:08:00.2: mlx5_reclaim_root_pages:653:(pid 12985): failed reclaiming pages (-110) for func id 0x0 [ 748.002171] ------------[ cut here ]------------ [ 748.001177] FW pages counter is 4 after reclaiming all pages [ 748.001186] WARNING: CPU: 1 PID: 12985 at drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c:685 mlx5_reclaim_startup_pages+0x34b/0x460 [mlx5_core] [ +0.002771] Modules linked in: cls_flower mlx5_ib mlx5_core ptp pps_core act_mirred sch_ingress openvswitch nsh xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 br_netfilter rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi rdma_cm ib_umad ib_ipoib iw_cm ib_cm ib_uverbs ib_core overlay fuse [last unloaded: pps_core] [ 748.007225] CPU: 1 PID: 12985 Comm: tee Not tainted 5.12.0+ #1 [ 748.001376] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 748.002315] RIP: 0010:mlx5_reclaim_startup_pages+0x34b/0x460 [mlx5_core] [ 748.001679] Code: 28 00 00 00 0f 85 22 01 00 00 48 81 c4 b0 00 00 00 31 c0 5b 5d 41 5c 41 5d 41 5e 41 5f c3 48 c7 c7 40 cc 19 a1 e8 9f 71 0e e2 <0f> 0b e9 30 ff ff ff 48 c7 c7 a0 cc 19 a1 e8 8c 71 0e e2 0f 0b e9 [ 748.003781] RSP: 0018:ffff88815220faf8 EFLAGS: 00010286 [ 748.001149] RAX: 0000000000000000 RBX: ffff8881b4900280 RCX: 0000000000000000 [ 748.001445] RDX: 0000000000000027 RSI: 0000000000000004 RDI: ffffed102a441f51 [ 748.001614] RBP: 00000000000032b9 R08: 0000000000000001 R09: ffffed1054a15ee8 [ 748.001446] R10: ffff8882a50af73b R11: ffffed1054a15ee7 R12: fffffbfff07c1e30 [ 748.001447] R13: dffffc0000000000 R14: ffff8881b492cba8 R15: 0000000000000000 [ 748.001429] FS: 00007f58bd08b580(0000) GS:ffff8882a5080000(0000) knlGS:0000000000000000 [ 748.001695] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 748.001309] CR2: 000055a026351740 CR3: 00000001d3b48006 CR4: 0000000000370ea0 [ 748.001506] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 748.001483] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 748.001654] Call Trace: [ 748.000576] ? mlx5_satisfy_startup_pages+0x290/0x290 [mlx5_core] [ 748.001416] ? mlx5_cmd_teardown_hca+0xa2/0xd0 [mlx5_core] [ 748.001354] ? mlx5_cmd_init_hca+0x280/0x280 [mlx5_core] [ 748.001203] mlx5_function_teardown+0x30/0x60 [mlx5_core] [ 748.001275] mlx5_uninit_one+0xa7/0xc0 [mlx5_core] [ 748.001200] remove_one+0x5f/0xc0 [mlx5_core] [ 748.001075] pci_device_remove+0x9f/0x1d0 [ 748.000833] device_release_driver_internal+0x1e0/0x490 [ 748.001207] unbind_store+0x19f/0x200 [ 748.000942] ? sysfs_file_ops+0x170/0x170 [ 748.001000] kernfs_fop_write_iter+0x2bc/0x450 [ 748.000970] new_sync_write+0x373/0x610 [ 748.001124] ? new_sync_read+0x600/0x600 [ 748.001057] ? lock_acquire+0x4d6/0x700 [ 748.000908] ? lockdep_hardirqs_on_prepare+0x400/0x400 [ 748.001126] ? fd_install+0x1c9/0x4d0 [ 748.000951] vfs_write+0x4d0/0x800 [ 748.000804] ksys_write+0xf9/0x1d0 [ 748.000868] ? __x64_sys_read+0xb0/0xb0 [ 748.000811] ? filp_open+0x50/0x50 [ 748.000919] ? syscall_enter_from_user_mode+0x1d/0x50 [ 748.001223] do_syscall_64+0x3f/0x80 [ 748.000892] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 748.001026] RIP: 0033:0x7f58bcfb22f7 [ 748.000944] Code: 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24 [ 748.003925] RSP: 002b:00007fffd7f2aaa8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 748.001732] RAX: ffffffffffffffda RBX: 000000000000000d RCX: 00007f58bcfb22f7 [ 748.001426] RDX: 000000000000000d RSI: 00007fffd7f2abc0 RDI: 0000000000000003 [ 748.001746] RBP: 00007fffd7f2abc0 R08: 0000000000000000 R09: 0000000000000001 [ 748.001631] R10: 00000000000001b6 R11: 0000000000000246 R12: 000000000000000d [ 748.001537] R13: 00005597ac2c24a0 R14: 000000000000000d R15: 00007f58bd084700 [ 748.001564] irq event stamp: 0 [ 748.000787] hardirqs last enabled at (0): [<0000000000000000>] 0x0 [ 748.001399] hardirqs last disabled at (0): [<ffffffff813132cf>] copy_process+0x146f/0x5eb0 [ 748.001854] softirqs last enabled at (0): [<ffffffff8131330e>] copy_process+0x14ae/0x5eb0 [ 748.013431] softirqs last disabled at (0): [<0000000000000000>] 0x0 [ 748.001492] ---[ end trace a6fabd773d1c51ae ]--- Fix by destroying the send queue of a hairpin peer net device that is being removed/unbound, which returns the allocated ring buffer pages to the host. Fixes: 4d8fcf216c90 ("net/mlx5e: Avoid unbounded peer devices when unpairing TC hairpin rules") Signed-off-by: Dima Chumak <dchumak@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-04-14net/mlx5: Fix PBMC register mappingAya Levin1-1/+1
[ Upstream commit 534b1204ca4694db1093b15cf3e79a99fcb6a6da ] Add reserved mapping to cover all the register in order to avoid setting arbitrary values to newer FW which implements the reserved fields. Fixes: 50b4a3c23646 ("net/mlx5: PPTB and PBMC register firmware command support") Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-04-14net/mlx5: Fix placement of log_max_flow_counterRaed Salem1-3/+3
[ Upstream commit a14587dfc5ad2312dabdd42a610d80ecd0dc8bea ] The cited commit wrongly placed log_max_flow_counter field of mlx5_ifc_flow_table_prop_layout_bits, align it to the HW spec intended placement. Fixes: 16f1c5bb3ed7 ("net/mlx5: Check device capability for maximum flow counters") Signed-off-by: Raed Salem <raeds@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-08net/mlx5: DR, Proper handling of unsupported Connect-X6DX SW steeringYevgeny Kliteynik1-1/+8
[ Upstream commit d421e466c2373095f165ddd25cbabd6c5b077928 ] STEs format for Connect-X5 and Connect-X6DX different. Currently, on Connext-X6DX the SW steering would break at some point when building STEs w/o giving a proper error message. Fix this by checking the STE format of the current device when initializing domain: add mlx5_ifc definitions for Connect-X6DX SW steering, read FW capability to get the current format version, and check this version when domain is being created. Fixes: 26d688e33f88 ("net/mlx5: DR, Add Steering entry (STE) utilities") Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-22net/mlx5: Fix a race when moving command interface to events modeEran Ben Elisha1-0/+6
commit d43b7007dbd1195a5b6b83213e49b1516aaf6f5e upstream. After driver creates (via FW command) an EQ for commands, the driver will be informed on new commands completion by EQE. However, due to a race in driver's internal command mode metadata update, some new commands will still be miss-handled by driver as if we are in polling mode. Such commands can get two non forced completion, leading to already freed command entry access. CREATE_EQ command, that maps EQ to the command queue must be posted to the command queue while it is empty and no other command should be posted. Add SW mechanism that once the CREATE_EQ command is about to be executed, all other commands will return error without being sent to the FW. Allow sending other commands only after successfully changing the driver's internal command mode metadata. We can safely return error to all other commands while creating the command EQ, as all other commands might be sent from the user/application during driver load. Application can rerun them later after driver's load was finished. Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Cc: Timo Rothenpieler <timo@rothenpieler.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-14net/mlx5: Avoid possible free of command entry while timeout comp handlerEran Ben Elisha1-0/+2
[ Upstream commit 50b2412b7e7862c5af0cbf4b10d93bc5c712d021 ] Upon command completion timeout, driver simulates a forced command completion. In a rare case where real interrupt for that command arrives simultaneously, it might release the command entry while the forced handler might still access it. Fix that by adding an entry refcount, to track current amount of allowed handlers. Command entry to be released only when this refcount is decremented to zero. Command refcount is always initialized to one. For callback commands, command completion handler is the symmetric flow to decrement it. For non-callback commands, it is wait_func(). Before ringing the doorbell, increment the refcount for the real completion handler. Once the real completion handler is called, it will decrement it. For callback commands, once the delayed work is scheduled, increment the refcount. Upon callback command completion handler, we will try to cancel the timeout callback. In case of success, we need to decrement the callback refcount as it will never run. In addition, gather the entry index free and the entry free into a one flow for all command types release. Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-05net/mlx5e: Modify uplink state on interface up/downRon Diskin1-0/+1
[ Upstream commit 7d0314b11cdd92bca8b89684c06953bf114605fc ] When setting the PF interface up/down, notify the firmware to update uplink state via MODIFY_VPORT_STATE, when E-Switch is enabled. This behavior will prevent sending traffic out on uplink port when PF is down, such as sending traffic from a VF interface which is still up. Currently when calling mlx5e_open/close(), the driver only sends PAOS command to notify the firmware to set the physical port state to up/down, however, it is not sufficient. When VF is in "auto" state, it follows the uplink state, which was not updated on mlx5e_open/close() before this patch. When switchdev mode is enabled and uplink representor is first enabled, set the uplink port state value back to its FW default "AUTO". Fixes: 63bfd399de55 ("net/mlx5e: Send PAOS command on interface up/down") Signed-off-by: Ron Diskin <rondi@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-03net/mlx5: Add command entry handling completionMoshe Shemesh1-0/+1
[ Upstream commit 17d00e839d3b592da9659c1977d45f85b77f986a ] When FW response to commands is very slow and all command entries in use are waiting for completion we can have a race where commands can get timeout before they get out of the queue and handled. Timeout completion on uninitialized command will cause releasing command's buffers before accessing it for initialization and then we will get NULL pointer exception while trying access it. It may also cause releasing buffers of another command since we may have timeout completion before even allocating entry index for this command. Add entry handling completion to avoid this race. Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-13IB/mlx5: Replace tunnel mpls capability bits for tunnel_offloadsAlex Vesker1-1/+5
commit 41e684ef3f37ce6e5eac3fb5b9c7c1853f4b0447 upstream. Until now the flex parser capability was used in ib_query_device() to indicate tunnel_offloads_caps support for mpls_over_gre/mpls_over_udp. Newer devices and firmware will have configurations with the flexparser but without mpls support. Testing for the flex parser capability was a mistake, the tunnel_stateless capability was intended for detecting mpls and was introduced at the same time as the flex parser capability. Otherwise userspace will be incorrectly informed that a future device supports MPLS when it does not. Link: https://lore.kernel.org/r/20200305123841.196086-1-leon@kernel.org Cc: <stable@vger.kernel.org> # 4.17 Fixes: e818e255a58d ("IB/mlx5: Expose MPLS related tunneling offloads") Signed-off-by: Alex Vesker <valex@mellanox.com> Reviewed-by: Ariel Levkovich <lariel@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-11net/mlx5: Deprecate usage of generic TLS HW capability bitTariq Toukan1-3/+4
[ Upstream commit 61c00cca41aeeaa8e5263c2f81f28534bc1efafb ] Deprecate the generic TLS cap bit, use the new TX-specific TLS cap bit instead. Fixes: a12ff35e0fb7 ("net/mlx5: Introduce TLS TX offload hardware bits and structures") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-30net/mlx5: Fix flow counter list auto bits structRoi Dayan1-2/+1
The union should contain the extended dest and counter list. Remove the resevered 0x40 bits which is redundant. This change doesn't break any functionally. Everything works today because the code in fs_cmd.c is using the correct structs if extended dest or the basic dest. Fixes: 1b115498598f ("net/mlx5: Introduce extended destination fields") Signed-off-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-09-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds1-14/+14
Pull networking fixes from David Miller: 1) Sanity check URB networking device parameters to avoid divide by zero, from Oliver Neukum. 2) Disable global multicast filter in NCSI, otherwise LLDP and IPV6 don't work properly. Longer term this needs a better fix tho. From Vijay Khemka. 3) Small fixes to selftests (use ping when ping6 is not present, etc.) from David Ahern. 4) Bring back rt_uses_gateway member of struct rtable, it's semantics were not well understood and trying to remove it broke things. From David Ahern. 5) Move usbnet snaity checking, ignore endpoints with invalid wMaxPacketSize. From Bjørn Mork. 6) Missing Kconfig deps for sja1105 driver, from Mao Wenan. 7) Various small fixes to the mlx5 DR steering code, from Alaa Hleihel, Alex Vesker, and Yevgeny Kliteynik 8) Missing CAP_NET_RAW checks in various places, from Ori Nimron. 9) Fix crash when removing sch_cbs entry while offloading is enabled, from Vinicius Costa Gomes. 10) Signedness bug fixes, generally in looking at the result given by of_get_phy_mode() and friends. From Dan Crapenter. 11) Disable preemption around BPF_PROG_RUN() calls, from Eric Dumazet. 12) Don't create VRF ipv6 rules if ipv6 is disabled, from David Ahern. 13) Fix quantization code in tcp_bbr, from Kevin Yang. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (127 commits) net: tap: clean up an indentation issue nfp: abm: fix memory leak in nfp_abm_u32_knode_replace tcp: better handle TCP_USER_TIMEOUT in SYN_SENT state sk_buff: drop all skb extensions on free and skb scrubbing tcp_bbr: fix quantization code to not raise cwnd if not probing bandwidth mlxsw: spectrum_flower: Fail in case user specifies multiple mirror actions Documentation: Clarify trap's description mlxsw: spectrum: Clear VLAN filters during port initialization net: ena: clean up indentation issue NFC: st95hf: clean up indentation issue net: phy: micrel: add Asym Pause workaround for KSZ9021 net: socionext: ave: Avoid using netdev_err() before calling register_netdev() ptp: correctly disable flags on old ioctls lib: dimlib: fix help text typos net: dsa: microchip: Always set regmap stride to 1 nfp: flower: fix memory leak in nfp_flower_spawn_vnic_reprs nfp: flower: prevent memory leak in nfp_flower_spawn_phy_reprs net/sched: Set default of CONFIG_NET_TC_SKB_EXT to N vrf: Do not attempt to create IPv6 mcast rule if IPv6 is disabled net: sched: sch_sfb: don't call qdisc_put() while holding tree lock ...
2019-09-24net/mlx5: DR, Fix SW steering HW bits and definitionsYevgeny Kliteynik1-14/+14
Fix wrong reserved bits offsets. Fixes: 97b5484ed608 ("net/mlx5: Add HW bits and definitions required for SW steering") Signed-off-by: Yevgeny Kliteynik <kliteyn@mellanox.com> Reviewed-by: Alex Vesker <valex@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-09-21Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds1-0/+9
Pull RDMA subsystem updates from Jason Gunthorpe: "This cycle mainly saw lots of bug fixes and clean up code across the core code and several drivers, few new functional changes were made. - Many cleanup and bug fixes for hns - Various small bug fixes and cleanups in hfi1, mlx5, usnic, qed, bnxt_re, efa - Share the query_port code between all the iWarp drivers - General rework and cleanup of the ODP MR umem code to fit better with the mmu notifier get/put scheme - Support rdma netlink in non init_net name spaces - mlx5 support for XRC devx and DC ODP" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (99 commits) RDMA: Fix double-free in srq creation error flow RDMA/efa: Fix incorrect error print IB/mlx5: Free mpi in mp_slave mode IB/mlx5: Use the original address for the page during free_pages RDMA/bnxt_re: Fix spelling mistake "missin_resp" -> "missing_resp" RDMA/hns: Package operations of rq inline buffer into separate functions RDMA/hns: Optimize cmd init and mode selection for hip08 IB/hfi1: Define variables as unsigned long to fix KASAN warning IB/{rdmavt, hfi1, qib}: Add a counter for credit waits IB/hfi1: Add traces for TID RDMA READ RDMA/siw: Relax from kmap_atomic() use in TX path IB/iser: Support up to 16MB data transfer in a single command RDMA/siw: Fix page address mapping in TX path RDMA: Fix goto target to release the allocated memory RDMA/usnic: Avoid overly large buffers on stack RDMA/odp: Add missing cast for 32 bit RDMA/hns: Use devm_platform_ioremap_resource() to simplify code Documentation/infiniband: update name of some functions RDMA/cma: Fix false error message RDMA/hns: Fix wrong assignment of qp_access_flags ...
2019-09-13Merge tag 'v5.3-rc8' into rdma.git for-nextJason Gunthorpe2-5/+4
To resolve dependencies in following patches mlx5_ib.h conflict resolved by keeing both hunks Linux 5.3-rc8 Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-09-06net/mlx5: Expose HW capability bits for port buffer per priority congestion ↵Aya Levin2-5/+25
counters Map capability bit indicating that HCA supports port buffer's congestion counters. Also map registers with the corresponding counters. Signed-off-by: Aya Levin <ayal@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-09-03net/mlx5: Add flow steering actions to fs_cmd shim layerMaor Gottlieb1-17/+16
Add flow steering actions: modify header and packet reformat to the fs_cmd shim layer. This allows each namespace to define possibly different functionality for alloc/dealloc action commands. Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-09-02Merge branch 'mlx5-next' of ↵Saeed Mahameed4-38/+226
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux Merge mlx5-next patches needed for upcoming mlx5 software steering. 1) Alex adds HW bits and definitions required for SW steering 2) Ariel moves device memory management to mlx5_core (From mlx5_ib) 3) Maor, Cleanups and fixups for eswitch mode and RoCE 4) Mark, Set only stag for match untagged packets Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-09-02net/mlx5: Add stub for mlx5_eswitch_modeMaor Gottlieb1-1/+7
Return MLX5_ESWITCH_NONE when CONFIG_MLX5_ESWITCH is not selected. Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-09-02net/mlx5: Add HW bits and definitions required for SW steeringAlex Vesker2-37/+205
Add the required Software Steering hardware definitions and bits to mlx5_ifc. Signed-off-by: Alex Vesker <valex@mellanox.com> Signed-off-by: Yevgeny Klitenik <kliten@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-09-02net/mlx5: Move device memory management to mlx5_coreAriel Levkovich1-0/+14
Move the device memory allocation and deallocation commands SW ICM memory to mlx5_core to expose this API for all mlx5_core users. This comes as preparation for supporting SW steering in kernel where it will be required to allocate and register device memory for direct rule insertion. In addition, an API to register this device memory for future remote access operations is introduced using the create_mkey commands. Signed-off-by: Ariel Levkovich <lariel@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-08-28Merge branch 'mlx5-next' of ↵Saeed Mahameed3-8/+22
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux mlx5 HW spec and bits updates: 1) Aya exposes IP-in-IP capability in mlx5_core. 2) Maxim exposes lag tx port affinity capabilities. 3) Moshe adds VNIC_ENV internal rq counter bits. 4) ODP capabilities for DC transport Misc updates: 5) Saeed, two compiler warnings cleanups 6) Add XRQ legacy commands opcodes 7) Use refcount_t for refcount 8) fix a -Wstringop-truncation warning
2019-08-28Merge branch 'mlx5-odp-dc' into rdma.git for-nextJason Gunthorpe1-1/+3
Michael Guralnik says: ==================== The series adds support for on-demand paging for DC transport. As DC is a mlx-only transport, the capabilities are exposed to the user using DEVX objects and later on through mlx5dv_query_device. ==================== Based on the mlx5-next branch from git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux for dependencies * branch 'mlx5-odp-dc': IB/mlx5: Add page fault handler for DC initiator WQE IB/mlx5: Remove check of FW capabilities in ODP page fault handling net/mlx5: Set ODP capabilities for DC transport to max
2019-08-28net/mlx5: Set ODP capabilities for DC transport to maxMichael Guralnik1-1/+3
In mlx5_core initialization, query max ODP capabilities for DC transport from FW and set as current capabilities. Signed-off-by: Michael Guralnik <michaelgur@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2019-08-26Merge remote-tracking branch 'mlx5-next/mlx5-next' into for-nextDoug Ledford2-4/+15
Bring in the lastest mlx5-next branch as the RDMA RX RoCE Steering Support patch series requires it (first two patches are in mlx5-next, final patch in RDMA tree). Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-08-22net/mlx5: Add HV VHCA infrastructureEran Ben Elisha1-0/+2
HV VHCA is a layer which provides PF to VF communication channel based on HyperV PCI config channel. It implements Mellanox's Inter VHCA control communication protocol. The protocol contains control block in order to pass messages between the PF and VF drivers, and data blocks in order to pass actual data. The infrastructure is agent based. Each agent will be responsible of contiguous buffer blocks in the VHCA config space. This infrastructure will bind agents to their blocks, and those agents can only access read/write the buffer blocks assigned to them. Each agent will provide three callbacks (control, invalidate, cleanup). Control will be invoked when block-0 is invalidated with a command that concerns this agent. Invalidate callback will be invoked if one of the blocks assigned to this agent was invalidated. Cleanup will be invoked before the agent is being freed in order to clean all of its open resources or deferred works. Block-0 serves as the control block. All execution commands from the PF will be written by the PF over this block. VF will ack on those by writing on block-0 as well. Its format is described by struct mlx5_hv_vhca_control_block layout. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-21Merge branch 'odp_fixes' into rdma.git for-nextJason Gunthorpe2-2/+5
Jason Gunthorpe says: ==================== This is a collection of general cleanups for ODP to clarify some of the flows around umem creation and use of the interval tree. ==================== The branch is based on v5.3-rc5 due to dependencies * odp_fixes: RDMA/mlx5: Use odp instead of mr->umem in pagefault_mr RDMA/mlx5: Use ib_umem_start instead of umem.address RDMA/core: Make invalidate_range a device operation RDMA/odp: Use kvcalloc for the dma_list and page_list RDMA/odp: Check for overflow when computing the umem_odp end RDMA/odp: Provide ib_umem_odp_release() to undo the allocs RDMA/odp: Split creating a umem_odp from ib_umem_get RDMA/odp: Make the three ways to create a umem_odp clear RMDA/odp: Consolidate umem_odp initialization RDMA/odp: Make it clearer when a umem is an implicit ODP umem RDMA/odp: Iterate over the whole rbtree directly RDMA/odp: Use the common interval tree library instead of generic RDMA/mlx5: Fix MR npages calculation for IB_ACCESS_HUGETLB Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-08-21net/mlx5: Create bypass and loopback flow steering namespaces for RDMA RXMark Zhang1-0/+1
Use different namespaces for bypass and switchdev loopback because they have different priorities and default table miss action requirement: 1. bypass: with multiple priorities support, and MLX5_FLOW_TABLE_MISS_ACTION_DEF as the default table miss action; 2. switchdev loopback: with single priority support, and MLX5_FLOW_TABLE_MISS_ACTION_SWITCH_DOMAIN as the default table miss action. Signed-off-by: Mark Zhang <markz@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2019-08-20net/mlx5: Add lag_tx_port_affinity capability bitMaxim Mikityanskiy1-1/+3
Add the lag_tx_port_affinity HCA capability bit that indicates that setting port affinity of TISes is supported. Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-08-20net/mlx5: Expose IP-in-IP capability bitAya Levin1-1/+3
Expose Fw indication that it supports Stateless Offloads for IP over IP tunneled packets. The following offloads are supported for the inner packets: RSS, RX & TX Checksum Offloads, LSO and Flow Steering. Signed-off-by: Aya Levin <ayal@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-08-20net/mlx5: Add support for VNIC_ENV internal rq counterMoshe Shemesh1-2/+8
Add mlx5 interface support for reading internal rq out of buffer counter as part of QUERY_VNIC_ENV command. The command is used by the driver to query vnic diagnostic statistics from FW. Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-08-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller2-5/+4
Merge conflict of mlx5 resolved using instructions in merge commit 9566e650bf7fdf58384bb06df634f7531ca3a97e. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-13IB/mlx5: Add legacy events to DEVX listYishai Hadas1-0/+9
Add two events that were defined in the device specification but were not exposed in the driver list. Post this patch those events can be read over the DEVX events interface once be reported by the firmware. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Reviewed-by: Edward Srouji <edwards@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Link: https://lore.kernel.org/r/20190808084358.29517-4-leon@kernel.org Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-08-13net/mlx5: Add XRQ legacy commands opcodesYishai Hadas1-0/+2
Add XRQ legacy commands opcodes, will be used via the DEVX interface. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2019-08-11mlx5: no need to check return value of debugfs_create functionsGreg Kroah-Hartman1-10/+2
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. This cleans up a lot of unneeded code and logic around the debugfs files, making all of this much simpler and easier to understand as we don't need to keep the dentries saved anymore. Cc: Saeed Mahameed <saeedm@mellanox.com> Cc: Leon Romanovsky <leon@kernel.org> Cc: netdev@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-10net/mlx5: E-switch, Removed unused hwidParav Pandit1-1/+0
Currently mlx5_eswitch_rep stores same hw ID for all representors. However it is never used from this structure. It is always used from mlx5_vport. Hence, remove unused field. Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Vu Pham <vuhuong@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-08-10net/mlx5e: Protect mod_hdr hash table with mutexVlad Buslov1-0/+1
To remove dependency on rtnl lock, protect mod_hdr hash table from concurrent modifications with new mutex. Implement helper function to get flow namespace to prevent code duplication. Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-08-10net/mlx5e: Extend mod header entry with reference counterVlad Buslov1-0/+4
List of flows attached to mod header entry is used as implicit reference counter (mod header entry is deallocated when list becomes free) and as a mechanism to obtain mod header entry that flow is attached to (through list head). This is not safe when concurrent modification of list of flows attached to mod header entry is possible. Proper atomic reference counter is required to support concurrent access. As a preparation for extending mod header with reference counting, extract code that lookups and deletes mod header entry into standalone put/get helpers. In order to remove this dependency on external locking, extend mod header entry with reference counter to manage its lifetime and extend flow structure with direct pointer to mod header entry that flow is attached to. To remove code duplication between legacy and switchdev mode implementations that both support mod_hdr functionality, store mod_hdr table in dedicated structure used by both fdb and kernel namespaces. New table structure is extended with table lock by one of the following patches in this series. Implement helper function to get correct mod_hdr table depending on flow namespace. Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Reviewed-by: Jianbo Liu <jianbol@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-08-08net/mlx5e: kTLS, Fix progress params context WQE layoutTariq Toukan1-3/+2
The TLS progress params context WQE should not include an Eth segment, drop it. In addition, align the tls_progress_params layout with the HW specification document: - fix the tisn field name. - remove the valid bit. Fixes: a12ff35e0fb7 ("net/mlx5: Introduce TLS TX offload hardware bits and structures") Fixes: d2ead1f360e8 ("net/mlx5e: Add kTLS TX HW offload support") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-08-08net/mlx5: kTLS, Fix wrong TIS opmod constantsTariq Toukan1-2/+2
Fix the used constants for TLS TIS opmods, per the HW specification. Fixes: a12ff35e0fb7 ("net/mlx5: Introduce TLS TX offload hardware bits and structures") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-08-07mlx5: Use refcount_t for refcountChuhong Yuan1-1/+2
Reference counters are preferred to use refcount_t instead of atomic_t. This is because the implementation of refcount_t can prevent overflows and detect possible use-after-free. So convert atomic_t ref counters to refcount_t. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Acked-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-08-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller2-2/+5
Just minor overlapping changes in the conflicts here. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-04net/mlx5: Fix mlx5_ifc_query_lag_out_bitsMark Zhang1-2/+0
Remove the "reserved_at_40" field to match the device specification. Fixes: 84df61ebc69b ("net/mlx5: Add HW interfaces used by LAG") Signed-off-by: Mark Zhang <markz@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2019-08-01net/mlx5: Add flow counter poolGavi Teitz1-0/+12
Add a pool of flow counters, based on flow counter bulks, removing the need to allocate a new counter via a costly FW command during the flow creation process. The time it takes to acquire/release a flow counter is cut from ~50 [us] to ~50 [ns]. The pool is part of the mlx5 driver instance, and provides flow counters for aging flows. mlx5_fc_create() was modified to provide counters for aging flows from the pool by default, and mlx5_destroy_fc() was modified to release counters back to the pool for later reuse. If bulk allocation is not supported or fails, and for non-aging flows, the fallback behavior is to allocate and free individual counters. The pool is comprised of three lists of flow counter bulks, one of fully used bulks, one of partially used bulks, and one of unused bulks. Counters are provided from the partially used bulks first, to help limit bulk fragmentation. The pool maintains a threshold, and strives to maintain the amount of available counters below it. The pool is increased in size when a counter acquisition request is made and there are no available counters, and it is decreased in size when the last counter in a bulk is released and there are more available counters than the threshold. All pool size changes are done in the context of the acquiring/releasing process. The value of the threshold is directly correlated to the amount of used counters the pool is providing, while constrained by a hard maximum, and is recalculated every time a bulk is allocated/freed. This ensures that the pool only consumes large amounts of memory for available counters if the pool is being used heavily. When fully populated and at the hard maximum, the buffer of available counters consumes ~40 [MB]. Signed-off-by: Gavi Teitz <gavi@mellanox.com> Reviewed-by: Vlad Buslov <vladbu@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-08-01net/mlx5: E-Switch, Verify support QoS element typeEli Cohen1-0/+7
Check if firmware supports the requested element type before attempting to create the element type. In addition, explicitly specify the request element type and tsar type. Signed-off-by: Eli Cohen <eli@mellanox.com> Reviewed-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-08-01net/mlx5: Fix offset of tisc bits reserved fieldSaeed Mahameed1-1/+1
First reserved field is off by one instead of reserved_at_1 it should be reserved_at_2, fix that. Fixes: a12ff35e0fb7 ("net/mlx5: Introduce TLS TX offload hardware bits and structures") Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-08-01net/mlx5: Add flow counter bulk allocation hardware bits and commandGavi Teitz1-2/+19
Add a handle to invoke the new FW capability of allocating a bulk of flow counters. Signed-off-by: Gavi Teitz <gavi@mellanox.com> Reviewed-by: Vlad Buslov <vladbu@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-03-12 23:36:18 +0300