summaryrefslogtreecommitdiff
path: root/include/linux/ieee80211.h
AgeCommit message (Collapse)AuthorFilesLines
2018-06-18ieee80211: bump IEEE80211_MAX_AMPDU_BUF to support HEJohannes Berg1-4/+6
Bump the IEEE80211_MAX_AMPDU_BUF size to 0x100 for HE support and - for now - use IEEE80211_MAX_AMPDU_BUF_HT everywhere. This is derived from my internal patch, parts of which Luca had sent upstream. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-06-15cfg80211: Add support for HELuca Coelho1-0/+427
Add support for the HE in cfg80211 and also add userspace API to nl80211 to send rate information out, conforming with P802.11ax_D2.0. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Ido Yariv <idox.yariv@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2018-02-22mac80211: add get TID helperSara Sharon1-0/+12
Extracting the TID from the QOS header is common enough to justify helper. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-02-19ieee80211: Increase PMK maximum length to 64 bytesSrinivas Dasari1-1/+1
Increase the PMK maximum length to 64 bytes to accommodate the key length used in DPP with the NIST P-521 and Brainpool 512 curves. Signed-off-by: Srinivas Dasari <dasaris@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-10-02ieee80211: Add WFA TPC report element OUI typeAvraham Stern1-0/+1
Add Transmit Power Control OUI type definition for WLAN_OUI_MICROSOFT. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-06-30ieee80211: update public action codesPeter Oh1-1/+34
Update Public Action field values as updated in IEEE Std 802.11-2016, so that modules/drivers can refer it. Signed-off-by: Peter Oh <peter.oh@bowerswilkins.com> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-13cfg80211: support 4-way handshake offloading for 802.1XAvraham Stern1-0/+3
Add API for setting the PMK to the driver. For FT support, allow setting also the PMK-R0 Name. This can be used by drivers that support 4-Way handshake offload while IEEE802.1X authentication is managed by upper layers. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> [arend.vanspriel@broadcom.com: add WANT_1X_4WAY_HS attribute] Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> [reword NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_1X docs a bit to say that the device may require it] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-06-13cfg80211: support 4-way handshake offloading for WPA/WPA2-PSKEliad Peller1-0/+1
Let drivers advertise support for station-mode 4-way handshake offloading with a new NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_PSK flag. Extend use of NL80211_ATTR_PMK attribute indicating it might be passed as part of NL80211_CMD_CONNECT command, and contain the PSK (which is the PMK, hence the name.) The driver/device is assumed to handle the 4-way handshake by itself in this case (including key derivations, etc.), instead of relying on the supplicant. This patch is somewhat based on this one (by Vladimir Kondratiev): https://patchwork.kernel.org/patch/1309561/. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> [arend.vanspriel@broadcom.com rebase dealing with existing ATTR_PMK] Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> [reword NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_PSK docs to indicate that this offload might be required] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-28mac80211: Add support for BSS max idle period elementAvraham Stern1-1/+27
Parse the BSS max idle period element and set the BSS configuration accordingly so the driver can use this information to configure the max idle period and to use protected management frames for keep alive when required. The BSS max idle period element is defined in IEEE802.11-2016, section 9.4.2.79 Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-27ieee80211: fix kernel-doc parsing errorsJohannes Berg1-6/+6
Some of the enum definitions are unnamed but there's still an attempt at documenting them - that doesn't work. Name them to make that work. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-27ieee80211: add FT-802.1X AKM suite selectorLuca Coelho1-0/+1
Add the definition for FT-8021.1X AKM selector as defined in IEEE Std 802.11-2016, table 9-133. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-27ieee80211: add SUITE_B AKM selectorsLuca Coelho1-12/+14
Add the definitions for SUITE_B and SUITE_B_192 AKM selectors as defined in IEEE802.11REVmc_D5.0, table 9-132. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-03-31cfg80211: Add support for FILS shared key authentication offloadVidyullatha Kanchanapally1-0/+13
Enhance nl80211 and cfg80211 connect request and response APIs to support FILS shared key authentication offload. The new nl80211 attributes can be used to provide additional information to the driver to establish a FILS connection. Also enhance the set/del PMKSA to allow support for adding and deleting PMKSA based on FILS cache identifier. Add a new feature flag that drivers can use to advertize support for FILS shared key authentication and association in station mode when using their own SME. Signed-off-by: Vidyullatha Kanchanapally <vkanchan@qti.qualcomm.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-03-06ieee80211: define HT operation CCFS2 fieldJohannes Berg1-0/+2
The Channel Center Frequency Segment 2 field is used in 802.11-2016 for encoding the actual channel position of the 80+80/160 MHz channel, if the max NSS is restricted. This is used for backwards compatibility. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-03-06ieee80211: rename CCFS1/CCFS2 to CCFS0/CCFS1Johannes Berg1-2/+2
This matches the spec, and otherwise things are really confusing with the next patch adding CCFS2. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-03-06ieee80211: add FT-PSK AKM suite selectorAvraham Stern1-0/+1
Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-02-08nl80211: add HT/VHT capabilities to AP parametersJohannes Berg1-1/+2
For the benefit of drivers that rebuild IEs in firmware, parse the IEs for HT/VHT capabilities and the respective membership selector in the (extended) supported rates. This avoids duplicating the same code into all drivers that need this information. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-01-26wireless: define cipher/AKM suites using a macroJohannes Berg1-22/+24
The spec writes cipher/AKM suites as something like 00-0F-AC:9, but the part after the colon isn't hex, it's decimal, so that we've already had a few mistakes (in other code, or unmerged patches) to e.g. write 0x000FAC10 instead of 0x000FAC0A. Use a macro to avoid that problem. Reviewed-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-01-05wireless: move IEEE80211_NUM_ACS to ieee80211.hJohannes Berg1-0/+2
This constant isn't really specific to mac80211, so move it "up" a level to ieee80211.h Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-10-27cfg80211: Add KEK/nonces for FILS association framesJouni Malinen1-0/+3
The new nl80211 attributes can be used to provide KEK and nonces to allow the driver to encrypt and decrypt FILS (Re)Association Request/Response frames in station mode. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-10-27cfg80211: Add Fast Initial Link Setup (FILS) auth algsJouni Malinen1-0/+3
This defines authentication algorithms for FILS (IEEE 802.11ai). Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-10-27cfg80211: Define IEEE P802.11ai (FILS) information elementsJouni Malinen1-0/+20
Define the Element IDs and Element ID Extensions from IEEE P802.11ai/D11.0. In addition, add a new cfg80211_find_ext_ie() wrapper to make it easier to find information elements that used the Element ID Extension field. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-06-30mac80211: Encrypt "Group addressed privacy" action framesMasashi Honma1-0/+30
Previously, the action frames to group address was not encrypted. But [1] "Table 8-38 Category values" indicates "Mesh" and "Multihop" category action frames should be encrypted (Group addressed privacy == yes). And the encyption key should be MGTK ([1] 10.13 Group addressed robust management frame procedures). So this patch modifies the code to make it suitable for spec. [1] IEEE Std 802.11-2012 Signed-off-by: Masashi Honma <masashi.honma@gmail.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2016-06-30wireless: Use macro instead of numberMasashi Honma1-1/+1
Use IEEE80211_MIN_ACTION_SIZE macro for robust management frame check. Signed-off-by: Masashi Honma <masashi.honma@gmail.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2016-04-06mac80211: add A-MSDU tx supportFelix Fietkau1-0/+3
Requires software tx queueing and fast-xmit support. For good performance, drivers need frag_list support as well. This avoids the need for copying data of aggregated frames. Running without it is only supported for debugging purposes. To avoid performance and packet size issues, the rate control module or driver needs to limit the maximum A-MSDU size by setting max_rc_amsdu_len in struct ieee80211_sta. Signed-off-by: Felix Fietkau <nbd@openwrt.org> [fix locking issue] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-06mac80211: add fast-rx pathJohannes Berg1-0/+10
The regular RX path has a lot of code, but with a few assumptions on the hardware it's possible to reduce the amount of code significantly. Currently the assumptions on the driver are the following: * hardware/driver reordering buffer (if supporting aggregation) * hardware/driver decryption & PN checking (if using encryption) * hardware/driver did de-duplication * hardware/driver did A-MSDU deaggregation * AP_LINK_PS is used (in AP mode) * no client powersave handling in mac80211 (in client mode) of which some are actually checked per packet: * de-duplication * PN checking * decryption and additionally packets must * not be A-MSDU (have been deaggregated by driver/device) * be data packets * not be fragmented * be unicast * have RFC 1042 header Additionally dynamically we assume: * no encryption or CCMP/GCMP, TKIP/WEP/other not allowed * station must be authorized * 4-addr format not enabled Some data needed for the RX path is cached in a new per-station "fast_rx" structure, so that we only need to look at this and the packet, no other memory when processing packets on the fast RX path. After doing the above per-packet checks, the data path collapses down to a pretty simple conversion function taking advantage of the data cached in the small fast_rx struct. This should speed up the RX processing, and will make it easier to reason about parallelizing RX (for which statistics will need to be per-CPU still.) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05ieee80211: support parsing Fine Timing Measurement action frameAvraham Stern1-0/+11
Add definition for Fine Timing Measurement (FTM) frame format as defined in IEEE802.11-REVmcD5.0 section 9.6.8.33 Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-02-24mac80211: limit the A-MSDU Tx based on peer's capabilitiesEmmanuel Grumbach1-0/+19
In VHT, the specification allows to limit the number of MSDUs in an A-MSDU in the Extended Capabilities IE. There is also a limitation on the byte size in the VHT IE. In HT, the only limitation is on the byte size. Parse the capabilities from the peer and make them available to the driver. In HT, there is another limitation when a BA agreement is active: the byte size can't be greater than 4095. This is not enforced here. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-01-14mac80211: process and save VHT MU-MIMO group frameSara Sharon1-0/+7
The Group ID Management frame is an Action frame of category VHT. It is transmitted by the AP to assign or change the user position of a STA for one or more group IDs. Process and save the group membership data. Notify underlying driver of changes. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-10-13wireless: add WNM action frame categoriesJohannes Berg1-0/+3
Add the WNM and unprotected WNM categories and mark the latter as not robust. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-10-13wireless: update robust action frame listJohannes Berg1-0/+2
Unprotected DMG and VHT action frames are not protected, reflect that in the list. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-10-09net/ieee80211: ieee80211_is_* can be booleanYaowei Bai1-38/+38
This patch makes ieee80211_is_* return bool to improve readability due to these particular functions only using either one or zero as their return value. No functional change. Signed-off-by: Yaowei Bai <bywxiaobai@163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-22wireless: mark element IDs 8 and 9 reservedJohannes Berg1-2/+1
These were never used in the tree, and are marked as reserved in the IEEE 802.11 documentation (ANA). Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-22mac80211: allow to transmit A-MSDU within A-MPDUEmmanuel Grumbach1-0/+1
Advertise the capability to send A-MSDU within A-MPDU in the AddBA request sent by mac80211. Let the driver know about the peer's capabilities. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-08-14mac80211: fix BIT position for TDLS WIDE extended capEmmanuel Grumbach1-1/+1
The bit was not according to ieee80211 specification. Fix that. Reviewed-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-27mac80111: Add BIP-CMAC-256 cipherJouni Malinen1-0/+9
This allows mac80211 to configure BIP-CMAC-256 to the driver and also use software-implementation within mac80211 when the driver does not support this with hardware accelaration. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-27cfg80211: Add new GCMP, CCMP-256, BIP-GMAC, BIP-CMAC-256 ciphersJouni Malinen1-0/+18
This makes cfg80211 aware of the GCMP, GCMP-256, CCMP-256, BIP-GMAC-128, BIP-GMAC-256, and BIP-CMAC-256 cipher suites. These new cipher suites were defined in IEEE Std 802.11ac-2013. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19mac80211: add parsing of TDLS specific IEsArik Nemtsov1-0/+15
These are used in TDLS channel switching code. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19cfg/mac80211: define TDLS channel switch feature bitArik Nemtsov1-0/+6
Define some related TDLS protocol constants and advertise channel switch support in the extended-capabilities IE when the feature bit is defined. Actually supporting TDLS channel-switching also requires support for some new nl80211 commands, to be introduced by future patches. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19mac80211: add BSS coex IE to TDLS setup framesArik Nemtsov1-0/+3
Add the BSS coex IE in case we support HT40 channels, as mandated by section 8.5.13 in IEEE802.11 2012. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19mac80211: retransmit TDLS teardown packet through AP if not ACKedLiad Kaufman1-0/+25
Since the TDLS peer station might not receive the teardown packet (e.g., when in PS), this makes sure the packet is retransmitted - this time through the AP - if the TDLS peer didn't ACK the packet. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-04ieee80211: add "max length of AMPDU" enum for VHTEran Harary1-1/+16
Maximum length of AMPDU that an STA can receive in VHT. length = 2 ^ (13 + max_ampdu_length_exp) - 1. Signed-off-by: Eran Harary <eran.harary@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-10-09mac80211: add extended channel switching capability if the driver supports CSALuciano Coelho1-0/+5
The Extended Channel Switching capability bit in the extended capabilities element must be set if the driver supports CSA on non-beaconing interfaces. Since this capability needs to be set during driver registration, the extended_capabiliities global variable needs to be moved to the local structure so that it can be modified. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-09-11cfg80211: add WMM traffic stream APIJohannes Berg1-0/+4
Add nl80211 and driver API to validate, add and delete traffic streams with appropriate settings. The API calls for userspace doing the action frame handshake with the peer, and then allows only to set up the parameters in the driver. To avoid setting up a session only to tear it down again, the validate API is provided, but the real usage later can still fail so userspace must be prepared for that. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-09-08mac80211: support DTPC IE (from Cisco Client eXtensions)Steinar H. Gunderson1-1/+2
Linux already supports 802.11h, where the access point can tell the client to reduce its transmission power. However, 802.11h is only defined for 5 GHz, where the need for this is much smaller than on 2.4 GHz. Cisco has their own solution, called DTPC (Dynamic Transmit Power Control). Cisco APs on a controller sometimes but not always send 802.11h; they always send DTPC, even on 2.4 GHz. This patch adds support for parsing and honoring the DTPC IE in addition to the 802.11h element (they do not always contain the same limits, so both must be honored); the format is not documented, but very simple. Tested (on top of wireless.git and on 3.16.1) against a Cisco Aironet 1142 joined to a Cisco 2504 WLC, by setting various transmit power levels for the given access points and observing the results. The Wireshark 802.11 dissector agrees with the interpretation of the element, except for negative numbers, which seem to never happen anyway. Signed-off-by: Steinar H. Gunderson <sgunderson@bigfoot.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2014-09-05cfg80211: add Intel Mobile Communications copyrightJohannes Berg1-0/+1
Our legal structure changed at some point (see wikipedia), but we forgot to immediately switch over to the new copyright notice. For files that we have modified in the time since the change, add the proper copyright notice now. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-08-26ieee80211: Support parsing TPC report element in action framesAndrei Otcheretianski1-0/+65
TPC report element is contained in spectrum management's tpc report action frames and in radio measurement's link measurement report action frames. Add a function which checks whether an action frame contains this element. This may be needed by the drivers in order to set the correct tx power value in these frames. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-07-21mac80211: add TDLS QoS param IE on setup-confirmArik Nemtsov1-0/+20
When TDLS QoS is supported by the the peer and the local card, add the WMM parameter IE to the setup-confirm frame. Take the QoS settings from the current AP, or if unsupported, use the default values from the specification. This behavior is mandated by IEEE802.11-2012 section 10.22.4. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Reviewed-by: Liad Kaufman <liad.kaufman@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-23mac80211: add API to request TDLS operation from userspaceArik Nemtsov1-0/+3
Write a mac80211 to the cfg80211 API for requesting a userspace TDLS operation. Define TDLS specific reason codes that can be used here. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-28wireless: add missing WLAN_EID_BSS_INTOLERANT_CHL_REPORTJes Sorensen1-0/+1
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-24 17:20:29 +0300