| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse updates from Miklos Szeredi:
- Fix lots of bugs, most from the late 6.x era, but some going back
to 2.6.x
- Add subsystems (io-uring, passthrough) and respective maintainers
(Bernd, Joanne and Amir)
- Separate transport and fs layers (Miklos)
- Don't block on cat /dev/fuse (Joanne)
- Perform some refactoring in fuse-uring (Joanne)
- Don't use bounce-buffer for READDIR reply in virtio-fs (Matthew Ochs)
- Clean up documentation (Randy)
- Improve tracing (Amir)
- Extend page cache invalidation after DIO (Cheng Ding)
- Invalidate readdir cache on epoch change (Jun Wu)
- Misc cleanups
* tag 'fuse-update-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: (81 commits)
fuse-uring: clear ent->fuse_req in commit_fetch error path
fuse-uring: use named constants for io-uring iovec indices
fuse-uring: refactor setting up copy state for payload copying
fuse-uring: use enum types for header copying
fuse-uring: refactor io-uring header copying from ring
fuse-uring: refactor io-uring header copying to ring
fuse-uring: separate next request fetching from sending logic
fuse: invalidate readdir cache on epoch bump
virtio-fs: avoid double-free on failed queue setup
fuse: invalidate page cache after DIO and async DIO writes
fuse: set ff->flock only on success
fuse: clean up interrupt reading
fuse: remove stray newline in fuse_dev_do_read()
fuse: use READ_ONCE in fuse_chan_num_background()
fuse: dax: Move long delayed work on system_dfl_long_wq
fuse: add fuse_request_sent tracepoint
fuse: Add SPDX ID lines to some files
fuse: use QSTR() instead of QSTR_INIT() in fuse_get_dentry
fuse: convert page array allocation to kcalloc()
fuse: use current creds for backing files
...
|
|
This fixe does page cache invalidation after DIO and async DIO writes for
both O_DIRECT and FOPEN_DIRECT_IO cases.
Commit b359af8275a9 ("fuse: Invalidate the page cache after FOPEN_DIRECT_IO
write") fixed xfstests generic/209 for DIO writes in the FOPEN_DIRECT_IO
path. DIO writes without FOPEN_DIRECT_IO are already handled by
generic_file_direct_write().
However, async DIO writes (xfstests generic/451) remain unhandled.
After this fix:
- Async write with FUSE_ASYNC_DIO:
invalidate in fuse_aio_invalidate_worker()
- Otherwise (Sync or async write without FUSE_ASYNC_DIO):
- With FOPEN_DIRECT_IO:
invalidate in fuse_direct_write_iter()
- Without FOPEN_DIRECT_IO:
invalidate in generic_file_direct_write()
Workqueue is required for async write invalidation to prevent deadlock:
calling it directly in the I/O end routine (which is in fuse worker thread
context) can block on a folio lock held by a buffered I/O thread waiting
for the same fuse worker thread.
Co-developed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Cheng Ding <cding@ddn.com>
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull dcache updates from Al Viro:
- d_alloc_parallel() API change (Neil's with my changes)
- NORCU fixes
- Reorganization and simplification of dentry eviction logic
- Simplifying rcu_read_lock() scopes in fs/dcache.c
- Secondary roots work - getting rid of NFS fake root dentries and
dealing with remaining shrink_dcache_for_umount() and
shrink_dentry_list() races
- making cursors NORCU (surprisingly easy)
* tag 'pull-dcache' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (22 commits)
make cursors NORCU
nfs: get rid of fake root dentries
wind ->s_roots via ->d_sib instead of ->d_hash
shrink_dentry_tree(): unify the calls of shrink_dentry_list()
shrinking rcu_read_lock() scope in d_alloc_parallel()
d_walk(): shrink rcu_read_lock() scope
document dentry_kill()
adjust calling conventions of lock_for_kill(), fold __dentry_kill() into dentry_kill()
Document rcu_read_lock() use in select_collect2()
Shift rcu_read_{,un}lock() inside fast_dput()
simplify safety for lock_for_kill() slowpath
fold lock_for_kill() and __dentry_kill() into common helper
fold lock_for_kill() into shrink_kill()
shrink_dentry_list(): start with removing from shrink list
d_prune_aliases(): make sure to skip NORCU aliases
kill d_dispose_if_unused()
make to_shrink_list() return whether it has moved dentry to list
select_collect(): ignore dentries on shrink lists if they have positive refcounts
find_acceptable_alias(): skip NORCU aliases with zero refcount
fix a race between d_find_any_alias() and final dput() of NORCU dentries
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull procfs updates from Christian Brauner:
- Revamp fs/filesystems.c
The file was a mess with a hand-rolled linked list in desperate need
of a cleanup. The filesystems list is now RCU-ified, /proc files can
be marked permanent from outside fs/proc/, and the string emitted
when reading /proc/filesystems is pre-generated and cached instead of
pointer-chasing and printfing entry by entry on every read.
The file is read frequently because libselinux reads it and is linked
into numerous frequently used programs (even ones you would not
suspect, like sed!). Scalability also improves since reference
maintenance on open/close is bypassed.
open+read+close cycle single-threaded (ops/s):
before: 442732
after: 1063462 (+140%)
open+read+close cycle with 20 processes (ops/s):
before: 606177
after: 3300576 (+444%)
A follow-up patch adds missing unlocks in some corner cases and
tidies things up.
- Relax the mount visibility check for subset=pid mounts
When procfs is mounted with subset=pid, all static files become
unavailable and only the dynamic pid information is accessible. In
that case there is no point in imposing the full mount visibility
restrictions on the mounter - everything that can be hidden in procfs
is already inaccessible. These restrictions prevented procfs from
being mounted inside rootless containers since almost all container
implementations overmount parts of procfs to hide certain
directories.
As part of this /proc/self/net is only shown in subset=pid mounts for
CAP_NET_ADMIN, reconfiguring subset=pid is rejected, the
SB_I_USERNS_VISIBLE superblock flag is replaced with an
FS_USERNS_MOUNT_RESTRICTED filesystem flag, fully visible mounts are
recorded in a list, and the mount restrictions are finally
documented.
- Protect ptrace_may_access() with exec_update_lock in procfs
Most uses of ptrace_may_access() in procfs should hold
exec_update_lock to avoid TOCTOU issues with concurrent privileged
execve() (like setuid binary execution).
This fixes the easy cases - the owner and visibility checks and the
FD link permission checks - with the gnarlier ones to follow later.
* tag 'vfs-7.2-rc1.procfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: fix ups and tidy ups to /proc/filesystems caching
proc: protect ptrace_may_access() with exec_update_lock (FD links)
proc: protect ptrace_may_access() with exec_update_lock (part 1)
docs: proc: add documentation about mount restrictions
proc: handle subset=pid separately in userns visibility checks
proc: prevent reconfiguring subset=pid
proc: subset=pid: Show /proc/self/net only for CAP_NET_ADMIN
fs: cache the string generated by reading /proc/filesystems
sysfs: remove trivial sysfs_get_tree() wrapper
fs: RCU-ify filesystems list
fs: move SB_I_USERNS_VISIBLE to FS_USERNS_MOUNT_RESTRICTED
proc: allow to mark /proc files permanent outside of fs/proc/
namespace: record fully visible mounts in list
|
|
shrink_dcache_for_umount() is supposed to handle the possibility of
some of the dentries to be evicted being in other threads shrink
lists; it either kills them, leaving an empty husk to be freed by
the owner of shrink list whenever it gets around to that, or it
waits for the eviction in progress to get completed.
That relies upon dentry remaining attached to the tree until the
eviction reaches dentry_unlist() and its ->d_sib gets removed
from the list. Unfortunately, the secondary roots are linked
via ->d_hash, rather than ->d_sib and they become removed from
that list before their inode references are dropped.
If shrink_dentry_list() from another thread ends up evicting
one of the secondary roots and gets to that point in dentry_kill()
when shrink_dcache_for_umount() is looking for secondary roots,
the latter will *not* notice anything, possibly leading to
warnings about busy inodes at umount time and all kinds of breakage
after that.
Moreover, shrink_dcache_for_umount() walks the list of secondary
roots with no protection whatsoever, so it might end up calling
dget() on a dentry that already passed through
lockref_mark_dead(&dentry->d_lockref);
ending up with corrupted refcount and possible UAF.
AFAICS, the most straightforward way to deal with that would be
to have secondary roots linked via ->d_sib rather than ->d_hash;
then they would remain on the list until killed, and we could
use d_add_waiter() machinery to wait for eviction in progress.
Changes:
* secondary roots look the same as ->s_root from d_unhashed()
and d_unlinked() POV now.
* secondary roots are represented as "no parent, but on ->d_sib"
instead of "no parent, but on ->d_hash".
* since ->d_sib is a plain hlist, we protect it with per-superblock
spinlock (sb->s_roots_lock) instead of the LSB of the head pointer (for
non-root dentries it would be protected by ->d_lock of parent).
* __d_obtain_alias() uses ->d_sib for linkage when allocating
a secondary root.
* d_splice_alias_ops() detects splicing of a secondary root and
removes it from the list before calling __d_move().
* dentry_unlist() detects eviction of a secondary root and
removes it from the list; no need to play the games for d_walk() sake,
since the latter is not going to look for the next sibling of those
anyway.
* ___d_drop() doesn't care about ->s_roots anymore.
* shrink_dcache_for_umount() uses proper locking for access to
the list of secondary roots and if it runs into one that is in the middle
of eviction waits for that to finish.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Tracking in-flight inode wb switches with a single global counter
(isw_nr_in_flight) plus a synchronize_rcu() based wait in
cgroup_writeback_umount() forces every umount to take a global hit
whenever any other superblock on the system has wb switches in flight,
even if the superblock being unmounted has none of its own.
Replace the global synchronize_rcu()/flush_workqueue() pair with a
per-sb counter, s_isw_nr_in_flight, plus three small helpers:
- cgroup_writeback_pin(sb) - increment counter
- cgroup_writeback_unpin(sb) - decrement and wake drainer if last
- cgroup_writeback_drain(sb) - wait for counter to reach zero
The wiring is:
- inode_prepare_wbs_switch() pins before checking SB_ACTIVE and
grabbing the inode; failure paths unpin before returning. A
lockless SB_ACTIVE check at the top of the function lets us skip
the atomic_inc/smp_mb dance once SB_ACTIVE has been cleared (it
is monotonic and never set back).
- process_inode_switch_wbs() unpins after the matching iput().
- cgroup_writeback_umount() drains the per-sb counter via
wait_var_event().
The smp_mb() pair between inode_prepare_wbs_switch() and
cgroup_writeback_umount() keeps the SB_ACTIVE / counter ordering:
either the umounter sees a non-zero counter and waits, or the
switcher sees SB_ACTIVE cleared and aborts before grabbing the
inode.
The global isw_nr_in_flight is left in place, since it is still used
to throttle in-flight switches via WB_FRN_MAX_IN_FLIGHT.
The rcu_read_lock() extension in inode_switch_wbs() and
cleanup_offline_cgwb() that the race fix added is no longer needed
and is reverted; the synchronize_rcu() that the race fix added to
cgroup_writeback_umount() is dropped as well.
The following numbers were measured on a 16 vCPU QEMU guest with 4
background superblocks each churning "create memcg -> write 1 MiB ->
rmdir memcg" to keep the global isw_nr_in_flight non-zero. Latencies
are wall-clock around umount(8); only the target sb's umount is
measured.
Target sb runs its own cgwb churn:
p50 p95 p99 max
global synchronize_rcu() 67.6 ms 88.3 ms 88.3 ms 96.8 ms
per-sb counter (this) 7.9 ms 10.0 ms 10.0 ms 10.1 ms
Idle target umount latency under cross-sb cgwb-switch pressure:
p50 p95 p99 max
global synchronize_rcu() 62.7 ms 95.4 ms 108.1 ms 108.6 ms
per-sb counter (this) 5.3 ms 6.9 ms 7.4 ms 7.4 ms
no-pressure baseline 4.9 ms 5.9 ms 6.3 ms 6.7 ms
8 concurrent umounts of idle sbs under the same pressure:
p50 p95 max
global synchronize_rcu() 61.3 ms 99.5 ms 113.7 ms
per-sb counter (this) 8.1 ms 9.1 ms 9.5 ms
In-kernel cgroup_writeback_umount() time across the same run
(bpftrace, ~340 calls covering all scenarios):
global synchronize_rcu() 12371 ms total (~36 ms / call)
per-sb counter (this) 1.37 ms total ( ~4 us / call)
Suggested-by: Christian Brauner <brauner@kernel.org>
Link: https://lore.kernel.org/r/177910456953.488929.2169908940676707307.b4-review@b4
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Baokun Li <libaokun@linux.alibaba.com>
Link: https://patch.msgid.link/20260521095016.2791354-4-libaokun@linux.alibaba.com
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
|
|
When procfs is mounted with subset=pid, only the dynamic process-related
part of the filesystem remains visible. That part cannot be hidden by
overmounts, so checking whether an existing procfs mount is fully
visible does not make sense for this mode.
At the same time, a subset=pid procfs mount must not be used as evidence
that a later procfs mount would not reveal additional information. It
provides a restricted view of procfs, not the full filesystem view.
Mark subset=pid procfs instances as restricted variants. Ignore
restricted variants when looking for an already-visible mount, and allow
new restricted variants without consulting mnt_already_visible().
Signed-off-by: Alexey Gladkov <legion@kernel.org>
Link: https://patch.msgid.link/4d5e760c3d534dd2e05578d119cc408450053a98.1777278334.git.legion@kernel.org
Reviewed-by: Aleksa Sarai <aleksa@amutable.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Whether a filesystem's mounts need to undergo a visibility check in user
namespaces is a static property of the filesystem type, not a runtime
property of each superblock instance. Both proc and sysfs always set
SB_I_USERNS_VISIBLE on their superblocks unconditionally (sysfs does so
on first creation, and subsequent mounts reuse the same superblock).
Move this flag from sb->s_iflags (SB_I_USERNS_VISIBLE) to
file_system_type->fs_flags (FS_USERNS_MOUNT_RESTRICTED) so the intent
is expressed at the filesystem type level where it belongs.
All check sites are updated to test sb->s_type->fs_flags instead of
sb->s_iflags. The SB_I_NOEXEC and SB_I_NODEV flags remain on the
superblock as they are runtime properties set during fill_super.
Link: https://patch.msgid.link/72887c5b6204dc3adf5a53104f0be6bd8bc4f6cd.1777278334.git.legion@kernel.org
Reviewed-by: Aleksa Sarai <aleksa@amutable.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add a SB_I_NO_DATA_INTEGRITY superblock flag for filesystems that cannot
guarantee data persistence on sync (eg fuse). For superblocks with this
flag set, sync kicks off writeback of dirty inodes but does not wait
for the flusher threads to complete the writeback.
This replaces the per-inode AS_NO_DATA_INTEGRITY mapping flag added in
commit f9a49aa302a0 ("fs/writeback: skip AS_NO_DATA_INTEGRITY mappings
in wait_sb_inodes()"). The flag belongs at the superblock level because
data integrity is a filesystem-wide property, not a per-inode one.
Having this flag at the superblock level also allows us to skip having
to iterate every dirty inode in wait_sb_inodes() only to skip each inode
individually.
Prior to this commit, mappings with no data integrity guarantees skipped
waiting on writeback completion but still waited on the flusher threads
to finish initiating the writeback. Waiting on the flusher threads is
unnecessary. This commit kicks off writeback but does not wait on the
flusher threads. This change properly addresses a recent report [1] for
a suspend-to-RAM hang seen on fuse-overlayfs that was caused by waiting
on the flusher threads to finish:
Workqueue: pm_fs_sync pm_fs_sync_work_fn
Call Trace:
<TASK>
__schedule+0x457/0x1720
schedule+0x27/0xd0
wb_wait_for_completion+0x97/0xe0
sync_inodes_sb+0xf8/0x2e0
__iterate_supers+0xdc/0x160
ksys_sync+0x43/0xb0
pm_fs_sync_work_fn+0x17/0xa0
process_one_work+0x193/0x350
worker_thread+0x1a1/0x310
kthread+0xfc/0x240
ret_from_fork+0x243/0x280
ret_from_fork_asm+0x1a/0x30
</TASK>
On fuse this is problematic because there are paths that may cause the
flusher thread to block (eg if systemd freezes the user session cgroups
first, which freezes the fuse daemon, before invoking the kernel
suspend. The kernel suspend triggers ->write_node() which on fuse issues
a synchronous setattr request, which cannot be processed since the
daemon is frozen. Or if the daemon is buggy and cannot properly complete
writeback, initiating writeback on a dirty folio already under writeback
leads to writeback_get_folio() -> folio_prepare_writeback() ->
unconditional wait on writeback to finish, which will cause a hang).
This commit restores fuse to its prior behavior before tmp folios were
removed, where sync was essentially a no-op.
[1] https://lore.kernel.org/linux-fsdevel/CAJnrk1a-asuvfrbKXbEwwDSctvemF+6zfhdnuzO65Pt8HsFSRw@mail.gmail.com/T/#m632c4648e9cafc4239299887109ebd880ac6c5c1
Fixes: 0c58a97f919c ("fuse: remove tmp folio for writebacks and internal rb tree")
Reported-by: John <therealgraysky@proton.me>
Cc: stable@vger.kernel.org
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Link: https://patch.msgid.link/20260320005145.2483161-2-joannelkoong@gmail.com
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: David Hildenbrand (Arm) <david@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs mount updates from Christian Brauner:
- statmount: accept fd as a parameter
Extend struct mnt_id_req with a file descriptor field and a new
STATMOUNT_BY_FD flag. When set, statmount() returns mount information
for the mount the fd resides on — including detached mounts
(unmounted via umount2(MNT_DETACH)).
For detached mounts the STATMOUNT_MNT_POINT and STATMOUNT_MNT_NS_ID
mask bits are cleared since neither is meaningful. The capability
check is skipped for STATMOUNT_BY_FD since holding an fd already
implies prior access to the mount and equivalent information is
available through fstatfs() and /proc/pid/mountinfo without
privilege. Includes comprehensive selftests covering both attached
and detached mount cases.
- fs: Remove internal old mount API code (1 patch)
Now that every in-tree filesystem has been converted to the new
mount API, remove all the legacy shim code in fs_context.c that
handled unconverted filesystems. This deletes ~280 lines including
legacy_init_fs_context(), the legacy_fs_context struct, and
associated wrappers. The mount(2) syscall path for userspace remains
untouched. Documentation references to the legacy callbacks are
cleaned up.
- mount: add OPEN_TREE_NAMESPACE to open_tree()
Container runtimes currently use CLONE_NEWNS to copy the caller's
entire mount namespace — only to then pivot_root() and recursively
unmount everything they just copied. With large mount tables and
thousands of parallel container launches this creates significant
contention on the namespace semaphore.
OPEN_TREE_NAMESPACE copies only the specified mount tree (like
OPEN_TREE_CLONE) but returns a mount namespace fd instead of a
detached mount fd. The new namespace contains the copied tree mounted
on top of a clone of the real rootfs.
This functions as a combined unshare(CLONE_NEWNS) + pivot_root() in a
single syscall. Works with user namespaces: an unshare(CLONE_NEWUSER)
followed by OPEN_TREE_NAMESPACE creates a mount namespace owned by
the new user namespace. Mount namespace file mounts are excluded from
the copy to prevent cycles. Includes ~1000 lines of selftests"
* tag 'vfs-7.0-rc1.namespace' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
selftests/open_tree: add OPEN_TREE_NAMESPACE tests
mount: add OPEN_TREE_NAMESPACE
fs: Remove internal old mount API code
selftests: statmount: tests for STATMOUNT_BY_FD
statmount: accept fd as a parameter
statmount: permission check should return EPERM
|
|
Create some wrapper code around struct super_block so that filesystems
have a standard way to queue filesystem metadata and file I/O error
reports to have them sent to fsnotify.
If a filesystem wants to provide an error number, it must supply only
negative error numbers. These are stored internally as negative
numbers, but they are converted to positive error numbers before being
passed to fanotify, per the fanotify(7) manpage. Implementations of
super_operations::report_error are passed the raw internal event data.
Note that we have to play some shenanigans with mempools and queue_work
so that the error handling doesn't happen outside of process context,
and the event handler functions (both ->report_error and fsnotify) can
handle file I/O error messages without having to worry about whatever
locks might be held. This asynchronicity requires that unmount wait for
pending events to clear.
Add a new callback to the superblock operations structure so that
filesystem drivers can themselves respond to file I/O errors if they so
desire. This will be used for an upcoming self-healing patchset for
XFS.
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Link: https://patch.msgid.link/176826402610.3490369.4378391061533403171.stgit@frogsfrogsfrogs
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Now that the last in-tree filesystem has been converted to the new mount
API, remove all legacy mount API code designed to handle un-converted
filesystems, and remove associated documentation as well.
(The code to handle the legacy mount(2) syscall from userspace is still
in place, of course.)
Tested with an allmodconfig build on x86_64, and a sanity check of an
old mount(2) syscall mount.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Link: https://patch.msgid.link/20251212174403.2882183-1-sandeen@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull superblock lock guard updates from Christian Brauner:
"This starts the work of introducing guards for superblock related
locks.
Introduce super_write_guard for scoped superblock write protection.
This provides a guard-based alternative to the manual sb_start_write()
and sb_end_write() pattern, allowing the compiler to automatically
handle the cleanup"
* tag 'vfs-6.19-rc1.guards' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
xfs: use super write guard in xfs_file_ioctl()
open: use super write guard in do_ftruncate()
btrfs: use super write guard in relocating_repair_kthread()
ext4: use super write guard in write_mmp_block()
btrfs: use super write guard in sb_start_write()
btrfs: use super write guard btrfs_run_defrag_inode()
btrfs: use super write guard in btrfs_reclaim_bgs_work()
fs: add super_write_guard
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull fs header updates from Christian Brauner:
"This contains initial work to start splitting up fs.h.
Begin the long-overdue work of splitting up the monolithic fs.h
header. The header has grown to over 3000 lines and includes types and
functions for many different subsystems, making it difficult to
navigate and causing excessive compilation dependencies.
This series introduces new focused headers for superblock-related
code:
- Rename fs_types.h to fs_dirent.h to better reflect its actual
content (directory entry types)
- Add fs/super_types.h containing superblock type definitions
- Add fs/super.h containing superblock function declarations
This is the first step in a longer effort to modularize the VFS
headers.
Cleanups:
- Inode Field Layout Optimization (Mateusz Guzik)
Move inode fields used during fast path lookup closer together to
improve cache locality during path resolution.
- current_umask() Optimization (Mateusz Guzik)
Inline current_umask() and move it to fs_struct.h. This improves
performance by avoiding function call overhead for this
frequently-used function, and places it in a more appropriate
header since it operates on fs_struct"
* tag 'vfs-6.19-rc1.fs_header' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: move inode fields used during fast path lookup closer together
fs: inline current_umask() and move it to fs_struct.h
fs: add fs/super.h header
fs: add fs/super_types.h header
fs: rename fs_types.h to fs_dirent.h
|
|
Link: https://patch.msgid.link/20251104-work-guards-v1-1-5108ac78a171@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Split out super block associated functions into a separate header.
Link: https://patch.msgid.link/20251104-work-fs-header-v1-3-fb39a2efe39e@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Split out super block associated structures into a separate header.
Link: https://patch.msgid.link/20251104-work-fs-header-v1-2-fb39a2efe39e@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
