| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"This is entirely SoC clk drivers.
The majority diff wise is for the new Rockchip and Qualcomm clk
drivers which is mostly lines and lines of data structures to describe
the clk hardware in these SoCs. Beyond those two, Renesas continues to
incrementally add clks to their SoC drivers, causing them to show up
higher in the diffstat this time because they added quite a few clks
all over the place.
Overall it is a semi-quiet release that has some new clk drivers and
the usual fixes for clock data that was wrong or missing and
non-critical cleanups that plug error paths or fix typos.
New Drivers:
- Qualcomm IPQ5424 Network Subsystem Clock Controller
- Qualcomm SM8750 Video Clock Controller
- Rockchip RV1126B and RK3506 clock drivers
- i.MX8ULP SIM LPAV clock driver
- Samsung ACPM (firmware interface) clock driver
- Altera Agilex5 clock driver"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (117 commits)
clk: keystone: fix compile testing
clk: keystone: syscon-clk: fix regmap leak on probe failure
clk: qcom: Mark camcc_sm7150_hws static
clk: samsung: exynos-clkout: Assign .num before accessing .hws
clk: rockchip: Add clock and reset driver for RK3506
dt-bindings: clock: rockchip: Add RK3506 clock and reset unit
clk: actions: Fix discarding const qualifier by 'container_of' macro
clk: spacemit: Set clk_hw_onecell_data::num before using flex array
clk: visconti: Add VIIF clocks
dt-bindings: clock: tmpv770x: Add VIIF clocks
dt-bindings: clock: tmpv770x: Remove definition of number of clocks
clk: visconti: Do not define number of clocks in bindings
clk: rockchip: Add clock controller for the RV1126B
dt-bindings: clock, reset: Add support for rv1126b
clk: rockchip: Implement rockchip_clk_register_armclk_multi_pll()
clk: qcom: x1e80100-dispcc: Add USB4 router link resets
dt-bindings: clock: qcom: x1e80100-dispcc: Add USB4 router link resets
clk: qcom: videocc-sm8750: Add video clock controller driver for SM8750
dt-bindings: clock: qcom: Add SM8750 video clock controller
clk: qcom: branch: Extend invert logic for branch2 mem clocks
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/IIO driver updates from Greg KH:
"Here is the big set of char/misc/iio driver updates for 6.19-rc1. Lots
of stuff in here including:
- lots of IIO driver updates, cleanups, and additions
- large interconnect driver changes as they get converted over to a
dynamic system of ids
- coresight driver updates
- mwave driver updates
- binder driver updates and changes
- comedi driver fixes now that the fuzzers are being set loose on
them
- nvmem driver updates
- new uio driver addition
- lots of other small char/misc driver updates, full details in the
shortlog
All of these have been in linux-next for a while now"
* tag 'char-misc-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (304 commits)
char: applicom: fix NULL pointer dereference in ac_ioctl
hangcheck-timer: fix coding style spacing
hangcheck-timer: Replace %Ld with %lld
hangcheck-timer: replace printk(KERN_CRIT) with pr_crit
uio: Add SVA support for PCI devices via uio_pci_generic_sva.c
dt-bindings: slimbus: fix warning from example
intel_th: Fix error handling in intel_th_output_open
misc: rp1: Fix an error handling path in rp1_probe()
char: xillybus: add WQ_UNBOUND to alloc_workqueue users
misc: bh1770glc: use pm_runtime_resume_and_get() in power_state_store
misc: cb710: Fix a NULL vs IS_ERR() check in probe()
mux: mmio: Add suspend and resume support
virt: acrn: split acrn_mmio_dev_res out of acrn_mmiodev
greybus: gb-beagleplay: Fix timeout handling in bootloader functions
greybus: add WQ_PERCPU to alloc_workqueue users
char/mwave: drop typedefs
char/mwave: drop printk wrapper
char/mwave: remove printk tracing
char/mwave: remove unneeded fops
char/mwave: remove MWAVE_FUTZ_WITH_OTHER_DEVICES ifdeffery
...
|
|
Pull SCSI updates from James Bottomley:
"Usual driver updates (ufs, lpfc, target, qla2xxx) plus assorted
cleanups and fixes including the WQ_PERCPU series.
The biggest core change is the new allocation of pseudo-devices which
allow the sending of internal commands to a given SCSI target"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (147 commits)
scsi: MAINTAINERS: Add the UFS include directory
scsi: scsi_debug: Support injecting unaligned write errors
scsi: qla2xxx: Fix improper freeing of purex item
scsi: ufs: rockchip: Fix compile error without CONFIG_GPIOLIB
scsi: ufs: rockchip: Reset controller on PRE_CHANGE of hce enable notify
scsi: ufs: core: Use scsi_device_busy()
scsi: ufs: core: Fix single doorbell mode support
scsi: pm80xx: Add WQ_PERCPU to alloc_workqueue() users
scsi: target: Add WQ_PERCPU to alloc_workqueue() users
scsi: qedi: Add WQ_PERCPU to alloc_workqueue() users
scsi: target: ibmvscsi: Add WQ_PERCPU to alloc_workqueue() users
scsi: qedf: Add WQ_PERCPU to alloc_workqueue() users
scsi: bnx2fc: Add WQ_PERCPU to alloc_workqueue() users
scsi: be2iscsi: Add WQ_PERCPU to alloc_workqueue() users
scsi: message: fusion: Add WQ_PERCPU to alloc_workqueue() users
scsi: lpfc: WQ_PERCPU added to alloc_workqueue() users
scsi: scsi_transport_fc: WQ_PERCPU added to alloc_workqueue users()
scsi: scsi_dh_alua: WQ_PERCPU added to alloc_workqueue() users
scsi: qla2xxx: WQ_PERCPU added to alloc_workqueue() users
scsi: target: sbp: Replace use of system_unbound_wq with system_dfl_wq
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"This is the first half of the driver changes:
- A treewide interface change to the "syscore" operations for power
management, as a preparation for future Tegra specific changes
- Reset controller updates with added drivers for LAN969x, eic770 and
RZ/G3S SoCs
- Protection of system controller registers on Renesas and Google
SoCs, to prevent trivially triggering a system crash from e.g.
debugfs access
- soc_device identification updates on Nvidia, Exynos and Mediatek
- debugfs support in the ST STM32 firewall driver
- Minor updates for SoC drivers on AMD/Xilinx, Renesas, Allwinner, TI
- Cleanups for memory controller support on Nvidia and Renesas"
* tag 'soc-drivers-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (114 commits)
memory: tegra186-emc: Fix missing put_bpmp
Documentation: reset: Remove reset_controller_add_lookup()
reset: fix BIT macro reference
reset: rzg2l-usbphy-ctrl: Fix a NULL vs IS_ERR() bug in probe
reset: th1520: Support reset controllers in more subsystems
reset: th1520: Prepare for supporting multiple controllers
dt-bindings: reset: thead,th1520-reset: Add controllers for more subsys
dt-bindings: reset: thead,th1520-reset: Remove non-VO-subsystem resets
reset: remove legacy reset lookup code
clk: davinci: psc: drop unused reset lookup
reset: rzg2l-usbphy-ctrl: Add support for RZ/G3S SoC
reset: rzg2l-usbphy-ctrl: Add support for USB PWRRDY
dt-bindings: reset: renesas,rzg2l-usbphy-ctrl: Document RZ/G3S support
reset: eswin: Add eic7700 reset driver
dt-bindings: reset: eswin: Documentation for eic7700 SoC
reset: sparx5: add LAN969x support
dt-bindings: reset: microchip: Add LAN969x support
soc: rockchip: grf: Add select correct PWM implementation on RK3368
soc/tegra: pmc: Add USB wake events for Tegra234
amba: tegra-ahb: Fix device leak on SMMU enable
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v6.19
Support for hardware-keymanager v1 support for wrapped keys is introduce
in the ICE driver.
Support for the new Kaanapali mobile platform is added to last-level
cache controller, pd-mapper, and UBWC drivers.
UBWC driver gains support for the Monaco and Glymur platforms.
The PMIC GLINK driver is extended to handle the differences found in
targets where the related firmware runs on the SoCCP.
Support for running on targets without initialized SMEM is provided, by
reworking the SMEM driver to differentiate between "not yet probed" and
"probed but there was no SMEM". An unwanted WARN_ON() that triggered if
clients asked for a SMEM item beyond the currently running system's
limit, was removed, to allow new use cases to gracefully fail on old
targets.
The Qualcomm socinfo driver is extended with support for version 20
through 23 and support for providing version information about more than
32 remote processors. Identifiers for QCS6490 and SM8850 are also added.
Additionally, a number of smaller bug fixes and cleanups in PBS, OCMEM,
GSBI, TZMEM, and MDT-loader are included.
* tag 'qcom-drivers-for-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (31 commits)
soc: qcom: mdt_loader: rename 'firmware' parameter of qcom_mdt_load()
soc: qcom: mdt_loader: merge __qcom_mdt_load() and qcom_mdt_load_no_init()
soc: qcom: socinfo: Add reserve field to support future extension
soc: qcom: socinfo: Add support for new fields in revision 20
dt-bindings: firmware: qcom,scm: Document SCM on Kaanapali SOC
soc: qcom: socinfo: add support to extract more than 32 image versions
soc: qcom: smem: drop the WARN_ON() on SMEM item validation
soc: qcom: ubwc: Add config for Kaanapali
soc: qcom: socinfo: Add SoC ID for QCS6490
dt-bindings: arm: qcom,ids: Add SoC ID for QCS6490
soc: qcom: ice: Add HWKM v1 support for wrapped keys
soc: qcom: smem: better track SMEM uninitialized state
err.h: add INIT_ERR_PTR() macro
soc: qcom: smem: fix hwspinlock resource leak in probe error paths
dt-bindings: soc: qcom,aoss-qmp: Document the Glymur AOSS side channel
dt-bindings: soc: qcom,aoss-qmp: Document the Kaanapali AOSS channel
soc: qcom: ubwc: Add QCS8300 UBWC cfg
dt-bindings: firmware: qcom,scm: Document Glymur scm
soc: qcom: socinfo: Add SM8850 SoC ID
dt-bindings: arm: qcom,ids: Add SoC ID for SM8850
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The architectures supported by this driver have a maximum of 32-bits
of address, so we don't need more than 32-bits to store the length of
control data. Change the length in struct cs_dsp_coeff_ctl to an
unsigned int instead of a size_t. Also make a corresponding trivial
change to wm_adsp.c to prevent a compiler warning.
Tested on x86_64 builds this saves at least 4 bytes per control
(another 4 bytes might be saved if the compiler was inserting padding
to align the size_t).
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20251124171536.78962-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Stephen Rothwell reports htmldocs warnings when merging char-misc tree:
WARNING: include/linux/firmware/intel/stratix10-svc-client.h:22 This comment
starts with '/**', but isn't a kernel-doc comment.
WARNING: include/linux/firmware/intel/stratix10-svc-client.h:184 Enum value
'COMMAND_HWMON_READTEMP' not described in enum 'stratix10_svc_command_code'
WARNING: include/linux/firmware/intel/stratix10-svc-client.h:184 Enum value
'COMMAND_HWMON_READVOLT' not described in enum 'stratix10_svc_command_code'
WARNING: include/linux/firmware/intel/stratix10-svc-client.h:307 function
parameter 'cb_arg' not described in 'async_callback_t'
Fixes: 4f49088c1625 ("firmware: stratix10-svc: Add definition for voltage and temperature sensor")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/linux-next/20251114153920.1c5df700@canb.auug.org.au/
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://patch.msgid.link/20251114185815.358423-3-dinguyen@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
cs_dsp_debugfs_wmfw_read() and cs_dsp_debugfs_bin_read() were identical
except for which struct member they printed. Move all this duplicated
code into a common function cs_dsp_debugfs_string_read().
The check for dsp->booted has been removed because this is redundant.
The two strings are set when the DSP is booted and cleared when the
DSP is powered-down.
Access to the string char * must be protected by the pwr_lock mutex. The
string is passed into cs_dsp_debugfs_string_read() as a pointer to the
char * so that the mutex lock can also be factored out into
cs_dsp_debugfs_string_read().
wmfw_file_name and bin_file_name members of struct cs_dsp have been
changed to const char *. It makes for a better API to pass a const
pointer into cs_dsp_debugfs_string_read().
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20251120130640.1169780-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use correct kernel-doc format to avoid kernel-doc warnings in
nclude/linux/firmware/cirrus/cs_dsp_test_utils.h:
- mark one struct member as private: since the comment says that it is
private
- add ending ':' to struct members where needed
Warning: include/linux/firmware/cirrus/cs_dsp_test_utils.h:30 struct
member 'saw_bus_write' not described in 'cs_dsp_test'
Warning: include/linux/firmware/cirrus/cs_dsp_test_utils.h:53 struct
member 'id' not described in 'cs_dsp_mock_alg_def'
Warning: ../include/linux/firmware/cirrus/cs_dsp_test_utils.h:53 struct
member 'ver' not described in 'cs_dsp_mock_alg_def'
Warning: ../include/linux/firmware/cirrus/cs_dsp_test_utils.h:53 struct
member 'xm_base_words' not described in 'cs_dsp_mock_alg_def'
Warning: ../include/linux/firmware/cirrus/cs_dsp_test_utils.h:53 struct
member 'xm_size_words' not described in 'cs_dsp_mock_alg_def'
Warning: ../include/linux/firmware/cirrus/cs_dsp_test_utils.h:53 struct
member 'ym_base_words' not described in 'cs_dsp_mock_alg_def'
Warning: ../include/linux/firmware/cirrus/cs_dsp_test_utils.h:53 struct
member 'ym_size_words' not described in 'cs_dsp_mock_alg_def'
Warning: ../include/linux/firmware/cirrus/cs_dsp_test_utils.h:53 struct
member 'zm_base_words' not described in 'cs_dsp_mock_alg_def'
Warning: ../include/linux/firmware/cirrus/cs_dsp_test_utils.h:53 struct
member 'zm_size_words' not described in 'cs_dsp_mock_alg_def'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20251104192653.929157-1-rdunlap@infradead.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Integrate Remote System Update(RSU) service commands into the
asynchronous framework for communicating with SDM. This allows the RSU
commands to be processed asynchronously, improving the responsiveness
of the Stratix10 service channel.
The asynchronous framework now supports the following RSU commands:
* COMMAND_RSU_GET_SPT_TABLE
* COMMAND_RSU_STATUS
* COMMAND_RSU_NOTIFY
Signed-off-by: Mahesh Rao <mahesh.rao@altera.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Introduce support for asynchronous communication with the Stratix10
service channel. Define new structures to enable asynchronous messaging
with the Secure Device Manager (SDM). Add and remove asynchronous
support for existing channels. Implement initialization and cleanup
routines for the asynchronous framework. Enable sending and polling of
messages to the SDM asynchronously.
The new public functions added are:
- stratix10_svc_add_async_client: Adds a client to the service channel.
- stratix10_svc_remove_async_client: Removes an asynchronous client from
the service channel.
- stratix10_svc_async_send: Sends an asynchronous message to the SDM
mailbox in EL3 secure firmware.
- stratix10_svc_async_poll: Polls the status of an asynchronous service
request in EL3 secure firmware.
- stratix10_svc_async_done: Marks an asynchronous transaction as
complete and frees up the resources.
These changes enhance the functionality of the Stratix10 service channel
by allowing for more efficient and flexible communication with the
firmware.
Signed-off-by: Mahesh Rao <mahesh.rao@altera.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Add entry in Stratix 10 Service Layer to support temperature and voltage
sensor.
Signed-off-by: Khairul Anuar Romli <khairul.anuar.romli@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
- Add APIs for UFS PHY initialization.
- Verify M-PHY TX-RX configuration readiness.
- Confirm SRAM initialization and Set SRAM bypass.
- Retrieve UFS calibration values.
Signed-off-by: Ajay Neeli <ajay.neeli@amd.com>
Acked-by: Senthil Nathan Thangaraj <senthilnathan.thangaraj@amd.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Acked-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251021113003.13650-4-ajay.neeli@amd.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add support for a generic ioctl read/write interface using which users
can request firmware to perform read/write operations on a protected and
secure address space.
The functionality is introduced through the means of two new IOCTL IDs
which extend the existing PM_IOCTL EEMI API:
- IOCTL_READ_REG
- IOCTL_MASK_WRITE_REG
The caller only passes the node id of the given device and an offset.
The base address is not exposed to the caller and internally retrieved
by the firmware. Firmware will enforce an access policy on the incoming
read/write request.
Signed-off-by: Izhar Ameer Shaikh <izhar.ameer.shaikh@amd.com>
Reviewed-by: Tanmay Shah <tanmay.shah@amd.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Signed-off-by: Ajay Neeli <ajay.neeli@amd.com>
Acked-by: Senthil Nathan Thangaraj <senthilnathan.thangaraj@amd.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Acked-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251021113003.13650-3-ajay.neeli@amd.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Provide empty method for devm_acpm_get_by_node() if we aren't
building in the CONFIG_EXYNOS_ACPM_PROTOCOL. This allows to
test-build the CONFIG_EXYNOS_ACPM_CLK code.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202510211905.RgfWkgss-lkp@intel.com/
Fixes: 40498a742053 ("clk: samsung: add Exynos ACPM clock driver")
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://patch.msgid.link/20251021-fix-acpm-clk-build-test-v1-1-236a3d6db7f5@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Add ACPM DVFS protocol handler. It constructs DVFS messages that
the APM firmware can understand.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Tested-by: Peter Griffin <peter.griffin@linaro.org> # on gs101-oriole
Link: https://patch.msgid.link/20251010-acpm-clk-v6-2-321ee8826fd4@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Fix kernel-doc warnings by using correct kernel-doc syntax and
formatting to prevent warnings:
Warning: include/linux/firmware/qcom/qcom_tzmem.h:25 Enum value
'QCOM_TZMEM_POLICY_STATIC' not described in enum 'qcom_tzmem_policy'
Warning: ../include/linux/firmware/qcom/qcom_tzmem.h:25 Enum value
'QCOM_TZMEM_POLICY_MULTIPLIER' not described in enum 'qcom_tzmem_policy'
Warning: ../include/linux/firmware/qcom/qcom_tzmem.h:25 Enum value
'QCOM_TZMEM_POLICY_ON_DEMAND' not described in enum 'qcom_tzmem_policy'
Fixes: 84f5a7b67b61 ("firmware: qcom: add a dedicated TrustZone buffer allocator")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20251017191323.1820167-1-rdunlap@infradead.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
soc/drivers
arm64: Xilinx SOC changes for 6.18
firmware:
- Add debugfs interface
- Wire versal-net compatible string
- Change SOC family detection
* tag 'zynqmp-soc-for-6.18' of https://github.com/Xilinx/linux-xlnx:
drivers: firmware: xilinx: Switch to new family code in zynqmp_pm_get_family_info()
drivers: firmware: xilinx: Add unique family code for all platforms
firmware: xilinx: Add Versal NET platform compatible string
firmware: xilinx: Add debugfs support for PM_GET_NODE_STATUS
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"Lots of platform specific updates for Qualcomm SoCs, including a new
TEE subsystem driver for the Qualcomm QTEE firmware interface.
Added support for the Apple A11 SoC in drivers that are shared with
the M1/M2 series, among more updates for those.
Smaller platform specific driver updates for Renesas, ASpeed,
Broadcom, Nvidia, Mediatek, Amlogic, TI, Allwinner, and Freescale
SoCs.
Driver updates in the cache controller, memory controller and reset
controller subsystems.
SCMI firmware updates to add more features and improve robustness.
This includes support for having multiple SCMI providers in a single
system.
TEE subsystem support for protected DMA-bufs, allowing hardware to
access memory areas that managed by the kernel but remain inaccessible
from the CPU in EL1/EL0"
* tag 'soc-drivers-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (139 commits)
soc/fsl/qbman: Use for_each_online_cpu() instead of for_each_cpu()
soc: fsl: qe: Drop legacy-of-mm-gpiochip.h header from GPIO driver
soc: fsl: qe: Change GPIO driver to a proper platform driver
tee: fix register_shm_helper()
pmdomain: apple: Add "apple,t8103-pmgr-pwrstate"
dt-bindings: spmi: Add Apple A11 and T2 compatible
serial: qcom-geni: Load UART qup Firmware from linux side
spi: geni-qcom: Load spi qup Firmware from linux side
i2c: qcom-geni: Load i2c qup Firmware from linux side
soc: qcom: geni-se: Add support to load QUP SE Firmware via Linux subsystem
soc: qcom: geni-se: Cleanup register defines and update copyright
dt-bindings: qcom: se-common: Add QUP Peripheral-specific properties for I2C, SPI, and SERIAL bus
Documentation: tee: Add Qualcomm TEE driver
tee: qcom: enable TEE_IOC_SHM_ALLOC ioctl
tee: qcom: add primordial object
tee: add Qualcomm TEE driver
tee: increase TEE_MAX_ARG_SIZE to 4096
tee: add TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF
tee: add TEE_IOCTL_PARAM_ATTR_TYPE_UBUF
tee: add close_context to TEE driver operation
...
|
|
Qualcomm TEE (QTEE) hosts Trusted Applications (TAs) and services in
the secure world, accessed via objects. A QTEE client can invoke these
objects to request services. Similarly, QTEE can request services from
the nonsecure world using objects exported to the secure world.
Add low-level primitives to facilitate the invocation of objects hosted
in QTEE, as well as those hosted in the nonsecure world.
If support for object invocation is available, the qcom_scm allocates
a dedicated child platform device. The driver for this device communicates
with QTEE using low-level primitives.
Tested-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Harshal Dev <quic_hdev@quicinc.com>
Signed-off-by: Amirreza Zarrabi <amirreza.zarrabi@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250911-qcom-tee-using-tee-ss-without-mem-obj-v12-2-17f07a942b8d@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Anyone with access to contiguous physical memory should be able to
share memory with QTEE using shm_bridge.
Tested-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Harshal Dev <quic_hdev@quicinc.com>
Reviewed-by: Kuldeep Singh <quic_kuldsing@quicinc.com>
Signed-off-by: Amirreza Zarrabi <amirreza.zarrabi@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250911-qcom-tee-using-tee-ss-without-mem-obj-v12-1-17f07a942b8d@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
To ensure successful builds when CONFIG_IMX_SCMI_CPU_DRV is not enabled,
this patch adds static inline stub implementations for the following
functions:
- scmi_imx_cpu_start()
- scmi_imx_cpu_started()
- scmi_imx_cpu_reset_vector_set()
These stubs return -EOPNOTSUPP to indicate that the functionality is not
supported in the current configuration. This avoids potential build or
link errors in code that conditionally calls these functions based on
feature availability.
Fixes: 1055faa5d660 ("firmware: imx: Add i.MX95 SCMI CPU driver")
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
To ensure successful builds when CONFIG_IMX_SCMI_LMM_DRV is not enabled,
this patch adds static inline stub implementations for the following
functions:
- scmi_imx_lmm_operation()
- scmi_imx_lmm_info()
- scmi_imx_lmm_reset_vector_set()
These stubs return -EOPNOTSUPP to indicate that the functionality is not
supported in the current configuration. This avoids potential build or
link errors in code that conditionally calls these functions based on
feature availability.
Fixes: 7242bbf418f0 ("firmware: imx: Add i.MX95 SCMI LMM driver")
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
To ensure successful builds when CONFIG_IMX_SCMI_MISC_DRV is not enabled,
this patch adds static inline stub implementations for the following
functions:
- scmi_imx_misc_ctrl_get()
- scmi_imx_misc_ctrl_set()
These stubs return -EOPNOTSUPP to indicate that the functionality is not
supported in the current configuration. This avoids potential build or
link errors in code that conditionally calls these functions based on
feature availability.
This patch also drops the changes in commit 540c830212ed ("firmware: imx:
remove duplicate scmi_imx_misc_ctrl_get()").
The original change aimed to simplify the handling of optional features by
removing conditional stubs. However, the use of conditional stubs is
necessary when CONFIG_IMX_SCMI_MISC_DRV is n, while consumer driver is
set to y.
This is not a matter of preserving legacy patterns, but rather to ensure
that there is no link error whether for module or built-in.
Fixes: 0b4f8a68b292 ("firmware: imx: Add i.MX95 MISC driver")
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
zynqmp_pm_get_family_info()
Currently, the family code and subfamily code are derived from the
PMC_TAP_IDCODE register. Versal, Versal NET share the same family
code. Also some platforms share the same subfamily code, making it
difficult to distinguish between platforms. Update
zynqmp_pm_get_family_info() to use IDs derived from the compatible
string instead of silicon ID codes derived from PMC_TAP_IDCODE register.
Signed-off-by: Jay Buddhabhatti <jay.buddhabhatti@amd.com>
Link: https://lore.kernel.org/r/20250701123851.1314531-4-jay.buddhabhatti@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
|
|
The family code is currently derived from the PMC_TAP_IDCODE register
value, but there are issues where Versal, Versal NET, and future
platforms share the same family code. Additionally for some platforms
have identical subfamily code, making it challenging to differentiate
between platforms based on the family and subfamily codes. To resolve
this, a new family code member is added to the platform data, initialized
with unique values. This change enables better platform distinction via
the compatible string.
Signed-off-by: Jay Buddhabhatti <jay.buddhabhatti@amd.com>
Link: https://lore.kernel.org/r/20250701123851.1314531-3-jay.buddhabhatti@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
|
|
Add new debug interface to support PM_GET_NODE_STATUS to get the node
information like requirements and usage.
The debugfs firmware driver interface is only meant for testing and
debugging EEMI APIs. Hence, it is by-default disabled in production
systems.
Signed-off-by: Madhav Bhatt <madhav.bhatt@amd.com>
Link: https://lore.kernel.org/r/20250417094543.3873507-1-madhav.bhatt@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain updates from Ulf Hansson:
"pmdomain core:
- Leave powered-on genpds on until ->sync_state() or late_initcall_sync
- Export a common ->sync_state() helper for genpd providers
- Add generic ->sync_state() support
- Add a bus/driver for genpd provider-devices
- Introduce dev_pm_genpd_is_on() for consumers
pmdomain providers:
- cpuidle-psci: Drop redundant ->sync_state() support
- cpuidle-riscv-sbi: Drop redundant ->sync_state() support
- imx: Set ISI panic write for imx8m-blk-ctrl
- qcom: Add support for Glymur and Milos RPMh power-domains
- qcom: Use of_genpd_sync_state() for power-domains
- rockchip: Add support for the RK3528 variant
- samsung: Fix splash-screen handover by enforcing a ->sync_state()
- sunxi: Add support for Allwinner A523's PCK600 power-controller
- tegra: Opt-out from genpd's common ->sync_state() support for pmc
- thead: Instantiate a GPU power sequencer via the auxiliary bus
- renesas: Move init to postcore_initcalls
- xilinx: Move ->sync_state() support to firmware driver
- xilinx: Use of_genpd_sync_state() for power-domains
pmdomain consumers:
- remoteproc: imx_rproc: Fixup the detect/attach procedure for
pre-booted cores"
* tag 'pmdomain-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (44 commits)
pmdomain: qcom: rpmhpd: Add Glymur RPMh Power Domains
dt-bindings: power: rpmpd: Add Glymur power domains
remoteproc: imx_rproc: detect and attach to pre-booted remote cores
remoteproc: imx_rproc: skip clock enable when M-core is managed by the SCU
pmdomain: core: introduce dev_pm_genpd_is_on()
pmdomain: ti: Select PM_GENERIC_DOMAINS
pmdomain: sunxi: sun20i-ppu: change to tristate and enable for ARCH_SUNXI
pmdomain: sunxi: add driver for Allwinner A523's PCK-600 power controller
pmdomain: sunxi: sun20i-ppu: add A523 support
pmdomain: samsung: Fix splash-screen handover by enforcing a sync_state
cpuidle: riscv-sbi: Drop redundant sync_state support
cpuidle: psci: Drop redundant sync_state support
pmdomain: core: Leave powered-on genpds on until sync_state
pmdomain: core: Leave powered-on genpds on until late_initcall_sync
pmdomain: core: Default to use of_genpd_sync_state() for genpd providers
driver core: Add dev_set_drv_sync_state()
pmdomain: core: Add common ->sync_state() support for genpd providers
driver core: Export get_dev_from_fwnode()
firmware: xilinx: Use of_genpd_sync_state()
firmware: xilinx: Don't share zynqmp_pm_init_finalize()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"Changes are all over the place, but very little sticks out as
noteworthy.
There is a new misc driver for the Raspberry Pi 5's RP1 multifunction
I/O chip, along with hooking it up to the pinctrl and clk frameworks.
The reset controller and memory subsystems have mainly small updates,
but there are two new reset drivers for the K230 and VC1800B SoCs, and
new memory driver support for Tegra264.
The ARM SMCCC and SCMI firmware drivers gain a few more features that
should help them be supported across more environments. Similarly, the
SoC specific firmware on Tegra and Qualcomm get minor enhancements and
chip support.
In the drivers/soc/ directory, the ASPEED LPC snoop driver gets an
overhaul for code robustness, the Tegra and Qualcomm and NXP drivers
grow to support more chips, while the Hisilicon, Mediatek and Renesas
drivers see mostly janitorial fixes"
* tag 'soc-drivers-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (100 commits)
bus: del unnecessary init var
soc: fsl: qe: convert set_multiple() to returning an integer
pinctrl: rp1: use new GPIO line value setter callbacks
soc: hisilicon: kunpeng_hccs: Fix incorrect log information
dt-bindings: soc: qcom: qcom,pmic-glink: document Milos compatible
dt-bindings: soc: qcom,aoss-qmp: document the Milos Always-On Subsystem side channel
dt-bindings: firmware: qcom,scm: document Milos SCM Firmware Interface
soc: qcom: socinfo: Add support to retrieve APPSBL build details
soc: qcom: pmic_glink: fix OF node leak
soc: qcom: spmi-pmic: add more PMIC SUBTYPE IDs
soc: qcom: socinfo: Add PM7550 & PMIV0108 PMICs
soc: qcom: socinfo: Add SoC IDs for SM7635 family
dt-bindings: arm: qcom,ids: Add SoC IDs for SM7635 family
firmware: qcom: scm: request the waitqueue irq *after* initializing SCM
firmware: qcom: scm: initialize tzmem before marking SCM as available
firmware: qcom: scm: take struct device as argument in SHM bridge enable
firmware: qcom: scm: remove unused arguments from SHM bridge routines
soc: qcom: rpmh-rsc: Add RSC version 4 support
memory: tegra: Add Tegra264 MC and EMC support
firmware: tegra: bpmp: Fix build failure for tegra264-only config
...
|
|
qcom_scm_shm_bridge_enable() is used early in the SCM initialization
routine. It makes an SCM call and so expects the internal __scm pointer
in the SCM driver to be assigned. For this reason the tzmem memory pool
is allocated *after* this pointer is assigned. However, this can lead to
a crash if another consumer of the SCM API makes a call using the memory
pool between the assignment of the __scm pointer and the initialization
of the tzmem memory pool.
As qcom_scm_shm_bridge_enable() is a special case, not meant to be
called by ordinary users, pull it into the local SCM header. Make it
take struct device as argument. This is the device that will be used to
make the SCM call as opposed to the global __scm pointer. This will
allow us to move the tzmem initialization *before* the __scm assignment
in the core SCM driver.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250630-qcom-scm-race-v2-2-fa3851c98611@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
qcom_scm_shm_bridge_create() and qcom_scm_shm_bridge_delete() take
struct device as argument but don't use it. Remove it from these
functions' prototypes.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20250630-qcom-scm-race-v2-1-fa3851c98611@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
As there no longer any users outside the zynqmp firmware driver of
zynqmp_pm_init_finalize(), let's turn into a local static function.
Cc: Michal Simek <michal.simek@amd.com>
Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Colibri iMX8X
Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> # TI AM62A,Xilinx ZynqMP ZCU106
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20250701114733.636510-16-ulf.hansson@linaro.org
|
|
The system manager indices names are different for each platform, rename
the indices for i.MX95 to differentiate with other platform.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Link: https://patch.msgid.link/20250620055229.965942-3-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
On i.MX94, the MQS2 also needs to be configured by SCMI interface, add
sm_index variable in struct fsl_mqs_soc_data to distinguish the MQS1 and
MQS2 on this platform.
Add the system manager indices for i.MX94 in the header file.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Link: https://patch.msgid.link/20250620055229.965942-2-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Remove two unused pointers from struct cs_dsp_coeff_ctl by taking the
struct list_head out of struct cs_dsp_alg_region. On a x86_64 build
this saves 16 bytes per control.
Each cs_dsp_coeff_ctl instance needs to keep information about the
algorithm region it refers to. This is done by embedding an instance
of struct cs_dsp_alg_region. But cs_dsp_alg_region was also used to
store entries in a list of algorithm regions, and so had a struct
list_head object for that purpose. This list_head object is not used
with the embedded object in struct cs_dsp_alg_region so was just
wasted bytes.
A new struct cs_dsp_alg_region_list_item has been defined for creating
the list of algorithm regions. It contains a struct cs_dsp_alg_region
and a struct list_head.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250616103052.66537-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers
Arm SCMI updates for v6.16
1. Quirk framework to handle buggy firmware
With SCMI gaining broader adoption across arm64 platforms, it's
increasingly important to address how we consistently manage out-of-spec
SCMI firmware already deployed in the field. This change introduces a
lightweight quirk framework built around static_keys, enabling developers to:
- Define quirks and their match criteria, which can include:
o A list of compatibles ({ comp, comp2, NULL })
o Vendor ID / Sub-Vendor ID
o Firmware implementation version ranges ([Min_Vers, Max_Vers])
Matching proceeds from the most specific (longest match) to the least
specific. NULL entries are treated as wildcards (i.e., match any value).
This flexibility allows matching very specific combinations or just a
general compatible string.
The quirk code blocks/snippets implementing the workaround are placed near
their intended usage and guarded by a static_key that's tied to the quirk.
Once the SCMI core stack is initialized and retrieves platform info via the
base protocol, any matching quirks will have their associated static_keys
enabled.
2. Quirk for Qualcomm X1E platforms
On some Qualcomm X1E platforms, such as the Lenovo ThinkPad T14s, the
SCMI firmware fails to set the FastChannel support bit for PERF_LEVEL_GET,
yet it crashes when the driver attempts to fall back to standard messaging
which is clearly out-of-spec behavior.
To work around this, the new SCMI quirk framework is used to
unconditionally enable FC initialization for this firmware version.
In the future, once the fixed firmware version is identified, an upper
version bound can be added to the quirk match criteria. Alternatively,
matching can be further restricted using a SoC-specific compatible string
if always enabling FC proves problematic elsewhere.
3. Support for NXP i.MX LMM/CPU vendor protocol extensions
The i.MX95 System Manager (SM) implements Logical Machine Management (LMM)
and a CPU protocol to manage Logical Machines (LM) and CPUs (e.g., M7).
These changes integrate the vendor-specific protocol extensions
implementing the LMM and CPU protocols for the i.MX95, facilitating
standardized communication between the operating system and the platform's
firmware, which will be used by remoteproc drivers. The changes also
include the necessary device tree bindings.
4. Miscellaneous cleanups/changes
These mainly include polling support in SCMI raw mode. The cleanups
centralize error logging for SCMI device creation into a single helper
function, consolidate the device matching logic into a single function, and
ensure that devices must have a name for registration—removing support for
unnamed devices when matching drivers and devices for probing. Transport
devices are now excluded from bus matching, and the correct assignment of
the parent device for the arm-scmi platform device is ensured in the
transport drivers.
* tag 'scmi-updates-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: quirk: Force perf level get fastchannel
firmware: arm_scmi: quirk: Fix CLOCK_DESCRIBE_RATES triplet
firmware: arm_scmi: Add common framework to handle firmware quirks
firmware: arm_scmi: Ensure that the message-id supports fastchannel
MAINTAINERS: add entry for i.MX SCMI extensions
firmware: imx: Add i.MX95 SCMI CPU driver
firmware: imx: Add i.MX95 SCMI LMM driver
firmware: arm_scmi: imx: Add i.MX95 CPU Protocol
firmware: arm_scmi: imx: Add i.MX95 LMM protocol
dt-bindings: firmware: Add i.MX95 SCMI LMM and CPU protocol
firmware: arm_scmi: imx: Add LMM and CPU documentation
firmware: arm_scmi: Add polling support to raw mode
firmware: arm_scmi: Exclude transport devices from bus matching
firmware: arm_scmi: Assign correct parent to arm-scmi platform device
firmware: arm_scmi: Refactor error logging from SCMI device creation to single helper
firmware: arm_scmi: Refactor device matching logic to eliminate duplication
firmware: arm_scmi: Ensure scmi_devices are always matched by name as well
Link: https://lore.kernel.org/r/20250507134713.49039-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/drivers
Samsung SoC drivers for v6.16
Several improvements to Exynos ACPM (Alive Clock and Power Manager)
driver:
1. Handle communication timeous better.
2. Avoid sleeping, so users (PMIC) can still transfer during system
shutdown.
3. Fix reading longer messages from them firmware.
4. Deferred probe improvements.
5. Model the user of ACPM - PMIC - a as child device and export
devm_acpm_get_by_node() for such use case.
* tag 'samsung-drivers-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
firmware: exynos-acpm: Correct kerneldoc and use typical np argument name
firmware: exynos-acpm: introduce devm_acpm_get_by_node()
firmware: exynos-acpm: populate devices from device tree data
firmware: exynos-acpm: silence EPROBE_DEFER error on boot
firmware: exynos-acpm: fix reading longer results
dt-bindings: firmware: google,gs101-acpm-ipc: add PMIC child node
firmware: exynos-acpm: allow use during system shutdown
firmware: exynos-acpm: use ktime APIs for timeout detection
Link: https://lore.kernel.org/r/20250501103541.13795-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
To allow ACPM clients to simply be children of the ACPM node in DT,
they need to be able to get the ACPM handle based on that ACPM node
directly.
Add an API to allow them to do so, devm_acpm_get_by_node().
At the same time, the previous approach of acquiring the ACPM handle
via a DT phandle is now obsolete and we can remove
devm_acpm_get_by_phandle(), which was there to facilitate that. There
are no existing or anticipated upcoming users of that API, because all
clients should be children of the ACPM node going forward.
Note that no DTs have been merged that use the old approach, so doing
this API change in this driver now will not affect any existing DTs or
client drivers.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250327-acpm-children-v1-2-0afe15ee2ff7@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
The i.MX95 System manager exports SCMI CPU protocol for linux to manage
cpu cores. The driver is to use the cpu Protocol interface to
start, stop a cpu cores (eg, M7).
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Message-Id: <20250408-imx-lmm-cpu-v4-6-4c5f4a456e49@nxp.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
The i.MX95 System manager exports SCMI LMM protocol for linux to manage
Logical Machines. The driver is to use the LMM Protocol interface to
boot, shutdown a LM.
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Message-Id: <20250408-imx-lmm-cpu-v4-5-4c5f4a456e49@nxp.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Call cs_dsp_mock_xm_header_get_fw_version() to get the firmware version
from the dummy XM header data in cs_dsp_bin_err_test_common_init().
Make the same change to cs_dsp_bin_test_common_init() and remove the
cs_dsp_mock_xm_header_get_fw_version_from_regmap() function.
The code in cs_dsp_test_bin.c was correctly calling
cs_dsp_mock_xm_header_get_fw_version_from_regmap() to fetch the fw version
from a dummy header it wrote to XM registers. However in
cs_dsp_test_bin_error.c the test doesn't stuff a dummy header into XM, it
populates it the normal way using a wmfw file. It should have called
cs_dsp_mock_xm_header_get_fw_version() to get the data from its blob
buffer, but was calling cs_dsp_mock_xm_header_get_fw_version_from_regmap().
As nothing had been written to the registers this returned the value of
uninitialized data.
The only other use of cs_dsp_mock_xm_header_get_fw_version_from_regmap()
was cs_dsp_test_bin.c, but it doesn't need to use it. It already has a
blob buffer containing the dummy XM header so it can use
cs_dsp_mock_xm_header_get_fw_version() to read from that.
Fixes: cd8c058499b6 ("firmware: cs_dsp: Add KUnit testing of bin error cases")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250410132129.1312541-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"These are the updates for SoC specific drivers and related subsystems:
- Firmware driver updates for SCMI, FF-A and SMCCC firmware
interfaces, adding support for additional firmware features
including SoC identification and FF-A SRI callbacks as well as
various bugfixes
- Memory controller updates for Nvidia and Mediatek
- Reset controller support for microchip sam9x7 and imx8qxp/imx8qm
- New hardware support for multiple Mediatek, Renesas and Samsung
Exynos chips
- Minor updates on Zynq, Qualcomm, Amlogic, TI, Samsung, Nvidia and
Apple chips
There will be a follow up with a few more driver updates that are
still causing build regressions at the moment"
* tag 'soc-drivers-6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (97 commits)
irqchip: Add support for Amlogic A4 and A5 SoCs
dt-bindings: interrupt-controller: Add support for Amlogic A4 and A5 SoCs
reset: imx: fix incorrect module device table
dt-bindings: power: qcom,kpss-acc-v2: add qcom,msm8916-acc compatible
bus: qcom-ssc-block-bus: Fix the error handling path of qcom_ssc_block_bus_probe()
bus: qcom-ssc-block-bus: Remove some duplicated iounmap() calls
soc: qcom: pd-mapper: Add support for SDM630/636
reset: imx: Add SCU reset driver for i.MX8QXP and i.MX8QM
dt-bindings: firmware: imx: add property reset-controller
dt-bindings: reset: atmel,at91sam9260-reset: add sam9x7
memory: mtk-smi: Add ostd setting for mt8192
dt-bindings: soc: samsung: exynos-usi: Drop unnecessary status from example
firmware: tegra: bpmp: Fix typo in bpmp-abi.h
soc/tegra: pmc: Use str_enable_disable-like helpers
soc: samsung: include linux/array_size.h where needed
firmware: arm_scmi: use ioread64() instead of ioread64_hi_lo()
soc: mediatek: mtk-socinfo: Add extra entry for MT8395AV/ZA Genio 1200
soc: mediatek: mt8188-mmsys: Add support for DSC on VDO0
soc: mediatek: mmsys: Migrate all tables to MMSYS_ROUTE() macro
soc: mediatek: mt8365-mmsys: Fix routing table masks and values
...
|
|
The T-Head TH1520 SoC uses an E902 co-processor running Always-On (AON)
firmware to manage power, clock, and other system resources [1]. This
patch introduces a driver implementing the AON firmware protocol,
allowing the Linux kernel to communicate with the firmware via mailbox
channels. Through an RPC-based interface, the kernel can initiate power
state transitions, update resource configurations, and perform other
AON-related tasks.
[1]
Link: https://openbeagle.org/beaglev-ahead/beaglev-ahead/-/blob/main/docs/TH1520%20System%20User%20Manual.pdf
Signed-off-by: Michal Wilczynski <m.wilczynski@samsung.com>
Acked-by: Drew Fustini <drew@pdp7.com>
Link: https://lore.kernel.org/r/20250311171900.1549916-3-m.wilczynski@samsung.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Alive Clock and Power Manager (ACPM) Message Protocol is defined for
the purpose of communication between the ACPM firmware and masters
(AP, AOC, ...). ACPM firmware operates on the Active Power Management
(APM) module that handles overall power activities.
ACPM and masters regard each other as independent hardware component and
communicate with each other using mailbox messages and shared memory.
This protocol driver provides the interface for all the client drivers
making use of the features offered by the APM. Add ACPM protocol support.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/20250213-gs101-acpm-v9-2-8b0281b93c8b@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"These are changes to SoC specific drivers and DT bindings that don't
have a separate subsystem tree, or that get grouped here for
simplicity.
Nothing out of the ordinary for the 6.14 release here:
- Most of the updates are for Qualcomm specific drivers, adding
support for additional SoCs in the exssting drivers, and support
for wrapped encryption key access in the SCM firmware.
- The Arm SCMI firmware code gains support for having multiple
instances of firmware running, and better module auto loading.
- A few minor updates for litex, samsung, ti, tegra, mediatek, imx
and renesas platforms.
- Reset controller updates for amlogic, to add support for the A1 soc
and clean up the existing code.
- Memory controller updates for ti davinci aemif, refactoring the
code and adding a few interfaces to other drivers"
* tag 'soc-drivers-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (58 commits)
drivers/soc/litex: Use devm_register_restart_handler()
reset: amlogic: aux: drop aux registration helper
reset: amlogic: aux: get regmap through parent device
reset: amlogic: add support for A1 SoC in auxiliary reset driver
dt-bindings: reset: add bindings for A1 SoC audio reset controller
soc/tegra: fuse: Update Tegra234 nvmem keepout list
soc/tegra: Fix spelling error in tegra234_lookup_slave_timeout()
soc/tegra: cbb: Drop unnecessary debugfs error handling
firmware: qcom: scm: add calls for wrapped key support
soc: qcom: pd_mapper: Add SM7225 compatible
dt-bindings: firmware: qcom,scm: Document ipq5424 SCM
soc: qcom: llcc: Update configuration data for IPQ5424
dt-bindings: cache: qcom,llcc: Add IPQ5424 compatible
soc: mediatek: mtk-devapc: Fix leaking IO map on driver remove
soc: mediatek: mtk-devapc: Fix leaking IO map on error paths
firmware: qcom: scm: smc: Narrow 'mempool' variable scope
firmware: qcom: scm: smc: Handle missing SCM device
firmware: qcom: scm: Cleanup global '__scm' on probe failures
firmware: qcom: scm: Fix missing read barrier in qcom_scm_get_tzmem_pool()
firmware: qcom: scm: Fix missing read barrier in qcom_scm_is_available()
...
|
|
Add helper functions for the SCM calls required to support
hardware-wrapped inline storage encryption keys. These SCM calls manage
wrapped keys via Qualcomm's Hardware Key Manager (HWKM), which can only
be accessed from TrustZone.
QCOM_SCM_ES_GENERATE_ICE_KEY and QCOM_SCM_ES_IMPORT_ICE_KEY create a new
long-term wrapped key, with the former making the hardware generate the
key and the latter importing a raw key. QCOM_SCM_ES_PREPARE_ICE_KEY
converts the key to ephemerally-wrapped form so that it can be used for
inline storage encryption. These are planned to be wired up to new
ioctls via the blk-crypto framework; see the proposed documentation for
the hardware-wrapped keys feature for more information.
Similarly there's also QCOM_SCM_ES_DERIVE_SW_SECRET which derives a
"software secret" from an ephemerally-wrapped key and will be wired up
to the corresponding operation in the blk_crypto_profile.
These will all be used by the ICE driver in drivers/soc/qcom/ice.c.
[EB: merged related patches, fixed error handling, fixed naming, fixed
docs for size parameters, fixed qcom_scm_has_wrapped_key_support(),
improved comments, improved commit message.]
Signed-off-by: Gaurav Kashyap <quic_gaurkash@quicinc.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20241213041958.202565-9-ebiggers@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add a mock firmware file that emulates what the firmware build tools
would normally create. This will be used by KUnit tests to generate a
test bin file.
The data payload in a bin is an opaque blob, so the mock bin only needs
to generate the appropriate file header and description block for each
payload blob.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20241212143725.1381013-5-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a mock firmware file that emulates what the firmware build tools
would normally create. This will be used by KUnit tests to generate a
test wmfw file.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20241212143725.1381013-4-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add helper functions to implement an emulation of the DSP memory map.
There are three main groups of functionality:
1. Define a mock cs_dsp_region table.
2. Calculate the addresses of memory and algorithms from the firmware
header in XM.
3. Build a mock XM header in emulated XM.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20241212143725.1381013-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a mock regmap implementation to act as a simulated DSP for KUnit
testing. This is built as a utility module so that it could be used by
clients of cs_dsp to create a mock "DSP" for their own testing.
cs_dsp interacts with the DSP only through registers. Most of the
register space of the DSP is RAM. ADSP cores have a small set of control
registers. HALO Core DSPs have a much larger set of control registers but
only a small subset are used.
Most writes are "blind" in the sense that cs_dsp does not expect to
receive any sort of response from the DSP. So there isn't any need to
emulate a "DSP", only a set of registers that can be written and read
back.
The idea of the mock regmap is to use the cache to accumulate writes
which can then be tested against the values that are expected to be in
the registers.
Stray writes can be detected by dropping the cache entries for all
addresses that should have been written and then issuing a regcache_sync().
If this causes bus writes it means there were writes to unexpected
registers.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20241212143725.1381013-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
