summaryrefslogtreecommitdiff
path: root/include/linux/clk/ti.h
AgeCommit message (Collapse)AuthorFilesLines
2014-06-06ARM: OMAP5+: dpll: support Duty Cycle Correction(DCC)Andrii Tseglytskyi1-0/+4
Duty Cycle Correction(DCC) needs to be enabled if the MPU is to run at frequencies beyond 1.4GHz for OMAP5, DRA75x, DRA72x. MPU DPLL has a limitation on the maximum frequency it can be locked at. Duty Cycle Correction circuit is used to recover a correct duty cycle for achieving higher frequencies (hardware internally switches output to M3 output(CLKOUTHIF) from M2 output (CLKOUT)). For further information, See the note on OMAP5432 Technical Reference Manual(SWPU282U) chapter 3.6.3.3.1 "DPLLs Output Clocks Parameters", and also the "OMAP543x ES2.0 DM Operating Conditions Addendum v0.5" chapter 2.1 "Micro Processor Unit (MPU)". Equivalent information is present in relevant DRA75x, 72x documentation(SPRUHP2E, SPRUHI2P). Signed-off-by: Andrii Tseglytskyi <andrii.tseglytskyi@ti.com> Signed-off-by: Taras Kondratiuk <taras@ti.com> Signed-off-by: J Keerthy <j-keerthy@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> [t-kristo@ti.com: added TRM / DM references for DCC clock rate] Signed-off-by: Tero Kristo <t-kristo@ti.com>
2014-05-28ARM: OMAP2: clock: add DT boot support for cpufreq_ckTero Kristo1-0/+1
The clock and clkdev for this are added manually. Signed-off-by: Tero Kristo <t-kristo@ti.com>
2014-05-28CLK: TI: OMAP2: add clock init supportTero Kristo1-0/+2
Adds support for registering the alias clocks, boot time clock-enable list and disabling autoidle of clocks. Signed-off-by: Tero Kristo <t-kristo@ti.com>
2014-05-28CLK: TI: interface: add support for omap2430 specific interface clockTero Kristo1-0/+1
OMAP2430 I2CHS modules require specific hardware ops to be used, so added a new compatible string for this. Signed-off-by: Tero Kristo <t-kristo@ti.com>
2014-05-28CLK: TI: APLL: add support for omap2 apllsTero Kristo1-1/+20
This patch adds support for omap2 type aplls, which have gating and autoidle functionality. Signed-off-by: Tero Kristo <t-kristo@ti.com>
2014-05-28CLK: TI: DPLL: add support for omap2 core dpllTero Kristo1-0/+6
OMAP2 has slightly different DPLL compared to later OMAP generations. This patch adds support for the ti,omap2-dpll-core-clock and also adds the bindings documentation. Signed-off-by: Tero Kristo <t-kristo@ti.com>
2014-02-19ARM: OMAP2+: clock: fix clkoutx2 with CLK_SET_RATE_PARENTTomi Valkeinen1-0/+4
If CLK_SET_RATE_PARENT is set for a clkoutx2 clock, calling clk_set_rate() on the clock "skips" the x2 multiplier as there are no set_rate and round_rate functions defined for the clkoutx2. This results in getting double the requested clock rates, breaking the display on omap3430 based devices. This got broken when d0f58bd3bba3877fb1af4664c4e33273d36f00e4 and related patches were merged for v3.14, as omapdss driver now relies more on the clk-framework and CLK_SET_RATE_PARENT. This patch implements set_rate and round_rate for clkoutx2. Tested on OMAP3430, OMAP3630, OMAP4460. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2014-01-18CLK: TI: add am43xx clock init fileTero Kristo1-0/+1
clk-43xx.c now contains the clock init functionality for am43xx, including DT clock registration and adding of static clkdev entries. Signed-off-by: Tero Kristo <t-kristo@ti.com> Tested-by: Nishanth Menon <nm@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-01-18CLK: TI: add omap3 clock init fileTero Kristo1-0/+5
clk-3xxx.c now contains the clock init functionality for omap3, including DT clock registration and adding of static clkdev entries. Signed-off-by: Tero Kristo <t-kristo@ti.com> Tested-by: Nishanth Menon <nm@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-01-18CLK: TI: add interface clock support for OMAP3Tero Kristo1-0/+5
OMAP3 has interface clocks in addition to functional clocks, which require special handling for the autoidle and idle status register offsets mainly. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-01-18CLK: TI: add am33xx clock init fileTero Kristo1-0/+2
clk-33xx.c now contains the clock init functionality for am33xx, including DT clock registration and adding of static clkdev entries. This patch also moves the omap2_clk_enable_init_clocks declaration to the driver include, as this is needed by the am33xx clock init code. Signed-off-by: Tero Kristo <t-kristo@ti.com> Tested-by: Nishanth Menon <nm@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-01-18CLK: TI: add dra7 clock init fileTero Kristo1-0/+1
clk-7xx.c now contains the clock init functionality for dra7, including DT clock registration and adding of static clkdev entries. Signed-off-by: Tero Kristo <t-kristo@ti.com> Tested-by: Nishanth Menon <nm@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-01-18CLK: TI: add omap5 clock init fileTero Kristo1-0/+1
clk-54xx.c now contains the clock init functionality for omap5, including DT clock registration and adding of static clkdev entries. Signed-off-by: Tero Kristo <t-kristo@ti.com> Tested-by: Nishanth Menon <nm@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-01-18CLK: TI: add omap4 clock init fileTero Kristo1-0/+3
clk-44xx.c now contains the clock init functionality for omap4, including DT clock registration and adding of static clkdev entries. Signed-off-by: Tero Kristo <t-kristo@ti.com> Tested-by: Nishanth Menon <nm@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-01-18clk: ti: add support for basic mux clockTero Kristo1-0/+1
ti,mux-clock provides now a binding for basic mux support. This is just using the basic clock type. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-01-18CLK: TI: add support for clockdomain bindingTero Kristo1-0/+1
Some OMAP clocks require knowledge about their parent clockdomain for book keeping purposes. This patch creates a new DT binding for TI clockdomains, which act as a collection of device clocks. Clockdomain itself is rather misleading name for the hardware functionality, as at least on OMAP4 / OMAP5 / DRA7 the clockdomains can be collections of either clocks and/or IP blocks, thus idle-domain or such might be more appropriate. For most cases on these SoCs, the kernel doesn't even need the information and the mappings can be ignored. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-01-18CLK: TI: add support for gate clockTero Kristo1-0/+6
This patch adds support for TI specific gate clocks. These behave as basic gate-clock, but have different ops / hw-ops for controlling the actual gate, for example waiting until the clock is ready. Several sub-types are supported: - ti,gate-clock: basic gate clock with default ops/hwops - ti,clkdm-gate-clock: clockdomain level gate control - ti,dss-gate-clock: gate clock with DSS specific hardware handling - ti,am35xx-gate-clock: gate clock with AM35xx specific hardware handling - ti,hsdiv-gate-clock: gate clock with OMAP36xx hardware errata handling Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-01-18CLK: ti: add support for ti divider-clockTero Kristo1-0/+2
This patch adds support for TI divider clock binding, which simply uses the basic clock divider to provide the features needed. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-01-18clk: ti: add composite clock supportTero Kristo1-0/+12
This is a multipurpose clock node, which contains support for multiple sub-clocks. Uses basic composite clock type to implement the actual functionality, and TI specific gate, mux and divider clocks. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-01-18CLK: TI: add autoidle supportTero Kristo1-0/+9
TI clk driver now routes some of the basic clocks through own registration routine to allow autoidle support. This routine just checks a couple of device node properties and adds autoidle support if required, and just passes the registration forward to basic clocks. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-01-18CLK: TI: Add DPLL clock supportTero Kristo1-0/+172
The OMAP clock driver now supports DPLL clock type. This patch also adds support for DT DPLL nodes. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-01-18CLK: ti: add init support for clock IP blocksTero Kristo1-0/+35
ti_dt_clk_init_provider() can now be used to initialize the contents of a single clock IP block. This parses all the clocks under the IP block and calls the corresponding init function for them. This patch also introduces a helper function for the TI clock drivers to get register info from DT and append the master IP info to this. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-01-18CLK: TI: add DT alias clock registration mechanismTero Kristo1-0/+42
Some devices require their clocks to be available with a specific dev-id con-id mapping. With DT, the clocks can be found by default only with their name, or alternatively through the device node of the consumer. With drivers, that don't support DT fully yet, add mechanism to register specific clock names. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-10 17:50:12 +0300