Age | Commit message (Collapse) | Author | Files | Lines |
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC update from Arnd Bergmann:
"Convert ep93xx to devicetree
This concludes a long journey towards replacing the old board files
with devictree description on the Cirrus Logic EP93xx platform.
Nikita Shubin has been working on this for a long time, for details
see the last post on
https://lore.kernel.org/lkml/20240909-ep93xx-v12-0-e86ab2423d4b@maquefel.me/"
* tag 'soc-ep93xx-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (47 commits)
dt-bindings: gpio: ep9301: Add missing "#interrupt-cells" to examples
MAINTAINERS: Update EP93XX ARM ARCHITECTURE maintainer
soc: ep93xx: drop reference to removed EP93XX_SOC_COMMON config
net: cirrus: use u8 for addr to calm down sparse
dmaengine: cirrus: use snprintf() to calm down gcc 13.3.0
dmaengine: ep93xx: Fix a NULL vs IS_ERR() check in probe()
pinctrl: ep93xx: Fix raster pins typo
spi: ep93xx: update kerneldoc comments for ep93xx_spi
clk: ep93xx: Fix off by one in ep93xx_div_recalc_rate()
clk: ep93xx: add module license
dmaengine: cirrus: remove platform code
ASoC: cirrus: edb93xx: Delete driver
ARM: ep93xx: soc: drop defines
ARM: ep93xx: delete all boardfiles
ata: pata_ep93xx: remove legacy pinctrl use
pwm: ep93xx: drop legacy pinctrl
ARM: ep93xx: DT for the Cirrus ep93xx SoC platforms
ARM: dts: ep93xx: Add EDB9302 DT
ARM: dts: ep93xx: add ts7250 board
ARM: dts: add Cirrus EP93XX SoC .dtsi
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver updates from Greg KH:
"Here is the "big" set of char/misc and other driver subsystem changes
for 6.12-rc1.
Lots of changes in here, primarily dominated by the usual IIO driver
updates and additions, but there are also small driver subsystem
updates all over the place. Included in here are:
- lots and lots of new IIO drivers and updates to existing ones
- interconnect subsystem updates and new drivers
- nvmem subsystem updates and new drivers
- mhi driver updates
- power supply subsystem updates
- kobj_type const work for many different small subsystems
- comedi driver fix
- coresight subsystem and driver updates
- fpga subsystem improvements
- slimbus fixups
- binder new feature addition for "frozen" notifications
- lots and lots of other small driver updates and cleanups
All of these have been in linux-next for a long time with no reported
problems"
* tag 'char-misc-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (354 commits)
greybus: gb-beagleplay: Add firmware upload API
arm64: dts: ti: k3-am625-beagleplay: Add bootloader-backdoor-gpios to cc1352p7
dt-bindings: net: ti,cc1352p7: Add bootloader-backdoor-gpios
MAINTAINERS: Update path for U-Boot environment variables YAML
nvmem: layouts: add U-Boot env layout
comedi: ni_routing: tools: Check when the file could not be opened
ocxl: Remove the unused declarations in headr file
hpet: Fix the wrong format specifier
uio: Constify struct kobj_type
cxl: Constify struct kobj_type
binder: modify the comment for binder_proc_unlock
iio: adc: axp20x_adc: add support for AXP717 ADC
dt-bindings: iio: adc: Add AXP717 compatible
iio: adc: axp20x_adc: Add adc_en1 and adc_en2 to axp_data
w1: ds2482: Drop explicit initialization of struct i2c_device_id::driver_data to 0
tools: iio: rm .*.cmd when make clean
iio: adc: standardize on formatting for id match tables
iio: proximity: aw96103: Add support for aw96103/aw96105 proximity sensor
bus: mhi: host: pci_generic: Enable EDL trigger for Foxconn modems
bus: mhi: host: pci_generic: Update EDL firmware path for Foxconn modems
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"The core clk framework is left largely untouched this time around
except for support for the newly ratified DT property
'assigned-clock-rates-u64'.
I'm much more excited about the support for loading DT overlays from
KUnit tests so that we can test how the clk framework parses DT nodes
during clk registration. The clk framework has some places that are
highly DeviceTree dependent so this charts the path to extend the
KUnit tests to cover even more framework code in the future. I've got
some more tests on the list that use the DT overlay support, but they
uncovered issues with clk unregistration that I'm still working on
fixing.
Outside the core, the clk driver update pile is dominated by Qualcomm
and Renesas SoCs, making it fairly usual. Looking closer, there are
fixes for things all over the place, like adding missing clk
frequencies or moving defines for the number of clks out of DT binding
headers into the drivers. There are even conversions of DT bindings to
YAML and migration away from strings to describe clk topology. Overall
it doesn't look unusual so I expect the new drivers to be where we'll
have fixes in the coming weeks.
Core:
- KUnit tests for clk registration and fixed rate basic clk type
- A couple more devm helpers, one consumer and one provider
- Support for assigned-clock-rates-u64
New Drivers:
- Camera, display and GPU clocks on Qualcomm SM4450
- Camera clocks on Qualcomm SM8150
- Rockchip rk3576 clks
- Microchip SAM9X7 clks
- Renesas RZ/V2H(P) (R9A09G057) clks
Updates:
- Mark a bunch of struct freq_tbl const to reduce .data usage
- Add Qualcomm MSM8226 A7PLL and Regera PLL support
- Fix the Qualcomm Lucid 5LPE PLL configuration sequence to not reuse
Trion, as they do differ
- A number of fixes to the Qualcomm SM8550 display clock driver
- Fold Qualcomm SM8650 display clock driver into SM8550 one
- Add missing clocks and GDSCs needed for audio on Qualcomm MSM8998
- Add missing USB MP resets, GPLL9, and QUPv3 DFS to Qualcomm SC8180X
- Fix sdcc clk frequency tables on Qualcomm SC8180X
- Drop the Qualcomm SM8150 gcc_cpuss_ahb_clk_src
- Mark Qualcomm PCIe GDSCs as RET_ON on sm8250 and sm8540 to avoid
them turning off during suspend
- Use the HW_CTRL mechanism on Qualcomm SM8550 video clock controller
GDSCs
- Get rid of CLK_NR_CLKS defines in Rockchip DT binding headers
- Some fixes for Rockchip rk3228 and rk3588
- Exynos850: Add clock for Thermal Management Unit
- Exynos7885: Fix duplicated ID in the header, add missing TOP PLLs
and add clocks for USB block in the FSYS clock controller
- ExynosAutov9: Add DPUM clock controller
- ExynosAutov920: Add new (first) clock controllers: TOP and PERIC0
(and a bit more complete bindings)
- Use clk_hw pointer instead of fw_name for acm_aud_clk[0-1]_sel
clocks on i.MX8Q as parents in ACM provider
- Add i.MX95 NETCMIX support to the block control provider
- Fix parents for ENETx_REF_SEL clocks on i.MX6UL
- Add USB clocks, resets and power domains on Renesas RZ/G3S
- Add Generic Timer (GTM), I2C Bus Interface (RIIC), SD/MMC Host
Interface (SDHI) and Watchdog Timer (WDT) clocks and resets on
Renesas RZ/V2H
- Add PCIe, PWM, and CAN-FD clocks on Renesas R-Car V4M
- Add LCD controller clocks and resets on Renesas RZ/G2UL
- Add DMA clocks and resets on Renesas RZ/G3S
- Add fractional multiplication PLL support on Renesas R-Car Gen4
- Document support for the Renesas RZ/G2M v3.0 (r8a774a3) SoC
- Support for the Microchip SAM9X7 SoC as follows:
- Updates for the Microchip PLL drivers
- DT binding documentation updates (for the new clock driver and for
the slow clock controller that SAM9X7 is using)
- A fix for the Microchip SAMA7G5 clock driver to avoid allocating
more memory than necessary
- Constify some Amlogic structs
- Add SM1 eARC clocks for Amlogic
- Introduce a symbol namespace for Amlogic clock specific symbols
- Add reset controller support to audiomix block control on i.MX
- Add CLK_SET_RATE_PARENT flag to all audiomix clocks and to i.MX7D
lcdif_pixel_src clock
- Fix parent clocks for earc_phy and audpll on i.MX8MP
- Fix default parents for enet[12]_ref_sel on i.MX6UL
- Add ops in composite 8M and 93 that allow no-op on disable
- Add check for PCC present bit on composite 7ULP register
- Fix fractional part for fracn-gppll on prepare in i.MX
- Fix clock tree update for TF-A managed clocks on i.MX8M
- Drop CLK_SET_PARENT_GATE for DRAM mux on i.MX7D
- Add the SAI7 IPG clock for i.MX8MN
- Mark the 'nand_usdhc_bus' clock as non-critical on i.MX8MM
- Add LVDS bypass clocks on i.MX8QXP
- Add muxes for MIPI and PHY ref clocks on i.MX
- Reorder dc0_bypass0_clk, lcd_pxl and dc1_disp clocks on i.MX8QXP
- Add 1039.5MHz and 800MHz rates to fracn-gppll table on i.MX
- Add CLK_SET_RATE_PARENT for media_disp pixel clocks on i.MX8QXP
- Add some module descriptions to the i.MX generic and the i.MXRT1050
driver
- Fix return value for bypass for composite i.MX7ULP
- Move Mediatek clk bindings to clock/
- Convert some more clk bindings to dt schema"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (180 commits)
clk: Switch back to struct platform_driver::remove()
dt-bindings: clock, reset: fix top-comment indentation rk3576 headers
clk: rockchip: remove unused mclk_pdm0_p/pdm0_p definitions
clk: provide devm_clk_get_optional_enabled_with_rate()
clk: fixed-rate: add devm_clk_hw_register_fixed_rate_parent_data()
clk: imx6ul: fix clock parent for IMX6UL_CLK_ENETx_REF_SEL
clk: renesas: r9a09g057: Add clock and reset entries for GTM/RIIC/SDHI/WDT
clk: renesas: rzv2h: Add support for dynamic switching divider clocks
clk: renesas: r9a08g045: Add clocks, resets and power domains for USB
clk: rockchip: fix error for unknown clocks
clk: rockchip: rk3588: drop unused code
clk: rockchip: Add clock controller for the RK3576
clk: rockchip: Add new pll type pll_rk3588_ddr
dt-bindings: clock, reset: Add support for rk3576
dt-bindings: clock: rockchip,rk3588-cru: drop unneeded assigned-clocks
clk: rockchip: rk3588: Fix 32k clock name for pmu_24m_32k_100m_src_p
clk: imx95: enable the clock of NETCMIX block control
dt-bindings: clock: add RMII clock selection
dt-bindings: clock: add i.MX95 NETCMIX block control
clk: imx: imx8: Use clk_hw pointer for self registered clock in clk_parent_data
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"Core changes:
- Add support for "input-schmitt-microvolt" property, as used in the
Sophgo SoC
New drivers:
- Mobileye EyeQ5 pin controller, I think this is an automotive SoC
- Rockchip rk3576 pin control support
- Sophgo CV1800 series pin controllers: CV1800B, CV1812H and SG2000
Improvements:
- Gradual improvements to Renesas, Samsung, Qualcomm, Nuvoton and a
few other drivers"
* tag 'pinctrl-v6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (67 commits)
pinctrl: intel: Constify struct intel_pinctrl parameter
pinctrl: Remove redundant null pointer checks in pinctrl_remove_device_debugfs()
pinctrl: baytrail: Drop duplicate return statement
pinctrl: intel: Inline intel_gpio_community_irq_handler()
dt-bindings: pinctrl: qcom: add missing type to GPIO hogs
pinctrl: madera: Simplify with dev_err_probe()
pinctrl: k210: Use devm_clk_get_enabled() helpers
pinctrl: Join split messages and remove double whitespace
pinctrl: renesas: rzg2l: Move pinconf_to_config_argument() call outside of switch cases
pinctrl: renesas: rzg2l: Introduce single macro for digital noise filter configuration
pinctrl: renesas: rzg2l: Replace of_node_to_fwnode() with more suitable API
pinctrl: mvebu: Fix devinit_dove_pinctrl_probe function
pinctrl: sunxi: Use devm_clk_get_enabled() helpers
pinctrl: sophgo: cv18xx: fix missed __iomem type identifier
pinctrl: stmfx: Use string_choices API instead of ternary operator
pinctrl: nomadik: Use kmemdup_array instead of kmemdup for multiple allocation
pinctrl: intel: Introduce for_each_intel_gpio_group() helper et al.
pinctrl: intel: Constify intel_get_community() returned object
pinctrl: intel: Implement high impedance support
pinctrl: intel: Add __intel_gpio_get_direction() helper
...
|
|
clk-next
* clk-devm:
clk: provide devm_clk_get_optional_enabled_with_rate()
clk: fixed-rate: add devm_clk_hw_register_fixed_rate_parent_data()
* clk-samsung:
clk: samsung: add top clock support for ExynosAuto v920 SoC
clk: samsung: clk-pll: Add support for pll_531x
dt-bindings: clock: add ExynosAuto v920 SoC CMU bindings
clk: samsung: exynos7885: Add USB related clocks to CMU_FSYS
clk: samsung: clk-pll: Add support for pll_1418x
clk: samsung: exynosautov9: add dpum clock support
dt-bindings: clock: exynosautov9: add dpum clock
clk: samsung: exynos7885: Add missing MUX clocks from PLLs in CMU_TOP
clk: samsung: exynos7885: Update CLKS_NR_FSYS after bindings fix
dt-bindings: clock: exynos7885: Add indices for USB clocks
dt-bindings: clock: exynos7885: Add CMU_TOP PLL MUX indices
dt-bindings: clock: exynos7885: Fix duplicated binding
clk: samsung: exynos850: Add TMU clock
dt-bindings: clock: exynos850: Add TMU clock
* clk-rockchip:
dt-bindings: clock, reset: fix top-comment indentation rk3576 headers
clk: rockchip: remove unused mclk_pdm0_p/pdm0_p definitions
clk: rockchip: fix error for unknown clocks
clk: rockchip: rk3588: drop unused code
clk: rockchip: Add clock controller for the RK3576
clk: rockchip: Add new pll type pll_rk3588_ddr
dt-bindings: clock, reset: Add support for rk3576
dt-bindings: clock: rockchip,rk3588-cru: drop unneeded assigned-clocks
clk: rockchip: rk3588: Fix 32k clock name for pmu_24m_32k_100m_src_p
dt-bindings: clock: rockchip: remove CLK_NR_CLKS and CLKPMU_NR_CLKS
clk: rockchip: rk3399: Drop CLK_NR_CLKS CLKPMU_NR_CLKS usage
clk: rockchip: rk3368: Drop CLK_NR_CLKS usage
clk: rockchip: rk3328: Drop CLK_NR_CLKS usage
clk: rockchip: rk3308: Drop CLK_NR_CLKS usage
clk: rockchip: rk3288: Drop CLK_NR_CLKS usage
clk: rockchip: rk3228: Drop CLK_NR_CLKS usage
clk: rockchip: rk3036: Drop CLK_NR_CLKS usage
clk: rockchip: px30: Drop CLK_NR_CLKS CLKPMU_NR_CLKS usage
clk: rockchip: Set parent rate for DCLK_VOP clock on RK3228
* clk-qcom: (47 commits)
clk: qcom: videocc-sm8550: Use HW_CTRL_TRIGGER flag for video GDSC's
clk: qcom: dispcc-sm8250: use special function for Lucid 5LPE PLL
clk: qcom: dispcc-sm8250: use CLK_SET_RATE_PARENT for branch clocks
clk: qcom: ipq5332: Use icc-clk for enabling NoC related clocks
clk: qcom: ipq5332: Register gcc_qdss_tsctr_clk_src
dt-bindings: usb: qcom,dwc3: Update ipq5332 clock details
dt-bindings: interconnect: Add Qualcomm IPQ5332 support
clk: qcom: gcc-msm8998: Add Q6 BIMC and LPASS core, ADSP SMMU clocks
dt-bindings: clock: gcc-msm8998: Add Q6 and LPASS clocks definitions
clk: qcom: Fix SM_CAMCC_8150 dependencies
clk: qcom: gcc-sm8150: De-register gcc_cpuss_ahb_clk_src
clk: qcom: gcc-sc8180x: Fix the sdcc2 and sdcc4 clocks freq table
clk: qcom: gcc-sc8180x: Add GPLL9 support
dt-bindings: clock: qcom: Add GPLL9 support on gcc-sc8180x
clk: qcom: gcc-sc8180x: Register QUPv3 RCGs for DFS on sc8180x
clk: qcom: clk-rpmh: Fix overflow in BCM vote
dt-bindings: clock: qcom: Drop required-opps in required on SM8650 camcc
dt-bindings: clock: qcom: Drop required-opps in required on sm8650 videocc
dt-bindings: clock: qcom,qcs404-turingcc: convert to dtschema
dt-bindings: clock: Add x1e80100 LPASSCC reset controller
...
|
|
* clk-amlogic:
clk: meson: introduce symbol namespace for amlogic clocks
clk: meson: axg-audio: add sm1 earcrx clocks
clk: meson: axg-audio: setup regmap max_register based on the SoC
dt-bindings: clock: axg-audio: add earcrx clock ids
clk: meson: s4: pll: Constify struct regmap_config
clk: meson: s4: peripherals: Constify struct regmap_config
clk: meson: c3: pll: Constify struct regmap_config
clk: meson: c3: peripherals: Constify struct regmap_config
clk: meson: a1: pll: Constify struct regmap_config
clk: meson: a1: peripherals: Constify struct regmap_config
* clk-microchip:
clk: at91: sama7g5: Allocate only the needed amount of memory for PLLs
clk: at91: sam9x7: add sam9x7 pmc driver
dt-bindings: clock: at91: Allow PLLs to be exported and referenced in DT
clk: at91: sama7g5: move mux table macros to header file
clk: at91: sam9x7: add support for HW PLL freq dividers
clk: at91: clk-sam9x60-pll: re-factor to support individual core freq outputs
dt-bindings: clocks: atmel,at91rm9200-pmc: add sam9x7 clock controller
dt-bindings: clocks: atmel,at91sam9x5-sckc: add sam9x7
* clk-imx: (27 commits)
clk: imx6ul: fix clock parent for IMX6UL_CLK_ENETx_REF_SEL
clk: imx95: enable the clock of NETCMIX block control
dt-bindings: clock: add RMII clock selection
dt-bindings: clock: add i.MX95 NETCMIX block control
clk: imx: imx8: Use clk_hw pointer for self registered clock in clk_parent_data
clk: imx: composite-7ulp: Use NULL instead of 0
clk: imx: add missing MODULE_DESCRIPTION() macros
clk: imx: clk-imx8mp: Allow media_disp pixel clock reconfigure parent rate
clk: imx: fracn-gppll: update rate table
clk: imx: imx8qxp: Parent should be initialized earlier than the clock
clk: imx: imx8qxp: Register dc0_bypass0_clk before disp clk
clk: imx: imx8qxp: Add clock muxes for MIPI and PHY ref clocks
clk: imx: imx8qxp: Add LVDS bypass clocks
clk: imx: imx8mm: Change the 'nand_usdhc_bus' clock to non-critical one
clk: imx: imx8mn: add sai7_ipg_clk clock settings
clk: imx: add CLK_SET_RATE_PARENT for lcdif_pixel_src for i.MX7D
clk: imx: Remove CLK_SET_PARENT_GATE for DRAM mux for i.MX7D
clk: imx: imx8mp: fix clock tree update of TF-A managed clocks
clk: imx: fracn-gppll: fix fractional part of PLL getting lost
clk: imx: composite-7ulp: Check the PCC present bit
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT Bindings:
- Drop duplicate devices in trivial-devices.yaml
- Add a common serial peripheral device schema and reference it in
serial device schemas.
- Convert nxp,lpc1850-wdt, zii,rave-wdt, ti,davinci-wdt,
snps,archs-pct, fsl,bcsr, fsl,fpga-qixis-i2c, fsl,fpga-qixis,
fsl,cpm-enet, fsl,cpm-mdio, fsl,ucc-hdlc, maxim,ds26522,
aspeed,ast2400-cvic, aspeed,ast2400-vic, fsl,ftm-timer,
ti,davinci-timer, fsl,rcpm, and qcom,ebi2 to DT schema
- Add support for rockchip,rk3576-wdt, qcom,apss-wdt-sa8255p,
fsl,imx8qm-irqsteer, qcom,pm6150-vib, qcom,sa8255p-pdc,
isil,isl69260, ti,tps546d24, and lpc32xx DMA mux
- Drop duplicate nvidia,tegra186-ccplex-cluster.yaml and
mediatek,mt6795-sys-clock.yaml
- Add arm,gic ESPI and EPPI interrupt type specifiers
- Add another batch of legacy compatible strings which we have no
intention of documenting
- Add dmas/dma-names properties to FSL lcdif
- Fix wakeup-source reference to m8921-keypad.yaml
- Treewide fixes of typos in bindings
DT Core:
- Update dtc/libfdt to upstream version v1.7.0-95-gbcd02b523429
- More conversions to scoped iterators and __free() initializer
- Handle overflows in address resources on 32-bit systems
- Extend extracting compatible strings in sources from function
parameters
- Use of_property_present() in DT unittest
- Clean-up of_irq_to_resource() to use helpers
- Support #msi-cells=<0> in of_msi_get_domain()
- Improve the kerneldoc for of_property_match_string()
- kselftest: Ignore nodes that have ancestors disabled"
* tag 'devicetree-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (59 commits)
dt-bindings: watchdog: Add rockchip,rk3576-wdt compatible
dt-bindings: cpu: Drop duplicate nvidia,tegra186-ccplex-cluster.yaml
dt-bindings: clock: mediatek: Drop duplicate mediatek,mt6795-sys-clock.yaml
of/irq: Use helper to define resources
of/irq: Make use of irq_get_trigger_type()
dt-bindings: clk: vc5: Make SD/OE pin configuration properties not required
drivers/of: Improve documentation for match_string
of: property: Do some clean up with use of __free()
dt-bindings: watchdog: qcom-wdt: document support on SA8255p
dt-bindings: interrupt-controller: fsl,irqsteer: Document fsl,imx8qm-irqsteer
dt-bindings: interrupt-controller: arm,gic: add ESPI and EPPI specifiers
dt-bindings: dma: Add lpc32xx DMA mux binding
dt-bindings: trivial-devices: Drop duplicate "maxim,max1237"
dt-bindings: trivial-devices: Drop duplicate LM75 compatible devices
dt-bindings: trivial-devices: Deprecate "ad,ad7414"
dt-bindings: trivial-devices: Drop incorrect and duplicate at24 compatibles
dt-bindings: wakeup-source: update reference to m8921-keypad.yaml
dt-bindings: interrupt-controller: qcom-pdc: document support for SA8255p
dt-bindings: Fix various typos
of: address: Unify resource bounds overflow checking
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain updates from Ulf Hansson:
"pmdomain core:
- Add support for s2idle for CPU PM domains on PREEMPT_RT
- Add device managed version of dev_pm_domain_attach|detach_list()
- Improve layout of the debugfs summary table
pmdomain providers:
- amlogic: Remove obsolete vpu domain driver
- bcm: raspberrypi: Add support for devices used as wakeup-sources
- imx: Fixup clock handling for imx93 at driver remove
- rockchip: Add gating support for RK3576
- rockchip: Add support for RK3576 SoC
- Some OF parsing simplifications
- Some simplifications by using dev_err_probe() and guard()
pmdomain consumers:
- qcom/media/venus: Convert to the device managed APIs for PM domains
cpuidle-psci:
- Add support for s2idle/s2ram for the hierarchical topology on
PREEMPT_RT
- Some OF parsing simplifications"
* tag 'pmdomain-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (39 commits)
pmdomain: core: Reduce debug summary table width
pmdomain: core: Move mode_status_str()
pmdomain: core: Fix "managed by" alignment in debug summary
pmdomain: core: Harden inter-column space in debug summary
pmdomain: rockchip: Add gating masks for rk3576
pmdomain: rockchip: Add gating support
pmdomain: rockchip: Simplify dropping OF node reference
pmdomain: mediatek: make use of dev_err_cast_probe()
pmdomain: imx93-pd: drop the context variable "init_off"
pmdomain: imx93-pd: don't unprepare clocks on driver remove
pmdomain: imx93-pd: replace dev_err() with dev_err_probe()
pmdomain: qcom: rpmpd: Simplify locking with guard()
pmdomain: qcom: rpmhpd: Simplify locking with guard()
pmdomain: qcom: cpr: Simplify locking with guard()
pmdomain: qcom: cpr: Simplify with dev_err_probe()
pmdomain: imx: gpcv2: Simplify with scoped for each OF child loop
pmdomain: imx: gpc: Simplify with scoped for each OF child loop
pmdomain: rockchip: SimplUlf Hanssonify locking with guard()
pmdomain: rockchip: Simplify with scoped for each OF child loop
pmdomain: qcom-cpr: Use scope based of_node_put() to simplify code.
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"The driver updates seem larger this time around, with changes is many
of the SoC specific drivers, both the custom drivers/soc ones and the
closely related subsystems (memory, bus, firmware, reset, ...).
The at91 platform gains support for sam9x7 chips in the soc and power
management code. This is the latest variant of one of the oldest still
supported SoC families, using the ARM9 (ARMv5) core.
As usual, the qualcomm snapdragon platform gets a ton of updates in
many of their drivers to add more features and additional SoC support.
Most of these are somewhat firmware related as the platform has a
number of firmware based interfaces to the kernel. A notable addition
here is the inclusion of trace events to two of these drivers.
Herve Codina and Christophe Leroy are now sending updates for
drivers/soc/fsl/ code through the SoC tree, this contains both PowerPC
and Arm specific platforms and has previously been problematic to
maintain. The first update here contains support for newer PowerPC
variants and some cleanups.
The turris mox firmware driver has a number of updates, mostly
cleanups.
The Arm SCMI firmware driver gets a major rework to modularize the
existing code into separately loadable drivers for the various
transports, the addition of custom NXP i.MX9 interfaces and a number
of smaller updates.
The Arm FF-A firmware driver gets a feature update to support the v1.2
version of the specification.
The reset controller drivers have some smaller cleanups and a newly
added driver for the Intel/Mobileye EyeQ5/EyeQ6 MIPS SoCs.
The memory controller drivers get some cleanups and refactoring for
Tegra, TI, Freescale/NXP and a couple more platforms.
Finally there are lots of minor updates to firmware (raspberry pi,
tegra, imx), bus (sunxi, omap, tegra) and soc (rockchips, tegra,
amlogic, mediatek) drivers and their DT bindings"
* tag 'soc-drivers-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (212 commits)
firmware: imx: remove duplicate scmi_imx_misc_ctrl_get()
platform: cznic: turris-omnia-mcu: Fix error check in omnia_mcu_register_trng()
bus: sunxi-rsb: Simplify code with dev_err_probe()
soc: fsl: qe: ucc: Export ucc_mux_set_grant_tsa_bkpt
soc: fsl: cpm1: qmc: Fix dependency on fsl_soc.h
dt-bindings: arm: rockchip: Add rk3576 compatible string to pmu.yaml
soc: fsl: qbman: Remove redundant warnings
soc: fsl: qbman: Use iommu_paging_domain_alloc()
MAINTAINERS: Add QE files related to the Freescale QMC controller
soc: fsl: cpm1: qmc: Handle QUICC Engine (QE) soft-qmc firmware
soc: fsl: cpm1: qmc: Add support for QUICC Engine (QE) implementation
soc: fsl: qe: Add missing PUSHSCHED command
soc: fsl: qe: Add resource-managed muram allocators
soc: fsl: cpm1: qmc: Introduce qmc_version
soc: fsl: cpm1: qmc: Rename SCC_GSMRL_MODE_QMC
soc: fsl: cpm1: qmc: Handle RPACK initialization
soc: fsl: cpm1: qmc: Rename qmc_chan_command()
soc: fsl: cpm1: qmc: Introduce qmc_{init,exit}_xcc() and their CPM1 version
soc: fsl: cpm1: qmc: Introduce qmc_init_resource() and its CPM1 version
soc: fsl: cpm1: qmc: Re-order probe() operations
...
|
|
Extended SPI and extended PPI interrupts are in the range [0-1023] and
[0-127] respectively, supported by GICv3.1.
Qualcomm SA8255p platform uses extended SPI for SCMI 'a2p' doorbells.
Signed-off-by: Nikunj Kela <quic_nkela@quicinc.com>
Link: https://lore.kernel.org/r/20240910162637.2382656-1-quic_nkela@quicinc.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Add device tree bindings for the Cirrus Logic EP93xx SoC.
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Tested-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Block comments should align the * on each line, as checkpatch rightfully
pointed out, so fix that style issue on the newly added rk3576 headers.
Fixes: 49c04453db81 ("dt-bindings: clock, reset: Add support for rk3576")
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20240909223149.85364-1-heiko@sntech.de
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next
Georgi writes:
interconnect changes for 6.12
This pull request contains the interconnect changes for the 6.12-rc1 merge
window. It contains new drivers and fixes with the following highlights:
Driver changes:
- New driver for MSM8976 platforms
- New driver for MSM8937 platforms
- Enable sync_state for SM8250 platforms
- Enable QoS support for QCS404
- Add ab_coeff bandwidth adjustments for MSM8953
- Drop the unsupported yet DISP nodes on SM8350 platforms
- Fix missed num_nodes initialization in icc-clk driver
- Misc DT and documentation fixes
Signed-off-by: Georgi Djakov <djakov@kernel.org>
* tag 'icc-6.12-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
dt-bindings: interconnect: qcom: Do not require reg for sc8180x virt NoCs
dt-bindings: interconnect: qcom-bwmon: Document SA8775p bwmon compatibles
dt-bindings: interconnect: qcom: msm8953: Fix 'See also' in description
interconnect: qcom: msm8953: Add ab_coeff
dt-bindings: interconnect: qcom: msm8939: Fix example
interconnect: qcom: qcs404: Add regmaps and more bus descriptions
interconnect: qcom: qcs404: Mark AP-owned nodes as such
interconnect: qcom: Add MSM8937 interconnect provider driver
interconnect: qcom: sm8250: Enable sync_state
dt-bindings: interconnect: qcom,sm8350: drop DISP nodes
interconnect: qcom: sm8350: drop DISP nodes
dt-bindings: interconnect: qcom: Add Qualcomm MSM8937 NoC
interconnect: qcom: Add MSM8976 interconnect provider driver
dt-bindings: interconnect: qcom: Add Qualcomm MSM8976 NoC
interconnect: icc-clk: Add missed num_nodes initialization
dt-bindings: interconnect: qcom,rpmh: correct sm8150 camnoc
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v6.12
Support is added for making SCM driver configure the system either for a
full or minimal ramdump following a system crash. The ramdump mode is
changed from being enable-only to enable/disable as requested.
The QSEECOM uefisecapp interface is allow-listed on Surface Laptop 7 and
Lenovo Thinkpad T14s, providing EFI variable access.
The change to match the SMD RPM driver based on the SMD channel name is
reverted, in favor of stepping back to OF-based matching, as a means to
get module autoloading to work properly.
AOSS, APR, ICE, OCMEM, PBS and SMP2P drivers has error handling cleaned
up using scoped resources.
Trace events are added to the BWMON and SMP2P drivers, for better
insights into their operations.
The X1E LLCC configuration data is updated based on recommended values.
A number of platforms are added to the in-kernel PD-mapper.
SocInfo driver is extended with IDs from SM7325, QCS8275 and QCS8300
families.
* tag 'qcom-drivers-for-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (33 commits)
firmware: qcom: scm: Allow QSEECOM on Surface Laptop 7 models
dt-bindings: soc: qcom: qcom,pmic-glink: Document SM7325 compatible
soc: qcom: pd_mapper: Add SM7325 compatible
soc: qcom: socinfo: Add Soc IDs for SM7325 family
dt-bindings: arm: qcom,ids: Add IDs for SM7325 family
soc: qcom: socinfo: add QCS8275/QCS8300 SoC ID
dt-bindings: arm: qcom,ids: add SoC ID for QCS8275/QCS8300
soc: qcom: smp2p: use scoped device node handling to simplify error paths
soc: qcom: pbs: use scoped device node handling to simplify error paths
soc: qcom: ocmem: use scoped device node handling to simplify error paths
soc: qcom: ice: use scoped device node handling to simplify error paths
soc: qcom: aoss: simplify with scoped for each OF child loop
soc: qcom: apr: simplify with scoped for each OF child loop
soc: qcom: smd-rpm: add qcom,smd-rpm compatible
dt-bindings: soc: qcom: smd-rpm: add generic compatibles
Revert "soc: qcom: smd-rpm: Match rpmsg channel instead of compatible"
firmware: qcom: scm: Add multiple download mode support
firmware: qcom: scm: Refactor code to support multiple dload mode
soc: qcom: pd_mapper: Add more older platforms without domains
soc: qcom: pd_mapper: Add X1E80100
...
Link: https://lore.kernel.org/r/20240904193042.15118-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm Arm64 DeviceTree updates for v6.12
This introduces support for the following devices:
- Lenovo Thinkpad T14s Gen 6
- Microsoft Surface Laptop 7 laptop
- Lenovo A6000
- Lenovo A6010
- Samsung Galaxy J3,
- Lenovo Vibe K5 (multiple variants)
- LG G4
IPQ5332 global clock controller is marked as an interconnect-provider,
and the USB interrupt triggers are corrected.
Touchscreen description is added to the Samsung Galaxy Core Prime and
Max, and touch keys are added to the Samsung Galaxy Grand Prime and
Galaxy Tab A.
Camera flash is added to BQ Aquaris M5 and X5.
The SD-card slot is described for the QCM6490 IDP.
For SA8775P CPU and LLCC bwmon is added, audio, compute and general
purpose DSP remoteprocs are added, with FastRPC on audio and compute
DSP. CPUidle states, capacity and DPC properties are added.
On SC8180X definitions for the multiport USB controller is introduced,
and enabled on the Lenovo Flex 5G to bring the camera to life. Power key
definitions are added as well.
The RGB camera sensor on the Lenovo ThinkPad X13s is described. PCIe
pinconf properties are cleaned up on this and the CRD. The four USB
Type-A ports found on the SA8295P ADP are enabled.
The modem subsystem remoteproc is introduced on the SDX75 and enabled on
the IDP device.
Camera, display and GPU clock controllers are added for the SM4450
platform.
On the F(x)tec Pro1X device, display, GPU, WiFi, RGB LED, SD-card,
remoteprocs, USB3 SuperSpeed, touchscreen, IO-expander, hall switch,
caps lock LED and camera button are introduced.
The camera clock controller is added to SM8150, and the GPU-only
"amd,imageon" compatible is dropped from the MTP device.
Refgen regulator for the DSI nodes of SM8350 is described, and the
display subsystem interconnect paths are corrected.
The camera control interface controllers are described on both SM8550
and SM8650. The bluetooth node on on SM8550 QRD, SM8650 QRD and SM8650
HDK are transitioned to the power sequence description. WiFi is added to
the SM8550 hardware development kit (HDK).
On the X1 Elite platform, one more UART, a DisplayPort PHY, the USB
multiport controller, a PCIe controller and PHY are added. Orientation
switching is wired up for the USB+DP PHYs. RPMh statistics node is
added. For the X1 Elite CRD the LID switch and the SDX65 modems are
introduced.
* tag 'qcom-arm64-for-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (120 commits)
arm64: dts: qcom: x1e80100: Fix PHY for DP2
arm64: dts: qcom: qcm6490-idp: Add SD Card node
arm64: dts: qcom: x1e80100: Add orientation-switch to all USB+DP QMP PHYs
arm64: dts: qcom: Add X1E78100 ThinkPad T14s Gen 6
dt-bindings: arm: qcom: Add Lenovo ThinkPad T14s Gen 6
Revert "arm64: dts: qcom: msm8939-longcheer-l9100: Add rear flash"
arm64: dts: qcom: Add support for X1-based Surface Laptop 7 devices
arm64: dts: qcom: x1e80100: Add UART2
arm64: dts: qcom: x1e80100-pmics: Add PMC8380C PWM
dt-bindings: arm: qcom: Add Surface Laptop 7 devices
arm64: dts: qcom: sm8150-mtp: drop incorrect amd,imageon
arm64: qcom: sa8775p: Add ADSP and CDSP0 fastrpc nodes
arm64: dts: qcom: x1e80100: Add USB Multiport controller
arm64: dts: qcom: sa8775p: fix the fastrpc label
arm64: dts: qcom: ipq5332: Add icc provider ability to gcc
dt-bindings: interconnect: Add Qualcomm IPQ5332 support
arm64: dts: qcom: sm8250: move lpass codec macros to use clks directly
arm64: dts: qcom: msm8998: Add disabled support for LPASS iommu for Q6
dt-bindings: clock: gcc-msm8998: Add Q6 and LPASS clocks definitions
arm64: dts: qcom: msm8976: Add restart node
...
Link: https://lore.kernel.org/r/20240904215752.24465-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.12 (take two)
- Add support for Ethernet TSN and PCIe on the R-Car V4H SoC and the
White-Hawk (Single) development board,
- Add display support for the RZ/G2UL SoC and the RZ/G2UL SMARC EVk
board,
- Add I2C support for the RZ/G3S SoC and the RZ/G3S SMARC EVK board,
- Add support for HDMI audio on the RZ/G2L and RZ/G2LC SMARC EVK
boards,
- Add initial support for the RZ/V2H(P) (R9A09G057) SoC and the RZ/V2H
EVK board,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.12-tag2' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (34 commits)
arm64: dts: renesas: r8a779h0: Add family fallback for CSISP IP
arm64: dts: renesas: r8a779a0: Add family fallback for CSISP IP
arm64: dts: renesas: r8a779g0: Add family fallback for CSISP IP
arm64: dts: renesas: r8a779h0: Add family fallback for VIN IP
arm64: dts: renesas: r8a779a0: Add family fallback for VIN IP
arm64: dts: renesas: r8a779g0: Add family fallback for VIN IP
arm64: dts: renesas: r9a09g057h44-rzv2h-evk: Enable watchdog
arm64: dts: renesas: r9a09g057h44-rzv2h-evk: Enable OSTM, I2C, and SDHI
arm64: dts: renesas: r9a09g057: Add WDT0-WDT3 nodes
arm64: dts: renesas: r9a09g057: Add SDHI0-SDHI2 nodes
arm64: dts: renesas: r9a09g057: Add RIIC0-RIIC8 nodes
arm64: dts: renesas: r9a09g057: Add OSTM0-OSTM7 nodes
arm64: dts: renesas: Add initial DTS for RZ/V2H EVK board
arm64: dts: renesas: Add initial SoC DTSI for RZ/V2H(P) SoC
dt-bindings: soc: renesas: Document RZ/V2H EVK board
dt-bindings: clock: renesas: Document RZ/V2H(P) SoC CPG
arm64: dts: renesas: r9a07g043u11-smarc: Enable DU
arm64: dts: renesas: rzg2lc-smarc: Enable HDMI audio
arm64: dts: renesas: rzg2l-smarc: Enable HDMI audio
arm64: dts: renesas: r9a07g043u: Add DU node
...
Link: https://lore.kernel.org/r/cover.1725374275.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add support for the time slot assigner (TSA) available in some
PowerQUICC SoC that uses a QUICC Engine (QE) block such as MPC8321.
This QE TSA is similar to the CPM TSA except that it uses UCCs (Unified
Communication Controllers) instead of SCCs (Serial Communication
Controllers). Also, compared against the CPM TSA, this QE TSA can handle
up to 4 TDMs instead of 2 and allows to configure the logic level of
sync signals.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-8-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
|
|
Document the device tree bindings for the Renesas RZ/V2H(P) SoC
Clock Pulse Generator (CPG).
CPG block handles the below operations:
- Generation and control of clock signals for the IP modules
- Generation and control of resets
- Control over booting
- Low power consumption and power supply domains
Also define constants for the core clocks of the RZ/V2H(P) SoC. Note the
core clocks are a subset of the ones which are listed as part of section
4.4.2 of HW manual Rev.1.01 which cannot be controlled by CLKON register.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20240729202645.263525-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add clock and reset ID defines for rk3576.
Compared to the downstream bindings written by Elaine, this uses
continous gapless IDs starting at 0. Thus all numbers are
different between downstream and upstream, but names are kept
exactly the same.
Also add documentation for the rk3576 CRU core.
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/0102019199a76766-f3a2b53f-d063-458b-b0d1-dfbc2ea1893c-000000@eu-west-1.amazonses.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add RMII clock selection for ENETC0 and ENETC1.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240829011849.364987-3-wei.fang@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
|
|
CLK_NR_CLKS and CLKPMU_NR_CLKS should not be part of the binding.
Remove since the kernel code no longer uses it.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/a3292ed0-3489-4887-8567-40ea4983c592@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add pinctrl support for Sophgo CV1800 series SoC.
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/IA1PR20MB4953680DE7977CAD906DBDB4BBB32@IA1PR20MB4953.namprd20.prod.outlook.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
A set of fixes that target stability of the SM8350 platform.
* icc-sm8350
interconnect: qcom: sm8350: drop DISP nodes
dt-bindings: interconnect: qcom,sm8350: drop DISP nodes
interconnect: qcom: sm8250: Enable sync_state
Link: https://lore.kernel.org/r/20240804-sm8350-fixes-v1-0-1149dd8399fe@linaro.org/
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Vendor msm-5.x kernels declared duplicate indices for some of display
nodes to be used by separate display RSC and BCM voters. As it is not
clear how this separate BCM should be modelled upstream and the device
trees do not use these indices, drop them for now.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240804-sm8350-fixes-v1-6-1149dd8399fe@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Add bindings for Qualcomm MSM8937 Network-On-Chip interconnect devices.
Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240709102728.15349-4-a39.skl@gmail.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Add bindings for Qualcomm MSM8976 Network-On-Chip interconnect devices.
Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240709102728.15349-2-a39.skl@gmail.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Add dt-schema for ExynosAuto v920 SoC clock controller.
Add device tree clock binding definitions for below CMU blocks.
- CMU_TOP
- CMU_PERIC0/1
- CMU_MISC
- CMU_HSI0/1
Signed-off-by: Sunyeal Hong <sunyeal.hong@samsung.com>
Link: https://lore.kernel.org/r/20240821232652.1077701-2-sunyeal.hong@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Define power domain IDs as described in the TRM and add compatible for
rockchip,rk3576-power-controller
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
Co-Developed-by: Detlev Casanova <detlev.casanova@collabora.com>
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240814222824.3170-2-detlev.casanova@collabora.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
arm64-for-6.12
Merge IPQ5332 interconnect binding from the topic branch, to gain access
to the interconnect path defines.
|
|
clk-for-6.12
Merge IPQ5332 interconnect binding additions through topic branchs to
allow making the constants available in DeviceTree branch as well.
|
|
Add interconnect-cells to clock provider so that it can be
used as icc provider.
Add master/slave ids for Qualcomm IPQ5332 Network-On-Chip
interfaces. This will be used by the gcc-ipq5332 driver
for providing interconnect services using the icc-clk
framework.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Link: https://lore.kernel.org/r/20240730054817.1915652-2-quic_varada@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Merge MSM8998 GCC binding update, to get access to the newly introduced
LPASS clock and GDSC constants.
|
|
Merge updates to MSM8998 GCC binding include file through topic branch,
to make available the newly added constants to both clock and DeviceTree
branch.
|
|
Add definitions for the Q6 BIMC, LPASS core and adsp smmu clocks,
required to enable audio functionality on MSM8998.
Add the GDSC definitions for the LPASS_ADSP_GDSC and LPASS_CORE_GDSC
as a final step to enable the required clock tree for the lpass iommu
and for the audio dsp itself.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Marc Gonzalez <mgonzalez@freebox.fr>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240814-lpass-v1-1-a5bb8f9dfa8b@freebox.fr
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add Qualcomm SM7325/SM7325P (yupik) SoC IDs.
Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240808184048.63030-2-danila@jiaxyga.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add the missing GPLL9 which is required for the gcc sdcc2 clock.
Fixes: 0fadcdfdcf57 ("dt-bindings: clock: Add SC8180x GCC binding")
Cc: stable@vger.kernel.org
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
Link: https://lore.kernel.org/r/20240812-gcc-sc8180x-fixes-v2-2-8b3eaa5fb856@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add the ID for Qualcomm QCS8275/QCS8300 SoC.
Signed-off-by: Jingyi Wang <quic_jingyw@quicinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240814072806.4107079-3-quic_jingyw@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add GPDSP0 and GPDSP1 clients for SA8775p platform.
Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20240805-topic-sa8775p-iot-remoteproc-v4-2-86affdc72c04@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
arm64-for-6.12
Merge the SM4450 display, camera and GPU bindings from a topic branch,
to gain access to the clock defines.
|
|
clk-for-6.12
Merge the SM4450 display, camera and GPU bindings through a topic
branch, to make it possible to merge them into the DeviceTree source
branch as well.
|
|
Add device tree bindings for the graphics clock controller on
Qualcomm SM4450 platform.
Signed-off-by: Ajit Pandey <quic_ajipan@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240611133752.2192401-7-quic_ajipan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add device tree bindings for the camera clock controller on
Qualcomm SM4450 platform.
Signed-off-by: Ajit Pandey <quic_ajipan@quicinc.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240611133752.2192401-5-quic_ajipan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add device tree bindings for the display clock controller on
Qualcomm SM4450 platform.
Signed-off-by: Ajit Pandey <quic_ajipan@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240611133752.2192401-3-quic_ajipan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add dpum clock definitions and compatibles.
Also used clock name 'bus' instead of full clock name
dout_clkcmu_dpum_bus like other board cmu schema (GS101).
Signed-off-by: Kwanghoon Son <k.son@samsung.com>
Link: https://lore.kernel.org/r/20240809-clk_dpum-v3-1-359decc30fe2@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Exynos7885 SoC has a DWC3 USB Controller with Exynos USB PHY which in
theory supports USB3 SuperSpeed, but is only used as USB2 in all known
devices.
These, of course, need some clocks.
Add indices for these clocks.
Signed-off-by: David Virag <virag.david003@gmail.com>
Link: https://lore.kernel.org/r/20240806121157.479212-4-virag.david003@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Add indices for missing MUX clocks from PLLs in CMU_TOP.
Signed-off-by: David Virag <virag.david003@gmail.com>
Link: https://lore.kernel.org/r/20240806121157.479212-3-virag.david003@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
The numbering in Exynos7885's FSYS CMU bindings has 4 duplicated by
accident, with the rest of the bindings continuing with 5.
Fix this by moving CLK_MOUT_FSYS_USB30DRD_USER to the end as 11.
Since CLK_MOUT_FSYS_USB30DRD_USER is not used in any device tree as of
now, and there are no other clocks affected (maybe apart from
CLK_MOUT_FSYS_MMC_SDIO_USER which the number was shared with, also not
used in a device tree), this is the least impactful way to solve this
problem.
Fixes: cd268e309c29 ("dt-bindings: clock: Add bindings for Exynos7885 CMU_FSYS")
Cc: stable@vger.kernel.org
Signed-off-by: David Virag <virag.david003@gmail.com>
Link: https://lore.kernel.org/r/20240806121157.479212-2-virag.david003@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Allow PLLADIV2 and LVDSPLL to be referenced as a PMC_TYPE_CORE
clock from phandle in DT for sam9x7 SoC family.
Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Link: https://lore.kernel.org/r/20240729070803.1990916-1-varshini.rajendran@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
Add device tree bindings for AD4695 and similar ADCs.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20240711-iio-adc-ad4695-v4-0-c31621113b57@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Document the device tree bindings for the Renesas RZ/V2H(P) SoC
Clock Pulse Generator (CPG).
CPG block handles the below operations:
- Generation and control of clock signals for the IP modules
- Generation and control of resets
- Control over booting
- Low power consumption and power supply domains
Also define constants for the core clocks of the RZ/V2H(P) SoC. Note the
core clocks are a subset of the ones which are listed as part of section
4.4.2 of HW manual Rev.1.01 which cannot be controlled by CLKON register.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20240729202645.263525-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|