summaryrefslogtreecommitdiff
path: root/include/dt-bindings/clock
AgeCommit message (Collapse)AuthorFilesLines
2018-07-06dts: clk: add devicetree bindings for MAX9485Daniel Mack1-0/+18
This patch adds the devicetree bindings for MAX9485, a programmable audio clock generator. Signed-off-by: Daniel Mack <daniel@zonque.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-07-03clk: rockchip: add dt-binding header for px30Elaine Zhang1-0/+389
Add the dt-bindings header for the px30, that gets shared between the clock controller and the clock references in the dts. Add softreset ID for px30. Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-07-03clk: qcom: Enable clocks which needs to be always on for SDM845Amit Nischal1-0/+2
There are certain clocks which needs to be always enabled for system operation. Add support for the same by adding 'CLK_IS_CRITICAL' flag for such clocks. Signed-off-by: Amit Nischal <anischal@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-07-03clk: meson-axg: add pcie and mipi clock bindingsYixun Lan1-0/+3
Add the pcie and mipi clock dt-bindings for the pcie driver. Since the mipi clock isalso used by the pcie driver, we add it together in this patch. Tested-by: Jianxin Qin <jianxin.qin@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-06-29clk: imx6ul: add GPIO clock gatesAnson Huang1-1/+7
i.MX6UL has GPIO clock gates in CCM CCGR, add them into clock tree for clock management. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-06-29dt-bindings: clock: imx6ul: Do not change the clock definition orderFabio Estevam1-21/+19
Commit f5a4670de966 ("clk: imx: Add new clo01 and clo2 controlled by CCOSR") introduced the CLK_CLKO definitions, but didn't put them at the end of the list, which may cause dtb breakage when running an old dtb with a newer kernel. In order to avoid that, simply add the new CLK_CKO clock definitions at the end of the list. Fixes: f5a4670de966 ("clk: imx: Add new clo01 and clo2 controlled by CCOSR") Reported-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-06-28Merge tag 'drm-misc-next-2018-06-27' of ↵Dave Airlie1-0/+11
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 4.19: Cross-subsystem Changes: devicetree documentation dt-bindings defintions for sun8i (Jernej Skrabec) Core Changes: Consider drivers setting DRIVER_ATOMIC as atomic (Eric Anholt) Improvements for in-kernel clients (Noralf Trønnes) Export and rename drm_crtc_port_mask() (Jernej Skrabec) Driver Changes: v3d: Add looking for GPU scheduler jobs management (Eric Anholt) Add Ilitek ILI9881c panel driver(Maxime Ripard) rockchip: vop: fixup linebuffer mode calc error (Sandy Huang) tinydrm: new driver for ILI9341 display panels (David Lechner) sun4i: Add TCON TOP driver (Jernej Skrabec) Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180628010018.GA10929@juma
2018-06-27dt-bindings: display: sunxi-drm: Add TCON TOP descriptionJernej Skrabec1-0/+11
TCON TOP main purpose is to configure whole display pipeline. It determines relationships between mixers and TCONs, selects source TCON for HDMI, muxes LCD and TV encoder GPIO output, selects TV encoder clock source and contains additional TV TCON and DSI gates. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180625120304.7543-5-jernej.skrabec@siol.net
2018-06-27clk: sunxi-ng: r40: Export video PLLsJernej Skrabec1-0/+4
Video PLLs need to be referenced in R40 DT as possible HDMI PHY parent. Export them. Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-06-22dt-bindings: clock: Add the r9a06g032-sysctrl.h fileMichel Pollet1-0/+148
This adds the constants necessary to use the renesas,r9a06g032-sysctrl node. Signed-off-by: Michel Pollet <michel.pollet@bp.renesas.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-06-22dt-bindings: clock: add meson axg audio clock controller bindingsJerome Brunet1-0/+94
Export the clock ids dt-bindings usable by the consumers of the clock controller and add the documentation for the device tree bindings of the audio clock controller of the A113 based SoCs. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-06-04Merge branches 'clk-davinci-psc-da830', 'clk-renesas', 'clk-at91-recalc', ↵Stephen Boyd5-0/+127
'clk-davinci' and 'clk-meson' into clk-next * clk-davinci-psc-da830: clk: davinci: psc-da830: fix USB0 48MHz PHY clock registration * clk-renesas: clk: renesas: cpg-mssr: Add support for R-Car E3 clk: renesas: Add r8a77990 CPG Core Clock Definitions clk: renesas: rcar-gen2: Centralize quirks handling clk: renesas: r8a77980: Correct parent clock of PCIEC0 clk: renesas: r8a7794: Fix LB clock divider clk: renesas: r8a7792: Fix LB clock divider clk: renesas: r8a7791/r8a7793: Fix LB clock divider clk: renesas: r8a7745: Fix LB clock divider clk: renesas: r8a7743: Fix LB clock divider clk: renesas: cpg-mssr: Add r8a77470 support clk: renesas: Add r8a77470 CPG Core Clock Definitions clk: renesas: r8a77965: Add MSIOF controller clocks * clk-at91-recalc: clk: at91: PLL recalc_rate() now using cached MUL and DIV values * clk-davinci: clk: davinci: Fix link errors when not all SoCs are enabled clk: davinci: psc: allow for dev == NULL clk: davinci: da850-pll: change PLL0 to CLK_OF_DECLARE clk: davinci: pll: allow dev == NULL clk: davinci: psc-dm365: fix few clocks clk: davinci: pll-dm646x: keep PLL2 SYSCLK1 always enabled clk: davinci: psc-dm355: fix ASP0/1 clkdev lookups clk: davinci: pll-dm355: fix SYSCLKn parent names clk: davinci: pll-dm355: drop pll2_sysclk2 * clk-meson: clk: meson: axg: let mpll clocks round closest clk: meson: mpll: add round closest support clk: meson: meson8b: mark fclk_div2 gate clocks as CLK_IS_CRITICAL clk: meson: use SPDX license identifiers consistently clk: meson: drop CLK_SET_RATE_PARENT flag clk: meson-axg: Add AO Clock and Reset controller driver clk: meson: aoclk: refactor common code into dedicated file clk: meson: migrate to devm_of_clk_add_hw_provider API clk: meson: gxbb: add the video decoder clocks clk: meson: meson8b: add support for the NAND clocks dt-bindings: clock: reset: Add AXG AO Clock and Reset Bindings dt-bindings: clock: axg-aoclkc: New binding for Meson-AXG SoC clk: meson: gxbb: expose VDEC_1 and VDEC_HEVC clocks dt-bindings: clock: meson8b: export the NAND clock
2018-06-04Merge branch 'clk-qcom-sdm845' into clk-nextStephen Boyd2-0/+274
* clk-qcom-sdm845: clk: qcom: Export clk_fabia_pll_configure() clk: qcom: Add video clock controller driver for SDM845 dt-bindings: clock: Introduce QCOM Video clock bindings clk: qcom: Add Global Clock controller (GCC) driver for SDM845 clk: qcom: Add DT bindings for SDM845 gcc clock controller clk: qcom: Configure the RCGs to a safe source as needed clk: qcom: Add support for BRANCH_HALT_SKIP flag for branch clocks clk: qcom: Simplify gdsc status checking logic clk: qcom: gdsc: Add support to poll CFG register to check GDSC state clk: qcom: gdsc: Add support to poll for higher timeout value clk: qcom: gdsc: Add support to reset AON and block reset logic clk: qcom: Add support for controlling Fabia PLL clk: qcom: Clear hardware clock control bit of RCG Also fixup the Kconfig mess where SDM845 GCC has msm8998 in the description and also the video Kconfig says things slightly differently from the GCC one so just make it the same.
2018-06-04Merge branches 'clk-match-string', 'clk-ingenic', 'clk-si544-round-fix' and ↵Stephen Boyd1-7/+17
'clk-bcm-stingray' into clk-next * clk-match-string: clk: use match_string() helper clk: bcm2835: use match_string() helper * clk-ingenic: clk: ingenic: jz4770: Add 150us delay after enabling VPU clock clk: ingenic: jz4770: Enable power of AHB1 bus after ungating VPU clock clk: ingenic: jz4770: Modify C1CLK clock to disable CPU clock stop on idle clk: ingenic: jz4770: Change OTG from custom to standard gated clock clk: ingenic: Support specifying "wait for clock stable" delay clk: ingenic: Add support for clocks whose gate bit is inverted * clk-si544-round-fix: clk-si544: Properly round requested frequency to nearest match * clk-bcm-stingray: clk: bcm: Update and add Stingray clock entries dt-bindings: clk: Update Stingray binding doc
2018-06-04Merge branches 'clk-imx7d', 'clk-hisi-stub', 'clk-mvebu', 'clk-imx6-epit' ↵Stephen Boyd1-1/+3
and 'clk-debugfs-simple' into clk-next * clk-imx7d: clk: imx7d: reset parent for mipi csi root clk: imx7d: fix mipi dphy div parent * clk-hisi-stub: clk/driver/hisi: Consolidate the Kconfig for the CLOCK_STUB * clk-mvebu: clk: mvebu: use correct bit for 98DX3236 NAND * clk-imx6-epit: clk: imx6: add EPIT clock support * clk-debugfs-simple: clk: Return void from debug_init op clk: remove clk_debugfs_add_file() clk: tegra: no need to check return value of debugfs_create functions clk: davinci: no need to check return value of debugfs_create functions clk: bcm2835: no need to check return value of debugfs_create functions clk: no need to check return value of debugfs_create functions
2018-06-04Merge branches 'clk-imx6sx', 'clk-imx7d-enet' and 'clk-aspeed-24' into clk-nextStephen Boyd3-3/+8
* clk-imx6sx: clk: imx6sl: correct ocram_podf clock type clk: imx6sx: disable unnecessary clocks during clock initialization clk: imx6sx: add missing lvds2 clock to the clock tree * clk-imx7d-enet: ARM: dts: imx7: correct enet ipg clock clk: imx7d: correct enet clock CCGR registers clk: imx7d: correct enet phy ref clock gates * clk-aspeed-24: clk: aspeed: Add 24MHz fixed clock
2018-06-04Merge branches 'clk-allwinner', 'clk-rockchip', 'clk-tegra', 'clk-berlin' ↵Stephen Boyd1-0/+24
and 'clk-qcom-mmagic' into clk-next * clk-allwinner: clk: sunxi-ng: r40: export a regmap to access the GMAC register clk: sunxi-ng: r40: rewrite init code to a platform driver clk: sunxi-ng: add support for H6 PRCM CCU * clk-rockchip: clk: rockchip: remove deprecated gate-clk code and dt-binding clk: rockchip: use match_string() helper * clk-tegra: clk: tegra: Add quirk for getting CDEV1/2 clocks on Tegra20 clk: tegra20: Correct parents of CDEV1/2 clocks clk: tegra20: Add DEV1/DEV2 OSC dividers * clk-berlin: clk: berlin: switch to SPDX license identifier * clk-qcom-mmagic: clk: qcom: mmcc-msm8996: leave all mmagic gdscs and clocks always enabled clk: qcom: Register the gdscs before the clocks clk: qcom: gdsc: Add support for ALWAYS_ON gdscs
2018-06-04Merge branches 'clk-hisi-usb', 'clk-silent-bulk', 'clk-mtk-hdmi', ↵Stephen Boyd3-21/+40
'clk-mtk-mali' and 'clk-imx6ul-ccosr' into clk-next * clk-hisi-usb: clk: hisilicon: add missing usb3 clocks for Hi3798CV200 SoC * clk-silent-bulk: clk: bulk: silently error out on EPROBE_DEFER * clk-mtk-hdmi: clk: mediatek: correct the clocks for MT2701 HDMI PHY module * clk-mtk-mali: clk: mediatek: add g3dsys support for MT2701 and MT7623 dt-bindings: reset: mediatek: add entry for Mali-450 node to refer dt-bindings: clock: mediatek: add entry for Mali-450 node to refer dt-bindings: clock: mediatek: add g3dsys bindings * clk-imx6ul-ccosr: clk: imx: Add new clo01 and clo2 controlled by CCOSR
2018-06-04Merge branches 'clk-stm32mp1', 'clk-samsung', 'clk-uniphier-mpeg', ↵Stephen Boyd2-3/+4
'clk-stratix10' and 'clk-aspeed' into clk-next * clk-stm32mp1: clk: stm32mp1: Fix a memory leak in 'clk_stm32_register_gate_ops()' clk: stm32mp1: Add CLK_IGNORE_UNUSED to ck_sys_dbg clock clk: stm32mp1: remove ck_apb_dbg clock clk: stm32mp1: set stgen_k clock as critical clk: stm32mp1: add missing tzc2 clock clk: stm32mp1: fix SAI3 & SAI4 clocks clk: stm32mp1: remove unused dfsdm_src[] const clk: stm32mp1: add missing static * clk-samsung: clk: samsung: simplify getting .drvdata * clk-uniphier-mpeg: clk: uniphier: add LD11/LD20 stream demux system clock * clk-stratix10: clk: socfpga: stratix10: suppress unbinding platform's clock driver clk: socfpga: stratix10: use platform driver APIs * clk-aspeed: clk:aspeed: Fix reset bits for PCI/VGA and PECI clk: aspeed: Support second reset register
2018-06-04Merge branches 'clk-qcom-rpmh', 'clk-npcm7xx', 'clk-of-parent-count' and ↵Stephen Boyd2-0/+66
'clk-qcom-rcg-fix' into clk-next * clk-qcom-rpmh: dt-bindings: clock: Introduce QCOM RPMh clock bindings * clk-npcm7xx: clk: npcm7xx: fix return value check in npcm7xx_clk_init() clk: npcm7xx: add clock controller dt-binding: clk: npcm750: Add binding for Nuvoton NPCM7XX Clock * clk-of-parent-count: pinctrl: sunxi: Use of_clk_get_parent_count() instead of open coding soc/tegra: pmc: Use of_clk_get_parent_count() instead of open coding soc: rockchip: power-domain: Use of_clk_get_parent_count() instead of open coding ARM: timer-sp: Use of_clk_get_parent_count() instead of open coding clk: Extract OF clock helpers in <linux/of_clk.h> * clk-qcom-rcg-fix: clk: qcom: Base rcg parent rate off plan frequency
2018-06-04Merge branch 'clk-actions' into clk-nextStephen Boyd1-0/+129
* clk-actions: clk: actions: Add S900 SoC clock support clk: actions: Add pll clock support clk: actions: Add composite clock support clk: actions: Add fixed factor clock support clk: actions: Add factor clock support clk: actions: Add divider clock support clk: actions: Add mux clock support clk: actions: Add gate clock support clk: actions: Add common clock driver support dt-bindings: clock: Add Actions S900 clock bindings
2018-06-02dt-bindings: clk: Update Stingray binding docPramod Kumar1-7/+17
Update Stingray clock binding document to add additional clock entries with names matching the latest ASIC datasheet. Also modify a few existing entries to make their naming more consistent with the rest of the entries Signed-off-by: Pramod Kumar <pramod.kumar@broadcom.com> Signed-off-by: Ray Jui <ray.jui@broadcom.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-06-02clk: imx6: add EPIT clock supportColin Didier1-1/+3
Add EPIT clock support to the i.MX6Q clocking infrastructure. Signed-off-by: Colin Didier <colin.didier@devialet.com> Signed-off-by: Clément Peron <clement.peron@devialet.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-06-01clk: aspeed: Add 24MHz fixed clockLei YU1-0/+1
Add a 24MHz fixed clock. This clock will be used for certain devices, e.g. pwm. Signed-off-by: Lei YU <mine260309@gmail.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-06-01clk: imx7d: correct enet clock CCGR registersAnson Huang1-2/+2
Correct enet clock gates as below: CCGR6: IMX7D_ENET_AXI_ROOT_CLK (enet1 and enet2 bus clocks) CCGR112: IMX7D_ENET1_TIME_ROOT_CLK, IMX7D_ENET1_IPG_ROOT_CLK CCGR113: IMX7D_ENET2_TIME_ROOT_CLK, IMX7D_ENET2_IPG_ROOT_CLK Just rename unused IMX7D_ENETx_REF_ROOT_CLK for IMX7D_ENETx_IPG_ROOT_CLK instead of adding new clocks. Based on Andy Duan's patch from the NXP kernel tree. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-06-01dt-bindings: clock: Introduce QCOM Video clock bindingsAmit Nischal1-0/+35
Add device tree bindings for video clock controller for Qualcomm Technology Inc's SoCs. Signed-off-by: Amit Nischal <anischal@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-05-16clk: imx: Add new clo01 and clo2 controlled by CCOSRMichael Trimarchi1-13/+20
osc->cko2_sel->cko2_podf->clk_cko2->clk_cko Example of usage to provide clock to the sgtl5000 codec: sgtl5000@0a { compatible = "fsl,sgtl5000"; reg = <0x0a>; clocks = <&clks IMX6UL_CLK_OSC>; #sound-dai-cells = <0>; clocks = <&clks IMX6UL_CLK_CKO>; assigned-clocks = <&clks IMX6UL_CLK_CKO2_SEL>, <&clks IMX6UL_CLK_CKO2_PODF>, <&clks IMX6UL_CLK_CKO2>, <&clks IMX6UL_CLK_CKO>; assigned-clock-parents = <&clks IMX6UL_CLK_OSC>, <&clks IMX6UL_CLK_CKO2_SEL>, <&clks IMX6UL_CLK_CKO2_PODF>, <&clks IMX6UL_CLK_CKO2>; clock-names = "mclk"; wlf,shared-lrclk; Signed-off-by: Matteo Lisi <matteo.lisi@engicam.com> Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Tested-by: Michael Trimarchi <michael@amarulasolutions.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-05-16dt-bindings: clock: mediatek: add entry for Mali-450 node to referSean Wang1-0/+4
Just add binding for a required clock referenced by Mali-450 on MT7623 or MT2701 SoC. Cc: devicetree@vger.kernel.org Signed-off-by: Sean Wang <sean.wang@mediatek.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-05-16clk: mediatek: correct the clocks for MT2701 HDMI PHY moduleRyder Lee1-8/+8
The hdmitx_dig_cts clock signal is not a child of clk26m, and the actual output of the PLL block is derived from the tvdpll via a configurable PLL post-divider. It is used as the PLL reference input to the HDMI PHY module. Fixes: e9862118272a ("clk: mediatek: Add MT2701 clock support") Signed-off-by: Chunhui Dai <chunhui.dai@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-05-16clk: hisilicon: add missing usb3 clocks for Hi3798CV200 SoCJianguo Sun1-0/+8
There are two USB3 host controllers on Hi3798CV200 SoC. This commit adds missing clocks for them. Signed-off-by: Jianguo Sun <sunjianguo1@huawei.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-05-16clk:aspeed: Fix reset bits for PCI/VGA and PECIJae Hyun Yoo1-1/+1
This commit fixes incorrect setting of reset bits for PCI/VGA and PECI modules. 1. Reset bit for PCI/VGA is 8. 2. PECI reset bit is missing so added bit 10 as its reset bit. Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Fixes: 15ed8ce5f84e ("clk: aspeed: Register gated clocks") Cc: stable <stable@vger.kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-05-16clk: aspeed: Support second reset registerJoel Stanley1-0/+1
The ast2500 has an additional reset register that contains resets not present in the ast2400. This enables support for this register, and adds the one reset line that is controlled by it. Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-05-15dt-bindings: clock: reset: Add AXG AO Clock and Reset BindingsYixun Lan1-0/+26
Add dt-bindings headers for the Meson-AXG's AO clock and reset controller. Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-05-08clk: qcom: Add DT bindings for SDM845 gcc clock controllerAmit Nischal1-0/+239
Add compatible string and the include file for gcc clock controller for SDM845. Signed-off-by: Amit Nischal <anischal@codeaurora.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-05-05clk: imx6sx: add missing lvds2 clock to the clock treeAnson Huang1-1/+5
i.MX6SX has lvds2 (analog clock2), an I/O clock like lvds1. And this lvds2, along with lvds1, can be used to provide external clock source to the internal pll, such as pll4_audio and pll5_video. This patch mainly adds the lvds2 to the clock tree and fix its relationship with pll accordingly. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-05-04clk: sunxi-ng: add support for H6 PRCM CCUIcenowy Zheng1-0/+24
The H6 has clock/reset controls in PRCM part, like old SoCs such as H3 and A64. However, the PRCM CCU is rearranged; the register arragement is now similar to the main CCU of H6, and the PRCM now has two APB buses to control -- one is clocked from AHB clock derivde from AR100 clock, the other is clocked from the same mux with AR100 clock. Therefore a new driver is written for it. As there's no official document about the PRCM in H6, all the information are indirectly collected from BSP and parts of the document, and the information source is noted as comments in the driver's source code. If reliable information is provided furtherly, the driver needs to be rechecked. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-05-02dt-bindings: clock: Introduce QCOM RPMh clock bindingsTaniya Das1-0/+22
Add RPMh clock device bindings for Qualcomm Technology Inc's SoCs. These devices would be used for communicating resource state requests to control the clocks managed by RPMh. Signed-off-by: Taniya Das <tdas@codeaurora.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-04-25clk: meson: gxbb: expose VDEC_1 and VDEC_HEVC clocksMaxime Jourdan1-0/+2
Export video decoder clock dt-bindings Signed-off-by: Maxime Jourdan <maxi.jourdan@wanadoo.fr> [added commit description] Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-04-25dt-bindings: clock: meson8b: export the NAND clockMartin Blumenstingl1-0/+1
Export the NAND clock to the dt-bindings. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-04-24clk: renesas: Add r8a77990 CPG Core Clock DefinitionsTakeshi Kihara1-0/+62
This patch adds all R-Car E3 Clock Pulse Generator Core Clock Outputs. Note that internal CPG clocks (S0, S1, S2, S3, SDSRC, POST3) are not included, as they are used as internal clock sources only, and never referenced from DT. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> [shimoda: add SPDX-License-Identifier] Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-04-17clk: qcom: Add MSM8998 Global Clock Control (GCC) driverJoonwoo Park1-0/+208
Add support for the global clock controller found on MSM8998 based devices. This should allow most non-multimedia device drivers to probe and control their clocks. Signed-off-by: Joonwoo Park <joonwoop@codeaurora.org> Signed-off-by: Imran Khan <kimran@codeaurora.org> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> [bjorn: Specify regs for alpha_plls, fix white spaces and add binding] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-04-16Merge branch 'clk-stm32mp1' into clk-fixesStephen Boyd1-2/+2
* clk-stm32mp1: clk: stm32mp1: remove ck_apb_dbg clock clk: stm32mp1: set stgen_k clock as critical clk: stm32mp1: add missing tzc2 clock clk: stm32mp1: fix SAI3 & SAI4 clocks clk: stm32mp1: remove unused dfsdm_src[] const clk: stm32mp1: add missing static
2018-04-16clk: renesas: Add r8a77470 CPG Core Clock DefinitionsBiju Das1-0/+36
Add all RZ/G1C Clock Pulse Generator Core Clock Outputs, as listed in Table 7.2 ("List of Clocks [RZ/G1C]") of the RZ/G1C Hardware User's Manual. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> [geert: Use consecutive numbering] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-04-14Merge tag 'clk-for-linus' of ↵Linus Torvalds17-37/+853
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "The large diff this time around is from the addition of a new clk driver for the TI Davinci family of SoCs. So far those clks have been supported with a custom implementation of the clk API in the arch port instead of in the CCF. With this driver merged we're one step closer to having a single clk API implementation. The other large diff is from the Amlogic clk driver that underwent some major surgery to use regmap. Beyond that, the biggest hitter is Samsung which needed some reworks to properly handle clk provider power domains and a bunch of PLL rate updates. The core framework was fairly quiet this round, just getting some cleanups and small fixes for some of the more esoteric features. And the usual set of driver non-critical fixes, cleanups, and minor additions are here as well. Core: - Rejig clk_ops::init() to be a little earlier for phase/accuracy ops - debugfs ops macroized to shave some lines of boilerplate code - Always calculate the phase instead of caching it in clk_get_phase() - More __must_check on bulk clk APIs New Drivers: - TI's Davinci family of SoCs - Intel's Stratix10 SoC - stm32mp157 SoC - Allwinner H6 CCU - Silicon Labs SI544 clock generator chip - Renesas R-Car M3-N and V3H SoCs - i.MX6SLL SoCs Removed Drivers: - ST-Ericsson AB8540/9540 Updates: - Mediatek MT2701 and MT7622 audsys support and MT2712 updates - STM32F469 DSI and STM32F769 sdmmc2 support - GPIO clks can sleep now - Spreadtrum SC9860 RTC clks - Nvidia Tegra MBIST workarounds and various minor fixes - Rockchip phase handling fixes and a memory leak plugged - Renesas drivers switch to readl/writel from clk_readl/clk_writel - Renesas gained CPU (Z/Z2) and watchdog support - Rockchip rk3328 display clks and rk3399 1.6GHz PLL support - Qualcomm PM8921 PMIC XO buffers - Amlogic migrates to regmap APIs - TI Keystone clk latching support - Allwinner H3 and H5 video clk fixes - Broadcom BCM2835 PLLs needed another bit to enable - i.MX6SX CKO mux fix and i.MX7D Video PLL divider fix - i.MX6UL/ULL epdc_podf support - Hi3798CV200 COMBPHY0 and USB2_OTG_UTMI and phase support for eMMC" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (233 commits) clk: davinci: add a reset lookup table for psc0 clk: imx: add clock driver for imx6sll dt-bindings: imx: update clock doc for imx6sll clk: imx: add new gate/gate2 wrapper funtion clk: imx: Add CLK_IS_CRITICAL flag for busy divider and busy mux clk: cs2000: set pm_ops in hibernate-compatible way clk: bcm2835: De-assert/assert PLL reset signal when appropriate clk: imx7d: Move clks_init_on before any clock operations clk: imx7d: Correct ahb clk parent select clk: imx7d: Correct dram pll type clk: imx7d: Add USB clock information clk: socfpga: stratix10: add clock driver for Stratix10 platform dt-bindings: documentation: add clock bindings information for Stratix10 clk: ti: fix flag space conflict with clkctrl clocks clk: uniphier: add additional ethernet clock lines for Pro4 clk: uniphier: add SATA clock control support clk: uniphier: add PCIe clock control support clk: Add driver for the si544 clock generator chip clk: davinci: Remove redundant dev_err calls clk: uniphier: add ethernet clock control support for PXs3 ...
2018-04-06clk: stm32mp1: remove ck_apb_dbg clockGabriel Fernandez1-1/+0
It's recommended to use only clk_sys_dbg clock instead to activate debug IP. Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-04-06clk: stm32mp1: add missing tzc2 clockGabriel Fernandez1-1/+2
This patch adds tzc2 clock and rename tzc clock into tzc1 Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-04-06Merge branches 'clk-stratix10', 'clk-imx', 'clk-bcm', 'clk-cs2000' and ↵Stephen Boyd3-1/+290
'clk-imx6sll' into clk-next * clk-stratix10: clk: socfpga: stratix10: add clock driver for Stratix10 platform dt-bindings: documentation: add clock bindings information for Stratix10 * clk-imx: clk: imx7d: Move clks_init_on before any clock operations clk: imx7d: Correct ahb clk parent select clk: imx7d: Correct dram pll type clk: imx7d: Add USB clock information clk: imx: pllv2: avoid using uninitialized values clk: imx6ull: Add epdc_podf instead of sim_podf clk: imx: imx7d: correct video pll clock tree clk: imx: imx7d: add the Keypad Port module clock clk: imx7d: add CAAM clock clk: imx: imx7d: add the snvs clock clk: imx: imx6sx: update cko mux options * clk-bcm: clk: bcm2835: De-assert/assert PLL reset signal when appropriate * clk-cs2000: clk: cs2000: set pm_ops in hibernate-compatible way * clk-imx6sll: clk: imx: add clock driver for imx6sll dt-bindings: imx: update clock doc for imx6sll clk: imx: add new gate/gate2 wrapper funtion clk: imx: Add CLK_IS_CRITICAL flag for busy divider and busy mux
2018-04-06Merge branches 'clk-davinci', 'clk-si544', 'clk-rockchip', 'clk-uniphier' ↵Stephen Boyd1-1/+0
and 'clk-ti-flag-fix' into clk-next * clk-davinci: clk: davinci: Remove redundant dev_err calls clk: davinci: cfgchip: Add TI DA8XX USB PHY clocks clk: davinci: New driver for TI DA8XX CFGCHIP clocks dt-bindings: clock: Add bindings for DA8XX CFGCHIP clocks clk: davinci: Add platform information for TI DM646x PSC clk: davinci: Add platform information for TI DM644x PSC clk: davinci: Add platform information for TI DM365 PSC clk: davinci: Add platform information for TI DM355 PSC clk: davinci: Add platform information for TI DA850 PSC clk: davinci: Add platform information for TI DA830 PSC clk: davinci: New driver for davinci PSC clocks dt-bindings: clock: New bindings for TI Davinci PSC clk: davinci: Add platform information for TI DM646x PLL clk: davinci: Add platform information for TI DM644x PLL clk: davinci: Add platform information for TI DM365 PLL clk: davinci: Add platform information for TI DM355 PLL clk: davinci: Add platform information for TI DA850 PLL clk: davinci: Add platform information for TI DA830 PLL clk: davinci: New driver for davinci PLL clocks dt-bindings: clock: Add new bindings for TI Davinci PLL clocks * clk-si544: clk: Add driver for the si544 clock generator chip * clk-rockchip: clk: rockchip: assign correct id for pclk_ddr and hclk_sd in rk3399 clk: rockchip: Fix error return in phase clock registration clk: rockchip: Correct the behaviour of restoring cached phase clk: rockchip: Fix wrong parents for MMC phase clock for rk3328 clk: rockchip: Fix wrong parent for SDMMC phase clock for rk3228 clk: rockchip: Add 1.6GHz PLL rate for rk3399 clk: rockchip: Restore the clock phase after the rate was changed clk: rockchip: Prevent calculating mmc phase if clock rate is zero clk: rockchip: Free the memory on the error path clk: rockchip: document hdmi_phy external input for rk3328 clk: rockchip: add flags for rk3328 dclk_lcdc clk: rockchip: remove ignore_unused flag from rk3328 vio_h2p clocks clk: rockchip: protect all remaining rk3328 interconnect clocks clk: rockchip: export sclk_hdmi_sfc on rk3328 clk: rockchip: remove HCLK_VIO from rk3328 dt header clk: rockchip: fix hclk_vio_niu on rk3328 * clk-uniphier: clk: uniphier: add additional ethernet clock lines for Pro4 clk: uniphier: add SATA clock control support clk: uniphier: add PCIe clock control support clk: uniphier: add ethernet clock control support for PXs3 clk: uniphier: add Pro4/Pro5/PXs2 audio system clock * clk-ti-flag-fix: clk: ti: fix flag space conflict with clkctrl clocks clk: ti: clkctrl: add support for CLK_SET_RATE_PARENT flag
2018-04-06Merge branches 'clk-mediatek', 'clk-hisi', 'clk-allwinner', 'clk-ux500' and ↵Stephen Boyd7-29/+272
'clk-renesas' into clk-next * clk-mediatek: clk: mediatek: add audsys support for MT2701 clk: mediatek: add devm_of_platform_populate() for MT7622 audsys dt-bindings: clock: mediatek: add audsys support for MT2701 dt-bindings: clock: mediatek: update audsys documentation to adapt MFD device clk: mediatek: update missing clock data for MT7622 audsys clk: mediatek: fix PWM clock source by adding a fixed-factor clock dt-bindings: clock: mediatek: add binding for fixed-factor clock axisel_d4 * clk-hisi: clk: hisilicon: fix potential NULL dereference in hisi_clk_alloc() clk: hisilicon: mark wdt_mux_p[] as const clk: hisilicon: Mark phase_ops static clk: hi3798cv200: add emmc sample and drive clock clk: hisilicon: add hisi phase clock support clk: hi3798cv200: add COMBPHY0 clock support clk: hi3798cv200: fix define indentation clk: hi3798cv200: add support for HISTB_USB2_OTG_UTMI_CLK clk: hi3798cv200: correct IR clock parent clk: hi3798cv200: fix unregister call sequence in error path * clk-allwinner: clk: sunxi-ng: add missing hdmi-slow clock for H6 CCU clk: sunxi-ng: add support for the Allwinner H6 CCU dt-bindings: add device tree binding for Allwinner H6 main CCU clk: sunxi-ng: Support fixed post-dividers on NKMP style clocks clk: sunxi-ng: h3: h5: export CLK_PLL_VIDEO clk: sunxi-ng: h3: h5: Allow some clocks to set parent rate clk: sunxi-ng: h3: h5: Add minimal rate for video PLL clk: sunxi-ng: Add check for minimal rate to NM PLLs clk: sunxi-ng: Use u64 for calculation of nkmp rate clk: sunxi-ng: Mask nkmp factors when setting register clk: sunxi-ng: remove select on obsolete SUNXI_CCU_X kconfig name * clk-ux500: clk: ux500: Drop AB8540/9540 support * clk-renesas: (27 commits) clk: renesas: cpg-mssr: Adjust r8a77980 ifdef clk: renesas: rcar-gen3: Always use readl()/writel() clk: renesas: sh73a0: Always use readl()/writel() clk: renesas: rza1: Always use readl()/writel() clk: renesas: rcar-gen2: Always use readl()/writel() clk: renesas: r8a7740: Always use readl()/writel() clk: renesas: r8a73a4: Always use readl()/writel() clk: renesas: mstp: Always use readl()/writel() clk: renesas: div6: Always use readl()/writel() clk: fix false-positive Wmaybe-uninitialized warning clk: renesas: r8a77965: Replace DU2 clock clk: renesas: cpg-mssr: Add support for R-Car M3-N clk: renesas: cpg-mssr: add R8A77980 support dt-bindings: clock: add R8A77980 CPG core clock definitions clk: renesas: r8a7792: Add rwdt clock clk: renesas: r8a7794: Add rwdt clock clk: renesas: r8a7791/r8a7793: Add rwdt clock clk: renesas: r8a7790: Add rwdt clock clk: renesas: r8a7745: Add rwdt clock clk: renesas: r8a7743: Add rwdt clock ...
2018-04-06Merge branches 'clk-mvebu', 'clk-phase', 'clk-nxp', 'clk-mtk2712' and ↵Stephen Boyd2-2/+15
'clk-qcom-rpmcc' into clk-next * clk-mvebu: clk: mvebu: armada-38x: add support for missing clocks clk: mvebu: cp110: Fix clock tree representation * clk-phase: clk: Don't show the incorrect clock phase clk: update cached phase to respect the fact when setting phase * clk-nxp: clk: lpc32xx: Set name of regmap_config * clk-mtk2712: clk: mediatek: update clock driver of MT2712 dt-bindings: clock: add clocks for MT2712 * clk-qcom-rpmcc: clk: qcom: rpmcc: Add support to XO buffered clocks
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-29 03:17:43 +0300