| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core & protocols:
- A significant effort all around the stack to guide the compiler to
make the right choice when inlining code, to avoid unneeded calls
for small helper and stack canary overhead in the fast-path.
This generates better and faster code with very small or no text
size increases, as in many cases the call generated more code than
the actual inlined helper.
- Extend AccECN implementation so that is now functionally complete,
also allow the user-space enabling it on a per network namespace
basis.
- Add support for memory providers with large (above 4K) rx buffer.
Paired with hw-gro, larger rx buffer sizes reduce the number of
buffers traversing the stack, dincreasing single stream CPU usage
by up to ~30%.
- Do not add HBH header to Big TCP GSO packets. This simplifies the
RX path, the TX path and the NIC drivers, and is possible because
user-space taps can now interpret correctly such packets without
the HBH hint.
- Allow IPv6 routes to be configured with a gateway address that is
resolved out of a different interface than the one specified,
aligning IPv6 to IPv4 behavior.
- Multi-queue aware sch_cake. This makes it possible to scale the
rate shaper of sch_cake across multiple CPUs, while still enforcing
a single global rate on the interface.
- Add support for the nbcon (new buffer console) infrastructure to
netconsole, enabling lock-free, priority-based console operations
that are safer in crash scenarios.
- Improve the TCP ipv6 output path to cache the flow information,
saving cpu cycles, reducing cache line misses and stack use.
- Improve netfilter packet tracker to resolve clashes for most
protocols, avoiding unneeded drops on rare occasions.
- Add IP6IP6 tunneling acceleration to the flowtable infrastructure.
- Reduce tcp socket size by one cache line.
- Notify neighbour changes atomically, avoiding inconsistencies
between the notification sequence and the actual states sequence.
- Add vsock namespace support, allowing complete isolation of vsocks
across different network namespaces.
- Improve xsk generic performances with cache-alignment-oriented
optimizations.
- Support netconsole automatic target recovery, allowing netconsole
to reestablish targets when underlying low-level interface comes
back online.
Driver API:
- Support for switching the working mode (automatic vs manual) of a
DPLL device via netlink.
- Introduce PHY ports representation to expose multiple front-facing
media ports over a single MAC.
- Introduce "rx-polarity" and "tx-polarity" device tree properties,
to generalize polarity inversion requirements for differential
signaling.
- Add helper to create, prepare and enable managed clocks.
Device drivers:
- Add Huawei hinic3 PF etherner driver.
- Add DWMAC glue driver for Motorcomm YT6801 PCIe ethernet
controller.
- Add ethernet driver for MaxLinear MxL862xx switches
- Remove parallel-port Ethernet driver.
- Convert existing driver timestamp configuration reporting to
hwtstamp_get and remove legacy ioctl().
- Convert existing drivers to .get_rx_ring_count(), simplifing the RX
ring count retrieval. Also remove the legacy fallback path.
- Ethernet high-speed NICs:
- Broadcom (bnxt, bng):
- bnxt: add FW interface update to support FEC stats histogram
and NVRAM defragmentation
- bng: add TSO and H/W GRO support
- nVidia/Mellanox (mlx5):
- improve latency of channel restart operations, reducing the
used H/W resources
- add TSO support for UDP over GRE over VLAN
- add flow counters support for hardware steering (HWS) rules
- use a static memory area to store headers for H/W GRO,
leading to 12% RX tput improvement
- Intel (100G, ice, idpf):
- ice: reorganizes layout of Tx and Rx rings for cacheline
locality and utilizes __cacheline_group* macros on the new
layouts
- ice: introduces Synchronous Ethernet (SyncE) support
- Meta (fbnic):
- adds debugfs for firmware mailbox and tx/rx rings vectors
- Ethernet virtual:
- geneve: introduce GRO/GSO support for double UDP encapsulation
- Ethernet NICs consumer, and embedded:
- Synopsys (stmmac):
- some code refactoring and cleanups
- RealTek (r8169):
- add support for RTL8127ATF (10G Fiber SFP)
- add dash and LTR support
- Airoha:
- AN8811HB 2.5 Gbps phy support
- Freescale (fec):
- add XDP zero-copy support
- Thunderbolt:
- add get link setting support to allow bonding
- Renesas:
- add support for RZ/G3L GBETH SoC
- Ethernet switches:
- Maxlinear:
- support R(G)MII slow rate configuration
- add support for Intel GSW150
- Motorcomm (yt921x):
- add DCB/QoS support
- TI:
- icssm-prueth: support bridging (STP/RSTP) via the switchdev
framework
- Ethernet PHYs:
- Realtek:
- enable SGMII and 2500Base-X in-band auto-negotiation
- simplify and reunify C22/C45 drivers
- Micrel: convert bindings to DT schema
- CAN:
- move skb headroom content into skb extensions, making CAN
metadata access more robust
- CAN drivers:
- rcar_canfd:
- add support for FD-only mode
- add support for the RZ/T2H SoC
- sja1000: cleanup the CAN state handling
- WiFi:
- implement EPPKE/802.1X over auth frames support
- split up drop reasons better, removing generic RX_DROP
- additional FTM capabilities: 6 GHz support, supported number of
spatial streams and supported number of LTF repetitions
- better mac80211 iterators to enumerate resources
- initial UHR (Wi-Fi 8) support for cfg80211/mac80211
- WiFi drivers:
- Qualcomm/Atheros:
- ath11k: support for Channel Frequency Response measurement
- ath12k: a significant driver refactor to support multi-wiphy
devices and and pave the way for future device support in the
same driver (rather than splitting to ath13k)
- ath12k: support for the QCC2072 chipset
- Intel:
- iwlwifi: partial Neighbor Awareness Networking (NAN) support
- iwlwifi: initial support for U-NII-9 and IEEE 802.11bn
- RealTek (rtw89):
- preparations for RTL8922DE support
- Bluetooth:
- implement setsockopt(BT_PHY) to set the connection packet type/PHY
- set link_policy on incoming ACL connections
- Bluetooth drivers:
- btusb: add support for MediaTek7920, Realtek RTL8761BU and 8851BE
- btqca: add WCN6855 firmware priority selection feature"
* tag 'net-next-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1254 commits)
bnge/bng_re: Add a new HSI
net: macb: Fix tx/rx malfunction after phy link down and up
af_unix: Fix memleak of newsk in unix_stream_connect().
net: ti: icssg-prueth: Add optional dependency on HSR
net: dsa: add basic initial driver for MxL862xx switches
net: mdio: add unlocked mdiodev C45 bus accessors
net: dsa: add tag format for MxL862xx switches
dt-bindings: net: dsa: add MaxLinear MxL862xx
selftests: drivers: net: hw: Modify toeplitz.c to poll for packets
octeontx2-pf: Unregister devlink on probe failure
net: renesas: rswitch: fix forwarding offload statemachine
ionic: Rate limit unknown xcvr type messages
tcp: inet6_csk_xmit() optimization
tcp: populate inet->cork.fl.u.ip6 in tcp_v6_syn_recv_sock()
tcp: populate inet->cork.fl.u.ip6 in tcp_v6_connect()
ipv6: inet6_csk_xmit() and inet6_csk_update_pmtu() use inet->cork.fl.u.ip6
ipv6: use inet->cork.fl.u.ip6 and np->final in ip6_datagram_dst_update()
ipv6: use np->final in inet6_sk_rebuild_header()
ipv6: add daddr/final storage in struct ipv6_pinfo
net: stmmac: qcom-ethqos: fix qcom_ethqos_serdes_powerup()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
"Lock debugging:
- Implement compiler-driven static analysis locking context checking,
using the upcoming Clang 22 compiler's context analysis features
(Marco Elver)
We removed Sparse context analysis support, because prior to
removal even a defconfig kernel produced 1,700+ context tracking
Sparse warnings, the overwhelming majority of which are false
positives. On an allmodconfig kernel the number of false positive
context tracking Sparse warnings grows to over 5,200... On the plus
side of the balance actual locking bugs found by Sparse context
analysis is also rather ... sparse: I found only 3 such commits in
the last 3 years. So the rate of false positives and the
maintenance overhead is rather high and there appears to be no
active policy in place to achieve a zero-warnings baseline to move
the annotations & fixers to developers who introduce new code.
Clang context analysis is more complete and more aggressive in
trying to find bugs, at least in principle. Plus it has a different
model to enabling it: it's enabled subsystem by subsystem, which
results in zero warnings on all relevant kernel builds (as far as
our testing managed to cover it). Which allowed us to enable it by
default, similar to other compiler warnings, with the expectation
that there are no warnings going forward. This enforces a
zero-warnings baseline on clang-22+ builds (Which are still limited
in distribution, admittedly)
Hopefully the Clang approach can lead to a more maintainable
zero-warnings status quo and policy, with more and more subsystems
and drivers enabling the feature. Context tracking can be enabled
for all kernel code via WARN_CONTEXT_ANALYSIS_ALL=y (default
disabled), but this will generate a lot of false positives.
( Having said that, Sparse support could still be added back,
if anyone is interested - the removal patch is still
relatively straightforward to revert at this stage. )
Rust integration updates: (Alice Ryhl, Fujita Tomonori, Boqun Feng)
- Add support for Atomic<i8/i16/bool> and replace most Rust native
AtomicBool usages with Atomic<bool>
- Clean up LockClassKey and improve its documentation
- Add missing Send and Sync trait implementation for SetOnce
- Make ARef Unpin as it is supposed to be
- Add __rust_helper to a few Rust helpers as a preparation for
helper LTO
- Inline various lock related functions to avoid additional function
calls
WW mutexes:
- Extend ww_mutex tests and other test-ww_mutex updates (John
Stultz)
Misc fixes and cleanups:
- rcu: Mark lockdep_assert_rcu_helper() __always_inline (Arnd
Bergmann)
- locking/local_lock: Include more missing headers (Peter Zijlstra)
- seqlock: fix scoped_seqlock_read kernel-doc (Randy Dunlap)
- rust: sync: Replace `kernel::c_str!` with C-Strings (Tamir
Duberstein)"
* tag 'locking-core-2026-02-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (90 commits)
locking/rwlock: Fix write_trylock_irqsave() with CONFIG_INLINE_WRITE_TRYLOCK
rcu: Mark lockdep_assert_rcu_helper() __always_inline
compiler-context-analysis: Remove __assume_ctx_lock from initializers
tomoyo: Use scoped init guard
crypto: Use scoped init guard
kcov: Use scoped init guard
compiler-context-analysis: Introduce scoped init guards
cleanup: Make __DEFINE_LOCK_GUARD handle commas in initializers
seqlock: fix scoped_seqlock_read kernel-doc
tools: Update context analysis macros in compiler_types.h
rust: sync: Replace `kernel::c_str!` with C-Strings
rust: sync: Inline various lock related methods
rust: helpers: Move #define __rust_helper out of atomic.c
rust: wait: Add __rust_helper to helpers
rust: time: Add __rust_helper to helpers
rust: task: Add __rust_helper to helpers
rust: sync: Add __rust_helper to helpers
rust: refcount: Add __rust_helper to helpers
rust: rcu: Add __rust_helper to helpers
rust: processor: Add __rust_helper to helpers
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull keys update from David Howells:
"This adds support for ML-DSA signatures in X.509 certificates and
PKCS#7/CMS messages, thereby allowing this algorithm to be used for
signing modules, kexec'able binaries, wifi regulatory data, etc..
This requires OpenSSL-3.5 at a minimum and preferably OpenSSL-4 (so
that it can avoid the use of CMS signedAttrs - but that version is not
cut yet). certs/Kconfig does a check to hide the signing options if
OpenSSL does not list the algorithm as being available"
* tag 'keys-next-20260206' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
pkcs7: Change a pr_warn() to pr_warn_once()
pkcs7: Allow authenticatedAttributes for ML-DSA
modsign: Enable ML-DSA module signing
pkcs7, x509: Add ML-DSA support
pkcs7: Allow the signing algo to do whatever digestion it wants itself
pkcs7, x509: Rename ->digest to ->m
x509: Separately calculate sha256 for blacklist
crypto: Add ML-DSA crypto_sig support
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu:
"API:
- Fix race condition in hwrng core by using RCU
Algorithms:
- Allow authenc(sha224,rfc3686) in fips mode
- Add test vectors for authenc(hmac(sha384),cbc(aes))
- Add test vectors for authenc(hmac(sha224),cbc(aes))
- Add test vectors for authenc(hmac(md5),cbc(des3_ede))
- Add lz4 support in hisi_zip
- Only allow clear key use during self-test in s390/{phmac,paes}
Drivers:
- Set rng quality to 900 in airoha
- Add gcm(aes) support for AMD/Xilinx Versal device
- Allow tfms to share device in hisilicon/trng"
* tag 'v7.0-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (100 commits)
crypto: img-hash - Use unregister_ahashes in img_{un}register_algs
crypto: testmgr - Add test vectors for authenc(hmac(md5),cbc(des3_ede))
crypto: cesa - Simplify return statement in mv_cesa_dequeue_req_locked
crypto: testmgr - Add test vectors for authenc(hmac(sha224),cbc(aes))
crypto: testmgr - Add test vectors for authenc(hmac(sha384),cbc(aes))
hwrng: core - use RCU and work_struct to fix race condition
crypto: starfive - Fix memory leak in starfive_aes_aead_do_one_req()
crypto: xilinx - Fix inconsistant indentation
crypto: rng - Use unregister_rngs in register_rngs
crypto: atmel - Use unregister_{aeads,ahashes,skciphers}
hwrng: optee - simplify OP-TEE context match
crypto: ccp - Add sysfs attribute for boot integrity
dt-bindings: crypto: atmel,at91sam9g46-sha: add microchip,lan9691-sha
dt-bindings: crypto: atmel,at91sam9g46-aes: add microchip,lan9691-aes
dt-bindings: crypto: qcom,inline-crypto-engine: document the Milos ICE
crypto: caam - fix netdev memory leak in dpaa2_caam_probe
crypto: hisilicon/qm - increase wait time for mailbox
crypto: hisilicon/qm - obtain the mailbox configuration at one time
crypto: hisilicon/qm - remove unnecessary code in qm_mb_write()
crypto: hisilicon/qm - move the barrier before writing to the mailbox register
...
|
|
mldsa_verify() implements ML-DSA.Verify with ctx='', so document this
more explicitly. Remove the one-liner comment above mldsa_verify()
which was somewhat misleading.
Reviewed-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20260202221552.174341-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Add a new helper function crypto_skcipher_tested() which evaluates
the CRYPTO_ALG_TESTED flag from the tfm base cra_flags field.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Allow the data to be verified in a PKCS#7 or CMS message to be passed
directly to an asymmetric cipher algorithm (e.g. ML-DSA) if it wants to do
whatever passes for hashing/digestion itself. The normal digestion of the
data is then skipped as that would be ignored unless another signed info in
the message has some other algorithm that needs it.
The 'data to be verified' may be the content of the PKCS#7 message or it
will be the authenticatedAttributes (signedAttrs if CMS), modified, if
those are present.
This is done by:
(1) Make ->m and ->m_size point to the data to be verified rather than
making public_key_verify_signature() access the data directly. This
is so that keyctl(KEYCTL_PKEY_VERIFY) will still work.
(2) Add a flag, ->algo_takes_data, to indicate that the verification
algorithm wants to access the data to be verified directly rather than
having it digested first.
(3) If the PKCS#7 message has authenticatedAttributes (or CMS
signedAttrs), then the digest contained therein will be validated as
now, and the modified attrs blob will either be digested or assigned
to ->m as appropriate.
(4) If present, always copy and modify the authenticatedAttributes (or
signedAttrs) then digest that in one go rather than calling the shash
update twice (once for the tag and once for the rest).
(5) For ML-DSA, point ->m to the TBSCertificate instead of digesting it
and using the digest.
Note that whilst ML-DSA does allow for an "external mu", CMS doesn't yet
have that standardised.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Lukas Wunner <lukas@wunner.de>
cc: Ignat Korchagin <ignat@cloudflare.com>
cc: Stephan Mueller <smueller@chronox.de>
cc: Eric Biggers <ebiggers@kernel.org>
cc: Herbert Xu <herbert@gondor.apana.org.au>
cc: keyrings@vger.kernel.org
cc: linux-crypto@vger.kernel.org
|
|
Rename ->digest and ->digest_len to ->m and ->m_size to represent the input
to the signature verification algorithm, reflecting that ->digest may no
longer actually *be* a digest.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
cc: Lukas Wunner <lukas@wunner.de>
cc: Ignat Korchagin <ignat@cloudflare.com>
cc: Stephan Mueller <smueller@chronox.de>
cc: Eric Biggers <ebiggers@kernel.org>
cc: Herbert Xu <herbert@gondor.apana.org.au>
cc: keyrings@vger.kernel.org
cc: linux-crypto@vger.kernel.org
|
|
Now that there are no users of the low-level SHA-1 interface, remove it.
Specifically:
- Remove SHA1_DIGEST_WORDS (no longer used)
- Remove sha1_init_raw() (no longer used)
- Rename sha1_transform() to sha1_block_generic() and make it static
- Move SHA1_WORKSPACE_WORDS into lib/crypto/sha1.c
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://patch.msgid.link/20260123051656.396371-3-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now that all callers of the aes_encrypt() and aes_decrypt() type-generic
macros are using the new types, remove the old functions.
Then, replace the macro with direct calls to the new functions, dropping
the "_new" suffix from them.
This completes the change in the type of the key struct that is passed
to aes_encrypt() and aes_decrypt().
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260112192035.10427-35-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Switch from the old AES library functions (which use struct
crypto_aes_ctx) to the new ones (which use struct aes_enckey). This
eliminates the unnecessary computation and caching of the decryption
round keys. The new AES en/decryption functions are also much faster
and use AES instructions when supported by the CPU.
Note that in addition to the change in the key preparation function and
the key struct type itself, the change in the type of the key struct
results in aes_encrypt() (which is temporarily a type-generic macro)
calling the new encryption function rather than the old one.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260112192035.10427-34-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Switch from the old AES library functions (which use struct
crypto_aes_ctx) to the new ones (which use struct aes_enckey). This
eliminates the unnecessary computation and caching of the decryption
round keys. The new AES en/decryption functions are also much faster
and use AES instructions when supported by the CPU.
Note that in addition to the change in the key preparation function and
the key struct type itself, the change in the type of the key struct
results in aes_encrypt() (which is temporarily a type-generic macro)
calling the new encryption function rather than the old one.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260112192035.10427-33-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Switch from the old AES library functions (which use struct
crypto_aes_ctx) to the new ones (which use struct aes_enckey). This
eliminates the unnecessary computation and caching of the decryption
round keys. The new AES en/decryption functions are also much faster
and use AES instructions when supported by the CPU.
Note that in addition to the change in the key preparation function and
the key struct type itself, the change in the type of the key struct
results in aes_encrypt() (which is temporarily a type-generic macro)
calling the new encryption function rather than the old one.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260112192035.10427-30-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Move the SPARC64 AES assembly code into lib/crypto/, wire the key
expansion and single-block en/decryption functions up to the AES library
API, and remove the "aes-sparc64" crypto_cipher algorithm.
The result is that both the AES library and crypto_cipher APIs use the
SPARC64 AES opcodes, whereas previously only crypto_cipher did (and it
wasn't enabled by default, which this commit fixes as well).
Note that some of the functions in the SPARC64 AES assembly code are
still used by the AES mode implementations in
arch/sparc/crypto/aes_glue.c. For now, just export these functions.
These exports will go away once the AES mode implementations are
migrated to the library as well. (Trying to split up the assembly file
seemed like much more trouble than it would be worth.)
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260112192035.10427-17-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Implement aes_preparekey_arch(), aes_encrypt_arch(), and
aes_decrypt_arch() using the CPACF AES instructions.
Then, remove the superseded "aes-s390" crypto_cipher.
The result is that both the AES library and crypto_cipher APIs use the
CPACF AES instructions, whereas previously only crypto_cipher did (and
it wasn't enabled by default, which this commit fixes as well).
Note that this preserves the optimization where the AES key is stored in
raw form rather than expanded form. CPACF just takes the raw key.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Holger Dengler <dengler@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Link: https://lore.kernel.org/r/20260112192035.10427-16-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Move the POWER8 AES assembly code into lib/crypto/, wire the key
expansion and single-block en/decryption functions up to the AES library
API, and remove the superseded "p8_aes" crypto_cipher algorithm.
The result is that both the AES library and crypto_cipher APIs are now
optimized for POWER8, whereas previously only crypto_cipher was (and
optimizations weren't enabled by default, which this commit fixes too).
Note that many of the functions in the POWER8 assembly code are still
used by the AES mode implementations in arch/powerpc/crypto/. For now,
just export these functions. These exports will go away once the AES
modes are migrated to the library as well. (Trying to split up the
assembly file seemed like much more trouble than it would be worth.)
Another challenge with this code is that the POWER8 assembly code uses a
custom format for the expanded AES key. Since that code is imported
from OpenSSL and is also targeted to POWER8 (rather than POWER9 which
has better data movement and byteswap instructions), that is not easily
changed. For now I've just kept the custom format. To maintain full
correctness, this requires executing some slow fallback code in the case
where the usability of VSX changes between key expansion and use. This
should be tolerable, as this case shouldn't happen in practice.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260112192035.10427-14-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Move the PowerPC SPE AES assembly code into lib/crypto/, wire the key
expansion and single-block en/decryption functions up to the AES library
API, and remove the superseded "aes-ppc-spe" crypto_cipher algorithm.
The result is that both the AES library and crypto_cipher APIs are now
optimized with SPE, whereas previously only crypto_cipher was (and
optimizations weren't enabled by default, which this commit fixes too).
Note that many of the functions in the PowerPC SPE assembly code are
still used by the AES mode implementations in arch/powerpc/crypto/. For
now, just export these functions. These exports will go away once the
AES modes are migrated to the library as well. (Trying to split up the
assembly files seemed like much more trouble than it would be worth.)
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260112192035.10427-13-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Move the ARM64 optimized AES key expansion and single-block AES
en/decryption code into lib/crypto/, wire it up to the AES library API,
and remove the superseded crypto_cipher algorithms.
The result is that both the AES library and crypto_cipher APIs are now
optimized for ARM64, whereas previously only crypto_cipher was (and the
optimizations weren't enabled by default, which this fixes as well).
Note: to see the diff from arch/arm64/crypto/aes-ce-glue.c to
lib/crypto/arm64/aes.h, view this commit with 'git show -M10'.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260112192035.10427-12-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Now that the AES library's performance has been improved, replace
aes_generic.c with a new file aes.c which wraps the AES library.
In preparation for making the AES library actually utilize the kernel's
existing architecture-optimized AES code including AES instructions, set
the driver name to "aes-lib" instead of "aes-generic". This mirrors
what's been done for the hash algorithms. Update testmgr.c accordingly.
Since this removes the crypto_aes_set_key() helper function, add
temporary replacements for it to arch/arm/crypto/aes-cipher-glue.c and
arch/arm64/crypto/aes-cipher-glue.c. This is temporary, as that code
will be migrated into lib/crypto/ in later commits.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260112192035.10427-10-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
The kernel's AES library currently has the following issues:
- It doesn't take advantage of the architecture-optimized AES code,
including the implementations using AES instructions.
- It's much slower than even the other software AES implementations: 2-4
times slower than "aes-generic", "aes-arm", and "aes-arm64".
- It requires that both the encryption and decryption round keys be
computed and cached. This is wasteful for users that need only the
forward (encryption) direction of the cipher: the key struct is 484
bytes when only 244 are actually needed. This missed optimization is
very common, as many AES modes (e.g. GCM, CFB, CTR, CMAC, and even the
tweak key in XTS) use the cipher only in the forward (encryption)
direction even when doing decryption.
- It doesn't provide the flexibility to customize the prepared key
format. The API is defined to do key expansion, and several callers
in drivers/crypto/ use it specifically to expand the key. This is an
issue when integrating the existing powerpc, s390, and sparc code,
which is necessary to provide full parity with the traditional API.
To resolve these issues, I'm proposing the following changes:
1. New structs 'aes_key' and 'aes_enckey' are introduced, with
corresponding functions aes_preparekey() and aes_prepareenckey().
Generally these structs will include the encryption+decryption round
keys and the encryption round keys, respectively. However, the exact
format will be under control of the architecture-specific AES code.
(The verb "prepare" is chosen over "expand" since key expansion isn't
necessarily done. It's also consistent with hmac*_preparekey().)
2. aes_encrypt() and aes_decrypt() will be changed to operate on the new
structs instead of struct crypto_aes_ctx.
3. aes_encrypt() and aes_decrypt() will use architecture-optimized code
when available, or else fall back to a new generic AES implementation
that unifies the existing two fragmented generic AES implementations.
The new generic AES implementation uses tables for both SubBytes and
MixColumns, making it almost as fast as "aes-generic". However,
instead of aes-generic's huge 8192-byte tables per direction, it uses
only 1024 bytes for encryption and 1280 bytes for decryption (similar
to "aes-arm"). The cost is just some extra rotations.
The new generic AES implementation also includes table prefetching,
making it have some "constant-time hardening". That's an improvement
from aes-generic which has no constant-time hardening.
It does slightly regress in constant-time hardening vs. the old
lib/crypto/aes.c which had smaller tables, and from aes-fixed-time
which disabled IRQs on top of that. But I think this is tolerable.
The real solutions for constant-time AES are AES instructions or
bit-slicing. The table-based code remains a best-effort fallback for
the increasingly-rare case where a real solution is unavailable.
4. crypto_aes_ctx and aes_expandkey() will remain for now, but only for
callers that are using them specifically for the AES key expansion
(as opposed to en/decrypting data with the AES library).
This commit begins the migration process by introducing the new structs
and functions, backed by the new generic AES implementation.
To allow callers to be incrementally converted, aes_encrypt() and
aes_decrypt() are temporarily changed into macros that use a _Generic
expression to call either the old functions (which take crypto_aes_ctx)
or the new functions (which take the new types). Once all callers have
been updated, these macros will go away, the old functions will be
removed, and the "_new" suffix will be dropped from the new functions.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260112192035.10427-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Remove nhpoly1305 support from crypto_shash. It no longer has any user
now that crypto/adiantum.c no longer uses it.
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Link: https://lore.kernel.org/r/20251211011846.8179-11-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Add support for the NH "almost-universal hash function" to lib/crypto/,
specifically the variant of NH used in Adiantum.
This will replace the need for the "nhpoly1305" crypto_shash algorithm.
All the implementations of "nhpoly1305" use architecture-optimized code
only for the NH stage; they just use the generic C Poly1305 code for the
Poly1305 stage. We can achieve the same result in a simpler way using
an (architecture-optimized) nh() function combined with code in
crypto/adiantum.c that passes the results to the Poly1305 library.
This commit begins this cleanup by adding the nh() function. The code
is derived from crypto/nhpoly1305.c and include/crypto/nhpoly1305.h.
Link: https://lore.kernel.org/r/20251211011846.8179-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Add support for verifying ML-DSA signatures.
ML-DSA (Module-Lattice-Based Digital Signature Algorithm) is specified
in FIPS 204 and is the standard version of Dilithium. Unlike RSA and
elliptic-curve cryptography, ML-DSA is believed to be secure even
against adversaries in possession of a large-scale quantum computer.
Compared to the earlier patch
(https://lore.kernel.org/r/20251117145606.2155773-3-dhowells@redhat.com/)
that was based on "leancrypto", this implementation:
- Is about 700 lines of source code instead of 4800.
- Generates about 4 KB of object code instead of 28 KB.
- Uses 9-13 KB of memory to verify a signature instead of 31-84 KB.
- Is at least about the same speed, with a microbenchmark showing 3-5%
improvements on one x86_64 CPU and -1% to 1% changes on another.
When memory is a bottleneck, it's likely much faster.
- Correctly implements the RejNTTPoly step of the algorithm.
The API just consists of a single function mldsa_verify(), supporting
pure ML-DSA with any standard parameter set (ML-DSA-44, ML-DSA-65, or
ML-DSA-87) as selected by an enum. That's all that's actually needed.
The following four potential features are unneeded and aren't included.
However, any that ever become needed could fairly easily be added later,
as they only affect how the message representative mu is calculated:
- Nonempty context strings
- Incremental message hashing
- HashML-DSA
- External mu
Signing support would, of course, be a larger and more complex addition.
However, the kernel doesn't, and shouldn't, need ML-DSA signing support.
Note that mldsa_verify() allocates memory, so it can sleep and can fail
with ENOMEM. Unfortunately we don't have much choice about that, since
ML-DSA needs a lot of memory. At least callers have to check for errors
anyway, since the signature could be invalid.
Note that verification doesn't require constant-time code, and in fact
some steps are inherently variable-time. I've used constant-time
patterns in some places anyway, but technically they're not needed.
Reviewed-by: David Howells <dhowells@redhat.com>
Tested-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20251214181712.29132-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Enable context analysis for crypto subsystem.
This demonstrates a larger conversion to use Clang's context
analysis. The benefit is additional static checking of locking rules,
along with better documentation.
Note the use of the __acquire_ret macro how to define an API where a
function returns a pointer to an object (struct scomp_scratch) with a
lock held. Additionally, the analysis only resolves aliases where the
analysis unambiguously sees that a variable was not reassigned after
initialization, requiring minor code changes.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251219154418.3592607-36-elver@google.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Rewrite memcpy_sglist from scratch
- Add on-stack AEAD request allocation
- Fix partial block processing in ahash
Algorithms:
- Remove ansi_cprng
- Remove tcrypt tests for poly1305
- Fix EINPROGRESS processing in authenc
- Fix double-free in zstd
Drivers:
- Use drbg ctr helper when reseeding xilinx-trng
- Add support for PCI device 0x115A to ccp
- Add support of paes in caam
- Add support for aes-xts in dthev2
Others:
- Use likely in rhashtable lookup
- Fix lockdep false-positive in padata by removing a helper"
* tag 'v6.19-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (71 commits)
crypto: zstd - fix double-free in per-CPU stream cleanup
crypto: ahash - Zero positive err value in ahash_update_finish
crypto: ahash - Fix crypto_ahash_import with partial block data
crypto: lib/mpi - use min() instead of min_t()
crypto: ccp - use min() instead of min_t()
hwrng: core - use min3() instead of nested min_t()
crypto: aesni - ctr_crypt() use min() instead of min_t()
crypto: drbg - Delete unused ctx from struct sdesc
crypto: testmgr - Add missing DES weak and semi-weak key tests
Revert "crypto: scatterwalk - Move skcipher walk and use it for memcpy_sglist"
crypto: scatterwalk - Fix memcpy_sglist() to always succeed
crypto: iaa - Request to add Kanchana P Sridhar to Maintainers.
crypto: tcrypt - Remove unused poly1305 support
crypto: ansi_cprng - Remove unused ansi_cprng algorithm
crypto: asymmetric_keys - fix uninitialized pointers with free attribute
KEYS: Avoid -Wflex-array-member-not-at-end warning
crypto: ccree - Correctly handle return of sg_nents_for_len
crypto: starfive - Correctly handle return of sg_nents_for_len
crypto: iaa - Fix incorrect return value in save_iaa_wq()
crypto: zstd - Remove unnecessary size_t cast
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull 'at_least' array size update from Eric Biggers:
"C supports lower bounds on the sizes of array parameters, using the
static keyword as follows: 'void f(int a[static 32]);'. This allows
the compiler to warn about a too-small array being passed.
As discussed, this reuse of the 'static' keyword, while standard, is a
bit obscure. Therefore, add an alias 'at_least' to compiler_types.h.
Then, add this 'at_least' annotation to the array parameters of
various crypto library functions"
* tag 'libcrypto-at-least-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
lib/crypto: sha2: Add at_least decoration to fixed-size array params
lib/crypto: sha1: Add at_least decoration to fixed-size array params
lib/crypto: poly1305: Add at_least decoration to fixed-size array params
lib/crypto: md5: Add at_least decoration to fixed-size array params
lib/crypto: curve25519: Add at_least decoration to fixed-size array params
lib/crypto: chacha: Add at_least decoration to fixed-size array params
lib/crypto: chacha20poly1305: Statically check fixed array lengths
compiler_types: introduce at_least parameter decoration pseudo keyword
wifi: iwlwifi: trans: rename at_least variable to min_mode
|
|
Add the at_least (i.e. 'static') decoration to the fixed-size array
parameters of the sha2 library functions. This causes clang to warn
when a too-small array of known size is passed.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: "Jason A. Donenfeld" <Jason@zx2c4.com>
Link: https://lore.kernel.org/r/20251122194206.31822-7-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Add the at_least (i.e. 'static') decoration to the fixed-size array
parameters of the sha1 library functions. This causes clang to warn
when a too-small array of known size is passed.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: "Jason A. Donenfeld" <Jason@zx2c4.com>
Link: https://lore.kernel.org/r/20251122194206.31822-6-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Add the at_least (i.e. 'static') decoration to the fixed-size array
parameters of the poly1305 library functions. This causes clang to warn
when a too-small array of known size is passed.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: "Jason A. Donenfeld" <Jason@zx2c4.com>
Link: https://lore.kernel.org/r/20251122194206.31822-5-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Add the at_least (i.e. 'static') decoration to the fixed-size array
parameters of the md5 library functions. This causes clang to warn when
a too-small array of known size is passed.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: "Jason A. Donenfeld" <Jason@zx2c4.com>
Link: https://lore.kernel.org/r/20251122194206.31822-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Add the at_least (i.e. 'static') decoration to the fixed-size array
parameters of the curve25519 library functions. This causes clang to
warn when a too-small array of known size is passed.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: "Jason A. Donenfeld" <Jason@zx2c4.com>
Link: https://lore.kernel.org/r/20251122194206.31822-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Add the at_least (i.e. 'static') decoration to the fixed-size array
parameters of the chacha library functions. This causes clang to warn
when a too-small array of known size is passed.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: "Jason A. Donenfeld" <Jason@zx2c4.com>
Link: https://lore.kernel.org/r/20251122194206.31822-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Several parameters of the chacha20poly1305 functions require arrays of
an exact length. Use the new at_least keyword to instruct gcc and
clang to statically check that the caller is passing an object of at
least that length.
Here it is in action, with this faulty patch to wireguard's cookie.h:
struct cookie_checker {
u8 secret[NOISE_HASH_LEN];
- u8 cookie_encryption_key[NOISE_SYMMETRIC_KEY_LEN];
+ u8 cookie_encryption_key[NOISE_SYMMETRIC_KEY_LEN - 1];
u8 message_mac1_key[NOISE_SYMMETRIC_KEY_LEN];
If I try compiling this code, I get this helpful warning:
CC drivers/net/wireguard/cookie.o
drivers/net/wireguard/cookie.c: In function ‘wg_cookie_message_create’:
drivers/net/wireguard/cookie.c:193:9: warning: ‘xchacha20poly1305_encrypt’ reading 32 bytes from a region of size 31 [-Wstringop-overread]
193 | xchacha20poly1305_encrypt(dst->encrypted_cookie, cookie, COOKIE_LEN,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
194 | macs->mac1, COOKIE_LEN, dst->nonce,
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
195 | checker->cookie_encryption_key);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/wireguard/cookie.c:193:9: note: referencing argument 7 of type ‘const u8 *’ {aka ‘const unsigned char *’}
In file included from drivers/net/wireguard/messages.h:10,
from drivers/net/wireguard/cookie.h:9,
from drivers/net/wireguard/cookie.c:6:
include/crypto/chacha20poly1305.h:28:6: note: in a call to function ‘xchacha20poly1305_encrypt’
28 | void xchacha20poly1305_encrypt(u8 *dst, const u8 *src, const size_t src_len,
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: "Jason A. Donenfeld" <Jason@zx2c4.com>
Link: https://lore.kernel.org/r/20251123054819.2371989-4-Jason@zx2c4.com
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
This reverts commit 0f8d42bf128d349ad490e87d5574d211245e40f1, with the
memcpy_sglist() part dropped.
Now that memcpy_sglist() no longer uses the skcipher_walk code, the
skcipher_walk code can be moved back to where it belongs.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The original implementation of memcpy_sglist() was broken because it
didn't handle scatterlists that describe exactly the same memory, which
is a case that many callers rely on. The current implementation is
broken too because it calls the skcipher_walk functions which can fail.
It ignores any errors from those functions.
Fix it by replacing it with a new implementation written from scratch.
It always succeeds. It's also a bit faster, since it avoids the
overhead of skcipher_walk. skcipher_walk includes a lot of
functionality (such as alignmask handling) that's irrelevant here.
Reported-by: Colin Ian King <coking@nvidia.com>
Closes: https://lore.kernel.org/r/20251114122620.111623-1-coking@nvidia.com
Fixes: 131bdceca1f0 ("crypto: scatterwalk - Add memcpy_sglist")
Fixes: 0f8d42bf128d ("crypto: scatterwalk - Move skcipher walk and use it for memcpy_sglist")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Remove ansi_cprng, since it's obsolete and unused, as confirmed at
https://lore.kernel.org/r/aQxpnckYMgAAOLpZ@gondor.apana.org.au/
This was originally added in 2008, apparently as a FIPS approved random
number generator. Whether this has ever belonged upstream is
questionable. Either way, ansi_cprng is no longer usable for this
purpose, since it's been superseded by the more modern algorithms in
crypto/drbg.c, and FIPS itself no longer allows it. (NIST SP 800-131A
Rev 1 (2015) says that RNGs based on ANSI X9.31 will be disallowed after
2015. NIST SP 800-131A Rev 2 (2019) confirms they are now disallowed.)
Therefore, there is no reason to keep it around.
Suggested-by: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Haotian Zhang <vulab@iscas.ac.cn>
Cc: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Migrate the x86_64 implementation of POLYVAL into lib/crypto/, wiring it
up to the POLYVAL library interface. This makes the POLYVAL library be
properly optimized on x86_64.
This drops the x86_64 optimizations of polyval in the crypto_shash API.
That's fine, since polyval will be removed from crypto_shash entirely
since it is unneeded there. But even if it comes back, the crypto_shash
API could just be implemented on top of the library API, as usual.
Adjust the names and prototypes of the assembly functions to align more
closely with the rest of the library code.
Also replace a movaps instruction with movups to remove the assumption
that the key struct is 16-byte aligned. Users can still align the key
if they want (and at least in this case, movups is just as fast as
movaps), but it's inconvenient to require it.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251109234726.638437-6-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Migrate the arm64 implementation of POLYVAL into lib/crypto/, wiring it
up to the POLYVAL library interface. This makes the POLYVAL library be
properly optimized on arm64.
This drops the arm64 optimizations of polyval in the crypto_shash API.
That's fine, since polyval will be removed from crypto_shash entirely
since it is unneeded there. But even if it comes back, the crypto_shash
API could just be implemented on top of the library API, as usual.
Adjust the names and prototypes of the assembly functions to align more
closely with the rest of the library code.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251109234726.638437-5-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Add support for POLYVAL to lib/crypto/.
This will replace the polyval crypto_shash algorithm and its use in the
hctr2 template, simplifying the code and reducing overhead.
Specifically, this commit introduces the POLYVAL library API and a
generic implementation of it. Later commits will migrate the existing
architecture-optimized implementations of POLYVAL into lib/crypto/ and
add a KUnit test suite.
I've also rewritten the generic implementation completely, using a more
modern approach instead of the traditional table-based approach. It's
now constant-time, requires no precomputation or dynamic memory
allocations, decreases the per-key memory usage from 4096 bytes to 16
bytes, and is faster than the old polyval-generic even on bulk data
reusing the same key (at least on x86_64, where I measured 15% faster).
We should do this for GHASH too, but for now just do it for POLYVAL.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251109234726.638437-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Replace sha3_generic.c with a new file sha3.c which implements the SHA-3
crypto_shash algorithms on top of the SHA-3 library API.
Change the driver name suffix from "-generic" to "-lib" to reflect that
these algorithms now just use the (possibly arch-optimized) library.
This closely mirrors crypto/{md5,sha1,sha256,sha512,blake2b}.c.
Implement export_core and import_core, since crypto/hmac.c expects these
to be present. (Note that there is no security purpose in wrapping
SHA-3 with HMAC. HMAC was designed for older algorithms that don't
resist length extension attacks. But since someone could be using
"hmac(sha3-*)" via crypto_shash anyway, keep supporting it for now.)
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Harald Freudenberger <freude@linux.ibm.com>
Link: https://lore.kernel.org/r/20251026055032.1413733-15-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Add SHA-3 support to lib/crypto/. All six algorithms in the SHA-3
family are supported: four digests (SHA3-224, SHA3-256, SHA3-384, and
SHA3-512) and two extendable-output functions (SHAKE128 and SHAKE256).
The SHAKE algorithms will be required for ML-DSA.
[EB: simplified the API to use fewer types and functions, fixed bug that
sometimes caused incorrect SHAKE output, cleaned up the
documentation, dropped an ad-hoc test that was inconsistent with
the rest of lib/crypto/, and many other cleanups]
Signed-off-by: David Howells <dhowells@redhat.com>
Co-developed-by: Eric Biggers <ebiggers@kernel.org>
Tested-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251026055032.1413733-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
This patch introduces infrastructure for allocating req objects on the
stack for AEADs. The additions mirror the existing sync skcipher APIs.
This can be used in cases where simple sync AEAD operations are being
done. So allocating the request on stack avoides possible out-of-memory
errors.
The struct crypto_sync_aead is a wrapper around crypto_aead and should
be used in its place when sync only requests will be done on the stack.
Correspondingly, the request should be allocated with
SYNC_AEAD_REQUEST_ON_STACK().
Similar to sync_skcipher APIs, the new sync_aead APIs are wrappers
around the regular aead APIs to facilitate sync only operations. The
following crypto APIs are added:
- struct crypto_sync_aead
- crypto_alloc_sync_aead()
- crypto_free_sync_aead()
- crypto_aync_aead_tfm()
- crypto_sync_aead_setkey()
- crypto_sync_aead_setauthsize()
- crypto_sync_aead_authsize()
- crypto_sync_aead_maxauthsize()
- crypto_sync_aead_ivsize()
- crypto_sync_aead_blocksize()
- crypto_sync_aead_get_flags()
- crypto_sync_aead_set_flags()
- crypto_sync_aead_clear_flags()
- crypto_sync_aead_reqtfm()
- aead_request_set_sync_tfm()
- SYNC_AEAD_REQUEST_ON_STACK()
Signed-off-by: T Pratham <t-pratham@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Replace blake2b_generic.c with a new file blake2b.c which implements the
BLAKE2b crypto_shash algorithms on top of the BLAKE2b library API.
Change the driver name suffix from "-generic" to "-lib" to reflect that
these algorithms now just use the (possibly arch-optimized) library.
This closely mirrors crypto/{md5,sha1,sha256,sha512}.c.
Remove include/crypto/internal/blake2b.h since it is no longer used.
Likewise, remove struct blake2b_state from include/crypto/blake2b.h.
Omit support for import_core and export_core, since there are no legacy
drivers that need these for these algorithms.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251018043106.375964-10-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Add a library API for BLAKE2b, closely modeled after the BLAKE2s API.
This will allow in-kernel users such as btrfs to use BLAKE2b without
going through the generic crypto layer. In addition, as usual the
BLAKE2b crypto_shash algorithms will be reimplemented on top of this.
Note: to create lib/crypto/blake2b.c I made a copy of
lib/crypto/blake2s.c and made the updates from BLAKE2s => BLAKE2b. This
way, the BLAKE2s and BLAKE2b code is kept consistent. Therefore, it
borrows the SPDX-License-Identifier and Copyright from
lib/crypto/blake2s.c rather than crypto/blake2b_generic.c.
The library API uses 'struct blake2b_ctx', consistent with other
lib/crypto/ APIs. The existing 'struct blake2b_state' will be removed
once the blake2b crypto_shash algorithms are updated to stop using it.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251018043106.375964-7-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Add kerneldoc for the BLAKE2s library API.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251018043106.375964-5-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
A couple more small cleanups to the BLAKE2s code before these things get
propagated into the BLAKE2b code:
- Drop 'const' from some non-pointer function parameters. It was a bit
excessive and not conventional.
- Rename 'block' argument of blake2s_compress*() to 'data'. This is for
consistency with the SHA-* code, and also to avoid the implication
that it points to a singular "block".
No functional changes.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251018043106.375964-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
For consistency with the SHA-1, SHA-2, SHA-3 (in development), and MD5
library APIs, rename blake2s_state to blake2s_ctx.
As a refresher, the ctx name:
- Is a bit shorter.
- Avoids confusion with the compression function state, which is also
often called the state (but is just part of the full context).
- Is consistent with OpenSSL.
Not a big deal, of course. But consistency is nice. With a BLAKE2b
library API about to be added, this is a convenient time to update this.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251018043106.375964-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Reorder the parameters of blake2s() from (out, in, key, outlen, inlen,
keylen) to (key, keylen, in, inlen, out, outlen).
This aligns BLAKE2s with the common conventions of pairing buffers and
their lengths, and having outputs follow inputs. This is widely used
elsewhere in lib/crypto/ and crypto/, and even elsewhere in the BLAKE2s
code itself such as blake2s_init_key() and blake2s_final(). So
blake2s() was a bit of an exception.
Notably, this results in the same order as hmac_*_usingrawkey().
Note that since the type signature changed, it's not possible for a
blake2s() call site to be silently missed.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251018043106.375964-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Replace aes used in drbg with library calls.
Signed-off-by: Harsh Jain <h.jain@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Export drbg_ctr_df() derivative function to new module df_sp80090.
Signed-off-by: Harsh Jain <h.jain@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
