| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull io_uring fixes from Jens Axboe:
- fix for async buffered reads if read-ahead is fully disabled (Hao)
- double poll match fix
- ->show_fdinfo() potential ABBA deadlock complaint fix
* tag 'io_uring-5.9-2020-10-02' of git://git.kernel.dk/linux-block:
io_uring: fix async buffered reads when readahead is disabled
io_uring: fix potential ABBA deadlock in ->show_fdinfo()
io_uring: always delete double poll wait entry on match
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull epoll fixes from Al Viro:
"Several race fixes in epoll"
* 'work.epoll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
ep_create_wakeup_source(): dentry name can change under you...
epoll: EPOLL_CTL_ADD: close the race in decision to take fast path
epoll: replace ->visited/visited_list with generation count
epoll: do not insert into poll queues until all sanity checks are done
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"Two more fixes.
One is for a lockdep warning/lockup (also caught by syzbot), that one
has been seen in practice. Regarding the other syzbot reports
mentioned last time, they don't seem to be urgent and reliably
reproducible so they'll be fixed later.
The second fix is for a potential corruption when device replace
finishes and the in-memory state of trim is not copied to the new
device"
* tag 'for-5.9-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix filesystem corruption after a device replace
btrfs: move btrfs_rm_dev_replace_free_srcdev outside of all locks
btrfs: move btrfs_scratch_superblocks into btrfs_dev_replace_finishing
|
|
The pipe splice code still used the old model of waiting for pipe IO by
using a non-specific "pipe_wait()" that waited for any pipe event to
happen, which depended on all pipe IO being entirely serialized by the
pipe lock. So by checking the state you were waiting for, and then
adding yourself to the wait queue before dropping the lock, you were
guaranteed to see all the wakeups.
Strictly speaking, the actual wakeups were not done under the lock, but
the pipe_wait() model still worked, because since the waiter held the
lock when checking whether it should sleep, it would always see the
current state, and the wakeup was always done after updating the state.
However, commit 0ddad21d3e99 ("pipe: use exclusive waits when reading or
writing") split the single wait-queue into two, and in the process also
made the "wait for event" code wait for _two_ wait queues, and that then
showed a race with the wakers that were not serialized by the pipe lock.
It's only splice that used that "pipe_wait()" model, so the problem
wasn't obvious, but Josef Bacik reports:
"I hit a hang with fstest btrfs/187, which does a btrfs send into
/dev/null. This works by creating a pipe, the write side is given to
the kernel to write into, and the read side is handed to a thread that
splices into a file, in this case /dev/null.
The box that was hung had the write side stuck here [pipe_write] and
the read side stuck here [splice_from_pipe_next -> pipe_wait].
[ more details about pipe_wait() scenario ]
The problem is we're doing the prepare_to_wait, which sets our state
each time, however we can be woken up either with reads or writes. In
the case above we race with the WRITER waking us up, and re-set our
state to INTERRUPTIBLE, and thus never break out of schedule"
Josef had a patch that avoided the issue in pipe_wait() by just making
it set the state only once, but the deeper problem is that pipe_wait()
depends on a level of synchonization by the pipe mutex that it really
shouldn't. And the whole "wait for any pipe state change" model really
isn't very good to begin with.
So rather than trying to work around things in pipe_wait(), remove that
legacy model of "wait for arbitrary pipe event" entirely, and actually
create functions that wait for the pipe actually being readable or
writable, and can do so without depending on the pipe lock serializing
everything.
Fixes: 0ddad21d3e99 ("pipe: use exclusive waits when reading or writing")
Link: https://lore.kernel.org/linux-fsdevel/bfa88b5ad6f069b2b679316b9e495a970130416c.1601567868.git.josef@toxicpanda.com/
Reported-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-and-tested-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We use a device's allocation state tree to track ranges in a device used
for allocated chunks, and we set ranges in this tree when allocating a new
chunk. However after a device replace operation, we were not setting the
allocated ranges in the new device's allocation state tree, so that tree
is empty after a device replace.
This means that a fitrim operation after a device replace will trim the
device ranges that have allocated chunks and extents, as we trim every
range for which there is not a range marked in the device's allocation
state tree. It is also important during chunk allocation, since the
device's allocation state is used to determine if a range is already
allocated when allocating a new chunk.
This is trivial to reproduce and the following script triggers the bug:
$ cat reproducer.sh
#!/bin/bash
DEV1="/dev/sdg"
DEV2="/dev/sdh"
DEV3="/dev/sdi"
wipefs -a $DEV1 $DEV2 $DEV3 &> /dev/null
# Create a raid1 test fs on 2 devices.
mkfs.btrfs -f -m raid1 -d raid1 $DEV1 $DEV2 > /dev/null
mount $DEV1 /mnt/btrfs
xfs_io -f -c "pwrite -S 0xab 0 10M" /mnt/btrfs/foo
echo "Starting to replace $DEV1 with $DEV3"
btrfs replace start -B $DEV1 $DEV3 /mnt/btrfs
echo
echo "Running fstrim"
fstrim /mnt/btrfs
echo
echo "Unmounting filesystem"
umount /mnt/btrfs
echo "Mounting filesystem in degraded mode using $DEV3 only"
wipefs -a $DEV1 $DEV2 &> /dev/null
mount -o degraded $DEV3 /mnt/btrfs
if [ $? -ne 0 ]; then
dmesg | tail
echo
echo "Failed to mount in degraded mode"
exit 1
fi
echo
echo "File foo data (expected all bytes = 0xab):"
od -A d -t x1 /mnt/btrfs/foo
umount /mnt/btrfs
When running the reproducer:
$ ./replace-test.sh
wrote 10485760/10485760 bytes at offset 0
10 MiB, 2560 ops; 0.0901 sec (110.877 MiB/sec and 28384.5216 ops/sec)
Starting to replace /dev/sdg with /dev/sdi
Running fstrim
Unmounting filesystem
Mounting filesystem in degraded mode using /dev/sdi only
mount: /mnt/btrfs: wrong fs type, bad option, bad superblock on /dev/sdi, missing codepage or helper program, or other error.
[19581.748641] BTRFS info (device sdg): dev_replace from /dev/sdg (devid 1) to /dev/sdi started
[19581.803842] BTRFS info (device sdg): dev_replace from /dev/sdg (devid 1) to /dev/sdi finished
[19582.208293] BTRFS info (device sdi): allowing degraded mounts
[19582.208298] BTRFS info (device sdi): disk space caching is enabled
[19582.208301] BTRFS info (device sdi): has skinny extents
[19582.212853] BTRFS warning (device sdi): devid 2 uuid 1f731f47-e1bb-4f00-bfbb-9e5a0cb4ba9f is missing
[19582.213904] btree_readpage_end_io_hook: 25839 callbacks suppressed
[19582.213907] BTRFS error (device sdi): bad tree block start, want 30490624 have 0
[19582.214780] BTRFS warning (device sdi): failed to read root (objectid=7): -5
[19582.231576] BTRFS error (device sdi): open_ctree failed
Failed to mount in degraded mode
So fix by setting all allocated ranges in the replace target device when
the replace operation is finishing, when we are holding the chunk mutex
and we can not race with new chunk allocations.
A test case for fstests follows soon.
Fixes: 1c11b63eff2a67 ("btrfs: replace pending/pinned chunks lists with io tree")
CC: stable@vger.kernel.org # 5.2+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When closing and freeing the source device we could end up doing our
final blkdev_put() on the bdev, which will grab the bd_mutex. As such
we want to be holding as few locks as possible, so move this call
outside of the dev_replace->lock_finishing_cancel_unmount lock. Since
we're modifying the fs_devices we need to make sure we're holding the
uuid_mutex here, so take that as well.
There's a report from syzbot probably hitting one of the cases where
the bd_mutex and device_list_mutex are taken in the wrong order, however
it's not with device replace, like this patch fixes. As there's no
reproducer available so far, we can't verify the fix.
https://lore.kernel.org/lkml/000000000000fc04d105afcf86d7@google.com/
dashboard link: https://syzkaller.appspot.com/bug?extid=84a0634dc5d21d488419
WARNING: possible circular locking dependency detected
5.9.0-rc5-syzkaller #0 Not tainted
------------------------------------------------------
syz-executor.0/6878 is trying to acquire lock:
ffff88804c17d780 (&bdev->bd_mutex){+.+.}-{3:3}, at: blkdev_put+0x30/0x520 fs/block_dev.c:1804
but task is already holding lock:
ffff8880908cfce0 (&fs_devs->device_list_mutex){+.+.}-{3:3}, at: close_fs_devices.part.0+0x2e/0x800 fs/btrfs/volumes.c:1159
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #4 (&fs_devs->device_list_mutex){+.+.}-{3:3}:
__mutex_lock_common kernel/locking/mutex.c:956 [inline]
__mutex_lock+0x134/0x10e0 kernel/locking/mutex.c:1103
btrfs_finish_chunk_alloc+0x281/0xf90 fs/btrfs/volumes.c:5255
btrfs_create_pending_block_groups+0x2f3/0x700 fs/btrfs/block-group.c:2109
__btrfs_end_transaction+0xf5/0x690 fs/btrfs/transaction.c:916
find_free_extent_update_loop fs/btrfs/extent-tree.c:3807 [inline]
find_free_extent+0x23b7/0x2e60 fs/btrfs/extent-tree.c:4127
btrfs_reserve_extent+0x166/0x460 fs/btrfs/extent-tree.c:4206
cow_file_range+0x3de/0x9b0 fs/btrfs/inode.c:1063
btrfs_run_delalloc_range+0x2cf/0x1410 fs/btrfs/inode.c:1838
writepage_delalloc+0x150/0x460 fs/btrfs/extent_io.c:3439
__extent_writepage+0x441/0xd00 fs/btrfs/extent_io.c:3653
extent_write_cache_pages.constprop.0+0x69d/0x1040 fs/btrfs/extent_io.c:4249
extent_writepages+0xcd/0x2b0 fs/btrfs/extent_io.c:4370
do_writepages+0xec/0x290 mm/page-writeback.c:2352
__writeback_single_inode+0x125/0x1400 fs/fs-writeback.c:1461
writeback_sb_inodes+0x53d/0xf40 fs/fs-writeback.c:1721
wb_writeback+0x2ad/0xd40 fs/fs-writeback.c:1894
wb_do_writeback fs/fs-writeback.c:2039 [inline]
wb_workfn+0x2dc/0x13e0 fs/fs-writeback.c:2080
process_one_work+0x94c/0x1670 kernel/workqueue.c:2269
worker_thread+0x64c/0x1120 kernel/workqueue.c:2415
kthread+0x3b5/0x4a0 kernel/kthread.c:292
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:294
-> #3 (sb_internal#2){.+.+}-{0:0}:
percpu_down_read include/linux/percpu-rwsem.h:51 [inline]
__sb_start_write+0x234/0x470 fs/super.c:1672
sb_start_intwrite include/linux/fs.h:1690 [inline]
start_transaction+0xbe7/0x1170 fs/btrfs/transaction.c:624
find_free_extent_update_loop fs/btrfs/extent-tree.c:3789 [inline]
find_free_extent+0x25e1/0x2e60 fs/btrfs/extent-tree.c:4127
btrfs_reserve_extent+0x166/0x460 fs/btrfs/extent-tree.c:4206
cow_file_range+0x3de/0x9b0 fs/btrfs/inode.c:1063
btrfs_run_delalloc_range+0x2cf/0x1410 fs/btrfs/inode.c:1838
writepage_delalloc+0x150/0x460 fs/btrfs/extent_io.c:3439
__extent_writepage+0x441/0xd00 fs/btrfs/extent_io.c:3653
extent_write_cache_pages.constprop.0+0x69d/0x1040 fs/btrfs/extent_io.c:4249
extent_writepages+0xcd/0x2b0 fs/btrfs/extent_io.c:4370
do_writepages+0xec/0x290 mm/page-writeback.c:2352
__writeback_single_inode+0x125/0x1400 fs/fs-writeback.c:1461
writeback_sb_inodes+0x53d/0xf40 fs/fs-writeback.c:1721
wb_writeback+0x2ad/0xd40 fs/fs-writeback.c:1894
wb_do_writeback fs/fs-writeback.c:2039 [inline]
wb_workfn+0x2dc/0x13e0 fs/fs-writeback.c:2080
process_one_work+0x94c/0x1670 kernel/workqueue.c:2269
worker_thread+0x64c/0x1120 kernel/workqueue.c:2415
kthread+0x3b5/0x4a0 kernel/kthread.c:292
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:294
-> #2 ((work_completion)(&(&wb->dwork)->work)){+.+.}-{0:0}:
__flush_work+0x60e/0xac0 kernel/workqueue.c:3041
wb_shutdown+0x180/0x220 mm/backing-dev.c:355
bdi_unregister+0x174/0x590 mm/backing-dev.c:872
del_gendisk+0x820/0xa10 block/genhd.c:933
loop_remove drivers/block/loop.c:2192 [inline]
loop_control_ioctl drivers/block/loop.c:2291 [inline]
loop_control_ioctl+0x3b1/0x480 drivers/block/loop.c:2257
vfs_ioctl fs/ioctl.c:48 [inline]
__do_sys_ioctl fs/ioctl.c:753 [inline]
__se_sys_ioctl fs/ioctl.c:739 [inline]
__x64_sys_ioctl+0x193/0x200 fs/ioctl.c:739
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
-> #1 (loop_ctl_mutex){+.+.}-{3:3}:
__mutex_lock_common kernel/locking/mutex.c:956 [inline]
__mutex_lock+0x134/0x10e0 kernel/locking/mutex.c:1103
lo_open+0x19/0xd0 drivers/block/loop.c:1893
__blkdev_get+0x759/0x1aa0 fs/block_dev.c:1507
blkdev_get fs/block_dev.c:1639 [inline]
blkdev_open+0x227/0x300 fs/block_dev.c:1753
do_dentry_open+0x4b9/0x11b0 fs/open.c:817
do_open fs/namei.c:3251 [inline]
path_openat+0x1b9a/0x2730 fs/namei.c:3368
do_filp_open+0x17e/0x3c0 fs/namei.c:3395
do_sys_openat2+0x16d/0x420 fs/open.c:1168
do_sys_open fs/open.c:1184 [inline]
__do_sys_open fs/open.c:1192 [inline]
__se_sys_open fs/open.c:1188 [inline]
__x64_sys_open+0x119/0x1c0 fs/open.c:1188
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
-> #0 (&bdev->bd_mutex){+.+.}-{3:3}:
check_prev_add kernel/locking/lockdep.c:2496 [inline]
check_prevs_add kernel/locking/lockdep.c:2601 [inline]
validate_chain kernel/locking/lockdep.c:3218 [inline]
__lock_acquire+0x2a96/0x5780 kernel/locking/lockdep.c:4426
lock_acquire+0x1f3/0xae0 kernel/locking/lockdep.c:5006
__mutex_lock_common kernel/locking/mutex.c:956 [inline]
__mutex_lock+0x134/0x10e0 kernel/locking/mutex.c:1103
blkdev_put+0x30/0x520 fs/block_dev.c:1804
btrfs_close_bdev fs/btrfs/volumes.c:1117 [inline]
btrfs_close_bdev fs/btrfs/volumes.c:1107 [inline]
btrfs_close_one_device fs/btrfs/volumes.c:1133 [inline]
close_fs_devices.part.0+0x1a4/0x800 fs/btrfs/volumes.c:1161
close_fs_devices fs/btrfs/volumes.c:1193 [inline]
btrfs_close_devices+0x95/0x1f0 fs/btrfs/volumes.c:1179
close_ctree+0x688/0x6cb fs/btrfs/disk-io.c:4149
generic_shutdown_super+0x144/0x370 fs/super.c:464
kill_anon_super+0x36/0x60 fs/super.c:1108
btrfs_kill_super+0x38/0x50 fs/btrfs/super.c:2265
deactivate_locked_super+0x94/0x160 fs/super.c:335
deactivate_super+0xad/0xd0 fs/super.c:366
cleanup_mnt+0x3a3/0x530 fs/namespace.c:1118
task_work_run+0xdd/0x190 kernel/task_work.c:141
tracehook_notify_resume include/linux/tracehook.h:188 [inline]
exit_to_user_mode_loop kernel/entry/common.c:163 [inline]
exit_to_user_mode_prepare+0x1e1/0x200 kernel/entry/common.c:190
syscall_exit_to_user_mode+0x7e/0x2e0 kernel/entry/common.c:265
entry_SYSCALL_64_after_hwframe+0x44/0xa9
other info that might help us debug this:
Chain exists of:
&bdev->bd_mutex --> sb_internal#2 --> &fs_devs->device_list_mutex
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&fs_devs->device_list_mutex);
lock(sb_internal#2);
lock(&fs_devs->device_list_mutex);
lock(&bdev->bd_mutex);
*** DEADLOCK ***
3 locks held by syz-executor.0/6878:
#0: ffff88809070c0e0 (&type->s_umount_key#70){++++}-{3:3}, at: deactivate_super+0xa5/0xd0 fs/super.c:365
#1: ffffffff8a5b37a8 (uuid_mutex){+.+.}-{3:3}, at: btrfs_close_devices+0x23/0x1f0 fs/btrfs/volumes.c:1178
#2: ffff8880908cfce0 (&fs_devs->device_list_mutex){+.+.}-{3:3}, at: close_fs_devices.part.0+0x2e/0x800 fs/btrfs/volumes.c:1159
stack backtrace:
CPU: 0 PID: 6878 Comm: syz-executor.0 Not tainted 5.9.0-rc5-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x198/0x1fd lib/dump_stack.c:118
check_noncircular+0x324/0x3e0 kernel/locking/lockdep.c:1827
check_prev_add kernel/locking/lockdep.c:2496 [inline]
check_prevs_add kernel/locking/lockdep.c:2601 [inline]
validate_chain kernel/locking/lockdep.c:3218 [inline]
__lock_acquire+0x2a96/0x5780 kernel/locking/lockdep.c:4426
lock_acquire+0x1f3/0xae0 kernel/locking/lockdep.c:5006
__mutex_lock_common kernel/locking/mutex.c:956 [inline]
__mutex_lock+0x134/0x10e0 kernel/locking/mutex.c:1103
blkdev_put+0x30/0x520 fs/block_dev.c:1804
btrfs_close_bdev fs/btrfs/volumes.c:1117 [inline]
btrfs_close_bdev fs/btrfs/volumes.c:1107 [inline]
btrfs_close_one_device fs/btrfs/volumes.c:1133 [inline]
close_fs_devices.part.0+0x1a4/0x800 fs/btrfs/volumes.c:1161
close_fs_devices fs/btrfs/volumes.c:1193 [inline]
btrfs_close_devices+0x95/0x1f0 fs/btrfs/volumes.c:1179
close_ctree+0x688/0x6cb fs/btrfs/disk-io.c:4149
generic_shutdown_super+0x144/0x370 fs/super.c:464
kill_anon_super+0x36/0x60 fs/super.c:1108
btrfs_kill_super+0x38/0x50 fs/btrfs/super.c:2265
deactivate_locked_super+0x94/0x160 fs/super.c:335
deactivate_super+0xad/0xd0 fs/super.c:366
cleanup_mnt+0x3a3/0x530 fs/namespace.c:1118
task_work_run+0xdd/0x190 kernel/task_work.c:141
tracehook_notify_resume include/linux/tracehook.h:188 [inline]
exit_to_user_mode_loop kernel/entry/common.c:163 [inline]
exit_to_user_mode_prepare+0x1e1/0x200 kernel/entry/common.c:190
syscall_exit_to_user_mode+0x7e/0x2e0 kernel/entry/common.c:265
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x460027
RSP: 002b:00007fff59216328 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6
RAX: 0000000000000000 RBX: 0000000000076035 RCX: 0000000000460027
RDX: 0000000000403188 RSI: 0000000000000002 RDI: 00007fff592163d0
RBP: 0000000000000333 R08: 0000000000000000 R09: 000000000000000b
R10: 0000000000000005 R11: 0000000000000246 R12: 00007fff59217460
R13: 0000000002df2a60 R14: 0000000000000000 R15: 00007fff59217460
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
[ add syzbot reference ]
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
autofs got broken in some configurations by commit 13c164b1a186
("autofs: switch to kernel_write") because there is now an extra LSM
permission check done by security_file_permission() in rw_verify_area().
autofs is one if the few places that really does want the much more
limited __kernel_write(), because the write is an internal kernel one
that shouldn't do any user permission checks (it also doesn't need the
file_start_write/file_end_write logic, since it's just a pipe).
There are a couple of other cases like that - accounting, core dumping,
and splice - but autofs stands out because it can be built as a module.
As a result, we need to export this internal __kernel_write() function
again.
We really don't want any other module to use this, but we don't have a
"EXPORT_SYMBOL_FOR_AUTOFS_ONLY()". But we can mark it GPL-only to at
least approximate that "internal use only" for licensing.
While in this area, make autofs pass in NULL for the file position
pointer, since it's always a pipe, and we now use a NULL file pointer
for streaming file descriptors (see file_ppos() and commit 438ab720c675:
"vfs: pass ppos=NULL to .read()/.write() of FMODE_STREAM files")
This effectively reverts commits 9db977522449 ("fs: unexport
__kernel_write") and 13c164b1a186 ("autofs: switch to kernel_write").
Fixes: 13c164b1a186 ("autofs: switch to kernel_write")
Reported-by: Ondrej Mosnacek <omosnace@redhat.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: Acked-by: Ian Kent <raven@themaw.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The async buffered reads feature is not working when readahead is
turned off. There are two things to concern:
- when doing retry in io_read, not only the IOCB_WAITQ flag but also
the IOCB_NOWAIT flag is still set, which makes it goes to would_block
phase in generic_file_buffered_read() and then return -EAGAIN. After
that, the io-wq thread work is queued, and later doing the async
reads in the old way.
- even if we remove IOCB_NOWAIT when doing retry, the feature is still
not running properly, since in generic_file_buffered_read() it goes to
lock_page_killable() after calling mapping->a_ops->readpage() to do
IO, and thus causing process to sleep.
Fixes: 1a0a7853b901 ("mm: support async buffered reads in generic_file_buffered_read()")
Fixes: 3b2a4439e0ae ("io_uring: get rid of kiocb_wait_page_queue_init()")
Signed-off-by: Hao Xu <haoxu@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull NFS client bugfixes from Trond Myklebust:
"Highlights include:
- NFSv4.2: copy_file_range needs to invalidate caches on success
- NFSv4.2: Fix security label length not being reset
- pNFS/flexfiles: Ensure we initialise the mirror bsizes correctly
on read
- pNFS/flexfiles: Fix signed/unsigned type issues with mirror
indices"
* tag 'nfs-for-5.9-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
pNFS/flexfiles: Be consistent about mirror index types
pNFS/flexfiles: Ensure we initialise the mirror bsizes correctly on read
NFSv4.2: fix client's attribute cache management for copy_file_range
nfs: Fix security label length not being reset
|
|
syzbot reports a potential lock deadlock between the normal IO path and
->show_fdinfo():
======================================================
WARNING: possible circular locking dependency detected
5.9.0-rc6-syzkaller #0 Not tainted
------------------------------------------------------
syz-executor.2/19710 is trying to acquire lock:
ffff888098ddc450 (sb_writers#4){.+.+}-{0:0}, at: io_write+0x6b5/0xb30 fs/io_uring.c:3296
but task is already holding lock:
ffff8880a11b8428 (&ctx->uring_lock){+.+.}-{3:3}, at: __do_sys_io_uring_enter+0xe9a/0x1bd0 fs/io_uring.c:8348
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (&ctx->uring_lock){+.+.}-{3:3}:
__mutex_lock_common kernel/locking/mutex.c:956 [inline]
__mutex_lock+0x134/0x10e0 kernel/locking/mutex.c:1103
__io_uring_show_fdinfo fs/io_uring.c:8417 [inline]
io_uring_show_fdinfo+0x194/0xc70 fs/io_uring.c:8460
seq_show+0x4a8/0x700 fs/proc/fd.c:65
seq_read+0x432/0x1070 fs/seq_file.c:208
do_loop_readv_writev fs/read_write.c:734 [inline]
do_loop_readv_writev fs/read_write.c:721 [inline]
do_iter_read+0x48e/0x6e0 fs/read_write.c:955
vfs_readv+0xe5/0x150 fs/read_write.c:1073
kernel_readv fs/splice.c:355 [inline]
default_file_splice_read.constprop.0+0x4e6/0x9e0 fs/splice.c:412
do_splice_to+0x137/0x170 fs/splice.c:871
splice_direct_to_actor+0x307/0x980 fs/splice.c:950
do_splice_direct+0x1b3/0x280 fs/splice.c:1059
do_sendfile+0x55f/0xd40 fs/read_write.c:1540
__do_sys_sendfile64 fs/read_write.c:1601 [inline]
__se_sys_sendfile64 fs/read_write.c:1587 [inline]
__x64_sys_sendfile64+0x1cc/0x210 fs/read_write.c:1587
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
-> #1 (&p->lock){+.+.}-{3:3}:
__mutex_lock_common kernel/locking/mutex.c:956 [inline]
__mutex_lock+0x134/0x10e0 kernel/locking/mutex.c:1103
seq_read+0x61/0x1070 fs/seq_file.c:155
pde_read fs/proc/inode.c:306 [inline]
proc_reg_read+0x221/0x300 fs/proc/inode.c:318
do_loop_readv_writev fs/read_write.c:734 [inline]
do_loop_readv_writev fs/read_write.c:721 [inline]
do_iter_read+0x48e/0x6e0 fs/read_write.c:955
vfs_readv+0xe5/0x150 fs/read_write.c:1073
kernel_readv fs/splice.c:355 [inline]
default_file_splice_read.constprop.0+0x4e6/0x9e0 fs/splice.c:412
do_splice_to+0x137/0x170 fs/splice.c:871
splice_direct_to_actor+0x307/0x980 fs/splice.c:950
do_splice_direct+0x1b3/0x280 fs/splice.c:1059
do_sendfile+0x55f/0xd40 fs/read_write.c:1540
__do_sys_sendfile64 fs/read_write.c:1601 [inline]
__se_sys_sendfile64 fs/read_write.c:1587 [inline]
__x64_sys_sendfile64+0x1cc/0x210 fs/read_write.c:1587
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
-> #0 (sb_writers#4){.+.+}-{0:0}:
check_prev_add kernel/locking/lockdep.c:2496 [inline]
check_prevs_add kernel/locking/lockdep.c:2601 [inline]
validate_chain kernel/locking/lockdep.c:3218 [inline]
__lock_acquire+0x2a96/0x5780 kernel/locking/lockdep.c:4441
lock_acquire+0x1f3/0xaf0 kernel/locking/lockdep.c:5029
percpu_down_read include/linux/percpu-rwsem.h:51 [inline]
__sb_start_write+0x228/0x450 fs/super.c:1672
io_write+0x6b5/0xb30 fs/io_uring.c:3296
io_issue_sqe+0x18f/0x5c50 fs/io_uring.c:5719
__io_queue_sqe+0x280/0x1160 fs/io_uring.c:6175
io_queue_sqe+0x692/0xfa0 fs/io_uring.c:6254
io_submit_sqe fs/io_uring.c:6324 [inline]
io_submit_sqes+0x1761/0x2400 fs/io_uring.c:6521
__do_sys_io_uring_enter+0xeac/0x1bd0 fs/io_uring.c:8349
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
other info that might help us debug this:
Chain exists of:
sb_writers#4 --> &p->lock --> &ctx->uring_lock
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&ctx->uring_lock);
lock(&p->lock);
lock(&ctx->uring_lock);
lock(sb_writers#4);
*** DEADLOCK ***
1 lock held by syz-executor.2/19710:
#0: ffff8880a11b8428 (&ctx->uring_lock){+.+.}-{3:3}, at: __do_sys_io_uring_enter+0xe9a/0x1bd0 fs/io_uring.c:8348
stack backtrace:
CPU: 0 PID: 19710 Comm: syz-executor.2 Not tainted 5.9.0-rc6-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x198/0x1fd lib/dump_stack.c:118
check_noncircular+0x324/0x3e0 kernel/locking/lockdep.c:1827
check_prev_add kernel/locking/lockdep.c:2496 [inline]
check_prevs_add kernel/locking/lockdep.c:2601 [inline]
validate_chain kernel/locking/lockdep.c:3218 [inline]
__lock_acquire+0x2a96/0x5780 kernel/locking/lockdep.c:4441
lock_acquire+0x1f3/0xaf0 kernel/locking/lockdep.c:5029
percpu_down_read include/linux/percpu-rwsem.h:51 [inline]
__sb_start_write+0x228/0x450 fs/super.c:1672
io_write+0x6b5/0xb30 fs/io_uring.c:3296
io_issue_sqe+0x18f/0x5c50 fs/io_uring.c:5719
__io_queue_sqe+0x280/0x1160 fs/io_uring.c:6175
io_queue_sqe+0x692/0xfa0 fs/io_uring.c:6254
io_submit_sqe fs/io_uring.c:6324 [inline]
io_submit_sqes+0x1761/0x2400 fs/io_uring.c:6521
__do_sys_io_uring_enter+0xeac/0x1bd0 fs/io_uring.c:8349
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x45e179
Code: 3d b2 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 0b b2 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f1194e74c78 EFLAGS: 00000246 ORIG_RAX: 00000000000001aa
RAX: ffffffffffffffda RBX: 00000000000082c0 RCX: 000000000045e179
RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000004
RBP: 000000000118cf98 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 000000000118cf4c
R13: 00007ffd1aa5756f R14: 00007f1194e759c0 R15: 000000000118cf4c
Fix this by just not diving into details if we fail to trylock the
io_uring mutex. We know the ctx isn't going away during this operation,
but we cannot safely iterate buffers/files/personalities if we don't
hold the io_uring mutex.
Reported-by: syzbot+2f8fa4e860edc3066aba@syzkaller.appspotmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
syzbot reports a crash with tty polling, which is using the double poll
handling:
general protection fault, probably for non-canonical address 0xdffffc0000000009: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000048-0x000000000000004f]
CPU: 0 PID: 6874 Comm: syz-executor749 Not tainted 5.9.0-rc6-next-20200924-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:io_poll_get_single fs/io_uring.c:4778 [inline]
RIP: 0010:io_poll_double_wake+0x51/0x510 fs/io_uring.c:4845
Code: fc ff df 48 c1 ea 03 80 3c 02 00 0f 85 9e 03 00 00 48 b8 00 00 00 00 00 fc ff df 49 8b 5d 08 48 8d 7b 48 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 06 0f 8e 63 03 00 00 0f b6 6b 48 bf 06 00 00
RSP: 0018:ffffc90001c1fb70 EFLAGS: 00010006
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000004
RDX: 0000000000000009 RSI: ffffffff81d9b3ad RDI: 0000000000000048
RBP: dffffc0000000000 R08: ffff8880a3cac798 R09: ffffc90001c1fc60
R10: fffff52000383f73 R11: 0000000000000000 R12: 0000000000000004
R13: ffff8880a3cac798 R14: ffff8880a3cac7a0 R15: 0000000000000004
FS: 0000000001f98880(0000) GS:ffff8880ae400000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f18886916c0 CR3: 0000000094c5a000 CR4: 00000000001506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
__wake_up_common+0x147/0x650 kernel/sched/wait.c:93
__wake_up_common_lock+0xd0/0x130 kernel/sched/wait.c:123
tty_ldisc_hangup+0x1cf/0x680 drivers/tty/tty_ldisc.c:735
__tty_hangup.part.0+0x403/0x870 drivers/tty/tty_io.c:625
__tty_hangup drivers/tty/tty_io.c:575 [inline]
tty_vhangup+0x1d/0x30 drivers/tty/tty_io.c:698
pty_close+0x3f5/0x550 drivers/tty/pty.c:79
tty_release+0x455/0xf60 drivers/tty/tty_io.c:1679
__fput+0x285/0x920 fs/file_table.c:281
task_work_run+0xdd/0x190 kernel/task_work.c:141
tracehook_notify_resume include/linux/tracehook.h:188 [inline]
exit_to_user_mode_loop kernel/entry/common.c:165 [inline]
exit_to_user_mode_prepare+0x1e2/0x1f0 kernel/entry/common.c:192
syscall_exit_to_user_mode+0x7a/0x2c0 kernel/entry/common.c:267
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x401210
which is due to a failure in removing the double poll wait entry if we
hit a wakeup match. This can cause multiple invocations of the wakeup,
which isn't safe.
Cc: stable@vger.kernel.org # v5.8
Reported-by: syzbot+81b3883093f772addf6d@syzkaller.appspotmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull io_uring fixes from Jens Axboe:
"Two fixes for regressions in this cycle, and one that goes to 5.8
stable:
- fix leak of getname() retrieved filename
- remove plug->nowait assignment, fixing a regression with btrfs
- fix for async buffered retry"
* tag 'io_uring-5.9-2020-09-25' of git://git.kernel.dk/linux-block:
io_uring: ensure async buffered read-retry is setup properly
io_uring: don't unconditionally set plug->nowait = true
io_uring: ensure open/openat2 name is cleaned on cancelation
|
|
A previous commit for fixing up short reads botched the async retry
path, so we ended up going to worker threads more often than we should.
Fix this up, so retries work the way they originally were intended to.
Fixes: 227c0c9673d8 ("io_uring: internally retry short reads")
Reported-by: Hao_Xu <haoxu@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This causes all the bios to be submitted with REQ_NOWAIT, which can be
problematic on either btrfs or on file systems that otherwise use a mix
of block devices where only some of them support it.
For now, just remove the setting of plug->nowait = true.
Reported-by: Dan Melnic <dmm@fb.com>
Reported-by: Brian Foster <bfoster@redhat.com>
Fixes: b63534c41e20 ("io_uring: re-issue block requests that failed because of resources")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We need to move the closing of the src_device out of all the device
replace locking, but we definitely want to zero out the superblock
before we commit the last time to make sure the device is properly
removed. Handle this by pushing btrfs_scratch_superblocks into
btrfs_dev_replace_finishing, and then later on we'll move the src_device
closing and freeing stuff where we need it to be.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
If we cancel these requests, we'll leak the memory associated with the
filename. Add them to the table of ops that need cleaning, if
REQ_F_NEED_CLEANUP is set.
Cc: stable@vger.kernel.org
Fixes: e62753e4e292 ("io_uring: call statx directly")
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
or get freed, for that matter, if it's a long (separately stored)
name.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"syzkaller started to hit us with reports, here's a fix for one type
(stack overflow when printing checksums on read error).
The other patch is a fix for sysfs object, we have a test for that and
it leads to a crash."
* tag 'for-5.9-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix put of uninitialized kobject after seed device delete
btrfs: fix overflow when copying corrupt csums for a message
|
|
Pull vfs fixes from Al Viro:
"No common topic, just assorted fixes"
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fuse: fix the ->direct_IO() treatment of iov_iter
fs: fix cast in fsparam_u32hex() macro
vboxsf: Fix the check for the old binary mount-arguments struct
|
|
Pull io_uring fixes from Jens Axboe:
"A few fixes - most of them regression fixes from this cycle, but also
a few stable heading fixes, and a build fix for the included demo tool
since some systems now actually have gettid() available"
* tag 'io_uring-5.9-2020-09-22' of git://git.kernel.dk/linux-block:
io_uring: fix openat/openat2 unified prep handling
io_uring: mark statx/files_update/epoll_ctl as non-SQPOLL
tools/io_uring: fix compile breakage
io_uring: don't use retry based buffered reads for non-async bdev
io_uring: don't re-setup vecs/iter in io_resumit_prep() is already there
io_uring: don't run task work on an exiting task
io_uring: drop 'ctx' ref on task work cancelation
io_uring: grab any needed state during defer prep
|
|
The following test case leads to NULL kobject free error:
mount seed /mnt
add sprout to /mnt
umount /mnt
mount sprout to /mnt
delete seed
kobject: '(null)' (00000000dd2b87e4): is not initialized, yet kobject_put() is being called.
WARNING: CPU: 1 PID: 15784 at lib/kobject.c:736 kobject_put+0x80/0x350
RIP: 0010:kobject_put+0x80/0x350
::
Call Trace:
btrfs_sysfs_remove_devices_dir+0x6e/0x160 [btrfs]
btrfs_rm_device.cold+0xa8/0x298 [btrfs]
btrfs_ioctl+0x206c/0x22a0 [btrfs]
ksys_ioctl+0xe2/0x140
__x64_sys_ioctl+0x1e/0x29
do_syscall_64+0x96/0x150
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f4047c6288b
::
This is because, at the end of the seed device-delete, we try to remove
the seed's devid sysfs entry. But for the seed devices under the sprout
fs, we don't initialize the devid kobject yet. So add a kobject state
check, which takes care of the bug.
Fixes: 668e48af7a94 ("btrfs: sysfs, add devid/dev_state kobject and device attributes")
CC: stable@vger.kernel.org # 5.6+
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
A previous commit unified how we handle prep for these two functions,
but this means that we check the allowed context (SQPOLL, specifically)
later than we should. Move the ring type checking into the two parent
functions, instead of doing it after we've done some setup work.
Fixes: ec65fea5a8d7 ("io_uring: deduplicate io_openat{,2}_prep()")
Reported-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
These will naturally fail when attempted through SQPOLL, but either
with -EFAULT or -EBADF. Make it explicit that these are not workable
through SQPOLL and return -EINVAL, just like other ops that need to
use ->files.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Some block devices, like dm, bubble back -EAGAIN through the completion
handler. We check for this in io_read(), but don't honor it for when
we have copied the iov. Return -EAGAIN for this case before retrying,
to force punt to io-wq.
Fixes: bcf5a06304d6 ("io_uring: support true async buffered reads, if file provides it")
Reported-by: Zorro Lang <zlang@redhat.com>
Tested-by: Zorro Lang <zlang@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If we already have mapped the necessary data for retry, then don't set
it up again. It's a pointless operation, and we leak the iovec if it's
a large (non-stack) vec.
Fixes: b63534c41e20 ("io_uring: re-issue block requests that failed because of resources")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Syzkaller reported a buffer overflow in btree_readpage_end_io_hook()
when loop mounting a crafted image:
detected buffer overflow in memcpy
------------[ cut here ]------------
kernel BUG at lib/string.c:1129!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN
CPU: 1 PID: 26 Comm: kworker/u4:2 Not tainted 5.9.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: btrfs-endio-meta btrfs_work_helper
RIP: 0010:fortify_panic+0xf/0x20 lib/string.c:1129
RSP: 0018:ffffc90000e27980 EFLAGS: 00010286
RAX: 0000000000000022 RBX: ffff8880a80dca64 RCX: 0000000000000000
RDX: ffff8880a90860c0 RSI: ffffffff815dba07 RDI: fffff520001c4f22
RBP: ffff8880a80dca00 R08: 0000000000000022 R09: ffff8880ae7318e7
R10: 0000000000000000 R11: 0000000000077578 R12: 00000000ffffff6e
R13: 0000000000000008 R14: ffffc90000e27a40 R15: 1ffff920001c4f3c
FS: 0000000000000000(0000) GS:ffff8880ae700000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000557335f440d0 CR3: 000000009647d000 CR4: 00000000001506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
memcpy include/linux/string.h:405 [inline]
btree_readpage_end_io_hook.cold+0x206/0x221 fs/btrfs/disk-io.c:642
end_bio_extent_readpage+0x4de/0x10c0 fs/btrfs/extent_io.c:2854
bio_endio+0x3cf/0x7f0 block/bio.c:1449
end_workqueue_fn+0x114/0x170 fs/btrfs/disk-io.c:1695
btrfs_work_helper+0x221/0xe20 fs/btrfs/async-thread.c:318
process_one_work+0x94c/0x1670 kernel/workqueue.c:2269
worker_thread+0x64c/0x1120 kernel/workqueue.c:2415
kthread+0x3b5/0x4a0 kernel/kthread.c:292
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:294
Modules linked in:
---[ end trace b68924293169feef ]---
RIP: 0010:fortify_panic+0xf/0x20 lib/string.c:1129
RSP: 0018:ffffc90000e27980 EFLAGS: 00010286
RAX: 0000000000000022 RBX: ffff8880a80dca64 RCX: 0000000000000000
RDX: ffff8880a90860c0 RSI: ffffffff815dba07 RDI: fffff520001c4f22
RBP: ffff8880a80dca00 R08: 0000000000000022 R09: ffff8880ae7318e7
R10: 0000000000000000 R11: 0000000000077578 R12: 00000000ffffff6e
R13: 0000000000000008 R14: ffffc90000e27a40 R15: 1ffff920001c4f3c
FS: 0000000000000000(0000) GS:ffff8880ae700000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f95b7c4d008 CR3: 000000009647d000 CR4: 00000000001506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
The overflow happens, because in btree_readpage_end_io_hook() we assume
that we have found a 4 byte checksum instead of the real possible 32
bytes we have for the checksums.
With the fix applied:
[ 35.726623] BTRFS: device fsid 815caf9a-dc43-4d2a-ac54-764b8333d765 devid 1 transid 5 /dev/loop0 scanned by syz-repro (215)
[ 35.738994] BTRFS info (device loop0): disk space caching is enabled
[ 35.738998] BTRFS info (device loop0): has skinny extents
[ 35.743337] BTRFS warning (device loop0): loop0 checksum verify failed on 1052672 wanted 0xf9c035fc8d239a54 found 0x67a25c14b7eabcf9 level 0
[ 35.743420] BTRFS error (device loop0): failed to read chunk root
[ 35.745899] BTRFS error (device loop0): open_ctree failed
Reported-by: syzbot+e864a35d361e1d4e29a5@syzkaller.appspotmail.com
Fixes: d5178578bcd4 ("btrfs: directly call into crypto framework for checksumming")
CC: stable@vger.kernel.org # 5.4+
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
prototype
Commit 32927393dc1c ("sysctl: pass kernel pointers to ->proc_handler")
changed ctl_table.proc_handler to take a kernel pointer. Adjust the
definition of dirtytime_interval_handler to match its prototype in
linux/writeback.h which fixes the following sparse error/warning:
fs/fs-writeback.c:2189:50: warning: incorrect type in argument 3 (different address spaces)
fs/fs-writeback.c:2189:50: expected void *
fs/fs-writeback.c:2189:50: got void [noderef] __user *buffer
fs/fs-writeback.c:2184:5: error: symbol 'dirtytime_interval_handler' redeclared with different type (incompatible argument 3 (different address spaces)):
fs/fs-writeback.c:2184:5: int extern [addressable] [signed] [toplevel] dirtytime_interval_handler( ... )
fs/fs-writeback.c: note: in included file:
./include/linux/writeback.h:374:5: note: previously declared as:
./include/linux/writeback.h:374:5: int extern [addressable] [signed] [toplevel] dirtytime_interval_handler( ... )
Fixes: 32927393dc1c ("sysctl: pass kernel pointers to ->proc_handler")
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lkml.kernel.org/r/20200907093140.13434-1-tklauser@distanz.ch
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
A mirror index is always of type u32.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
While it is true that reading from an unmirrored source always uses
index 0, that is no longer true for mirrored sources when we fail over.
Fixes: 563c53e73b8b ("NFS: Fix flexfiles read failover")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
the callers rely upon having any iov_iter_truncate() done inside
->direct_IO() countered by iov_iter_reexpand().
Reported-by: Qian Cai <cai@redhat.com>
Tested-by: Qian Cai <cai@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
After client is done with the COPY operation, it needs to invalidate
its pagecache (as it did no reading or writing of the data locally)
and it needs to invalidate it's attributes just like it would have
for a read on the source file and write on the destination file.
Once the linux server started giving out read delegations to
read+write opens, the destination file of the copy_file range
started having delegations and not doing syncup on close of the
file leading to xfstest failures for generic/430,431,432,433,565.
v2: changing cache_validity needs to be protected by the i_lock.
Reported-by: Murphy Zhou <jencce.kernel@gmail.com>
Fixes: 2e72448b07dc ("NFS: Add COPY nfs operation")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
nfs_readdir_page_filler() iterates over entries in a directory, reusing
the same security label buffer, but does not reset the buffer's length.
This causes decode_attr_security_label() to return -ERANGE if an entry's
security label is longer than the previous one's. This error, in
nfs4_decode_dirent(), only gets passed up as -EAGAIN, which causes another
failed attempt to copy into the buffer. The second error is ignored and
the remaining entries do not show up in ls, specifically the getdents64()
syscall.
Reproduce by creating multiple files in NFS and giving one of the later
files a longer security label. ls will not see that file nor any that are
added afterwards, though they will exist on the backend.
In nfs_readdir_page_filler(), reset security label buffer length before
every reuse
Signed-off-by: Jeffrey Mitchell <jeffrey.mitchell@starlab.io>
Fixes: b4487b935452 ("nfs: Fix getxattr kernel panic and memory overflow")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fix from David Sterba:
"One of the recent lockdep fixes introduced a bug that breaks the
search ioctl, which is used by some applications (bees, compsize). The
patch made it to stable trees so we need this fixup to make it work
again"
* tag 'for-5.9-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix wrong address when faulting in pages in the search ioctl
|
|
This isn't safe, and isn't needed either. We are guaranteed that any
work we queue is on a live task (and will be run), or it goes to
our backup io-wq threads if the task is exiting.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If task_work ends up being marked for cancelation, we go through a
cancelation helper instead of the queue path. In converting task_work to
always hold a ctx reference, this path was missed. Make sure that
io_req_task_cancel() puts the reference that is being held against the
ctx.
Fixes: 6d816e088c35 ("io_uring: hold 'ctx' reference around task_work queue + execute")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When faulting in the pages for the user supplied buffer for the search
ioctl, we are passing only the base address of the buffer to the function
fault_in_pages_writeable(). This means that after the first iteration of
the while loop that searches for leaves, when we have a non-zero offset,
stored in 'sk_offset', we try to fault in a wrong page range.
So fix this by adding the offset in 'sk_offset' to the base address of the
user supplied buffer when calling fault_in_pages_writeable().
Several users have reported that the applications compsize and bees have
started to operate incorrectly since commit a48b73eca4ceb9 ("btrfs: fix
potential deadlock in the search ioctl") was added to stable trees, and
these applications make heavy use of the search ioctls. This fixes their
issues.
Link: https://lore.kernel.org/linux-btrfs/632b888d-a3c3-b085-cdf5-f9bb61017d92@lechevalier.se/
Link: https://github.com/kilobyte/compsize/issues/34
Fixes: a48b73eca4ceb9 ("btrfs: fix potential deadlock in the search ioctl")
CC: stable@vger.kernel.org # 4.4+
Tested-by: A L <mail@lechevalier.se>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Always grab work environment for deferred links. The assumption that we
will be running it always from the task in question is false, as exiting
tasks may mean that we're deferring this one to a thread helper. And at
that point it's too late to grab the work environment.
Fixes: debb85f496c9 ("io_uring: factor out grab_env() from defer_prep()")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are some small driver core and debugfs fixes for 5.9-rc5
Included in here are:
- firmware loader memory leak fix
- firmware loader testing fixes for non-EFI systems
- device link locking fixes found by lockdep
- kobject_del() bugfix that has been affecting some callers
- debugfs minor fix
All of these have been in linux-next for a while with no reported
issues"
* tag 'driver-core-5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
test_firmware: Test platform fw loading on non-EFI systems
PM: <linux/device.h>: fix @em_pd kernel-doc warning
kobject: Drop unneeded conditional in __kobject_del()
driver core: Fix device_pm_lock() locking for device links
MAINTAINERS: Add the security document to SECURITY CONTACT
driver code: print symbolic error code
debugfs: Fix module state check condition
kobject: Restore old behaviour of kobject_del(NULL)
firmware_loader: fix memory leak for paged buffer
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A few more fixes:
- regression fix for a crash after failed snapshot creation
- one more lockep fix: use nofs allocation when allocating missing
device
- fix reloc tree leak on degraded mount
- make some extent buffer alignment checks less strict to mount
filesystems created by btrfs-convert"
* tag 'for-5.9-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix NULL pointer dereference after failure to create snapshot
btrfs: free data reloc tree on failed mount
btrfs: require only sector size alignment for parent eb bytenr
btrfs: fix lockdep splat in add_missing_dev
|
|
Pull cifs fix from Steve French:
"A fix for lookup on DFS link when cifsacl or modefromsid is used"
* tag '5.9-rc4-smb3-fix' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix DFS mount with cifsacl/modefromsid
|
|
Checking for the lack of epitems refering to the epoll we want to insert into
is not enough; we might have an insertion of that epoll into another one that
has already collected the set of files to recheck for excessive reverse paths,
but hasn't gotten to creating/inserting the epitem for it.
However, any such insertion in progress can be detected - it will update the
generation count in our epoll when it's done looking through it for files
to check. That gets done under ->mtx of our epoll and that allows us to
detect that safely.
We are *not* holding epmutex here, so the generation count is not stable.
However, since both the update of ep->gen by loop check and (later)
insertion into ->f_ep_link are done with ep->mtx held, we are fine -
the sequence is
grab epmutex
bump loop_check_gen
...
grab tep->mtx // 1
tep->gen = loop_check_gen
...
drop tep->mtx // 2
...
grab tep->mtx // 3
...
insert into ->f_ep_link
...
drop tep->mtx // 4
bump loop_check_gen
drop epmutex
and if the fastpath check in another thread happens for that
eventpoll, it can come
* before (1) - in that case fastpath is just fine
* after (4) - we'll see non-empty ->f_ep_link, slow path
taken
* between (2) and (3) - loop_check_gen is stable,
with ->mtx providing barriers and we end up taking slow path.
Note that ->f_ep_link emptiness check is slightly racy - we are protected
against insertions into that list, but removals can happen right under us.
Not a problem - in the worst case we'll end up taking a slow path for
no good reason.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs fixes from Jaegeuk Kim:
"Small bug fixes for:
- SMR drive fix
- infinite loop when building free node ids
- EOF at DIO read"
* tag 'f2fs-for-5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs:
f2fs: Return EOF on unaligned end of file DIO read
f2fs: fix indefinite loop scanning for free nid
f2fs: Fix type of section block count variables
|
|
removes the need to clear it, along with the races.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Pull NFS client bugfixes from Trond Myklebust:
- Fix an NFS/RDMA resource leak
- Fix the error handling during delegation recall
- NFSv4.0 needs to return the delegation on a zero-stateid SETATTR
- Stop printk reading past end of string
* tag 'nfs-for-5.9-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
SUNRPC: stop printk reading past end of string
NFS: Zero-stateid SETATTR should first return delegation
NFSv4.1 handle ERR_DELAY error reclaiming locking state on delegation recall
xprtrdma: Release in-flight MRs on disconnect
|
|
Reading past end of file returns EOF for aligned reads but -EINVAL for
unaligned reads on f2fs. While documentation is not strict about this
corner case, most filesystem returns EOF on this case, like iomap
filesystems. This patch consolidates the behavior for f2fs, by making
it return EOF(0).
it can be verified by a read loop on a file that does a partial read
before EOF (A file that doesn't end at an aligned address). The
following code fails on an unaligned file on f2fs, but not on
btrfs, ext4, and xfs.
while (done < total) {
ssize_t delta = pread(fd, buf + done, total - done, off + done);
if (!delta)
break;
...
}
It is arguable whether filesystems should actually return EOF or
-EINVAL, but since iomap filesystems support it, and so does the
original DIO code, it seems reasonable to consolidate on that.
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
If the sbi->ckpt->next_free_nid is not NAT block aligned and if there
are free nids in that NAT block between the start of the block and
next_free_nid, then those free nids will not be scanned in scan_nat_page().
This results into mismatch between nm_i->available_nids and the sum of
nm_i->free_nid_count of all NAT blocks scanned. And nm_i->available_nids
will always be greater than the sum of free nids in all the blocks.
Under this condition, if we use all the currently scanned free nids,
then it will loop forever in f2fs_alloc_nid() as nm_i->available_nids
is still not zero but nm_i->free_nid_count of that partially scanned
NAT block is zero.
Fix this to align the nm_i->next_scan_nid to the first nid of the
corresponding NAT block.
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Commit da52f8ade40b ("f2fs: get the right gc victim section when section
has several segments") added code to count blocks of each section using
variables with type 'unsigned short', which has 2 bytes size in many
systems. However, the counts can be larger than the 2 bytes range and
type conversion results in wrong values. Especially when the f2fs
sections have blocks as many as USHRT_MAX + 1, the count is handled as 0.
This triggers eternal loop in init_dirty_segmap() at mount system call.
Fix this by changing the type of the variables to block_t.
Fixes: da52f8ade40b ("f2fs: get the right gc victim section when section has several segments")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
When trying to get a new fs root for a snapshot during the transaction
at transaction.c:create_pending_snapshot(), if btrfs_get_new_fs_root()
fails we leave "pending->snap" pointing to an error pointer, and then
later at ioctl.c:create_snapshot() we dereference that pointer, resulting
in a crash:
[12264.614689] BUG: kernel NULL pointer dereference, address: 00000000000007c4
[12264.615650] #PF: supervisor write access in kernel mode
[12264.616487] #PF: error_code(0x0002) - not-present page
[12264.617436] PGD 0 P4D 0
[12264.618328] Oops: 0002 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI
[12264.619150] CPU: 0 PID: 2310635 Comm: fsstress Tainted: G W 5.9.0-rc3-btrfs-next-67 #1
[12264.619960] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[12264.621769] RIP: 0010:btrfs_mksubvol+0x438/0x4a0 [btrfs]
[12264.622528] Code: bc ef ff ff (...)
[12264.624092] RSP: 0018:ffffaa6fc7277cd8 EFLAGS: 00010282
[12264.624669] RAX: 00000000fffffff4 RBX: ffff9d3e8f151a60 RCX: 0000000000000000
[12264.625249] RDX: 0000000000000001 RSI: ffffffff9d56c9be RDI: fffffffffffffff4
[12264.625830] RBP: ffff9d3e8f151b48 R08: 0000000000000000 R09: 0000000000000000
[12264.626413] R10: 0000000000000000 R11: 0000000000000000 R12: 00000000fffffff4
[12264.626994] R13: ffff9d3ede380538 R14: ffff9d3ede380500 R15: ffff9d3f61b2eeb8
[12264.627582] FS: 00007f140d5d8200(0000) GS:ffff9d3fb5e00000(0000) knlGS:0000000000000000
[12264.628176] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[12264.628773] CR2: 00000000000007c4 CR3: 000000020f8e8004 CR4: 00000000003706f0
[12264.629379] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[12264.629994] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[12264.630594] Call Trace:
[12264.631227] btrfs_mksnapshot+0x7b/0xb0 [btrfs]
[12264.631840] __btrfs_ioctl_snap_create+0x16f/0x1a0 [btrfs]
[12264.632458] btrfs_ioctl_snap_create_v2+0xb0/0xf0 [btrfs]
[12264.633078] btrfs_ioctl+0x1864/0x3130 [btrfs]
[12264.633689] ? do_sys_openat2+0x1a7/0x2d0
[12264.634295] ? kmem_cache_free+0x147/0x3a0
[12264.634899] ? __x64_sys_ioctl+0x83/0xb0
[12264.635488] __x64_sys_ioctl+0x83/0xb0
[12264.636058] do_syscall_64+0x33/0x80
[12264.636616] entry_SYSCALL_64_after_hwframe+0x44/0xa9
(gdb) list *(btrfs_mksubvol+0x438)
0x7c7b8 is in btrfs_mksubvol (fs/btrfs/ioctl.c:858).
853 ret = 0;
854 pending_snapshot->anon_dev = 0;
855 fail:
856 /* Prevent double freeing of anon_dev */
857 if (ret && pending_snapshot->snap)
858 pending_snapshot->snap->anon_dev = 0;
859 btrfs_put_root(pending_snapshot->snap);
860 btrfs_subvolume_release_metadata(root, &pending_snapshot->block_rsv);
861 free_pending:
862 if (pending_snapshot->anon_dev)
So fix this by setting "pending->snap" to NULL if we get an error from the
call to btrfs_get_new_fs_root() at transaction.c:create_pending_snapshot().
Fixes: 2dfb1e43f57dd3 ("btrfs: preallocate anon block device at first phase of snapshot creation")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
While testing a weird problem with -o degraded, I noticed I was getting
leaked root errors
BTRFS warning (device loop0): writable mount is not allowed due to too many missing devices
BTRFS error (device loop0): open_ctree failed
BTRFS error (device loop0): leaked root -9-0 refcount 1
This is the DATA_RELOC root, which gets read before the other fs roots,
but is included in the fs roots radix tree. Handle this by adding a
btrfs_drop_and_free_fs_root() on the data reloc root if it exists. This
is ok to do here if we fail further up because we will only drop the ref
if we delete the root from the radix tree, and all other cleanup won't
be duplicated.
CC: stable@vger.kernel.org # 5.8+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
