Age | Commit message (Collapse) | Author | Files | Lines |
|
I'm about to replace nfsd_file_hashtbl with an rhashtable. The
individual hash values will no longer be visible or relevant, so
remove them from the tracepoints.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The checks in nfsd_file_acquire() and nfsd_file_put() that directly
invoke filecache garbage collection are intended to keep cache
occupancy between a low- and high-watermark. The reason to limit the
capacity of the filecache is to keep filecache lookups reasonably
fast.
However, invoking garbage collection at those points has some
undesirable negative impacts. Files that are held open by NFSv4
clients often push the occupancy of the filecache over these
watermarks. At that point:
- Every call to nfsd_file_acquire() and nfsd_file_put() results in
an LRU walk. This has the same effect on lookup latency as long
chains in the hash table.
- Garbage collection will then run on every nfsd thread, causing a
lot of unnecessary lock contention.
- Limiting cache capacity pushes out files used only by NFSv3
clients, which are the type of files the filecache is supposed to
help.
To address those negative impacts, remove the direct calls to the
garbage collector. Subsequent patches will address maintaining
lookup efficiency as cache capacity increases.
Suggested-by: Wang Yugui <wangyugui@e16-tech.com>
Suggested-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Without LRU item rotation, the shrinker visits only a few items on
the end of the LRU list, and those would always be long-term OPEN
files for NFSv4 workloads. That makes the filecache shrinker
completely ineffective.
Adopt the same strategy as the inode LRU by using LRU_ROTATE.
Suggested-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
There have been reports of problems when running fstests generic/531
against Linux NFS servers with NFSv4. The NFS server that hosts the
test's SCRATCH_DEV suffers from CPU soft lock-ups during the test.
Analysis shows that:
fs/nfsd/filecache.c
482 ret = list_lru_walk(&nfsd_file_lru,
483 nfsd_file_lru_cb,
484 &head, LONG_MAX);
causes nfsd_file_gc() to walk the entire length of the filecache LRU
list every time it is called (which is quite frequently). The walk
holds a spinlock the entire time that prevents other nfsd threads
from accessing the filecache.
What's more, for NFSv4 workloads, none of the items that are visited
during this walk may be evicted, since they are all files that are
held OPEN by NFS clients.
Address this by ensuring that open files are not kept on the LRU
list.
Reported-by: Frank van der Linden <fllinden@amazon.com>
Reported-by: Wang Yugui <wangyugui@e16-tech.com>
Link: https://bugzilla.linux-nfs.org/show_bug.cgi?id=386
Suggested-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Observe the operation of garbage collection and the lifetime of
filecache items.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Add a guardrail to prevent freeing memory that is still on a list.
This includes either a dispose list or the LRU list.
This is the sign of a bug, but this class of bugs can be detected
so that they don't endanger system stability, especially while
debugging.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
There has always been the capability of exporting filecache metrics
via /proc, but it was never hooked up. Let's surface these metrics
to enable better observability of the filecache.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
If nfsd_file_cache_init() is called after a shutdown, be sure the
stat counters are reset.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Refactor nfsd_file_gc() to use the new list_lru helper.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Refactor the invariant part of nfsd_file_lru_walk_list() into a
separate helper function.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
This is a measure of how long items stay in the filecache, to help
assess how efficient the cache is.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Surface the count of freed nfsd_file items.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Count the number of successful acquisitions that did not create a
file (ie, acquisitions that do not result in a compulsory cache
miss). This count can be compared directly with the reported hit
count to compute a hit ratio.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Surface the NFSD filecache's LRU list length to help field
troubleshooters monitor filecache issues.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The call trace doesn't add much value, but it sure is noisy.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Variable len is being assigned a value zero and this is never
read, it is being re-assigned later. The assignment is redundant
and can be removed.
Cleans up clang scan-build warning:
fs/nfsd/nfsctl.c:636:2: warning: Value stored to 'len' is never read
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Add a blank space after ','.
Change 'succesful' to 'successful'.
Signed-off-by: Zhang Jiaming <jiaming@nfschina.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Capture file handles and how they map to local inodes. In particular,
NFSv4 PUTFH uses fh_verify() so we can now observe which file handles
are the target of OPEN, LOOKUP, RENAME, and so on.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Instead of trusting that struct file_lock returns completely unchanged
after vfs_test_lock() when there's no conflicting lock, stash away our
nlm_lockowner reference so we can properly release it for all cases.
This defends against another file_lock implementation overwriting fl_owner
when the return type is F_UNLCK.
Reported-by: Roberto Bergantinos Corpas <rbergant@redhat.com>
Tested-by: Roberto Bergantinos Corpas <rbergant@redhat.com>
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
We had a report from the spring Bake-a-thon of data corruption in some
nfstest_interop tests. Looking at the traces showed the NFS server
allowing a v3 WRITE to proceed while a read delegation was still
outstanding.
Currently, we only set NFSD_FILE_BREAK_* flags if
NFSD_MAY_NOT_BREAK_LEASE was set when we call nfsd_file_alloc.
NFSD_MAY_NOT_BREAK_LEASE was intended to be set when finding files for
COMMIT ops, where we need a writeable filehandle but don't need to
break read leases.
It doesn't make any sense to consult that flag when allocating a file
since the file may be used on subsequent calls where we do want to break
the lease (and the usage of it here seems to be reverse from what it
should be anyway).
Also, after calling nfsd_open_break_lease, we don't want to clear the
BREAK_* bits. A lease could end up being set on it later (more than
once) and we need to be able to break those leases as well.
This means that the NFSD_FILE_BREAK_* flags now just mirror
NFSD_MAY_{READ,WRITE} flags, so there's no need for them at all. Just
drop those flags and unconditionally call nfsd_open_break_lease every
time.
Reported-by: Olga Kornieskaia <kolga@netapp.com>
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2107360
Fixes: 65294c1f2c5e (nfsd: add a new struct file caching facility to nfsd)
Cc: <stable@vger.kernel.org> # 5.4.x : bb283ca18d1e NFSD: Clean up the show_nf_flags() macro
Cc: <stable@vger.kernel.org> # 5.4.x
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Some code paths cannot guarantee the inode have any dentry alias. So
WARN_ON() all !dentry may flood the kernel logs.
For example, when an overlayfs inode is watched by inotifywait (1), and
someone is trying to read the /proc/$(pidof inotifywait)/fdinfo/INOTIFY_FD,
at that time if the dentry has been reclaimed by kernel (such as
echo 2 > /proc/sys/vm/drop_caches), there will be a WARN_ON(). The
printed call stack would be like:
? show_mark_fhandle+0xf0/0xf0
show_mark_fhandle+0x4a/0xf0
? show_mark_fhandle+0xf0/0xf0
? seq_vprintf+0x30/0x50
? seq_printf+0x53/0x70
? show_mark_fhandle+0xf0/0xf0
inotify_fdinfo+0x70/0x90
show_fdinfo.isra.4+0x53/0x70
seq_show+0x130/0x170
seq_read+0x153/0x440
vfs_read+0x94/0x150
ksys_read+0x5f/0xe0
do_syscall_64+0x59/0x1e0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
So let's drop WARN_ON() to avoid kernel log flooding.
Reported-by: Hongbo Yin <yinhongbo@bytedance.com>
Signed-off-by: Jiachen Zhang <zhangjiachen.jaycee@bytedance.com>
Signed-off-by: Tianci Zhang <zhangtianci.1997@bytedance.com>
Fixes: 8ed5eec9d6c4 ("ovl: encode pure upper file handles")
Cc: <stable@vger.kernel.org> # v4.16
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Provide a proper stub for the !CONFIG_FS_POSIX_ACL case.
Signed-off-by: Yang Xu <xuyang2018.jy@fujitsu.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Replace 'the the' with 'the' in the comment.
Signed-off-by: Slark Xiao <slark_xiao@163.com>
Link: https://lore.kernel.org/r/20220722100518.79741-1-slark_xiao@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The use of kmap_atomic() is being deprecated in favor of kmap_local_page().
With kmap_local_page(), the mappings are per thread, CPU local and not
globally visible. Furthermore, the mappings can be acquired from any
context (including interrupts).
Therefore, replace kmap_atomic() with kmap_local_page() in
copy_string_kernel(). Instead of open-coding local mapping + memcpy(),
use memcpy_to_page(). Delete a redundant call to flush_dcache_page().
Tested with xfstests on a QEMU/ KVM x86_32 VM, 6GB RAM, booting a kernel
with HIGHMEM64GB enabled.
Suggested-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220724212523.13317-1-fmdefrancesco@gmail.com
|
|
With the automatic block group reclaim code we will preemptively try to
mark the block group RO before we start the relocation. We do this to
make sure we should actually try to relocate the block group.
However if we hit an error during the actual relocation we won't clean
up our RO counter and the block group will remain RO. This was observed
internally with file systems reporting less space available from df when
we had failed background relocations.
Fix this by doing the dec_ro in the error case.
Fixes: 18bb8bbf13c1 ("btrfs: zoned: automatically reclaim zones")
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Remove warnings found by running scripts/kernel-doc,
which is caused by using 'make W=1'.
fs/overlayfs/super.c:311: warning: Function parameter or member 'dentry'
not described in 'ovl_statfs'
fs/overlayfs/super.c:311: warning: Excess function parameter 'sb'
description in 'ovl_statfs'
fs/overlayfs/super.c:357: warning: Function parameter or member 'm' not
described in 'ovl_show_options'
fs/overlayfs/super.c:357: warning: Function parameter or member 'dentry'
not described in 'ovl_show_options'
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
When mounting overlayfs in an unprivileged user namespace, trusted xattr
creation will fail. This will lead to failures in some file operations,
e.g. in the following situation:
mkdir lower upper work merged
mkdir lower/directory
mount -toverlay -olowerdir=lower,upperdir=upper,workdir=work none merged
rmdir merged/directory
mkdir merged/directory
The last mkdir will fail:
mkdir: cannot create directory 'merged/directory': Input/output error
The cause for these failures is currently extremely non-obvious and hard to
debug. Hence, warn the user and suggest using the userxattr mount option,
if it is not already supplied and xattr creation fails during the
self-check.
Reported-by: Alois Wohlschlager <alois1@gmx-topmail.de>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
A client should be able to handle getting an EACCES error while doing
a mount operation to reclaim state due to NFS4CLNT_RECLAIM_REBOOT
being set. If the server returns RPC_AUTH_BADCRED because authentication
failed when we execute "exportfs -au", then RECLAIM_COMPLETE will go a
wrong way. After mount succeeds, all OPEN call will fail due to an
NFS4ERR_GRACE error being returned. This patch is to fix it by resending
a RPC request.
Signed-off-by: Zhang Xianwei <zhang.xianwei8@zte.com.cn>
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Fixes: aa5190d0ed7d ("NFSv4: Kill nfs4_async_handle_error() abuses by NFSv4.1")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Force unmount of FUSE severes the connection with the user space, even if
there are still open files. Subsequent remount tries to re-use the
superblock held by the open files, which is meaningless in the FUSE case
after disconnect - reused super block doesn't have userspace counterpart
attached to it and is incapable of doing any IO.
This patch adds the functionality only for the block-device-based supers,
since the primary use case of the feature is to gracefully handle force
unmount of external devices, mounted with FUSE. This can be further
extended to cover all superblocks, if the need arises.
Signed-off-by: Daniil Lunev <dlunev@chromium.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
The function is to be called from filesystem-specific code to mark a
superblock to be ignored by superblock test and thus never re-used. The
function also unregisters bdi if the bdi is per-superblock to avoid
collision if a new superblock is created to represent the filesystem.
generic_shutdown_super() skips unregistering bdi for a retired superlock as
it assumes retire function has already done it.
This patch adds the functionality only for the block-device-based supers,
since the primary use case of the feature is to gracefully handle force
unmount of external devices, mounted with FUSE. This can be further
extended to cover all superblocks, if the need arises.
Signed-off-by: Daniil Lunev <dlunev@chromium.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
There is a report that kernel oops happen from idr_remove().
kernel: BUG: kernel NULL pointer dereference, address: 0000000000000010
kernel: RIP: 0010:idr_remove+0x1/0x20
kernel: __ksmbd_close_fd+0xb2/0x2d0 [ksmbd]
kernel: ksmbd_vfs_read+0x91/0x190 [ksmbd]
kernel: ksmbd_fd_put+0x29/0x40 [ksmbd]
kernel: smb2_read+0x210/0x390 [ksmbd]
kernel: __process_request+0xa4/0x180 [ksmbd]
kernel: __handle_ksmbd_work+0xf0/0x290 [ksmbd]
kernel: handle_ksmbd_work+0x2d/0x50 [ksmbd]
kernel: process_one_work+0x21d/0x3f0
kernel: worker_thread+0x50/0x3d0
kernel: rescuer_thread+0x390/0x390
kernel: kthread+0xee/0x120
kthread_complete_and_exit+0x20/0x20
kernel: ret_from_fork+0x22/0x30
While accessing files, If connection is disconnected, windows send
session setup request included previous session destroy. But while still
processing requests on previous session, this request destroy file
table, which mean file table idr will be freed and set to NULL.
So kernel oops happen from ft->idr in __ksmbd_close_fd().
This patch don't directly destroy session in destroy_previous_session().
It just set to KSMBD_SESS_EXITING so that connection will be
terminated after finishing the rest of requests.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Add missing rwlock for channel list in session.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Replace sessions list in connection with xarray.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"Thirteen hotfixes.
Eight are cc:stable and the remainder are for post-5.18 issues or are
too minor to warrant backporting"
* tag 'mm-hotfixes-stable-2022-07-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mailmap: update Gao Xiang's email addresses
userfaultfd: provide properly masked address for huge-pages
Revert "ocfs2: mount shared volume without ha stack"
hugetlb: fix memoryleak in hugetlb_mcopy_atomic_pte
fs: sendfile handles O_NONBLOCK of out_fd
ntfs: fix use-after-free in ntfs_ucsncmp()
secretmem: fix unhandled fault in truncate
mm/hugetlb: separate path for hwpoison entry in copy_hugetlb_page_range()
mm: fix missing wake-up event for FSDAX pages
mm: fix page leak with multiple threads mapping the same page
mailmap: update Seth Forshee's email address
tmpfs: fix the issue that the mount and remount results are inconsistent.
mm: kfence: apply kmemleak_ignore_phys on early allocated pool
|
|
Commit 824ddc601adc ("userfaultfd: provide unmasked address on
page-fault") was introduced to fix an old bug, in which the offset in the
address of a page-fault was masked. Concerns were raised - although were
never backed by actual code - that some userspace code might break because
the bug has been around for quite a while. To address these concerns a
new flag was introduced, and only when this flag is set by the user,
userfaultfd provides the exact address of the page-fault.
The commit however had a bug, and if the flag is unset, the offset was
always masked based on a base-page granularity. Yet, for huge-pages, the
behavior prior to the commit was that the address is masked to the
huge-page granulrity.
While there are no reports on real breakage, fix this issue. If the flag
is unset, use the address with the masking that was done before.
Link: https://lkml.kernel.org/r/20220711165906.2682-1-namit@vmware.com
Fixes: 824ddc601adc ("userfaultfd: provide unmasked address on page-fault")
Signed-off-by: Nadav Amit <namit@vmware.com>
Reported-by: James Houghton <jthoughton@google.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: James Houghton <jthoughton@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The double `if' is duplicated in line 104, remove one.
Signed-off-by: Xin Gao <gaoxin@cdjrlc.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220722194639.18545-1-gaoxin@cdjrlc.com
|
|
Add checks verifying number of inodes stored in the superblock matches
the number computed from number of inodes per group. Also verify we have
at least one block worth of inodes per group. This prevents crashes on
corrupted filesystems.
Reported-by: syzbot+d273f7d7f58afd93be48@syzkaller.appspotmail.com
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Since commit 27b3a5c51b50 ("kill-the-bkl/reiserfs: drop the fs race
watchdog from _get_block_create_0()"), which removed a label that may
have the pointer 'p' touched in its control flow, related if statements
now eval to constant value now. Just remove them.
Assigning value NULL to p here
293 char *p = NULL;
In the following conditional expression, the value of p is always NULL,
As a result, the kunmap() cannot be executed.
308 if (p)
309 kunmap(bh_result->b_page);
355 if (p)
356 kunmap(bh_result->b_page);
366 if (p)
367 kunmap(bh_result->b_page);
Also, the kmap() cannot be executed.
399 if (!p)
400 p = (char *)kmap(bh_result->b_page);
[JK: Removed unnecessary initialization of 'p' to NULL]
Signed-off-by: Zeng Jingxiang <linuszeng@tencent.com>
Signed-off-by: Kairui Song <kasong@tencent.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220720083029.1065578-1-zengjx95@gmail.com
|
|
We should isolate operators with spaces.
Signed-off-by: Deming Wang <wangdeming@inspur.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
This flag was used to communicate that the low-level compression code
already did verify the checksum to the high-level I/O completion code.
But it has been unused for a long time as the upper btrfs_bio for the
decompressed data had a NULL csum pointer basically since that pointer
existed and the code already checks for that a little later.
Note that this does not affect the other use of the checked flag, which
is only used for the COW fixup worker.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently the checksum of compressed extents is verified based on the
compressed data and the lower btrfs_bio, but the actual repair process
is driven by end_bio_extent_readpage on the upper btrfs_bio for the
decompressed data.
This has a bunch of issues, including not being able to properly
communicate the failed mirror up in case that the I/O submission got
preempted, a general loss of if an error was an I/O error or a checksum
verification failure, but most importantly that this design causes
btrfs_clean_io_failure to eventually write back the uncompressed good
data onto the disk sectors that are supposed to contain compressed data.
Fix this by moving the repair to the lower btrfs_bio. To do so, a fair
amount of code has to be reshuffled:
a) the lower btrfs_bio now needs a valid csum pointer. The easiest way
to achieve that is to pass NULL btrfs_lookup_bio_sums and just use
the btrfs_bio management of csums. For a compressed_bio that is
split into multiple btrfs_bios this means additional memory
allocations, but the code becomes a lot more regular.
b) checksum verification now runs directly on the lower btrfs_bio instead
of the compressed_bio. This actually nicely simplifies the end I/O
processing.
c) btrfs_repair_one_sector can't just look up the logical address for
the file offset any more, as there is no corresponding relative
offsets that apply to the file offset and the logic address for
compressed extents. Instead require that the saved bvec_iter in the
btrfs_bio is filled out for all read bios and use that, which again
removes a fair amount of code.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Derive the value of start from the btrfs_bio now that ->file_offset is
always valid. Also export and rename the function so it's available
outside of inode.c as we'll need that soon.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Pass the btrfs_bio instead of the plain bio to btrfs_repair_one_sector,
and remove the start and failed_mirror arguments in favor of deriving
them from the btrfs_bio. For this to work ensure that the file_offset
field is also initialized for buffered I/O.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Instead of counting the sectors just count the bios, with an extra
reference held during submission. This significantly simplifies the
submission side error handling.
This slightly changes completion and error handling of
btrfs_submit_compressed_{read,write} because with the old code the
compressed_bio could have been completed in
submit_compressed_{read,write} only if there was an error during
submission for one of the lower bio, whilst with the new code there is a
chance for this to happen even for successful submission if the all the
lower bios complete before the end of the function is reached.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When there is more than a single level of redundancy there can also be
multiple bad mirrors, and the current read repair code only repairs the
last bad one.
Restructure btrfs_repair_one_sector so that it records the originally
failed mirror and the number of copies, and then repair all known bad
copies until we reach the originally failed copy in clean_io_failure.
Note that this also means the read repair reads will always start from
the next bad mirror and not mirror 0.
This fixes btrfs/265 in xfstests.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Fold it into the only caller.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When logging a new name, in case of a rename, we pin the log before
changing it. We then either delete a directory entry from the log or
insert a key range item to mark the old name for deletion on log replay.
However when doing one of those log changes we may have another task that
started writing out the log (at btrfs_sync_log()) and it started before
we pinned the log root. So we may end up changing a log tree while its
writeback is being started by another task syncing the log. This can lead
to inconsistencies in a log tree and other unexpected results during log
replay, because we can get some committed node pointing to a node/leaf
that ends up not getting written to disk before the next log commit.
The problem, conceptually, started to happen in commit 88d2beec7e53fc
("btrfs: avoid logging all directory changes during renames"), because
there we started to update the log without joining its current transaction
first.
However the problem only became visible with commit 259c4b96d78dda
("btrfs: stop doing unnecessary log updates during a rename"), and that is
because we used to pin the log at btrfs_rename() and then before entering
btrfs_log_new_name(), when unlinking the old dentry, we ended up at
btrfs_del_inode_ref_in_log() and btrfs_del_dir_entries_in_log(). Both
of them join the current log transaction, effectively waiting for any log
transaction writeout (due to acquiring the root's log_mutex). This made it
safe even after leaving the current log transaction, because we remained
with the log pinned when we called btrfs_log_new_name().
Then in commit 259c4b96d78dda ("btrfs: stop doing unnecessary log updates
during a rename"), we removed the log pinning from btrfs_rename() and
stopped calling btrfs_del_inode_ref_in_log() and
btrfs_del_dir_entries_in_log() during the rename, and started to do all
the needed work at btrfs_log_new_name(), but without joining the current
log transaction, only pinning the log, which is racy because another task
may have started writeout of the log tree right before we pinned the log.
Both commits landed in kernel 5.18, so it doesn't make any practical
difference which should be blamed, but I'm blaming the second commit only
because with the first one, by chance, the problem did not happen due to
the fact we joined the log transaction after pinning the log and unpinned
it only after calling btrfs_log_new_name().
So make btrfs_log_new_name() join the current log transaction instead of
pinning it, so that we never do log updates if it's writeout is starting.
Fixes: 259c4b96d78dda ("btrfs: stop doing unnecessary log updates during a rename")
CC: stable@vger.kernel.org # 5.18+
Reported-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org>
Tested-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|