| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
nochanges means "we cannot issue writes at all"; it's possible to go
into a pseudo read-write mode where we pin dirty metadata in memory,
which is used for fsck in dry run mode and doing journal replay on a
read only mount, but we do not want to allow an actual read-write mount
in nochanges mode.
But we do always want to allow early read-write, during recovery - this
patch clarifies that.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
In the loop in netfs_rreq_unmark_after_write() that removes the PG_fscache
from folios after they've been written to the cache, as soon as we remove
the mark from a multipage folio, it can get split - and then we might see a
fragment of folio again.
Guard against this by advancing the 'unlocked' tracker to the index of the
last page in the folio to avoid a double removal of the PG_fscache mark.
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Matthew Wilcox <willy@infradead.org>
cc: linux-afs@lists.infradead.org
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fix from Chuck Lever:
- Fix another regression in the NFSD administrative API
* tag 'nfsd-6.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
nfsd: drop the nfsd_put helper
|
|
If try_to_free_buffers() succeeded and then folio_alloc_buffers() failed,
grow_dev_folio() would return success. This would be incorrect; memory
allocation failure is supposed to result in a failure. It's a harmless
bug; the caller will simply go around the loop one more time and
grow_dev_folio() will correctly return a failure that time. But it was an
unintended change and looks like a more serious bug than it is.
While I'm in here, improve the commentary about why we return success even
though we failed.
Link: https://lkml.kernel.org/r/20240101093848.2017115-1-willy@infradead.org
Fixes: 6d840a18773f ("buffer: return bool from grow_dev_folio()")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reported-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Pull smb client fixes from Steve French:
"Three important multichannel smb3 client fixes found in recent
testing:
- fix oops due to incorrect refcounting of interfaces after
disabling multichannel
- fix possible unrecoverable session state after disabling
multichannel with active sessions
- fix two places that were missing use of chan_lock"
* tag '6.7-rc8-smb3-mchan-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: do not depend on release_iface for maintaining iface_list
cifs: cifs_chan_is_iface_active should be called with chan_lock held
cifs: after disabling multichannel, mark tcon for reconnect
|
|
The checking of @c->nroot->flags and @c->dirty_[n|p]n_cnt in function
nothing_to_commit() is not atomic, which could be raced with modifying
of lpt, for example:
P1 P2 P3
run_gc
ubifs_garbage_collect
do_commit
ubifs_return_leb
ubifs_lpt_lookup_dirty
dirty_cow_nnode
do_commit
nothing_to_commit
if (test_bit(DIRTY_CNODE, &c->nroot->flags)
// false
test_and_set_bit(DIRTY_CNODE, &nnode->flags)
c->dirty_nn_cnt += 1
ubifs_assert(c, c->dirty_nn_cnt == 0)
// false !
Fetch a reproducer in Link:
UBIFS error (ubi0:0 pid 2747): ubifs_assert_failed
UBIFS assert failed: c->dirty_pn_cnt == 0, in fs/ubifs/commit.c
Call Trace:
ubifs_ro_mode+0x58/0x70 [ubifs]
ubifs_assert_failed+0x6a/0x90 [ubifs]
do_commit+0x5b7/0x930 [ubifs]
ubifs_run_commit+0xc6/0x1a0 [ubifs]
ubifs_sync_fs+0xd8/0x110 [ubifs]
sync_filesystem+0xb4/0x120
do_syscall_64+0x6f/0x140
Fix it by checking @c->dirty_[n|p]n_cnt and @c->nroot state with
@c->lp_mutex locked.
Fixes: 944fdef52ca9 ("UBIFS: do not start the commit if there is nothing to commit")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218162
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
An issue can occur between write-streaming (storing dirty data in partial
non-uptodate pages) and a cachefiles object being culled to make space.
The problem occurs because the cache object is only marked in use while
there are files open using it. Once it has been released, it can be culled
and the cookie marked disabled.
At this point, a streaming write is permitted to occur (if the cache is
active, we require pages to be prefetched and cached), but the cache can
become active again before this gets flushed out - and then two effects can
occur:
(1) The cache may be asked to write out a region that's less than its DIO
block size (assumed by cachefiles to be PAGE_SIZE) - and this causes
one of two debugging statements to be emitted.
(2) netfs_how_to_modify() gets confused because it sees a page that isn't
allowed to be non-uptodate being uptodate and tries to prefetch it -
leading to a warning that PG_fscache is set twice.
Fix this by the following means:
(1) Add a netfs_inode flag to disallow write-streaming to an inode and set
it if we ever do local caching of that inode. It remains set for the
lifetime of that inode - even if the cookie becomes disabled.
(2) If the no-write-streaming flag is set, then make netfs_how_to_modify()
always want to prefetch instead.
(3) If netfs_how_to_modify() decides it wants to prefetch a folio, but
that folio has write-streamed data in it, then it requires the folio
be flushed first.
(4) Export a counter of the number of times we wanted to prefetch a
non-uptodate page, but found it had write-streamed data in it.
(5) Export a counter of the number of times we cancelled a write to the
cache because it didn't DIO align and remove the debug statements.
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
cc: linux-erofs@lists.ozlabs.org
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
|
|
With 16a26b20d2afd ("ubifs: authentication: Add hashes to index nodes")
insert_node() and insert_dent() got a new function parameter 'hash'. Add
a description for this new parameter.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311051618.D7YUE1Rr-lkp@intel.com/
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
Use the correct function name in the kernel-doc comment to prevent
a kernel-doc warning:
auth.c:30: warning: expecting prototype for ubifs_node_calc_hash(). Prototype was for __ubifs_node_calc_hash() instead
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: lore.kernel.org/r/202311052125.gE1Rylox-lkp@intel.com
Cc: Richard Weinberger <richard@nod.at>
Cc: linux-mtd@lists.infradead.org
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
Simplify ubifs_hmac_wkm() by using crypto_shash_tfm_digest() instead of
an alloc+init+update+final sequence. This should also improve
performance.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Tested-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
Provide a counter for DIO writes to match that for DIO reads.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
|
|
Mark netfs_unbuffered_write_iter_locked() static as it's only called from
the file in which it is defined.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
|
|
Since JBD2 takes care of all metadata writeback errors of fs dev,
ext4_check_bdev_write_error() is useful only in nojournal mode.
Move it into '!ext4_handle_valid(handle)' branch.
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20231213013224.2100050-6-chengzhihao1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
This is a replacement solution of commit bc71726c725767 ("ext4: abort
the filesystem if failed to async write metadata buffer"), JBD2 can
detect metadata writeback error of fs dev by 'j_fs_dev_wb_err'.
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20231213013224.2100050-5-chengzhihao1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Since 'JBD2_CHECKPOINT_IO_ERROR' and j_atomic_flags' are not useful
anymore after fs dev's errseq is imported into jbd2, just remove them.
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20231213013224.2100050-4-chengzhihao1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Now JBD2 detects metadata writeback error of fs dev according to errseq.
Replace journal state flag by checking errseq.
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20231213013224.2100050-3-chengzhihao1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Add errseq in journal, so that JBD2 can detect whether metadata is
successfully written to fs bdev. This patch adds detection in recovery
process to replace original solution(using local variable wb_err).
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20231213013224.2100050-2-chengzhihao1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
After first execution of mb_find_order_for_block():
'fe_start' is the value of 'block' passed in mb_find_extent().
'fe_len' is the difference between the length of order-chunk and
remainder of the block divided by order-chunk.
And 'next' does not require initialization after above modifications.
Signed-off-by: Gou Hao <gouhao@uniontech.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20231113082617.11258-1-gouhao@uniontech.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
As an optimization, I was trying to work on exiting early from this
function if dealing with unwritten extent since they anyways read 0.
However, it was realised that there are certain code paths that can
end up calling ext4_block_zero_page_range() for an unwritten bh that
might still have data in pagecache. In this case, we can't exit early
and we do require to process the bh and zero out the pagecache to ensure
that a writeback can't kick in at a later time and flush the stale
pagecache to disk.
Since, adding the logic to exit early for unwritten bh was turning out
to be much more nuanced and the current code already handles it well,
just add a comment to explicitly document this behavior.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/d859b7ae5fe42e6626479b91ed9f4da3aae4c597.1698856309.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
The call to filemap_write_and_wait_range() assumes the range passed to be
inclusive, so fix the call to make sure we follow that.
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/e503107a7c73a2b68dec645c5ad798c437717c45.1698856309.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
dioread_nolock was originally disabled as a default option for bs < ps
scenarios due to a data corruption issue. Since then, we've had some
fixes in this area which address such issues. Enable dioread_nolock by
default and remove the experimental warning message for bs < ps path.
dioread for bs < ps has been tested on a 64k pagesize machine using:
kvm-xfstest -C 3 -g auto
with the following configs:
64k adv bigalloc_4k bigalloc_64k data_journal encrypt
dioread_nolock dioread_nolock_4k ext3 ext3conv nojournal
And no new regressions were seen compared to baseline kernel.
Suggested-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20231101154717.531865-1-ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
'blocks_per_page' is always 1 after 'if (blocks_per_page >= 2)',
'pnum' and 'block' are equal in this case.
Signed-off-by: Gou Hao <gouhao@uniontech.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20231024035215.29474-1-gouhao@uniontech.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
It's not safe to call nfsd_put once nfsd_last_thread has been called, as
that function will zero out the nn->nfsd_serv pointer.
Drop the nfsd_put helper altogether and open-code the svc_put in its
callers instead. That allows us to not be reliant on the value of that
pointer when handling an error.
Fixes: 2a501f55cd64 ("nfsd: call nfsd_last_thread() before final nfsd_put()")
Reported-by: Zhi Li <yieli@redhat.com>
Cc: NeilBrown <neilb@suse.de>
Signed-off-by: Jeffrey Layton <jlayton@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/broadcom/bnxt/bnxt.c
e009b2efb7a8 ("bnxt_en: Remove mis-applied code from bnxt_cfg_ntp_filters()")
0f2b21477988 ("bnxt_en: Fix compile error without CONFIG_RFS_ACCEL")
https://lore.kernel.org/all/20240105115509.225aa8a2@canb.auug.org.au/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As the ei->entries array is fixed for the duration of the eventfs_inode,
it can be used to skip over already read entries in eventfs_iterate().
That is, if ctx->pos is greater than zero, there's no reason in doing the
loop across the ei->entries array for the entries less than ctx->pos.
Instead, start the lookup of the entries at the current ctx->pos.
Link: https://lore.kernel.org/all/CAHk-=wiKwDUDv3+jCsv-uacDcHDVTYsXtBR9=6sGM5mqX+DhOg@mail.gmail.com/
Link: https://lore.kernel.org/linux-trace-kernel/20240104220048.494956957@goodmis.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
In order to apply a shortcut to skip over the current ctx->pos
immediately, by using the ei->entries array, the reading of that array
should be first. Moving the array reading before the linked list reading
will make the shortcut change diff nicer to read.
Link: https://lore.kernel.org/all/CAHk-=wiKwDUDv3+jCsv-uacDcHDVTYsXtBR9=6sGM5mqX+DhOg@mail.gmail.com/
Link: https://lore.kernel.org/linux-trace-kernel/20240104220048.333115095@goodmis.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The ctx->pos was only updated when it added an entry, but the "skip to
current pos" check (c--) happened for every loop regardless of if the
entry was added or not. This inconsistency caused readdir to be incorrect.
It was due to:
for (i = 0; i < ei->nr_entries; i++) {
if (c > 0) {
c--;
continue;
}
mutex_lock(&eventfs_mutex);
/* If ei->is_freed then just bail here, nothing more to do */
if (ei->is_freed) {
mutex_unlock(&eventfs_mutex);
goto out;
}
r = entry->callback(name, &mode, &cdata, &fops);
mutex_unlock(&eventfs_mutex);
[..]
ctx->pos++;
}
But this can cause the iterator to return a file that was already read.
That's because of the way the callback() works. Some events may not have
all files, and the callback can return 0 to tell eventfs to skip the file
for this directory.
for instance, we have:
# ls /sys/kernel/tracing/events/ftrace/function
format hist hist_debug id inject
and
# ls /sys/kernel/tracing/events/sched/sched_switch/
enable filter format hist hist_debug id inject trigger
Where the function directory is missing "enable", "filter" and
"trigger". That's because the callback() for events has:
static int event_callback(const char *name, umode_t *mode, void **data,
const struct file_operations **fops)
{
struct trace_event_file *file = *data;
struct trace_event_call *call = file->event_call;
[..]
/*
* Only event directories that can be enabled should have
* triggers or filters, with the exception of the "print"
* event that can have a "trigger" file.
*/
if (!(call->flags & TRACE_EVENT_FL_IGNORE_ENABLE)) {
if (call->class->reg && strcmp(name, "enable") == 0) {
*mode = TRACE_MODE_WRITE;
*fops = &ftrace_enable_fops;
return 1;
}
if (strcmp(name, "filter") == 0) {
*mode = TRACE_MODE_WRITE;
*fops = &ftrace_event_filter_fops;
return 1;
}
}
if (!(call->flags & TRACE_EVENT_FL_IGNORE_ENABLE) ||
strcmp(trace_event_name(call), "print") == 0) {
if (strcmp(name, "trigger") == 0) {
*mode = TRACE_MODE_WRITE;
*fops = &event_trigger_fops;
return 1;
}
}
[..]
return 0;
}
Where the function event has the TRACE_EVENT_FL_IGNORE_ENABLE set.
This means that the entries array elements for "enable", "filter" and
"trigger" when called on the function event will have the callback return
0 and not 1, to tell eventfs to skip these files for it.
Because the "skip to current ctx->pos" check happened for all entries, but
the ctx->pos++ only happened to entries that exist, it would confuse the
reading of a directory. Which would cause:
# ls /sys/kernel/tracing/events/ftrace/function/
format hist hist hist_debug hist_debug id inject inject
The missing "enable", "filter" and "trigger" caused ls to show "hist",
"hist_debug" and "inject" twice.
Update the ctx->pos for every iteration to keep its update and the "skip"
update consistent. This also means that on error, the ctx->pos needs to be
decremented if it was incremented without adding something.
Link: https://lore.kernel.org/all/20240104150500.38b15a62@gandalf.local.home/
Link: https://lore.kernel.org/linux-trace-kernel/20240104220048.172295263@goodmis.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes: 493ec81a8fb8e ("eventfs: Stop using dcache_readdir() for getdents()")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
If ei->is_freed is set in eventfs_iterate(), it means that the directory
that is being iterated on is in the process of being freed. Just exit the
loop immediately when that is ever detected, and separate out the return
of the entry->callback() from ei->is_freed.
Link: https://lore.kernel.org/linux-trace-kernel/20240104220048.016261289@goodmis.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
For backchannel requests that lookup the appropriate nfs_client, use the
state-management rpc_clnt's rpc_timeout parameters for the backchannel's
response. When the nfs_client cannot be found, fall back to using the
xprt's default timeout parameters.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Tested-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
bpf_cgroup_from_id() is basically a wrapper to cgroup_get_from_id(),
that is relying on kernfs to determine the right cgroup associated to
the target id.
As a kfunc, it has the potential to be attached to any function through
BPF, particularly in contexts where certain locks are held.
However, kernfs is not using an irq safe spinlock for kernfs_idr_lock,
that means any kernfs function that is acquiring this lock can be
interrupted and potentially hit bpf_cgroup_from_id() in the process,
triggering a deadlock.
For example, it is really easy to trigger a lockdep splat between
kernfs_idr_lock and rq->_lock, attaching a small BPF program to
__set_cpus_allowed_ptr_locked() that just calls bpf_cgroup_from_id():
=====================================================
WARNING: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected
6.7.0-rc7-virtme #5 Not tainted
-----------------------------------------------------
repro/131 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:
ffffffffb2dc4578 (kernfs_idr_lock){+.+.}-{2:2}, at: kernfs_find_and_get_node_by_id+0x1d/0x80
and this task is already holding:
ffff911cbecaf218 (&rq->__lock){-.-.}-{2:2}, at: task_rq_lock+0x50/0xc0
which would create a new lock dependency:
(&rq->__lock){-.-.}-{2:2} -> (kernfs_idr_lock){+.+.}-{2:2}
but this new dependency connects a HARDIRQ-irq-safe lock:
(&rq->__lock){-.-.}-{2:2}
... which became HARDIRQ-irq-safe at:
lock_acquire+0xbf/0x2b0
_raw_spin_lock_nested+0x2e/0x40
scheduler_tick+0x5d/0x170
update_process_times+0x9c/0xb0
tick_periodic+0x27/0xe0
tick_handle_periodic+0x24/0x70
__sysvec_apic_timer_interrupt+0x64/0x1a0
sysvec_apic_timer_interrupt+0x6f/0x80
asm_sysvec_apic_timer_interrupt+0x1a/0x20
memcpy+0xc/0x20
arch_dup_task_struct+0x15/0x30
copy_process+0x1ce/0x1eb0
kernel_clone+0xac/0x390
kernel_thread+0x6f/0xa0
kthreadd+0x199/0x230
ret_from_fork+0x31/0x50
ret_from_fork_asm+0x1b/0x30
to a HARDIRQ-irq-unsafe lock:
(kernfs_idr_lock){+.+.}-{2:2}
... which became HARDIRQ-irq-unsafe at:
...
lock_acquire+0xbf/0x2b0
_raw_spin_lock+0x30/0x40
__kernfs_new_node.isra.0+0x83/0x280
kernfs_create_root+0xf6/0x1d0
sysfs_init+0x1b/0x70
mnt_init+0xd9/0x2a0
vfs_caches_init+0xcf/0xe0
start_kernel+0x58a/0x6a0
x86_64_start_reservations+0x18/0x30
x86_64_start_kernel+0xc5/0xe0
secondary_startup_64_no_verify+0x178/0x17b
other info that might help us debug this:
Possible interrupt unsafe locking scenario:
CPU0 CPU1
---- ----
lock(kernfs_idr_lock);
local_irq_disable();
lock(&rq->__lock);
lock(kernfs_idr_lock);
<Interrupt>
lock(&rq->__lock);
*** DEADLOCK ***
Prevent this deadlock condition converting kernfs_idr_lock to a raw irq
safe spinlock.
The performance impact of this change should be negligible and it also
helps to prevent similar deadlock conditions with any other subsystems
that may depend on kernfs.
Fixes: 332ea1f697be ("bpf: Add bpf_cgroup_from_id() kfunc")
Cc: stable <stable@kernel.org>
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20231229074916.53547-1-andrea.righi@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The kfree() function was called in one case by
the bl_resolve_deviceid() function during error handling
even if the passed data structure member contained a null pointer.
This issue was detected by using the Coccinelle software.
Thus use an other label.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
NFS already has writepages and migrate_folio, so it does not need to
implement writepage. The writepage operation is deprecated as it leads
to worse performance under high memory pressure due to folios being
written out in LRU order rather than sequentially within a file.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Now that we're calculating how large a remaining IO should be based
on the current request's offset, we no longer need to track bytes_left on
each struct nfs_direct_req. Drop the field, and clean up the direct
request tracepoints.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Instead of relying on the value of the 'bytes_left' field, we should
calculate the layout size based on the offset of the request that is
being written out.
Reported-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Fixes: 954998b60caa ("NFS: Fix error handling for O_DIRECT write scheduling")
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Tested-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
With this we can see the dentry -> inode linkage that's being
revalidated. A fileid of 0 means "negative dentry".
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
We do async renames in other cases besides sillyrenames now. This
tracepoint name is now misleading.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Add a call to the v4 d_revalidate entrypoint, just like the v3 one.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Once the client has processed the CB_LAYOUTRECALL, but has not yet
successfully returned the layout, the server is supposed to switch to
returning NFS4ERR_RETURNCONFLICT. This patch ensures that we handle
that return value correctly.
Fixes: 183d9e7b112a ("pnfs: rework LAYOUTGET retry handling")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
If the server is recalling a layout, and sends us a list of referring
calls that we can see are complete, then we should just trust that the
stateid argument is correct, even if the sequence id doesn't match the
one we hold.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
When the server gives us a set of referring calls, to tell us that the
NFSv4.1 callback needs to be ordered with respect to those calls, then
we may want to make that information available to the operations. In
certain cases, it may allow them to optimise their behaviour due to the
extra knowledge.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
The subjective cred (task->cred) can potentially be overridden and
subsquently freed in non-RCU context, which could lead to a panic if we
try to use it in cred_fscmp(). Use __task_cred(), which returns the
objective cred (task->real_cred) instead.
Fixes: 0eb43812c027 ("NFS: Clear the file access cache upon login")
Fixes: 5e9a7b9c2ea1 ("NFS: Fix up a sparse warning")
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Again we have claimed regressions for walking a directory tree, this time
with the "find" utility which always tries to optimize away asking for any
attributes until it has a complete list of entries. This behavior makes
the readdir plus heuristic do the wrong thing, which causes a storm of
GETATTRs to determine each entry's type in order to continue the walk.
For v4 add the type attribute to each READDIR request to include it no
matter the heuristic. This allows a simple `find` command to proceed
quickly through a directory tree.
Suggested-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
We noticed a SCSI device that refused to allow READ CAPACITY when the
device had a PR with exclusive access, registrants only. The result of
this situation is that the blocklayout driver adds a pnfs_block_dev of zero
length which always fails the offset_in_map tests. Instead of continuously
trying to do pNFS for this case, just mark the device as unavailable which
will allow the client to fallback to the MDS for the duration of
PNFS_DEVICE_RETRY_TIMEOUT.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
The error path for blocklayout's device lookup is missing a reference drop
for the case where a lookup finds the device, but the device is marked with
NFS_DEVICEID_UNAVAILABLE.
Fixes: b3dce6a2f060 ("pnfs/blocklayout: handle transient devices")
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Fix the proc/fs/fscache symlink to point to "netfs" not "../netfs".
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: Christian Brauner <christian@brauner.io>
cc: linux-fsdevel@vger.kernel.org
cc: linux-cachefs@redhat.com
|
|
In v9fs_upload_to_server(), we pass the error to netfslib to terminate the
subreq rather than the amount of data written - even if we did actually
write something.
Further, we assume that the write is always entirely done if successful -
but it might have been partially complete - as returned by
p9_client_write(), but we ignore that.
Fix this by indicating the amount written by preference and only returning
the error if we didn't write anything.
(We might want to return both in future if both are available as this
might be useful as to whether we retry or not.)
Suggested-by: Dominique Martinet <asmadeus@codewreck.org>
Link: https://lore.kernel.org/r/ZZULNQAZ0n0WQv7p@codewreck.org/
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Dominique Martinet <asmadeus@codewreck.org>
cc: Eric Van Hensbergen <ericvh@kernel.org>
cc: Latchesar Ionkov <lucho@ionkov.net>
cc: Christian Schoenebeck <linux_oss@crudebyte.com>
cc: v9fs@lists.linux.dev
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
|
|
Do a couple of cleanups to 9p:
(1) Remove a couple of unused variables.
(2) Turn a BUG_ON() into a warning, consolidate with another warning and
make the warning message include the inode number rather than
whatever's in i_private (which will get hashed anyway).
Suggested-by: Dominique Martinet <asmadeus@codewreck.org>
Link: https://lore.kernel.org/r/ZZULNQAZ0n0WQv7p@codewreck.org/
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Dominique Martinet <asmadeus@codewreck.org>
cc: Eric Van Hensbergen <ericvh@kernel.org>
cc: Latchesar Ionkov <lucho@ionkov.net>
cc: Christian Schoenebeck <linux_oss@crudebyte.com>
cc: v9fs@lists.linux.dev
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
|
|
Merge an ACPI power management change, ACPI backlight driver changes, APEI
updates and ACPI extlog driver changes for 6.8-rc1:
- Modify the ACPI LPIT table handling code to avoid u32 multiplication
overflows in state residency computations (Nikita Kiryushin).
- Drop an unused helper function from the ACPI backlight (video) driver
and add a clarifying comment to it (Hans de Goede).
- Update the ACPI backlight driver to avoid using uninitialized memory
in some cases (Nikita Kiryushin).
- Add ACPI backlight quirk for the Colorful X15 AT 23 laptop (Yuluo
Qiu).
- Add support for vendor-defined error types to the ACPI APEI error
injection code (Avadhut Naik).
- Adjust APEI to properly set MF_ACTION_REQUIRED on synchronous memory
failure events, so they are handled differently from the asynchronous
ones (Shuai Xue).
- Fix NULL pointer dereference check in the ACPI extlog driver (Prarit
Bhargava).
- Adjust the ACPI extlog driver to clear the Extended Error Log status
when RAS_CEC handled the error (Tony Luck).
* acpi-pm:
ACPI: LPIT: Avoid u32 multiplication overflow
* acpi-video:
ACPI: video: Add quirk for the Colorful X15 AT 23 Laptop
ACPI: video: check for error while searching for backlight device parent
ACPI: video: Drop should_check_lcd_flag()
ACPI: video: Add comment about acpi_video_backlight_use_native() usage
* acpi-apei:
ACPI: APEI: set memory failure flags as MF_ACTION_REQUIRED on synchronous events
ACPI: APEI: EINJ: Add support for vendor defined error types
platform/chrome: cros_ec_debugfs: Fix permissions for panicinfo
fs: debugfs: Add write functionality to debugfs blobs
ACPI: APEI: EINJ: Refactor available_error_type_show()
* acpi-extlog:
ACPI: extlog: Clear Extended Error Log status when RAS_CEC handled the error
ACPI: extlog: fix NULL pointer dereference check
|
|
Instead of walking the dentries on mount/remount to update the gid values of
all the dentries if a gid option is specified on mount, just update the root
inode. Add .getattr, .setattr, and .permissions on the tracefs inode
operations to update the permissions of the files and directories.
For all files and directories in the top level instance:
/sys/kernel/tracing/*
It will use the root inode as the default permissions. The inode that
represents: /sys/kernel/tracing (or wherever it is mounted).
When an instance is created:
mkdir /sys/kernel/tracing/instance/foo
The directory "foo" and all its files and directories underneath will use
the default of what foo is when it was created. A remount of tracefs will
not affect it.
If a user were to modify the permissions of any file or directory in
tracefs, it will also no longer be modified by a change in ownership of a
remount.
The events directory, if it is in the top level instance, will use the
tracefs root inode as the default ownership for itself and all the files and
directories below it.
For the events directory in an instance ("foo"), it will keep the ownership
of what it was when it was created, and that will be used as the default
ownership for the files and directories beneath it.
Link: https://lore.kernel.org/linux-trace-kernel/CAHk-=wjVdGkjDXBbvLn2wbZnqP4UsH46E3gqJ9m7UG6DpX2+WA@mail.gmail.com/
Link: https://lore.kernel.org/linux-trace-kernel/20240103215016.1e0c9811@gandalf.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
