| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[ Upstream commit a71248b1accb2b42e4980afef4fa4a27fa0e36f5 ]
I caught a issue as follows:
==================================================================
BUG: KASAN: use-after-free in __list_add_valid+0x28/0x1a0
Read of size 8 at addr ffff88814b13f378 by task mount/710
CPU: 1 PID: 710 Comm: mount Not tainted 6.1.0-rc3-next #370
Call Trace:
<TASK>
dump_stack_lvl+0x73/0x9f
print_report+0x25d/0x759
kasan_report+0xc0/0x120
__asan_load8+0x99/0x140
__list_add_valid+0x28/0x1a0
ext4_orphan_cleanup+0x564/0x9d0 [ext4]
__ext4_fill_super+0x48e2/0x5300 [ext4]
ext4_fill_super+0x19f/0x3a0 [ext4]
get_tree_bdev+0x27b/0x450
ext4_get_tree+0x19/0x30 [ext4]
vfs_get_tree+0x49/0x150
path_mount+0xaae/0x1350
do_mount+0xe2/0x110
__x64_sys_mount+0xf0/0x190
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
</TASK>
[...]
==================================================================
Above issue may happen as follows:
-------------------------------------
ext4_fill_super
ext4_orphan_cleanup
--- loop1: assume last_orphan is 12 ---
list_add(&EXT4_I(inode)->i_orphan, &EXT4_SB(sb)->s_orphan)
ext4_truncate --> return 0
ext4_inode_attach_jinode --> return -ENOMEM
iput(inode) --> free inode<12>
--- loop2: last_orphan is still 12 ---
list_add(&EXT4_I(inode)->i_orphan, &EXT4_SB(sb)->s_orphan);
// use inode<12> and trigger UAF
To solve this issue, we need to propagate the return value of
ext4_inode_attach_jinode() appropriately.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221102080633.1630225-1-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9a5d265fed014115f35e598022c956e5d2fb863e ]
It should call trace exit in all return path for ext4_truncate.
Signed-off-by: zhengliang <zhengliang6@huawei.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/20200701083027.45996-1-zhengliang6@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: a71248b1accb ("ext4: fix use-after-free in ext4_orphan_cleanup")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d323877484765aaacbb2769b06e355c2041ed115 ]
We got a issue as fllows:
==================================================================
kernel BUG at fs/ext4/extents_status.c:202!
invalid opcode: 0000 [#1] PREEMPT SMP
CPU: 1 PID: 810 Comm: mount Not tainted 6.1.0-rc1-next-g9631525255e3 #352
RIP: 0010:__es_tree_search.isra.0+0xb8/0xe0
RSP: 0018:ffffc90001227900 EFLAGS: 00010202
RAX: 0000000000000000 RBX: 0000000077512a0f RCX: 0000000000000000
RDX: 0000000000000002 RSI: 0000000000002a10 RDI: ffff8881004cd0c8
RBP: ffff888177512ac8 R08: 47ffffffffffffff R09: 0000000000000001
R10: 0000000000000001 R11: 00000000000679af R12: 0000000000002a10
R13: ffff888177512d88 R14: 0000000077512a10 R15: 0000000000000000
FS: 00007f4bd76dbc40(0000)GS:ffff88842fd00000(0000)knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005653bf993cf8 CR3: 000000017bfdf000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
ext4_es_cache_extent+0xe2/0x210
ext4_cache_extents+0xd2/0x110
ext4_find_extent+0x5d5/0x8c0
ext4_ext_map_blocks+0x9c/0x1d30
ext4_map_blocks+0x431/0xa50
ext4_getblk+0x82/0x340
ext4_bread+0x14/0x110
ext4_quota_read+0xf0/0x180
v2_read_header+0x24/0x90
v2_check_quota_file+0x2f/0xa0
dquot_load_quota_sb+0x26c/0x760
dquot_load_quota_inode+0xa5/0x190
ext4_enable_quotas+0x14c/0x300
__ext4_fill_super+0x31cc/0x32c0
ext4_fill_super+0x115/0x2d0
get_tree_bdev+0x1d2/0x360
ext4_get_tree+0x19/0x30
vfs_get_tree+0x26/0xe0
path_mount+0x81d/0xfc0
do_mount+0x8d/0xc0
__x64_sys_mount+0xc0/0x160
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
</TASK>
==================================================================
Above issue may happen as follows:
-------------------------------------
ext4_fill_super
ext4_orphan_cleanup
ext4_enable_quotas
ext4_quota_enable
ext4_iget --> get error inode <5>
ext4_ext_check_inode --> Wrong imode makes it escape inspection
make_bad_inode(inode) --> EXT4_BOOT_LOADER_INO set imode
dquot_load_quota_inode
vfs_setup_quota_inode --> check pass
dquot_load_quota_sb
v2_check_quota_file
v2_read_header
ext4_quota_read
ext4_bread
ext4_getblk
ext4_map_blocks
ext4_ext_map_blocks
ext4_find_extent
ext4_cache_extents
ext4_es_cache_extent
__es_tree_search.isra.0
ext4_es_end --> Wrong extents trigger BUG_ON
In the above issue, s_usr_quota_inum is set to 5, but inode<5> contains
incorrect imode and disordered extents. Because 5 is EXT4_BOOT_LOADER_INO,
the ext4_ext_check_inode check in the ext4_iget function can be bypassed,
finally, the extents that are not checked trigger the BUG_ON in the
__es_tree_search function. To solve this issue, check whether the inode is
bad_inode in vfs_setup_quota_inode().
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221026042310.3839669-2-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c7d3d28360fdb3ed3a5aa0bab19315e0fdc994a1 ]
Factor out setting up of quota inode and eventual error cleanup from
vfs_load_quota_inode(). This will simplify situation for filesystems
that don't have any quota inodes.
Signed-off-by: Jan Kara <jack@suse.cz>
Stable-dep-of: d32387748476 ("ext4: fix bug_on in __es_tree_search caused by bad quota inode")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit a152d05ae4a71d802d50cf9177dba34e8bb09f68 upstream.
If smb311 posix is enabled, we send the intended mode for file
creation in the posix create context. Instead of using what's there on
the stack, create the mfsymlink file with 0644.
Fixes: ce558b0e17f8a ("smb3: Add posix create context for smb3.11 posix mounts")
Cc: stable@vger.kernel.org
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Tom Talpey <tom@talpey.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5fc4cbd9fde5d4630494fd6ffc884148fb618087 upstream.
Commit 307af6c87937 ("mbcache: automatically delete entries from cache
on freeing") started nesting cache->c_list_lock under the bit locks
protecting hash buckets of the mbcache hash table in
mb_cache_entry_create(). This causes problems for real-time kernels
because there spinlocks are sleeping locks while bitlocks stay atomic.
Luckily the nesting is easy to avoid by holding entry reference until
the entry is added to the LRU list. This makes sure we cannot race with
entry deletion.
Cc: stable@kernel.org
Fixes: 307af6c87937 ("mbcache: automatically delete entries from cache on freeing")
Reported-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220908091032.10513-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit cb7a95af78d29442b8294683eca4897544b8ef46 upstream.
Commit 55d1cbbbb29e ("hfs/hfsplus: use WARN_ON for sanity check") fixed
a build warning by turning a comment into a WARN_ON(), but it turns out
that syzbot then complains because it can trigger said warning with a
corrupted hfs image.
The warning actually does warn about a bad situation, but we are much
better off just handling it as the error it is. So rather than warn
about us doing bad things, stop doing the bad things and return -EIO.
While at it, also fix a memory leak that was introduced by an earlier
fix for a similar syzbot warning situation, and add a check for one case
that historically wasn't handled at all (ie neither comment nor
subsequent WARN_ON).
Reported-by: syzbot+7bb7cd3595533513a9e7@syzkaller.appspotmail.com
Fixes: 55d1cbbbb29e ("hfs/hfsplus: use WARN_ON for sanity check")
Fixes: 8d824e69d9f3 ("hfs: fix OOB Read in __hfs_brec_find")
Link: https://lore.kernel.org/lkml/000000000000dbce4e05f170f289@google.com/
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Viacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 55d1cbbbb29e6656c662ee8f73ba1fc4777532eb upstream.
gcc warns about a couple of instances in which a sanity check exists but
the author wasn't sure how to react to it failing, which makes it look
like a possible bug:
fs/hfsplus/inode.c: In function 'hfsplus_cat_read_inode':
fs/hfsplus/inode.c:503:37: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body]
503 | /* panic? */;
| ^
fs/hfsplus/inode.c:524:37: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body]
524 | /* panic? */;
| ^
fs/hfsplus/inode.c: In function 'hfsplus_cat_write_inode':
fs/hfsplus/inode.c:582:37: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body]
582 | /* panic? */;
| ^
fs/hfsplus/inode.c:608:37: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body]
608 | /* panic? */;
| ^
fs/hfs/inode.c: In function 'hfs_write_inode':
fs/hfs/inode.c:464:37: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body]
464 | /* panic? */;
| ^
fs/hfs/inode.c:485:37: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body]
485 | /* panic? */;
| ^
panic() is probably not the correct choice here, but a WARN_ON
seems appropriate and avoids the compile-time warning.
Link: https://lkml.kernel.org/r/20210927102149.1809384-1-arnd@kernel.org
Link: https://lore.kernel.org/all/20210322223249.2632268-1-arnd@kernel.org/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 105c78e12468413e426625831faa7db4284e1fec upstream.
Mounting a filesystem whose journal inode has the encrypt flag causes a
NULL dereference in fscrypt_limit_io_blocks() when the 'inlinecrypt'
mount option is used.
The problem is that when jbd2_journal_init_inode() calls bmap(), it
eventually finds its way into ext4_iomap_begin(), which calls
fscrypt_limit_io_blocks(). fscrypt_limit_io_blocks() requires that if
the inode is encrypted, then its encryption key must already be set up.
That's not the case here, since the journal inode is never "opened" like
a normal file would be. Hence the crash.
A reproducer is:
mkfs.ext4 -F /dev/vdb
debugfs -w /dev/vdb -R "set_inode_field <8> flags 0x80808"
mount /dev/vdb /mnt -o inlinecrypt
To fix this, make ext4 consider journal inodes with the encrypt flag to
be invalid. (Note, maybe other flags should be rejected on the journal
inode too. For now, this is just the minimal fix for the above issue.)
I've marked this as fixing the commit that introduced the call to
fscrypt_limit_io_blocks(), since that's what made an actual crash start
being possible. But this fix could be applied to any version of ext4
that supports the encrypt feature.
Reported-by: syzbot+ba9dac45bc76c490b7c3@syzkaller.appspotmail.com
Fixes: 38ea50daa7a4 ("ext4: support direct I/O with fscrypt using blk-crypto")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20221102053312.189962-1-ebiggers@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit cad853374d85fe678d721512cecfabd7636e51f3 upstream.
If v4 READDIR operation hits a mountpoint and gets back an error,
then it will include that entry in the reply and set RDATTR_ERROR for it
to the error.
That's fine for "normal" exported filesystems, but on the v4root, we
need to be more careful to only expose the existence of dentries that
lead to exports.
If the mountd upcall times out while checking to see whether a
mountpoint on the v4root is exported, then we have no recourse other
than to fail the whole operation.
Cc: Steve Dickson <steved@redhat.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216777
Reported-by: JianHong Yin <yin-jianhong@163.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 83c7423d1eb6806d13c521d1002cc1a012111719 ]
When extending the last extent in the file within the last block, we
wrongly computed the length of the last extent. This is mostly a
cosmetical problem since the extent does not contain any data and the
length will be fixed up by following operations but still.
Fixes: 1f3868f06855 ("udf: Fix extending file within last block")
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 789e1e10f214c00ca18fc6610824c5b9876ba5f2 ]
Currently, we shut down the filecache before trying to clean up the
stateids that depend on it. This leads to the kernel trying to free an
nfsd_file twice, and a refcount overput on the nf_mark.
Change the shutdown procedure to tear down all of the stateids prior
to shutting down the filecache.
Reported-and-tested-by: Wang Yugui <wangyugui@e16-tech.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Fixes: 5e113224c17e ("nfsd: nfsd_file cache entries should be per net namespace")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a44e84a9b7764c72896f7241a0ec9ac7e7ef38dd ]
When manipulating xattr blocks, we can deadlock infinitely looping
inside ext4_xattr_block_set() where we constantly keep finding xattr
block for reuse in mbcache but we are unable to reuse it because its
reference count is too big. This happens because cache entry for the
xattr block is marked as reusable (e_reusable set) although its
reference count is too big. When this inconsistency happens, this
inconsistent state is kept indefinitely and so ext4_xattr_block_set()
keeps retrying indefinitely.
The inconsistent state is caused by non-atomic update of e_reusable bit.
e_reusable is part of a bitfield and e_reusable update can race with
update of e_referenced bit in the same bitfield resulting in loss of one
of the updates. Fix the problem by using atomic bitops instead.
This bug has been around for many years, but it became *much* easier
to hit after commit 65f8b80053a1 ("ext4: fix race when reusing xattr
blocks").
Cc: stable@vger.kernel.org
Fixes: 6048c64b2609 ("mbcache: add reusable flag to cache entries")
Fixes: 65f8b80053a1 ("ext4: fix race when reusing xattr blocks")
Reported-and-tested-by: Jeremi Piotrowski <jpiotrowski@linux.microsoft.com>
Reported-by: Thilo Fromm <t-lo@linux.microsoft.com>
Link: https://lore.kernel.org/r/c77bf00f-4618-7149-56f1-b8d1664b9d07@linux.microsoft.com/
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20221123193950.16758-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 307af6c879377c1c63e71cbdd978201f9c7ee8df ]
Use the fact that entries with elevated refcount are not removed from
the hash and just move removal of the entry from the hash to the entry
freeing time. When doing this we also change the generic code to hold
one reference to the cache entry, not two of them, which makes code
somewhat more obvious.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220712105436.32204-10-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: a44e84a9b776 ("ext4: fix deadlock due to mbcache entry corruption")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 65f8b80053a1b2fd602daa6814e62d6fa90e5e9b ]
When ext4_xattr_block_set() decides to remove xattr block the following
race can happen:
CPU1 CPU2
ext4_xattr_block_set() ext4_xattr_release_block()
new_bh = ext4_xattr_block_cache_find()
lock_buffer(bh);
ref = le32_to_cpu(BHDR(bh)->h_refcount);
if (ref == 1) {
...
mb_cache_entry_delete();
unlock_buffer(bh);
ext4_free_blocks();
...
ext4_forget(..., bh, ...);
jbd2_journal_revoke(..., bh);
ext4_journal_get_write_access(..., new_bh, ...)
do_get_write_access()
jbd2_journal_cancel_revoke(..., new_bh);
Later the code in ext4_xattr_block_set() finds out the block got freed
and cancels reusal of the block but the revoke stays canceled and so in
case of block reuse and journal replay the filesystem can get corrupted.
If the race works out slightly differently, we can also hit assertions
in the jbd2 code.
Fix the problem by making sure that once matching mbcache entry is
found, code dropping the last xattr block reference (or trying to modify
xattr block in place) waits until the mbcache entry reference is
dropped. This way code trying to reuse xattr block is protected from
someone trying to drop the last reference to xattr block.
Reported-and-tested-by: Ritesh Harjani <ritesh.list@gmail.com>
CC: stable@vger.kernel.org
Fixes: 82939d7999df ("ext4: convert to mbcache2")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220712105436.32204-5-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: a44e84a9b776 ("ext4: fix deadlock due to mbcache entry corruption")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fd48e9acdf26d0cbd80051de07d4a735d05d29b2 ]
Remove unnecessary else (and thus indentation level) from a code block
in ext4_xattr_block_set(). It will also make following code changes
easier. No functional changes.
CC: stable@vger.kernel.org
Fixes: 82939d7999df ("ext4: convert to mbcache2")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220712105436.32204-4-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: a44e84a9b776 ("ext4: fix deadlock due to mbcache entry corruption")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6bc0d63dad7f9f54d381925ee855b402f652fa39 ]
Currently we remove EA inode from mbcache as soon as its xattr refcount
drops to zero. However there can be pending attempts to reuse the inode
and thus refcount handling code has to handle the situation when
refcount increases from zero anyway. So save some work and just keep EA
inode in mbcache until it is getting evicted. At that moment we are sure
following iget() of EA inode will fail anyway (or wait for eviction to
finish and load things from the disk again) and so removing mbcache
entry at that moment is fine and simplifies the code a bit.
CC: stable@vger.kernel.org
Fixes: 82939d7999df ("ext4: convert to mbcache2")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220712105436.32204-3-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: a44e84a9b776 ("ext4: fix deadlock due to mbcache entry corruption")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3dc96bba65f53daa217f0a8f43edad145286a8f5 ]
Add function mb_cache_entry_delete_or_get() to delete mbcache entry if
it is unused and also add a function to wait for entry to become unused
- mb_cache_entry_wait_unused(). We do not share code between the two
deleting function as one of them will go away soon.
CC: stable@vger.kernel.org
Fixes: 82939d7999df ("ext4: convert to mbcache2")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220712105436.32204-2-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: a44e84a9b776 ("ext4: fix deadlock due to mbcache entry corruption")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 58318914186c157477b978b1739dfe2f1b9dc0fe ]
Do not reclaim entries that are currently used by somebody from a
shrinker. Firstly, these entries are likely useful. Secondly, we will
need to keep such entries to protect pending increment of xattr block
refcount.
CC: stable@vger.kernel.org
Fixes: 82939d7999df ("ext4: convert to mbcache2")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220712105436.32204-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: a44e84a9b776 ("ext4: fix deadlock due to mbcache entry corruption")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4efd9f0d120c55b08852ee5605dbb02a77089a5d ]
Replace kmalloc + memcpy with kmemdup()
Signed-off-by: Shuqi Zhang <zhangshuqi3@huawei.com>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220525030120.803330-1-zhangshuqi3@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: a44e84a9b776 ("ext4: fix deadlock due to mbcache entry corruption")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 956510c0c7439e90b8103aaeaf4da92878c622f0 ]
When aops->write_begin() does not initialize fsdata, KMSAN reports
an error passing the latter to aops->write_end().
Fix this by unconditionally initializing fsdata.
Cc: Eric Biggers <ebiggers@kernel.org>
Fixes: c93d8f885809 ("ext4: add basic fs-verity support")
Reported-by: syzbot+9767be679ef5016b6082@syzkaller.appspotmail.com
Signed-off-by: Alexander Potapenko <glider@google.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20221121112134.407362-1-glider@google.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bd256fda92efe97b692dc72e246d35fa724d42d8 ]
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Link: https://lore.kernel.org/r/20210207190425.38107-7-chaitanya.kulkarni@wdc.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: 956510c0c743 ("fs: ext4: initialize fsdata in pagecache_write()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 89481b5fa8c0640e62ba84c6020cee895f7ac643 ]
When we used the journal_async_commit mounting option in nojournal mode,
the kernel told me that "can't mount with journal_checksum", was very
confusing. I find that when we mount with journal_async_commit, both the
JOURNAL_ASYNC_COMMIT and EXPLICIT_JOURNAL_CHECKSUM flags are set. However,
in the error branch, CHECKSUM is checked before ASYNC_COMMIT. As a result,
the above inconsistency occurs, and the ASYNC_COMMIT branch becomes dead
code that cannot be executed. Therefore, we exchange the positions of the
two judgments to make the error msg more accurate.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221109074343.4184862-1-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 43bd6f1b49b61f43de4d4e33661b8dbe8c911f14 ]
Before these two branches neither loaded the journal nor created the
xattr cache. So the right label to goto is 'failed_mount3a'. Although
this did not cause any issues because the error handler validated if the
pointer is null. However this still made me confused when reading
the code. So it's still worth to modify to goto the right label.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220916141527.1012715-2-yanaijie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: 89481b5fa8c0 ("ext4: correct inconsistent error msg in nojournal mode")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 63d5429f68a3d4c4aa27e65a05196c17f86c41d6 ]
Using strncpy() on NUL-terminated strings are deprecated. To avoid
possible forming of non-terminated string strscpy() should be used.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
CC: stable@vger.kernel.org # 4.9+
Signed-off-by: Artem Chernyshev <artem.chernyshev@red-soft.ru>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit cc12a6f25e07ed05d5825a1664b67a970842b2ca upstream.
Now, extended attribute value maximum length is 64K. The memory
requested here does not need continuous physical addresses, so it is
appropriate to use kvmalloc to request memory. At the same time, it
can also cope with the situation that the extended attribute will
become longer in the future.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221208023233.1231330-3-yebin@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8994d11395f8165b3deca1971946f549f0822630 upstream.
When expanding inode space in ext4_expand_extra_isize_ea() we may need
to allocate external xattr block. If quota is not initialized for the
inode, the block allocation will not be accounted into quota usage. Make
sure the quota is initialized before we try to expand inode space.
Reported-by: Pengfei Xu <pengfei.xu@intel.com>
Link: https://lore.kernel.org/all/Y5BT+k6xWqthZc1P@xpf.sh.intel.com
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20221207115937.26601-2-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1485f726c6dec1a1f85438f2962feaa3d585526f upstream.
Make sure we initialize quotas before possibly expanding inode space
(and thus maybe needing to allocate external xattr block) in
ext4_ioctl_setproject(). This prevents not accounting the necessary
block allocation.
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20221207115937.26601-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e4db04f7d3dbbe16680e0ded27ea2a65b10f766a upstream.
There is issue as follows when do setxattr with inject fault:
[localhost]# fsck.ext4 -fn /dev/sda
e2fsck 1.46.6-rc1 (12-Sep-2022)
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Unattached zero-length inode 15. Clear? no
Unattached inode 15
Connect to /lost+found? no
Pass 5: Checking group summary information
/dev/sda: ********** WARNING: Filesystem still has errors **********
/dev/sda: 15/655360 files (0.0% non-contiguous), 66755/2621440 blocks
This occurs in 'ext4_xattr_inode_create()'. If 'ext4_mark_inode_dirty()'
fails, dropping i_nlink of the inode is needed. Or will lead to inode leak.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221208023233.1231330-5-yebin@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b40ebaf63851b3a401b0dc9263843538f64f5ce6 upstream.
Commit fb0a387dcdcd ("ext4: limit block allocations for indirect-block
files to < 2^32") added code to try to allocate xattr block with 32-bit
block number for indirect block based files on the grounds that these
files cannot use larger block numbers. It also added BUG_ON when
allocated block could not fit into 32 bits. This is however bogus
reasoning because xattr block is stored in inode->i_file_acl and
inode->i_file_acl_hi and as such even indirect block based files can
happily use full 48 bits for xattr block number. The proper handling
seems to be there basically since 64-bit block number support was added.
So remove the bogus limitation and BUG_ON.
Cc: Eric Sandeen <sandeen@redhat.com>
Fixes: fb0a387dcdcd ("ext4: limit block allocations for indirect-block files to < 2^32")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221121130929.32031-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 26d75a16af285a70863ba6a81f85d81e7e65da50 upstream.
If a block is out of range in ext4_get_branch(), -ENOMEM will be returned
to user-space. Obviously, this error code isn't really useful. This
patch fixes it by making sure the right error code (-EFSCORRUPTED) is
propagated to user-space. EUCLEAN is more informative than ENOMEM.
Signed-off-by: Luís Henriques <lhenriques@suse.de>
Link: https://lore.kernel.org/r/20221109181445.17843-1-lhenriques@suse.de
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0aeaa2559d6d53358fca3e3fce73807367adca74 upstream.
When a backup superblock is updated in update_backups(), the primary
superblock's offset in the group (that is, sbi->s_sbh->b_blocknr) is used
as the backup superblock's offset in its group. However, when the block
size is 1K and bigalloc is enabled, the two offsets are not equal. This
causes the backup group descriptors to be overwritten by the superblock
in update_backups(). Moreover, if meta_bg is enabled, the file system will
be corrupted because this feature uses backup group descriptors.
To solve this issue, we use a more accurate ext4_group_first_block_no() as
the offset of the backup superblock in its group.
Fixes: d77147ff443b ("ext4: add support for online resizing with bigalloc")
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20221117040341.1380702-4-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 131294c35ed6f777bd4e79d42af13b5c41bf2775 upstream.
When converting files with inline data to extents, delayed allocations
made on a file system created with both the bigalloc and inline options
can result in invalid extent status cache content, incorrect reserved
cluster counts, kernel memory leaks, and potential kernel panics.
With bigalloc, the code that determines whether a block must be
delayed allocated searches the extent tree to see if that block maps
to a previously allocated cluster. If not, the block is delayed
allocated, and otherwise, it isn't. However, if the inline option is
also used, and if the file containing the block is marked as able to
store data inline, there isn't a valid extent tree associated with
the file. The current code in ext4_clu_mapped() calls
ext4_find_extent() to search the non-existent tree for a previously
allocated cluster anyway, which typically finds nothing, as desired.
However, a side effect of the search can be to cache invalid content
from the non-existent tree (garbage) in the extent status tree,
including bogus entries in the pending reservation tree.
To fix this, avoid searching the extent tree when allocating blocks
for bigalloc + inline files that are being converted from inline to
extent mapped.
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Link: https://lore.kernel.org/r/20221117152207.2424-1-enwlinux@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fae381a3d79bb94aa2eb752170d47458d778b797 upstream.
Syzbot found the following issue:
ext4_parse_param: s_want_extra_isize=128
ext4_inode_info_init: s_want_extra_isize=32
ext4_rename: old.inode=ffff88823869a2c8 old.dir=ffff888238699828 new.inode=ffff88823869d7e8 new.dir=ffff888238699828
__ext4_mark_inode_dirty: inode=ffff888238699828 ea_isize=32 want_ea_size=128
__ext4_mark_inode_dirty: inode=ffff88823869a2c8 ea_isize=32 want_ea_size=128
ext4_xattr_block_set: inode=ffff88823869a2c8
------------[ cut here ]------------
WARNING: CPU: 13 PID: 2234 at fs/ext4/xattr.c:2070 ext4_xattr_block_set.cold+0x22/0x980
Modules linked in:
RIP: 0010:ext4_xattr_block_set.cold+0x22/0x980
RSP: 0018:ffff888227d3f3b0 EFLAGS: 00010202
RAX: 0000000000000001 RBX: ffff88823007a000 RCX: 0000000000000000
RDX: 0000000000000a03 RSI: 0000000000000040 RDI: ffff888230078178
RBP: 0000000000000000 R08: 000000000000002c R09: ffffed1075c7df8e
R10: ffff8883ae3efc6b R11: ffffed1075c7df8d R12: 0000000000000000
R13: ffff88823869a2c8 R14: ffff8881012e0460 R15: dffffc0000000000
FS: 00007f350ac1f740(0000) GS:ffff8883ae200000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f350a6ed6a0 CR3: 0000000237456000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
? ext4_xattr_set_entry+0x3b7/0x2320
? ext4_xattr_block_set+0x0/0x2020
? ext4_xattr_set_entry+0x0/0x2320
? ext4_xattr_check_entries+0x77/0x310
? ext4_xattr_ibody_set+0x23b/0x340
ext4_xattr_move_to_block+0x594/0x720
ext4_expand_extra_isize_ea+0x59a/0x10f0
__ext4_expand_extra_isize+0x278/0x3f0
__ext4_mark_inode_dirty.cold+0x347/0x410
ext4_rename+0xed3/0x174f
vfs_rename+0x13a7/0x2510
do_renameat2+0x55d/0x920
__x64_sys_rename+0x7d/0xb0
do_syscall_64+0x3b/0xa0
entry_SYSCALL_64_after_hwframe+0x72/0xdc
As 'ext4_rename' will modify 'old.inode' ctime and mark inode dirty,
which may trigger expand 'extra_isize' and allocate block. If inode
didn't init quota will lead to warning. To solve above issue, init
'old.inode' firstly in 'ext4_rename'.
Reported-by: syzbot+98346927678ac3059c77@syzkaller.appspotmail.com
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221107015335.2524319-1-yebin@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 991ed014de0840c5dc405b679168924afb2952ac upstream.
We got a issue as fllows:
==================================================================
kernel BUG at fs/ext4/extents_status.c:203!
invalid opcode: 0000 [#1] PREEMPT SMP
CPU: 1 PID: 945 Comm: cat Not tainted 6.0.0-next-20221007-dirty #349
RIP: 0010:ext4_es_end.isra.0+0x34/0x42
RSP: 0018:ffffc9000143b768 EFLAGS: 00010203
RAX: 0000000000000000 RBX: ffff8881769cd0b8 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff8fc27cf7 RDI: 00000000ffffffff
RBP: ffff8881769cd0bc R08: 0000000000000000 R09: ffffc9000143b5f8
R10: 0000000000000001 R11: 0000000000000001 R12: ffff8881769cd0a0
R13: ffff8881768e5668 R14: 00000000768e52f0 R15: 0000000000000000
FS: 00007f359f7f05c0(0000)GS:ffff88842fd00000(0000)knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f359f5a2000 CR3: 000000017130c000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
__es_tree_search.isra.0+0x6d/0xf5
ext4_es_cache_extent+0xfa/0x230
ext4_cache_extents+0xd2/0x110
ext4_find_extent+0x5d5/0x8c0
ext4_ext_map_blocks+0x9c/0x1d30
ext4_map_blocks+0x431/0xa50
ext4_mpage_readpages+0x48e/0xe40
ext4_readahead+0x47/0x50
read_pages+0x82/0x530
page_cache_ra_unbounded+0x199/0x2a0
do_page_cache_ra+0x47/0x70
page_cache_ra_order+0x242/0x400
ondemand_readahead+0x1e8/0x4b0
page_cache_sync_ra+0xf4/0x110
filemap_get_pages+0x131/0xb20
filemap_read+0xda/0x4b0
generic_file_read_iter+0x13a/0x250
ext4_file_read_iter+0x59/0x1d0
vfs_read+0x28f/0x460
ksys_read+0x73/0x160
__x64_sys_read+0x1e/0x30
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
</TASK>
==================================================================
In the above issue, ioctl invokes the swap_inode_boot_loader function to
swap inode<5> and inode<12>. However, inode<5> contain incorrect imode and
disordered extents, and i_nlink is set to 1. The extents check for inode in
the ext4_iget function can be bypassed bacause 5 is EXT4_BOOT_LOADER_INO.
While links_count is set to 1, the extents are not initialized in
swap_inode_boot_loader. After the ioctl command is executed successfully,
the extents are swapped to inode<12>, in this case, run the `cat` command
to view inode<12>. And Bug_ON is triggered due to the incorrect extents.
When the boot loader inode is not initialized, its imode can be one of the
following:
1) the imode is a bad type, which is marked as bad_inode in ext4_iget and
set to S_IFREG.
2) the imode is good type but not S_IFREG.
3) the imode is S_IFREG.
The BUG_ON may be triggered by bypassing the check in cases 1 and 2.
Therefore, when the boot loader inode is bad_inode or its imode is not
S_IFREG, initialize the inode to avoid triggering the BUG.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221026042310.3839669-5-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1da18e38cb97e9521e93d63034521a9649524f64 upstream.
When bigalloc is enabled, reserved cluster accounting for delayed
allocation is handled in extent_status.c. With a corrupted file
system, it's possible for this accounting to be incorrect,
dsicovered by Syzbot:
EXT4-fs error (device loop0): ext4_validate_block_bitmap:398: comm rep:
bg 0: block 5: invalid block bitmap
EXT4-fs (loop0): Delayed block allocation failed for inode 18 at logical
offset 0 with max blocks 32 with error 28
EXT4-fs (loop0): This should not happen!! Data will be lost
EXT4-fs (loop0): Total free blocks count 0
EXT4-fs (loop0): Free/Dirty block details
EXT4-fs (loop0): free_blocks=0
EXT4-fs (loop0): dirty_blocks=32
EXT4-fs (loop0): Block reservation details
EXT4-fs (loop0): i_reserved_data_blocks=2
EXT4-fs (loop0): Inode 18 (00000000845cd634):
i_reserved_data_blocks (1) not cleared!
Above issue happens as follows:
Assume:
sbi->s_cluster_ratio = 16
Step1:
Insert delay block [0, 31] -> ei->i_reserved_data_blocks=2
Step2:
ext4_writepages
mpage_map_and_submit_extent -> return failed
mpage_release_unused_pages -> to release [0, 30]
ext4_es_remove_extent -> remove lblk=0 end=30
__es_remove_extent -> len1=0 len2=31-30=1
__es_remove_extent:
...
if (len2 > 0) {
...
if (len1 > 0) {
...
} else {
es->es_lblk = end + 1;
es->es_len = len2;
...
}
if (count_reserved)
count_rsvd(inode, lblk, ...);
goto out; -> will return but didn't calculate 'reserved'
...
Step3:
ext4_destroy_inode -> trigger "i_reserved_data_blocks (1) not cleared!"
To solve above issue if 'len2>0' call 'get_rsvd()' before goto out.
Reported-by: syzbot+05a0f0ccab4a25626e38@syzkaller.appspotmail.com
Fixes: 8fcc3a580651 ("ext4: rework reserved cluster accounting when invalidating pages")
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Eric Whitney <enwlinux@gmail.com>
Link: https://lore.kernel.org/r/20221208033426.1832460-2-yebin@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 07342ec259df2a35d6a34aebce010567a80a0e15 upstream.
Before quota is enabled, a check on the preset quota inums in
ext4_super_block is added to prevent wrong quota inodes from being loaded.
In addition, when the quota fails to be enabled, the quota type and quota
inum are printed to facilitate fault locating.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221026042310.3839669-3-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 63b1e9bccb71fe7d7e3ddc9877dbdc85e5d2d023 upstream.
There are many places that will get unhappy (and crash) when ext4_iget()
returns a bad inode. However, if iget the boot loader inode, allows a bad
inode to be returned, because the inode may not be initialized. This
mechanism can be used to bypass some checks and cause panic. To solve this
problem, we add a special iget flag EXT4_IGET_BAD. Only with this flag
we'd be returning bad inode from ext4_iget(), otherwise we always return
the error code if the inode is bad inode.(suggested by Jan Kara)
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221026042310.3839669-4-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3bf678a0f9c017c9ba7c581541dbc8453452a7ae upstream.
Shifting signed 32-bit value by 31 bits is undefined, so changing
significant bit to unsigned. The UBSAN warning calltrace like below:
UBSAN: shift-out-of-bounds in fs/ext4/ext4.h:591:2
left shift of 1 by 31 places cannot be represented in type 'int'
Call Trace:
<TASK>
dump_stack_lvl+0x7d/0xa5
dump_stack+0x15/0x1b
ubsan_epilogue+0xe/0x4e
__ubsan_handle_shift_out_of_bounds+0x1e7/0x20c
ext4_init_fs+0x5a/0x277
do_one_initcall+0x76/0x430
kernel_init_freeable+0x3b3/0x422
kernel_init+0x24/0x1e0
ret_from_fork+0x1f/0x30
</TASK>
Fixes: 9a4c80194713 ("ext4: ensure Inode flags consistency are checked at build time")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Link: https://lore.kernel.org/r/20221031055833.3966222-1-cuigaosheng1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
infinite loop
commit eee22187b53611e173161e38f61de1c7ecbeb876 upstream.
In do_writepages, if the value returned by ext4_writepages is "-ENOMEM"
and "wbc->sync_mode == WB_SYNC_ALL", retry until the condition is not met.
In __ext4_get_inode_loc, if the bh returned by sb_getblk is NULL,
the function returns -ENOMEM.
In __getblk_slow, if the return value of grow_buffers is less than 0,
the function returns NULL.
When the three processes are connected in series like the following stack,
an infinite loop may occur:
do_writepages <--- keep retrying
ext4_writepages
mpage_map_and_submit_extent
mpage_map_one_extent
ext4_map_blocks
ext4_ext_map_blocks
ext4_ext_handle_unwritten_extents
ext4_ext_convert_to_initialized
ext4_split_extent
ext4_split_extent_at
__ext4_ext_dirty
__ext4_mark_inode_dirty
ext4_reserve_inode_write
ext4_get_inode_loc
__ext4_get_inode_loc <--- return -ENOMEM
sb_getblk
__getblk_gfp
__getblk_slow <--- return NULL
grow_buffers
grow_dev_page <--- return -ENXIO
ret = (block < end_block) ? 1 : -ENXIO;
In this issue, bg_inode_table_hi is overwritten as an incorrect value.
As a result, `block < end_block` cannot be met in grow_dev_page.
Therefore, __ext4_get_inode_loc always returns '-ENOMEM' and do_writepages
keeps retrying. As a result, the writeback process is in the D state due
to an infinite loop.
Add a check on inode table block in the __ext4_get_inode_loc function by
referring to ext4_read_inode_bitmap to avoid this infinite loop.
Cc: stable@kernel.org
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220817132701.3015912-3-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2bfd81043e944af0e52835ef6d9b41795af22341 upstream.
Three mount options: "tcpnodelay" and "noautotune" and "noblocksend"
were not displayed when passed in on cifs/smb3 mounts (e.g. displayed
in /proc/mounts e.g.). No change to defaults so these are not
displayed if not specified on mount.
Cc: stable@vger.kernel.org
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a85ceafd41927e41a4103d228a993df7edd8823b upstream.
Since rc was initialised to -ENOMEM in cifs_get_smb_ses(), when an
existing smb session was found, free_xid() would be called and then
print
CIFS: fs/cifs/connect.c: Existing tcp session with server found
CIFS: fs/cifs/connect.c: VFS: in cifs_get_smb_ses as Xid: 44 with uid: 0
CIFS: fs/cifs/connect.c: Existing smb sess found (status=1)
CIFS: fs/cifs/connect.c: VFS: leaving cifs_get_smb_ses (xid = 44) rc = -12
Fix this by initialising rc to 0 and then let free_xid() print this
instead
CIFS: fs/cifs/connect.c: Existing tcp session with server found
CIFS: fs/cifs/connect.c: VFS: in cifs_get_smb_ses as Xid: 14 with uid: 0
CIFS: fs/cifs/connect.c: Existing smb sess found (status=1)
CIFS: fs/cifs/connect.c: VFS: leaving cifs_get_smb_ses (xid = 14) rc = 0
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit e7f703ff2507f4e9f496da96cd4b78fd3026120c ]
Fix to return a negative error code from create_elf_fdpic_tables()
instead of 0.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/1669945261-30271-1-git-send-email-wangyufen@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e7f7785449a1f459a4a3ca92f82f56fb054dd2b9 ]
In 2016 Linus moved install_exec_creds immediately after
setup_new_exec, in binfmt_elf as a cleanup and as part of closing a
potential information leak.
Perform the same cleanup for the other binary formats.
Different binary formats doing the same things the same way makes exec
easier to reason about and easier to maintain.
Greg Ungerer reports:
> I tested the the whole series on non-MMU m68k and non-MMU arm
> (exercising binfmt_flat) and it all tested out with no problems,
> so for the binfmt_flat changes:
Tested-by: Greg Ungerer <gerg@linux-m68k.org>
Ref: 9f834ec18def ("binfmt_elf: switch to new creds when switching to new mm")
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Greg Ungerer <gerg@linux-m68k.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Stable-dep-of: e7f703ff2507 ("binfmt: Fix error return code in load_elf_fdpic_binary()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 560840afc3e63bbe5d9c5ef6b2ecf8f3589adff6 upstream.
If a file consists of an inline extent followed by a regular or prealloc
extent, then a legitimate attempt to resolve a logical address in the
non-inline region will result in add_all_parents reading the invalid
offset field of the inline extent. If the inline extent item is placed
in the leaf eb s.t. it is the first item, attempting to access the
offset field will not only be meaningless, it will go past the end of
the eb and cause this panic:
[17.626048] BTRFS warning (device dm-2): bad eb member end: ptr 0x3fd4 start 30834688 member offset 16377 size 8
[17.631693] general protection fault, probably for non-canonical address 0x5088000000000: 0000 [#1] SMP PTI
[17.635041] CPU: 2 PID: 1267 Comm: btrfs Not tainted 5.12.0-07246-g75175d5adc74-dirty #199
[17.637969] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[17.641995] RIP: 0010:btrfs_get_64+0xe7/0x110
[17.649890] RSP: 0018:ffffc90001f73a08 EFLAGS: 00010202
[17.651652] RAX: 0000000000000001 RBX: ffff88810c42d000 RCX: 0000000000000000
[17.653921] RDX: 0005088000000000 RSI: ffffc90001f73a0f RDI: 0000000000000001
[17.656174] RBP: 0000000000000ff9 R08: 0000000000000007 R09: c0000000fffeffff
[17.658441] R10: ffffc90001f73790 R11: ffffc90001f73788 R12: ffff888106afe918
[17.661070] R13: 0000000000003fd4 R14: 0000000000003f6f R15: cdcdcdcdcdcdcdcd
[17.663617] FS: 00007f64e7627d80(0000) GS:ffff888237c80000(0000) knlGS:0000000000000000
[17.666525] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[17.668664] CR2: 000055d4a39152e8 CR3: 000000010c596002 CR4: 0000000000770ee0
[17.671253] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[17.673634] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[17.676034] PKRU: 55555554
[17.677004] Call Trace:
[17.677877] add_all_parents+0x276/0x480
[17.679325] find_parent_nodes+0xfae/0x1590
[17.680771] btrfs_find_all_leafs+0x5e/0xa0
[17.682217] iterate_extent_inodes+0xce/0x260
[17.683809] ? btrfs_inode_flags_to_xflags+0x50/0x50
[17.685597] ? iterate_inodes_from_logical+0xa1/0xd0
[17.687404] iterate_inodes_from_logical+0xa1/0xd0
[17.689121] ? btrfs_inode_flags_to_xflags+0x50/0x50
[17.691010] btrfs_ioctl_logical_to_ino+0x131/0x190
[17.692946] btrfs_ioctl+0x104a/0x2f60
[17.694384] ? selinux_file_ioctl+0x182/0x220
[17.695995] ? __x64_sys_ioctl+0x84/0xc0
[17.697394] __x64_sys_ioctl+0x84/0xc0
[17.698697] do_syscall_64+0x33/0x40
[17.700017] entry_SYSCALL_64_after_hwframe+0x44/0xae
[17.701753] RIP: 0033:0x7f64e72761b7
[17.709355] RSP: 002b:00007ffefb067f58 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[17.712088] RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f64e72761b7
[17.714667] RDX: 00007ffefb067fb0 RSI: 00000000c0389424 RDI: 0000000000000003
[17.717386] RBP: 00007ffefb06d188 R08: 000055d4a390d2b0 R09: 00007f64e7340a60
[17.719938] R10: 0000000000000231 R11: 0000000000000246 R12: 0000000000000001
[17.722383] R13: 0000000000000000 R14: 00000000c0389424 R15: 000055d4a38fd2a0
[17.724839] Modules linked in:
Fix the bug by detecting the inline extent item in add_all_parents and
skipping to the next extent item.
CC: stable@vger.kernel.org # 4.9+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c3db3c2fd9992c08f49aa93752d3c103c3a4f6aa upstream.
The commit introduces another bug.
Cc: stable@vger.kernel.org
Fixes: c6ad7fd16657e ("f2fs: fix to do sanity check on summary info")
Signed-off-by: Pavel Machek <pavel@denx.de>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 11933cf1d91d57da9e5c53822a540bbdc2656c16 upstream.
The propagate_mnt() function handles mount propagation when creating
mounts and propagates the source mount tree @source_mnt to all
applicable nodes of the destination propagation mount tree headed by
@dest_mnt.
Unfortunately it contains a bug where it fails to terminate at peers of
@source_mnt when looking up copies of the source mount that become
masters for copies of the source mount tree mounted on top of slaves in
the destination propagation tree causing a NULL dereference.
Once the mechanics of the bug are understood it's easy to trigger.
Because of unprivileged user namespaces it is available to unprivileged
users.
While fixing this bug we've gotten confused multiple times due to
unclear terminology or missing concepts. So let's start this with some
clarifications:
* The terms "master" or "peer" denote a shared mount. A shared mount
belongs to a peer group.
* A peer group is a set of shared mounts that propagate to each other.
They are identified by a peer group id. The peer group id is available
in @shared_mnt->mnt_group_id.
Shared mounts within the same peer group have the same peer group id.
The peers in a peer group can be reached via @shared_mnt->mnt_share.
* The terms "slave mount" or "dependent mount" denote a mount that
receives propagation from a peer in a peer group. IOW, shared mounts
may have slave mounts and slave mounts have shared mounts as their
master. Slave mounts of a given peer in a peer group are listed on
that peers slave list available at @shared_mnt->mnt_slave_list.
* The term "master mount" denotes a mount in a peer group. IOW, it
denotes a shared mount or a peer mount in a peer group. The term
"master mount" - or "master" for short - is mostly used when talking
in the context of slave mounts that receive propagation from a master
mount. A master mount of a slave identifies the closest peer group a
slave mount receives propagation from. The master mount of a slave can
be identified via @slave_mount->mnt_master. Different slaves may point
to different masters in the same peer group.
* Multiple peers in a peer group can have non-empty ->mnt_slave_lists.
Non-empty ->mnt_slave_lists of peers don't intersect. Consequently, to
ensure all slave mounts of a peer group are visited the
->mnt_slave_lists of all peers in a peer group have to be walked.
* Slave mounts point to a peer in the closest peer group they receive
propagation from via @slave_mnt->mnt_master (see above). Together with
these peers they form a propagation group (see below). The closest
peer group can thus be identified through the peer group id
@slave_mnt->mnt_master->mnt_group_id of the peer/master that a slave
mount receives propagation from.
* A shared-slave mount is a slave mount to a peer group pg1 while also
a peer in another peer group pg2. IOW, a peer group may receive
propagation from another peer group.
If a peer group pg1 is a slave to another peer group pg2 then all
peers in peer group pg1 point to the same peer in peer group pg2 via
->mnt_master. IOW, all peers in peer group pg1 appear on the same
->mnt_slave_list. IOW, they cannot be slaves to different peer groups.
* A pure slave mount is a slave mount that is a slave to a peer group
but is not a peer in another peer group.
* A propagation group denotes the set of mounts consisting of a single
peer group pg1 and all slave mounts and shared-slave mounts that point
to a peer in that peer group via ->mnt_master. IOW, all slave mounts
such that @slave_mnt->mnt_master->mnt_group_id is equal to
@shared_mnt->mnt_group_id.
The concept of a propagation group makes it easier to talk about a
single propagation level in a propagation tree.
For example, in propagate_mnt() the immediate peers of @dest_mnt and
all slaves of @dest_mnt's peer group form a propagation group propg1.
So a shared-slave mount that is a slave in propg1 and that is a peer
in another peer group pg2 forms another propagation group propg2
together with all slaves that point to that shared-slave mount in
their ->mnt_master.
* A propagation tree refers to all mounts that receive propagation
starting from a specific shared mount.
For example, for propagate_mnt() @dest_mnt is the start of a
propagation tree. The propagation tree ecompasses all mounts that
receive propagation from @dest_mnt's peer group down to the leafs.
With that out of the way let's get to the actual algorithm.
We know that @dest_mnt is guaranteed to be a pure shared mount or a
shared-slave mount. This is guaranteed by a check in
attach_recursive_mnt(). So propagate_mnt() will first propagate the
source mount tree to all peers in @dest_mnt's peer group:
for (n = next_peer(dest_mnt); n != dest_mnt; n = next_peer(n)) {
ret = propagate_one(n);
if (ret)
goto out;
}
Notice, that the peer propagation loop of propagate_mnt() doesn't
propagate @dest_mnt itself. @dest_mnt is mounted directly in
attach_recursive_mnt() after we propagated to the destination
propagation tree.
The mount that will be mounted on top of @dest_mnt is @source_mnt. This
copy was created earlier even before we entered attach_recursive_mnt()
and doesn't concern us a lot here.
It's just important to notice that when propagate_mnt() is called
@source_mnt will not yet have been mounted on top of @dest_mnt. Thus,
@source_mnt->mnt_parent will either still point to @source_mnt or - in
the case @source_mnt is moved and thus already attached - still to its
former parent.
For each peer @m in @dest_mnt's peer group propagate_one() will create a
new copy of the source mount tree and mount that copy @child on @m such
that @child->mnt_parent points to @m after propagate_one() returns.
propagate_one() will stash the last destination propagation node @m in
@last_dest and the last copy it created for the source mount tree in
@last_source.
Hence, if we call into propagate_one() again for the next destination
propagation node @m, @last_dest will point to the previous destination
propagation node and @last_source will point to the previous copy of the
source mount tree and mounted on @last_dest.
Each new copy of the source mount tree is created from the previous copy
of the source mount tree. This will become important later.
The peer loop in propagate_mnt() is straightforward. We iterate through
the peers copying and updating @last_source and @last_dest as we go
through them and mount each copy of the source mount tree @child on a
peer @m in @dest_mnt's peer group.
After propagate_mnt() handled the peers in @dest_mnt's peer group
propagate_mnt() will propagate the source mount tree down the
propagation tree that @dest_mnt's peer group propagates to:
for (m = next_group(dest_mnt, dest_mnt); m;
m = next_group(m, dest_mnt)) {
/* everything in that slave group */
n = m;
do {
ret = propagate_one(n);
if (ret)
goto out;
n = next_peer(n);
} while (n != m);
}
The next_group() helper will recursively walk the destination
propagation tree, descending into each propagation group of the
propagation tree.
The important part is that it takes care to propagate the source mount
tree to all peers in the peer group of a propagation group before it
propagates to the slaves to those peers in the propagation group. IOW,
it creates and mounts copies of the source mount tree that become
masters before it creates and mounts copies of the source mount tree
that become slaves to these masters.
It is important to remember that propagating the source mount tree to
each mount @m in the destination propagation tree simply means that we
create and mount new copies @child of the source mount tree on @m such
that @child->mnt_parent points to @m.
Since we know that each node @m in the destination propagation tree
headed by @dest_mnt's peer group will be overmounted with a copy of the
source mount tree and since we know that the propagation properties of
each copy of the source mount tree we create and mount at @m will mostly
mirror the propagation properties of @m. We can use that information to
create and mount the copies of the source mount tree that become masters
before their slaves.
The easy case is always when @m and @last_dest are peers in a peer group
of a given propagation group. In that case we know that we can simply
copy @last_source without having to figure out what the master for the
new copy @child of the source mount tree needs to be as we've done that
in a previous call to propagate_one().
The hard case is when we're dealing with a slave mount or a shared-slave
mount @m in a destination propagation group that we need to create and
mount a copy of the source mount tree on.
For each propagation group in the destination propagation tree we
propagate the source mount tree to we want to make sure that the copies
@child of the source mount tree we create and mount on slaves @m pick an
ealier copy of the source mount tree that we mounted on a master @m of
the destination propagation group as their master. This is a mouthful
but as far as we can tell that's the core of it all.
But, if we keep track of the masters in the destination propagation tree
@m we can use the information to find the correct master for each copy
of the source mount tree we create and mount at the slaves in the
destination propagation tree @m.
Let's walk through the base case as that's still fairly easy to grasp.
If we're dealing with the first slave in the propagation group that
@dest_mnt is in then we don't yet have marked any masters in the
destination propagation tree.
We know the master for the first slave to @dest_mnt's peer group is
simple @dest_mnt. So we expect this algorithm to yield a copy of the
source mount tree that was mounted on a peer in @dest_mnt's peer group
as the master for the copy of the source mount tree we want to mount at
the first slave @m:
for (n = m; ; n = p) {
p = n->mnt_master;
if (p == dest_master || IS_MNT_MARKED(p))
break;
}
For the first slave we walk the destination propagation tree all the way
up to a peer in @dest_mnt's peer group. IOW, the propagation hierarchy
can be walked by walking up the @mnt->mnt_master hierarchy of the
destination propagation tree @m. We will ultimately find a peer in
@dest_mnt's peer group and thus ultimately @dest_mnt->mnt_master.
Btw, here the assumption we listed at the beginning becomes important.
Namely, that peers in a peer group pg1 that are slaves in another peer
group pg2 appear on the same ->mnt_slave_list. IOW, all slaves who are
peers in peer group pg1 point to the same peer in peer group pg2 via
their ->mnt_master. Otherwise the termination condition in the code
above would be wrong and next_group() would be broken too.
So the first iteration sets:
n = m;
p = n->mnt_master;
such that @p now points to a peer or @dest_mnt itself. We walk up one
more level since we don't have any marked mounts. So we end up with:
n = dest_mnt;
p = dest_mnt->mnt_master;
If @dest_mnt's peer group is not slave to another peer group then @p is
now NULL. If @dest_mnt's peer group is a slave to another peer group
then @p now points to @dest_mnt->mnt_master points which is a master
outside the propagation tree we're dealing with.
Now we need to figure out the master for the copy of the source mount
tree we're about to create and mount on the first slave of @dest_mnt's
peer group:
do {
struct mount *parent = last_source->mnt_parent;
if (last_source == first_source)
break;
done = parent->mnt_master == p;
if (done && peers(n, parent))
break;
last_source = last_source->mnt_master;
} while (!done);
We know that @last_source->mnt_parent points to @last_dest and
@last_dest is the last peer in @dest_mnt's peer group we propagated to
in the peer loop in propagate_mnt().
Consequently, @last_source is the last copy we created and mount on that
last peer in @dest_mnt's peer group. So @last_source is the master we
want to pick.
We know that @last_source->mnt_parent->mnt_master points to
@last_dest->mnt_master. We also know that @last_dest->mnt_master is
either NULL or points to a master outside of the destination propagation
tree and so does @p. Hence:
done = parent->mnt_master == p;
is trivially true in the base condition.
We also know that for the first slave mount of @dest_mnt's peer group
that @last_dest either points @dest_mnt itself because it was
initialized to:
last_dest = dest_mnt;
at the beginning of propagate_mnt() or it will point to a peer of
@dest_mnt in its peer group. In both cases it is guaranteed that on the
first iteration @n and @parent are peers (Please note the check for
peers here as that's important.):
if (done && peers(n, parent))
break;
So, as we expected, we select @last_source, which referes to the last
copy of the source mount tree we mounted on the last peer in @dest_mnt's
peer group, as the master of the first slave in @dest_mnt's peer group.
The rest is taken care of by clone_mnt(last_source, ...). We'll skip
over that part otherwise this becomes a blogpost.
At the end of propagate_mnt() we now mark @m->mnt_master as the first
master in the destination propagation tree that is distinct from
@dest_mnt->mnt_master. IOW, we mark @dest_mnt itself as a master.
By marking @dest_mnt or one of it's peers we are able to easily find it
again when we later lookup masters for other copies of the source mount
tree we mount copies of the source mount tree on slaves @m to
@dest_mnt's peer group. This, in turn allows us to find the master we
selected for the copies of the source mount tree we mounted on master in
the destination propagation tree again.
The important part is to realize that the code makes use of the fact
that the last copy of the source mount tree stashed in @last_source was
mounted on top of the previous destination propagation node @last_dest.
What this means is that @last_source allows us to walk the destination
propagation hierarchy the same way each destination propagation node @m
does.
If we take @last_source, which is the copy of @source_mnt we have
mounted on @last_dest in the previous iteration of propagate_one(), then
we know @last_source->mnt_parent points to @last_dest but we also know
that as we walk through the destination propagation tree that
@last_source->mnt_master will point to an earlier copy of the source
mount tree we mounted one an earlier destination propagation node @m.
IOW, @last_source->mnt_parent will be our hook into the destination
propagation tree and each consecutive @last_source->mnt_master will lead
us to an earlier propagation node @m via
@last_source->mnt_master->mnt_parent.
Hence, by walking up @last_source->mnt_master, each of which is mounted
on a node that is a master @m in the destination propagation tree we can
also walk up the destination propagation hierarchy.
So, for each new destination propagation node @m we use the previous
copy of @last_source and the fact it's mounted on the previous
propagation node @last_dest via @last_source->mnt_master->mnt_parent to
determine what the master of the new copy of @last_source needs to be.
The goal is to find the _closest_ master that the new copy of the source
mount tree we are about to create and mount on a slave @m in the
destination propagation tree needs to pick. IOW, we want to find a
suitable master in the propagation group.
As the propagation structure of the source mount propagation tree we
create mirrors the propagation structure of the destination propagation
tree we can find @m's closest master - i.e., a marked master - which is
a peer in the closest peer group that @m receives propagation from. We
store that closest master of @m in @p as before and record the slave to
that master in @n
We then search for this master @p via @last_source by walking up the
master hierarchy starting from the last copy of the source mount tree
stored in @last_source that we created and mounted on the previous
destination propagation node @m.
We will try to find the master by walking @last_source->mnt_master and
by comparing @last_source->mnt_master->mnt_parent->mnt_master to @p. If
we find @p then we can figure out what earlier copy of the source mount
tree needs to be the master for the new copy of the source mount tree
we're about to create and mount at the current destination propagation
node @m.
If @last_source->mnt_master->mnt_parent and @n are peers then we know
that the closest master they receive propagation from is
@last_source->mnt_master->mnt_parent->mnt_master. If not then the
closest immediate peer group that they receive propagation from must be
one level higher up.
This builds on the earlier clarification at the beginning that all peers
in a peer group which are slaves of other peer groups all point to the
same ->mnt_master, i.e., appear on the same ->mnt_slave_list, of the
closest peer group that they receive propagation from.
However, terminating the walk has corner cases.
If the closest marked master for a given destination node @m cannot be
found by walking up the master hierarchy via @last_source->mnt_master
then we need to terminate the walk when we encounter @source_mnt again.
This isn't an arbitrary termination. It simply means that the new copy
of the source mount tree we're about to create has a copy of the source
mount tree we created and mounted on a peer in @dest_mnt's peer group as
its master. IOW, @source_mnt is the peer in the closest peer group that
the new copy of the source mount tree receives propagation from.
We absolutely have to stop @source_mnt because @last_source->mnt_master
either points outside the propagation hierarchy we're dealing with or it
is NULL because @source_mnt isn't a shared-slave.
So continuing the walk past @source_mnt would cause a NULL dereference
via @last_source->mnt_master->mnt_parent. And so we have to stop the
walk when we encounter @source_mnt again.
One scenario where this can happen is when we first handled a series of
slaves of @dest_mnt's peer group and then encounter peers in a new peer
group that is a slave to @dest_mnt's peer group. We handle them and then
we encounter another slave mount to @dest_mnt that is a pure slave to
@dest_mnt's peer group. That pure slave will have a peer in @dest_mnt's
peer group as its master. Consequently, the new copy of the source mount
tree will need to have @source_mnt as it's master. So we walk the
propagation hierarchy all the way up to @source_mnt based on
@last_source->mnt_master.
So terminate on @source_mnt, easy peasy. Except, that the check misses
something that the rest of the algorithm already handles.
If @dest_mnt has peers in it's peer group the peer loop in
propagate_mnt():
for (n = next_peer(dest_mnt); n != dest_mnt; n = next_peer(n)) {
ret = propagate_one(n);
if (ret)
goto out;
}
will consecutively update @last_source with each previous copy of the
source mount tree we created and mounted at the previous peer in
@dest_mnt's peer group. So after that loop terminates @last_source will
point to whatever copy of the source mount tree was created and mounted
on the last peer in @dest_mnt's peer group.
Furthermore, if there is even a single additional peer in @dest_mnt's
peer group then @last_source will __not__ point to @source_mnt anymore.
Because, as we mentioned above, @dest_mnt isn't even handled in this
loop but directly in attach_recursive_mnt(). So it can't even accidently
come last in that peer loop.
So the first time we handle a slave mount @m of @dest_mnt's peer group
the copy of the source mount tree we create will make the __last copy of
the source mount tree we created and mounted on the last peer in
@dest_mnt's peer group the master of the new copy of the source mount
tree we create and mount on the first slave of @dest_mnt's peer group__.
But this means that the termination condition that checks for
@source_mnt is wrong. The @source_mnt cannot be found anymore by
propagate_one(). Instead it will find the last copy of the source mount
tree we created and mounted for the last peer of @dest_mnt's peer group
again. And that is a peer of @source_mnt not @source_mnt itself.
IOW, we fail to terminate the loop correctly and ultimately dereference
@last_source->mnt_master->mnt_parent. When @source_mnt's peer group
isn't slave to another peer group then @last_source->mnt_master is NULL
causing the splat below.
For example, assume @dest_mnt is a pure shared mount and has three peers
in its peer group:
===================================================================================
mount-id mount-parent-id peer-group-id
===================================================================================
(@dest_mnt) mnt_master[216] 309 297 shared:216
\
(@source_mnt) mnt_master[218]: 609 609 shared:218
(1) mnt_master[216]: 607 605 shared:216
\
(P1) mnt_master[218]: 624 607 shared:218
(2) mnt_master[216]: 576 574 shared:216
\
(P2) mnt_master[218]: 625 576 shared:218
(3) mnt_master[216]: 545 543 shared:216
\
(P3) mnt_master[218]: 626 545 shared:218
After this sequence has been processed @last_source will point to (P3),
the copy generated for the third peer in @dest_mnt's peer group we
handled. So the copy of the source mount tree (P4) we create and mount
on the first slave of @dest_mnt's peer group:
===================================================================================
mount-id mount-parent-id peer-group-id
===================================================================================
mnt_master[216] 309 297 shared:216
/
/
(S0) mnt_slave 483 481 master:216
\
\ (P3) mnt_master[218] 626 545 shared:218
\ /
\/
(P4) mnt_slave 627 483 master:218
will pick the last copy of the source mount tree (P3) as master, not (S0).
When walking the propagation hierarchy via @last_source's master
hierarchy we encounter (P3) but not (S0), i.e., @source_mnt.
We can fix this in multiple ways:
(1) By setting @last_source to @source_mnt after we processed the peers
in @dest_mnt's peer group right after the peer loop in
propagate_mnt().
(2) By changing the termination condition that relies on finding exactly
@source_mnt to finding a peer of @source_mnt.
(3) By only moving @last_source when we actually venture into a new peer
group or some clever variant thereof.
The first two options are minimally invasive and what we want as a fix.
The third option is more intrusive but something we'd like to explore in
the near future.
This passes all LTP tests and specifically the mount propagation
testsuite part of it. It also holds up against all known reproducers of
this issues.
Final words.
First, this is a clever but __worringly__ underdocumented algorithm.
There isn't a single detailed comment to be found in next_group(),
propagate_one() or anywhere else in that file for that matter. This has
been a giant pain to understand and work through and a bug like this is
insanely difficult to fix without a detailed understanding of what's
happening. Let's not talk about the amount of time that was sunk into
fixing this.
Second, all the cool kids with access to
unshare --mount --user --map-root --propagation=unchanged
are going to have a lot of fun. IOW, triggerable by unprivileged users
while namespace_lock() lock is held.
[ 115.848393] BUG: kernel NULL pointer dereference, address: 0000000000000010
[ 115.848967] #PF: supervisor read access in kernel mode
[ 115.849386] #PF: error_code(0x0000) - not-present page
[ 115.849803] PGD 0 P4D 0
[ 115.850012] Oops: 0000 [#1] PREEMPT SMP PTI
[ 115.850354] CPU: 0 PID: 15591 Comm: mount Not tainted 6.1.0-rc7 #3
[ 115.850851] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS
VirtualBox 12/01/2006
[ 115.851510] RIP: 0010:propagate_one.part.0+0x7f/0x1a0
[ 115.851924] Code: 75 eb 4c 8b 05 c2 25 37 02 4c 89 ca 48 8b 4a 10
49 39 d0 74 1e 48 3b 81 e0 00 00 00 74 26 48 8b 92 e0 00 00 00 be 01
00 00 00 <48> 8b 4a 10 49 39 d0 75 e2 40 84 f6 74 38 4c 89 05 84 25 37
02 4d
[ 115.853441] RSP: 0018:ffffb8d5443d7d50 EFLAGS: 00010282
[ 115.853865] RAX: ffff8e4d87c41c80 RBX: ffff8e4d88ded780 RCX: ffff8e4da4333a00
[ 115.854458] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8e4d88ded780
[ 115.855044] RBP: ffff8e4d88ded780 R08: ffff8e4da4338000 R09: ffff8e4da43388c0
[ 115.855693] R10: 0000000000000002 R11: ffffb8d540158000 R12: ffffb8d5443d7da8
[ 115.856304] R13: ffff8e4d88ded780 R14: 0000000000000000 R15: 0000000000000000
[ 115.856859] FS: 00007f92c90c9800(0000) GS:ffff8e4dfdc00000(0000)
knlGS:0000000000000000
[ 115.857531] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 115.858006] CR2: 0000000000000010 CR3: 0000000022f4c002 CR4: 00000000000706f0
[ 115.858598] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 115.859393] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 115.860099] Call Trace:
[ 115.860358] <TASK>
[ 115.860535] propagate_mnt+0x14d/0x190
[ 115.860848] attach_recursive_mnt+0x274/0x3e0
[ 115.861212] path_mount+0x8c8/0xa60
[ 115.861503] __x64_sys_mount+0xf6/0x140
[ 115.861819] do_syscall_64+0x5b/0x80
[ 115.862117] ? do_faccessat+0x123/0x250
[ 115.862435] ? syscall_exit_to_user_mode+0x17/0x40
[ 115.862826] ? do_syscall_64+0x67/0x80
[ 115.863133] ? syscall_exit_to_user_mode+0x17/0x40
[ 115.863527] ? do_syscall_64+0x67/0x80
[ 115.863835] ? do_syscall_64+0x67/0x80
[ 115.864144] ? do_syscall_64+0x67/0x80
[ 115.864452] ? exc_page_fault+0x70/0x170
[ 115.864775] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 115.865187] RIP: 0033:0x7f92c92b0ebe
[ 115.865480] Code: 48 8b 0d 75 4f 0c 00 f7 d8 64 89 01 48 83 c8 ff
c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 49 89 ca b8 a5 00 00
00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 42 4f 0c 00 f7 d8 64 89
01 48
[ 115.866984] RSP: 002b:00007fff000aa728 EFLAGS: 00000246 ORIG_RAX:
00000000000000a5
[ 115.867607] RAX: ffffffffffffffda RBX: 000055a77888d6b0 RCX: 00007f92c92b0ebe
[ 115.868240] RDX: 000055a77888d8e0 RSI: 000055a77888e6e0 RDI: 000055a77888e620
[ 115.868823] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000001
[ 115.869403] R10: 0000000000001000 R11: 0000000000000246 R12: 000055a77888e620
[ 115.869994] R13: 000055a77888d8e0 R14: 00000000ffffffff R15: 00007f92c93e4076
[ 115.870581] </TASK>
[ 115.870763] Modules linked in: nft_fib_inet nft_fib_ipv4
nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6
nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6
nf_defrag_ipv4 ip_set rfkill nf_tables nfnetlink qrtr snd_intel8x0
sunrpc snd_ac97_codec ac97_bus snd_pcm snd_timer intel_rapl_msr
intel_rapl_common snd vboxguest intel_powerclamp video rapl joydev
soundcore i2c_piix4 wmi fuse zram xfs vmwgfx crct10dif_pclmul
crc32_pclmul crc32c_intel polyval_clmulni polyval_generic
drm_ttm_helper ttm e1000 ghash_clmulni_intel serio_raw ata_generic
pata_acpi scsi_dh_rdac scsi_dh_emc scsi_dh_alua dm_multipath
[ 115.875288] CR2: 0000000000000010
[ 115.875641] ---[ end trace 0000000000000000 ]---
[ 115.876135] RIP: 0010:propagate_one.part.0+0x7f/0x1a0
[ 115.876551] Code: 75 eb 4c 8b 05 c2 25 37 02 4c 89 ca 48 8b 4a 10
49 39 d0 74 1e 48 3b 81 e0 00 00 00 74 26 48 8b 92 e0 00 00 00 be 01
00 00 00 <48> 8b 4a 10 49 39 d0 75 e2 40 84 f6 74 38 4c 89 05 84 25 37
02 4d
[ 115.878086] RSP: 0018:ffffb8d5443d7d50 EFLAGS: 00010282
[ 115.878511] RAX: ffff8e4d87c41c80 RBX: ffff8e4d88ded780 RCX: ffff8e4da4333a00
[ 115.879128] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8e4d88ded780
[ 115.879715] RBP: ffff8e4d88ded780 R08: ffff8e4da4338000 R09: ffff8e4da43388c0
[ 115.880359] R10: 0000000000000002 R11: ffffb8d540158000 R12: ffffb8d5443d7da8
[ 115.880962] R13: ffff8e4d88ded780 R14: 0000000000000000 R15: 0000000000000000
[ 115.881548] FS: 00007f92c90c9800(0000) GS:ffff8e4dfdc00000(0000)
knlGS:0000000000000000
[ 115.882234] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 115.882713] CR2: 0000000000000010 CR3: 0000000022f4c002 CR4: 00000000000706f0
[ 115.883314] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 115.883966] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Fixes: f2ebb3a921c1 ("smarter propagate_mnt()")
Fixes: 5ec0811d3037 ("propogate_mnt: Handle the first propogated copy being a slave")
Cc: <stable@vger.kernel.org>
Reported-by: Ditang Chen <ditang.c@gmail.com>
Signed-off-by: Seth Forshee (Digital Ocean) <sforshee@kernel.org>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5b0db51215e895a361bc63132caa7cca36a53d6a upstream.
There is a wrong case of link() on overlay:
$ mkdir /lower /fuse /merge
$ mount -t fuse /fuse
$ mkdir /fuse/upper /fuse/work
$ mount -t overlay /merge -o lowerdir=/lower,upperdir=/fuse/upper,\
workdir=work
$ touch /merge/file
$ chown bin.bin /merge/file // the file's caller becomes "bin"
$ ln /merge/file /merge/lnkfile
Then we will get an error(EACCES) because fuse daemon checks the link()'s
caller is "bin", it denied this request.
In the changing history of ovl_link(), there are two key commits:
The first is commit bb0d2b8ad296 ("ovl: fix sgid on directory") which
overrides the cred's fsuid/fsgid using the new inode. The new inode's
owner is initialized by inode_init_owner(), and inode->fsuid is
assigned to the current user. So the override fsuid becomes the
current user. We know link() is actually modifying the directory, so
the caller must have the MAY_WRITE permission on the directory. The
current caller may should have this permission. This is acceptable
to use the caller's fsuid.
The second is commit 51f7e52dc943 ("ovl: share inode for hard link")
which removed the inode creation in ovl_link(). This commit move
inode_init_owner() into ovl_create_object(), so the ovl_link() just
give the old inode to ovl_create_or_link(). Then the override fsuid
becomes the old inode's fsuid, neither the caller nor the overlay's
mounter! So this is incorrect.
Fix this bug by using ovl mounter's fsuid/fsgid to do underlying
fs's link().
Link: https://lore.kernel.org/all/20220817102952.xnvesg3a7rbv576x@wittgenstein/T
Link: https://lore.kernel.org/lkml/20220825130552.29587-1-zhangtianci.1997@bytedance.com/t
Signed-off-by: Zhang Tianci <zhangtianci.1997@bytedance.com>
Signed-off-by: Jiachen Zhang <zhangjiachen.jaycee@bytedance.com>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Fixes: 51f7e52dc943 ("ovl: share inode for hard link")
Cc: <stable@vger.kernel.org> # v4.8
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
mount
commit 9f2b5debc07073e6dfdd774e3594d0224b991927 upstream.
Despite specifying UID and GID in mount command, the specified UID and GID
were not being assigned. This patch fixes this issue.
Link: https://lkml.kernel.org/r/C0264BF5-059C-45CF-B8DA-3A3BD2C803A2@live.com
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Reviewed-by: Viacheslav Dubeyko <slava@dubeyko.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit f7f291e14dde32a07b1f0aa06921d28f875a7b54 ]
When running xfstests against Azure the following oops occurred on an
arm64 system
Unable to handle kernel write to read-only memory at virtual address
ffff0001221cf000
Mem abort info:
ESR = 0x9600004f
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x0f: level 3 permission fault
Data abort info:
ISV = 0, ISS = 0x0000004f
CM = 0, WnR = 1
swapper pgtable: 4k pages, 48-bit VAs, pgdp=00000000294f3000
[ffff0001221cf000] pgd=18000001ffff8003, p4d=18000001ffff8003,
pud=18000001ff82e003, pmd=18000001ff71d003, pte=00600001221cf787
Internal error: Oops: 9600004f [#1] PREEMPT SMP
...
pstate: 80000005 (Nzcv daif -PAN -UAO -TCO BTYPE=--)
pc : __memcpy+0x40/0x230
lr : scatterwalk_copychunks+0xe0/0x200
sp : ffff800014e92de0
x29: ffff800014e92de0 x28: ffff000114f9de80 x27: 0000000000000008
x26: 0000000000000008 x25: ffff800014e92e78 x24: 0000000000000008
x23: 0000000000000001 x22: 0000040000000000 x21: ffff000000000000
x20: 0000000000000001 x19: ffff0001037c4488 x18: 0000000000000014
x17: 235e1c0d6efa9661 x16: a435f9576b6edd6c x15: 0000000000000058
x14: 0000000000000001 x13: 0000000000000008 x12: ffff000114f2e590
x11: ffffffffffffffff x10: 0000040000000000 x9 : ffff8000105c3580
x8 : 2e9413b10000001a x7 : 534b4410fb86b005 x6 : 534b4410fb86b005
x5 : ffff0001221cf008 x4 : ffff0001037c4490 x3 : 0000000000000001
x2 : 0000000000000008 x1 : ffff0001037c4488 x0 : ffff0001221cf000
Call trace:
__memcpy+0x40/0x230
scatterwalk_map_and_copy+0x98/0x100
crypto_ccm_encrypt+0x150/0x180
crypto_aead_encrypt+0x2c/0x40
crypt_message+0x750/0x880
smb3_init_transform_rq+0x298/0x340
smb_send_rqst.part.11+0xd8/0x180
smb_send_rqst+0x3c/0x100
compound_send_recv+0x534/0xbc0
smb2_query_info_compound+0x32c/0x440
smb2_set_ea+0x438/0x4c0
cifs_xattr_set+0x5d4/0x7c0
This is because in scatterwalk_copychunks(), we attempted to write to
a buffer (@sign) that was allocated in the stack (vmalloc area) by
crypt_message() and thus accessing its remaining 8 (x2) bytes ended up
crossing a page boundary.
To simply fix it, we could just pass @sign kmalloc'd from
crypt_message() and then we're done. Luckily, we don't seem to pass
any other vmalloc'd buffers in smb_rqst::rq_iov...
Instead, let's map the correct pages and offsets from vmalloc buffers
as well in cifs_sg_set_buf() and then avoiding such oopses.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
