| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
If some small bios of dirty node pages are supposed to be issued during the
sequential data writes, there-in well-produced consecutive data bios are able
to be split by the small node bios, resulting in performance degradation.
So, let's collect a number of dirty node pages until reaching a threshold.
And, by default, I set the threshold as 2MB, a segment size.
This improves sequential write performance on i5, 512GB SSD (830 w/ SATA2) as
follows.
Before: 231 MB/s -> After: 255 MB/s
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Reviewed-by: Namjae Jeon <namjae.jeon@samsung.com>
|
|
This patch adds f2fs_bmap operation to the data address space.
This enables f2fs to support swapfile.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
|
|
This was added for all the file systems before.
See the following commit.
commit id: 0b173bc4daa8f8ec03a85abf5e47b23502ff80af
[PATCH] mm: kill vma flag VM_CAN_NONLINEAR
This patch moves actual ptes filling for non-linear file mappings
into special vma operation: ->remap_pages().
File system must implement this method to get non-linear mappings support,
if it uses filemap_fault() then generic_file_remap_pages() can be used.
Now device drivers can implement this method and obtain nonlinear vma support."
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
|
|
Add __init to functions in init_f2fs_fs for code consistency.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
|
|
As the "status" debugfs entry will be maintained for entire F2FS filesystem
irrespective of the number of partitions.
So, we can move the initialization to the init part of the f2fs and destroy will
be done from exit part. After making changes, for individual partition mount -
entry creation code will not be executed.
Signed-off-by: Jianpeng Ma <majianpeng@gmail.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
|
|
There is an race condition between umounting f2fs and reading f2fs/status, which
results in oops.
Fox example:
Thread A Thread B
umount f2fs cat f2fs/status
f2fs_destroy_stats() { stat_show() {
list_for_each_entry_safe(&f2fs_stat_list)
list_del(&si->stat_list);
mutex_lock(&si->stat_lock);
si->sbi = NULL;
mutex_unlock(&si->stat_lock);
kfree(sbi->stat_info);
} mutex_lock(&si->stat_lock) <- si is gone.
...
}
Solution with a global lock: f2fs_stat_mutex:
Thread A Thread B
umount f2fs cat f2fs/status
f2fs_destroy_stats() { stat_show() {
mutex_lock(&f2fs_stat_mutex);
list_del(&si->stat_list);
mutex_unlock(&f2fs_stat_mutex);
kfree(sbi->stat_info); mutex_lock(&f2fs_stat_mutex);
} list_for_each_entry_safe(&f2fs_stat_list)
...
mutex_unlock(&f2fs_stat_mutex);
}
Signed-off-by: Jianpeng Ma <majianpeng@gmail.com>
[jaegeuk.kim@samsung.com: fix typos, description, and remove the existing lock]
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
|
|
Let's consider the usage of blk_plug in f2fs_write_data_pages().
We can come up with the two issues: lock contention and task awareness.
1. Merging bios prior to grabing "queue lock"
The f2fs merges consecutive IOs in the file system level before
submitting any bios, which is similar with the back merge by the
plugging mechanism in attempt_plug_merge(). Both of them need to acquire
no queue lock.
2. Merging policy with respect to tasks
The f2fs merges IOs as much as possible regardless of tasks, while
blk-plugging is conducted on a basis of tasks. As we can understand
there are trade-offs, f2fs tries to maximize the write performance with
well-merged bios.
As a result, if f2fs produces many consecutive but separated bios in
writepages(), it would be good to use blk-plugging since f2fs would be
able to avoid queue lock contention in the block layer by merging them.
But, f2fs merges IOs and submit one bio, which means that there are not
much chances to merge bios by attempt_plug_merge().
However, f2fs has already been used blk_plug by triggering generic_writepages()
in f2fs_write_data_pages().
So to make the overall code consistency, I'd like to remove blk_plug there.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
|
|
In call to f2fs_delete_entry, 'dir' time modification code is put
at two places.
So, remove the redundant code for timing update.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
|
|
Since, f2fs supports only 4KB blocksize, which is set at the beginning in
f2fs_fill_super. So, we do not need to again check this blocksize setting
in such case.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
|
|
The f2fs_fallocate() has two operations: punch_hole and expand_size.
Only in the case of punch_hole, dirty node pages can be produced, so let's
trigger f2fs_balance_fs() in this case only.
Furthermore, let's trigger it at every data truncation routine.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
|
|
The f2fs_balance_fs() is to check the number of free sections and decide whether
it needs to conduct cleaning or not. If there are not enough free sections, the
cleaning job should be started.
In order to control an amount of free sections even under high utilization, f2fs
should call f2fs_balance_fs at all the VFS interfaces that are able to produce
dirty pages.
This patch adds the function calls in the missing interfaces as follows.
1. f2fs_setxattr()
The f2fs_setxattr() produces dirty node pages so that we should call
f2fs_balance_fs() either likewise doing in other VFS interfaces such as
f2fs_lookup(), f2fs_mkdir(), and so on.
2. f2fs_sync_file()
We should guarantee serving free sections for syncing metadata during fsync.
Previously, there is no space check before triggering checkpoint and
sync_node_pages.
Therefore, if a bunch of fsync calls are triggered under 100% of FS utilization,
f2fs is able to be faced with no free sections, resulting in BUG_ON().
3. f2fs_sync_fs()
Before calling write_checkpoint(), we should guarantee that there are minimum
free sections.
4. f2fs_write_inode()
f2fs_write_inode() is also able to produce dirty node pages.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
|
|
I'd like to revisit the f2fs_gc flow and rewrite as follows.
1. In practical, the nGC parameter of f2fs_gc is meaningless. So, let's
remove it.
2. Background GC marks victim blocks as dirty one at a time.
3. Foreground GC should do cleaning job until acquiring enough free
sections. Afterwards, it needs to do checkpoint.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
|
|
This patch resolves Coverity #753102:
>>> No check of the return value of "f2fs_add_link(&dent, inode)".
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
|
|
This patch resolves Coverity #751303:
>>> CID 753103: Explicit null dereferenced (FORWARD_NULL) Passing null
>>> pointer "value" to function "f2fs_acl_from_disk(char const *, size_t)",
which dereferences it.
[Error path]
- value = NULL;
- retval = 0 by f2fs_getxattr();
- f2fs_acl_from_disk(value:NULL, ...);
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
|
|
This patch resolves Coverity #753112.
In practical, the existing code flow does not fall into the reported errorneous
path. But, anyway, let's avoid this for future.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
|
|
Update partition info output under debug FS to reflect segment layout correctly.
Signed-off-by: Huajun Li <huajun.li.lee@gmail.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
|
|
While creating a new entry for addition to the list(orphan inode list
and fsync inode entry list), there is no need to call HEAD initialization
for these entries. So, remove that init part.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
|
|
After doing a punch hole or expanding inode doing fallocation.
The change and modification time are not update for the file.
So, update time after no issue is observed in fallocate.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
|
|
Introduced f2fs_msg function to differentiate f2fs specific messages in
the log. And, added few informative prints in the mount path, to convey
proper error in case of mount failure.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs bug fixes from Jaegeuk Kim:
"This patch-set includes two major bug fixes:
- incorrect IUsed provided by *df -i*, and
- lookup failure of parent inodes in corner cases.
[Other Bug Fixes]
- Fix error handling routines
- Trigger recovery process correctly
- Resolve build failures due to missing header files
[Etc]
- Add a MAINTAINERS entry for f2fs
- Fix and clean up variables, functions, and equations
- Avoid warnings during compilation"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs:
f2fs: unify string length declarations and usage
f2fs: clean up unused variables and return values
f2fs: clean up the start_bidx_of_node function
f2fs: remove unneeded variable from f2fs_sync_fs
f2fs: fix fsync_inode list addition logic and avoid invalid access to memory
f2fs: remove unneeded initialization of nr_dirty in dirty_seglist_info
f2fs: handle error from f2fs_iget_nowait
f2fs: fix equation of has_not_enough_free_secs()
f2fs: add MAINTAINERS entry
f2fs: return a default value for non-void function
f2fs: invalidate the node page if allocation is failed
f2fs: add missing #include <linux/prefetch.h>
f2fs: do f2fs_balance_fs in front of dir operations
f2fs: should recover orphan and fsync data
f2fs: fix handling errors got by f2fs_write_inode
f2fs: fix up f2fs_get_parent issue to retrieve correct parent inode number
f2fs: fix wrong calculation on f_files in statfs
f2fs: remove set_page_dirty for atomic f2fs_end_io_write
|
|
Pull GFS2 fixes from Steven Whitehouse:
"Here are four small bug fixes for GFS2. There is no common theme here
really, just a few items that were fixed recently.
The first fixes lock name generation when the glock number is 0. The
second fixes a race allocating reservation structures and the final
two fix a performance issue by making small changes in the allocation
code."
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-fixes:
GFS2: Reset rd_last_alloc when it reaches the end of the rgrp
GFS2: Stop looking for free blocks at end of rgrp
GFS2: Fix race in gfs2_rs_alloc
GFS2: Initialize hex string to '0'
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs
Pull ecryptfs fixes from Tyler Hicks:
"Two self-explanatory fixes and a third patch which improves
performance: when overwriting a full page in the eCryptfs page cache,
skip reading in and decrypting the corresponding lower page."
* tag 'ecryptfs-3.8-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs:
fs/ecryptfs/crypto.c: make ecryptfs_encode_for_filename() static
eCryptfs: fix to use list_for_each_entry_safe() when delete items
eCryptfs: Avoid unnecessary disk read and data decryption during writing
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 bug fixes from Ted Ts'o:
"Various bug fixes for ext4. Perhaps the most serious bug fixed is one
which could cause file system corruptions when performing file punch
operations."
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: avoid hang when mounting non-journal filesystems with orphan list
ext4: lock i_mutex when truncating orphan inodes
ext4: do not try to write superblock on ro remount w/o journal
ext4: include journal blocks in df overhead calcs
ext4: remove unaligned AIO warning printk
ext4: fix an incorrect comment about i_mutex
ext4: fix deadlock in journal_unmap_buffer()
ext4: split off ext4_journalled_invalidatepage()
jbd2: fix assertion failure in jbd2_journal_flush()
ext4: check dioread_nolock on remount
ext4: fix extent tree corruption caused by hole punch
|
|
Remove the unused argument (formerly no_context) from mpol_parse_str()
and from mpol_to_str().
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
EPOLL_CTL_MOD sets the interest mask before calling f_op->poll() to
ensure events are not missed. Since the modifications to the interest
mask are not protected by the same lock as ep_poll_callback, we need to
ensure the change is visible to other CPUs calling ep_poll_callback.
We also need to ensure f_op->poll() has an up-to-date view of past
events which occured before we modified the interest mask. So this
barrier also pairs with the barrier in wq_has_sleeper().
This should guarantee either ep_poll_callback or f_op->poll() (or both)
will notice the readiness of a recently-ready/modified item.
This issue was encountered by Andreas Voellmy and Junchang(Jason) Wang in:
http://thread.gmane.org/gmane.linux.kernel/1408782/
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Davide Libenzi <davidel@xmailserver.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: David Miller <davem@davemloft.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andreas Voellmy <andreas.voellmy@yale.edu>
Tested-by: "Junchang(Jason) Wang" <junchang.wang@yale.edu>
Cc: netdev@vger.kernel.org
Cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In function rg_mblk_search, it's searching for multiple blocks in
a given state (e.g. "free"). If there's an active block reservation
its goal is the next free block of that. If the resource group
contains the dinode's goal block, that's used for the search. But
if neither is the case, it uses the rgrp's last allocated block.
That way, consecutive allocations appear after one another on media.
The problem comes in when you hit the end of the rgrp; it would never
start over and search from the beginning. This became a problem,
since if you deleted all the files and data from the rgrp, it would
never start over and find free blocks. So it had to keep searching
further out on the media to allocate blocks. This patch resets the
rd_last_alloc after it does an unsuccessful search at the end of
the rgrp.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
This patch adds a return code check after calling function
gfs2_rbm_from_block while determining the free extent size.
That way, when the end of an rgrp is reached, it won't try
to process unaligned blocks after the end.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
QE aio tests uncovered a race condition in gfs2_rs_alloc where it's possible
to come out of the function with a valid ip->i_res allocation but it gets
freed before use resulting in a NULL ptr dereference.
This patch envelopes the initial short-circuit check for non-NULL ip->i_res
into the mutex lock. With this patch, I was able to successfully run the
reproducer test multiple times.
Resolves: rhbz#878476
Signed-off-by: Abhi Das <adas@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
When generating the DLM lock name, a value of 0 would skip
the loop and leave the string unchanged. This left locks with
a value of 0 unlabeled. Initializing the string to '0' fixes this.
Signed-off-by: Nathan Straz <nstraz@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
This patch is intended to unify string length declarations and usage.
There are number of calls to strlen which return size_t object.
The size of this object depends on compiler if it will be bigger,
equal or even smaller than an unsigned int
Signed-off-by: Leon Romanovsky <leon@leon.nu>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
|
|
This patch cleans up a couple of unnecessary codes related to unused variables
and return values.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
|
|
This patch also resolves the following warning reported by kbuild test robot.
fs/f2fs/gc.c: In function 'start_bidx_of_node':
fs/f2fs/gc.c:453:21: warning: 'bidx' may be used uninitialized in this function
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
|
|
We can directly return '0' from the function, instead of introducing a
'ret' variable.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
|
|
In function find_fsync_dnodes() - the fsync inodes gets added to the list, but
in one path suppose f2fs_iget results in error, in such case - error gets added
to the fsync inode list.
In next call to recover_data()->get_fsync_inode()
entry = list_entry(this, struct fsync_inode_entry, list);
if (entry->inode->i_ino == ino)
This can result in "invalid access to memory" when it encounters 'error' as
entry in the fsync inode list.
So, add the fsync inode entry to the list only in case of no errors.
And, free the object at that point itself in case of issue.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
|
|
Since, the memory for the object of dirty_seglist_info is allocated
using kzalloc - which returns zeroed out memory. So, there is no need
to initialize the nr_dirty values with zeroes.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
|
|
In case f2fs_iget_nowait returns error, it results in truncate_hole being
called with 'error' value as inode pointer. There is no check in truncate_hole
for valid inode, so it could result in crash due "invalid access to memory".
Avoid this by handling error condition properly.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
|
|
Practically, has_not_enough_free_secs() should calculate with the numbers of
current node and directory data blocks together.
Actually the equation was implemented in need_to_flush().
So, this patch removes need_flush() and moves the equation into
has_not_enough_free_secs().
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
|
|
This patch resolves a build warning reported by kbuild test robot.
"
fs/f2fs/segment.c: In function '__get_segment_type':
fs/f2fs/segment.c:806:1: warning: control reaches end of non-void
function [-Wreturn-type]
"
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
|
|
The new_node_page() is processed as the following procedure.
1. A new node page is allocated.
2. Set PageUptodate with proper footer information.
3. Check if there is a free space for allocation
4.a. If there is no space, f2fs returns with -ENOSPC.
4.b. Otherwise, go next.
In the case of step #4.a, f2fs remains a wrong node page in the page cache
with the uptodate flag.
Also, even though a new node page is allocated successfully, an error can be
occurred afterwards due to allocation failure of the other data structures.
In such a case, remove_inode_page() would be triggered, so that we have to
clear uptodate flag in truncate_node() too.
So, we should remove the uptodate flag, if allocation is failed.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
|
|
m68k allmodconfig:
fs/f2fs/data.c: In function ‘read_end_io’:
fs/f2fs/data.c:311: error: implicit declaration of function ‘prefetchw’
fs/f2fs/segment.c: In function ‘f2fs_end_io_write’:
fs/f2fs/segment.c:628: error: implicit declaration of function ‘prefetchw’
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
|
|
When trying to mount a file system which does not contain a journal,
but which does have a orphan list containing an inode which needs to
be truncated, the mount call with hang forever in
ext4_orphan_cleanup() because ext4_orphan_del() will return
immediately without removing the inode from the orphan list, leading
to an uninterruptible loop in kernel code which will busy out one of
the CPU's on the system.
This can be trivially reproduced by trying to mount the file system
found in tests/f_orphan_extents_inode/image.gz from the e2fsprogs
source tree. If a malicious user were to put this on a USB stick, and
mount it on a Linux desktop which has automatic mounts enabled, this
could be considered a potential denial of service attack. (Not a big
deal in practice, but professional paranoids worry about such things,
and have even been known to allocate CVE numbers for such problems.)
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Cc: stable@vger.kernel.org
|
|
Commit c278531d39 added a warning when ext4_flush_unwritten_io() is
called without i_mutex being taken. It had previously not been taken
during orphan cleanup since races weren't possible at that point in
the mount process, but as a result of this c278531d39, we will now see
a kernel WARN_ON in this case. Take the i_mutex in
ext4_orphan_cleanup() to suppress this warning.
Reported-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Cc: stable@vger.kernel.org
|
|
With user namespaces enabled building f2fs fails with:
CC fs/f2fs/acl.o
fs/f2fs/acl.c: In function ‘f2fs_acl_from_disk’:
fs/f2fs/acl.c:85:21: error: ‘struct posix_acl_entry’ has no member named ‘e_id’
make[2]: *** [fs/f2fs/acl.o] Error 1
make[2]: Target `__build' not remade because of errors.
e_id is a backwards compatibility field only used for file systems
that haven't been converted to use kuids and kgids. When the posix
acl tag field is neither ACL_USER nor ACL_GROUP assigning e_id is
unnecessary. Remove the assignment so f2fs will build with user
namespaces enabled.
Cc: Namjae Jeon <namjae.jeon@samsung.com>
Cc: Amit Sahrawat <a.sahrawat@samsung.com>
Acked-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
In order to conserve free sections to deal with the worst-case scenarios, f2fs
should be able to freeze all the directory operations especially when there are
not enough free sections. The f2fs_balance_fs() is for this use.
When FS utilization becomes almost 100%, directory operations can be failed due
to -ENOSPC frequently, which produces some dirty node pages occasionally.
Previously, in such a case, f2fs_balance_fs() is not able to be triggered since
it is triggered only if the directory operation ends up with success.
So, this patch triggers f2fs_balance_fs() at first before handling directory
operations.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
|
|
The recovery routine should do all the time regardless of normal umount action.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
|
|
Ruslan reported that f2fs hangs with an infinite loop in f2fs_sync_file():
while (sync_node_pages(sbi, inode->i_ino, &wbc) == 0)
f2fs_write_inode(inode, NULL);
The reason was revealed that the cold flag is not set even thought this inode is
a normal file. Therefore, sync_node_pages() skips to write node blocks since it
only writes cold node blocks.
The cold flag is stored to the node_footer in node block, and whenever a new
node page is allocated, it is set according to its file type, file or directory.
But, after sudden-power-off, when recovering the inode page, f2fs doesn't recover
its cold flag.
So, let's assign the cold flag in more right places.
One more thing:
If f2fs_write_inode() returns an error due to whatever situations, there would
be no dirty node pages so that sync_node_pages() returns zero.
(i.e., zero means nothing was written.)
Reported-by: Ruslan N. Marchenko <me@ruff.mobi>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
|
|
Test Case:
[NFS Client]
ls -lR .
[NFS Server]
while [ 1 ]
do
echo 3 > /proc/sys/vm/drop_caches
done
Error on NFS Client: "No such file or directory"
When cache is dropped at the server, it results in lookup failure at the
NFS client due to non-connection with the parent. The default path is it
initiates a lookup by calculating the hash value for the name, even though
the hash values stored on the disk for "." and ".." is maintained as zero,
which results in failure from find_in_block due to not matching HASH values.
Fix up, by using the correct hashing values for these entries.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
|
|
In f2fs_statfs(), f_files should be the total number of available inodes
instead of the currently allocated inodes.
So, this patch should resolve the reported bug below.
Note that, showing 10% usage is not a bug, since f2fs reveals whole volume size
as much as possible and shows the space overhead as *used*.
This policy is fair enough with respect to other file systems.
<Reported Bug>
(loop0 is backed by 1GiB file)
$ mkfs.f2fs /dev/loop0
F2FS-tools: Ver: 1.1.0 (2012-12-11)
Info: sector size = 512
Info: total sectors = 2097152 (in 512bytes)
Info: zone aligned segment0 blkaddr: 512
Info: format successful
$ mount /dev/loop0 mnt/
$ df mnt/
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/loop0 1046528 98312 929784 10%
/home/zeta/linux-devel/mtd-bench/mnt
$ df mnt/ -i
Filesystem Inodes IUsed IFree IUse% Mounted on
/dev/loop0 1 -465918 465919 - /home/zeta/linux-devel/mtd-bench/mnt
Notice IUsed is negative. Also, 10% usage on a fresh f2fs seems too
much to be correct.
Reported-and-Tested-by: Ezequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
|
|
We should guarantee not to do *scheduling while atomic*.
I found, in atomic f2fs_end_io_write(), there is a set_page_dirty() call
to deal with IO errors.
But, set_page_dirty() calls:
-> f2fs_set_data_page_dirty()
-> set_dirty_dir_page()
-> cond_resched() which results in scheduling.
In order to avoid this, I'd like to remove simply set_page_dirty(),
since the page is already marked as ERROR and f2fs will be operated
as the read-only mode as well.
So, there is no recovery issue with this.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
|
|
While testing the pid namespace code I hit this nasty warning.
[ 176.262617] ------------[ cut here ]------------
[ 176.263388] WARNING: at /home/eric/projects/linux/linux-userns-devel/kernel/softirq.c:160 local_bh_enable_ip+0x7a/0xa0()
[ 176.265145] Hardware name: Bochs
[ 176.265677] Modules linked in:
[ 176.266341] Pid: 742, comm: bash Not tainted 3.7.0userns+ #18
[ 176.266564] Call Trace:
[ 176.266564] [<ffffffff810a539f>] warn_slowpath_common+0x7f/0xc0
[ 176.266564] [<ffffffff810a53fa>] warn_slowpath_null+0x1a/0x20
[ 176.266564] [<ffffffff810ad9ea>] local_bh_enable_ip+0x7a/0xa0
[ 176.266564] [<ffffffff819308c9>] _raw_spin_unlock_bh+0x19/0x20
[ 176.266564] [<ffffffff8123dbda>] proc_free_inum+0x3a/0x50
[ 176.266564] [<ffffffff8111d0dc>] free_pid_ns+0x1c/0x80
[ 176.266564] [<ffffffff8111d195>] put_pid_ns+0x35/0x50
[ 176.266564] [<ffffffff810c608a>] put_pid+0x4a/0x60
[ 176.266564] [<ffffffff8146b177>] tty_ioctl+0x717/0xc10
[ 176.266564] [<ffffffff810aa4d5>] ? wait_consider_task+0x855/0xb90
[ 176.266564] [<ffffffff81086bf9>] ? default_spin_lock_flags+0x9/0x10
[ 176.266564] [<ffffffff810cab0a>] ? remove_wait_queue+0x5a/0x70
[ 176.266564] [<ffffffff811e37e8>] do_vfs_ioctl+0x98/0x550
[ 176.266564] [<ffffffff810b8a0f>] ? recalc_sigpending+0x1f/0x60
[ 176.266564] [<ffffffff810b9127>] ? __set_task_blocked+0x37/0x80
[ 176.266564] [<ffffffff810ab95b>] ? sys_wait4+0xab/0xf0
[ 176.266564] [<ffffffff811e3d31>] sys_ioctl+0x91/0xb0
[ 176.266564] [<ffffffff810a95f0>] ? task_stopped_code+0x50/0x50
[ 176.266564] [<ffffffff81939199>] system_call_fastpath+0x16/0x1b
[ 176.266564] ---[ end trace 387af88219ad6143 ]---
It turns out that spin_unlock_bh(proc_inum_lock) is not safe when
put_pid is called with another spinlock held and irqs disabled.
For now take the easy path and use spin_lock_irqsave(proc_inum_lock)
in proc_free_inum and spin_loc_irq in proc_alloc_inum(proc_inum_lock).
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
