| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[ Upstream commit 1f06c942aa709d397cf6bed577a0d10a61509667 ]
Only one of the callers of __add_block_group_free_space() aborts the
transaction if the call fails, while the others don't do it and it's
either never done up the call chain or much higher in the call chain.
So make sure we abort the transaction at __add_block_group_free_space()
if it fails, which brings a couple benefits:
1) If some call chain never aborts the transaction, we avoid having some
metadata inconsistency because BLOCK_GROUP_FLAG_NEEDS_FREE_SPACE is
cleared when we enter __add_block_group_free_space() and therefore
__add_block_group_free_space() is never called again to add the block
group items to the free space tree, since the function is only called
when that flag is set in a block group;
2) If the call chain already aborts the transaction, then we get a better
trace that points to the exact step from __add_block_group_free_space()
which failed, which is better for analysis.
So abort the transaction at __add_block_group_free_space() if any of its
steps fails.
CC: stable@vger.kernel.org # 6.6+
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit b63c8c1ede4407835cb8c8bed2014d96619389f3 ]
Transaction aborts should be done next to the place the error happens,
which was not done in add_block_group_free_space().
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: 1f06c942aa70 ("btrfs: always abort transaction on failure to add block group to free space tree")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c0e1b774f68bdbea1618e356e30672c7f1e32509 upstream.
The commit 65c66047259f ("proc: fix the issue of proc_mem_open returning
NULL") caused proc_maps_open() to return -ESRCH when proc_mem_open()
returns NULL. This breaks legitimate /proc/<pid>/maps access for kernel
threads since kernel threads have NULL mm_struct.
The regression causes perf to fail and exit when profiling a kernel
thread:
# perf record -v -g -p $(pgrep kswapd0)
...
couldn't open /proc/65/task/65/maps
This patch partially reverts the commit to fix it.
Link: https://lkml.kernel.org/r/20250807165455.73656-1-wjl.linux@gmail.com
Fixes: 65c66047259f ("proc: fix the issue of proc_mem_open returning NULL")
Signed-off-by: Jialin Wang <wjl.linux@gmail.com>
Cc: Penglei Jiang <superman.xpt@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9308366f062129d52e0ee3f7a019f7dd41db33df upstream.
As described in commit 7a54947e727b ('Merge patch series "fs: allow
changing idmappings"'), open_tree_attr(2) was necessary in order to
allow for a detached mount to be created and have its idmappings changed
without the risk of any racing threads operating on it. For this reason,
mount_setattr(2) still does not allow for id-mappings to be changed.
However, there was a bug in commit 2462651ffa76 ("fs: allow changing
idmappings") which allowed users to bypass this restriction by calling
open_tree_attr(2) *without* OPEN_TREE_CLONE.
can_idmap_mount() prevented this bug from allowing an attached
mountpoint's id-mapping from being modified (thanks to an is_anon_ns()
check), but this still allows for detached (but visible) mounts to have
their be id-mapping changed. This risks the same UAF and locking issues
as described in the merge commit, and was likely unintentional.
Fixes: 2462651ffa76 ("fs: allow changing idmappings")
Cc: stable@vger.kernel.org # v6.15+
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Link: https://lore.kernel.org/20250808-open_tree_attr-bugfix-idmap-v1-1-0ec7bc05646c@cyphar.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9d98cf4632258720f18265a058e62fde120c0151 upstream.
Both jbd2_log_do_checkpoint() and jbd2_journal_shrink_checkpoint_list()
periodically release j_list_lock after processing a batch of buffers to
avoid long hold times on the j_list_lock. However, since both functions
contend for j_list_lock, the combined time spent waiting and processing
can be significant.
jbd2_journal_shrink_checkpoint_list() explicitly calls cond_resched() when
need_resched() is true to avoid softlockups during prolonged operations.
But jbd2_log_do_checkpoint() only exits its loop when need_resched() is
true, relying on potentially sleeping functions like __flush_batch() or
wait_on_buffer() to trigger rescheduling. If those functions do not sleep,
the kernel may hit a softlockup.
watchdog: BUG: soft lockup - CPU#3 stuck for 156s! [kworker/u129:2:373]
CPU: 3 PID: 373 Comm: kworker/u129:2 Kdump: loaded Not tainted 6.6.0+ #10
Hardware name: Huawei TaiShan 2280 /BC11SPCD, BIOS 1.27 06/13/2017
Workqueue: writeback wb_workfn (flush-7:2)
pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : native_queued_spin_lock_slowpath+0x358/0x418
lr : jbd2_log_do_checkpoint+0x31c/0x438 [jbd2]
Call trace:
native_queued_spin_lock_slowpath+0x358/0x418
jbd2_log_do_checkpoint+0x31c/0x438 [jbd2]
__jbd2_log_wait_for_space+0xfc/0x2f8 [jbd2]
add_transaction_credits+0x3bc/0x418 [jbd2]
start_this_handle+0xf8/0x560 [jbd2]
jbd2__journal_start+0x118/0x228 [jbd2]
__ext4_journal_start_sb+0x110/0x188 [ext4]
ext4_do_writepages+0x3dc/0x740 [ext4]
ext4_writepages+0xa4/0x190 [ext4]
do_writepages+0x94/0x228
__writeback_single_inode+0x48/0x318
writeback_sb_inodes+0x204/0x590
__writeback_inodes_wb+0x54/0xf8
wb_writeback+0x2cc/0x3d8
wb_do_writeback+0x2e0/0x2f8
wb_workfn+0x80/0x2a8
process_one_work+0x178/0x3e8
worker_thread+0x234/0x3b8
kthread+0xf0/0x108
ret_from_fork+0x10/0x20
So explicitly call cond_resched() in jbd2_log_do_checkpoint() to avoid
softlockup.
Cc: stable@kernel.org
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Link: https://patch.msgid.link/20250812063752.912130-1-libaokun@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6b65028e2b51c023a816eabffea88980fdd5564e upstream.
Commit d279c80e0bac ("iomap: inline iomap_dio_bio_opflags()") has broken
the logic in iomap_dio_bio_iter() in a way that when the device does
support FUA (or has no writeback cache) and the direct IO happens to
freshly allocated or unwritten extents, we will *not* issue fsync after
completing direct IO O_SYNC / O_DSYNC write because the
IOMAP_DIO_WRITE_THROUGH flag stays mistakenly set. Fix the problem by
clearing IOMAP_DIO_WRITE_THROUGH whenever we do not perform FUA write as
it was originally intended.
CC: John Garry <john.g.garry@oracle.com>
CC: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Fixes: d279c80e0bac ("iomap: inline iomap_dio_bio_opflags()")
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/20250730102840.20470-2-jack@suse.cz
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 77de19b6867f2740cdcb6c9c7e50d522b47847a4 upstream.
As Jiaming Zhang reported:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x1c1/0x2a0 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0x17e/0x800 mm/kasan/report.c:480
kasan_report+0x147/0x180 mm/kasan/report.c:593
data_blkaddr fs/f2fs/f2fs.h:3053 [inline]
f2fs_data_blkaddr fs/f2fs/f2fs.h:3058 [inline]
f2fs_get_dnode_of_data+0x1a09/0x1c40 fs/f2fs/node.c:855
f2fs_reserve_block+0x53/0x310 fs/f2fs/data.c:1195
prepare_write_begin fs/f2fs/data.c:3395 [inline]
f2fs_write_begin+0xf39/0x2190 fs/f2fs/data.c:3594
generic_perform_write+0x2c7/0x910 mm/filemap.c:4112
f2fs_buffered_write_iter fs/f2fs/file.c:4988 [inline]
f2fs_file_write_iter+0x1ec8/0x2410 fs/f2fs/file.c:5216
new_sync_write fs/read_write.c:593 [inline]
vfs_write+0x546/0xa90 fs/read_write.c:686
ksys_write+0x149/0x250 fs/read_write.c:738
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xf3/0x3d0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
The root cause is in the corrupted image, there is a dnode has the same
node id w/ its inode, so during f2fs_get_dnode_of_data(), it tries to
access block address in dnode at offset 934, however it parses the dnode
as inode node, so that get_dnode_addr() returns 360, then it tries to
access page address from 360 + 934 * 4 = 4096 w/ 4 bytes.
To fix this issue, let's add sanity check for node id of all direct nodes
during f2fs_get_dnode_of_data().
Cc: stable@kernel.org
Reported-by: Jiaming Zhang <r772577952@gmail.com>
Closes: https://groups.google.com/g/syzkaller/c/-ZnaaOOfO3M
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 74857fdc5dd2cdcdeb6e99bdf26976fd9299d2bb upstream.
The NODATASUM message was printed twice by mistake and the NODATACOW was
missing from the 'unset' part. Fix the duplication and make the output
look the same.
Fixes: eddb1a433f26 ("btrfs: add reconfigure callback for fs_context")
CC: stable@vger.kernel.org # 6.8+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Kyoji Ogasawara <sawara04.o@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b435ab556bea875c088485f271ef2709ca1d75f5 upstream.
After the fsconfig migration in 6.8, mount option info messages are no
longer displayed during mount operations because btrfs_emit_options() is
only called during remount, not during initial mount.
Fix this by calling btrfs_emit_options() in btrfs_fill_super() after
open_ctree() succeeds. Additionally, prevent log duplication by ensuring
btrfs_check_options() handles validation with warn-level and err-level
messages, while btrfs_emit_options() provides info-level messages.
Fixes: eddb1a433f26 ("btrfs: add reconfigure callback for fs_context")
CC: stable@vger.kernel.org # 6.8+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Kyoji Ogasawara <sawara04.o@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit edf842abe4368ce3c423343cf4b23b210fcf1622 upstream.
Fix a wrong log message that appears when the "nobarrier" mount option
is unset. When "nobarrier" is unset, barrier is actually enabled.
However, the log incorrectly stated "turning off barriers".
Fixes: eddb1a433f26 ("btrfs: add reconfigure callback for fs_context")
CC: stable@vger.kernel.org # 6.12+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Kyoji Ogasawara <sawara04.o@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5c4b93f4c8e5c53574c1a48d66a27a2c68b414af upstream.
Since commit 13bb483d32ab ("btrfs: zoned: activate metadata block group on
write time"), we activate a metadata block group at the write time. If the
zone capacity is small enough, we can allocate the entire region before the
first write. Then, we hit the btrfs_zoned_bg_is_full() in
btrfs_zone_activate() and the activation fails.
For a data block group, we activate it at the allocation time and we should
check the fullness condition in the caller side. Add, a WARN to check the
fullness condition.
For a metadata block group, we don't need the fullness check because we
activate it at the write time. Instead, activating it once it is written
should be invalid. Catch that with a WARN too.
Fixes: 13bb483d32ab ("btrfs: zoned: activate metadata block group on write time")
CC: stable@vger.kernel.org # 6.6+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 02c7f7219ac0e2277b3379a3a0e9841ef464b6d4 upstream.
In a filesystem with a block size larger than 4KB, the hole length
calculation for a non-extent inode in ext4_ind_map_blocks() can easily
exceed INT_MAX. Then it could return a zero length hole and trigger the
following waring and infinite in the iomap infrastructure.
------------[ cut here ]------------
WARNING: CPU: 3 PID: 434101 at fs/iomap/iter.c:34 iomap_iter_done+0x148/0x190
CPU: 3 UID: 0 PID: 434101 Comm: fsstress Not tainted 6.16.0-rc7+ #128 PREEMPT(voluntary)
Hardware name: QEMU KVM Virtual Machine, BIOS unknown 2/2/2022
pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : iomap_iter_done+0x148/0x190
lr : iomap_iter+0x174/0x230
sp : ffff8000880af740
x29: ffff8000880af740 x28: ffff0000db8e6840 x27: 0000000000000000
x26: 0000000000000000 x25: ffff8000880af830 x24: 0000004000000000
x23: 0000000000000002 x22: 000001bfdbfa8000 x21: ffffa6a41c002e48
x20: 0000000000000001 x19: ffff8000880af808 x18: 0000000000000000
x17: 0000000000000000 x16: ffffa6a495ee6cd0 x15: 0000000000000000
x14: 00000000000003d4 x13: 00000000fa83b2da x12: 0000b236fc95f18c
x11: ffffa6a4978b9c08 x10: 0000000000001da0 x9 : ffffa6a41c1a2a44
x8 : ffff8000880af5c8 x7 : 0000000001000000 x6 : 0000000000000000
x5 : 0000000000000004 x4 : 000001bfdbfa8000 x3 : 0000000000000000
x2 : 0000000000000000 x1 : 0000004004030000 x0 : 0000000000000000
Call trace:
iomap_iter_done+0x148/0x190 (P)
iomap_iter+0x174/0x230
iomap_fiemap+0x154/0x1d8
ext4_fiemap+0x110/0x140 [ext4]
do_vfs_ioctl+0x4b8/0xbc0
__arm64_sys_ioctl+0x8c/0x120
invoke_syscall+0x6c/0x100
el0_svc_common.constprop.0+0x48/0xf0
do_el0_svc+0x24/0x38
el0_svc+0x38/0x120
el0t_64_sync_handler+0x10c/0x138
el0t_64_sync+0x198/0x1a0
---[ end trace 0000000000000000 ]---
Cc: stable@kernel.org
Fixes: facab4d9711e ("ext4: return hole from ext4_map_blocks()")
Reported-by: Qu Wenruo <wqu@suse.com>
Closes: https://lore.kernel.org/linux-ext4/9b650a52-9672-4604-a765-bb6be55d1e4a@gmx.com/
Tested-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20250811064532.1788289-1-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 76dba1fe277f6befd6ef650e1946f626c547387a upstream.
Replace kmalloc(size * sizeof) with kmalloc_array() for safer memory
allocation and overflow prevention.
Cc: stable@kernel.org
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Link: https://patch.msgid.link/20250811125816.570142-1-liaoyuanhong@vivo.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c5e104a91e7b6fa12c1dc2d8bf84abb7ef9b89ad upstream.
When the file system is frozen in preparation for taking an LVM
snapshot, the journal is checkpointed and if the orphan_file feature
is enabled, and the orphan file is empty, we clear the orphan_present
feature flag. But if there are pending inodes that need to be removed
the orphan_present feature flag can't be cleared.
The problem comes if the block device is read-only. In that case, we
can't process the orphan inode list, so it is skipped in
ext4_orphan_cleanup(). But then in ext4_mark_recovery_complete(),
this results in the ext4 error "Orphan file not empty on read-only fs"
firing and the file system mount is aborted.
Fix this by clearing the needs_recovery flag in the block device is
read-only. We do this after the call to ext4_load_and_init-journal()
since there are some error checks need to be done in case the journal
needs to be replayed and the block device is read-only, or if the
block device containing the externa journal is read-only, etc.
Cc: stable@kernel.org
Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1108271
Cc: stable@vger.kernel.org
Fixes: 02f310fcf47f ("ext4: Speedup ext4 orphan inode handling")
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3ffbdd1f1165f1b2d6a94d1b1aabef57120deaf7 upstream.
In some cases like small FSes with no meta_bg and where the resize
doesn't need extra gdt blocks as it can fit in the current one,
s_reserved_gdt_blocks is set as 0, which causes fsmap to emit a 0
length entry, which is incorrect.
$ mkfs.ext4 -b 65536 -O bigalloc /dev/sda 5G
$ mount /dev/sda /mnt/scratch
$ xfs_io -c "fsmap -d" /mnt/scartch
0: 253:48 [0..127]: static fs metadata 128
1: 253:48 [128..255]: special 102:1 128
2: 253:48 [256..255]: special 102:2 0 <---- 0 len entry
3: 253:48 [256..383]: special 102:3 128
Fix this by adding a check for this case.
Cc: stable@kernel.org
Fixes: 0c9ec4beecac ("ext4: support GETFSMAP ioctls")
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://patch.msgid.link/08781b796453a5770112aa96ad14c864fbf31935.1754377641.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit bae76c035bf0852844151e68098c9b7cd63ef238 upstream.
With bigalloc enabled, the logic to report last extent has a bug since
we try to use cluster units instead of block units. This can cause an
issue where extra incorrect entries might be returned back to the
user. This was flagged by generic/365 with 64k bs and -O bigalloc.
** Details of issue **
The issue was noticed on 5G 64k blocksize FS with -O bigalloc which has
only 1 bg.
$ xfs_io -c "fsmap -d" /mnt/scratch
0: 253:48 [0..127]: static fs metadata 128 /* sb */
1: 253:48 [128..255]: special 102:1 128 /* gdt */
3: 253:48 [256..383]: special 102:3 128 /* block bitmap */
4: 253:48 [384..2303]: unknown 1920 /* flex bg empty space */
5: 253:48 [2304..2431]: special 102:4 128 /* inode bitmap */
6: 253:48 [2432..4351]: unknown 1920 /* flex bg empty space */
7: 253:48 [4352..6911]: inodes 2560
8: 253:48 [6912..538623]: unknown 531712
9: 253:48 [538624..10485759]: free space 9947136
The issue can be seen with:
$ xfs_io -c "fsmap -d 0 3" /mnt/scratch
0: 253:48 [0..127]: static fs metadata 128
1: 253:48 [384..2047]: unknown 1664
Only the first entry was expected to be returned but we get 2. This is
because:
ext4_getfsmap_datadev()
first_cluster, last_cluster = 0
...
info->gfi_last = true;
ext4_getfsmap_datadev_helper(sb, end_ag, last_cluster + 1, 0, info);
fsb = C2B(1) = 16
fslen = 0
...
/* Merge in any relevant extents from the meta_list */
list_for_each_entry_safe(p, tmp, &info->gfi_meta_list, fmr_list) {
...
// since fsb = 16, considers all metadata which starts before 16 blockno
iter 1: error = ext4_getfsmap_helper(sb, info, p); // p = sb (0,1), nop
info->gfi_next_fsblk = 1
iter 2: error = ext4_getfsmap_helper(sb, info, p); // p = gdt (1,2), nop
info->gfi_next_fsblk = 2
iter 3: error = ext4_getfsmap_helper(sb, info, p); // p = blk bitmap (2,3), nop
info->gfi_next_fsblk = 3
iter 4: error = ext4_getfsmap_helper(sb, info, p); // p = ino bitmap (18,19)
if (rec_blk > info->gfi_next_fsblk) { // (18 > 3)
// emits an extra entry ** BUG **
}
}
Fix this by directly calling ext4_getfsmap_datadev() with a dummy
record that has fmr_physical set to (end_fsb + 1) instead of
last_cluster + 1. By using the block instead of cluster we get the
correct behavior.
Replacing ext4_getfsmap_datadev_helper() with ext4_getfsmap_helper()
is okay since the gfi_lastfree and metadata checks in
ext4_getfsmap_datadev_helper() are anyways redundant when we only want
to emit the last allocated block of the range, as we have already
taken care of emitting metadata and any last free blocks.
Cc: stable@kernel.org
Reported-by: Disha Goel <disgoel@linux.ibm.com>
Fixes: 4a622e4d477b ("ext4: fix FS_IOC_GETFSMAP handling")
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://patch.msgid.link/e7472c8535c9c5ec10f425f495366864ea12c9da.1754377641.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b4cc4a4077268522e3d0d34de4b2dc144e2330fa upstream.
The check for a fast symlink in the presence of only an
external xattr inode is incorrect. If a fast symlink does
not have an xattr block (i_file_acl == 0), but does have
an external xattr inode that increases inode i_blocks, then
the check for a fast symlink will incorrectly fail and
__ext4_iget()->ext4_ind_check_inode() will report the inode
is corrupt when it "validates" i_data[] on the next read:
# ln -s foo /mnt/tmp/bar
# setfattr -h -n trusted.test \
-v "$(yes | head -n 4000)" /mnt/tmp/bar
# umount /mnt/tmp
# mount /mnt/tmp
# ls -l /mnt/tmp
ls: cannot access '/mnt/tmp/bar': Structure needs cleaning
total 4
? l?????????? ? ? ? ? ? bar
# dmesg | tail -1
EXT4-fs error (device dm-8): __ext4_iget:5098:
inode #24578: block 7303014: comm ls: invalid block
(note that "block 7303014" = 0x6f6f66 = "foo" in LE order).
ext4_inode_is_fast_symlink() should check the superblock
EXT4_FEATURE_INCOMPAT_EA_INODE feature flag, not the inode
EXT4_EA_INODE_FL, since the latter is only set on the xattr
inode itself, and not on the inode that uses this xattr.
Cc: stable@vger.kernel.org
Fixes: fc82228a5e38 ("ext4: support fast symlinks from ext3 file systems")
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Li Dongyang <dongyangli@ddn.com>
Reviewed-by: Alex Zhuravlev <bzzz@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Reviewed-on: https://review.whamcloud.com/59879
Lustre-bug-id: https://jira.whamcloud.com/browse/LU-19121
Link: https://patch.msgid.link/20250717063709.757077-1-adilger@dilger.ca
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f2326fd14a224e4cccbab89e14c52279ff79b7ec upstream.
IMA testing revealed that after an ext4 remount, file accesses triggered
full measurements even without modifications, instead of skipping as
expected when i_version is unchanged.
Debugging showed `SB_I_VERSION` was cleared in reconfigure_super() during
remount due to commit 1ff20307393e ("ext4: unconditionally enable the
i_version counter") removing the fix from commit 960e0ab63b2e ("ext4: fix
i_version handling on remount").
To rectify this, `SB_I_VERSION` is always set for `fc->sb_flags` in
ext4_init_fs_context(), instead of `sb->s_flags` in __ext4_fill_super(),
ensuring it persists across all mounts.
Cc: stable@kernel.org
Fixes: 1ff20307393e ("ext4: unconditionally enable the i_version counter")
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20250703073903.6952-2-libaokun@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c0d41112f1a5828c194b59cca953114bc3776ef2 upstream.
Update the connection tracking logic to handle both IPv4 and IPv6
address families.
Cc: stable@vger.kernel.org
Fixes: e6bb91939740 ("ksmbd: limit repeated connections from clients with the same IP")
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 89bb430f621124af39bb31763c4a8b504c9651e2 upstream.
When ksmbd_conn_releasing(opinfo->conn) returns true,the refcount was not
decremented properly, causing a refcount leak that prevents the count from
reaching zero and the memory from being released.
Cc: stable@vger.kernel.org
Signed-off-by: Ziyan Xu <ziyan@securitygossip.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a3de58b12ce074ec05b8741fa28d62ccb1070468 upstream.
If all the subrequests in an unbuffered write stream fail, the subrequest
collector doesn't update the stream->transferred value and it retains its
initial LONG_MAX value. Unfortunately, if all active streams fail, then we
take the smallest value of { LONG_MAX, LONG_MAX, ... } as the value to set
in wreq->transferred - which is then returned from ->write_iter().
LONG_MAX was chosen as the initial value so that all the streams can be
quickly assessed by taking the smallest value of all stream->transferred -
but this only works if we've set any of them.
Fix this by adding a flag to indicate whether the value in
stream->transferred is valid and checking that when we integrate the
values. stream->transferred can then be initialised to zero.
This was found by running the generic/750 xfstest against cifs with
cache=none. It splices data to the target file. Once (if) it has used up
all the available scratch space, the writes start failing with ENOSPC.
This causes ->write_iter() to fail. However, it was returning
wreq->transferred, i.e. LONG_MAX, rather than an error (because it thought
the amount transferred was non-zero) and iter_file_splice_write() would
then try to clean up that amount of pipe bufferage - leading to an oops
when it overran. The kernel log showed:
CIFS: VFS: Send error in write = -28
followed by:
BUG: kernel NULL pointer dereference, address: 0000000000000008
with:
RIP: 0010:iter_file_splice_write+0x3a4/0x520
do_splice+0x197/0x4e0
or:
RIP: 0010:pipe_buf_release (include/linux/pipe_fs_i.h:282)
iter_file_splice_write (fs/splice.c:755)
Also put a warning check into splice to announce if ->write_iter() returned
that it had written more than it was asked to.
Fixes: 288ace2f57c9 ("netfs: New writeback implementation")
Reported-by: Xiaoli Feng <fengxiaoli0714@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220445
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/915443.1755207950@warthog.procyon.org.uk
cc: Paulo Alcantara <pc@manguebit.org>
cc: Steve French <sfrench@samba.org>
cc: Shyam Prasad N <sprasad@microsoft.com>
cc: netfs@lists.linux.dev
cc: linux-cifs@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
cc: stable@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 57661f28756c59510e31543520b5b8f5e591f384 upstream.
After ext4 supports large folios, the semantics of reserving credits in
pages is no longer applicable. In most scenarios, reserving credits in
extents is sufficient. Therefore, introduce ext4_chunk_trans_extent()
to replace ext4_writepage_trans_blocks(). move_extent_per_page() is the
only remaining location where we are still processing extents in pages.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20250707140814.542883-10-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit bbbf150f3f85619569ac19dc6458cca7c492e715 upstream.
After ext4 supports large folios, reserving journal credits for one
maximum-ordered folio based on the worst case cenario during the
writeback process can easily exceed the maximum transaction credits.
Additionally, reserving journal credits for one page is also no
longer appropriate.
Currently, the folio writeback process can either extend the journal
credits or initiate a new transaction if the currently reserved journal
credits are insufficient. Therefore, it can be modified to reserve
credits for only one extent at the outset. In most cases involving
continuous mapping, these credits are generally adequate, and we may
only need to perform some basic credit expansion. However, in extreme
cases where the block size and folio size differ significantly, or when
the folios are sufficiently discontinuous, it may be necessary to
restart a new transaction and resubmit the folios.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20250707140814.542883-9-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 95ad8ee45cdbc321c135a2db895d48b374ef0f87 upstream.
Now, we reserve journal credits for converting extents in only one page
to written state when the I/O operation is complete. This is
insufficient when large folio is enabled.
Fix this by reserving credits for converting up to one extent per block in
the largest 2MB folio, this calculation should only involve extents index
and leaf blocks, so it should not estimate too many credits.
Fixes: 7ac67301e82f ("ext4: enable large folio for regular file")
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Link: https://patch.msgid.link/20250707140814.542883-8-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6b132759b0fe78e518abafb62190c294100db6d6 upstream.
After mpage_map_and_submit_extent() supports restarting handle if
credits are insufficient during allocating blocks, it is more likely to
exit the current mapping iteration and continue to process the current
processing partially mapped folio again. The existing tracepoints are
not sufficient to track this situation, so enhance the tracepoints to
track the writeback position and the return value before and after
submitting the folios.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20250707140814.542883-7-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e2c4c49dee64ca2f42ad2958cbe1805de96b6732 upstream.
After large folios are supported on ext4, writing back a sufficiently
large and discontinuous folio may consume a significant number of
journal credits, placing considerable strain on the journal. For
example, in a 20GB filesystem with 1K block size and 1MB journal size,
writing back a 2MB folio could require thousands of credits in the
worst-case scenario (when each block is discontinuous and distributed
across different block groups), potentially exceeding the journal size.
This issue can also occur in ext4_write_begin() and ext4_page_mkwrite()
when delalloc is not enabled.
Fix this by ensuring that there are sufficient journal credits before
allocating an extent in mpage_map_one_extent() and
ext4_block_write_begin(). If there are not enough credits, return
-EAGAIN, exit the current mapping loop, restart a new handle and a new
transaction, and allocating blocks on this folio again in the next
iteration.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20250707140814.542883-6-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2bddafea3d0d85ee9ac3cf5ba9a4b2f2d2f50257 upstream.
The block allocation process and error handling in ext4_page_mkwrite()
is complex now. Refactor it by introducing a new helper function,
ext4_block_page_mkwrite(). It will call ext4_block_write_begin() to
allocate blocks instead of directly calling block_page_mkwrite().
Preparing to implement retry logic in a subsequent patch to address
situations where the reserved journal credits are insufficient.
Additionally, this modification will help prevent potential deadlocks
that may occur when waiting for folio writeback while holding the
transaction handle.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20250707140814.542883-5-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ded2d726a3041fce8afd88005cbfe15cd4737702 upstream.
During the process of writing back folios, if
mpage_map_and_submit_extent() exits the extent mapping loop due to an
ENOSPC or ENOMEM error, it may result in stale data or filesystem
inconsistency in environments where the block size is smaller than the
folio size.
When mapping a discontinuous folio in mpage_map_and_submit_extent(),
some buffers may have already be mapped. If we exit the mapping loop
prematurely, the folio data within the mapped range will not be written
back, and the file's disk size will not be updated. Once the transaction
that includes this range of extents is committed, this can lead to stale
data or filesystem inconsistency.
Fix this by submitting the current processing partially mapped folio.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20250707140814.542883-4-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f922c8c2461b022a2efd9914484901fb358a5b2a upstream.
mpage_folio_done() should be a more appropriate place than
mpage_submit_folio() for updating the wbc->nr_to_write after we have
submitted a fully mapped folio. Preparing to make mpage_submit_folio()
allows to submit partially mapped folio that is still under processing.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Link: https://patch.msgid.link/20250707140814.542883-3-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1bfe6354e0975fe89c3d25e81b6546d205556a4b upstream.
Since ext4 supports large folios, processing writebacks in pages is no
longer appropriate, it can be modified to process writebacks in bytes.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20250707140814.542883-2-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2ae826799932ff89409f56636ad3c25578fe7cf5 upstream.
The reproducer uses FAULT_INJECTION to make memory allocation fail, which
causes __filemap_get_folio() to fail, when initializing w_folios[i] in
ocfs2_grab_folios_for_write(), it only returns an error code and the value
of w_folios[i] is the error code, which causes
ocfs2_unlock_and_free_folios() to recycle the invalid w_folios[i] when
releasing folios.
Link: https://lkml.kernel.org/r/20250616013140.3602219-1-lizhi.xu@windriver.com
Reported-by: syzbot+c2ea94ae47cd7e3881ec@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=c2ea94ae47cd7e3881ec
Signed-off-by: Lizhi Xu <lizhi.xu@windriver.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5d94b19f066480addfcdcb5efde66152ad5a7c0e upstream.
The quotacheck doesn't initialize sc->ip.
Cc: stable@vger.kernel.org # v6.8
Fixes: 21d7500929c8a0 ("xfs: improve dquot iteration for scrub")
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Andrey Albershteyn <aalbersh@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4289b494ac553e74e86fed1c66b2bf9530bc1082 upstream.
[BUG]
There is an internal report that balance triggered transaction abort,
with the following call trace:
item 85 key (594509824 169 0) itemoff 12599 itemsize 33
extent refs 1 gen 197740 flags 2
ref#0: tree block backref root 7
item 86 key (594558976 169 0) itemoff 12566 itemsize 33
extent refs 1 gen 197522 flags 2
ref#0: tree block backref root 7
...
BTRFS error (device loop0): extent item not found for insert, bytenr 594526208 num_bytes 16384 parent 449921024 root_objectid 934 owner 1 offset 0
BTRFS error (device loop0): failed to run delayed ref for logical 594526208 num_bytes 16384 type 182 action 1 ref_mod 1: -117
------------[ cut here ]------------
BTRFS: Transaction aborted (error -117)
WARNING: CPU: 1 PID: 6963 at ../fs/btrfs/extent-tree.c:2168 btrfs_run_delayed_refs+0xfa/0x110 [btrfs]
And btrfs check doesn't report anything wrong related to the extent
tree.
[CAUSE]
The cause is a little complex, firstly the extent tree indeed doesn't
have the backref for 594526208.
The extent tree only have the following two backrefs around that bytenr
on-disk:
item 65 key (594509824 METADATA_ITEM 0) itemoff 13880 itemsize 33
refs 1 gen 197740 flags TREE_BLOCK
tree block skinny level 0
(176 0x7) tree block backref root CSUM_TREE
item 66 key (594558976 METADATA_ITEM 0) itemoff 13847 itemsize 33
refs 1 gen 197522 flags TREE_BLOCK
tree block skinny level 0
(176 0x7) tree block backref root CSUM_TREE
But the such missing backref item is not an corruption on disk, as the
offending delayed ref belongs to subvolume 934, and that subvolume is
being dropped:
item 0 key (934 ROOT_ITEM 198229) itemoff 15844 itemsize 439
generation 198229 root_dirid 256 bytenr 10741039104 byte_limit 0 bytes_used 345571328
last_snapshot 198229 flags 0x1000000000001(RDONLY) refs 0
drop_progress key (206324 EXTENT_DATA 2711650304) drop_level 2
level 2 generation_v2 198229
And that offending tree block 594526208 is inside the dropped range of
that subvolume. That explains why there is no backref item for that
bytenr and why btrfs check is not reporting anything wrong.
But this also shows another problem, as btrfs will do all the orphan
subvolume cleanup at a read-write mount.
So half-dropped subvolume should not exist after an RW mount, and
balance itself is also exclusive to subvolume cleanup, meaning we
shouldn't hit a subvolume half-dropped during relocation.
The root cause is, there is no orphan item for this subvolume.
In fact there are 5 subvolumes from around 2021 that have the same
problem.
It looks like the original report has some older kernels running, and
caused those zombie subvolumes.
Thankfully upstream commit 8d488a8c7ba2 ("btrfs: fix subvolume/snapshot
deletion not triggered on mount") has long fixed the bug.
[ENHANCEMENT]
For repairing such old fs, btrfs-progs will be enhanced.
Considering how delayed the problem will show up (at run delayed ref
time) and at that time we have to abort transaction already, it is too
late.
Instead here we reject any half-dropped subvolume for reloc tree at the
earliest time, preventing confusion and extra time wasted on debugging
similar bugs.
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7b632596188e1973c6b3ac1c9f8252f735e1039f upstream.
__qgroup_excl_accounting() uses the qgroup iterator machinery to
update the account of one qgroups usage for all its parent hierarchy,
when we either add or remove a relation and have only exclusive usage.
However, there is a small bug there: we loop with an extra iteration
temporary qgroup called `cur` but never actually refer to that in the
body of the loop. As a result, we redundantly account the same usage to
the first qgroup in the list.
This can be reproduced in the following way:
mkfs.btrfs -f -O squota <dev>
mount <dev> <mnt>
btrfs subvol create <mnt>/sv
dd if=/dev/zero of=<mnt>/sv/f bs=1M count=1
sync
btrfs qgroup create 1/100 <mnt>
btrfs qgroup create 2/200 <mnt>
btrfs qgroup assign 1/100 2/200 <mnt>
btrfs qgroup assign 0/256 1/100 <mnt>
btrfs qgroup show <mnt>
and the broken result is (note the 2MiB on 1/100 and 0Mib on 2/100):
Qgroupid Referenced Exclusive Path
-------- ---------- --------- ----
0/5 16.00KiB 16.00KiB <toplevel>
0/256 1.02MiB 1.02MiB sv
Qgroupid Referenced Exclusive Path
-------- ---------- --------- ----
0/5 16.00KiB 16.00KiB <toplevel>
0/256 1.02MiB 1.02MiB sv
1/100 2.03MiB 2.03MiB 2/100<1 member qgroup>
2/100 0.00B 0.00B <0 member qgroups>
With this fix, which simply re-uses `qgroup` as the iteration variable,
we see the expected result:
Qgroupid Referenced Exclusive Path
-------- ---------- --------- ----
0/5 16.00KiB 16.00KiB <toplevel>
0/256 1.02MiB 1.02MiB sv
Qgroupid Referenced Exclusive Path
-------- ---------- --------- ----
0/5 16.00KiB 16.00KiB <toplevel>
0/256 1.02MiB 1.02MiB sv
1/100 1.02MiB 1.02MiB 2/100<1 member qgroup>
2/100 1.02MiB 1.02MiB <0 member qgroups>
The existing fstests did not exercise two layer inheritance so this bug
was missed. I intend to add that testing there, as well.
Fixes: a0bdc04b0732 ("btrfs: qgroup: use qgroup_iterator in __qgroup_excl_accounting()")
CC: stable@vger.kernel.org # 6.12+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit deaf895212da74635a7f0a420e1ecf8f5eca1fe5 upstream.
Inside nocow_one_range(), if the checksum cloning for data reloc inode
failed, we call btrfs_cleanup_ordered_extents() to cleanup the just
allocated ordered extents.
But unlike extent_clear_unlock_delalloc(),
btrfs_cleanup_ordered_extents() requires a length, not an inclusive end
bytenr.
This can be problematic, as the @end is normally way larger than @len.
This means btrfs_cleanup_ordered_extents() can be called on folios
out of the correct range, and if the out-of-range folio is under
writeback, we can incorrectly clear the ordered flag of the folio, and
trigger the DEBUG_WARN() inside btrfs_writepage_cow_fixup().
Fix the wrong parameter with correct length instead.
Fixes: 94f6c5c17e52 ("btrfs: move ordered extent cleanup to where they are allocated")
CC: stable@vger.kernel.org # 6.15+
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3a931e9b39c7ff8066657042f5f00d3b7e6ad315 upstream.
We call btrfs_zone_finish_one_bg() to zone finish one block group and make
room to activate another block group. Currently, we can choose a metadata
block group as a target. But, as we reserve an active metadata block group,
we no longer want to select a metadata block group. So, skip it in the
loop.
CC: stable@vger.kernel.org # 6.6+
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fc5799986fbca957e2e3c0480027f249951b7bcf upstream.
Currently we only log an error message if we can't find the block group
for a log tree extent buffer when unaccounting it (while freeing a log
tree). A missing block group means something is seriously wrong and we
end up leaking space from the metadata space info. So return -ENOENT in
case we don't find the block group.
CC: stable@vger.kernel.org # 6.12+
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0a32e4f0025a74c70dcab4478e9b29c22f5ecf2f upstream.
If we log a new inode (not persisted in a past transaction) that has 0
links and extents, then log another inode with an higher inode number, we
end up with failing to replay the log tree with -EINVAL. The steps for
this are:
1) create new file A
2) write some data to file A
3) open an fd on file A
4) unlink file A
5) fsync file A using the previously open fd
6) create file B (has higher inode number than file A)
7) fsync file B
8) power fail before current transaction commits
Now when attempting to mount the fs, the log replay will fail with
-ENOENT at replay_one_extent() when attempting to replay the first
extent of file A. The failure comes when trying to open the inode for
file A in the subvolume tree, since it doesn't exist.
Before commit 5f61b961599a ("btrfs: fix inode lookup error handling
during log replay"), the returned error was -EIO instead of -ENOENT,
since we converted any errors when attempting to read an inode during
log replay to -EIO.
The reason for this is that the log replay procedure fails to ignore
the current inode when we are at the stage LOG_WALK_REPLAY_ALL, our
current inode has 0 links and last inode we processed in the previous
stage has a non 0 link count. In other words, the issue is that at
replay_one_extent() we only update wc->ignore_cur_inode if the current
replay stage is LOG_WALK_REPLAY_INODES.
Fix this by updating wc->ignore_cur_inode whenever we find an inode item
regardless of the current replay stage. This is a simple solution and easy
to backport, but later we can do other alternatives like avoid logging
extents or inode items other than the inode item for inodes with a link
count of 0.
The problem with the wc->ignore_cur_inode logic has been around since
commit f2d72f42d5fa ("Btrfs: fix warning when replaying log after fsync
of a tmpfile") but it only became frequent to hit since the more recent
commit 5e85262e542d ("btrfs: fix fsync of files with no hard links not
persisting deletion"), because we stopped skipping inodes with a link
count of 0 when logging, while before the problem would only be triggered
if trying to replay a log tree created with an older kernel which has a
logged inode with 0 links.
A test case for fstests will be submitted soon.
Reported-by: Peter Jung <ptr1337@cachyos.org>
Link: https://lore.kernel.org/linux-btrfs/fce139db-4458-4788-bb97-c29acf6cb1df@cachyos.org/
Reported-by: burneddi <burneddi@protonmail.com>
Link: https://lore.kernel.org/linux-btrfs/lh4W-Lwc0Mbk-QvBhhQyZxf6VbM3E8VtIvU3fPIQgweP_Q1n7wtlUZQc33sYlCKYd-o6rryJQfhHaNAOWWRKxpAXhM8NZPojzsJPyHMf2qY=@protonmail.com/#t
Reported-by: Russell Haley <yumpusamongus@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/598ecc75-eb80-41b3-83c2-f2317fbb9864@gmail.com/
Fixes: f2d72f42d5fa ("Btrfs: fix warning when replaying log after fsync of a tmpfile")
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 005b0a0c24e1628313e951516b675109a92cacfe upstream.
Currently holes are sent as writes full of zeroes, which results in
unnecessarily using disk space at the receiving end and increasing the
stream size.
In some cases we avoid sending writes of zeroes, like during a full
send operation where we just skip writes for holes.
But for some cases we fill previous holes with writes of zeroes too, like
in this scenario:
1) We have a file with a hole in the range [2M, 3M), we snapshot the
subvolume and do a full send. The range [2M, 3M) stays as a hole at
the receiver since we skip sending write commands full of zeroes;
2) We punch a hole for the range [3M, 4M) in our file, so that now it
has a 2M hole in the range [2M, 4M), and snapshot the subvolume.
Now if we do an incremental send, we will send write commands full
of zeroes for the range [2M, 4M), removing the hole for [2M, 3M) at
the receiver.
We could improve cases such as this last one by doing additional
comparisons of file extent items (or their absence) between the parent
and send snapshots, but that's a lot of code to add plus additional CPU
and IO costs.
Since the send stream v2 already has a fallocate command and btrfs-progs
implements a callback to execute fallocate since the send stream v2
support was added to it, update the kernel to use fallocate for punching
holes for V2+ streams.
Test coverage is provided by btrfs/284 which is a version of btrfs/007
that exercises send stream v2 instead of v1, using fsstress with random
operations and fssum to verify file contents.
Link: https://github.com/kdave/btrfs-progs/issues/1001
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c0d013495a80cbb53e2288af7ae0ec4170aafd7c upstream.
If we failed to insert the tree mod log operation, we are not removing the
dirty status from the allocated and dirtied extent buffer before we free
it. Removing the dirty status is needed for several reasons such as to
adjust the fs_info->dirty_metadata_bytes counter and remove the dirty
status from the respective folios. So add the missing call to
btrfs_clear_buffer_dirty().
Fixes: f61aa7ba08ab ("btrfs: do not BUG_ON() on tree mod log failure at insert_new_root()")
CC: stable@vger.kernel.org # 6.6+
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 24e066ded45b8147b79c7455ac43a5bff7b5f378 upstream.
During log replay, at add_inode_ref(), if we have an extref item that
contains multiple extrefs and one of them points to a directory that does
not exist in the subvolume tree, we are supposed to ignore it and process
the remaining extrefs encoded in the extref item, since each extref can
point to a different parent inode. However when that happens we just
return from the function and ignore the remaining extrefs.
The problem has been around since extrefs were introduced, in commit
f186373fef00 ("btrfs: extended inode refs"), but it's hard to hit in
practice because getting extref items encoding multiple extref requires
getting a hash collision when computing the offset of the extref's
key. The offset if computed like this:
key.offset = btrfs_extref_hash(dir_ino, name->name, name->len);
and btrfs_extref_hash() is just a wrapper around crc32c().
Fix this by moving to next iteration of the loop when we don't find
the parent directory that an extref points to.
Fixes: f186373fef00 ("btrfs: extended inode refs")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 08530d6e638427e7e1344bd67bacc03882ba95b9 upstream.
When quotas are disabled qgroup ioctls are supposed to return -ENOTCONN,
but the qgroup create ioctl stopped doing that when it races with a quota
disable operation, returning 0 instead. This change of behaviour happened
in commit 6ed05643ddb1 ("btrfs: create qgroup earlier in snapshot
creation").
The issue happens as follows:
1) Task A enters btrfs_ioctl_qgroup_create(), qgroups are enabled and so
qgroup_enabled() returns true since fs_info->quota_root is not NULL;
2) Task B enters btrfs_ioctl_quota_ctl() -> btrfs_quota_disable() and
disables qgroups, so now fs_info->quota_root is NULL;
3) Task A enters btrfs_create_qgroup() and calls btrfs_qgroup_mode(),
which returns BTRFS_QGROUP_MODE_DISABLED since quotas are disabled,
and then btrfs_create_qgroup() returns 0 to the caller, which makes
the ioctl return 0 instead of -ENOTCONN.
The check for fs_info->quota_root and returning -ENOTCONN if it's NULL
is made only after the call btrfs_qgroup_mode().
Fix this by moving the check for disabled quotas with btrfs_qgroup_mode()
into transaction.c:create_pending_snapshot(), so that we don't abort the
transaction if btrfs_create_qgroup() returns -ENOTCONN and quotas are
disabled.
Fixes: 6ed05643ddb1 ("btrfs: create qgroup earlier in snapshot creation")
CC: stable@vger.kernel.org # 6.12+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
btrfs_uring_encoded_read()
commit ea124ec327086325fc096abf42837dac471ac7ae upstream.
btrfs_uring_encoded_read() returns early with -ENOTTY if the uring_cmd
is issued with IO_URING_F_COMPAT but the kernel doesn't support compat
syscalls. However, this early return bypasses the syscall accounting.
Go to out_acct instead to ensure the syscall is counted.
Fixes: 34310c442e17 ("btrfs: add io_uring command for encoded reads (ENCODED_READ ioctl)")
CC: stable@vger.kernel.org # 6.15+
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1ef94169db0958d6de39f9ea6e063ce887342e2d upstream.
[TEST FAILURE WITH EXPERIMENTAL FEATURES]
When running test case generic/508, the test case will fail with the new
btrfs shutdown support:
generic/508 - output mismatch (see /home/adam/xfstests/results//generic/508.out.bad)
# --- tests/generic/508.out 2022-05-11 11:25:30.806666664 +0930
# +++ /home/adam/xfstests/results//generic/508.out.bad 2025-07-02 14:53:22.401824212 +0930
# @@ -1,2 +1,6 @@
# QA output created by 508
# Silence is golden
# +Before:
# +After : stat.btime = Thu Jan 1 09:30:00 1970
# +Before:
# +After : stat.btime = Wed Jul 2 14:53:22 2025
# ...
# (Run 'diff -u /home/adam/xfstests/tests/generic/508.out /home/adam/xfstests/results//generic/508.out.bad' to see the entire diff)
Ran: generic/508
Failures: generic/508
Failed 1 of 1 tests
Please note that the test case requires shutdown support, thus the test
case will be skipped using the current upstream kernel, as it doesn't
have shutdown ioctl support.
[CAUSE]
The direct cause the 0 time stamp in the log tree:
leaf 30507008 items 2 free space 16057 generation 9 owner TREE_LOG
leaf 30507008 flags 0x1(WRITTEN) backref revision 1
checksum stored e522548d
checksum calced e522548d
fs uuid 57d45451-481e-43e4-aa93-289ad707a3a0
chunk uuid d52bd3fd-5163-4337-98a7-7986993ad398
item 0 key (257 INODE_ITEM 0) itemoff 16123 itemsize 160
generation 9 transid 9 size 0 nbytes 0
block group 0 mode 100644 links 1 uid 0 gid 0 rdev 0
sequence 1 flags 0x0(none)
atime 1751432947.492000000 (2025-07-02 14:39:07)
ctime 1751432947.492000000 (2025-07-02 14:39:07)
mtime 1751432947.492000000 (2025-07-02 14:39:07)
otime 0.0 (1970-01-01 09:30:00) <<<
But the old fs tree has all the correct time stamp:
btrfs-progs v6.12
fs tree key (FS_TREE ROOT_ITEM 0)
leaf 30425088 items 2 free space 16061 generation 5 owner FS_TREE
leaf 30425088 flags 0x1(WRITTEN) backref revision 1
checksum stored 48f6c57e
checksum calced 48f6c57e
fs uuid 57d45451-481e-43e4-aa93-289ad707a3a0
chunk uuid d52bd3fd-5163-4337-98a7-7986993ad398
item 0 key (256 INODE_ITEM 0) itemoff 16123 itemsize 160
generation 3 transid 0 size 0 nbytes 16384
block group 0 mode 40755 links 1 uid 0 gid 0 rdev 0
sequence 0 flags 0x0(none)
atime 1751432947.0 (2025-07-02 14:39:07)
ctime 1751432947.0 (2025-07-02 14:39:07)
mtime 1751432947.0 (2025-07-02 14:39:07)
otime 1751432947.0 (2025-07-02 14:39:07) <<<
The root cause is that fill_inode_item() in tree-log.c is only
populating a/c/m time, not the otime (or btime in statx output).
Part of the reason is that, the vfs inode only has a/c/m time, no native
btime support yet.
[FIX]
Thankfully btrfs has its otime stored in btrfs_inode::i_otime_sec and
btrfs_inode::i_otime_nsec.
So what we really need is just fill the otime time stamp in
fill_inode_item() of tree-log.c
There is another fill_inode_item() in inode.c, which is doing the proper
otime population.
Fixes: 94edf4ae43a5 ("Btrfs: don't bother committing delayed inode updates when fsyncing")
CC: stable@vger.kernel.org
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e1249667750399a48cafcf5945761d39fa584edf upstream.
There's a race between a task disabling quotas and another running the
rescan ioctl that can result in a use-after-free of qgroup records from
the fs_info->qgroup_tree rbtree.
This happens as follows:
1) Task A enters btrfs_ioctl_quota_rescan() -> btrfs_qgroup_rescan();
2) Task B enters btrfs_quota_disable() and calls
btrfs_qgroup_wait_for_completion(), which does nothing because at that
point fs_info->qgroup_rescan_running is false (it wasn't set yet by
task A);
3) Task B calls btrfs_free_qgroup_config() which starts freeing qgroups
from fs_info->qgroup_tree without taking the lock fs_info->qgroup_lock;
4) Task A enters qgroup_rescan_zero_tracking() which starts iterating
the fs_info->qgroup_tree tree while holding fs_info->qgroup_lock,
but task B is freeing qgroup records from that tree without holding
the lock, resulting in a use-after-free.
Fix this by taking fs_info->qgroup_lock at btrfs_free_qgroup_config().
Also at btrfs_qgroup_rescan() don't start the rescan worker if quotas
were already disabled.
Reported-by: cen zhang <zzzccc427@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/CAFRLqsV+cMDETFuzqdKSHk_FDm6tneea45krsHqPD6B3FetLpQ@mail.gmail.com/
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 807d9023e75fc20bfd6dd2ac0408ce4af53f1648 upstream.
If the ssd_spread mount option is enabled, then we run the so called
clustered allocator for data block groups. In practice, this results in
creating a btrfs_free_cluster which caches a block_group and borrows its
free extents for allocation.
Since the introduction of allocation size classes in 6.1, there has been
a bug in the interaction between that feature and ssd_spread.
find_free_extent() has a number of nested loops. The loop going over the
allocation stages, stored in ffe_ctl->loop and managed by
find_free_extent_update_loop(), the loop over the raid levels, and the
loop over all the block_groups in a space_info. The size class feature
relies on the block_group loop to ensure it gets a chance to see a
block_group of a given size class. However, the clustered allocator
uses the cached cluster block_group and breaks that loop. Each call to
do_allocation() will really just go back to the same cached block_group.
Normally, this is OK, as the allocation either succeeds and we don't
want to loop any more or it fails, and we clear the cluster and return
its space to the block_group.
But with size classes, the allocation can succeed, then later fail,
outside of do_allocation() due to size class mismatch. That latter
failure is not properly handled due to the highly complex multi loop
logic. The result is a painful loop where we continue to allocate the
same num_bytes from the cluster in a tight loop until it fails and
releases the cluster and lets us try a new block_group. But by then, we
have skipped great swaths of the available block_groups and are likely
to fail to allocate, looping the outer loop. In pathological cases like
the reproducer below, the cached block_group is often the very last one,
in which case we don't perform this tight bg loop but instead rip
through the ffe stages to LOOP_CHUNK_ALLOC and allocate a chunk, which
is now the last one, and we enter the tight inner loop until an
allocation failure. Then allocation succeeds on the final block_group
and if the next allocation is a size mismatch, the exact same thing
happens again.
Triggering this is as easy as mounting with -o ssd_spread and then
running:
mount -o ssd_spread $dev $mnt
dd if=/dev/zero of=$mnt/big bs=16M count=1 &>/dev/null
dd if=/dev/zero of=$mnt/med bs=4M count=1 &>/dev/null
sync
if you do the two writes + sync in a loop, you can force btrfs to spin
an excessive amount on semi-successful clustered allocations, before
ultimately failing and advancing to the stage where we force a chunk
allocation. This results in 2G of data allocated per iteration, despite
only using ~20M of data. By using a small size classed extent, the inner
loop takes longer and we can spin for longer.
The simplest, shortest term fix to unbreak this is to make the clustered
allocator size_class aware in the dumbest way, where it fails on size
class mismatch. This may hinder the operation of the clustered
allocator, but better hindered than completely broken and terribly
overallocating.
Further re-design improvements are also in the works.
Fixes: 52bb7a2166af ("btrfs: introduce size class to block group allocator")
CC: stable@vger.kernel.org # 6.1+
Reported-by: David Sterba <dsterba@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7ebf381a69421a88265d3c49cd0f007ba7336c9d upstream.
During log replay, at add_inode_ref(), we return -ENOENT if our current
inode isn't found on the subvolume tree or if a parent directory isn't
found. The error comes from btrfs_iget_logging() <- btrfs_iget() <-
btrfs_read_locked_inode().
The single caller of add_inode_ref(), replay_one_buffer(), ignores an
-ENOENT error because it expects that error to mean only that a parent
directory wasn't found and that is ok.
Before commit 5f61b961599a ("btrfs: fix inode lookup error handling during
log replay") we were converting any error when getting a parent directory
to -ENOENT and any error when getting the current inode to -EIO, so our
caller would fail log replay in case we can't find the current inode.
After that commit however in case the current inode is not found we return
-ENOENT to the caller and therefore it ignores the critical fact that the
current inode was not found in the subvolume tree.
Fix this by converting -ENOENT to 0 when we don't find a parent directory,
returning -ENOENT when we don't find the current inode and making the
caller, replay_one_buffer(), not ignore -ENOENT anymore.
Fixes: 5f61b961599a ("btrfs: fix inode lookup error handling during log replay")
CC: stable@vger.kernel.org # 6.16
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
reservations
commit e41c75ca3189341e76e6af64b857c05b68a1d7db upstream.
Before waiting for the rescan worker to finish and flushing reservations,
we clear the BTRFS_FS_QUOTA_ENABLED flag from fs_info. If we fail flushing
reservations we leave with the flag not set which is not correct since
quotas are still enabled - we must set back the flag on error paths, such
as when we fail to start a transaction, except for error paths that abort
a transaction. The reservation flushing happens very early before we do
any operation that actually disables quotas and before we start a
transaction, so set back BTRFS_FS_QUOTA_ENABLED if it fails.
Fixes: af0e2aab3b70 ("btrfs: qgroup: flush reservations during quota disable")
CC: stable@vger.kernel.org # 6.12+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3061801420469610c8fa6080a950e56770773ef1 upstream.
There are some reports of "unable to find chunk map for logical 2147483648
length 16384" error message appears in dmesg. This means some IOs are
occurring after a block group is removed.
When a metadata tree node is cleaned on a zoned setup, we keep that node
still dirty and write it out not to create a write hole. However, this can
make a block group's used bytes == 0 while there is a dirty region left.
Such an unused block group is moved into the unused_bg list and processed
for removal. When the removal succeeds, the block group is removed from the
transaction->dirty_bgs list, so the unused dirty nodes in the block group
are not sent at the transaction commit time. It will be written at some
later time e.g, sync or umount, and causes "unable to find chunk map"
errors.
This can happen relatively easy on SMR whose zone size is 256MB. However,
calling do_zone_finish() on such block group returns -EAGAIN and keep that
block group intact, which is why the issue is hidden until now.
Fixes: afba2bc036b0 ("btrfs: zoned: implement active zone tracking")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 62be7afcc13b2727bdc6a4c91aefed6b452e6ecc upstream.
btrfs_zone_finish() can fail for several reason. If it is -EAGAIN, we need
to try it again later. So, put the block group to the retry list properly.
Failing to do so will keep the removable block group intact until remount
and can causes unnecessary ENOSPC.
Fixes: 74e91b12b115 ("btrfs: zoned: zone finish unused block group")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
