| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
These have no clear purpose. This is effectively a revert of commit
bb7462b6fd64 ("vfs: use helpers for calling f_op->{read,write}_iter()").
The patch was created with the help of a coccinelle script.
Fixes: bb7462b6fd64 ("vfs: use helpers for calling f_op->{read,write}_iter()")
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
generic_copy_file_range() is just a wrapper around splice_file_range(),
which caps the maximum copy length.
The only caller of splice_file_range(), namely __ceph_copy_file_range()
is already ready to cope with short copy.
Move the length capping into splice_file_range() and replace the exported
symbol generic_copy_file_range() with a simple inline helper.
Suggested-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/linux-fsdevel/20231204083849.GC32438@lst.de/
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20231212094440.250945-3-amir73il@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Not sure why some splice helpers return long, maybe historic reasons.
Change them all to return ssize_t to conform to the splice methods and
to the rest of the helpers.
Suggested-by: Christian Brauner <brauner@kernel.org>
Link: https://lore.kernel.org/r/20231208-horchen-helium-d3ec1535ede5@brauner/
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20231212094440.250945-2-amir73il@gmail.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The callers of do_splice_direct() hold file_start_write() on the output
file.
This may cause file permission hooks to be called indirectly on an
overlayfs lower layer, which is on the same filesystem of the output
file and could lead to deadlock with fanotify permission events.
To fix this potential deadlock, move file_start_write() from the callers
into the direct_splice_actor(), so file_start_write() will not be held
while splicing from the input file.
Suggested-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20231128214258.GA2398475@perftesting/
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20231130141624.3338942-3-amir73il@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
In preparation of calling do_splice_direct() without file_start_write()
held, create a new helper splice_file_range(), to be called from context
of ->copy_file_range() methods instead of do_splice_direct().
Currently, the only difference is that splice_file_range() does not take
flags argument and that it asserts that file_start_write() is held, but
we factor out a common helper do_splice_direct_actor() that will be used
later.
Use the new helper from __ceph_copy_file_range(), that was incorrectly
passing to do_splice_direct() the copy flags argument as splice flags.
The value of copy flags in ceph is always 0, so it is a smenatic bug fix.
Move the declaration of both helpers to linux/splice.h.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20231130141624.3338942-2-amir73il@gmail.com
Acked-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
All the callers of ->splice_write(), (e.g. do_splice_direct() and
do_splice()) already check rw_verify_area() for the entire range
and perform all the other checks that are in vfs_write_iter().
Instead of creating another tiny helper for special caller, just
open-code it.
This is needed for fanotify "pre content" events.
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20231122122715.2561213-6-amir73il@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
vfs_splice_read() has a permission hook inside rw_verify_area() and
it is called from splice_file_to_pipe(), which is called from
do_splice() and do_sendfile().
do_sendfile() already has a rw_verify_area() check for the entire range.
do_splice() has a rw_verify_check() for the splice to file case, not for
the splice from file case.
Add the rw_verify_area() check for splice from file case in do_splice()
and use a variant of vfs_splice_read() without rw_verify_area() check
in splice_file_to_pipe() to avoid the redundant rw_verify_area() checks.
This is needed for fanotify "pre content" events.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20231122122715.2561213-5-amir73il@gmail.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
vfs_splice_read() has a permission hook inside rw_verify_area() and
it is called from do_splice_direct() -> splice_direct_to_actor().
The callers of do_splice_direct() (e.g. vfs_copy_file_range()) already
call rw_verify_area() for the entire range, but the other caller of
splice_direct_to_actor() (nfsd) does not.
Add the rw_verify_area() checks in nfsd_splice_read() and use a
variant of vfs_splice_read() without rw_verify_area() check in
splice_direct_to_actor() to avoid the redundant rw_verify_area() checks.
This is needed for fanotify "pre content" events.
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20231122122715.2561213-4-amir73il@gmail.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
All callers of do_splice_direct() have a call to rw_verify_area() for
the entire range that is being copied, e.g. by vfs_copy_file_range() or
do_sendfile() before calling do_splice_direct().
The rw_verify_area() check inside do_splice_direct() is redundant and
is called after sb_start_write(), so it is not "start-write-safe".
Remove this redundant check.
This is needed for fanotify "pre content" events.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20231122122715.2561213-3-amir73il@gmail.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Some swap cleanups from Ma Wupeng ("fix WARN_ON in
add_to_avail_list")
- Peter Xu has a series (mm/gup: Unify hugetlb, speed up thp") which
reduces the special-case code for handling hugetlb pages in GUP. It
also speeds up GUP handling of transparent hugepages.
- Peng Zhang provides some maple tree speedups ("Optimize the fast path
of mas_store()").
- Sergey Senozhatsky has improved te performance of zsmalloc during
compaction (zsmalloc: small compaction improvements").
- Domenico Cerasuolo has developed additional selftest code for zswap
("selftests: cgroup: add zswap test program").
- xu xin has doe some work on KSM's handling of zero pages. These
changes are mainly to enable the user to better understand the
effectiveness of KSM's treatment of zero pages ("ksm: support
tracking KSM-placed zero-pages").
- Jeff Xu has fixes the behaviour of memfd's
MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED sysctl ("mm/memfd: fix sysctl
MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED").
- David Howells has fixed an fscache optimization ("mm, netfs, fscache:
Stop read optimisation when folio removed from pagecache").
- Axel Rasmussen has given userfaultfd the ability to simulate memory
poisoning ("add UFFDIO_POISON to simulate memory poisoning with
UFFD").
- Miaohe Lin has contributed some routine maintenance work on the
memory-failure code ("mm: memory-failure: remove unneeded PageHuge()
check").
- Peng Zhang has contributed some maintenance work on the maple tree
code ("Improve the validation for maple tree and some cleanup").
- Hugh Dickins has optimized the collapsing of shmem or file pages into
THPs ("mm: free retracted page table by RCU").
- Jiaqi Yan has a patch series which permits us to use the healthy
subpages within a hardware poisoned huge page for general purposes
("Improve hugetlbfs read on HWPOISON hugepages").
- Kemeng Shi has done some maintenance work on the pagetable-check code
("Remove unused parameters in page_table_check").
- More folioification work from Matthew Wilcox ("More filesystem folio
conversions for 6.6"), ("Followup folio conversions for zswap"). And
from ZhangPeng ("Convert several functions in page_io.c to use a
folio").
- page_ext cleanups from Kemeng Shi ("minor cleanups for page_ext").
- Baoquan He has converted some architectures to use the
GENERIC_IOREMAP ioremap()/iounmap() code ("mm: ioremap: Convert
architectures to take GENERIC_IOREMAP way").
- Anshuman Khandual has optimized arm64 tlb shootdown ("arm64: support
batched/deferred tlb shootdown during page reclamation/migration").
- Better maple tree lockdep checking from Liam Howlett ("More strict
maple tree lockdep"). Liam also developed some efficiency
improvements ("Reduce preallocations for maple tree").
- Cleanup and optimization to the secondary IOMMU TLB invalidation,
from Alistair Popple ("Invalidate secondary IOMMU TLB on permission
upgrade").
- Ryan Roberts fixes some arm64 MM selftest issues ("selftests/mm fixes
for arm64").
- Kemeng Shi provides some maintenance work on the compaction code
("Two minor cleanups for compaction").
- Some reduction in mmap_lock pressure from Matthew Wilcox ("Handle
most file-backed faults under the VMA lock").
- Aneesh Kumar contributes code to use the vmemmap optimization for DAX
on ppc64, under some circumstances ("Add support for DAX vmemmap
optimization for ppc64").
- page-ext cleanups from Kemeng Shi ("add page_ext_data to get client
data in page_ext"), ("minor cleanups to page_ext header").
- Some zswap cleanups from Johannes Weiner ("mm: zswap: three
cleanups").
- kmsan cleanups from ZhangPeng ("minor cleanups for kmsan").
- VMA handling cleanups from Kefeng Wang ("mm: convert to
vma_is_initial_heap/stack()").
- DAMON feature work from SeongJae Park ("mm/damon/sysfs-schemes:
implement DAMOS tried total bytes file"), ("Extend DAMOS filters for
address ranges and DAMON monitoring targets").
- Compaction work from Kemeng Shi ("Fixes and cleanups to compaction").
- Liam Howlett has improved the maple tree node replacement code
("maple_tree: Change replacement strategy").
- ZhangPeng has a general code cleanup - use the K() macro more widely
("cleanup with helper macro K()").
- Aneesh Kumar brings memmap-on-memory to ppc64 ("Add support for
memmap on memory feature on ppc64").
- pagealloc cleanups from Kemeng Shi ("Two minor cleanups for pcp list
in page_alloc"), ("Two minor cleanups for get pageblock
migratetype").
- Vishal Moola introduces a memory descriptor for page table tracking,
"struct ptdesc" ("Split ptdesc from struct page").
- memfd selftest maintenance work from Aleksa Sarai ("memfd: cleanups
for vm.memfd_noexec").
- MM include file rationalization from Hugh Dickins ("arch: include
asm/cacheflush.h in asm/hugetlb.h").
- THP debug output fixes from Hugh Dickins ("mm,thp: fix sloppy text
output").
- kmemleak improvements from Xiaolei Wang ("mm/kmemleak: use
object_cache instead of kmemleak_initialized").
- More folio-related cleanups from Matthew Wilcox ("Remove _folio_dtor
and _folio_order").
- A VMA locking scalability improvement from Suren Baghdasaryan
("Per-VMA lock support for swap and userfaults").
- pagetable handling cleanups from Matthew Wilcox ("New page table
range API").
- A batch of swap/thp cleanups from David Hildenbrand ("mm/swap: stop
using page->private on tail pages for THP_SWAP + cleanups").
- Cleanups and speedups to the hugetlb fault handling from Matthew
Wilcox ("Change calling convention for ->huge_fault").
- Matthew Wilcox has also done some maintenance work on the MM
subsystem documentation ("Improve mm documentation").
* tag 'mm-stable-2023-08-28-18-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (489 commits)
maple_tree: shrink struct maple_tree
maple_tree: clean up mas_wr_append()
secretmem: convert page_is_secretmem() to folio_is_secretmem()
nios2: fix flush_dcache_page() for usage from irq context
hugetlb: add documentation for vma_kernel_pagesize()
mm: add orphaned kernel-doc to the rst files.
mm: fix clean_record_shared_mapping_range kernel-doc
mm: fix get_mctgt_type() kernel-doc
mm: fix kernel-doc warning from tlb_flush_rmaps()
mm: remove enum page_entry_size
mm: allow ->huge_fault() to be called without the mmap_lock held
mm: move PMD_ORDER to pgtable.h
mm: remove checks for pte_index
memcg: remove duplication detection for mem_cgroup_uncharge_swap
mm/huge_memory: work on folio->swap instead of page->private when splitting folio
mm/swap: inline folio_set_swap_entry() and folio_swap_entry()
mm/swap: use dedicated entry for swap in folio
mm/swap: stop using page->private on tail pages for THP_SWAP
selftests/mm: fix WARNING comparing pointer to 0
selftests: cgroup: fix test_kmem_memcg_deletion kernel mem check
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"This contains the usual miscellaneous features, cleanups, and fixes
for vfs and individual filesystems.
Features:
- Block mode changes on symlinks and rectify our broken semantics
- Report file modifications via fsnotify() for splice
- Allow specifying an explicit timeout for the "rootwait" kernel
command line option. This allows to timeout and reboot instead of
always waiting indefinitely for the root device to show up
- Use synchronous fput for the close system call
Cleanups:
- Get rid of open-coded lockdep workarounds for async io submitters
and replace it all with a single consolidated helper
- Simplify epoll allocation helper
- Convert simple_write_begin and simple_write_end to use a folio
- Convert page_cache_pipe_buf_confirm() to use a folio
- Simplify __range_close to avoid pointless locking
- Disable per-cpu buffer head cache for isolated cpus
- Port ecryptfs to kmap_local_page() api
- Remove redundant initialization of pointer buf in pipe code
- Unexport the d_genocide() function which is only used within core
vfs
- Replace printk(KERN_ERR) and WARN_ON() with WARN()
Fixes:
- Fix various kernel-doc issues
- Fix refcount underflow for eventfds when used as EFD_SEMAPHORE
- Fix a mainly theoretical issue in devpts
- Check the return value of __getblk() in reiserfs
- Fix a racy assert in i_readcount_dec
- Fix integer conversion issues in various functions
- Fix LSM security context handling during automounts that prevented
NFS superblock sharing"
* tag 'v6.6-vfs.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (39 commits)
cachefiles: use kiocb_{start,end}_write() helpers
ovl: use kiocb_{start,end}_write() helpers
aio: use kiocb_{start,end}_write() helpers
io_uring: use kiocb_{start,end}_write() helpers
fs: create kiocb_{start,end}_write() helpers
fs: add kerneldoc to file_{start,end}_write() helpers
io_uring: rename kiocb_end_write() local helper
splice: Convert page_cache_pipe_buf_confirm() to use a folio
libfs: Convert simple_write_begin and simple_write_end to use a folio
fs/dcache: Replace printk and WARN_ON by WARN
fs/pipe: remove redundant initialization of pointer buf
fs: Fix kernel-doc warnings
devpts: Fix kernel-doc warnings
doc: idmappings: fix an error and rephrase a paragraph
init: Add support for rootwait timeout parameter
vfs: fix up the assert in i_readcount_dec
fs: Fix one kernel-doc comment
docs: filesystems: idmappings: clarify from where idmappings are taken
fs/buffer.c: disable per-CPU buffer_head cache for isolated CPUs
vfs, security: Fix automount superblock LSM init problem, preventing NFS sb sharing
...
|
|
Convert buf->page to a folio once instead of five times. There's only
one uptodate bit per folio, not per page, so we lose nothing here.
Signed-off-by: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Message-Id: <20230821141541.2535953-1-willy@infradead.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Patch series "mm, netfs, fscache: Stop read optimisation when folio
removed from pagecache", v7.
This fixes an optimisation in fscache whereby we don't read from the cache
for a particular file until we know that there's data there that we don't
have in the pagecache. The problem is that I'm no longer using PG_fscache
(aka PG_private_2) to indicate that the page is cached and so I don't get
a notification when a cached page is dropped from the pagecache.
The first patch merges some folio_has_private() and
filemap_release_folio() pairs and introduces a helper,
folio_needs_release(), to indicate if a release is required.
The second patch is the actual fix. Following Willy's suggestions[1], it
adds an AS_RELEASE_ALWAYS flag to an address_space that will make
filemap_release_folio() always call ->release_folio(), even if
PG_private/PG_private_2 aren't set. folio_needs_release() is altered to
add a check for this.
This patch (of 2):
Make filemap_release_folio() check folio_has_private(). Then, in most
cases, where a call to folio_has_private() is immediately followed by a
call to filemap_release_folio(), we can get rid of the test in the pair.
There are a couple of sites in mm/vscan.c that this can't so easily be
done. In shrink_folio_list(), there are actually three cases (something
different is done for incompletely invalidated buffers), but
filemap_release_folio() elides two of them.
In shrink_active_list(), we don't have have the folio lock yet, so the
check allows us to avoid locking the page unnecessarily.
A wrapper function to check if a folio needs release is provided for those
places that still need to do it in the mm/ directory. This will acquire
additional parts to the condition in a future patch.
After this, the only remaining caller of folio_has_private() outside of
mm/ is a check in fuse.
Link: https://lkml.kernel.org/r/20230628104852.3391651-1-dhowells@redhat.com
Link: https://lkml.kernel.org/r/20230628104852.3391651-2-dhowells@redhat.com
Reported-by: Rohith Surabattula <rohiths.msft@gmail.com>
Suggested-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Steve French <sfrench@samba.org>
Cc: Shyam Prasad N <nspmangalore@gmail.com>
Cc: Rohith Surabattula <rohiths.msft@gmail.com>
Cc: Dave Wysochanski <dwysocha@redhat.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Xiubo Li <xiubli@redhat.com>
Cc: Jingbo Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
LTP sendfile07 [1], which expects sendfile() to return EAGAIN when
transferring data from regular file to a "full" O_NONBLOCK socket,
started failing after commit 2dc334f1a63a ("splice, net: Use
sendmsg(MSG_SPLICE_PAGES) rather than ->sendpage()").
sendfile() no longer immediately returns, but now blocks.
Removed sock_sendpage() handled this case by setting a MSG_DONTWAIT
flag, fix new splice_to_socket() to do the same for O_NONBLOCK sockets.
[1] https://github.com/linux-test-project/ltp/blob/master/testcases/kernel/syscalls/sendfile/sendfile07.c
Fixes: 2dc334f1a63a ("splice, net: Use sendmsg(MSG_SPLICE_PAGES) rather than ->sendpage()")
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Jan Stancek <jstancek@redhat.com>
Tested-by: Xi Ruoyao <xry111@xry111.site>
Link: https://lore.kernel.org/r/023c0e21e595e00b93903a813bc0bfb9a5d7e368.1690219914.git.jstancek@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Same logic applies here: this can fill up the pipe, and pollers that rely
on getting IN_MODIFY notifications never wake up.
Fixes: 983652c69199 ("splice: report related fsnotify events")
Link: https://lore.kernel.org/linux-fsdevel/jbyihkyk5dtaohdwjyivambb2gffyjs3dodpofafnkkunxq7bu@jngkdxx65pux/t/#u
Link: https://bugs.debian.org/1039488
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Acked-by: Jan Kara <jack@suse.cz>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Message-Id: <10d76dd8c85017ae3cd047c9b9a32e26daefdaa2.1688393619.git.nabijaczleweli@nabijaczleweli.xyz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Same logic applies here: this can fill up the pipe and pollers that rely
on getting IN_MODIFY notifications never wake up.
Fixes: 983652c69199 ("splice: report related fsnotify events")
Link: https://lore.kernel.org/linux-fsdevel/jbyihkyk5dtaohdwjyivambb2gffyjs3dodpofafnkkunxq7bu@jngkdxx65pux/t/#u
Link: https://bugs.debian.org/1039488
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Acked-by: Jan Kara <jack@suse.cz>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Message-Id: <8d9ad5acb9c5c1dd2376a2ff5da6ac3183115389.1688393619.git.nabijaczleweli@nabijaczleweli.xyz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The current behaviour caused an asymmetry where some write APIs
(write, sendfile) would notify the written-to/read-from objects,
but splice wouldn't.
This affected userspace which uses inotify, most notably coreutils
tail -f, to monitor pipes.
If the pipe buffer had been filled by a splice-family function:
* tail wouldn't know and thus wouldn't service the pipe, and
* all writes to the pipe would block because it's full,
thus service was denied.
(For the particular case of tail -f this could be worked around
with ---disable-inotify.)
Fixes: 983652c69199 ("splice: report related fsnotify events")
Link: https://lore.kernel.org/linux-fsdevel/jbyihkyk5dtaohdwjyivambb2gffyjs3dodpofafnkkunxq7bu@jngkdxx65pux/t/#u
Link: https://bugs.debian.org/1039488
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Acked-by: Jan Kara <jack@suse.cz>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Message-Id: <604ec704d933e0e0121d9e107ce914512e045fad.1688393619.git.nabijaczleweli@nabijaczleweli.xyz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking changes from Jakub Kicinski:
"WiFi 7 and sendpage changes are the biggest pieces of work for this
release. The latter will definitely require fixes but I think that we
got it to a reasonable point.
Core:
- Rework the sendpage & splice implementations
Instead of feeding data into sockets page by page extend sendmsg
handlers to support taking a reference on the data, controlled by a
new flag called MSG_SPLICE_PAGES
Rework the handling of unexpected-end-of-file to invoke an
additional callback instead of trying to predict what the right
combination of MORE/NOTLAST flags is
Remove the MSG_SENDPAGE_NOTLAST flag completely
- Implement SCM_PIDFD, a new type of CMSG type analogous to
SCM_CREDENTIALS, but it contains pidfd instead of plain pid
- Enable socket busy polling with CONFIG_RT
- Improve reliability and efficiency of reporting for ref_tracker
- Auto-generate a user space C library for various Netlink families
Protocols:
- Allow TCP to shrink the advertised window when necessary, prevent
sk_rcvbuf auto-tuning from growing the window all the way up to
tcp_rmem[2]
- Use per-VMA locking for "page-flipping" TCP receive zerocopy
- Prepare TCP for device-to-device data transfers, by making sure
that payloads are always attached to skbs as page frags
- Make the backoff time for the first N TCP SYN retransmissions
linear. Exponential backoff is unnecessarily conservative
- Create a new MPTCP getsockopt to retrieve all info
(MPTCP_FULL_INFO)
- Avoid waking up applications using TLS sockets until we have a full
record
- Allow using kernel memory for protocol ioctl callbacks, paving the
way to issuing ioctls over io_uring
- Add nolocalbypass option to VxLAN, forcing packets to be fully
encapsulated even if they are destined for a local IP address
- Make TCPv4 use consistent hash in TIME_WAIT and SYN_RECV. Ensure
in-kernel ECMP implementation (e.g. Open vSwitch) select the same
link for all packets. Support L4 symmetric hashing in Open vSwitch
- PPPoE: make number of hash bits configurable
- Allow DNS to be overwritten by DHCPACK in the in-kernel DHCP client
(ipconfig)
- Add layer 2 miss indication and filtering, allowing higher layers
(e.g. ACL filters) to make forwarding decisions based on whether
packet matched forwarding state in lower devices (bridge)
- Support matching on Connectivity Fault Management (CFM) packets
- Hide the "link becomes ready" IPv6 messages by demoting their
printk level to debug
- HSR: don't enable promiscuous mode if device offloads the proto
- Support active scanning in IEEE 802.15.4
- Continue work on Multi-Link Operation for WiFi 7
BPF:
- Add precision propagation for subprogs and callbacks. This allows
maintaining verification efficiency when subprograms are used, or
in fact passing the verifier at all for complex programs,
especially those using open-coded iterators
- Improve BPF's {g,s}setsockopt() length handling. Previously BPF
assumed the length is always equal to the amount of written data.
But some protos allow passing a NULL buffer to discover what the
output buffer *should* be, without writing anything
- Accept dynptr memory as memory arguments passed to helpers
- Add routing table ID to bpf_fib_lookup BPF helper
- Support O_PATH FDs in BPF_OBJ_PIN and BPF_OBJ_GET commands
- Drop bpf_capable() check in BPF_MAP_FREEZE command (used to mark
maps as read-only)
- Show target_{obj,btf}_id in tracing link fdinfo
- Addition of several new kfuncs (most of the names are
self-explanatory):
- Add a set of new dynptr kfuncs: bpf_dynptr_adjust(),
bpf_dynptr_is_null(), bpf_dynptr_is_rdonly(), bpf_dynptr_size()
and bpf_dynptr_clone().
- bpf_task_under_cgroup()
- bpf_sock_destroy() - force closing sockets
- bpf_cpumask_first_and(), rework bpf_cpumask_any*() kfuncs
Netfilter:
- Relax set/map validation checks in nf_tables. Allow checking
presence of an entry in a map without using the value
- Increase ip_vs_conn_tab_bits range for 64BIT builds
- Allow updating size of a set
- Improve NAT tuple selection when connection is closing
Driver API:
- Integrate netdev with LED subsystem, to allow configuring HW
"offloaded" blinking of LEDs based on link state and activity
(i.e. packets coming in and out)
- Support configuring rate selection pins of SFP modules
- Factor Clause 73 auto-negotiation code out of the drivers, provide
common helper routines
- Add more fool-proof helpers for managing lifetime of MDIO devices
associated with the PCS layer
- Allow drivers to report advanced statistics related to Time Aware
scheduler offload (taprio)
- Allow opting out of VF statistics in link dump, to allow more VFs
to fit into the message
- Split devlink instance and devlink port operations
New hardware / drivers:
- Ethernet:
- Synopsys EMAC4 IP support (stmmac)
- Marvell 88E6361 8 port (5x1GE + 3x2.5GE) switches
- Marvell 88E6250 7 port switches
- Microchip LAN8650/1 Rev.B0 PHYs
- MediaTek MT7981/MT7988 built-in 1GE PHY driver
- WiFi:
- Realtek RTL8192FU, 2.4 GHz, b/g/n mode, 2T2R, 300 Mbps
- Realtek RTL8723DS (SDIO variant)
- Realtek RTL8851BE
- CAN:
- Fintek F81604
Drivers:
- Ethernet NICs:
- Intel (100G, ice):
- support dynamic interrupt allocation
- use meta data match instead of VF MAC addr on slow-path
- nVidia/Mellanox:
- extend link aggregation to handle 4, rather than just 2 ports
- spawn sub-functions without any features by default
- OcteonTX2:
- support HTB (Tx scheduling/QoS) offload
- make RSS hash generation configurable
- support selecting Rx queue using TC filters
- Wangxun (ngbe/txgbe):
- add basic Tx/Rx packet offloads
- add phylink support (SFP/PCS control)
- Freescale/NXP (enetc):
- report TAPRIO packet statistics
- Solarflare/AMD:
- support matching on IP ToS and UDP source port of outer
header
- VxLAN and GENEVE tunnel encapsulation over IPv4 or IPv6
- add devlink dev info support for EF10
- Virtual NICs:
- Microsoft vNIC:
- size the Rx indirection table based on requested
configuration
- support VLAN tagging
- Amazon vNIC:
- try to reuse Rx buffers if not fully consumed, useful for ARM
servers running with 16kB pages
- Google vNIC:
- support TCP segmentation of >64kB frames
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- enable USXGMII (88E6191X)
- Microchip:
- lan966x: add support for Egress Stage 0 ACL engine
- lan966x: support mapping packet priority to internal switch
priority (based on PCP or DSCP)
- Ethernet PHYs:
- Broadcom PHYs:
- support for Wake-on-LAN for BCM54210E/B50212E
- report LPI counter
- Microsemi PHYs: support RGMII delay configuration (VSC85xx)
- Micrel PHYs: receive timestamp in the frame (LAN8841)
- Realtek PHYs: support optional external PHY clock
- Altera TSE PCS: merge the driver into Lynx PCS which it is a
variant of
- CAN: Kvaser PCIEcan:
- support packet timestamping
- WiFi:
- Intel (iwlwifi):
- major update for new firmware and Multi-Link Operation (MLO)
- configuration rework to drop test devices and split the
different families
- support for segmented PNVM images and power tables
- new vendor entries for PPAG (platform antenna gain) feature
- Qualcomm 802.11ax (ath11k):
- Multiple Basic Service Set Identifier (MBSSID) and Enhanced
MBSSID Advertisement (EMA) support in AP mode
- support factory test mode
- RealTek (rtw89):
- add RSSI based antenna diversity
- support U-NII-4 channels on 5 GHz band
- RealTek (rtl8xxxu):
- AP mode support for 8188f
- support USB RX aggregation for the newer chips"
* tag 'net-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1602 commits)
net: scm: introduce and use scm_recv_unix helper
af_unix: Skip SCM_PIDFD if scm->pid is NULL.
net: lan743x: Simplify comparison
netlink: Add __sock_i_ino() for __netlink_diag_dump().
net: dsa: avoid suspicious RCU usage for synced VLAN-aware MAC addresses
Revert "af_unix: Call scm_recv() only after scm_set_cred()."
phylink: ReST-ify the phylink_pcs_neg_mode() kdoc
libceph: Partially revert changes to support MSG_SPLICE_PAGES
net: phy: mscc: fix packet loss due to RGMII delays
net: mana: use vmalloc_array and vcalloc
net: enetc: use vmalloc_array and vcalloc
ionic: use vmalloc_array and vcalloc
pds_core: use vmalloc_array and vcalloc
gve: use vmalloc_array and vcalloc
octeon_ep: use vmalloc_array and vcalloc
net: usb: qmi_wwan: add u-blox 0x1312 composition
perf trace: fix MSG_SPLICE_PAGES build error
ipvlan: Fix return value of ipvlan_queue_xmit()
netfilter: nf_tables: fix underflow in chain reference counter
netfilter: nf_tables: unbind non-anonymous set if rule construction fails
...
|
|
Check for -EFAULT instead of wrapping the check in an ret < 0 block.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20230614140341.521331-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
copy_splice_read calls into ->read_iter to read the data, which already
calls file_accessed.
Fixes: 33b3b041543e ("splice: Add a func to do a splice from an O_DIRECT file without ITER_PIPE")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20230614140341.521331-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
splice_to_socket() assumes that a pipe_buffer won't hold more than a single
page of data - but this assumption can be violated by skb_splice_bits()
when it splices from a socket into a pipe.
The problem is that splice_to_socket() doesn't advance the pipe_buffer
length and offset when transcribing from the pipe buf into a bio_vec, so if
the buf is >PAGE_SIZE, it keeps repeating the same initial chunk and
doesn't advance the tail index. It then subtracts this from "remain" and
overcounts the amount of data to be sent.
The cleanup phase then tries to overclean the pipe, hits an unused pipe buf
and a NULL-pointer dereference occurs.
Fix this by not restricting the bio_vec size to PAGE_SIZE and instead
transcribing the entirety of each pipe_buffer into a single bio_vec and
advancing the tail index if remain hasn't hit zero yet.
Large bio_vecs will then be split up by iterator functions such as
iov_iter_extract_pages().
This resulted in a KASAN report looking like:
general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
...
RIP: 0010:pipe_buf_release include/linux/pipe_fs_i.h:203 [inline]
RIP: 0010:splice_to_socket+0xa91/0xe30 fs/splice.c:933
Fixes: 2dc334f1a63a ("splice, net: Use sendmsg(MSG_SPLICE_PAGES) rather than ->sendpage()")
Reported-by: syzbot+f9e28a23426ac3b24f20@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/0000000000000900e905fdeb8e39@google.com/
Tested-by: syzbot+f9e28a23426ac3b24f20@syzkaller.appspotmail.com
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
cc: David Ahern <dsahern@kernel.org>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
cc: Christian Brauner <brauner@kernel.org>
cc: Alexander Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/r/1428985.1686737388@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
splice_direct_to_actor() doesn't manage SPLICE_F_MORE correctly[1] - and,
as a result, it incorrectly signals/fails to signal MSG_MORE when splicing
to a socket. The problem I'm seeing happens when a short splice occurs
because we got a short read due to hitting the EOF on a file: as the length
read (read_len) is less than the remaining size to be spliced (len),
SPLICE_F_MORE (and thus MSG_MORE) is set.
The issue is that, for the moment, we have no way to know *why* the short
read occurred and so can't make a good decision on whether we *should* keep
MSG_MORE set.
MSG_SENDPAGE_NOTLAST was added to work around this, but that is also set
incorrectly under some circumstances - for example if a short read fills a
single pipe_buffer, but the next read would return more (seqfile can do
this).
This was observed with the multi_chunk_sendfile tests in the tls kselftest
program. Some of those tests would hang and time out when the last chunk
of file was less than the sendfile request size:
build/kselftest/net/tls -r tls.12_aes_gcm.multi_chunk_sendfile
This has been observed before[2] and worked around in AF_TLS[3].
Fix this by making splice_direct_to_actor() always signal SPLICE_F_MORE if
we haven't yet hit the requested operation size. SPLICE_F_MORE remains
signalled if the user passed it in to splice() but otherwise gets cleared
when we've read sufficient data to fulfill the request.
If, however, we get a premature EOF from ->splice_read(), have sent at
least one byte and SPLICE_F_MORE was not set by the caller, ->splice_eof()
will be invoked.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Linus Torvalds <torvalds@linux-foundation.org>
cc: Jens Axboe <axboe@kernel.dk>
cc: Christoph Hellwig <hch@lst.de>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: Matthew Wilcox <willy@infradead.org>
cc: Jan Kara <jack@suse.cz>
cc: Jeff Layton <jlayton@kernel.org>
cc: David Hildenbrand <david@redhat.com>
cc: Christian Brauner <brauner@kernel.org>
cc: Chuck Lever <chuck.lever@oracle.com>
cc: Boris Pismenny <borisp@nvidia.com>
cc: John Fastabend <john.fastabend@gmail.com>
cc: linux-mm@kvack.org
Link: https://lore.kernel.org/r/499791.1685485603@warthog.procyon.org.uk/ [1]
Link: https://lore.kernel.org/r/1591392508-14592-1-git-send-email-pooja.trivedi@stackpath.com/ [2]
Link: https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git/commit/?id=d452d48b9f8b1a7f8152d33ef52cfd7fe1735b0a [3]
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add an optional method, ->splice_eof(), to allow splice to indicate the
premature termination of a splice to struct file_operations and struct
proto_ops.
This is called if sendfile() or splice() encounters all of the following
conditions inside splice_direct_to_actor():
(1) the user did not set SPLICE_F_MORE (splice only), and
(2) an EOF condition occurred (->splice_read() returned 0), and
(3) we haven't read enough to fulfill the request (ie. len > 0 still), and
(4) we have already spliced at least one byte.
A further patch will modify the behaviour of SPLICE_F_MORE to always be
passed to the actor if either the user set it or we haven't yet read
sufficient data to fulfill the request.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/CAHk-=wh=V579PDYvkpnTobCLGczbgxpMgGmmhqiTyE34Cpi5Gg@mail.gmail.com/
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
cc: Jens Axboe <axboe@kernel.dk>
cc: Christoph Hellwig <hch@lst.de>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: Matthew Wilcox <willy@infradead.org>
cc: Jan Kara <jack@suse.cz>
cc: Jeff Layton <jlayton@kernel.org>
cc: David Hildenbrand <david@redhat.com>
cc: Christian Brauner <brauner@kernel.org>
cc: Chuck Lever <chuck.lever@oracle.com>
cc: Boris Pismenny <borisp@nvidia.com>
cc: John Fastabend <john.fastabend@gmail.com>
cc: linux-mm@kvack.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Replace generic_splice_sendpage() + splice_from_pipe + pipe_to_sendpage()
with a net-specific handler, splice_to_socket(), that calls sendmsg() with
MSG_SPLICE_PAGES set instead of calling ->sendpage().
MSG_MORE is used to indicate if the sendmsg() is expected to be followed
with more data.
This allows multiple pipe-buffer pages to be passed in a single call in a
BVEC iterator, allowing the processing to be pushed down to a loop in the
protocol driver. This helps pave the way for passing multipage folios down
too.
Protocols that haven't been converted to handle MSG_SPLICE_PAGES yet should
just ignore it and do a normal sendmsg() for now - although that may be a
bit slower as it may copy everything.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Provide kerneldoc comments for filemap_splice_read() and
copy_splice_read().
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Christian Brauner <brauner@kernel.org>
cc: Christoph Hellwig <hch@lst.de>
cc: Jens Axboe <axboe@kernel.dk>
cc: Steve French <smfrench@gmail.com>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: linux-mm@kvack.org
cc: linux-block@vger.kernel.org
cc: linux-cifs@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20230522135018.2742245-32-dhowells@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Remove generic_file_splice_read() as it has been replaced with calls to
filemap_splice_read() and copy_splice_read().
With this, ITER_PIPE is no longer used.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
cc: Jens Axboe <axboe@kernel.dk>
cc: Steve French <smfrench@gmail.com>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: David Hildenbrand <david@redhat.com>
cc: John Hubbard <jhubbard@nvidia.com>
cc: linux-mm@kvack.org
cc: linux-block@vger.kernel.org
cc: linux-cifs@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20230522135018.2742245-30-dhowells@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Make a read splice from a DAX file go directly to copy_splice_read() to do
the reading as filemap_splice_read() is unlikely to find any pagecache to
splice.
I think this affects only erofs, Ext2, Ext4, fuse and XFS.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: Jens Axboe <axboe@kernel.dk>
cc: linux-erofs@lists.ozlabs.org
cc: linux-ext4@vger.kernel.org
cc: linux-xfs@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
cc: linux-block@vger.kernel.org
cc: linux-mm@kvack.org
Link: https://lore.kernel.org/r/20230522135018.2742245-9-dhowells@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Make a read splice from a file descriptor that's open O_DIRECT use
copy_splice_read() to do the reading as filemap_splice_read() is unlikely
to find any pagecache to splice.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: Jens Axboe <axboe@kernel.dk>
cc: linux-fsdevel@vger.kernel.org
cc: linux-block@vger.kernel.org
cc: linux-mm@kvack.org
Link: https://lore.kernel.org/r/20230522135018.2742245-8-dhowells@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Make vfs_splice_read() return immediately if the length is 0.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
cc: Jens Axboe <axboe@kernel.dk>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: linux-block@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
Link: https://lore.kernel.org/r/20230522135018.2742245-7-dhowells@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Rename do_splice_to() to vfs_splice_read() and export it so that it can be
used as a helper when calling down to a lower layer filesystem as it
performs all the necessary checks[1].
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
cc: Miklos Szeredi <miklos@szeredi.hu>
cc: Jens Axboe <axboe@kernel.dk>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: John Hubbard <jhubbard@nvidia.com>
cc: David Hildenbrand <david@redhat.com>
cc: Matthew Wilcox <willy@infradead.org>
cc: linux-unionfs@vger.kernel.org
cc: linux-block@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
Link: https://lore.kernel.org/r/CAJfpeguGksS3sCigmRi9hJdUec8qtM9f+_9jC1rJhsXT+dV01w@mail.gmail.com/ [1]
Link: https://lore.kernel.org/r/20230522135018.2742245-6-dhowells@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Do a couple of cleanups to copy_splice_read():
(1) Cast to struct page **, not void *.
(2) Simplify the calculation of the number of pages to keep/reclaim in
copy_splice_read().
Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
cc: Jens Axboe <axboe@kernel.dk>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: David Hildenbrand <david@redhat.com>
cc: John Hubbard <jhubbard@nvidia.com>
cc: linux-mm@kvack.org
cc: linux-block@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20230522135018.2742245-5-dhowells@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Rename direct_splice_read() to copy_splice_read() to better reflect as to
what it does.
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
cc: Steve French <sfrench@samba.org>
cc: Jens Axboe <axboe@kernel.dk>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: linux-cifs@vger.kernel.org
cc: linux-mm@kvack.org
cc: linux-block@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20230522135018.2742245-4-dhowells@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull nonblocking pipe io_uring support from Jens Axboe:
"Here's the revised edition of the FMODE_NOWAIT support for pipes, in
which we just flag it as such supporting FMODE_NOWAIT unconditionally,
but clear it if we ever end up using splice/vmsplice on the pipe.
The pipe read/write side is perfectly fine for nonblocking IO, however
splice and vmsplice can potentially wait for IO with the pipe lock
held"
* tag 'pipe-nonblock-2023-05-06' of git://git.kernel.dk/linux:
pipe: set FMODE_NOWAIT on pipes
splice: clear FMODE_NOWAIT on file if splice/vmsplice is used
|
|
In preparation for pipes setting FMODE_NOWAIT on pipes to indicate that
RWF_NOWAIT/IOCB_NOWAIT is fully supported, have splice and vmsplice
clear that file flag. Splice holds the pipe lock around IO and cannot
easily be refactored to avoid that, as splice and pipes are inherently
tied together.
By clearing FMODE_NOWAIT if splice is being used on a pipe, other users
of the pipe will know that the pipe is no longer safe for RWF_NOWAIT
and friends.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The fsnotify ACCESS and MODIFY event are missing when manipulating a file
with splice(2).
Signed-off-by: Chung-Chiang Cheng <cccheng@synology.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Acked-by: Jan Kara <jack@suse.cz>
Message-Id: <20230322062519.409752-1-cccheng@synology.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The variable ret belongs to redundant assignment and can be deleted.
fs/splice.c:940:2: warning: Value stored to 'ret' is never read.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=4406
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
|
Pull cifs client updates from Steve French:
"The largest subset of this is from David Howells et al: making the
cifs/smb3 driver pass iov_iters down to the lowest layers, directly to
the network transport rather than passing lists of pages around,
helping multiple areas:
- Pin user pages, thereby fixing the race between concurrent DIO read
and fork, where the pages containing the DIO read buffer may end up
belonging to the child process and not the parent - with the result
that the parent might not see the retrieved data.
- cifs shouldn't take refs on pages extracted from non-user-backed
iterators (eg. KVEC). With these changes, cifs will apply the
appropriate cleanup.
- Making it easier to transition to using folios in cifs rather than
pages by dealing with them through BVEC and XARRAY iterators.
- Allowing cifs to use the new splice function
The remainder are:
- fixes for stable, including various fixes for uninitialized memory,
wrong length field causing mount issue to very old servers,
important directory lease fixes and reconnect fixes
- cleanups (unused code removal, change one element array usage, and
a change form strtobool to kstrtobool, and Kconfig cleanups)
- SMBDIRECT (RDMA) fixes including iov_iter integration and UAF fixes
- reconnect fixes
- multichannel fixes, including improving channel allocation (to
least used channel)
- remove the last use of lock_page_killable by moving to
folio_lock_killable"
* tag '6.3-rc-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: (46 commits)
update internal module version number for cifs.ko
cifs: update ip_addr for ses only for primary chan setup
cifs: use tcon allocation functions even for dummy tcon
cifs: use the least loaded channel for sending requests
cifs: DIO to/from KVEC-type iterators should now work
cifs: Remove unused code
cifs: Build the RDMA SGE list directly from an iterator
cifs: Change the I/O paths to use an iterator rather than a page list
cifs: Add a function to read into an iter from a socket
cifs: Add some helper functions
cifs: Add a function to Hash the contents of an iterator
cifs: Add a function to build an RDMA SGE list from an iterator
netfs: Add a function to extract an iterator into a scatterlist
netfs: Add a function to extract a UBUF or IOVEC into a BVEC iterator
cifs: Implement splice_read to pass down ITER_BVEC not ITER_PIPE
splice: Export filemap/direct_splice_read()
iov_iter: Add a function to extract a page list from an iterator
iov_iter: Define flags to qualify page extraction.
splice: Add a func to do a splice from an O_DIRECT file without ITER_PIPE
splice: Add a func to do a splice from a buffered file without ITER_PIPE
...
|
|
filemap_splice_read() and direct_splice_read() should be exported.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <sfrench@samba.org>
cc: Jens Axboe <axboe@kernel.dk>
cc: Christoph Hellwig <hch@lst.de>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: David Hildenbrand <david@redhat.com>
cc: John Hubbard <jhubbard@nvidia.com>
cc: linux-cifs@vger.kernel.org
cc: linux-mm@kvack.org
cc: linux-block@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Implement a function, direct_file_splice(), that deals with this by using
an ITER_BVEC iterator instead of an ITER_PIPE iterator as the former won't
free its buffers when reverted. The function bulk allocates all the
buffers it thinks it is going to use in advance, does the read
synchronously and only then trims the buffer down. The pages we did use
get pushed into the pipe.
This fixes a problem with the upcoming iov_iter_extract_pages() function,
whereby pages extracted from a non-user-backed iterator such as ITER_PIPE
aren't pinned. __iomap_dio_rw(), however, calls iov_iter_revert() to
shorten the iterator to just the bufferage it is going to use - which has
the side-effect of freeing the excess pipe buffers, even though they're
attached to a bio and may get written to by DMA (thanks to Hillf Danton for
spotting this[1]).
This then causes memory corruption that is particularly noticeable when the
syzbot test[2] is run. The test boils down to:
out = creat(argv[1], 0666);
ftruncate(out, 0x800);
lseek(out, 0x200, SEEK_SET);
in = open(argv[1], O_RDONLY | O_DIRECT | O_NOFOLLOW);
sendfile(out, in, NULL, 0x1dd00);
run repeatedly in parallel. What I think is happening is that ftruncate()
occasionally shortens the DIO read that's about to be made by sendfile's
splice core by reducing i_size.
This should be more efficient for DIO read by virtue of doing a bulk page
allocation, but slightly less efficient by ignoring any partial page in the
pipe.
Reported-by: syzbot+a440341a59e3b7142895@syzkaller.appspotmail.com
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
cc: Christoph Hellwig <hch@lst.de>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: David Hildenbrand <david@redhat.com>
cc: John Hubbard <jhubbard@nvidia.com>
cc: linux-mm@kvack.org
cc: linux-block@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20230207094731.1390-1-hdanton@sina.com/ [1]
Link: https://lore.kernel.org/r/000000000000b0b3c005f3a09383@google.com/ [2]
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Use the bvec_set_page helper to initialize a bvec.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230203150634.3199647-18-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
READ/WRITE proved to be actively confusing - the meanings are
"data destination, as used with read(2)" and "data source, as
used with write(2)", but people keep interpreting those as
"we read data from it" and "we write data to it", i.e. exactly
the wrong way.
Call them ITER_DEST and ITER_SOURCE - at least that is harder
to misinterpret...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
... and untangle the cleanup on failure to add into pipe.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Use pipe_discard_from() explicitly in generic_file_read_iter(); don't bother
with rather non-obvious use of iov_iter_advance() in there.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
The original direct splicing mechanism from Jens required the input to
be a regular file because it was avoiding the special socket case. It
also recognized blkdevs as being close enough to a regular file. But it
forgot about chardevs, which behave the same way and work fine here.
This is an okayish heuristic, but it doesn't totally work. For example,
a few chardevs should be spliceable here. And a few regular files
shouldn't. This patch fixes this by instead checking whether FMODE_LSEEK
is set, which represents decently enough what we need rewinding for when
splicing to internal pipes.
Fixes: b92ce5589374 ("[PATCH] splice: add direct fd <-> fd splicing support")
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Add kernel-doc and return the number of pages removed in order to
get the statistics right in __invalidate_mapping_pages().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
|
|
This saves a lot of calls to compound_head().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
|
|
Pull core block updates from Jens Axboe:
"Another nice round of removing more code than what is added, mostly
due to Christoph's relentless pursuit of tech debt removal/cleanups.
This pull request contains:
- Two series of BFQ improvements (Paolo, Jan, Jia)
- Block iov_iter improvements (Pavel)
- bsg error path fix (Pan)
- blk-mq scheduler improvements (Jan)
- -EBUSY discard fix (Jan)
- bvec allocation improvements (Ming, Christoph)
- bio allocation and init improvements (Christoph)
- Store bdev pointer in bio instead of gendisk + partno (Christoph)
- Block trace point cleanups (Christoph)
- hard read-only vs read-only split (Christoph)
- Block based swap cleanups (Christoph)
- Zoned write granularity support (Damien)
- Various fixes/tweaks (Chunguang, Guoqing, Lei, Lukas, Huhai)"
* tag 'for-5.12/block-2021-02-17' of git://git.kernel.dk/linux-block: (104 commits)
mm: simplify swapdev_block
sd_zbc: clear zone resources for non-zoned case
block: introduce blk_queue_clear_zone_settings()
zonefs: use zone write granularity as block size
block: introduce zone_write_granularity limit
block: use blk_queue_set_zoned in add_partition()
nullb: use blk_queue_set_zoned() to setup zoned devices
nvme: cleanup zone information initialization
block: document zone_append_max_bytes attribute
block: use bi_max_vecs to find the bvec pool
md/raid10: remove dead code in reshape_request
block: mark the bio as cloned in bio_iov_bvec_set
block: set BIO_NO_PAGE_REF in bio_iov_bvec_set
block: remove a layer of indentation in bio_iov_iter_get_pages
block: turn the nr_iovecs argument to bio_alloc* into an unsigned short
block: remove the 1 and 4 vec bvec_slabs entries
block: streamline bvec_alloc
block: factor out a bvec_alloc_gfp helper
block: move struct biovec_slab to bio.c
block: reuse BIO_INLINE_VECS for integrity bvecs
...
|
|
no point going through the intermediate pipe
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Both callers have the identical logics limiting the amount of
data we try to read into pipe - no more than would fit into
that pipe. Move that into do_splice_to() itself.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
