| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
When netfslib asks cifs to issue a read operation, it prefaces this with a
call to ->clamp_length() which cifs uses to negotiate credits, providing
receive capacity on the server; however, in the event that a read op needs
reissuing, netfslib doesn't call ->clamp_length() again as that could
shorten the subrequest, leaving a gap.
This causes the retried read to be done with zero credits which causes the
server to reject it with STATUS_INVALID_PARAMETER. This is a problem for a
DIO read that is requested that would go over the EOF. The short read will
be retried, causing EINVAL to be returned to the user when it fails.
Fix this by making cifs_req_issue_read() negotiate new credits if retrying
(NETFS_SREQ_RETRYING now gets set in the read side as well as the write
side in this instance).
This isn't sufficient, however: the new credits might not be sufficient to
complete the remainder of the read, so also add an additional field,
rreq->actual_len, that holds the actual size of the op we want to perform
without having to alter subreq->len.
We then rely on repeated short reads being retried until we finish the read
or reach the end of file and make a zero-length read.
Also fix a couple of places where the subrequest start and length need to
be altered by the amount so far transferred when being used.
Fixes: 69c3c023af25 ("cifs: Implement netfslib hooks")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <sfrench@samba.org>
cc: Paulo Alcantara <pc@manguebit.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
For debugging an umount failure in xfstests generic/043 generic/044 in some
configurations, we needed more information on the shutdown ioctl which
was suspected of being related to the cause, so tracepoints are added
in this patch e.g.
"trace-cmd record -e smb3_shutdown_enter -e smb3_shutdown_done -e smb3_shutdown_err"
Sample output:
godown-47084 [011] ..... 3313.756965: smb3_shutdown_enter: flags=0x1 tid=0x733b3e75
godown-47084 [011] ..... 3313.756968: smb3_shutdown_done: flags=0x1 tid=0x733b3e75
Tested-by: Anthony Nandaa (Microsoft) <profnandaa@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
There are cases where services need to remount (or change their
credentials files) when keys have expired, but it can be helpful
to have a dynamic trace point to make it easier to notify the
service to refresh the storage account key.
Here is sample output, one from mount with bad password, one
from a reconnect where the password has been changed or expired
and reconnect fails (requiring remount with new storage account key)
TASK-PID CPU# ||||| TIMESTAMP FUNCTION
| | | ||||| | |
mount.cifs-11362 [000] ..... 6000.241620: smb3_key_expired:
rc=-13 user=testpassu conn_id=0x2 server=localhost addr=127.0.0.1:445
kworker/4:0-8458 [004] ..... 6044.892283: smb3_key_expired:
rc=-13 user=testpassu conn_id=0x3 server=localhost addr=127.0.0.1:445
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Add more dynamic tracepoints to help debug copy_file_range (copychunk)
and clone_range ("duplicate extents"). These are tracepoints for
entering the function and completing without error. For example:
"trace-cmd record -e smb3_copychunk_enter -e smb3_copychunk_done"
or
"trace-cmd record -e smb3_clone_enter -e smb3_clone_done"
Here is sample output:
TASK-PID CPU# ||||| TIMESTAMP FUNCTION
| | | ||||| | |
cp-5964 [005] ..... 2176.168977: smb3_clone_enter:
xid=17 sid=0xeb275be4 tid=0x7ffa7cdb source fid=0x1ed02e15
source offset=0x0 target fid=0x1ed02e15 target offset=0x0
len=0xa0000
cp-5964 [005] ..... 2176.170668: smb3_clone_done:
xid=17 sid=0xeb275be4 tid=0x7ffa7cdb source fid=0x1ed02e15
source offset=0x0 target fid=0x1ed02e15 target offset=0x0
len=0xa0000
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
There are cases where debugging clone_range ("smb2_duplicate_extents"
function) and in the future copy_range ("smb2_copychunk_range") can
be helpful. Add dynamic trace points for any errors in clone, and
a followon patch will add them for copychunk.
"trace-cmd record -e smb3_clone_err"
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Add a tracepoint to track the credit changes and server in_flight value
involved in the lifetime of a R/W request, logging it against the
request/subreq debugging ID. This requires the debugging IDs to be
recorded in the cifs_credits struct.
The tracepoint can be enabled with:
echo 1 >/sys/kernel/debug/tracing/events/cifs/smb3_rw_credits/enable
Also add a three-state flag to struct cifs_credits to note if we're
interested in determining when the in_flight contribution ends and, if so,
to track whether we've decremented the contribution yet.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
With the rework of how the __string() handles dynamic strings where it
saves off the source string in field in the helper structure[1], the
assignment of that value to the trace event field is stored in the helper
value and does not need to be passed in again.
This means that with:
__string(field, mystring)
Which use to be assigned with __assign_str(field, mystring), no longer
needs the second parameter and it is unused. With this, __assign_str()
will now only get a single parameter.
There's over 700 users of __assign_str() and because coccinelle does not
handle the TRACE_EVENT() macro I ended up using the following sed script:
git grep -l __assign_str | while read a ; do
sed -e 's/\(__assign_str([^,]*[^ ,]\) *,[^;]*/\1)/' $a > /tmp/test-file;
mv /tmp/test-file $a;
done
I then searched for __assign_str() that did not end with ';' as those
were multi line assignments that the sed script above would fail to catch.
Note, the same updates will need to be done for:
__assign_str_len()
__assign_rel_str()
__assign_rel_str_len()
I tested this with both an allmodconfig and an allyesconfig (build only for both).
[1] https://lore.kernel.org/linux-trace-kernel/20240222211442.634192653@goodmis.org/
Link: https://lore.kernel.org/linux-trace-kernel/20240516133454.681ba6a0@rorschach.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Christian König <christian.koenig@amd.com> for the amdgpu parts.
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> #for
Acked-by: Rafael J. Wysocki <rafael@kernel.org> # for thermal
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Darrick J. Wong <djwong@kernel.org> # xfs
Tested-by: Guenter Roeck <linux@roeck-us.net>
|
|
Make the cifs filesystem use netfslib to handle reading and writing on
behalf of cifs. The changes include:
(1) Various read_iter/write_iter type functions are turned into wrappers
around netfslib API functions or are pointed directly at those
functions:
cifs_file_direct{,_nobrl}_ops switch to use
netfs_unbuffered_read_iter and netfs_unbuffered_write_iter.
Large pieces of code that will be removed are #if'd out and will be removed
in subsequent patches.
[?] Why does cifs mark the page dirty in the destination buffer of a DIO
read? Should that happen automatically? Does netfs need to do that?
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <sfrench@samba.org>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
|
|
Add tracing for the refcounting/lifecycle of the cifs_tcon struct, marking
different events with different labels and giving each tcon its own debug
ID so that the tracelines corresponding to individual tcons can be
distinguished. This can be enabled with:
echo 1 >/sys/kernel/debug/tracing/events/cifs/smb3_tcon_ref/enable
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: linux-cifs@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Add trace points to help debug mknod and mkfifo:
smb3_mknod_done
smb3_mknod_enter
smb3_mknod_err
Example output:
TASK-PID CPU# ||||| TIMESTAMP FUNCTION
| | | ||||| | |
mkfifo-6163 [003] ..... 960.425558: smb3_mknod_enter: xid=12 sid=0xb55130f6 tid=0x46e6241c path=\fifo1
mkfifo-6163 [003] ..... 960.432719: smb3_mknod_done: xid=12 sid=0xb55130f6 tid=0x46e6241c
Reviewed-by: Bharath SM <bharathsm@microsoft.com>
Reviewed-by: Meetakshi Setiya <msetiya@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
It can be helpful in debugging to know which ioctls are called to better
correlate them with smb3 fsctls (and opens). Add a dynamic trace point
to trace ioctls into cifs.ko
Here is sample output:
TASK-PID CPU# ||||| TIMESTAMP FUNCTION
| | | ||||| | |
new-inotify-ioc-90418 [001] ..... 142157.397024: smb3_ioctl: xid=18 fid=0x0 ioctl cmd=0xc009cf0b
new-inotify-ioc-90457 [007] ..... 142217.943569: smb3_ioctl: xid=22 fid=0x389bf5b6 ioctl cmd=0xc009cf0b
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Add a new command to smb2_compound_op() for querying WSL extended
attributes from reparse points.
Signed-off-by: Paulo Alcantara <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Reduce number of roundtrips to server when querying reparse points in
->query_path_info() by sending a single compound request of
create+get_reparse+get_info+close.
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Add support for creating special files (e.g. char/block devices,
sockets, fifos) via NFS reparse points on SMB2+, which are fully
supported by most SMB servers and documented in MS-FSCC.
smb2_get_reparse_inode() creates the file with a corresponding reparse
point buffer set in @iov through a single roundtrip to the server.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311260746.HOJ039BV-lkp@intel.com/
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
smb3_smbd_connect_done and smb3_smbd_connect_err
To improve debugging of RDMA issues add those two. We already
had dynamic tracepoints for non-RDMA connect done and error cases.
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
In debugging a recent performance problem with statfs, it would have
been helpful to be able to trace the smb3 query fs info request
more narrowly. Add a trace point "smb3_qfs_done"
Which displays:
stat-68950 [008] ..... 1472.360598: smb3_qfs_done: xid=14 sid=0xaa9765e4 tid=0x95a76f54 unc_name=\\localhost\test rc=0
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
It is perfectly valid to not find session not found errors
when a reconnect of a session happens when requests for the
same session are happening in parallel.
We had these log messages as VFS logs. My last change dumped
these logs as FYI logs.
This change just creates a new dynamic tracepoint to capture
events of this type, just in case it is useful while
debugging issues in the future.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Move CIFS/SMB3 related client and server files (cifs.ko and ksmbd.ko
and helper modules) to new fs/smb subdirectory:
fs/cifs --> fs/smb/client
fs/ksmbd --> fs/smb/server
fs/smbfs_common --> fs/smb/common
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
