| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
We have decoupled vfs_listxattr() from IOP_XATTR. Instead we just need
to check whether inode->i_op->listxattr is implemented.
Cc: linux-unionfs@vger.kernel.org
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
|
Remove struct posix_acl_{access,default}_handler for all filesystems
that don't depend on the xattr handler in their inode->i_op->listxattr()
method in any way. There's nothing more to do than to simply remove the
handler. It's been effectively unused ever since we introduced the new
posix acl api.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping
Pull vfs idmapping updates from Christian Brauner:
- Last cycle we introduced the dedicated struct mnt_idmap type for
mount idmapping and the required infrastucture in 256c8aed2b42 ("fs:
introduce dedicated idmap type for mounts"). As promised in last
cycle's pull request message this converts everything to rely on
struct mnt_idmap.
Currently we still pass around the plain namespace that was attached
to a mount. This is in general pretty convenient but it makes it easy
to conflate namespaces that are relevant on the filesystem with
namespaces that are relevant on the mount level. Especially for
non-vfs developers without detailed knowledge in this area this was a
potential source for bugs.
This finishes the conversion. Instead of passing the plain namespace
around this updates all places that currently take a pointer to a
mnt_userns with a pointer to struct mnt_idmap.
Now that the conversion is done all helpers down to the really
low-level helpers only accept a struct mnt_idmap argument instead of
two namespace arguments.
Conflating mount and other idmappings will now cause the compiler to
complain loudly thus eliminating the possibility of any bugs. This
makes it impossible for filesystem developers to mix up mount and
filesystem idmappings as they are two distinct types and require
distinct helpers that cannot be used interchangeably.
Everything associated with struct mnt_idmap is moved into a single
separate file. With that change no code can poke around in struct
mnt_idmap. It can only be interacted with through dedicated helpers.
That means all filesystems are and all of the vfs is completely
oblivious to the actual implementation of idmappings.
We are now also able to extend struct mnt_idmap as we see fit. For
example, we can decouple it completely from namespaces for users that
don't require or don't want to use them at all. We can also extend
the concept of idmappings so we can cover filesystem specific
requirements.
In combination with the vfs{g,u}id_t work we finished in v6.2 this
makes this feature substantially more robust and thus difficult to
implement wrong by a given filesystem and also protects the vfs.
- Enable idmapped mounts for tmpfs and fulfill a longstanding request.
A long-standing request from users had been to make it possible to
create idmapped mounts for tmpfs. For example, to share the host's
tmpfs mount between multiple sandboxes. This is a prerequisite for
some advanced Kubernetes cases. Systemd also has a range of use-cases
to increase service isolation. And there are more users of this.
However, with all of the other work going on this was way down on the
priority list but luckily someone other than ourselves picked this
up.
As usual the patch is tiny as all the infrastructure work had been
done multiple kernel releases ago. In addition to all the tests that
we already have I requested that Rodrigo add a dedicated tmpfs
testsuite for idmapped mounts to xfstests. It is to be included into
xfstests during the v6.3 development cycle. This should add a slew of
additional tests.
* tag 'fs.idmapped.v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping: (26 commits)
shmem: support idmapped mounts for tmpfs
fs: move mnt_idmap
fs: port vfs{g,u}id helpers to mnt_idmap
fs: port fs{g,u}id helpers to mnt_idmap
fs: port i_{g,u}id_into_vfs{g,u}id() to mnt_idmap
fs: port i_{g,u}id_{needs_}update() to mnt_idmap
quota: port to mnt_idmap
fs: port privilege checking helpers to mnt_idmap
fs: port inode_owner_or_capable() to mnt_idmap
fs: port inode_init_owner() to mnt_idmap
fs: port acl to mnt_idmap
fs: port xattr to mnt_idmap
fs: port ->permission() to pass mnt_idmap
fs: port ->fileattr_set() to pass mnt_idmap
fs: port ->set_acl() to pass mnt_idmap
fs: port ->get_acl() to pass mnt_idmap
fs: port ->tmpfile() to pass mnt_idmap
fs: port ->rename() to pass mnt_idmap
fs: port ->mknod() to pass mnt_idmap
fs: port ->mkdir() to pass mnt_idmap
...
|
|
If st_uid/st_gid doesn't have a mapping in the mounter's user_ns, then
copy-up should fail, just like it would fail if the mounter task was doing
the copy using "cp -a".
There's a corner case where the "cp -a" would succeed but copy up fail: if
there's a mapping of the invalid uid/gid (65534 by default) in the user
namespace. This is because stat(2) will return this value if the mapping
doesn't exist in the current user_ns and "cp -a" will in turn be able to
create a file with this uid/gid.
This behavior would be inconsistent with POSIX ACL's, which return -1 for
invalid uid/gid which result in a failed copy.
For consistency and simplicity fail the copy of the st_uid/st_gid are
invalid.
Fixes: 459c7c565ac3 ("ovl: unprivieged mounts")
Cc: <stable@vger.kernel.org> # v5.11
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Seth Forshee <sforshee@kernel.org>
|
|
Missed an error cleanup.
Reported-by: syzbot+fd749a7ea127a84e0ffd@syzkaller.appspotmail.com
Fixes: 2b1a77461f16 ("ovl: use vfs_tmpfile_open() helper")
Cc: <stable@vger.kernel.org> # v6.1
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Convert to struct mnt_idmap.
Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
|
Convert to struct mnt_idmap.
Remove legacy file_mnt_user_ns() and mnt_user_ns().
Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
|
Convert to struct mnt_idmap.
Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
|
Convert to struct mnt_idmap.
Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
|
Convert to struct mnt_idmap.
Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
|
Convert to struct mnt_idmap.
Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
|
Convert to struct mnt_idmap.
Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
|
Convert to struct mnt_idmap.
Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
|
Convert to struct mnt_idmap.
Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
|
Convert to struct mnt_idmap.
Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
|
Convert to struct mnt_idmap.
Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
|
Convert to struct mnt_idmap.
Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
|
Convert to struct mnt_idmap.
Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
|
Convert to struct mnt_idmap.
Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
|
Convert to struct mnt_idmap.
Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
|
Convert to struct mnt_idmap.
Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
|
Convert to struct mnt_idmap.
Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
|
Convert to struct mnt_idmap.
Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs
Pull overlayfs update from Miklos Szeredi:
- Fix a couple of bugs found by syzbot
- Don't ingore some open flags set by fcntl(F_SETFL)
- Fix failure to create a hard link in certain cases
- Use type safe helpers for some mnt_userns transformations
- Improve performance of mount
- Misc cleanups
* tag 'ovl-update-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: Kconfig: Fix spelling mistake "undelying" -> "underlying"
ovl: use inode instead of dentry where possible
ovl: Add comment on upperredirect reassignment
ovl: use plain list filler in indexdir and workdir cleanup
ovl: do not reconnect upper index records in ovl_indexdir_cleanup()
ovl: fix comment typos
ovl: port to vfs{g,u}id_t and associated helpers
ovl: Use ovl mounter's fsuid and fsgid in ovl_link()
ovl: Use "buf" flexible array for memcpy() destination
ovl: update ->f_iocb_flags when ovl_change_flags() modifies ->f_flags
ovl: fix use inode directly in rcu-walk mode
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping
Pull vfsuid updates from Christian Brauner:
"Last cycle we introduced the vfs{g,u}id_t types and associated helpers
to gain type safety when dealing with idmapped mounts. That initial
work already converted a lot of places over but there were still some
left,
This converts all remaining places that still make use of non-type
safe idmapping helpers to rely on the new type safe vfs{g,u}id based
helpers.
Afterwards it removes all the old non-type safe helpers"
* tag 'fs.vfsuid.conversion.v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping:
fs: remove unused idmapping helpers
ovl: port to vfs{g,u}id_t and associated helpers
fuse: port to vfs{g,u}id_t and associated helpers
ima: use type safe idmapping helpers
apparmor: use type safe idmapping helpers
caps: use type safe idmapping helpers
fs: use type safe idmapping helpers
mnt_idmapping: add missing helpers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping
Pull setgid inheritance updates from Christian Brauner:
"This contains the work to make setgid inheritance consistent between
modifying a file and when changing ownership or mode as this has been
a repeated source of very subtle bugs. The gist is that we perform the
same permission checks in the write path as we do in the ownership and
mode changing paths after this series where we're currently doing
different things.
We've already made setgid inheritance a lot more consistent and
reliable in the last releases by moving setgid stripping from the
individual filesystems up into the vfs. This aims to make the logic
even more consistent and easier to understand and also to fix
long-standing overlayfs setgid inheritance bugs. Miklos was nice
enough to just let me carry the trivial overlayfs patches from Amir
too.
Below is a more detailed explanation how the current difference in
setgid handling lead to very subtle bugs exemplified via overlayfs
which is a victim of the current rules. I hope this explains why I
think taking the regression risk here is worth it.
A long while ago I found a few setgid inheritance bugs in overlayfs in
the write path in certain conditions. Amir recently picked this back
up in [1] and I jumped on board to fix this more generally.
On the surface all that overlayfs would need to fix setgid inheritance
would be to call file_remove_privs() or file_modified() but actually
that isn't enough because the setgid inheritance api is wildly
inconsistent in that area.
Before this pr setgid stripping in file_remove_privs()'s old
should_remove_suid() helper was inconsistent with other parts of the
vfs. Specifically, it only raises ATTR_KILL_SGID if the inode is
S_ISGID and S_IXGRP but not if the inode isn't in the caller's groups
and the caller isn't privileged over the inode although we require
this already in setattr_prepare() and setattr_copy() and so all
filesystem implement this requirement implicitly because they have to
use setattr_{prepare,copy}() anyway.
But the inconsistency shows up in setgid stripping bugs for overlayfs
in xfstests (e.g., generic/673, generic/683, generic/685, generic/686,
generic/687). For example, we test whether suid and setgid stripping
works correctly when performing various write-like operations as an
unprivileged user (fallocate, reflink, write, etc.):
echo "Test 1 - qa_user, non-exec file $verb"
setup_testfile
chmod a+rws $junk_file
commit_and_check "$qa_user" "$verb" 64k 64k
The test basically creates a file with 6666 permissions. While the
file has the S_ISUID and S_ISGID bits set it does not have the S_IXGRP
set.
On a regular filesystem like xfs what will happen is:
sys_fallocate()
-> vfs_fallocate()
-> xfs_file_fallocate()
-> file_modified()
-> __file_remove_privs()
-> dentry_needs_remove_privs()
-> should_remove_suid()
-> __remove_privs()
newattrs.ia_valid = ATTR_FORCE | kill;
-> notify_change()
-> setattr_copy()
In should_remove_suid() we can see that ATTR_KILL_SUID is raised
unconditionally because the file in the test has S_ISUID set.
But we also see that ATTR_KILL_SGID won't be set because while the
file is S_ISGID it is not S_IXGRP (see above) which is a condition for
ATTR_KILL_SGID being raised.
So by the time we call notify_change() we have attr->ia_valid set to
ATTR_KILL_SUID | ATTR_FORCE.
Now notify_change() sees that ATTR_KILL_SUID is set and does:
ia_valid = attr->ia_valid |= ATTR_MODE
attr->ia_mode = (inode->i_mode & ~S_ISUID);
which means that when we call setattr_copy() later we will definitely
update inode->i_mode. Note that attr->ia_mode still contains S_ISGID.
Now we call into the filesystem's ->setattr() inode operation which
will end up calling setattr_copy(). Since ATTR_MODE is set we will
hit:
if (ia_valid & ATTR_MODE) {
umode_t mode = attr->ia_mode;
vfsgid_t vfsgid = i_gid_into_vfsgid(mnt_userns, inode);
if (!vfsgid_in_group_p(vfsgid) &&
!capable_wrt_inode_uidgid(mnt_userns, inode, CAP_FSETID))
mode &= ~S_ISGID;
inode->i_mode = mode;
}
and since the caller in the test is neither capable nor in the group
of the inode the S_ISGID bit is stripped.
But assume the file isn't suid then ATTR_KILL_SUID won't be raised
which has the consequence that neither the setgid nor the suid bits
are stripped even though it should be stripped because the inode isn't
in the caller's groups and the caller isn't privileged over the inode.
If overlayfs is in the mix things become a bit more complicated and
the bug shows up more clearly.
When e.g., ovl_setattr() is hit from ovl_fallocate()'s call to
file_remove_privs() then ATTR_KILL_SUID and ATTR_KILL_SGID might be
raised but because the check in notify_change() is questioning the
ATTR_KILL_SGID flag again by requiring S_IXGRP for it to be stripped
the S_ISGID bit isn't removed even though it should be stripped:
sys_fallocate()
-> vfs_fallocate()
-> ovl_fallocate()
-> file_remove_privs()
-> dentry_needs_remove_privs()
-> should_remove_suid()
-> __remove_privs()
newattrs.ia_valid = ATTR_FORCE | kill;
-> notify_change()
-> ovl_setattr()
/* TAKE ON MOUNTER'S CREDS */
-> ovl_do_notify_change()
-> notify_change()
/* GIVE UP MOUNTER'S CREDS */
/* TAKE ON MOUNTER'S CREDS */
-> vfs_fallocate()
-> xfs_file_fallocate()
-> file_modified()
-> __file_remove_privs()
-> dentry_needs_remove_privs()
-> should_remove_suid()
-> __remove_privs()
newattrs.ia_valid = attr_force | kill;
-> notify_change()
The fix for all of this is to make file_remove_privs()'s
should_remove_suid() helper perform the same checks as we already
require in setattr_prepare() and setattr_copy() and have
notify_change() not pointlessly requiring S_IXGRP again. It doesn't
make any sense in the first place because the caller must calculate
the flags via should_remove_suid() anyway which would raise
ATTR_KILL_SGID
Note that some xfstests will now fail as these patches will cause the
setgid bit to be lost in certain conditions for unprivileged users
modifying a setgid file when they would've been kept otherwise. I
think this risk is worth taking and I explained and mentioned this
multiple times on the list [2].
Enforcing the rules consistently across write operations and
chmod/chown will lead to losing the setgid bit in cases were it
might've been retained before.
While I've mentioned this a few times but it's worth repeating just to
make sure that this is understood. For the sake of maintainability,
consistency, and security this is a risk worth taking.
If we really see regressions for workloads the fix is to have special
setgid handling in the write path again with different semantics from
chmod/chown and possibly additional duct tape for overlayfs. I'll
update the relevant xfstests with if you should decide to merge this
second setgid cleanup.
Before that people should be aware that there might be failures for
fstests where unprivileged users modify a setgid file"
Link: https://lore.kernel.org/linux-fsdevel/20221003123040.900827-1-amir73il@gmail.com [1]
Link: https://lore.kernel.org/linux-fsdevel/20221122142010.zchf2jz2oymx55qi@wittgenstein [2]
* tag 'fs.ovl.setgid.v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping:
fs: use consistent setgid checks in is_sxid()
ovl: remove privs in ovl_fallocate()
ovl: remove privs in ovl_copyfile()
attr: use consistent sgid stripping checks
attr: add setattr_should_drop_sgid()
fs: move should_remove_suid()
attr: add in_group_or_capable()
|
|
There is a spelling mistake in a Kconfig description. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Passing dentry to some helpers is unnecessary. Simplify these cases.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
If memory for uperredirect was allocated with kstrdup() in upperdir != NULL
and d.redirect != NULL path, it may seem that it can be lost when
upperredirect is reassigned later, but it's not possible.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 0a2d0d3f2f291 ("ovl: Check redirect on index as well")
Signed-off-by: Stanislav Goriainov <goriainov@ispras.ru>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Those two cleanup routines are using the helper ovl_dir_read() with the
merge dir filler, which populates an rb tree, that is never used.
The index dir entry names all have a long (42 bytes) constant prefix, so it
is not surprising that perf top has demostrated high CPU usage by rb tree
population during cleanup of a large index dir:
- 9.53% ovl_fill_merge
- 78.41% ovl_cache_entry_find_link.constprop.27
+ 72.11% strncmp
Use the plain list filler that does not populate the unneeded rb tree.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
ovl_indexdir_cleanup() is called on mount of overayfs with nfs_export
feature to cleanup stale index records for lower and upper files that have
been deleted while overlayfs was offline.
This has the side effect (good or bad) of pre populating inode cache with
all the copied up upper inodes, while verifying the index entries.
For copied up directories, the upper file handles are decoded to conncted
upper dentries. This has the even bigger side effect of reading the
content of all the parent upper directories which may take significantly
more time and IO than just reading the upper inodes.
Do not request connceted upper dentries for verifying upper directory index
entries, because we have no use for the connected dentry.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Fix two typos.
Reported-by: k2ci <kernel-bot@kylinos.cn>
Signed-off-by: Jiangshan Yi <yijiangshan@kylinos.cn>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
A while ago we introduced a dedicated vfs{g,u}id_t type in commit
1e5267cd0895 ("mnt_idmapping: add vfs{g,u}id_t"). We already switched
over a good part of the VFS. Ultimately we will remove all legacy
idmapped mount helpers that operate only on k{g,u}id_t in favor of the
new type safe helpers that operate on vfs{g,u}id_t.
Cc: Seth Forshee (Digital Ocean) <sforshee@kernel.org>
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
There is a wrong case of link() on overlay:
$ mkdir /lower /fuse /merge
$ mount -t fuse /fuse
$ mkdir /fuse/upper /fuse/work
$ mount -t overlay /merge -o lowerdir=/lower,upperdir=/fuse/upper,\
workdir=work
$ touch /merge/file
$ chown bin.bin /merge/file // the file's caller becomes "bin"
$ ln /merge/file /merge/lnkfile
Then we will get an error(EACCES) because fuse daemon checks the link()'s
caller is "bin", it denied this request.
In the changing history of ovl_link(), there are two key commits:
The first is commit bb0d2b8ad296 ("ovl: fix sgid on directory") which
overrides the cred's fsuid/fsgid using the new inode. The new inode's
owner is initialized by inode_init_owner(), and inode->fsuid is
assigned to the current user. So the override fsuid becomes the
current user. We know link() is actually modifying the directory, so
the caller must have the MAY_WRITE permission on the directory. The
current caller may should have this permission. This is acceptable
to use the caller's fsuid.
The second is commit 51f7e52dc943 ("ovl: share inode for hard link")
which removed the inode creation in ovl_link(). This commit move
inode_init_owner() into ovl_create_object(), so the ovl_link() just
give the old inode to ovl_create_or_link(). Then the override fsuid
becomes the old inode's fsuid, neither the caller nor the overlay's
mounter! So this is incorrect.
Fix this bug by using ovl mounter's fsuid/fsgid to do underlying
fs's link().
Link: https://lore.kernel.org/all/20220817102952.xnvesg3a7rbv576x@wittgenstein/T
Link: https://lore.kernel.org/lkml/20220825130552.29587-1-zhangtianci.1997@bytedance.com/t
Signed-off-by: Zhang Tianci <zhangtianci.1997@bytedance.com>
Signed-off-by: Jiachen Zhang <zhangjiachen.jaycee@bytedance.com>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Fixes: 51f7e52dc943 ("ovl: share inode for hard link")
Cc: <stable@vger.kernel.org> # v4.8
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
The "buf" flexible array needs to be the memcpy() destination to avoid
false positive run-time warning from the recent FORTIFY_SOURCE
hardening:
memcpy: detected field-spanning write (size 93) of single field "&fh->fb"
at fs/overlayfs/export.c:799 (size 21)
Reported-by: syzbot+9d14351a171d0d1c7955@syzkaller.appspotmail.com
Link: https://lore.kernel.org/all/000000000000763a6c05e95a5985@google.com/
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
ovl_change_flags() is an open-coded variant of fs/fcntl.c:setfl() and it
got missed by commit 164f4064ca81 ("keep iocb_flags() result cached in
struct file"); the same change applies there.
Reported-by: Pierre Labastie <pierre.labastie@neuf.fr>
Fixes: 164f4064ca81 ("keep iocb_flags() result cached in struct file")
Cc: <stable@vger.kernel.org> # v6.0
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216738
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
ovl_dentry_revalidate_common() can be called in rcu-walk mode. As document
said, "in rcu-walk mode, d_parent and d_inode should not be used without
care".
Check inode here to protect access under rcu-walk mode.
Fixes: bccece1ead36 ("ovl: allow remote upper")
Reported-and-tested-by: syzbot+a4055c78774bbf3498bb@syzkaller.appspotmail.com
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Cc: <stable@vger.kernel.org> # v5.7
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
The current placement of posix_acl_release() in ovl_set_or_remove_acl()
means it can be called on an error pointer instead of actual acls.
Fix this by moving the posix_acl_release() call after the error handling.
Fixes: 0e641857322f ("ovl: implement set acl method") # mainline only
Reported-by: syzbot+3f6ef1c4586bb6fd1f61@syzkaller.appspotmail.com
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
|
A while ago we introduced a dedicated vfs{g,u}id_t type in commit
1e5267cd0895 ("mnt_idmapping: add vfs{g,u}id_t"). We already switched
over a good part of the VFS. Ultimately we will remove all legacy
idmapped mount helpers that operate only on k{g,u}id_t in favor of the
new type safe helpers that operate on vfs{g,u}id_t.
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: Christoph Hellwig <hch@lst.de>
Reviewed-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
|
Now that ovl supports the get and set acl inode operations and the vfs
has been switched to the new posi api, ovl can simply rely on the stub
posix acl handlers. The custom xattr handlers and associated unused
helpers can be removed.
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
|
Now that posix acls have a proper api us it to copy them.
All filesystems that can serve as lower or upper layers for overlayfs
have gained support for the new posix acl api in previous patches.
So switch all internal overlayfs codepaths for copying posix acls to the
new posix acl api.
Acked-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
|
The current way of setting and getting posix acls through the generic
xattr interface is error prone and type unsafe. The vfs needs to
interpret and fixup posix acls before storing or reporting it to
userspace. Various hacks exist to make this work. The code is hard to
understand and difficult to maintain in it's current form. Instead of
making this work by hacking posix acls through xattr handlers we are
building a dedicated posix acl api around the get and set inode
operations. This removes a lot of hackiness and makes the codepaths
easier to maintain. A lot of background can be found in [1].
In order to build a type safe posix api around get and set acl we need
all filesystem to implement get and set acl.
Now that we have added get and set acl inode operations that allow easy
access to the dentry we give overlayfs it's own get and set acl inode
operations.
The set acl inode operation is duplicates most of the ovl posix acl
xattr handler. The main difference being that the set acl inode
operation relies on the new posix acl api. Once the vfs has been
switched over the custom posix acl xattr handler will be removed
completely.
Note, until the vfs has been switched to the new posix acl api this
patch is a non-functional change.
Link: https://lore.kernel.org/all/20220801145520.1532837-1-brauner@kernel.org [1]
Acked-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
|
The current way of setting and getting posix acls through the generic
xattr interface is error prone and type unsafe. The vfs needs to
interpret and fixup posix acls before storing or reporting it to
userspace. Various hacks exist to make this work. The code is hard to
understand and difficult to maintain in it's current form. Instead of
making this work by hacking posix acls through xattr handlers we are
building a dedicated posix acl api around the get and set inode
operations. This removes a lot of hackiness and makes the codepaths
easier to maintain. A lot of background can be found in [1].
In order to build a type safe posix api around get and set acl we need
all filesystem to implement get and set acl.
Now that we have added get and set acl inode operations that allow easy
access to the dentry we give overlayfs it's own get and set acl inode
operations.
Since overlayfs is a stacking filesystem it will use the newly added
posix acl api when retrieving posix acls from the relevant layer.
Since overlayfs can also be mounted on top of idmapped layers. If
idmapped layers are used overlayfs must take the layer's idmapping into
account after it retrieved the posix acls from the relevant layer.
Note, until the vfs has been switched to the new posix acl api this
patch is a non-functional change.
Link: https://lore.kernel.org/all/20220801145520.1532837-1-brauner@kernel.org [1]
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
|
The current way of setting and getting posix acls through the generic
xattr interface is error prone and type unsafe. The vfs needs to
interpret and fixup posix acls before storing or reporting it to
userspace. Various hacks exist to make this work. The code is hard to
understand and difficult to maintain in it's current form. Instead of
making this work by hacking posix acls through xattr handlers we are
building a dedicated posix acl api around the get and set inode
operations. This removes a lot of hackiness and makes the codepaths
easier to maintain. A lot of background can be found in [1].
The current inode operation for getting posix acls takes an inode
argument but various filesystems (e.g., 9p, cifs, overlayfs) need access
to the dentry. In contrast to the ->set_acl() inode operation we cannot
simply extend ->get_acl() to take a dentry argument. The ->get_acl()
inode operation is called from:
acl_permission_check()
-> check_acl()
-> get_acl()
which is part of generic_permission() which in turn is part of
inode_permission(). Both generic_permission() and inode_permission() are
called in the ->permission() handler of various filesystems (e.g.,
overlayfs). So simply passing a dentry argument to ->get_acl() would
amount to also having to pass a dentry argument to ->permission(). We
should avoid this unnecessary change.
So instead of extending the existing inode operation rename it from
->get_acl() to ->get_inode_acl() and add a ->get_acl() method later that
passes a dentry argument and which filesystems that need access to the
dentry can implement instead of ->get_inode_acl(). Filesystems like cifs
which allow setting and getting posix acls but not using them for
permission checking during lookup can simply not implement
->get_inode_acl().
This is intended to be a non-functional change.
Link: https://lore.kernel.org/all/20220801145520.1532837-1-brauner@kernel.org [1]
Suggested-by/Inspired-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
|
Underlying fs doesn't remove privs because fallocate is called with
privileged mounter credentials.
This fixes some failure in fstests generic/683..687.
Fixes: aab8848cee5e ("ovl: add ovl_fallocate()")
Acked-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
|
Underlying fs doesn't remove privs because copy_range/remap_range are
called with privileged mounter credentials.
This fixes some failures in fstest generic/673.
Fixes: 8ede205541ff ("ovl: add reflink/copyfile/dedup support")
Acked-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs tmpfile updates from Al Viro:
"Miklos' ->tmpfile() signature change; pass an unopened struct file to
it, let it open the damn thing. Allows to add tmpfile support to FUSE"
* tag 'pull-tmpfile' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fuse: implement ->tmpfile()
vfs: open inside ->tmpfile()
vfs: move open right after ->tmpfile()
vfs: make vfs_tmpfile() static
ovl: use vfs_tmpfile_open() helper
cachefiles: use vfs_tmpfile_open() helper
cachefiles: only pass inode to *mark_inode_inuse() helpers
cachefiles: tmpfile error handling cleanup
hugetlbfs: cleanup mknod and tmpfile
vfs: add vfs_tmpfile_open() helper
|
|
Pull vfs constification updates from Al Viro:
"whack-a-mole: constifying struct path *"
* tag 'pull-path' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
ecryptfs: constify path
spufs: constify path
nd_jump_link(): constify path
audit_init_parent(): constify path
__io_setxattr(): constify path
do_proc_readlink(): constify path
overlayfs: constify path
fs/notify: constify path
may_linkat(): constify path
do_sys_name_to_handle(): constify path
->getprocattr(): attribute name is const char *, TYVM...
|
|
Pull vfs file updates from Al Viro:
"struct file-related stuff"
* tag 'pull-file' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
dma_buf_getfile(): don't bother with ->f_flags reassignments
Change calling conventions for filldir_t
locks: fix TOCTOU race when granting write lease
|
|
If tmpfile is used for copy up, then use this helper to create the tmpfile
and open it at the same time. This will later allow filesystems such as
fuse to do this operation atomically.
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
