summaryrefslogtreecommitdiff
path: root/fs/ocfs2
AgeCommit message (Collapse)AuthorFilesLines
2016-05-03parallel lookups: actual switch to rwsemAl Viro1-1/+1
ta-da! The main issue is the lack of down_write_killable(), so the places like readdir.c switched to plain inode_lock(); once killable variants of rwsem primitives appear, that'll be dealt with. lockdep side also might need more work Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-05-03ocfs2: don't open-code inode_lock/inode_unlockAl Viro1-2/+2
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-05-03Merge getxattr prototype change into work.lookupsAl Viro3-11/+14
The rest of work.xattr stuff isn't needed for this branch
2016-04-11xattr_handler: pass dentry and inode as separate arguments of ->get()Al Viro1-10/+10
... and do not assume they are already attached to each other Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-04-11don't bother with ->d_inode->i_sb - it's always equal to ->d_sbAl Viro1-1/+1
... and neither can ever be NULL Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-04-04Merge branch 'for_linus' of ↵Linus Torvalds1-2/+9
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull quota fixes from Jan Kara: "Fixes for oopses when the new quotactl gets used with quotas disabled" * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: ocfs2: Fix Q_GETNEXTQUOTA for filesystem without quotas quota: Handle Q_GETNEXTQUOTA when quota is disabled
2016-04-04mm, fs: remove remaining PAGE_CACHE_* and page_cache_{get,release} usageKirill A. Shutemov2-2/+2
Mostly direct substitution with occasional adjustment or removing outdated comments. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-04mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macrosKirill A. Shutemov9-78/+78
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-31posix_acl: Inode acl caching fixesAndreas Gruenbacher1-0/+3
When get_acl() is called for an inode whose ACL is not cached yet, the get_acl inode operation is called to fetch the ACL from the filesystem. The inode operation is responsible for updating the cached acl with set_cached_acl(). This is done without locking at the VFS level, so another task can call set_cached_acl() or forget_cached_acl() before the get_acl inode operation gets to calling set_cached_acl(), and then get_acl's call to set_cached_acl() results in caching an outdate ACL. Prevent this from happening by setting the cached ACL pointer to a task-specific sentinel value before calling the get_acl inode operation. Move the responsibility for updating the cached ACL from the get_acl inode operations to get_acl(). There, only set the cached ACL if the sentinel value hasn't changed. The sentinel values are chosen to have odd values. Likewise, the value of ACL_NOT_CACHED is odd. In contrast, ACL object pointers always have an even value (ACLs are aligned in memory). This allows to distinguish uncached ACLs values from ACL objects. In addition, switch from guarding inode->i_acl and inode->i_default_acl upates by the inode->i_lock spinlock to using xchg() and cmpxchg(). Filesystems that do not want ACLs returned from their get_acl inode operations to be cached must call forget_cached_acl() to prevent the VFS from doing so. (Patch written by Al Viro and Andreas Gruenbacher.) Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-03-29ocfs2: Fix Q_GETNEXTQUOTA for filesystem without quotasJan Kara1-2/+9
When Q_GETNEXTQUOTA was called for filesystem with quotas disabled ocfs2_get_next_id() oopses. Fix the problem by checking early whether the filesystem has quotas enabled. Signed-off-by: Jan Kara <jack@suse.cz>
2016-03-26ocfs2: extend enough credits for freeing one truncate record while replaying ↵Xue jiufei1-11/+8
truncate records Now function ocfs2_replay_truncate_records() first modifies tl_used, then calls ocfs2_extend_trans() to extend transactions for gd and alloc inode used for freeing clusters. jbd2_journal_restart() may be called and it may happen that tl_used in truncate log is decreased but the clusters are not freed, which means these clusters are lost. So we should avoid extending transactions in these two operations. Signed-off-by: joyce.xue <xuejiufei@huawei.com> Reviewed-by: Mark Fasheh <mfasheh@suse.de> Acked-by: Joseph Qi <joseph.qi@huawei.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26ocfs2: extend transaction for ocfs2_remove_rightmost_path() and ↵Xue jiufei1-28/+54
ocfs2_update_edge_lengths() before to avoid inconsistency between inode and et I found that jbd2_journal_restart() is called in some places without keeping things consistently before. However, jbd2_journal_restart() may commit the handle's transaction and restart another one. If the first transaction is committed successfully while another not, it may cause filesystem inconsistency or read only. This is an effort to fix this kind of problems. This patch (of 3): The following functions will be called while truncating an extent: ocfs2_remove_btree_range -> ocfs2_start_trans -> ocfs2_remove_extent -> ocfs2_truncate_rec -> ocfs2_extend_rotate_transaction -> jbd2_journal_restart if jbd2_journal_extend fail -> ocfs2_rotate_tree_left -> ocfs2_remove_rightmost_path -> ocfs2_extend_rotate_transaction -> ocfs2_unlink_subtree -> ocfs2_update_edge_lengths -> ocfs2_extend_trans -> jbd2_journal_restart if jbd2_journal_extend fail -> ocfs2_et_update_clusters -> ocfs2_commit_trans jbd2_journal_restart() may be called and it may happened that the buffers dirtied in ocfs2_truncate_rec() are committed while buffers dirtied in ocfs2_et_update_clusters() are not, the total clusters on extent tree and i_clusters in ocfs2_dinode is inconsistency. So the clusters got from ocfs2_dinode is incorrect, and it also cause read-only problem when call ocfs2_commit_truncate() with the error message: "Inode %llu has empty extent block at %llu". We should extend enough credits for function ocfs2_remove_rightmost_path and ocfs2_update_edge_lengths to avoid this inconsistency. Signed-off-by: joyce.xue <xuejiufei@huawei.com> Acked-by: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26ocfs2/dlm: move lock to the tail of grant queue while doing in-place convertxuejiufei1-0/+6
We have found a bug when two nodes doing umount one after another. 1) Node 1 migrate a lockres that has 3 locks in grant queue such as N2(PR)<->N3(NL)<->N4(PR) to N2. After migration, lvb of the lock N3(NL) and N4(PR) are empty on node 2 because migration target do not copy lvb to these two lock. 2) Node 3 want to convert to PR, it can be granted in __dlmconvert_master(), and the order of these locks is unchanged. The lvb of the lock N3(PR) on node 2 is copyed from lockres in function dlm_update_lvb() while the lvb of lock N4(PR) is still empty. 3) Node 2 want to leave domain, it will migrate this lockres to node 3. Then node 2 will trigger the BUG in dlm_prepare_lvb_for_migration() when adding the lock N4(PR) to mres with the following message because the lvb of mres is already copied from lock N3(PR), but the lvb of lock N4(PR) is empty. "Mismatched lvb in lock cookie=%u:%llu, name=%.*s, node=%u" [akpm@linux-foundation.org: tweak comment] Signed-off-by: xuejiufei <xuejiufei@huawei.com> Acked-by: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26ocfs2: solve a problem of crossing the boundary in updating backupsjiangyiwen1-1/+1
In update_backups() there exists a problem of crossing the boundary as follows: we assume that lun will be resized to 1TB(cluster_size is 32kb), it will include 0~33554431 cluster, in update_backups func, it will backup super block in location of 1TB which is the 33554432th cluster, so the phenomenon of crossing the boundary happens. Signed-off-by: Yiwen Jiang <jiangyiwen@huawei.com> Reviewed-by: Joseph Qi <joseph.qi@huawei.com> Cc: Xue jiufei <xuejiufei@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26ocfs2: fix occurring deadlock by changing ocfs2_wq from global to localjiangyiwen7-33/+32
This patch fixes a deadlock, as follows: Node 1 Node 2 Node 3 1)volume a and b are only mount vol a only mount vol b mounted 2) start to mount b start to mount a 3) check hb of Node 3 check hb of Node 2 in vol a, qs_holds++ in vol b, qs_holds++ 4) -------------------- all nodes' network down -------------------- 5) progress of mount b the same situation as failed, and then call Node 2 ocfs2_dismount_volume. but the process is hung, since there is a work in ocfs2_wq cannot beo completed. This work is about vol a, because ocfs2_wq is global wq. BTW, this work which is scheduled in ocfs2_wq is ocfs2_orphan_scan_work, and the context in this work needs to take inode lock of orphan_dir, because lockres owner are Node 1 and all nodes' nework has been down at the same time, so it can't get the inode lock. 6) Why can't this node be fenced when network disconnected? Because the process of mount is hung what caused qs_holds is not equal 0. Because all works in the ocfs2_wq are relative to the super block. The solution is to change the ocfs2_wq from global to local. In other words, move it into struct ocfs2_super. Signed-off-by: Yiwen Jiang <jiangyiwen@huawei.com> Reviewed-by: Joseph Qi <joseph.qi@huawei.com> Cc: Xue jiufei <xuejiufei@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Cc: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26ocfs2/dlm: fix BUG in dlm_move_lockres_to_recovery_listJoseph Qi2-1/+13
When master handles convert request, it queues ast first and then returns status. This may happen that the ast is sent before the request status because the above two messages are sent by two threads. And right after the ast is sent, if master down, it may trigger BUG in dlm_move_lockres_to_recovery_list in the requested node because ast handler moves it to grant list without clear lock->convert_pending. So remove BUG_ON statement and check if the ast is processed in dlmconvert_remote. Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Reported-by: Yiwen Jiang <jiangyiwen@huawei.com> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Tariq Saeed <tariq.x.saeed@oracle.com> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26ocfs2/dlm: fix race between convert and recoveryJoseph Qi1-1/+10
There is a race window between dlmconvert_remote and dlm_move_lockres_to_recovery_list, which will cause a lock with OCFS2_LOCK_BUSY in grant list, thus system hangs. dlmconvert_remote { spin_lock(&res->spinlock); list_move_tail(&lock->list, &res->converting); lock->convert_pending = 1; spin_unlock(&res->spinlock); status = dlm_send_remote_convert_request(); >>>>>> race window, master has queued ast and return DLM_NORMAL, and then down before sending ast. this node detects master down and calls dlm_move_lockres_to_recovery_list, which will revert the lock to grant list. Then OCFS2_LOCK_BUSY won't be cleared as new master won't send ast any more because it thinks already be authorized. spin_lock(&res->spinlock); lock->convert_pending = 0; if (status != DLM_NORMAL) dlm_revert_pending_convert(res, lock); spin_unlock(&res->spinlock); } In this case, check if res->state has DLM_LOCK_RES_RECOVERING bit set (res is still in recovering) or res master changed (new master has finished recovery), reset the status to DLM_RECOVERING, then it will retry convert. Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Reported-by: Yiwen Jiang <jiangyiwen@huawei.com> Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Tariq Saeed <tariq.x.saeed@oracle.com> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26ocfs2: fix a deadlock issue in ocfs2_dio_end_io_write()Ryan Ding1-4/+8
The code should call ocfs2_free_alloc_context() to free meta_ac & data_ac before calling ocfs2_run_deallocs(). Because ocfs2_run_deallocs() will acquire the system inode's i_mutex hold by meta_ac. So try to release the lock before ocfs2_run_deallocs(). Fixes: af1310367f41 ("ocfs2: fix sparse file & data ordering issue in direct io.") Signed-off-by: Ryan Ding <ryan.ding@oracle.com> Acked-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26ocfs2: fix disk file size and memory file size mismatchRyan Ding1-10/+17
When doing append direct write in an already allocated cluster, and fast path in ocfs2_dio_get_block() is triggered, function ocfs2_dio_end_io_write() will be skipped as there is no context allocated. As a result, the disk file size will not be changed as it should be. The solution is to skip fast path when we are about to change file size. Fixes: af1310367f41 ("ocfs2: fix sparse file & data ordering issue in direct io.") Signed-off-by: Ryan Ding <ryan.ding@oracle.com> Acked-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26ocfs2: take ip_alloc_sem in ocfs2_dio_get_block & ocfs2_dio_end_io_writeRyan Ding1-6/+17
Take ip_alloc_sem to prevent concurrent access to extent tree, which may cause the extent tree in an unstable state. Signed-off-by: Ryan Ding <ryan.ding@oracle.com> Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26ocfs2: fix ip_unaligned_aio deadlock with dio work queueRyan Ding5-36/+9
In the current implementation of unaligned aio+dio, lock order behave as follow: in user process context: -> call io_submit() -> get i_mutex <== window1 -> get ip_unaligned_aio -> submit direct io to block device -> release i_mutex -> io_submit() return in dio work queue context(the work queue is created in __blockdev_direct_IO): -> release ip_unaligned_aio <== window2 -> get i_mutex -> clear unwritten flag & change i_size -> release i_mutex There is a limitation to the thread number of dio work queue. 256 at default. If all 256 thread are in the above 'window2' stage, and there is a user process in the 'window1' stage, the system will became deadlock. Since the user process hold i_mutex to wait ip_unaligned_aio lock, while there is a direct bio hold ip_unaligned_aio mutex who is waiting for a dio work queue thread to be schedule. But all the dio work queue thread is waiting for i_mutex lock in 'window2'. This case only happened in a test which send a large number(more than 256) of aio at one io_submit() call. My design is to remove ip_unaligned_aio lock. Change it to a sync io instead. Just like ip_unaligned_aio lock, serialize the unaligned aio dio. [akpm@linux-foundation.org: remove OCFS2_IOCB_UNALIGNED_IO, per Junxiao Bi] Signed-off-by: Ryan Ding <ryan.ding@oracle.com> Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26ocfs2: code clean up for direct ioRyan Ding2-144/+10
Clean up ocfs2_file_write_iter & ocfs2_prepare_inode_for_write: * remove append dio check: it will be checked in ocfs2_direct_IO() * remove file hole check: file hole is supported for now * remove inline data check: it will be checked in ocfs2_direct_IO() * remove the full_coherence check when append dio: we will get the inode_lock in ocfs2_dio_get_block, there is no need to fall back to buffer io to ensure the coherence semantics. Now the drop dio procedure is gone. :) [akpm@linux-foundation.org: remove unused label] Signed-off-by: Ryan Ding <ryan.ding@oracle.com> Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26ocfs2: fix sparse file & data ordering issue in direct ioRyan Ding1-517/+346
There are mainly three issues in the direct io code path after commit 24c40b329e03 ("ocfs2: implement ocfs2_direct_IO_write"): * Does not support sparse file. * Does not support data ordering. eg: when write to a file hole, it will alloc extent first. If system crashed before io finished, data will corrupt. * Potential risk when doing aio+dio. The -EIOCBQUEUED return value is likely to be ignored by ocfs2_direct_IO_write(). To resolve above problems, re-design direct io code with following ideas: * Use buffer io to fill in holes. And this will make better performance also. * Clear unwritten after direct write finished. So we can make sure meta data changes after data write to disk. (Unwritten extent is invisible to user, from user's view, meta data is not changed when allocate an unwritten extent.) * Clear ocfs2_direct_IO_write(). Do all ending work in end_io. This patch has passed fs,dio,ltp-aiodio.part1,ltp-aiodio.part2,ltp-aiodio.part4 test cases of ltp. For performance improvement, see following test result: ocfs2 cluster size 1MB, ocfs2 volume is mounted on /mnt/. The original way: + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=4K count=1048576 oflag=direct 1048576+0 records in 1048576+0 records out 4294967296 bytes (4.3 GB) copied, 1707.83 s, 2.5 MB/s + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=256K count=16384 oflag=direct 16384+0 records in 16384+0 records out 4294967296 bytes (4.3 GB) copied, 582.705 s, 7.4 MB/s After this patch: + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=4K count=1048576 oflag=direct 1048576+0 records in 1048576+0 records out 4294967296 bytes (4.3 GB) copied, 64.6412 s, 66.4 MB/s + rm /mnt/test.img -f + dd if=/dev/zero of=/mnt/test.img bs=256K count=16384 oflag=direct 16384+0 records in 16384+0 records out 4294967296 bytes (4.3 GB) copied, 34.7611 s, 124 MB/s Signed-off-by: Ryan Ding <ryan.ding@oracle.com> Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26ocfs2: record UNWRITTEN extents when populate write descRyan Ding4-5/+106
To support direct io in ocfs2_write_begin_nolock & ocfs2_write_end_nolock. There is still one issue in the direct write procedure. phase 1: alloc extent with UNWRITTEN flag phase 2: submit direct data to disk, add zero page to page cache phase 3: clear UNWRITTEN flag when data has been written to disk When there are 2 direct write A(0~3KB),B(4~7KB) writing to the same cluster 0~7KB (cluster size 8KB). Write request A arrive phase 2 first, it will zero the region (4~7KB). Before request A enter to phase 3, request B arrive phase 2, it will zero region (0~3KB). This is just like request B steps request A. To resolve this issue, we should let request B knows this cluster is already under zero, to prevent it from steps the previous write request. This patch will add function ocfs2_unwritten_check() to do this job. It will record all clusters that are under direct write(it will be recorded in the 'ip_unwritten_list' member of inode info), and prevent the later direct write writing to the same cluster to do the zero work again. Signed-off-by: Ryan Ding <ryan.ding@oracle.com> Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26ocfs2: return the physical address in ocfs2_write_clusterRyan Ding1-15/+13
To support direct io in ocfs2_write_begin_nolock & ocfs2_write_end_nolock. Direct io needs to get the physical address from write_begin, to map the user page. This patch is to change the arg 'phys' of ocfs2_write_cluster to a pointer, so it can be retrieved to write_begin. And we can retrieve it to the direct io procedure. Signed-off-by: Ryan Ding <ryan.ding@oracle.com> Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26ocfs2: do not change i_size in write_end for direct ioRyan Ding1-33/+46
To support direct io in ocfs2_write_begin_nolock & ocfs2_write_end_nolock. Append direct io do not change i_size in get block phase. It only move to orphan when starting write. After data is written to disk, it will delete itself from orphan and update i_size. So skip i_size change section in write_begin for direct io. And when there is no extents alloc, no meta data changes needed for direct io (since write_begin start trans for 2 reason: alloc extents & change i_size. Now none of them needed). So we can skip start trans procedure. Signed-off-by: Ryan Ding <ryan.ding@oracle.com> Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26ocfs2: test target page before change itRyan Ding1-6/+26
To support direct io in ocfs2_write_begin_nolock & ocfs2_write_end_nolock. Direct io data will not appear in buffer. The w_target_page member will not be filled by direct io. So avoid to use it when it's NULL. Unlinke buffer io and mmap, direct io will call write_begin with more than 1 page a time. So the target_index is not sufficient to describe the actual data. change it to a range start at target_index, end in end_index. Signed-off-by: Ryan Ding <ryan.ding@oracle.com> Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26ocfs2: use c_new to indicate newly allocated extentsRyan Ding1-10/+12
To support direct io in ocfs2_write_begin_nolock & ocfs2_write_end_nolock. There is a problem in ocfs2's direct io implement: if system crashed after extents allocated, and before data return, we will get a extent with dirty data on disk. This problem violate the journal=order semantics, which means meta changes take effect after data written to disk. To resolve this issue, direct write can use the UNWRITTEN flag to describe a extent during direct data writeback. The direct write procedure should act in the following order: phase 1: alloc extent with UNWRITTEN flag phase 2: submit direct data to disk, add zero page to page cache phase 3: clear UNWRITTEN flag when data has been written to disk This patch is to change the 'c_unwritten' member of ocfs2_write_cluster_desc to 'c_clear_unwritten'. Means whether to clear the unwritten flag. It do not care if a extent is allocated or not. And use 'c_new' to specify a newly allocated extent. So the direct io procedure can use c_clear_unwritten to control the UNWRITTEN bit on extent. Signed-off-by: Ryan Ding <ryan.ding@oracle.com> Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26ocfs2: add ocfs2_write_type_t type to identify the caller of writeRyan Ding3-13/+22
Patchset: fix ocfs2 direct io code patch to support sparse file and data ordering semantics The idea is to use buffer io(more precisely use the interface ocfs2_write_begin_nolock & ocfs2_write_end_nolock) to do the zero work beyond block size. And clear UNWRITTEN flag until direct io data has been written to disk, which can prevent data corruption when system crashed during direct write. And we will also archive a better performance: eg. dd direct write new file with block size 4KB: before this patchset: 2.5 MB/s after this patchset: 66.4 MB/s This patch (of 8): To support direct io in ocfs2_write_begin_nolock & ocfs2_write_end_nolock. Remove unused args filp & flags. Add new arg type. The type is one of buffer/direct/mmap. Indicate 3 way to perform write. buffer/mmap type has implemented. direct type will be implemented later. Signed-off-by: Ryan Ding <ryan.ding@oracle.com> Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26ocfs2: o2hb: fix double free bugJunxiao Bi1-2/+2
This is a regression issue and caused the following kernel panic when do ocfs2 multiple test. BUG: unable to handle kernel paging request at 00000002000800c0 IP: [<ffffffff81192978>] kmem_cache_alloc+0x78/0x160 PGD 7bbe5067 PUD 0 Oops: 0000 [#1] SMP Modules linked in: ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi xen_kbdfront xen_netfront xen_fbfront xen_blkfront CPU: 2 PID: 4044 Comm: mpirun Not tainted 4.5.0-rc5-next-20160225 #1 Hardware name: Xen HVM domU, BIOS 4.3.1OVM 05/14/2014 task: ffff88007a521a80 ti: ffff88007aed0000 task.ti: ffff88007aed0000 RIP: 0010:[<ffffffff81192978>] [<ffffffff81192978>] kmem_cache_alloc+0x78/0x160 RSP: 0018:ffff88007aed3a48 EFLAGS: 00010282 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000001991 RDX: 0000000000001990 RSI: 00000000024000c0 RDI: 000000000001b330 RBP: ffff88007aed3a98 R08: ffff88007d29b330 R09: 00000002000800c0 R10: 0000000c51376d87 R11: ffff8800792cac38 R12: ffff88007cc30f00 R13: 00000000024000c0 R14: ffffffff811b053f R15: ffff88007aed3ce7 FS: 0000000000000000(0000) GS:ffff88007d280000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000002000800c0 CR3: 000000007aeb2000 CR4: 00000000000406e0 Call Trace: __d_alloc+0x2f/0x1a0 d_alloc+0x17/0x80 lookup_dcache+0x8a/0xc0 path_openat+0x3c3/0x1210 do_filp_open+0x80/0xe0 do_sys_open+0x110/0x200 SyS_open+0x19/0x20 do_syscall_64+0x72/0x230 entry_SYSCALL64_slow_path+0x25/0x25 Code: 05 e6 77 e7 7e 4d 8b 08 49 8b 40 10 4d 85 c9 0f 84 dd 00 00 00 48 85 c0 0f 84 d4 00 00 00 49 63 44 24 20 49 8b 3c 24 48 8d 4a 01 <49> 8b 1c 01 4c 89 c8 65 48 0f c7 0f 0f 94 c0 3c 01 75 b6 49 63 RIP kmem_cache_alloc+0x78/0x160 CR2: 00000002000800c0 ---[ end trace 823969e602e4aaac ]--- Fixes: a4a1dfa4bb8b("ocfs2/cluster: fix memory leak in o2hb_region_release") Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-23ocfs2: check/fix inode block for online file checkGang He2-9/+218
Implement online check or fix inode block during reading a inode block to memory. Signed-off-by: Gang He <ghe@suse.com> Reviewed-by: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-23ocfs2: create/remove sysfile for online file checkGang He1-0/+5
Create online file check sysfile when ocfs2 mount, remove the related sysfile when ocfs2 umount. Signed-off-by: Gang He <ghe@suse.com> Reviewed-by: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-23ocfs2: sysfile interfaces for online file checkGang He4-1/+660
Implement online file check sysfile interfaces, e.g. how to create the related sysfile according to device name, how to display/handle file check request from the sysfile. Signed-off-by: Gang He <ghe@suse.com> Reviewed-by: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-23ocfs2: export ocfs2_kset for online file checkGang He2-1/+4
When there are errors in the ocfs2 filesystem, they are usually accompanied by the inode number which caused the error. This inode number would be the input to fixing the file. One of these options could be considered: A file in the sys filesytem which would accept inode numbers. This could be used to communication back what has to be fixed or is fixed. You could write: $# echo "<inode>" > /sys/fs/ocfs2/devname/filecheck/check or $# echo "<inode>" > /sys/fs/ocfs2/devname/filecheck/fix Compare with second version, I re-design filecheck sysfs interfaces, there are three sysfs files (check, fix and set) under filecheck directory (see above), sysfs will accept only one argument <inode>. Second, I adjust some code in ocfs2_filecheck_repair_inode_block() function according to upstream feedback, we cannot just add VALID_FL flag back as a inode block fix, then we will not fix this field corruption currently until having a complete solution. Compare with first version, I use strncasecmp instead of double strncmp functions. Second, update the source file contribution vendor. This patch (of 4): Export ocfs2_kset object from ocfs2_stackglue kernel module, then online file check code will create the related sysfiles under ocfs2_kset object. We're exporting this because it's built in ocfs2_stackglue.ko. Signed-off-by: Gang He <ghe@suse.com> Reviewed-by: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-21Merge branch 'for_linus' of ↵Linus Torvalds2-0/+27
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull UDF and quota updates from Jan Kara: "This contains a rewrite of UDF handling of filename encoding to fix remaining overflow issues from Andrew Gabbasov and quota changes to support new Q_[X]GETNEXTQUOTA quotactl for VFS quota formats" * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: quota: Fix possible GPF due to uninitialised pointers ext4: Make Q_GETNEXTQUOTA work for quota in hidden inodes quota: Forbid Q_GETQUOTA and Q_GETNEXTQUOTA for frozen filesystem quota: Fix possible races during quota loading ocfs2: Implement get_next_id() quota_v2: Implement get_next_id() for V2 quota format quota: Add support for ->get_nextdqblk() for VFS quota udf: Merge linux specific translation into CS0 conversion function udf: Remove struct ustr as non-needed intermediate storage udf: Use separate buffer for copying split names udf: Adjust UDF_NAME_LEN to better reflect actual restrictions udf: Join functions for UTF8 and NLS conversions udf: Parameterize output length in udf_put_filename quota: Allow Q_GETQUOTA for frozen filesystem quota: Fixup comments about return value of Q_[X]GETNEXTQUOTA
2016-03-21Merge tag 'xfs-for-linus-4.6-rc1' of ↵Linus Torvalds1-1/+6
git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs Pull xfs updates from Dave Chinner: "There's quite a lot in this request, and there's some cross-over with ext4, dax and quota code due to the nature of the changes being made. As for the rest of the XFS changes, there are lots of little things all over the place, which add up to a lot of changes in the end. The major changes are that we've reduced the size of the struct xfs_inode by ~100 bytes (gives an inode cache footprint reduction of >10%), the writepage code now only does a single set of mapping tree lockups so uses less CPU, delayed allocation reservations won't overrun under random write loads anymore, and we added compile time verification for on-disk structure sizes so we find out when a commit or platform/compiler change breaks the on disk structure as early as possible. Change summary: - error propagation for direct IO failures fixes for both XFS and ext4 - new quota interfaces and XFS implementation for iterating all the quota IDs in the filesystem - locking fixes for real-time device extent allocation - reduction of duplicate information in the xfs and vfs inode, saving roughly 100 bytes of memory per cached inode. - buffer flag cleanup - rework of the writepage code to use the generic write clustering mechanisms - several fixes for inode flag based DAX enablement - rework of remount option parsing - compile time verification of on-disk format structure sizes - delayed allocation reservation overrun fixes - lots of little error handling fixes - small memory leak fixes - enable xfsaild freezing again" * tag 'xfs-for-linus-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: (66 commits) xfs: always set rvalp in xfs_dir2_node_trim_free xfs: ensure committed is initialized in xfs_trans_roll xfs: borrow indirect blocks from freed extent when available xfs: refactor delalloc indlen reservation split into helper xfs: update freeblocks counter after extent deletion xfs: debug mode forced buffered write failure xfs: remove impossible condition xfs: check sizes of XFS on-disk structures at compile time xfs: ioends require logically contiguous file offsets xfs: use named array initializers for log item dumping xfs: fix computation of inode btree maxlevels xfs: reinitialise per-AG structures if geometry changes during recovery xfs: remove xfs_trans_get_block_res xfs: fix up inode32/64 (re)mount handling xfs: fix format specifier , should be %llx and not %llu xfs: sanitize remount options xfs: convert mount option parsing to tokens xfs: fix two memory leaks in xfs_attr_list.c error paths xfs: XFS_DIFLAG2_DAX limited by PAGE_SIZE xfs: dynamically switch modes when XFS_DIFLAG2_DAX is set/cleared ...
2016-03-18Merge tag 'configfs-for-linus' of git://git.infradead.org/users/hch/configfsLinus Torvalds1-17/+5
Pull configfs updates from Christoph Hellwig: - A large patch from me to simplify setting up the list of default groups by actually implementing it as a list instead of an array. - a small Y2083 prep patch from Deepa Dinamani. Probably doesn't matter on it's own, but it seems like he is trying to get rid of all CURRENT_TIME uses in file systems, which is a worthwhile goal. * tag 'configfs-for-linus' of git://git.infradead.org/users/hch/configfs: configfs: switch ->default groups to a linked list configfs: Replace CURRENT_TIME by current_fs_time()
2016-03-16ocfs2/dlm: fix a variable overflow problem in dlmdomain.cJun Piao1-1/+1
In dlm_send_join_cancels(), node is defined with type unsigned int, but initialized with -1, this will lead variable overflow. Although this won't cause any runtime problem, the code looks a little uncoordinated. Signed-off-by: Jun Piao <piaojun@huawei.com> Reviewed-by: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-16ocfs2: fix a tiny race that leads file system read-onlyJiufei Xue4-4/+18
when o2hb detect a node down, it first set the dead node to recovery map and create ocfs2rec which will replay journal for dead node. o2hb thread then call dlm_do_local_recovery_cleanup() to delete the lock for dead node. After the lock of dead node is gone, locks for other nodes can be granted and may modify the meta data without replaying journal of the dead node. The detail is described as follows. N1 N2 N3(master) modify the extent tree of inode, and commit dirty metadata to journal, then goes down. o2hb thread detects N1 goes down, set recovery map and delete the lock of N1. dlm_thread flush ast for the lock of N2. do not detect the death of N1, so recovery map is empty. read inode from disk without replaying the journal of N1 and modify the extent tree of the inode that N1 had modified. ocfs2rec recover the journal of N1. The modification of N2 is lost. The modification of N1 and N2 are not serial, and it will lead to read-only file system. We can set recovery_waiting flag to the lock resource after delete the lock for dead node to prevent other node from getting the lock before dlm recovery. After dlm recovery, the recovery map on N2 is not empty, ocfs2_inode_lock_full_nested() will wait for ocfs2 recovery. Signed-off-by: Jiufei Xue <xuejiufei@huawei.com> Reviewed-by: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-16ocfs2/dlm: return EINVAL when the lockres on migration target is in ↵xuejiufei1-1/+13
DROPPING_REF state If master migrate this lock resource to node when it happened to purge it, a new lock resource will be created and inserted into hash list. If then master goes down, the lock resource being purged is recovered, so there exist two lock resource with different owner. So return error to master if the lock resource is in DROPPING state, master will retry to migrate this lock resource. Signed-off-by: xuejiufei <xuejiufei@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Joseph Qi <joseph.qi@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-16ocfs2/dlm: clear DROPPING_REF flag when the master goes downxuejiufei1-8/+10
If the master goes down after return in-progress for deref message. The lock resource on non-master node can not be purged. Clear the DROPPING_REF flag and recovery it. Signed-off-by: xuejiufei <xuejiufei@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Joseph Qi <joseph.qi@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-16ocfs2/dlm: return in progress if master can not clear the refmap bit right nowxuejiufei3-3/+17
Master returns in-progress to non-master node when it can not clear the refmap bit right now. And non-master node will not purge the lock resource until receiving deref done message. Signed-off-by: xuejiufei <xuejiufei@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Joseph Qi <joseph.qi@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-16ocfs2/dlm: add DEREF_DONE messagexuejiufei3-1/+138
This series of patches is to fix the dis-order issue of setting/clearing refmap bit described below. Node 1 Node 2(master) dlmlock dlm_do_master_request dlm_master_request_handler -> dlm_lockres_set_refmap_bit dlmlock succeed dlmunlock succeed dlm_purge_lockres dlm_deref_handler -> find lock resource is in DLM_LOCK_RES_SETREF_INPROG state, so dispatch a deref work dlm_purge_lockres succeed. call dlmlock again dlm_do_master_request dlm_master_request_handler -> dlm_lockres_set_refmap_bit deref work trigger, call dlm_lockres_clear_refmap_bit to clear Node 1 from refmap dlm_purge_lockres succeed dlm_send_remote_lock_request return DLM_IVLOCKID because the lockres is not exist BUG if the lockres is $RECOVERY This series of patches add a new message to keep the order of set and clear. Other nodes can purge the lock resource only after the refmap bit on master is cleared. This patch is to add DEREF_DONE message and corresponding handler. Node can purge the lock resource after receiving this message. As a new message is added, so increase the minor number of dlm protocol version. Signed-off-by: xuejiufei <xuejiufei@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Joseph Qi <joseph.qi@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-16ocfs2/dlm: fix a typo in dlmcommon.hJoseph Qi1-2/+2
Refer to cluster/tcp.h, NET_MAX_PAYLOAD_BYTES is a typo for O2NET_MAX_PAYLOAD_BYTES. Since currently DLM_MIG_LOCKRES_RESERVED is not actually used, it won't cause any problem. But we'd better correct it for further use. Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-16ocfs2: use spinlock_irqsave() to downconvert lock in ocfs2_osb_dump()jiangyiwen1-2/+3
Commit a75e9ccabd92 ("ocfs2: use spinlock irqsave for downconvert lock") missed an unmodified place in ocfs2_osb_dump(), so it still exists a deadlock scenario. ocfs2_wake_downconvert_thread ocfs2_rw_unlock ocfs2_dio_end_io dio_complete ..... bio_endio req_bio_endio .... scsi_io_completion blk_done_softirq __do_softirq do_softirq irq_exit do_IRQ ocfs2_osb_dump cat /sys/kernel/debug/ocfs2/${uuid}/fs_state This patch still uses spin_lock_irqsave() - replace spin_lock() to solve this situation. Signed-off-by: Yiwen Jiang <jiangyiwen@huawei.com> Reviewed-by: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-16ocfs2/cluster: replace the interrupt safe spinlocks with common onesjiangyiwen1-6/+4
There actually no hardware or software interrupts in the context which using o2hb_live_lock, so we don't need to worry about race conditions caused by irq/softirq with spinlock held. Turning off irq is not good for system performance after all. Just replace them with a non interrupt safe function. Signed-off-by: Yiwen Jiang <jiangyiwen@huawei.com> Reviewed-by: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-10ocfs2: fix return value from ocfs2_page_mkwrite()Jan Kara1-0/+4
ocfs2_page_mkwrite() could mistakenly return error code instead of mkwrite status value. Fix it. Signed-off-by: Jan Kara <jack@suse.cz> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-06configfs: switch ->default groups to a linked listChristoph Hellwig1-17/+5
Replace the current NULL-terminated array of default groups with a linked list. This gets rid of lots of nasty code to size and/or dynamically allocate the array. While we're at it also provide a conveniant helper to remove the default groups. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Felipe Balbi <balbi@kernel.org> [drivers/usb/gadget] Acked-by: Joel Becker <jlbec@evilplan.org> Acked-by: Nicholas Bellinger <nab@linux-iscsi.org> Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
2016-02-27ocfs2: unlock inode if deleting inode from orphan failsGuozhonghua1-0/+1
When doing append direct io cleanup, if deleting inode fails, it goes out without unlocking inode, which will cause the inode deadlock. This issue was introduced by commit cf1776a9e834 ("ocfs2: fix a tiny race when truncate dio orohaned entry"). Signed-off-by: Guozhonghua <guozhonghua@h3c.com> Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Reviewed-by: Gang He <ghe@suse.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: <stable@vger.kernel.org> [4.2+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-02-09ocfs2: Implement get_next_id()Jan Kara2-0/+27
Implement get_next_id() callback to enable use of Q_GETNEXTQUOTA quotactl for OCFS2. Signed-off-by: Jan Kara <jack@suse.cz>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-23 06:47:24 +0300