summaryrefslogtreecommitdiff
path: root/fs/nilfs2/nilfs.h
AgeCommit message (Collapse)AuthorFilesLines
2022-04-01nilfs2: fix lockdep warnings during disk space reclamationRyusuke Konishi1-0/+2
During disk space reclamation, nilfs2 still emits the following lockdep warning due to page/folio operations on shadowed page caches that nilfs2 uses to get a snapshot of DAT file in memory: WARNING: CPU: 0 PID: 2643 at include/linux/backing-dev.h:272 __folio_mark_dirty+0x645/0x670 ... RIP: 0010:__folio_mark_dirty+0x645/0x670 ... Call Trace: filemap_dirty_folio+0x74/0xd0 __set_page_dirty_nobuffers+0x85/0xb0 nilfs_copy_dirty_pages+0x288/0x510 [nilfs2] nilfs_mdt_save_to_shadow_map+0x50/0xe0 [nilfs2] nilfs_clean_segments+0xee/0x5d0 [nilfs2] nilfs_ioctl_clean_segments.isra.19+0xb08/0xf40 [nilfs2] nilfs_ioctl+0xc52/0xfb0 [nilfs2] __x64_sys_ioctl+0x11d/0x170 This fixes the remaining warning by using inode objects to hold those page caches. Link: https://lkml.kernel.org/r/1647867427-30498-3-git-send-email-konishi.ryusuke@gmail.com Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: Hao Sun <sunhao.th@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-04-01nilfs2: fix lockdep warnings in page operations for btree nodesRyusuke Konishi1-9/+5
Patch series "nilfs2 lockdep warning fixes". The first two are to resolve the lockdep warning issue, and the last one is the accompanying cleanup and low priority. Based on your comment, this series solves the issue by separating inode object as needed. Since I was worried about the impact of the object composition changes, I tested the series carefully not to cause regressions especially for delicate functions such like disk space reclamation and snapshots. This patch (of 3): If CONFIG_LOCKDEP is enabled, nilfs2 hits lockdep warnings at inode_to_wb() during page/folio operations for btree nodes: WARNING: CPU: 0 PID: 6575 at include/linux/backing-dev.h:269 inode_to_wb include/linux/backing-dev.h:269 [inline] WARNING: CPU: 0 PID: 6575 at include/linux/backing-dev.h:269 folio_account_dirtied mm/page-writeback.c:2460 [inline] WARNING: CPU: 0 PID: 6575 at include/linux/backing-dev.h:269 __folio_mark_dirty+0xa7c/0xe30 mm/page-writeback.c:2509 Modules linked in: ... RIP: 0010:inode_to_wb include/linux/backing-dev.h:269 [inline] RIP: 0010:folio_account_dirtied mm/page-writeback.c:2460 [inline] RIP: 0010:__folio_mark_dirty+0xa7c/0xe30 mm/page-writeback.c:2509 ... Call Trace: __set_page_dirty include/linux/pagemap.h:834 [inline] mark_buffer_dirty+0x4e6/0x650 fs/buffer.c:1145 nilfs_btree_propagate_p fs/nilfs2/btree.c:1889 [inline] nilfs_btree_propagate+0x4ae/0xea0 fs/nilfs2/btree.c:2085 nilfs_bmap_propagate+0x73/0x170 fs/nilfs2/bmap.c:337 nilfs_collect_dat_data+0x45/0xd0 fs/nilfs2/segment.c:625 nilfs_segctor_apply_buffers+0x14a/0x470 fs/nilfs2/segment.c:1009 nilfs_segctor_scan_file+0x47a/0x700 fs/nilfs2/segment.c:1048 nilfs_segctor_collect_blocks fs/nilfs2/segment.c:1224 [inline] nilfs_segctor_collect fs/nilfs2/segment.c:1494 [inline] nilfs_segctor_do_construct+0x14f3/0x6c60 fs/nilfs2/segment.c:2036 nilfs_segctor_construct+0x7a7/0xb30 fs/nilfs2/segment.c:2372 nilfs_segctor_thread_construct fs/nilfs2/segment.c:2480 [inline] nilfs_segctor_thread+0x3c3/0xf90 fs/nilfs2/segment.c:2563 kthread+0x405/0x4f0 kernel/kthread.c:327 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 This is because nilfs2 uses two page caches for each inode and inode->i_mapping never points to one of them, the btree node cache. This causes inode_to_wb(inode) to refer to a different page cache than the caller page/folio operations such like __folio_start_writeback(), __folio_end_writeback(), or __folio_mark_dirty() acquired the lock. This patch resolves the issue by allocating and using an additional inode to hold the page cache of btree nodes. The inode is attached one-to-one to the traditional nilfs2 inode if it requires a block mapping with b-tree. This setup change is in memory only and does not affect the disk format. Link: https://lkml.kernel.org/r/1647867427-30498-1-git-send-email-konishi.ryusuke@gmail.com Link: https://lkml.kernel.org/r/1647867427-30498-2-git-send-email-konishi.ryusuke@gmail.com Link: https://lore.kernel.org/r/YXrYvIo8YRnAOJCj@casper.infradead.org Link: https://lore.kernel.org/r/9a20b33d-b38f-b4a2-4742-c1eb5b8e4d6c@redhat.com Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Reported-by: syzbot+0d5b462a6f07447991b3@syzkaller.appspotmail.com Reported-by: syzbot+34ef28bb2aeb28724aa0@syzkaller.appspotmail.com Reported-by: Hao Sun <sunhao.th@gmail.com> Reported-by: David Hildenbrand <david@redhat.com> Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-09nilfs2: remove filenames from file commentsRyusuke Konishi1-1/+1
Remove filenames that are not particularly useful in file comments, and suppress checkpatch warnings WARNING: It's generally not useful to have the filename in the file Link: https://lkml.kernel.org/r/1635151862-11547-3-git-send-email-konishi.ryusuke@gmail.com Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Cc: Qing Wang <wangqing@vivo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-04-12nilfs2: convert to fileattrMiklos Szeredi1-0/+3
Use the fileattr API to let the VFS handle locking, permission checking and conversion. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Cc: Ryusuke Konishi <konishi.ryusuke@gmail.com>
2021-01-24fs: make helpers idmap mount awareChristian Brauner1-2/+4
Extend some inode methods with an additional user namespace argument. A filesystem that is aware of idmapped mounts will receive the user namespace the mount has been marked with. This can be used for additional permission checking and also to enable filesystems to translate between uids and gids if they need to. We have implemented all relevant helpers in earlier patches. As requested we simply extend the exisiting inode method instead of introducing new ones. This is a little more code churn but it's mostly mechanical and doesnt't leave us with additional inode methods. Link: https://lore.kernel.org/r/20210121131959.646623-25-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2020-08-12nilfs2: use a more common logging styleJoe Perches1-0/+9
Add macros for nilfs_<level>(sb, fmt, ...) and convert the uses of 'nilfs_msg(sb, KERN_<LEVEL>, ...)' to 'nilfs_<level>(sb, ...)' so nilfs2 uses a logging style more like the typical kernel logging style. Miscellanea: o Realign arguments for these uses Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/1595860111-3920-4-git-send-email-konishi.ryusuke@gmail.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12nilfs2: convert __nilfs_msg to integrate the level and formatJoe Perches1-5/+4
Reduce object size a bit by removing the KERN_<LEVEL> as a separate argument and adding it to the format string. Reduce overall object size by about ~.5% (x86-64 defconfig w/ nilfs2) old: $ size -t fs/nilfs2/built-in.a | tail -1 191738 8676 44 200458 30f0a (TOTALS) new: $ size -t fs/nilfs2/built-in.a | tail -1 190971 8676 44 199691 30c0b (TOTALS) Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/1595860111-3920-3-git-send-email-konishi.ryusuke@gmail.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-02nilfs2: switch to ->free_inode()Al Viro1-2/+0
kill an extern that went stale 9 years ago, while we are at it... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-09-05nilfs2: convert to SPDX license tagsRyusuke Konishi1-10/+1
Remove the verbose license text from NILFS2 files and replace them with SPDX tags. This does not change the license of any of the code. Link: http://lkml.kernel.org/r/1535624528-5982-1-git-send-email-konishi.ryusuke@lab.ntt.co.jp Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-03nilfs2: move ioctl interface and disk layout to uapi separatelyRyusuke Konishi1-1/+2
The header file "include/linux/nilfs2_fs.h" is composed of parts for ioctl and disk format, and both are intended to be shared with user space programs. This moves them to the uapi directory "include/uapi/linux" splitting the file to "nilfs2_api.h" and "nilfs2_ondisk.h". The following minor changes are accompanied by this migration: - nilfs_direct_node struct in nilfs2/direct.h is converged to nilfs2_ondisk.h because it's an on-disk structure. - inline functions nilfs_rec_len_from_disk() and nilfs_rec_len_to_disk() are moved to nilfs2/dir.c. Link: http://lkml.kernel.org/r/1465825507-3407-4-git-send-email-konishi.ryusuke@lab.ntt.co.jp Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-03nilfs2: use BIT() macroRyusuke Konishi1-8/+7
Replace bit shifts by BIT macro for clarity. Link: http://lkml.kernel.org/r/1465825507-3407-3-git-send-email-konishi.ryusuke@lab.ntt.co.jp Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-03nilfs2: replace nilfs_warning() with nilfs_msg()Ryusuke Konishi1-3/+4
Use nilfs_msg() to output warning messages and get rid of nilfs_warning() function. This also removes function names from the messages unless we embed them explicitly in format strings. Instead, some messages are revised to clarify the context. [arnd@arndb.de: avoid warning about unused variables] Link: http://lkml.kernel.org/r/20160615201945.3348205-1-arnd@arndb.de Link: http://lkml.kernel.org/r/1464875891-5443-6-git-send-email-konishi.ryusuke@lab.ntt.co.jp Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-03nilfs2: add nilfs_msg() message interfaceRyusuke Konishi1-0/+7
Define an own output routine to replace bare use of printk() function. The output routine is implemented with a macro and a helper function, which are named nilfs_msg() and __nilfs_msg(), respectively. __nilfs_msg() formats a message like "NILFS (<device-name>): <message>", prefixing it with a given log level, and terminates the statement with a newline. The "device-name" is optional to make it available in early stages; it will be omitted if a NULL pointer is passed to super block instance argument. nilfs_msg() wraps __nilfs_msg() and is removed if CONFIG_PRINTK is not set. Link: http://lkml.kernel.org/r/1464875891-5443-3-git-send-email-konishi.ryusuke@lab.ntt.co.jp Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-03nilfs2: hide function name argument from nilfs_error()Ryusuke Konishi1-1/+19
Simplify nilfs_error(), an output function used to report critical issues in file system. This renames the original nilfs_error() function to __nilfs_error() and redefines it as a macro to hide its function name argument within the macro. Every call site of nilfs_error() is changed to strip __func__ argument except nilfs_bmap_convert_error(); nilfs_bmap_convert_error() directly calls __nilfs_error() because it inherits caller's function name. Link: http://lkml.kernel.org/r/1464875891-5443-2-git-send-email-konishi.ryusuke@lab.ntt.co.jp Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-24nilfs2: fix block commentsRyusuke Konishi1-8/+16
This fixes block comments with proper formatting to eliminate the following checkpatch.pl warnings: "WARNING: Block comments use * on subsequent lines" "WARNING: Block comments use a trailing */ on a separate line" Link: http://lkml.kernel.org/r/1462886671-3521-8-git-send-email-konishi.ryusuke@lab.ntt.co.jp Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-24nilfs2: avoid bare use of 'unsigned'Ryusuke Konishi1-1/+1
This fixes checkpatch.pl warning "WARNING: Prefer 'unsigned int' to bare use of 'unsigned'". Link: http://lkml.kernel.org/r/1462886671-3521-5-git-send-email-konishi.ryusuke@lab.ntt.co.jp Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-24nilfs2: clean up old e-mail addressesRyusuke Konishi1-2/+1
E-mail addresses of osrg.net domain are no longer available. This removes them from authorship notices and prevents reporters from being confused. Link: http://lkml.kernel.org/r/1461935747-10380-5-git-send-email-konishi.ryusuke@lab.ntt.co.jp Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-24nilfs2: remove FSF mailing address from GPL noticesRyusuke Konishi1-4/+0
This removes the extra paragraph which mentions FSF address in GPL notices from source code of nilfs2 and avoids the checkpatch.pl error related to it. Link: http://lkml.kernel.org/r/1461935747-10380-4-git-send-email-konishi.ryusuke@lab.ntt.co.jp Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-06nilfs2: fix deadlock of segment constructor over I_SYNC flagRyusuke Konishi1-2/+0
Nilfs2 eventually hangs in a stress test with fsstress program. This issue was caused by the following deadlock over I_SYNC flag between nilfs_segctor_thread() and writeback_sb_inodes(): nilfs_segctor_thread() nilfs_segctor_thread_construct() nilfs_segctor_unlock() nilfs_dispose_list() iput() iput_final() evict() inode_wait_for_writeback() * wait for I_SYNC flag writeback_sb_inodes() * set I_SYNC flag on inode->i_state __writeback_single_inode() do_writepages() nilfs_writepages() nilfs_construct_dsync_segment() nilfs_segctor_sync() * wait for completion of segment constructor inode_sync_complete() * clear I_SYNC flag after __writeback_single_inode() completed writeback_sb_inodes() calls do_writepages() for dirty inodes after setting I_SYNC flag on inode->i_state. do_writepages() in turn calls nilfs_writepages(), which can run segment constructor and wait for its completion. On the other hand, segment constructor calls iput(), which can call evict() and wait for the I_SYNC flag on inode_wait_for_writeback(). Since segment constructor doesn't know when I_SYNC will be set, it cannot know whether iput() will block or not unless inode->i_nlink has a non-zero count. We can prevent evict() from being called in iput() by implementing sop->drop_inode(), but it's not preferable to leave inodes with i_nlink == 0 for long periods because it even defers file truncation and inode deallocation. So, this instead resolves the deadlock by calling iput() asynchronously with a workqueue for inodes with i_nlink == 0. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: Al Viro <viro@zeniv.linux.org.uk> Tested-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-14nilfs2: improve the performance of fdatasync()Andreas Rohner1-3/+11
Support for fdatasync() has been implemented in NILFS2 for a long time, but whenever the corresponding inode is dirty the implementation falls back to a full-flegded sync(). Since every write operation has to update the modification time of the file, the inode will almost always be dirty and fdatasync() will fall back to sync() most of the time. But this fallback is only necessary for a change of the file size and not for a change of the various timestamps. This patch adds a new flag NILFS_I_INODE_SYNC to differentiate between those two situations. * If it is set the file size was changed and a full sync is necessary. * If it is not set then only the timestamps were updated and fdatasync() can go ahead. There is already a similar flag I_DIRTY_DATASYNC on the VFS layer with the exact same semantics. Unfortunately it cannot be used directly, because NILFS2 doesn't implement write_inode() and doesn't clear the VFS flags when inodes are written out. So the VFS writeback thread can clear I_DIRTY_DATASYNC at any time without notifying NILFS2. So I_DIRTY_DATASYNC has to be mapped onto NILFS_I_INODE_SYNC in nilfs_update_inode(). Signed-off-by: Andreas Rohner <andreas.rohner@gmx.net> Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-09nilfs2: integrate sysfs support into driverVyacheslav Dubeyko1-0/+8
This patch integrates creation of sysfs groups and attributes into NILFS file system driver. It was found the issue with nilfs_sysfs_{create/delete}_snapshot_group functions by Michael L Semon <mlsemon35@gmail.com> in the first version of the patch: BUG: sleeping function called from invalid context at kernel/locking/mutex.c:579 in_atomic(): 1, irqs_disabled(): 0, pid: 32676, name: umount.nilfs2 2 locks held by umount.nilfs2/32676: #0: (&type->s_umount_key#21){++++..}, at: [<790c18e2>] deactivate_super+0x37/0x58 #1: (&(&nilfs->ns_cptree_lock)->rlock){+.+...}, at: [<791bf659>] nilfs_put_root+0x23/0x5a Preemption disabled at:[<791bf659>] nilfs_put_root+0x23/0x5a CPU: 0 PID: 32676 Comm: umount.nilfs2 Not tainted 3.14.0+ #2 Hardware name: Dell Computer Corporation Dimension 2350/07W080, BIOS A01 12/17/2002 Call Trace: dump_stack+0x4b/0x75 __might_sleep+0x111/0x16f mutex_lock_nested+0x1e/0x3ad kernfs_remove+0x12/0x26 sysfs_remove_dir+0x3d/0x62 kobject_del+0x13/0x38 nilfs_sysfs_delete_snapshot_group+0xb/0xd nilfs_put_root+0x2a/0x5a nilfs_detach_log_writer+0x1ab/0x2c1 nilfs_put_super+0x13/0x68 generic_shutdown_super+0x60/0xd1 kill_block_super+0x1d/0x60 deactivate_locked_super+0x22/0x3f deactivate_super+0x3e/0x58 mntput_no_expire+0xe2/0x141 SyS_oldumount+0x70/0xa5 syscall_call+0x7/0xb The reason of the issue was placement of nilfs_sysfs_{create/delete}_snapshot_group() call under nilfs->ns_cptree_lock protection. But this protection is unnecessary and wrong solution. The second version of the patch fixes this issue. [fengguang.wu@intel.com: nilfs_sysfs_create_mounted_snapshots_group can be static] Reported-by: Michael L. Semon <mlsemon35@gmail.com> Signed-off-by: Vyacheslav Dubeyko <Vyacheslav.Dubeyko@hgst.com> Cc: Vyacheslav Dubeyko <slava@dubeyko.com> Cc: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Tested-by: Michael L. Semon <mlsemon35@gmail.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-21nilfs2: drop vmtruncateMarco Stornelli1-0/+1
Removed vmtruncate Signed-off-by: Marco Stornelli <marco.stornelli@gmail.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-31nilfs2: add omitted comments for different structures in driver implementationVyacheslav Dubeyko1-2/+15
Add omitted comments for different structures in driver implementation. Signed-off-by: Vyacheslav Dubeyko <slava@dubeyko.com> Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-04nilfs: propagate umode_tAl Viro1-1/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-11-01treewide: use __printf not __attribute__((format(printf,...)))Joe Perches1-4/+4
Standardize the style for compiler based printf format verification. Standardized the location of __printf too. Done via script and a little typing. $ grep -rPl --include=*.[ch] -w "__attribute__" * | \ grep -vP "^(tools|scripts|include/linux/compiler-gcc.h)" | \ xargs perl -n -i -e 'local $/; while (<>) { s/\b__attribute__\s*\(\s*\(\s*format\s*\(\s*printf\s*,\s*(.+)\s*,\s*(.+)\s*\)\s*\)\s*\)/__printf($1, $2)/g ; print; }' [akpm@linux-foundation.org: revert arch bits] Signed-off-by: Joe Perches <joe@perches.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-21fs: push i_mutex and filemap_write_and_wait down into ->fsync() handlersJosef Bacik1-1/+1
Btrfs needs to be able to control how filemap_write_and_wait_range() is called in fsync to make it less of a painful operation, so push down taking i_mutex and the calling of filemap_write_and_wait() down into the ->fsync() handlers. Some file systems can drop taking the i_mutex altogether it seems, like ext3 and ocfs2. For correctness sake I just pushed everything down in all cases to make sure that we keep the current behavior the same for everybody, and then each individual fs maintainer can make up their mind about what to do from there. Thanks, Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-20->permission() sanitizing: don't pass flags to ->permission()Al Viro1-1/+1
not used by the instances anymore. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-05-27fs: pass exact type of data dirties to ->dirty_inodeChristoph Hellwig1-1/+1
Tell the filesystem if we just updated timestamp (I_DIRTY_SYNC) or anything else, so that the filesystem can track internally if it needs to push out a transaction for fdatasync or not. This is just the prototype change with no user for it yet. I plan to push large XFS changes for the next merge window, and getting this trivial infrastructure in this window would help a lot to avoid tree interdependencies. Also remove incorrect comments that ->dirty_inode can't block. That has been changed a long time ago, and many implementations rely on it. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-05-10nilfs2: always set back pointer to host inode in mapping->hostRyusuke Konishi1-6/+0
In the current nilfs, page cache for btree nodes and meta data files do not set a valid back pointer to the host inode in mapping->host. This will change it so that every address space in nilfs uses mapping->host to hold its host inode. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-05-10nilfs2: implement resize ioctlRyusuke Konishi1-0/+1
This adds resize ioctl which makes online resize possible. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-03-30nilfs2: fix whitespace coding style issuesNicolas Kaiser1-7/+7
Fixes whitespace coding style issues. Signed-off-by: Nicolas Kaiser <nikai@nikai.net> Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-03-09nilfs2: get rid of nilfs_sb_info structureRyusuke Konishi1-2/+1
This directly uses sb->s_fs_info to keep a nilfs filesystem object and fully removes the intermediate nilfs_sb_info structure. With this change, the hierarchy of on-memory structures of nilfs will be simplified as follows: Before: super_block -> nilfs_sb_info -> the_nilfs -> cptree --+-> nilfs_root (current file system) +-> nilfs_root (snapshot A) +-> nilfs_root (snapshot B) : -> nilfs_sc_info (log writer structure) After: super_block -> the_nilfs -> cptree --+-> nilfs_root (current file system) +-> nilfs_root (snapshot A) +-> nilfs_root (snapshot B) : -> nilfs_sc_info (log writer structure) The reason why we didn't design so from the beginning is because the initial shape also differed from the above. The early hierachy was composed of "per-mount-point" super_block -> nilfs_sb_info pairs and a shared nilfs object. On the kernel 2.6.37, it was changed to the current shape in order to unify super block instances into one per device, and this cleanup became applicable as the result. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-03-09nilfs2: use sb instance instead of nilfs_sb_info structRyusuke Konishi1-5/+5
This replaces sbi uses with direct reference to sb instance. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-03-08nilfs2: record used amount of each checkpoint in checkpoint listRyusuke Konishi1-0/+2
This records the number of used blocks per checkpoint in each checkpoint entry of cpfile. Even though userland tools can get the block count via nilfs_get_cpinfo ioctl, it was not updated by the nilfs2 kernel code. This fixes the issue and makes it available for userland tools to calculate used amount per checkpoint. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: Jiro SEKIBA <jir@unicus.jp>
2011-03-08nilfs2: add compat ioctlRyusuke Konishi1-0/+1
The current FS_IOC_GETFLAGS/SETFLAGS/GETVERSION will fail if application is 32 bit and kernel is 64 bit. This issue is avoidable by adding compat_ioctl method. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-03-08nilfs2: tighten restrictions on inode flagsRyusuke Konishi1-0/+17
Nilfs has few rectrictions on which flags may be set on which inodes like ext2/3/4 filesystems used to be. Specifically DIRSYNC may only be set on directories and IMMUTABLE and APPEND may not be set on links. Tighten that to disallow TOPDIR being set on non-directories and only NODUMP and NOATIME to be set on non-regular file, non-directories. This introduces a flags masking function like those of extN and uses it during inode creation. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-01-10nilfs2: unfold nilfs_dat_inode functionRyusuke Konishi1-5/+0
nilfs_dat_inode function was a wrapper to switch between normal dat inode and gcdat, a clone of the dat inode for garbage collection. This function got obsolete when the gcdat inode was removed, and now we can access the dat inode directly from a nilfs object. So, we will unfold the wrapper and remove it. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-01-10nilfs2: do not pass sbi to functions which can get it from inodeRyusuke Konishi1-4/+2
This removes argument for passing nilfs_sb_info structure from nilfs_set_file_dirty and nilfs_load_inode_block functions. We can get a pointer to the structure from inodes. [Stephen Rothwell <sfr@canb.auug.org.au>: fix conflict with commit b74c79e99389cd79b31fcc08f82c24e492e63c7e] Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-01-10nilfs2: fiemap supportRyusuke Konishi1-0/+2
This adds fiemap to nilfs. Two new functions, nilfs_fiemap and nilfs_find_uncommitted_extent are added. nilfs_fiemap() implements the fiemap inode operation, and nilfs_find_uncommitted_extent() helps to get a range of data blocks whose physical location has not been determined. nilfs_fiemap() collects extent information by looping through nilfs_bmap_lookup_contig and nilfs_find_uncommitted_extent routines. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-01-07fs: provide rcu-walk aware permission i_opsNick Piggin1-1/+1
Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2010-10-23nilfs2: remove own inode allocator and destructor for metadata filesRyusuke Konishi1-1/+0
This finally removes own inode allocator and destructor functions for metadata files. Several routines, nilfs_mdt_new(), nilfs_mdt_new_common(), nilfs_mdt_clear(), nilfs_mdt_destroy(), and nilfs_alloc_inode_common() will be gone. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-10-23nilfs2: see state of root dentry for mount check of snapshotsRyusuke Konishi1-0/+3
After applied the patch that unified sb instances, root dentry of snapshots can be left in dcache even after their trees are unmounted. The orphan root dentry/inode keeps a root object, and this causes false positive of nilfs_checkpoint_is_mounted function. This resolves the issue by having nilfs_checkpoint_is_mounted test whether the root dentry is busy or not. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-10-23nilfs2: use iget for all metadata filesRyusuke Konishi1-0/+2
This makes use of iget5_locked to allocate or get inode for metadata files to stop using own inode allocator. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-10-23nilfs2: get rid of GCDAT inodeRyusuke Konishi1-7/+1
This applies prepared rollback function and redirect function of metadata file to DAT file, and eliminates GCDAT inode. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-10-23nilfs2: deny write access to inodes in snapshotsRyusuke Konishi1-3/+1
Snapshots of nilfs are read-only. After super block instances (sb) will be unified, nilfs will need to check write access by a way other than implicit test with IS_RDONLY(inode). This is because IS_RDONLY() refers to MS_RDONLY bit of inode->i_sb->s_flags and it will become inaccurate after the unification of sb. To prepare for the issue, this uses i_op->permission to deny write access to inodes in snapshots. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-10-23nilfs2: use root object to get ifileRyusuke Konishi1-1/+0
This rewrites functions using ifile so that they get ifile from nilfs_root object, and will remove sbi->s_ifile. Some functions that don't know the root object are extended to receive it from caller. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-10-23nilfs2: make snapshots in checkpoint tree exportableRyusuke Konishi1-3/+0
The previous export operations cannot handle multiple versions of a filesystem if they belong to the same sb instance. This adds a new type of file handle and extends export operations so that they can get the inode specified by a checkpoint number as well as an inode number and a generation number. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-10-23nilfs2: set pointer to root object in inodesRyusuke Konishi1-2/+5
This puts a pointer to nilfs_root object in the private part of on-memory inode, and makes nilfs_iget function pick up the inode with the same root object. Non-root inodes inherit its nilfs_root object from parent inode. That of the root inode is allocated through nilfs_attach_checkpoint() function. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-10-23nilfs2: remove own inode hash used for GCRyusuke Konishi1-5/+4
This uses inode hash function that vfs provides instead of the own hash table for caching gc inodes. This finally removes the own inode hash from nilfs. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-08-10Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (96 commits) no need for list_for_each_entry_safe()/resetting with superblock list Fix sget() race with failing mount vfs: don't hold s_umount over close_bdev_exclusive() call sysv: do not mark superblock dirty on remount sysv: do not mark superblock dirty on mount btrfs: remove junk sb_dirt change BFS: clean up the superblock usage AFFS: wait for sb synchronization when needed AFFS: clean up dirty flag usage cifs: truncate fallout mbcache: fix shrinker function return value mbcache: Remove unused features add f_flags to struct statfs(64) pass a struct path to vfs_statfs update VFS documentation for method changes. All filesystems that need invalidate_inode_buffers() are doing that explicitly convert remaining ->clear_inode() to ->evict_inode() Make ->drop_inode() just return whether inode needs to be dropped fs/inode.c:clear_inode() is gone fs/inode.c:evict() doesn't care about delete vs. non-delete paths now ... Fix up trivial conflicts in fs/nilfs2/super.c
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-17 09:02:36 +0300