| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[ Upstream commit 3903902401451b1cd9d797a8c79769eb26ac7fe5 ]
The original implementation of nfsd used signals to stop threads during
shutdown.
In Linux 2.3.46pre5 nfsd gained the ability to shutdown threads
internally it if was asked to run "0" threads. After this user-space
transitioned to using "rpc.nfsd 0" to stop nfsd and sending signals to
threads was no longer an important part of the API.
In commit 3ebdbe5203a8 ("SUNRPC: discard svo_setup and rename
svc_set_num_threads_sync()") (v5.17-rc1~75^2~41) we finally removed the
use of signals for stopping threads, using kthread_stop() instead.
This patch makes the "obvious" next step and removes the ability to
signal nfsd threads - or any svc threads. nfsd stops allowing signals
and we don't check for their delivery any more.
This will allow for some simplification in later patches.
A change worth noting is in nfsd4_ssc_setup_dul(). There was previously
a signal_pending() check which would only succeed when the thread was
being shut down. It should really have tested kthread_should_stop() as
well. Now it just does the latter, not the former.
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
[ cel: adjusted to apply to v5.10.y ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit dcb779fcd4ed5984ad15991d574943d12a8693d1 ]
On most filesystems, there is no reason to delay reaping an nfsd_file
just because its underlying inode is still under writeback. nfsd just
relies on client activity or the local flusher threads to do writeback.
The main exception is NFS, which flushes all of its dirty data on last
close. Add a new EXPORT_OP_FLUSH_ON_CLOSE flag to allow filesystems to
signal that they do this, and only skip closing files under writeback on
such filesystems.
Also, remove a redundant NULL file pointer check in
nfsd_file_check_writeback, and clean up nfs's export op flag
definitions.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
[ cel: adjusted to apply to v5.10.y ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 103cc1fafee48adb91fca0e19deb869fd23e46ab ]
Currently, SUNRPC clears the whole of .pc_argsize before processing
each incoming RPC transaction. Add an extra parameter to struct
svc_procedure to enable upper layers to reduce the amount of each
operation's argument structure that is zeroed by SUNRPC.
The size of struct nfsd4_compoundargs, in particular, is a lot to
clear on each incoming RPC Call. A subsequent patch will cut this
down to something closer to what NFSv2 and NFSv3 uses.
This patch should cause no behavior changes.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 080abad71e99d2becf38c978572982130b927a28 ]
Commit f49169c97fce ("NFSD: Remove svc_serv_ops::svo_module") removed
calls to module_put_and_kthread_exit() from threads that acted as SUNRPC
servers and had a related svc_serv_ops structure. This was correct.
It ALSO removed the module_put_and_kthread_exit() call from
nfs4_run_state_manager() which is NOT a SUNRPC service.
Consequently every time the NFSv4 state manager runs the module count
increments and won't be decremented. So the nfsv4 module cannot be
unloaded.
So restore the module_put_and_kthread_exit() call.
Fixes: f49169c97fce ("NFSD: Remove svc_serv_ops::svo_module")
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 37902c6313090235c847af89c5515591261ee338 ]
Hoist svo_function back into svc_serv and remove struct
svc_serv_ops, since the struct is now devoid of fields.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f49169c97fceb21ad6a0aaf671c50b0f520f15a5 ]
struct svc_serv_ops is about to be removed.
Neil Brown says:
> I suspect svo_module can go as well - I don't think the thread is
> ever the thing that primarily keeps a module active.
A random sample of kthread_create() callers shows sunrpc is the only
one that manages module reference count in this way.
Suggested-by: Neil Brown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c7d7ec8f043e53ad16e30f5ebb8b9df415ec0f2b ]
Clean up: svc_shutdown_net() now does nothing but call
svc_close_net(). Replace all external call sites.
svc_close_net() is renamed to be the inverse of svc_xprt_create().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 352ad31448fecc78a2e9b78da64eea5d63b8d0ce ]
Clean up: Use the "svc_xprt_<task>" function naming convention as
is used for other external APIs.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a9ff2e99e9fa501ec965da03c18a5422b37a2f44 ]
We have never been able to track down and address the underlying
cause of the performance issues with workqueue-based service
support. svo_enqueue_xprt is called multiple times per RPC, so
it adds instruction path length, but always ends up at the same
function: svc_xprt_do_enqueue(). We do not anticipate needing
this flexibility for dynamic nfsd thread management support.
As a micro-optimization, remove .svo_enqueue_xprt because
Spectre/Meltdown makes virtual function calls more costly.
This change essentially reverts commit b9e13cdfac70 ("nfsd/sunrpc:
turn enqueueing a svc_xprt into a svc_serv operation").
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 40595cdc93edf4110c0f0c0b06f8d82008f23929 ]
NFSv4.1 supports an optional lock notification feature which notifies
the client when a lock comes available. (Normally NFSv4 clients just
poll for locks if necessary.) To make that work, we need to request a
blocking lock from the filesystem.
We turned that off for NFS in commit f657f8eef3ff ("nfs: don't atempt
blocking locks on nfs reexports") [sic] because it actually blocks the
nfsd thread while waiting for the lock.
Thanks to Vasily Averin for pointing out that NFS isn't the only
filesystem with that problem.
Any filesystem that leaves ->lock NULL will use posix_lock_file(), which
does the right thing. Simplest is just to assume that any filesystem
that defines its own ->lock is not safe to request a blocking lock from.
So, this patch mostly reverts commit f657f8eef3ff ("nfs: don't atempt
blocking locks on nfs reexports") [sic] and commit b840be2f00c0 ("lockd:
don't attempt blocking locks on nfs reexports"), and instead uses a
check of ->lock (Vasily's suggestion) to decide whether to support
blocking lock notifications on a given filesystem. Also add a little
documentation.
Perhaps someday we could add back an export flag later to allow
filesystems with "good" ->lock methods to support blocking lock
notifications.
Reported-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
[ cel: Description rewritten to address checkpatch nits ]
[ cel: Fixed warning when SUNRPC debugging is disabled ]
[ cel: Fixed NULL check ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 23a1a573c61ccb5e7829c1f5472d3e025293a031 ]
Now that thread management is consistent there is no need for
nfs-callback to use svc_create_pooled() as introduced in Commit
df807fffaabd ("NFSv4.x/callback: Create the callback service through
svc_create_pooled"). So switch back to svc_create().
If service pools were configured, but the number of threads were left at
'1', nfs callback may not work reliably when svc_create_pooled() is used.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3ebdbe5203a874614819700d3f470724cb803709 ]
The ->svo_setup callback serves no purpose. It is always called from
within the same module that chooses which callback is needed. So
discard it and call the relevant function directly.
Now that svc_set_num_threads() is no longer used remove it and rename
svc_set_num_threads_sync() to remove the "_sync" suffix.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ec52361df99b490f6af412b046df9799b92c1050 ]
The use of sv_nrthreads as a general refcount results in clumsy code, as
is seen by various comments needed to explain the situation.
This patch introduces a 'struct kref' and uses that for reference
counting, leaving sv_nrthreads to be a pure count of threads. The kref
is managed particularly in svc_get() and svc_put(), and also nfsd_put();
svc_destroy() now takes a pointer to the embedded kref, rather than to
the serv.
nfsd allows the svc_serv to exist with ->sv_nrhtreads being zero. This
happens when a transport is created before the first thread is started.
To support this, a 'keep_active' flag is introduced which holds a ref on
the svc_serv. This is set when any listening socket is successfully
added (unless there are running threads), and cleared when the number of
threads is set. So when the last thread exits, the nfs_serv will be
destroyed.
The use of 'keep_active' replaces previous code which checked if there
were any permanent sockets.
We no longer clear ->rq_server when nfsd() exits. This was done
to prevent svc_exit_thread() from calling svc_destroy().
Instead we take an extra reference to the svc_serv to prevent
svc_destroy() from being called.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8c62d12740a1450d2e8456d5747f440e10db281a ]
svc_destroy() is poorly named - it doesn't necessarily destroy the svc,
it might just reduce the ref count.
nfsd_destroy() is poorly named for the same reason.
This patch:
- removes the refcount functionality from svc_destroy(), moving it to
a new svc_put(). Almost all previous callers of svc_destroy() now
call svc_put().
- renames nfsd_destroy() to nfsd_put() and improves the code, using
the new svc_destroy() rather than svc_put()
- removes a few comments that explain the important for balanced
get/put calls. This should be obvious.
The only non-trivial part of this is that svc_destroy() would call
svc_sock_update() on a non-final decrement. It can no longer do that,
and svc_put() isn't really a good place of it. This call is now made
from svc_exit_thread() which seems like a good place. This makes the
call *before* sv_nrthreads is decremented rather than after. This
is not particularly important as the call just sets a flag which
causes sv_nrthreads set be checked later. A subsequent patch will
improve the ordering.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit df5e49c880ea0776806b8a9f8ab95e035272cf6f ]
It is common for 'get' functions to return the object that was 'got',
and there are a couple of places where users of svc_get() would be a
little simpler if svc_get() did that.
Make it so.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ca3574bd653aba234a4b31955f2778947403be16 ]
Update module_put_and_exit to call kthread_exit instead of do_exit.
Change the name to reflect this change in functionality. All of the
users of module_put_and_exit are causing the current kthread to exit
so this change makes it clear what is happening. There is no
functional change.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 130e2054d4a652a2bd79fb1557ddcd19c053cb37 ]
Returning an undecorated integer is an age-old trope, but it's
not clear (even to previous experts in this code) that the only
valid return values are 1 and 0. These functions do not return
a negative errno, rpc_stat value, or a positive length.
Document there are only two valid return values by having
.pc_encode return only true or false.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fda494411485aff91768842c532f90fb8eb54943 ]
The passed-in value of the "__be32 *p" parameter is now unused in
every server-side XDR encoder, and can be removed.
Note also that there is a line in each encoder that sets up a local
pointer to a struct xdr_stream. Passing that pointer from the
dispatcher instead saves one line per encoder function.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b40887e10dcacc5e8ae3c1a99dcba20877c4831b ]
Introduce a single tracepoint that can replace simple dprintk call
sites in upper layer "rpc_call_done" callbacks. Example:
kworker/u24:2-1254 [001] 771.026677: rpc_stats_latency: task:00000001@00000002 xid=0x16a6f3c0 rpcbindv2 GETPORT backlog=446 rtt=101 execute=555
kworker/u24:2-1254 [001] 771.026677: rpc_task_call_done: task:00000001@00000002 flags=ASYNC|DYNAMIC|SOFT|SOFTCONN|SENT runstate=RUNNING|ACTIVE status=0 action=rpcb_getport_done
kworker/u24:2-1254 [001] 771.026678: rpcb_setport: task:00000001@00000002 status=0 port=20048
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c35a810ce59524971c4a3b45faed4d0121e5a305 ]
Clean up: The callback RPC dispatcher no longer invokes these call
outs, although svc_process_common() relies on seeing a .pc_encode
function.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7d34c96217cf3c2d37ca0a56ca0bc3c3bef1e189 ]
The client's NFSv4 callback service is the only remaining user of
svc_generic_dispatch().
Note that the NFSv4 callback service doesn't use the .pc_encode and
.pc_decode callouts in any substantial way, so they are removed.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9082e1d914f8b27114352b1940bbcc7522f682e7 ]
Now that there is an alternate method for returning an auth_stat
value, replace the RQ_AUTHERR flag with use of that new method.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5c2465dfd457f3015eebcc3ace50570e1d896aeb ]
In a few moments, rq_auth_stat will need to be explicitly set to
rpc_auth_ok before execution gets to the dispatcher.
svc_authenticate() already sets it, but it often gets reset to
rpc_autherr_badcred right after that call, even when authentication
is successful. Let's ensure that the pg_authenticate callout and
svc_set_client() set it properly in every case.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bb0a55bb7148a49e549ee992200860e7a040d3a5 ]
In the reexport case, nfsd is currently passing along locks with the
reclaim bit set. The client sends a new lock request, which is granted
if there's currently no conflict--even if it's possible a conflicting
lock could have been briefly held in the interim.
We don't currently have any way to safely grant reclaim, so for now
let's just deny them all.
I'm doing this by passing the reclaim bit to nfs and letting it fail the
call, with the idea that eventually the client might be able to do
something more forgiving here.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Acked-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f657f8eef3ff870552c9fd2839e0061046f44618 ]
NFS implements blocking locks by blocking inside its lock method. In
the reexport case, this blocks the nfs server thread, which could lead
to deadlocks since an nfs server thread might be required to unlock the
conflicting lock. It also causes a crash, since the nfs server thread
assumes it can free the lock when its lm_notify lock callback is called.
Ideal would be to make the nfs lock method return without blocking in
this case, but for now it works just not to attempt blocking locks. The
difference is just that the original client will have to poll (as it
does in the v4.0 case) instead of getting a callback when the lock's
available.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Acked-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b876d708316bf9b6b9678eb2beb289b93cfe6369 ]
The change attribute is always set by all NFS client versions so get rid
of the open-coded version.
Fixes: 3cc55f4434b4 ("nfs: use change attribute for NFS re-exports")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d9092b4bb2109502eb8972021a3f74febc931a63 ]
The client SSC code should not depend on any of the CONFIG_NFSD config.
This patch removes all CONFIG_NFSD from NFSv4.2 client SSC code and
simplifies the config of CONFIG_NFS_V4_2_SSC_HELPER, NFSD_V4_2_INTER_SSC.
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3cc55f4434b421d37300aa9a167ace7d60b45ccf ]
When exporting NFS, we may as well use the real change attribute
returned by the original server instead of faking up a change attribute
from the ctime.
Note we can't do that by setting I_VERSION--that would also turn on the
logic in iversion.h which treats the lower bit specially, and that
doesn't make sense for NFS.
So instead we define a new export operation for filesystems like NFS
that want to manage the change attribute themselves.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 02591f9febd5f69bb4c266a4abf899c4cf21964f ]
Currently NFSv4_2 SSC helper, nfs_ssc, incorrectly uses GRACE_PERIOD
as its config. Fix by adding new config NFS_V4_2_SSC_HELPER which
depends on NFS_V4_2 and is automatically selected when NFSD_V4 is
enabled. Also removed the file name from a comment in nfs_ssc.c.
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2289e87b5951f97783f07fc895e6c5e804b53668 ]
The next few patches will employ these strings to help make server-
side trace logs more human-readable. A similar technique is already
in use in kernel RPC client code.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 716a8bc7f706eeef80ab42c99d9f210eda845c81 ]
For the case of NFSv4, specify to the client that the pre/post-op
attributes were not recorded atomically with the main operation.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 01cbf3853959feec40ec9b9a399e12a021cd4d81 ]
Don't set PF_LOCAL_THROTTLE on remote filesystems like NFS, since they
aren't expected to ever be subject to double buffering.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7f84b488f9add1d5cca3e6197c95914c7bd3c1cf ]
It's not uncommon for some workloads to do a bunch of I/O to a file and
delete it just afterward. If knfsd has a cached open file however, then
the file may still be open when the dentry is unlinked. If the
underlying filesystem is nfs, then that could trigger it to do a
sillyrename.
On a REMOVE or RENAME scan the nfsd_file cache for open files that
correspond to the inode, and proactively unhash and put their
references. This should prevent any delete-on-last-close activity from
occurring, solely due to knfsd's open file cache.
This must be done synchronously though so we use the variants that call
flush_delayed_fput. There are deadlock possibilities if you call
flush_delayed_fput while holding locks, however. In the case of
nfsd_rename, we don't even do the lookups of the dentries to be renamed
until we've locked for rename.
Once we've figured out what the target dentry is for a rename, check to
see whether there are cached open files associated with it. If there
are, then unwind all of the locking, close them all, and then reattempt
the rename.
None of this is really necessary for "typical" filesystems though. It's
mostly of use for NFS, so declare a new export op flag and use that to
determine whether to close the files beforehand.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Lance Shelton <lance.shelton@hammerspace.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
[ cel: adjusted to apply to 5.10.y ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ba5e8187c55555519ae0b63c0fb681391bc42af9 ]
When we start allowing NFS to be reexported, then we have some problems
when it comes to subtree checking. In principle, we could allow it, but
it would mean encoding parent info in the filehandles and there may not
be enough space for that in a NFSv3 filehandle.
To enforce this at export upcall time, we add a new export_ops flag
that declares the filesystem ineligible for subtree checking.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Lance Shelton <lance.shelton@hammerspace.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit daab110e47f8d7aa6da66923e3ac1a8dbd2b2a72 ]
With NFSv3 nfsd will always attempt to send along WCC data to the
client. This generally involves saving off the in-core inode information
prior to doing the operation on the given filehandle, and then issuing a
vfs_getattr to it after the op.
Some filesystems (particularly clustered or networked ones) have an
expensive ->getattr inode operation. Atomicity is also often difficult
or impossible to guarantee on such filesystems. For those, we're best
off not trying to provide WCC information to the client at all, and to
simply allow it to poll for that information as needed with a GETATTR
RPC.
This patch adds a new flags field to struct export_operations, and
defines a new EXPORT_OP_NOWCC flag that filesystems can use to indicate
that nfsd should not attempt to provide WCC info in NFSv3 replies. It
also adds a blurb about the new flags field and flag to the exporting
documentation.
The server will also now skip collecting this information for NFSv2 as
well, since that info is never used there anyway.
Note that this patch does not add this flag to any filesystem
export_operations structures. This was originally developed to allow
reexporting nfs via nfsd.
Other filesystems may want to consider enabling this flag too. It's hard
to tell however which ones have export operations to enable export via
knfsd and which ones mostly rely on them for open-by-filehandle support,
so I'm leaving that up to the individual maintainers to decide. I am
cc'ing the relevant lists for those filesystems that I think may want to
consider adding this though.
Cc: HPDD-discuss@lists.01.org
Cc: ceph-devel@vger.kernel.org
Cc: cluster-devel@redhat.com
Cc: fuse-devel@lists.sourceforge.net
Cc: ocfs2-devel@oss.oracle.com
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Lance Shelton <lance.shelton@hammerspace.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0ae4c3e8a64ace1b8d7de033b0751afe43024416 ]
Clean up: De-duplicate some frequently-used code.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit f06d1b10cb016d5aaecdb1804fefca025387bd10 upstream.
Olga showed me a case where the client was sending multiple READ_PLUS
calls to the server in parallel, and the server replied
NFS4ERR_OPNOTSUPP to each. The client would fall back to READ for the
first reply, but fail to retry the other calls.
I fix this by removing the test for NFS_CAP_READ_PLUS in
nfs4_read_plus_not_supported(). This allows us to reschedule any
READ_PLUS call that has a NFS4ERR_OPNOTSUPP return value, even after the
capability has been cleared.
Reported-by: Olga Kornievskaia <kolga@netapp.com>
Fixes: c567552612ec ("NFS: Add READ_PLUS data segment support")
Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3c0a2e0b0ae661457c8505fecc7be5501aa7a715 upstream.
Shifting *signed int* typed constant 1 left by 31 bits causes undefined
behavior. Specify the correct *unsigned long* type by using 1UL instead.
Found by Linux Verification Center (linuxtesting.org) with the Svace static
analysis tool.
Cc: stable@vger.kernel.org
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 24457f1be29f1e7042e50a7749f5c2dde8c433c8 ]
syzkaller reported a warning [0] triggered while destroying immature
netns.
rpc_proc_register() was called in init_nfs_fs(), but its error
has been ignored since at least the initial commit 1da177e4c3f4
("Linux-2.6.12-rc2").
Recently, commit d47151b79e32 ("nfs: expose /proc/net/sunrpc/nfs
in net namespaces") converted the procfs to per-netns and made
the problem more visible.
Even when rpc_proc_register() fails, nfs_net_init() could succeed,
and thus nfs_net_exit() will be called while destroying the netns.
Then, remove_proc_entry() will be called for non-existing proc
directory and trigger the warning below.
Let's handle the error of rpc_proc_register() properly in nfs_net_init().
[0]:
name 'nfs'
WARNING: CPU: 1 PID: 1710 at fs/proc/generic.c:711 remove_proc_entry+0x1bb/0x2d0 fs/proc/generic.c:711
Modules linked in:
CPU: 1 PID: 1710 Comm: syz-executor.2 Not tainted 6.8.0-12822-gcd51db110a7e #12
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:remove_proc_entry+0x1bb/0x2d0 fs/proc/generic.c:711
Code: 41 5d 41 5e c3 e8 85 09 b5 ff 48 c7 c7 88 58 64 86 e8 09 0e 71 02 e8 74 09 b5 ff 4c 89 e6 48 c7 c7 de 1b 80 84 e8 c5 ad 97 ff <0f> 0b eb b1 e8 5c 09 b5 ff 48 c7 c7 88 58 64 86 e8 e0 0d 71 02 eb
RSP: 0018:ffffc9000c6d7ce0 EFLAGS: 00010286
RAX: 0000000000000000 RBX: ffff8880422b8b00 RCX: ffffffff8110503c
RDX: ffff888030652f00 RSI: ffffffff81105045 RDI: 0000000000000001
RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000001 R11: ffffffff81bb62cb R12: ffffffff84807ffc
R13: ffff88804ad6fcc0 R14: ffffffff84807ffc R15: ffffffff85741ff8
FS: 00007f30cfba8640(0000) GS:ffff88807dd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ff51afe8000 CR3: 000000005a60a005 CR4: 0000000000770ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<TASK>
rpc_proc_unregister+0x64/0x70 net/sunrpc/stats.c:310
nfs_net_exit+0x1c/0x30 fs/nfs/inode.c:2438
ops_exit_list+0x62/0xb0 net/core/net_namespace.c:170
setup_net+0x46c/0x660 net/core/net_namespace.c:372
copy_net_ns+0x244/0x590 net/core/net_namespace.c:505
create_new_namespaces+0x2ed/0x770 kernel/nsproxy.c:110
unshare_nsproxy_namespaces+0xae/0x160 kernel/nsproxy.c:228
ksys_unshare+0x342/0x760 kernel/fork.c:3322
__do_sys_unshare kernel/fork.c:3393 [inline]
__se_sys_unshare kernel/fork.c:3391 [inline]
__x64_sys_unshare+0x1f/0x30 kernel/fork.c:3391
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x4f/0x110 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x46/0x4e
RIP: 0033:0x7f30d0febe5d
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 73 9f 1b 00 f7 d8 64 89 01 48
RSP: 002b:00007f30cfba7cc8 EFLAGS: 00000246 ORIG_RAX: 0000000000000110
RAX: ffffffffffffffda RBX: 00000000004bbf80 RCX: 00007f30d0febe5d
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 000000006c020600
RBP: 00000000004bbf80 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000002
R13: 000000000000000b R14: 00007f30d104c530 R15: 0000000000000000
</TASK>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1548036ef1204df65ca5a16e8b199c858cb80075 ]
Now that we're exposing the rpc stats on a per-network namespace basis,
move this struct into struct nfs_net and use that to make sure only the
per-network namespace stats are exposed.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Stable-dep-of: 24457f1be29f ("nfs: Handle error of rpc_proc_register() in nfs_net_init().")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d47151b79e3220e72ae323b8b8e9d6da20dc884e ]
We're using nfs mounts inside of containers in production and noticed
that the nfs stats are not exposed in /proc. This is a problem for us
as we use these stats for monitoring, and have to do this awkward bind
mount from the main host into the container in order to get to these
states.
Add the rpc_proc_register call to the pernet operations entry and exit
points so these stats can be exposed inside of network namespaces.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Stable-dep-of: 24457f1be29f ("nfs: Handle error of rpc_proc_register() in nfs_net_init().")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 17f46b803d4f23c66cacce81db35fef3adb8f2af ]
In production we have been hitting the following warning consistently
------------[ cut here ]------------
refcount_t: underflow; use-after-free.
WARNING: CPU: 17 PID: 1800359 at lib/refcount.c:28 refcount_warn_saturate+0x9c/0xe0
Workqueue: nfsiod nfs_direct_write_schedule_work [nfs]
RIP: 0010:refcount_warn_saturate+0x9c/0xe0
PKRU: 55555554
Call Trace:
<TASK>
? __warn+0x9f/0x130
? refcount_warn_saturate+0x9c/0xe0
? report_bug+0xcc/0x150
? handle_bug+0x3d/0x70
? exc_invalid_op+0x16/0x40
? asm_exc_invalid_op+0x16/0x20
? refcount_warn_saturate+0x9c/0xe0
nfs_direct_write_schedule_work+0x237/0x250 [nfs]
process_one_work+0x12f/0x4a0
worker_thread+0x14e/0x3b0
? ZSTD_getCParams_internal+0x220/0x220
kthread+0xdc/0x120
? __btf_name_valid+0xa0/0xa0
ret_from_fork+0x1f/0x30
This is because we're completing the nfs_direct_request twice in a row.
The source of this is when we have our commit requests to submit, we
process them and send them off, and then in the completion path for the
commit requests we have
if (nfs_commit_end(cinfo.mds))
nfs_direct_write_complete(dreq);
However since we're submitting asynchronous requests we sometimes have
one that completes before we submit the next one, so we end up calling
complete on the nfs_direct_request twice.
The only other place we use nfs_generic_commit_list() is in
__nfs_commit_inode, which wraps this call in a
nfs_commit_begin();
nfs_commit_end();
Which is a common pattern for this style of completion handling, one
that is also repeated in the direct code with get_dreq()/put_dreq()
calls around where we process events as well as in the completion paths.
Fix this by using the same pattern for the commit requests.
Before with my 200 node rocksdb stress running this warning would pop
every 10ish minutes. With my patch the stress test has been running for
several hours without popping.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 698ad1a538da0b6bf969cfee630b4e3a026afb87 ]
The intent is to check if 'dest' is truncated or not. So, >= should be
used instead of >, because strlcat() returns the length of 'dest' and 'src'
excluding the trailing NULL.
Fixes: 56463e50d1fc ("NFS: Use super.c for NFSROOT mount option parsing")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bcac8bff90a6ee1629f90669cdb9d28fb86049b0 ]
Switch order of operations to avoid creating a short XDR buffer:
e.g., buflen = 12, old xdrlen = 12, new xdrlen = 20.
Having a short XDR buffer leads to lxa_maxcount be a few bytes
less than what is needed to retrieve the whole list when using
a buflen as returned by a call with size = 0:
buflen = listxattr(path, NULL, 0);
buf = malloc(buflen);
buflen = listxattr(path, buf, buflen);
For a file with one attribute (name = '123456'), the first call
with size = 0 will return buflen = 12 ('user.123456\x00').
The second call with size = 12, sends LISTXATTRS with
lxa_maxcount = 12 + 8 (cookie) + 4 (array count) = 24. The
XDR buffer needs 8 (cookie) + 4 (array count) + 4 (name count)
+ 6 (name len) + 2 (padding) + 4 (eof) = 28 which is 4 bytes
shorter than the lxa_maxcount provided in the call.
Fixes: 04a5da690e8f ("NFSv4.2: define limits and sizes for user xattr handling")
Signed-off-by: Jorge Mora <mora@netapp.com>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 251a658bbfceafb4d58c76b77682c8bf7bcfad65 ]
A call to listxattr() with a buffer size = 0 returns the actual
size of the buffer needed for a subsequent call. When size > 0,
nfs4_listxattr() does not return an error because either
generic_listxattr() or nfs4_listxattr_nfs4_label() consumes
exactly all the bytes then size is 0 when calling
nfs4_listxattr_nfs4_user() which then triggers the following
kernel BUG:
[ 99.403778] kernel BUG at mm/usercopy.c:102!
[ 99.404063] Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
[ 99.408463] CPU: 0 PID: 3310 Comm: python3 Not tainted 6.6.0-61.fc40.aarch64 #1
[ 99.415827] Call trace:
[ 99.415985] usercopy_abort+0x70/0xa0
[ 99.416227] __check_heap_object+0x134/0x158
[ 99.416505] check_heap_object+0x150/0x188
[ 99.416696] __check_object_size.part.0+0x78/0x168
[ 99.416886] __check_object_size+0x28/0x40
[ 99.417078] listxattr+0x8c/0x120
[ 99.417252] path_listxattr+0x78/0xe0
[ 99.417476] __arm64_sys_listxattr+0x28/0x40
[ 99.417723] invoke_syscall+0x78/0x100
[ 99.417929] el0_svc_common.constprop.0+0x48/0xf0
[ 99.418186] do_el0_svc+0x24/0x38
[ 99.418376] el0_svc+0x3c/0x110
[ 99.418554] el0t_64_sync_handler+0x120/0x130
[ 99.418788] el0t_64_sync+0x194/0x198
[ 99.418994] Code: aa0003e3 d000a3e0 91310000 97f49bdb (d4210000)
Issue is reproduced when generic_listxattr() returns 'system.nfs4_acl',
thus calling lisxattr() with size = 16 will trigger the bug.
Add check on nfs4_listxattr() to return ERANGE error when it is
called with size > 0 and the return value is greater than size.
Fixes: 012a211abd5d ("NFSv4.2: hook in the user extended attribute handlers")
Signed-off-by: Jorge Mora <mora@netapp.com>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 037e56a22ff37f9a9c2330b66cff55d3d1ff9b90 ]
Once the client has processed the CB_LAYOUTRECALL, but has not yet
successfully returned the layout, the server is supposed to switch to
returning NFS4ERR_RETURNCONFLICT. This patch ensures that we handle
that return value correctly.
Fixes: 183d9e7b112a ("pnfs: rework LAYOUTGET retry handling")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1530827b90025cdf80c9b0d07a166d045a0a7b81 ]
The error path for blocklayout's device lookup is missing a reference drop
for the case where a lookup finds the device, but the device is marked with
NFS_DEVICEID_UNAVAILABLE.
Fixes: b3dce6a2f060 ("pnfs/blocklayout: handle transient devices")
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5cc7688bae7f0757c39c1d3dfdd827b724061067 ]
If the client is doing pnfs IO and Kerberos is configured and EXCHANGEID
successfully negotiated SP4_MACH_CRED and WRITE/COMMIT are on the
list of state protected operations, then we need to make sure to
choose the DS's rpc_client structure instead of the MDS's one.
Fixes: fb91fb0ee7b2 ("NFS: Move call to nfs4_state_protect_write() to nfs4_write_setup()")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit f63955721a8020e979b99cc417dcb6da3106aa24 upstream.
We are not allowed to call pnfs_mark_matching_lsegs_return() without
also holding a reference to the layout header, since doing so could lead
to the reference count going to zero when we call
pnfs_layout_remove_lseg(). This again can lead to a hang when we get to
nfs4_evict_inode() and are unable to clear the layout pointer.
pnfs_layout_return_unused_byserver() is guilty of this behaviour, and
has been seen to trigger the refcount warning prior to a hang.
Fixes: b6d49ecd1081 ("NFSv4: Fix a pNFS layout related use-after-free race when freeing the inode")
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit ed1cc05aa1f7fe8197d300e914afc28ab9818f89 ]
If the NFS4CLNT_RUN_MANAGER flag got set just before we cleared
NFS4CLNT_MANAGER_RUNNING, then we might have won the race against
nfs4_schedule_state_manager(), and are responsible for handling the
recovery situation.
Fixes: aeabb3c96186 ("NFSv4: Fix a NFSv4 state manager deadlock")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
