summaryrefslogtreecommitdiff
path: root/fs/nfs/nfs4_fs.h
AgeCommit message (Collapse)AuthorFilesLines
2013-02-12NFSv4: Ensure delegation recall and byte range lock removal don't conflictTrond Myklebust1-0/+1
Add a mutex to the struct nfs4_state_owner to ensure that delegation recall doesn't conflict with byte range lock removal. Note that we nest the new mutex _outside_ the state manager reclaim protection (nfsi->rwsem) in order to avoid deadlocks. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-02-12NFSv4: Allow the state manager to mark an open_owner as being recoveredTrond Myklebust1-0/+3
This patch adds a seqcount_t lock for use by the state manager to signal that an open owner has been recovered. This mechanism will be used by the delegation, open and byte range lock code in order to figure out if they need to replay requests due to collisions with lock recovery. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-12-11Merge branch 'bugfixes' into nfs-for-nextTrond Myklebust1-1/+1
2012-12-06NFSv4.1: Remove the 'FIFO' behaviour for nfs41_setup_sequenceTrond Myklebust1-1/+0
It is more important to preserve the task priority behaviour, which ensures that things like reclaim writes take precedence over background and kupdate writes. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-12-06NFSv4: Simplify the NFSv4/v4.1 synchronous call switchTrond Myklebust1-2/+1
We shouldn't need to pass the 'cache_reply' parameter if we initialise the sequence_args/sequence_res in the caller. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-12-06NFSv4.1: Simplify the sequence setupTrond Myklebust1-0/+1
Nobody calls nfs4_setup_sequence or nfs41_setup_sequence without also calling rpc_call_start() on success. This commit therefore folds the rpc_call_start call into nfs41_setup_sequence(). Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-12-06NFSv4.1: Ping server when our session table limits are too highTrond Myklebust1-0/+1
If the server requests a lower target_highest_slotid, then ensure that we ping it with at least one RPC call containing an appropriate SEQUENCE op. This ensures that the server won't need to send a recall callback in order to shrink the slot table. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-12-06NFSv4.1: Move slot table and session struct definitions to nfs4session.hTrond Myklebust1-12/+0
Clean up. Gather NFSv4.1 slot definitions in fs/nfs/nfs4session.h. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-12-06NFSv4.1: Cleanup move session slot management to fs/nfs/nfs4session.cTrond Myklebust1-11/+0
NFSv4.1 session management is getting complex enough to deserve a separate file. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-12-06NFSv4: Move nfs4_wait_clnt_recover and nfs4_client_recover_expired_leaseTrond Myklebust1-0/+4
nfs4_wait_clnt_recover and nfs4_client_recover_expired_lease are both generic state related functions. As such, they belong in nfs4state.c, and not nfs4proc.c Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-12-06NFSv4.1: Clean up session drainingTrond Myklebust1-0/+8
Coalesce nfs4_check_drain_bc_complete and nfs4_check_drain_fc_complete into a single function that can be called when the slot table is known to be empty, then change nfs4_callback_free_slot() and nfs4_free_slot() to use it. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-12-06NFSv4.1: CB_RECALL_SLOT must schedule a sequence op after updating targetsTrond Myklebust1-0/+1
RFC5661 requires us to make sure that the server knows we've updated our slot table size by sending at least one SEQUENCE op containing the new 'highest_slotid' value. We can do so using the 'CHECK_LEASE' functionality of the state manager. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-12-06NFSv4.1: Remove the state manager code to resize the slot tableTrond Myklebust1-4/+0
The state manager no longer needs any special machinery to stop the session flow and resize the slot table. It is all done on the fly by the SEQUENCE op code now. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-12-06NFSv4.1: Allow SEQUENCE to resize the slot table on the flyTrond Myklebust1-2/+2
Instead of an array of slots, use a singly linked list of slots that can be dynamically appended to or shrunk. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-12-06NFSv4.1: Fix nfs4_callback_recallslot to work with dynamic slot allocationTrond Myklebust1-0/+2
Ensure that the NFSv4.1 CB_RECALL_SLOT callback updates the slot table target max slotid safely. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-11-27NFSv4.1: Shrink struct nfs4_sequence_res by moving the session pointerTrond Myklebust1-1/+2
Move the session pointer into the slot table, then have struct nfs4_slot point to that slot table. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-11-22NFSv4: Fix a compile time warning when #undef CONFIG_NFS_V4_1Trond Myklebust1-1/+1
The function nfs4_get_machine_cred_locked is used by NFSv4.0 routines too. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-11-21NFSv4.1: clean up nfs4_recall_slot to use nfs4_alloc_slotsTrond Myklebust1-0/+2
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-10-02NFS: Add nfs4_unique_id boot parameterChuck Lever1-0/+3
An optional boot parameter is introduced to allow client administrators to specify a string that the Linux NFS client can insert into its nfs_client_id4 id string, to make it both more globally unique, and to ensure that it doesn't change even if the client's nodename changes. If this boot parameter is not specified, the client's nodename is used, as before. Client installation procedures can create a unique string (typically, a UUID) which remains unchanged during the lifetime of that client instance. This works just like creating a UUID for the label of the system's root and boot volumes. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-10-02NFS: Discover NFSv4 server trunking when mountingChuck Lever1-0/+8
"Server trunking" is a fancy named for a multi-homed NFS server. Trunking might occur if a client sends NFS requests for a single workload to multiple network interfaces on the same server. There are some implications for NFSv4 state management that make it useful for a client to know if a single NFSv4 server instance is multi-homed. (Note this is only a consideration for NFSv4, not for legacy versions of NFS, which are stateless). If a client cares about server trunking, no NFSv4 operations can proceed until that client determines who it is talking to. Thus server IP trunking discovery must be done when the client first encounters an unfamiliar server IP address. The nfs_get_client() function walks the nfs_client_list and matches on server IP address. The outcome of that walk tells us immediately if we have an unfamiliar server IP address. It invokes nfs_init_client() in this case. Thus, nfs4_init_client() is a good spot to perform trunking discovery. Discovery requires a client to establish a fresh client ID, so our client will now send SETCLIENTID or EXCHANGE_ID as the first NFS operation after a successful ping, rather than waiting for an application to perform an operation that requires NFSv4 state. The exact process for detecting trunking is different for NFSv4.0 and NFSv4.1, so a minorversion-specific init_client callout method is introduced. CLID_INUSE recovery is important for the trunking discovery process. CLID_INUSE is a sign the server recognizes the client's nfs_client_id4 id string, but the client is using the wrong principal this time for the SETCLIENTID operation. The SETCLIENTID must be retried with a series of different principals until one works, and then the rest of trunking discovery can proceed. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-09-29NFSv4.1: Simplify the pNFS return-on-close codeTrond Myklebust1-1/+1
Confine it to the nfs4_do_close() code. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-09-29NFSv4: Convert the nfs4_lock_state->ls_flags to a bit fieldTrond Myklebust1-2/+2
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-09-29NFS: Clean up helper function nfs4_select_rw_stateid()Trond Myklebust1-1/+1
We want to be able to pass on the information that the page was not dirtied under a lock. Instead of adding a flag parameter, do this by passing a pointer to a 'struct nfs_lock_owner' that may be NULL. Also reuse this structure in struct nfs_lock_context to carry the fl_owner_t and pid_t. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-08-17NFS: Fix a regression when loading the NFS v4 modulebjschuma@gmail.com1-0/+3
Some systems have a modprobe.d/nfs.conf file that sets an nfs4 alias pointing to nfs.ko, rather than nfs4.ko. This can prevent the v4 module from loading on mount, since the kernel sees that something named "nfs4" has already been loaded. To work around this, I've renamed the modules to "nfsv2.ko" "nfsv3.ko" and "nfsv4.ko". I also had to move the nfs4_fs_type back to nfs.ko to ensure that `mount -t nfs4` still works. Signed-off-by: Bryan Schumaker <bjschuma@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-07-31NFS: Convert v4 into a moduleBryan Schumaker1-3/+2
This patch exports symbols needed by the v4 module. In addition, I also switch over to using IS_ENABLED() to check if CONFIG_NFS_V4 or CONFIG_NFS_V4_MODULE are set. The module (nfs4.ko) will be created in the same directory as nfs.ko and will be automatically loaded the first time you try to mount over NFS v4. Signed-off-by: Bryan Schumaker <bjschuma@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-07-31NFS: Keep module parameters in the generic NFS clientBryan Schumaker1-1/+3
Otherwise we break backwards compatibility when v4 becomes a modules. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-07-31NFS: Split out remaining NFS v4 inode functionsBryan Schumaker1-3/+0
Somehow I missed this in my previous patch series, but these functions are only needed by the v4 code and should be moved to a v4-only file. I wasn't exactly sure where I should put these functions, so I moved them into nfs4super.c where I could make them static. Signed-off-by: Bryan Schumaker <bjschuma@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-07-31NFS: Create a try_mount rpc opBryan Schumaker1-1/+1
I'm already looking up the nfs subversion in nfs_fs_mount(), so I have easy access to rpc_ops that used to be difficult to reach. This allows me to set up a different mount path for NFS v2/3 and NFS v4. Signed-off-by: Bryan Schumaker <bjschuma@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-07-31NFS: Add version registering frameworkBryan Schumaker1-0/+1
This patch adds in the code to track multiple versions of the NFS protocol. I created default structures for v2, v3 and v4 so that each version can continue to work while I convert them into kernel modules. I also removed the const parameter from the rpc_version array so that I can change it at runtime. Signed-off-by: Bryan Schumaker <bjschuma@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-07-31nfs: fix stub return type warningsRandy Dunlap1-1/+1
Fix numerous repeated warnings by making the stub function void instead of non-void: fs/nfs/nfs4_fs.h: In function 'nfs4_unregister_sysctl': fs/nfs/nfs4_fs.h:385:1: warning: no return statement in function returning non-void Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-07-17NFS: Split out the NFS v4 filesystem typesBryan Schumaker1-0/+2
This allows me to move the v4 mounting and unmounting functions out of the generic client and into a file that is only compiled when CONFIG_NFS_V4 is enabled. Signed-off-by: Bryan Schumaker <bjschuma@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-07-17NFS: Initialize v4 sysctls from nfs_init_v4()Bryan Schumaker1-0/+15
And split them out of the generic client into their own file. Signed-off-by: Bryan Schumaker <bjschuma@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-07-17NFS: Create an init_nfs_v4() functionBryan Schumaker1-0/+4
I want to initialize all of NFS v4 in a single function that will eventually be used as the v4 module init function. Signed-off-by: Bryan Schumaker <bjschuma@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-07-17NFS: Split out NFS v4 inode operationsBryan Schumaker1-1/+4
The NFS v4 file inode operations are already already in nfs4proc.c, so this patch just needs to move the directory operations to the same file. Signed-off-by: Bryan Schumaker <bjschuma@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-06-29NFS: Create custom NFS v4 write_inode() functionBryan Schumaker1-0/+3
This gives pnfs a chance to do a layout commit inside the v4 code. Signed-off-by: Bryan Schumaker <bjschuma@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-06-29NFS: Create an alloc_client rpc_opBryan Schumaker1-0/+2
This gives NFS v4 a way to set up callbacks and sessions without v2 or v3 having to do them as well. Signed-off-by: Bryan Schumaker <bjschuma@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-06-29NFS: Create a free_client rpc_opBryan Schumaker1-0/+2
NFS v4 needs a way to shut down callbacks and sessions, but v2 and v3 don't. Signed-off-by: Bryan Schumaker <bjschuma@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-06-05NFSv4: Fix an Oops in the open recovery codeTrond Myklebust1-1/+1
The open recovery code does not need to request a new value for the mdsthreshold, and so does not allocate a struct nfs4_threshold. The problem is that encode_getfattr_open() will still request an mdsthreshold, and so we end up Oopsing in decode_attr_mdsthreshold. This patch fixes encode_getfattr_open so that it doesn't request an mdsthreshold when the caller isn't asking for one. It also fixes decode_attr_mdsthreshold so that it errors if the server returns an mdsthreshold that we didn't ask for (instead of Oopsing). Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Andy Adamson <andros@netapp.com>
2012-05-27NFSv4.1: Handle other occurrences of NFS4ERR_CONN_NOT_BOUND_TO_SESSIONTrond Myklebust1-2/+2
Let nfs4_schedule_session_recovery() handle the details of choosing between resetting the session, and other session related recovery. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-05-26NFSv4.1: Add DESTROY_CLIENTIDTrond Myklebust1-0/+1
Ensure that we destroy our lease on last unmount Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-05-26NFSv4.1: Ensure we use the correct credentials for bind_conn_to_sessionTrond Myklebust1-1/+1
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Weston Andros Adamson <dros@netapp.com>
2012-05-26NFSv4.1: Ensure we use the correct credentials for session create/destroyTrond Myklebust1-2/+2
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-05-25nfs41: Use BIND_CONN_TO_SESSION for CB_PATH_DOWN*Weston Andros Adamson1-0/+1
The state manager can handle SEQ4_STATUS_CB_PATH_DOWN* flags with a BIND_CONN_TO_SESSION instead of destroying the session and creating a new one. Signed-off-by: Weston Andros Adamson <dros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-05-25nfs4.1: add BIND_CONN_TO_SESSION operationWeston Andros Adamson1-0/+1
This patch adds the BIND_CONN_TO_SESSION operation which is needed for upcoming SP4_MACH_CRED work and useful for recovering from broken connections without destroying the session. Signed-off-by: Weston Andros Adamson <dros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-05-23NFS: Force server to drop NFSv4 stateChuck Lever1-0/+1
nfs4_reset_all_state() refreshes the boot verifier a server sees to trigger that server to wipe this client's state. This function is invoked when an NFSv4.1 server reports that it has revoked some or all of a client's NFSv4 state. To facilitate server trunking discovery, we will eventually want to move the cl_boot_time field to a more global structure. The Uniform Client String model (and specifically, server trunking detection) requires that all servers see the same boot verifier until the client actually does reboot, and not a fresh verifier every time the client unmounts and remounts the server. Without the cl_boot_time field, however, nfs4_reset_all_state() will have to find some other way to force the server to purge the client's NFSv4 state. Because these verifiers are opaque (ie, the server doesn't know or care that they happen to be timestamps), we can force the server to wipe NFSv4 state by updating the boot verifier as we do now, then immediately afterwards establish a fresh client ID using the old boot verifier again. Hopefully there are no extra paranoid server implementations that keep track of the client's boot verifiers and prevent clients from reusing a previous one. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-05-23NFS: Remove nfs_unique_idChuck Lever1-5/+0
Clean up: this structure is unused. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-05-23NFS: Use proper naming conventions for NFSv4.1 server scope fieldsChuck Lever1-1/+1
Clean up: When naming fields and data types, follow established conventions to facilitate accurate grep/cscope searches. Additionally, for consistency, move the scope field into the NFSv4- specific part of the nfs_client, and free that memory in the logic that shuts down NFSv4 nfs_clients. Introduced by commit 99fe60d0 "nfs41: exchange_id operation", April 1 2009. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-05-15NFS: Rename nfs4_proc_get_root()Bryan Schumaker1-0/+1
This function is really getting the root filehandle and not the root dentry of the filesystem. I also removed the rpc_ops lookup from nfs4_get_rootfh() under the assumption that if we reach this function then we already know we are using NFS v4. Signed-off-by: Bryan Schumaker <bjschuma@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-04-27NFS: Create a submount rpc_opBryan Schumaker1-0/+2
This simplifies the code for v2 and v3 and gives v4 a chance to decide on referrals without needing to modify the generic client. Signed-off-by: Bryan Schumaker <bjschuma@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-04-27NFS: Remove secinfo knowledge out of the generic clientBryan Schumaker1-0/+1
And also remove the unneeded rpc_op. Signed-off-by: Bryan Schumaker <bjschuma@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-11 14:45:58 +0300