summaryrefslogtreecommitdiff
path: root/fs/cifs/smbdirect.c
AgeCommit message (Collapse)AuthorFilesLines
2023-02-21cifs: Build the RDMA SGE list directly from an iteratorDavid Howells1-91/+62
In the depths of the cifs RDMA code, extract part of an iov iterator directly into an SGE list without going through an intermediate scatterlist. Note that this doesn't support extraction from an IOBUF- or UBUF-type iterator (ie. user-supplied buffer). The assumption is that the higher layers will extract those to a BVEC-type iterator first and do whatever is required to stop the pages from going away. Signed-off-by: David Howells <dhowells@redhat.com> cc: Steve French <sfrench@samba.org> cc: Shyam Prasad N <nspmangalore@gmail.com> cc: Rohith Surabattula <rohiths.msft@gmail.com> cc: Tom Talpey <tom@talpey.com> cc: Jeff Layton <jlayton@kernel.org> cc: linux-cifs@vger.kernel.org cc: linux-rdma@vger.kernel.org Link: https://lore.kernel.org/r/166697260361.61150.5064013393408112197.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/166732032518.3186319.1859601819981624629.stgit@warthog.procyon.org.uk/ # rfc Signed-off-by: Steve French <stfrench@microsoft.com>
2023-02-21cifs: Change the I/O paths to use an iterator rather than a page listDavid Howells1-165/+97
Currently, the cifs I/O paths hand lists of pages from the VM interface routines at the top all the way through the intervening layers to the socket interface at the bottom. This is a problem, however, for interfacing with netfslib which passes an iterator through to the ->issue_read() method (and will pass an iterator through to the ->issue_write() method in future). Netfslib takes over bounce buffering for direct I/O, async I/O and encrypted content, so cifs doesn't need to do that. Netfslib also converts IOVEC-type iterators into BVEC-type iterators if necessary. Further, cifs needs foliating - and folios may come in a variety of sizes, so a page list pointing to an array of heterogeneous pages may cause problems in places such as where crypto is done. Change the cifs I/O paths to hand iov_iter iterators all the way through instead. Notes: (1) Some old routines are #if'd out to be removed in a follow up patch so as to avoid confusing diff, thereby making the diff output easier to follow. I've removed functions that don't overlap with anything added. (2) struct smb_rqst loses rq_pages, rq_offset, rq_npages, rq_pagesz and rq_tailsz which describe the pages forming the buffer; instead there's an rq_iter describing the source buffer and an rq_buffer which is used to hold the buffer for encryption. (3) struct cifs_readdata and cifs_writedata are similarly modified to smb_rqst. The ->read_into_pages() and ->copy_into_pages() are then replaced with passing the iterator directly to the socket. The iterators are stored in these structs so that they are persistent and don't get deallocated when the function returns (unlike if they were stack variables). (4) Buffered writeback is overhauled, borrowing the code from the afs filesystem to gather up contiguous runs of folios. The XARRAY-type iterator is then used to refer directly to the pagecache and can be passed to the socket to transmit data directly from there. This includes: cifs_extend_writeback() cifs_write_back_from_locked_folio() cifs_writepages_region() cifs_writepages() (5) Pages are converted to folios. (6) Direct I/O uses netfs_extract_user_iter() to create a BVEC-type iterator from an IOBUF/UBUF-type source iterator. (7) smb2_get_aead_req() uses netfs_extract_iter_to_sg() to extract page fragments from the iterator into the scatterlists that the crypto layer prefers. (8) smb2_init_transform_rq() attached pages to smb_rqst::rq_buffer, an xarray, to use as a bounce buffer for encryption. An XARRAY-type iterator can then be used to pass the bounce buffer to lower layers. Signed-off-by: David Howells <dhowells@redhat.com> cc: Steve French <sfrench@samba.org> cc: Shyam Prasad N <nspmangalore@gmail.com> cc: Rohith Surabattula <rohiths.msft@gmail.com> cc: Paulo Alcantara <pc@cjr.nz> cc: Jeff Layton <jlayton@kernel.org> cc: linux-cifs@vger.kernel.org Link: https://lore.kernel.org/r/164311907995.2806745.400147335497304099.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/164928620163.457102.11602306234438271112.stgit@warthog.procyon.org.uk/ # v1 Link: https://lore.kernel.org/r/165211420279.3154751.15923591172438186144.stgit@warthog.procyon.org.uk/ # v1 Link: https://lore.kernel.org/r/165348880385.2106726.3220789453472800240.stgit@warthog.procyon.org.uk/ # v1 Link: https://lore.kernel.org/r/165364827111.3334034.934805882842932881.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/166126396180.708021.271013668175370826.stgit@warthog.procyon.org.uk/ # v1 Link: https://lore.kernel.org/r/166697259595.61150.5982032408321852414.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/166732031756.3186319.12528413619888902872.stgit@warthog.procyon.org.uk/ # rfc Signed-off-by: Steve French <stfrench@microsoft.com>
2023-02-21cifs: Add a function to build an RDMA SGE list from an iteratorDavid Howells1-0/+214
Add a function to add elements onto an RDMA SGE list representing page fragments extracted from a BVEC-, KVEC- or XARRAY-type iterator and DMA mapped until the maximum number of elements is reached. Nothing is done to make sure the pages remain present - that must be done by the caller. Signed-off-by: David Howells <dhowells@redhat.com> cc: Steve French <sfrench@samba.org> cc: Shyam Prasad N <nspmangalore@gmail.com> cc: Rohith Surabattula <rohiths.msft@gmail.com> cc: Tom Talpey <tom@talpey.com> cc: Jeff Layton <jlayton@kernel.org> cc: linux-cifs@vger.kernel.org cc: linux-fsdevel@vger.kernel.org cc: linux-rdma@vger.kernel.org Link: https://lore.kernel.org/r/166697256704.61150.17388516338310645808.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/166732028840.3186319.8512284239779728860.stgit@warthog.procyon.org.uk/ # rfc Signed-off-by: Steve French <stfrench@microsoft.com>
2023-02-20cifs: Fix warning and UAF when destroy the MR listZhang Xiaoxu1-1/+2
If the MR allocate failed, the MR recovery work not initialized and list not cleared. Then will be warning and UAF when release the MR: WARNING: CPU: 4 PID: 824 at kernel/workqueue.c:3066 __flush_work.isra.0+0xf7/0x110 CPU: 4 PID: 824 Comm: mount.cifs Not tainted 6.1.0-rc5+ #82 RIP: 0010:__flush_work.isra.0+0xf7/0x110 Call Trace: <TASK> __cancel_work_timer+0x2ba/0x2e0 smbd_destroy+0x4e1/0x990 _smbd_get_connection+0x1cbd/0x2110 smbd_get_connection+0x21/0x40 cifs_get_tcp_session+0x8ef/0xda0 mount_get_conns+0x60/0x750 cifs_mount+0x103/0xd00 cifs_smb3_do_mount+0x1dd/0xcb0 smb3_get_tree+0x1d5/0x300 vfs_get_tree+0x41/0xf0 path_mount+0x9b3/0xdd0 __x64_sys_mount+0x190/0x1d0 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 BUG: KASAN: use-after-free in smbd_destroy+0x4fc/0x990 Read of size 8 at addr ffff88810b156a08 by task mount.cifs/824 CPU: 4 PID: 824 Comm: mount.cifs Tainted: G W 6.1.0-rc5+ #82 Call Trace: dump_stack_lvl+0x34/0x44 print_report+0x171/0x472 kasan_report+0xad/0x130 smbd_destroy+0x4fc/0x990 _smbd_get_connection+0x1cbd/0x2110 smbd_get_connection+0x21/0x40 cifs_get_tcp_session+0x8ef/0xda0 mount_get_conns+0x60/0x750 cifs_mount+0x103/0xd00 cifs_smb3_do_mount+0x1dd/0xcb0 smb3_get_tree+0x1d5/0x300 vfs_get_tree+0x41/0xf0 path_mount+0x9b3/0xdd0 __x64_sys_mount+0x190/0x1d0 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Allocated by task 824: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 __kasan_kmalloc+0x7a/0x90 _smbd_get_connection+0x1b6f/0x2110 smbd_get_connection+0x21/0x40 cifs_get_tcp_session+0x8ef/0xda0 mount_get_conns+0x60/0x750 cifs_mount+0x103/0xd00 cifs_smb3_do_mount+0x1dd/0xcb0 smb3_get_tree+0x1d5/0x300 vfs_get_tree+0x41/0xf0 path_mount+0x9b3/0xdd0 __x64_sys_mount+0x190/0x1d0 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Freed by task 824: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 kasan_save_free_info+0x2a/0x40 ____kasan_slab_free+0x143/0x1b0 __kmem_cache_free+0xc8/0x330 _smbd_get_connection+0x1c6a/0x2110 smbd_get_connection+0x21/0x40 cifs_get_tcp_session+0x8ef/0xda0 mount_get_conns+0x60/0x750 cifs_mount+0x103/0xd00 cifs_smb3_do_mount+0x1dd/0xcb0 smb3_get_tree+0x1d5/0x300 vfs_get_tree+0x41/0xf0 path_mount+0x9b3/0xdd0 __x64_sys_mount+0x190/0x1d0 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Let's initialize the MR recovery work before MR allocate to prevent the warning, remove the MRs from the list to prevent the UAF. Fixes: c7398583340a ("CIFS: SMBD: Implement RDMA memory registration") Acked-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Reviewed-by: Tom Talpey <tom@talpey.com> Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2023-02-20cifs: Fix lost destroy smbd connection when MR allocate failedZhang Xiaoxu1-0/+1
If the MR allocate failed, the smb direct connection info is NULL, then smbd_destroy() will directly return, then the connection info will be leaked. Let's set the smb direct connection info to the server before call smbd_destroy(). Fixes: c7398583340a ("CIFS: SMBD: Implement RDMA memory registration") Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com> Acked-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Reviewed-by: David Howells <dhowells@redhat.com> Reviewed-by: Tom Talpey <tom@talpey.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2023-01-25cifs: Fix oops due to uncleared server->smbd_conn in reconnectDavid Howells1-0/+1
In smbd_destroy(), clear the server->smbd_conn pointer after freeing the smbd_connection struct that it points to so that reconnection doesn't get confused. Fixes: 8ef130f9ec27 ("CIFS: SMBD: Implement function to destroy a SMB Direct connection") Cc: stable@vger.kernel.org Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Acked-by: Tom Talpey <tom@talpey.com> Signed-off-by: David Howells <dhowells@redhat.com> Cc: Long Li <longli@microsoft.com> Cc: Pavel Shilovsky <piastryyy@gmail.com> Cc: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-10-05Fix formatting of client smbdirect RDMA loggingTom Talpey1-7/+7
Make the debug logging more consistent in formatting of addresses, lengths, and bitfields. Acked-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Tom Talpey <tom@talpey.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-10-05Handle variable number of SGEs in client smbdirect send.Tom Talpey1-108/+77
If/when an outgoing request contains more scatter/gather segments than can be mapped in a single RDMA send work request, use smbdirect fragments to send it in multiple packets. Acked-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Tom Talpey <tom@talpey.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-10-05Reduce client smbdirect max receive segment sizeTom Talpey1-1/+1
Reduce client smbdirect max segment receive size to 1364 to match protocol norms. Larger buffers are unnecessary and add significant memory overhead. Acked-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Tom Talpey <tom@talpey.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-10-05Decrease the number of SMB3 smbdirect client SGEsTom Talpey1-14/+12
The client-side SMBDirect layer requires no more than 6 send SGEs and 1 receive SGE. The previous default of 8 send and 8 receive causes smbdirect to fail on the SoftiWARP (siw) provider, and possibly others. Additionally, large numbers of SGEs reduces performance significantly on adapter implementations. Also correct the frmr page count comment (not an SGE count). Acked-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Tom Talpey <tom@talpey.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-06-01cifs: fix potential deadlock in direct reclaimVincent Whitchurch1-2/+2
The srv_mutex is used during writeback so cifs should ensure that allocations done when that mutex is held are done with GFP_NOFS, to avoid having direct reclaim ending up waiting for the same mutex and causing a deadlock. This is detected by lockdep with the splat below: ====================================================== WARNING: possible circular locking dependency detected 5.18.0 #70 Not tainted ------------------------------------------------------ kswapd0/49 is trying to acquire lock: ffff8880195782e0 (&tcp_ses->srv_mutex){+.+.}-{3:3}, at: compound_send_recv but task is already holding lock: ffffffffa98e66c0 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (fs_reclaim){+.+.}-{0:0}: fs_reclaim_acquire kmem_cache_alloc_trace __request_module crypto_alg_mod_lookup crypto_alloc_tfm_node crypto_alloc_shash cifs_alloc_hash smb311_crypto_shash_allocate smb311_update_preauth_hash compound_send_recv cifs_send_recv SMB2_negotiate smb2_negotiate cifs_negotiate_protocol cifs_get_smb_ses cifs_mount cifs_smb3_do_mount smb3_get_tree vfs_get_tree path_mount __x64_sys_mount do_syscall_64 entry_SYSCALL_64_after_hwframe -> #0 (&tcp_ses->srv_mutex){+.+.}-{3:3}: __lock_acquire lock_acquire __mutex_lock mutex_lock_nested compound_send_recv cifs_send_recv SMB2_write smb2_sync_write cifs_write cifs_writepage_locked cifs_writepage shrink_page_list shrink_lruvec shrink_node balance_pgdat kswapd kthread ret_from_fork other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(fs_reclaim); lock(&tcp_ses->srv_mutex); lock(fs_reclaim); lock(&tcp_ses->srv_mutex); *** DEADLOCK *** 1 lock held by kswapd0/49: #0: ffffffffa98e66c0 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat stack backtrace: CPU: 2 PID: 49 Comm: kswapd0 Not tainted 5.18.0 #70 Call Trace: <TASK> dump_stack_lvl dump_stack print_circular_bug.cold check_noncircular __lock_acquire lock_acquire __mutex_lock mutex_lock_nested compound_send_recv cifs_send_recv SMB2_write smb2_sync_write cifs_write cifs_writepage_locked cifs_writepage shrink_page_list shrink_lruvec shrink_node balance_pgdat kswapd kthread ret_from_fork </TASK> Fix this by using the memalloc_nofs_save/restore APIs around the places where the srv_mutex is held. Do this in a wrapper function for the lock/unlock of the srv_mutex, and rename the srv_mutex to avoid missing call sites in the conversion. Note that there is another lockdep warning involving internal crypto locks, which was masked by this problem and is visible after this fix, see the discussion in this thread: https://lore.kernel.org/all/20220523123755.GA13668@axis.com/ Link: https://lore.kernel.org/r/CANT5p=rqcYfYMVHirqvdnnca4Mo+JQSw5Qu12v=kPfpk5yhhmg@mail.gmail.com/ Reported-by: Shyam Prasad N <nspmangalore@gmail.com> Suggested-by: Lars Persson <larper@axis.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Reviewed-by: Enzo Matsumiya <ematsumiya@suse.de> Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-05-28Merge tag '5.19-rc-smb3-client-fixes-updated' of ↵Linus Torvalds1-1/+1
git://git.samba.org/sfrench/cifs-2.6 Pull cifs client updates from Steve French: - multichannel fixes to improve reconnect after network failure - improved caching of root directory contents (extending benefit of directory leases) - two DFS fixes - three fixes for improved debugging - an NTLMSSP fix for mounts t0 older servers - new mount parm to allow disabling creating sparse files - various cleanup fixes and minor fixes pointed out by coverity * tag '5.19-rc-smb3-client-fixes-updated' of git://git.samba.org/sfrench/cifs-2.6: (24 commits) smb3: remove unneeded null check in cifs_readdir cifs: fix ntlmssp on old servers cifs: cache the dirents for entries in a cached directory cifs: avoid parallel session setups on same channel cifs: use new enum for ses_status cifs: do not use tcpStatus after negotiate completes smb3: add mount parm nosparse smb3: don't set rc when used and unneeded in query_info_compound smb3: check for null tcon cifs: fix minor compile warning Add various fsctl structs Add defines for various newer FSCTLs smb3: add trace point for oplock not found cifs: return the more nuanced writeback error on close() smb3: add trace point for lease not found issue cifs: smbd: fix typo in comment cifs: set the CREATE_NOT_FILE when opening the directory in use_cached_dir() cifs: check for smb1 in open_cached_dir() cifs: move definition of cifs_fattr earlier in cifsglob.h cifs: print TIDs as hex ...
2022-05-22cifs: smbd: fix typo in commentJulia Lawall1-1/+1
Spelling mistake (triple letters) in comment. Detected with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-04-06RDMA: Split kernel-only global device caps from uverbs device capsJason Gunthorpe1-1/+1
Split out flags from ib_device::device_cap_flags that are only used internally to the kernel into kernel_cap_flags that is not part of the uapi. This limits the device_cap_flags to being the same bitmap that will be copied to userspace. This cleanly splits out the uverbs flags from the kernel flags to avoid confusion in the flags bitmap. Add some short comments describing which each of the kernel flags is connected to. Remove unused kernel flags. Link: https://lore.kernel.org/r/0-v2-22c19e565eef+139a-kern_caps_jgg@nvidia.com Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-06-22smbdirect: missing rc checks while waiting for rdma eventsSteve French1-2/+12
There were two places where we weren't checking for error (e.g. ERESTARTSYS) while waiting for rdma resolution. Addresses-Coverity: 1462165 ("Unchecked return value") Reviewed-by: Tom Talpey <tom@talpey.com> Reviewed-by: Long Li <longli@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2020-12-14cifs: Fix fall-through warnings for ClangGustavo A. R. Silva1-0/+1
In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple warnings by explicitly adding multiple break/goto statements instead of just letting the code fall through to the next case. Link: https://github.com/KSPP/linux/issues/115 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2020-06-01cifs: Standardize logging outputJoe Perches1-99/+66
Use pr_fmt to standardize all logging for fs/cifs. Some logging output had no CIFS: specific prefix. Now all output has one of three prefixes: o CIFS: o CIFS: VFS: o Root-CIFS: Miscellanea: o Convert printks to pr_<level> o Neaten macro definitions o Remove embedded CIFS: prefixes from formats o Convert "illegal" to "invalid" o Coalesce formats o Add missing '\n' format terminations o Consolidate multiple cifs_dbg continuations into single calls o More consistent use of upper case first word output logging o Multiline statement argument alignment and wrapping Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2020-04-07cifs: smbd: Do not schedule work to send immediate packet on every receiveLong Li1-51/+10
Immediate packets should only be sent to peer when there are new receive credits made available. New credits show up on freeing receive buffer, not on receiving data. Fix this by avoid unnenecessary work schedules. Signed-off-by: Long Li <longli@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2020-04-07cifs: smbd: Properly process errors on ib_post_sendLong Li1-123/+97
When processing errors from ib_post_send(), the transport state needs to be rolled back to the condition before the error. Refactor the old code to make it easy to roll back on IB errors, and fix this. Signed-off-by: Long Li <longli@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2020-04-07cifs: smbd: Update receive credits before sending and deal with credits roll ↵Long Li1-7/+18
back on failure before sending Recevie credits should be updated before sending the packet, not before a work is scheduled. Also, the value needs roll back if something fails and cannot send. Signed-off-by: Long Li <longli@microsoft.com> Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2020-04-07cifs: smbd: Check send queue size before posting a sendLong Li1-1/+10
Sometimes the remote peer may return more send credits than the send queue depth. If all the send credits are used to post senasd, we may overflow the send queue. Fix this by checking the send queue size before posting a send. Signed-off-by: Long Li <longli@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2020-04-07cifs: smbd: Merge code to track pending packetsLong Li1-30/+10
As an optimization, SMBD tries to track two types of packets: packets with payload and without payload. There is no obvious benefit or performance gain to separately track two types of packets. Just treat them as pending packets and merge the tracking code. Signed-off-by: Long Li <longli@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2020-03-30cifs: smbd: Check and extend sender credits in interrupt contextLong Li1-23/+15
When a RDMA packet is received and server is extending send credits, we should check and unblock senders immediately in IRQ context. Doing it in a worker queue causes unnecessary delay and doesn't save much CPU on the receive path. Signed-off-by: Long Li <longli@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2020-03-30cifs: smbd: Calculate the correct maximum packet size for segmented ↵Long Li1-2/+1
SMBDirect send/receive The packet size needs to take account of SMB2 header size and possible encryption header size. This is only done when signing is used and it is for RDMA send/receive, not read/write. Also remove the dead SMBD code in smb2_negotiate_r(w)size. Signed-off-by: Long Li <longli@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-11-25cifs: smbd: Only queue work for error recovery on memory registrationLong Li1-11/+15
It's not necessary to queue invalidated memory registration to work queue, as all we need to do is to unmap the SG and make it usable again. This can save CPU cycles in normal data paths as memory registration errors are rare and normally only happens during reconnection. Signed-off-by: Long Li <longli@microsoft.com> Cc: stable@vger.kernel.org Signed-off-by: Steve French <stfrench@microsoft.com>
2019-11-25cifs: smbd: Return -ECONNABORTED when trasnport is not in connected stateLong Li1-1/+1
The transport should return this error so the upper layer will reconnect. Signed-off-by: Long Li <longli@microsoft.com> Cc: stable@vger.kernel.org Signed-off-by: Steve French <stfrench@microsoft.com>
2019-11-25cifs: smbd: Add messages on RDMA session destroy and reconnectionLong Li1-2/+4
Log these activities to help production support. Signed-off-by: Long Li <longli@microsoft.com> Cc: stable@vger.kernel.org Signed-off-by: Steve French <stfrench@microsoft.com>
2019-11-25cifs: smbd: Return -EINVAL when the number of iovs exceeds SMBDIRECT_MAX_SGELong Li1-1/+1
While it's not friendly to fail user processes that issue more iovs than we support, at least we should return the correct error code so the user process gets a chance to retry with smaller number of iovs. Signed-off-by: Long Li <longli@microsoft.com> Cc: stable@vger.kernel.org Signed-off-by: Steve French <stfrench@microsoft.com>
2019-08-05rdma: Enable ib_alloc_cq to spread work over a device's comp_vectorsChuck Lever1-4/+6
Send and Receive completion is handled on a single CPU selected at the time each Completion Queue is allocated. Typically this is when an initiator instantiates an RDMA transport, or when a target accepts an RDMA connection. Some ULPs cannot open a connection per CPU to spread completion workload across available CPUs and MSI vectors. For such ULPs, provide an API that allows the RDMA core to select a completion vector based on the device's complement of available comp_vecs. ULPs that invoke ib_alloc_cq() with only comp_vector 0 are converted to use the new API so that their completion workloads interfere less with each other. Suggested-by: Håkon Bugge <haakon.bugge@oracle.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Cc: <linux-cifs@vger.kernel.org> Cc: <v9fs-developer@lists.sourceforge.net> Link: https://lore.kernel.org/r/20190729171923.13428.52555.stgit@manet.1015granger.net Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157Thomas Gleixner1-10/+1
Based on 3 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [graeme] [gregory] [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema] [hk] [hemahk]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1105 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-15cifs:smbd Use the correct DMA direction when sending dataLong Li1-3/+5
When sending data, use the DMA_TO_DEVICE to map buffers. Also log the number of requests in a compounding request from upper layer. Signed-off-by: Long Li <longli@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com> Acked-by: Pavel Shilovsky <pshilov@microsoft.com> Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
2019-05-08cifs: smbd: take an array of reqeusts when sending upper layer dataLong Li1-27/+28
To support compounding, __smb_send_rqst() now sends an array of requests to the transport layer. Change smbd_send() to take an array of requests, and send them in as few packets as possible. Signed-off-by: Long Li <longli@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com> CC: Stable <stable@vger.kernel.org>
2019-05-08cifs: smbd: Indicate to retry on transport sending failureLong Li1-2/+3
Failure to send a packet doesn't mean it's a permanent failure, it can't be returned to user process. This I/O should be retried or failed based on server packet response and transport health. This logic is handled by the upper layer. Give this decision to upper layer. Signed-off-by: Long Li <longli@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-05-08cifs: smbd: Return EINTR when interruptedLong Li1-1/+1
When packets are waiting for outbound I/O and interrupted, return the proper error code to user process. Signed-off-by: Long Li <longli@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-05-08cifs: smbd: Don't destroy transport on RDMA disconnectLong Li1-113/+7
Now upper layer is handling the transport shutdown and reconnect, remove the code that handling transport shutdown on RDMA disconnect. Signed-off-by: Long Li <longli@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-05-08smbd: Make upper layer decide when to destroy the transportLong Li1-20/+94
On transport recoonect, upper layer CIFS code destroys the current transport and then recoonect. This code path is not used by SMBD, in that SMBD destroys its transport on RDMA disconnect notification independent of CIFS upper layer behavior. This approach adds some costs to SMBD layer to handle transport shutdown and restart, and to deal with several racing conditions on reconnecting transport. Re-work this code path by introducing a new smbd_destroy. This function is called form upper layer to ask SMBD to destroy the transport. SMBD will no longer need to destroy the transport by itself while worrying about data transfer is in progress. The upper layer guarantees the transport is locked. change log: v2: fix build errors when CONFIG_CIFS_SMB_DIRECT is not configured Signed-off-by: Long Li <longli@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-03-05cifs: replace snprintf with scnprintfRonnie Sahlberg1-3/+3
a trivial patch that replaces all use of snprintf with scnprintf. scnprintf() is generally seen as a safer function to use than snprintf for many use cases. In our case, there is no actual difference between the two since we never look at the return value. Thus we did not have any of the bugs that scnprintf protects against and the patch does nothing. However, for people reading our code it will be a receipt that we have done our due dilligence and checked our code for this type of bugs. See the presentation "Making C Less Dangerous In The Linux Kernel" at this years LCA Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2018-12-12RDMA: Start use ib_device_opsKamal Heib1-1/+1
Make all the required change to start use the ib_device_ops structure. Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-11-02Merge branch 'work.afs' of ↵Linus Torvalds1-4/+13
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull AFS updates from Al Viro: "AFS series, with some iov_iter bits included" * 'work.afs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (26 commits) missing bits of "iov_iter: Separate type from direction and use accessor functions" afs: Probe multiple fileservers simultaneously afs: Fix callback handling afs: Eliminate the address pointer from the address list cursor afs: Allow dumping of server cursor on operation failure afs: Implement YFS support in the fs client afs: Expand data structure fields to support YFS afs: Get the target vnode in afs_rmdir() and get a callback on it afs: Calc callback expiry in op reply delivery afs: Fix FS.FetchStatus delivery from updating wrong vnode afs: Implement the YFS cache manager service afs: Remove callback details from afs_callback_break struct afs: Commit the status on a new file/dir/symlink afs: Increase to 64-bit volume ID and 96-bit vnode ID for YFS afs: Don't invoke the server to read data beyond EOF afs: Add a couple of tracepoints to log I/O errors afs: Handle EIO from delivery function afs: Fix TTL on VL server and address lists afs: Implement VL server rotation afs: Improve FS server rotation error handling ...
2018-10-24CIFS: SMBD: Do not call ib_dereg_mr on invalidated memory registrationLong Li1-19/+19
It is not necessary to deregister a memory registration after it has been successfully invalidated. Signed-off-by: Long Li <longli@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2018-10-24iov_iter: Use accessor functionDavid Howells1-4/+13
Use accessor functions to access an iterator's type and direction. This allows for the possibility of using some other method of determining the type of iterator than if-chains with bitwise-AND conditions. Signed-off-by: David Howells <dhowells@redhat.com>
2018-08-16Merge tag 'v4.18' into rdma.git for-nextJason Gunthorpe1-15/+7
Resolve merge conflicts from the -rc cycle against the rdma.git tree: Conflicts: drivers/infiniband/core/uverbs_cmd.c - New ifs added to ib_uverbs_ex_create_flow in -rc and for-next - Merge removal of file->ucontext in for-next with new code in -rc drivers/infiniband/core/uverbs_main.c - for-next removed code from ib_uverbs_write() that was modified in for-rc Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-07-25fs/cifs: Simplify ib_post_(send|recv|srq_recv)() callsBart Van Assche1-10/+9
Instead of declaring and passing a dummy 'bad_wr' pointer, pass NULL as third argument to ib_post_(send|recv|srq_recv)(). Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-07-05cifs: fix SMB1 breakageRonnie Sahlberg1-2/+3
SMB1 mounting broke in commit 35e2cc1ba755 ("cifs: Use correct packet length in SMB2_TRANSFORM header") Fix it and also rename smb2_rqst_len to smb_rqst_len to make it less unobvious that the function is also called from CIFS/SMB1 Good job by Paulo reviewing and cleaning up Ronnie's original patch. Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Reviewed-by: Paulo Alcantara <palcantara@suse.de> Signed-off-by: Steve French <stfrench@microsoft.com>
2018-06-18IB/core: add max_send_sge and max_recv_sge attributesSteve Wise1-3/+10
This patch replaces the ib_device_attr.max_sge with max_send_sge and max_recv_sge. It allows ulps to take advantage of devices that have very different send and recv sge depths. For example cxgb4 has a max_recv_sge of 4, yet a max_send_sge of 16. Splitting out these attributes allows much more efficient use of the SQ for cxgb4 with ulps that use the RDMA_RW API. Consider a large RDMA WRITE that has 16 scattergather entries. With max_sge of 4, the ulp would send 4 WRITE WRs, but with max_sge of 16, it can be done with 1 WRITE WR. Acked-by: Sagi Grimberg <sagi@grimberg.me> Acked-by: Christoph Hellwig <hch@lst.de> Acked-by: Selvin Xavier <selvin.xavier@broadcom.com> Acked-by: Shiraz Saleem <shiraz.saleem@intel.com> Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-06-16cifs: Use correct packet length in SMB2_TRANSFORM headerPaulo Alcantara1-14/+5
In smb3_init_transform_rq(), 'orig_len' was only counting the request length, but forgot to count any data pages in the request. Writing or creating files with the 'seal' mount option was broken. In addition, do some code refactoring by exporting smb2_rqst_len() to calculate the appropriate packet size and avoid duplicating the same calculation all over the code. The start of the io vector is either the rfc1002 length (4 bytes) or a SMB2 header which is always > 4. Use this fact to check and skip the rfc1002 length if requested. Signed-off-by: Paulo Alcantara <palcantara@suse.de> Reviewed-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2018-06-06CIFS: SMBD: Support page offset in memory registrationLong Li1-31/+45
Change code to pass the correct page offset during memory registration for RDMA read/write. Signed-off-by: Long Li <longli@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2018-06-06CIFS: SMBD: Support page offset in RDMA recvLong Li1-7/+11
RDMA recv function needs to place data to the correct place starting at page offset. Signed-off-by: Long Li <longli@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2018-06-06CIFS: SMBD: Support page offset in RDMA sendLong Li1-8/+19
The RDMA send function needs to look at offset in the request pages, and send data starting from there. Signed-off-by: Long Li <longli@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2018-04-25cifs: smbd: Avoid allocating iov on the stackLong Li1-24/+12
It's not necessary to allocate another iov when going through the buffers in smbd_send() through RDMA send. Remove it to reduce stack size. Thanks to Matt for spotting a printk typo in the earlier version of this. CC: Matt Redfearn <matt.redfearn@mips.com> Signed-off-by: Long Li <longli@microsoft.com> Acked-by: Ronnie Sahlberg <lsahlber@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Steve French <smfrench@gmail.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-09 13:56:31 +0300