summaryrefslogtreecommitdiff
path: root/fs/ceph/snap.c
AgeCommit message (Collapse)AuthorFilesLines
2021-04-28ceph: fix up some bare fetches of i_sizeJeff Layton1-1/+1
We need to use i_size_read(), which properly handles the torn read case on 32-bit arches. Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2021-02-16ceph: defer flushing the capsnap if the Fb is usedXiubo Li1-0/+10
If the Fb cap is used it means the current inode is flushing the dirty data to OSD, just defer flushing the capsnap. URL: https://tracker.ceph.com/issues/48640 Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-11-04ceph: check session state after bumping session->s_seqJeff Layton1-1/+1
Some messages sent by the MDS entail a session sequence number increment, and the MDS will drop certain types of requests on the floor when the sequence numbers don't match. In particular, a REQUEST_CLOSE message can cross with one of the sequence morphing messages from the MDS which can cause the client to stall, waiting for a response that will never come. Originally, this meant an up to 5s delay before the recurring workqueue job kicked in and resent the request, but a recent change made it so that the client would never resend, causing a 60s stall unmounting and sometimes a blockisting event. Add a new helper for incrementing the session sequence and then testing to see whether a REQUEST_CLOSE needs to be resent, and move the handling of CEPH_MDS_SESSION_CLOSING into that function. Change all of the bare sequence counter increments to use the new helper. Reorganize check_session_state with a switch statement. It should no longer be called when the session is CLOSING, so throw a warning if it ever is (but still handle that case sanely). [ idryomov: whitespace, pr_err() call fixup ] URL: https://tracker.ceph.com/issues/47563 Fixes: fa9967734227 ("ceph: fix potential mdsc use-after-free crash") Reported-by: Patrick Donnelly <pdonnell@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Xiubo Li <xiubli@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-10-12ceph: add ceph_sb_to_mdsc helper support to parse the mdscXiubo Li1-1/+1
This will help simplify the code. [ jlayton: fix minor merge conflict in quota.c ] Signed-off-by: Xiubo Li <xiubli@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-03-23ceph: fix memory leak in ceph_cleanup_snapid_map()Luis Henriques1-0/+1
kmemleak reports the following memory leak: unreferenced object 0xffff88821feac8a0 (size 96): comm "kworker/1:0", pid 17, jiffies 4294896362 (age 20.512s) hex dump (first 32 bytes): a0 c8 ea 1f 82 88 ff ff 00 c9 ea 1f 82 88 ff ff ................ 00 00 00 00 00 00 00 00 00 01 00 00 00 00 ad de ................ backtrace: [<00000000b3ea77fb>] ceph_get_snapid_map+0x75/0x2a0 [<00000000d4060942>] fill_inode+0xb26/0x1010 [<0000000049da6206>] ceph_readdir_prepopulate+0x389/0xc40 [<00000000e2fe2549>] dispatch+0x11ab/0x1521 [<000000007700b894>] ceph_con_workfn+0xf3d/0x3240 [<0000000039138a41>] process_one_work+0x24d/0x590 [<00000000eb751f34>] worker_thread+0x4a/0x3d0 [<000000007e8f0d42>] kthread+0xfb/0x130 [<00000000d49bd1fa>] ret_from_fork+0x3a/0x50 A kfree is missing while looping the 'to_free' list of ceph_snapid_map objects. Cc: stable@vger.kernel.org Fixes: 75c9627efb72 ("ceph: map snapid to anonymous bdev ID") Signed-off-by: Luis Henriques <lhenriques@suse.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-08-22ceph: fix buffer free while holding i_ceph_lock in __ceph_build_xattrs_blob()Luis Henriques1-1/+3
Calling ceph_buffer_put() in __ceph_build_xattrs_blob() may result in freeing the i_xattrs.blob buffer while holding the i_ceph_lock. This can be fixed by having this function returning the old blob buffer and have the callers of this function freeing it when the lock is released. The following backtrace was triggered by fstests generic/117. BUG: sleeping function called from invalid context at mm/vmalloc.c:2283 in_atomic(): 1, irqs_disabled(): 0, pid: 649, name: fsstress 4 locks held by fsstress/649: #0: 00000000a7478e7e (&type->s_umount_key#19){++++}, at: iterate_supers+0x77/0xf0 #1: 00000000f8de1423 (&(&ci->i_ceph_lock)->rlock){+.+.}, at: ceph_check_caps+0x7b/0xc60 #2: 00000000562f2b27 (&s->s_mutex){+.+.}, at: ceph_check_caps+0x3bd/0xc60 #3: 00000000f83ce16a (&mdsc->snap_rwsem){++++}, at: ceph_check_caps+0x3ed/0xc60 CPU: 1 PID: 649 Comm: fsstress Not tainted 5.2.0+ #439 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58-prebuilt.qemu.org 04/01/2014 Call Trace: dump_stack+0x67/0x90 ___might_sleep.cold+0x9f/0xb1 vfree+0x4b/0x60 ceph_buffer_release+0x1b/0x60 __ceph_build_xattrs_blob+0x12b/0x170 __send_cap+0x302/0x540 ? __lock_acquire+0x23c/0x1e40 ? __mark_caps_flushing+0x15c/0x280 ? _raw_spin_unlock+0x24/0x30 ceph_check_caps+0x5f0/0xc60 ceph_flush_dirty_caps+0x7c/0x150 ? __ia32_sys_fdatasync+0x20/0x20 ceph_sync_fs+0x5a/0x130 iterate_supers+0x8f/0xf0 ksys_sync+0x4f/0xb0 __ia32_sys_sync+0xa/0x10 do_syscall_64+0x50/0x1c0 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7fc6409ab617 Signed-off-by: Luis Henriques <lhenriques@suse.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-07-08ceph: handle change_attr in cap messagesJeff Layton1-0/+2
Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-07-08ceph: handle btime in cap messagesJeff Layton1-0/+1
Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-06-05ceph: avoid iput_final() while holding mutex or in dispatch threadYan, Zheng1-5/+11
iput_final() may wait for reahahead pages. The wait can cause deadlock. For example: Workqueue: ceph-msgr ceph_con_workfn [libceph] Call Trace: schedule+0x36/0x80 io_schedule+0x16/0x40 __lock_page+0x101/0x140 truncate_inode_pages_range+0x556/0x9f0 truncate_inode_pages_final+0x4d/0x60 evict+0x182/0x1a0 iput+0x1d2/0x220 iterate_session_caps+0x82/0x230 [ceph] dispatch+0x678/0xa80 [ceph] ceph_con_workfn+0x95b/0x1560 [libceph] process_one_work+0x14d/0x410 worker_thread+0x4b/0x460 kthread+0x105/0x140 ret_from_fork+0x22/0x40 Workqueue: ceph-msgr ceph_con_workfn [libceph] Call Trace: __schedule+0x3d6/0x8b0 schedule+0x36/0x80 schedule_preempt_disabled+0xe/0x10 mutex_lock+0x2f/0x40 ceph_check_caps+0x505/0xa80 [ceph] ceph_put_wrbuffer_cap_refs+0x1e5/0x2c0 [ceph] writepages_finish+0x2d3/0x410 [ceph] __complete_request+0x26/0x60 [libceph] handle_reply+0x6c8/0xa10 [libceph] dispatch+0x29a/0xbb0 [libceph] ceph_con_workfn+0x95b/0x1560 [libceph] process_one_work+0x14d/0x410 worker_thread+0x4b/0x460 kthread+0x105/0x140 ret_from_fork+0x22/0x40 In above example, truncate_inode_pages_range() waits for readahead pages while holding s_mutex. ceph_check_caps() waits for s_mutex and blocks OSD dispatch thread. Later OSD replies (for readahead) can't be handled. ceph_check_caps() also may lock snap_rwsem for read. So similar deadlock can happen if iput_final() is called while holding snap_rwsem. In general, it's not good to call iput_final() inside MDS/OSD dispatch threads or while holding any mutex. The fix is introducing ceph_async_iput(), which calls iput_final() in workqueue. Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-04-23ceph: fix ci->i_head_snapc leakYan, Zheng1-1/+6
We missed two places that i_wrbuffer_ref_head, i_wr_ref, i_dirty_caps and i_flushing_caps may change. When they are all zeros, we should free i_head_snapc. Cc: stable@vger.kernel.org Link: https://tracker.ceph.com/issues/38224 Reported-and-tested-by: Luis Henriques <lhenriques@suse.com> Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-05ceph: map snapid to anonymous bdev IDYan, Zheng1-2/+154
ceph_getattr() return zero dev ID for head inodes and set dev ID to snapid directly for snaphost inodes. This is not good because userspace utilities may consider device ID of 0 as invalid, snapid may conflict with other device's ID. This patch introduces "snapids to anonymous bdev IDs" map. we create a new mapping when we see a snapid for the first time. we trim unused mapping after it is ilde for 5 minutes. Link: http://tracker.ceph.com/issues/22353 Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Acked-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-05ceph: split large reconnect into multiple messagesYan, Zheng1-0/+3
Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-02-18ceph: avoid repeatedly adding inode to mdsc->snap_flush_listYan, Zheng1-1/+2
Otherwise, mdsc->snap_flush_list may get corrupted. Cc: stable@vger.kernel.org Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-08-02ceph: use timespec64 for inode timestampArnd Bergmann1-3/+3
Since the vfs structures are all using timespec64, we can now change the internal representation, using ceph_encode_timespec64 and ceph_decode_timespec64. In case of ceph_aux_inode however, we need to avoid doing a memcmp() on uninitialized padding data, so the members of the i_mtime field get copied individually into 64-bit integers. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-06-06vfs: change inode times to use struct timespec64Deepa Dinamani1-3/+3
struct timespec is not y2038 safe. Transition vfs to use y2038 safe struct timespec64 instead. The change was made with the help of the following cocinelle script. This catches about 80% of the changes. All the header file and logic changes are included in the first 5 rules. The rest are trivial substitutions. I avoid changing any of the function signatures or any other filesystem specific data structures to keep the patch simple for review. The script can be a little shorter by combining different cases. But, this version was sufficient for my usecase. virtual patch @ depends on patch @ identifier now; @@ - struct timespec + struct timespec64 current_time ( ... ) { - struct timespec now = current_kernel_time(); + struct timespec64 now = current_kernel_time64(); ... - return timespec_trunc( + return timespec64_trunc( ... ); } @ depends on patch @ identifier xtime; @@ struct \( iattr \| inode \| kstat \) { ... - struct timespec xtime; + struct timespec64 xtime; ... } @ depends on patch @ identifier t; @@ struct inode_operations { ... int (*update_time) (..., - struct timespec t, + struct timespec64 t, ...); ... } @ depends on patch @ identifier t; identifier fn_update_time =~ "update_time$"; @@ fn_update_time (..., - struct timespec *t, + struct timespec64 *t, ...) { ... } @ depends on patch @ identifier t; @@ lease_get_mtime( ... , - struct timespec *t + struct timespec64 *t ) { ... } @te depends on patch forall@ identifier ts; local idexpression struct inode *inode_node; identifier i_xtime =~ "^i_[acm]time$"; identifier ia_xtime =~ "^ia_[acm]time$"; identifier fn_update_time =~ "update_time$"; identifier fn; expression e, E3; local idexpression struct inode *node1; local idexpression struct inode *node2; local idexpression struct iattr *attr1; local idexpression struct iattr *attr2; local idexpression struct iattr attr; identifier i_xtime1 =~ "^i_[acm]time$"; identifier i_xtime2 =~ "^i_[acm]time$"; identifier ia_xtime1 =~ "^ia_[acm]time$"; identifier ia_xtime2 =~ "^ia_[acm]time$"; @@ ( ( - struct timespec ts; + struct timespec64 ts; | - struct timespec ts = current_time(inode_node); + struct timespec64 ts = current_time(inode_node); ) <+... when != ts ( - timespec_equal(&inode_node->i_xtime, &ts) + timespec64_equal(&inode_node->i_xtime, &ts) | - timespec_equal(&ts, &inode_node->i_xtime) + timespec64_equal(&ts, &inode_node->i_xtime) | - timespec_compare(&inode_node->i_xtime, &ts) + timespec64_compare(&inode_node->i_xtime, &ts) | - timespec_compare(&ts, &inode_node->i_xtime) + timespec64_compare(&ts, &inode_node->i_xtime) | ts = current_time(e) | fn_update_time(..., &ts,...) | inode_node->i_xtime = ts | node1->i_xtime = ts | ts = inode_node->i_xtime | <+... attr1->ia_xtime ...+> = ts | ts = attr1->ia_xtime | ts.tv_sec | ts.tv_nsec | btrfs_set_stack_timespec_sec(..., ts.tv_sec) | btrfs_set_stack_timespec_nsec(..., ts.tv_nsec) | - ts = timespec64_to_timespec( + ts = ... -) | - ts = ktime_to_timespec( + ts = ktime_to_timespec64( ...) | - ts = E3 + ts = timespec_to_timespec64(E3) | - ktime_get_real_ts(&ts) + ktime_get_real_ts64(&ts) | fn(..., - ts + timespec64_to_timespec(ts) ,...) ) ...+> ( <... when != ts - return ts; + return timespec64_to_timespec(ts); ...> ) | - timespec_equal(&node1->i_xtime1, &node2->i_xtime2) + timespec64_equal(&node1->i_xtime2, &node2->i_xtime2) | - timespec_equal(&node1->i_xtime1, &attr2->ia_xtime2) + timespec64_equal(&node1->i_xtime2, &attr2->ia_xtime2) | - timespec_compare(&node1->i_xtime1, &node2->i_xtime2) + timespec64_compare(&node1->i_xtime1, &node2->i_xtime2) | node1->i_xtime1 = - timespec_trunc(attr1->ia_xtime1, + timespec64_trunc(attr1->ia_xtime1, ...) | - attr1->ia_xtime1 = timespec_trunc(attr2->ia_xtime2, + attr1->ia_xtime1 = timespec64_trunc(attr2->ia_xtime2, ...) | - ktime_get_real_ts(&attr1->ia_xtime1) + ktime_get_real_ts64(&attr1->ia_xtime1) | - ktime_get_real_ts(&attr.ia_xtime1) + ktime_get_real_ts64(&attr.ia_xtime1) ) @ depends on patch @ struct inode *node; struct iattr *attr; identifier fn; identifier i_xtime =~ "^i_[acm]time$"; identifier ia_xtime =~ "^ia_[acm]time$"; expression e; @@ ( - fn(node->i_xtime); + fn(timespec64_to_timespec(node->i_xtime)); | fn(..., - node->i_xtime); + timespec64_to_timespec(node->i_xtime)); | - e = fn(attr->ia_xtime); + e = fn(timespec64_to_timespec(attr->ia_xtime)); ) @ depends on patch forall @ struct inode *node; struct iattr *attr; identifier i_xtime =~ "^i_[acm]time$"; identifier ia_xtime =~ "^ia_[acm]time$"; identifier fn; @@ { + struct timespec ts; <+... ( + ts = timespec64_to_timespec(node->i_xtime); fn (..., - &node->i_xtime, + &ts, ...); | + ts = timespec64_to_timespec(attr->ia_xtime); fn (..., - &attr->ia_xtime, + &ts, ...); ) ...+> } @ depends on patch forall @ struct inode *node; struct iattr *attr; struct kstat *stat; identifier ia_xtime =~ "^ia_[acm]time$"; identifier i_xtime =~ "^i_[acm]time$"; identifier xtime =~ "^[acm]time$"; identifier fn, ret; @@ { + struct timespec ts; <+... ( + ts = timespec64_to_timespec(node->i_xtime); ret = fn (..., - &node->i_xtime, + &ts, ...); | + ts = timespec64_to_timespec(node->i_xtime); ret = fn (..., - &node->i_xtime); + &ts); | + ts = timespec64_to_timespec(attr->ia_xtime); ret = fn (..., - &attr->ia_xtime, + &ts, ...); | + ts = timespec64_to_timespec(attr->ia_xtime); ret = fn (..., - &attr->ia_xtime); + &ts); | + ts = timespec64_to_timespec(stat->xtime); ret = fn (..., - &stat->xtime); + &ts); ) ...+> } @ depends on patch @ struct inode *node; struct inode *node2; identifier i_xtime1 =~ "^i_[acm]time$"; identifier i_xtime2 =~ "^i_[acm]time$"; identifier i_xtime3 =~ "^i_[acm]time$"; struct iattr *attrp; struct iattr *attrp2; struct iattr attr ; identifier ia_xtime1 =~ "^ia_[acm]time$"; identifier ia_xtime2 =~ "^ia_[acm]time$"; struct kstat *stat; struct kstat stat1; struct timespec64 ts; identifier xtime =~ "^[acmb]time$"; expression e; @@ ( ( node->i_xtime2 \| attrp->ia_xtime2 \| attr.ia_xtime2 \) = node->i_xtime1 ; | node->i_xtime2 = \( node2->i_xtime1 \| timespec64_trunc(...) \); | node->i_xtime2 = node->i_xtime1 = node->i_xtime3 = \(ts \| current_time(...) \); | node->i_xtime1 = node->i_xtime3 = \(ts \| current_time(...) \); | stat->xtime = node2->i_xtime1; | stat1.xtime = node2->i_xtime1; | ( node->i_xtime2 \| attrp->ia_xtime2 \) = attrp->ia_xtime1 ; | ( attrp->ia_xtime1 \| attr.ia_xtime1 \) = attrp2->ia_xtime2; | - e = node->i_xtime1; + e = timespec64_to_timespec( node->i_xtime1 ); | - e = attrp->ia_xtime1; + e = timespec64_to_timespec( attrp->ia_xtime1 ); | node->i_xtime1 = current_time(...); | node->i_xtime2 = node->i_xtime1 = node->i_xtime3 = - e; + timespec_to_timespec64(e); | node->i_xtime1 = node->i_xtime3 = - e; + timespec_to_timespec64(e); | - node->i_xtime1 = e; + node->i_xtime1 = timespec_to_timespec64(e); ) Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Cc: <anton@tuxera.com> Cc: <balbi@kernel.org> Cc: <bfields@fieldses.org> Cc: <darrick.wong@oracle.com> Cc: <dhowells@redhat.com> Cc: <dsterba@suse.com> Cc: <dwmw2@infradead.org> Cc: <hch@lst.de> Cc: <hirofumi@mail.parknet.co.jp> Cc: <hubcap@omnibond.com> Cc: <jack@suse.com> Cc: <jaegeuk@kernel.org> Cc: <jaharkes@cs.cmu.edu> Cc: <jslaby@suse.com> Cc: <keescook@chromium.org> Cc: <mark@fasheh.com> Cc: <miklos@szeredi.hu> Cc: <nico@linaro.org> Cc: <reiserfs-devel@vger.kernel.org> Cc: <richard@nod.at> Cc: <sage@redhat.com> Cc: <sfrench@samba.org> Cc: <swhiteho@redhat.com> Cc: <tj@kernel.org> Cc: <trond.myklebust@primarydata.com> Cc: <tytso@mit.edu> Cc: <viro@zeniv.linux.org.uk>
2018-04-02ceph: quota: cache inode pointer in ceph_snap_realmLuis Henriques1-0/+2
Keep a pointer to the inode in struct ceph_snap_realm. This allows to optimize functions that walk the realms hierarchy (e.g. in quotas). Signed-off-by: Luis Henriques <lhenriques@suse.com> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-01-29ceph: fix incorrect snaprealm when adding capsYan, Zheng1-2/+6
Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-02ceph: properly queue cap snap for newly created snap realmYan, Zheng1-5/+3
commit 3ae0bebc "ceph: queue cap snap only when snap realm's context changes" introduced a regression: we may not call queue_realm_cap_snaps() for newly created snap realm. This regression allows unflushed snapshot data to be overwritten. Link: http://tracker.ceph.com/issues/21483 Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-09-06ceph: queue cap snap only when snap realm's context changesYan, Zheng1-21/+16
If we create capsnap when snap realm's context does not change, the new capsnap's snapc is equal to ci->i_head_snapc. Page writeback code can't differentiates dirty pages associated with the new capsnap from dirty pages associated with i_head_snapc. Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-05-04ceph: convert ceph_cap_snap.nref from atomic_t to refcount_tElena Reshetova1-1/+1
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-12-13ceph: record truncate size/seq for snap data writebackYan, Zheng1-0/+2
Dirty snapshot data needs to be flushed unconditionally. If they were created before truncation, writeback should use old truncate size/seq. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-07-28ceph: cleanup ceph_flush_snaps()Yan, Zheng1-3/+1
This patch devide __ceph_flush_snaps() into two stags. In the first stage, __ceph_flush_snaps() assign snapcaps flush TIDs and add them to cap flush lists. __ceph_flush_snaps() keeps holding the i_ceph_lock in this stagge. So inode's auth cap can not change. In the second stage, __ceph_flush_snaps() send flushsnap cap messages. i_ceph_lock is unlocked before sending each cap message. If auth cap changes in the middle, __ceph_flush_snaps() just stops. This is OK because kick_flushing_inode_caps() will re-send flushsnap cap messages to inode's new auth MDS. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-07-28ceph: introduce an inode flag to indicates if snapflush is neededYan, Zheng1-0/+2
Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-07-28ceph: unify cap flush and snapcap flushYan, Zheng1-3/+1
This patch includes following changes - Assign flush tid to snapcap flush - Remove session's s_cap_snaps_flushing list. Add inode to session's s_cap_flushing list instead. Inode is removed from the list when there is no pending snapcap flush or cap flush. - make __kick_flushing_caps() re-send both snapcap flushes and cap flushes. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-07-28ceph: fix NULL dereference in ceph_queue_cap_snap()Yan, Zheng1-1/+1
old_snapc->seq is used in dout(...) Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-03-25ceph: kill ceph_empty_snapcIlya Dryomov1-16/+0
ceph_empty_snapc->num_snaps == 0 at all times. Passing such a snapc to ceph_osdc_alloc_request() (possibly through ceph_osdc_new_request()) is equivalent to passing NULL, as ceph_osdc_alloc_request() uses it only for sizing the request message. Further, in all four cases the subsequent ceph_osdc_build_request() is passed NULL for snapc, meaning that 0 is encoded for seq and num_snaps and making ceph_empty_snapc entirely useless. The two cases where it actually mattered were removed in commits 860560904962 ("ceph: avoid sending unnessesary FLUSHSNAP message") and 23078637e054 ("ceph: fix queuing inode to mdsdir's snaprealm"). Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Yan, Zheng <zyan@redhat.com>
2015-09-08ceph: fix queuing inode to mdsdir's snaprealmYan, Zheng1-7/+0
During MDS failovers, MClientSnap message may cause kclient to move some inodes from root directory's snaprealm to mdsdir's snaprealm and queue snapshots for these inodes. For a FS has never created any snapshot, both root directory's snaprealm and mdsdir's snaprealm share the same snapshot contexts (both are ceph_empty_snapc). This confuses ceph_put_wrbuffer_cap_refs(), make it unable to distinguish snapshot buffers from head buffers. The fix is do not use ceph_empty_snapc as snaprealm's cached context. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-06-25ceph: make sure syncfs flushes all cap snapsYan, Zheng1-0/+2
Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-06-25ceph: avoid sending unnessesary FLUSHSNAP messageYan, Zheng1-12/+37
when a snap notification contains no new snapshot, we can avoid sending FLUSHSNAP message to MDS. But we still need to create cap_snap in some case because it's required by write path and page writeback path Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-06-25ceph: set i_head_snapc when getting CEPH_CAP_FILE_WR referenceYan, Zheng1-60/+66
In most cases that snap context is needed, we are holding reference of CEPH_CAP_FILE_WR. So we can set ceph inode's i_head_snapc when getting the CEPH_CAP_FILE_WR reference, and make codes get snap context from i_head_snapc. This makes the code simpler. Another benefit of this change is that we can handle snap notification more elegantly. Especially when snap context is updated while someone else is doing write. The old queue cap_snap code may set cap_snap's context to ether the old context or the new snap context, depending on if i_head_snapc is set. The new queue capp_snap code always set cap_snap's context to the old snap context. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-06-25ceph: use empty snap context for uninline_data and get_pool_permYan, Zheng1-9/+9
Cached_context in ceph_snap_realm is directly accessed by uninline_data() and get_pool_perm(). This is racy in theory. both uninline_data() and get_pool_perm() do not modify existing object, they only create new object. So we can pass the empty snap context to them. Unlike cached_context in ceph_snap_realm, we do not need to protect the empty snap context. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-02-19ceph: improve reference tracking for snaprealmYan, Zheng1-16/+38
When snaprealm is created, its initial reference count is zero. But in some rare cases, the newly created snaprealm is not referenced by anyone. This causes snaprealm with zero reference count not freed. The fix is set reference count of newly snaprealm to 1. The reference is return the function who requests to create the snaprealm. When the function finishes its job, it releases the reference. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2014-12-17ceph: flush inline versionYan, Zheng1-0/+2
After converting inline data to normal data, client need to flush the new i_inline_version (CEPH_INLINE_NONE) to MDS. This commit makes cap messages (sent to MDS) contain inline_version and inline_data. Client always converts inline data to normal data before data write, so the inline data length part is always zero. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2014-12-17ceph: introduce global empty snap contextYan, Zheng1-1/+25
Current snaphost code does not properly handle moving inode from one empty snap realm to another empty snap realm. After changing inode's snap realm, some dirty pages' snap context can be not equal to inode's i_head_snap. This can trigger BUG() in ceph_put_wrbuffer_cap_refs() The fix is introduce a global empty snap context for all empty snap realm. This avoids triggering the BUG() for filesystem with no snapshot. Fixes: http://tracker.ceph.com/issues/9928 Signed-off-by: Yan, Zheng <zyan@redhat.com> Reviewed-by: Ilya Dryomov <idryomov@redhat.com>
2014-12-17ceph, rbd: delete unnecessary checks before two function callsSF Markus Elfring1-6/+3
The functions ceph_put_snap_context() and iput() test whether their argument is NULL and then return immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> [idryomov@redhat.com: squashed rbd.c hunk, changelog] Signed-off-by: Ilya Dryomov <idryomov@redhat.com>
2013-05-02ceph: use ceph_create_snap_context()Alex Elder1-2/+1
Now that we have a library routine to create snap contexts, use it. This is part of: http://tracker.ceph.com/issues/4857 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-07-31ceph: define snap counts as u32 everywhereAlex Elder1-8/+10
There are two structures in which a count of snapshots are maintained: struct ceph_snap_context { ... u32 num_snaps; ... } and struct ceph_snap_realm { ... u32 num_prior_parent_snaps; /* had prior to parent_since */ ... u32 num_snaps; ... } These fields never take on negative values (e.g., to hold special meaning), and so are really inherently unsigned. Furthermore they take their value from over-the-wire or on-disk formatted 32-bit values. So change their definition to have type u32, and change some spots elsewhere in the code to account for this change. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-06-01introduce SIZE_MAXXi Wang1-1/+1
ULONG_MAX is often used to check for integer overflow when calculating allocation size. While ULONG_MAX happens to work on most systems, there is no guarantee that `size_t' must be the same size as `long'. This patch introduces SIZE_MAX, the maximum value of `size_t', to improve portability and readability for allocation size validation. Signed-off-by: Xi Wang <xi.wang@gmail.com> Acked-by: Alex Elder <elder@dreamhost.com> Cc: David Airlie <airlied@linux.ie> Cc: Pekka Enberg <penberg@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-22ceph: fix overflow check in build_snap_context()Xi Wang1-1/+1
The overflow check for a + n * b should be (n > (ULONG_MAX - a) / b), rather than (n > ULONG_MAX / b - a). Signed-off-by: Xi Wang <xi.wang@gmail.com> Signed-off-by: Sage Weil <sage@newdream.net>
2011-12-07ceph: use i_ceph_lock instead of i_lockSage Weil1-8/+8
We have been using i_lock to protect all kinds of data structures in the ceph_inode_info struct, including lists of inodes that we need to iterate over while avoiding races with inode destruction. That requires grabbing a reference to the inode with the list lock protected, but igrab() now takes i_lock to check the inode flags. Changing the list lock ordering would be a painful process. However, using a ceph-specific i_ceph_lock in the ceph inode instead of i_lock is a simple mechanical change and avoids the ordering constraints imposed by igrab(). Reported-by: Amon Ott <a.ott@m-privacy.de> Signed-off-by: Sage Weil <sage@newdream.net>
2011-07-26ceph: only queue capsnap if caps are dirtySage Weil1-4/+2
We used to go into this branch if i_wrbuffer_ref_head was non-zero. This was an ancient check from before we were careful about dealing with all kinds of caps (and not just dirty pages). It is cleaner to only queue a capsnap if there is an actual dirty cap. If we are racing with... something...we will end up here with ci->i_wrbuffer_refs but no dirty caps. Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2011-07-26ceph: fix snap writeback when racing with writesSage Weil1-3/+20
There are two problems that come up when we try to queue a capsnap while a write is in progress: - The FILE_WR cap is held, but not yet dirty, so we may queue a capsnap with dirty == 0. That will crash later in __ceph_flush_snaps(). Or on the FILE_WR cap if a write is in progress. - We may not have i_head_snapc set, which causes problems pretty quickly. Look to the snaprealm in this case. Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2011-06-08ceph: use ihold when we already have an inode refSage Weil1-1/+1
We should use ihold whenever we already have a stable inode ref, even when we aren't holding i_lock. This avoids adding new and unnecessary locking dependencies. Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-11ceph: fix list_add in ceph_put_snap_realmHenry C Chang1-1/+1
Signed-off-by: Henry C Chang <henry.cy.chang@gmail.com> Signed-off-by: Sage Weil <sage@newdream.net>
2011-03-31Fix common misspellingsLucas De Marchi1-1/+1
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-29fs: don't use igrab() while holding i_lockDave Chinner1-2/+2
Fix the incorrect use of igrab() inside the i_lock in NFS and Ceph‥ If we are already holding the i_lock, we have a reference to the inode so we can safely use ihold() to gain an extra reference. This avoids hangs due to lock recursion on the i_lock now that the inode_lock is gone and igrab() uses the i_lock itself. Signed-off-by: Dave Chinner <dchinner@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-05ceph: queue cap_snaps once per realmSage Weil1-4/+10
We were forming a dirty list, and then queueing cap_snaps for each realm _and_ its children, regardless of whether the children were already in the dirty list. This meant we did it twice for some realms. Which in turn meant we corrupted mdsc->snap_flush_list when the cap_snap was re-added to the list it was already on, and could trigger an infinite loop. We were also using recursion to do reach all the children, a no-no when stack is limited. Instead, (re)queue any children on the dirty list, avoiding processing anything twice and avoiding any recursion. Signed-off-by: Sage Weil <sage@newdream.net>
2010-10-21ceph: factor out libceph from Ceph file systemYehuda Sadeh1-4/+6
This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-09-17ceph: only send one flushsnap per cap_snap per mds sessionSage Weil1-1/+1
Sending multiple flushsnap messages is problematic because we ignore the response if the tid doesn't match, and the server may only respond to each one once. It's also a waste. So, skip cap_snaps that are already on the flushing list, unless the caller tells us to resend (because we are reconnecting). Signed-off-by: Sage Weil <sage@newdream.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-26 19:46:07 +0300