summaryrefslogtreecommitdiff
path: root/fs/btrfs
AgeCommit message (Collapse)AuthorFilesLines
2017-04-18Btrfs: set scrub page's io_error if failing to submit ioLiu Bo1-2/+6
Scrub repairs data by the unit called scrub_block, which may contain several pages. Scrub always tries to look up a good copy of a whole block, but if there's no such copy, it tries to do repair page by page. If we don't set page's io_error when checking this bad copy, in the last step, we may skip this page when repairing bad copy from good copy. Cc: David Sterba <dsterba@suse.cz> Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18btrfs: track exclusive filesystem operation in flagsDavid Sterba4-26/+25
There are several operations, usually started from ioctls, that cannot run concurrently. The status is tracked in mutually_exclusive_operation_running as an atomic_t. We can easily track the status as one of the per-filesystem flag bits with same synchronization guarantees. The conversion replaces: * atomic_xchg(..., 1) -> test_and_set_bit(FLAG, ...) * atomic_set(..., 0) -> clear_bit(FLAG, ...) Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18btrfs: qgroups: Retry after commit on getting EDQUOTGoldwyn Rodrigues1-1/+23
We are facing the same problem with EDQUOT which was experienced with ENOSPC. Not sure if we require a full ticketing system such as ENOSPC, but here is a quick fix, which may be too big a hammer. Quotas are reserved during the start of an operation, incrementing qg->reserved. However, it is written to disk in a commit_transaction which could take as long as commit_interval. In the meantime there could be deletions which are not accounted for because deletions are accounted for only while committed (free_refroot). So, when we get a EDQUOT flush the data to disk and try again. This fixes fstests btrfs/139. Here is a sample script which shows this issue. DEVICE=/dev/vdb MOUNTPOINT=/mnt TESTVOL=$MOUNTPOINT/tmp QUOTA=5 PROG=btrfs DD_BS="4k" DD_COUNT="256" RUN_TIMES=5000 mkfs.btrfs -f $DEVICE mount -o commit=240 $DEVICE $MOUNTPOINT $PROG subvolume create $TESTVOL $PROG quota enable $TESTVOL $PROG qgroup limit ${QUOTA}G $TESTVOL typeset -i DD_RUN_GOOD typeset -i QUOTA function _check_cmd() { if [[ ${?} > 0 ]]; then echo -n "$(date) E: Running previous command" echo ${*} echo "Without sync" $PROG qgroup show -pcreFf ${TESTVOL} echo "With sync" $PROG qgroup show -pcreFf --sync ${TESTVOL} exit 1 fi } while true; do DD_RUN_GOOD=$RUN_TIMES while (( ${DD_RUN_GOOD} != 0 )); do dd if=/dev/zero of=${TESTVOL}/quotatest${DD_RUN_GOOD} bs=${DD_BS} count=${DD_COUNT} _check_cmd "dd if=/dev/zero of=${TESTVOL}/quotatest${DD_RUN_GOOD} bs=${DD_BS} count=${DD_COUNT}" DD_RUN_GOOD=(${DD_RUN_GOOD}-1) done $PROG qgroup show -pcref $TESTVOL echo "----------- Cleanup ---------- " rm $TESTVOL/quotatest* done Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18btrfs: replace hardcoded value with SEQ_LAST macroEdmund Nadolski3-10/+12
Define the SEQ_LAST macro to replace (u64)-1 in places where said value triggers a special-case ref search behavior. Signed-off-by: Edmund Nadolski <enadolski@suse.com> Reviewed-by: Jeff Mahoney <jeffm@suse.com> Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18btrfs: provide enumeration for __merge_refs mode argumentEdmund Nadolski1-10/+13
Replace hardcoded numeric values for __merge_refs 'mode' argument with descriptive constants. Signed-off-by: Edmund Nadolski <enadolski@suse.com> Reviewed-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18btrfs: remove unused qgroup members from btrfs_trans_handleDavid Sterba6-20/+0
The members have been effectively unused since "Btrfs: rework qgroup accounting" (fcebe4562dec83b3), there's no substitute for assert_qgroups_uptodate so it's removed as well. Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18btrfs: remove local blocksize variable in reada_find_extentDavid Sterba1-4/+2
The name is misleading and the local variable serves no purpose. Reviewed-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18btrfs: remove redundant parameter from reada_start_machine_devDavid Sterba1-4/+3
We can read fs_info from dev. Reviewed-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18btrfs: remove redundant parameter from reada_find_zoneDavid Sterba1-3/+3
We can read fs_info from dev. Reviewed-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18btrfs: remove redundant parameter from btree_readahead_hookDavid Sterba3-6/+5
We can read fs_info from eb. Reviewed-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18btrfs: preallocate radix tree node for global readahead treeDavid Sterba2-1/+8
We can preallocate the node so insertion does not have to do that under the lock. The GFP flags for the global radix tree are initialized to GFP_NOFS & ~__GFP_DIRECT_RECLAIM but we can use GFP_KERNEL, because readahead is optional and not on any critical writeout path. Reviewed-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18btrfs: preallocate radix tree node for readaheadDavid Sterba2-1/+8
We can preallocate the node so insertion does not have to do that under the lock. The GFP flags for the per-device radix tree are initialized to GFP_NOFS & ~__GFP_DIRECT_RECLAIM but we can use GFP_KERNEL, same as an allocation above anyway, but also because readahead is optional and not on any critical writeout path. Reviewed-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18btrfs: No need to check !(flags & MS_RDONLY) twiceGoldwyn Rodrigues1-2/+1
Code cleanup. The code block is for !(*flags & MS_RDONLY). We don't need to check it again. Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18Btrfs: update comments in cache_save_setupLiu Bo1-1/+2
We also don't bother to flush free space cache while with free space tree. Cc: David Sterba <dsterba@suse.cz> Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18Btrfs: convert BUG_ON to WARN_ONLiu Bo1-2/+2
These two BUG_ON()s would never be true, ensured by callers' logic. Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18Btrfs: helper for ops that requires full stripeLiu Bo1-8/+10
This adds a helper to show directly whether ops require full stripe. Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18Btrfs: do not add extra mirror when dev_replace target dev is not availableLiu Bo1-3/+4
With this, we can avoid allocating memory for dev replace copies if the target dev is not available. Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18Btrfs: handle operations for device replace separatelyLiu Bo1-81/+98
Since this part is mostly independent, this moves it to a separate function. Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18Btrfs: introduce a function to get extra mirror from replaceLiu Bo1-72/+89
As the part of getting extra mirror in __btrfs_map_block is independent, this puts it into a separate function. Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18Btrfs: separate DISCARD from __btrfs_map_blockLiu Bo1-114/+175
Since DISCARD is not as important as an operation like write, we don't copy it to target device during replace, and it makes __btrfs_map_block less complex. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18Btrfs: create a helper for getting chunk mapLiu Bo3-111/+57
We have similar code here and there, this merges them into a helper. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18Btrfs: add file item tracepointsLiu Bo1-0/+15
While debugging truncate problems, I found that these tracepoints could help us quickly know what went wrong. Two sets of tracepoints are created to track regular/prealloc file item and inline file item respectively, I put inline as a separate one since what inline file items cares about are way less than the regular one. This adds four tracepoints: - btrfs_get_extent_show_fi_regular - btrfs_get_extent_show_fi_inline - btrfs_truncate_show_fi_regular - btrfs_truncate_show_fi_inline Cc: David Sterba <dsterba@suse.cz> Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> [ formatting adjustments ] Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18btrfs: convert btrfs_raid_bio.refs from atomic_t to refcount_tElena Reshetova1-10/+9
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18btrfs: convert scrub_ctx.refs from atomic_t to refcount_tElena Reshetova1-5/+5
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18btrfs: convert scrub_parity.refs from atomic_t to refcount_tElena Reshetova1-4/+4
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18btrfs: convert scrub_block.refs from atomic_t to refcount_tElena Reshetova1-5/+5
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18btrfs: convert scrub_recover.refs from atomic_t to refcount_tElena Reshetova1-4/+4
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18btrfs: convert compressed_bio.pending_bios from atomic_t to refcount_tElena Reshetova1-9/+9
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18btrfs: convert extent_state.refs from atomic_t to refcount_tElena Reshetova2-8/+9
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18btrfs: convert btrfs_root.refs from atomic_t to refcount_tElena Reshetova3-4/+4
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18btrfs: convert btrfs_delayed_item.refs from atomic_t to refcount_tElena Reshetova2-10/+10
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18btrfs: convert btrfs_delayed_node.refs from atomic_t to refcount_tElena Reshetova2-16/+16
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18btrfs: convert btrfs_delayed_ref_node.refs from atomic_t to refcount_tElena Reshetova5-12/+14
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18btrfs: convert btrfs_caching_control.count from atomic_t to refcount_tElena Reshetova2-7/+8
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18btrfs: convert btrfs_ordered_extent.refs from atomic_t to refcount_tElena Reshetova2-10/+10
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18btrfs: convert extent_map.refs from atomic_t to refcount_tElena Reshetova5-10/+11
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18btrfs: convert btrfs_transaction.use_count from atomic_t to refcount_tElena Reshetova5-14/+16
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18btrfs: convert btrfs_bio.refs from atomic_t to refcount_tElena Reshetova2-5/+5
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18Btrfs: remove ASSERT in btrfs_truncate_inode_itemsLiu Bo1-7/+0
After 76b42abbf748 ("Btrfs: fix data loss after truncate when using the no-holes feature"), For either NO_HOLES or inline extents, we've set last_size to newsize to avoid data loss after remount or inode got evicted and read again, thus, we don't need this check anymore. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18btrfs: fix a bogus warning when converting only data or metadataAdam Borowski1-3/+9
If your filesystem has, eg, data:raid0 metadata:raid1, and you run "btrfs balance -dconvert=raid1", the meta.target field will be uninitialized. That's otherwise ok, as it's unused except for this warning. Thus, let's use the existing set of raid levels for the comparison. As a side effect, non-convert balances will now nag about data>metadata. Signed-off-by: Adam Borowski <kilobyte@angband.pl> Reviewed-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-15Merge branch 'for-linus-4.11' of ↵Linus Torvalds3-13/+14
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs fixes from Chris Mason: "Dave Sterba collected a few more fixes for the last rc. These aren't marked for stable, but I'm putting them in with a batch were testing/sending by hand for this release" * 'for-linus-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: fix potential use-after-free for cloned bio Btrfs: fix segmentation fault when doing dio read Btrfs: fix invalid dereference in btrfs_retry_endio btrfs: drop the nossd flag when remounting with -o ssd
2017-04-11Btrfs: fix potential use-after-free for cloned bioLiu Bo1-1/+1
KASAN reports that there is a use-after-free case of bio in btrfs_map_bio. If we need to submit IOs to several disks at a time, the original bio would get cloned and mapped to the destination disk, but we really should use the original bio instead of a cloned bio to do the sanity check because cloned bios are likely to be freed by its endio. Reported-by: Diego <diegocg@gmail.com> Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-11Btrfs: fix segmentation fault when doing dio readLiu Bo1-2/+6
Commit 2dabb3248453 ("Btrfs: Direct I/O read: Work on sectorsized blocks") introduced this bug during iterating bio pages in dio read's endio hook, and it could end up with segment fault of the dio reading task. So the reason is 'if (nr_sectors--)', and it makes the code assume that there is one more block in the same page, so page offset is increased and the bio which is created to repair the bad block then has an incorrect bvec.bv_offset, and a later access of the page content would throw a segmentation fault. This also adds ASSERT to check page offset against page size. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-11Btrfs: fix invalid dereference in btrfs_retry_endioLiu Bo1-10/+4
When doing directIO repair, we have this oops: [ 1458.532816] general protection fault: 0000 [#1] SMP ... [ 1458.536291] Workqueue: btrfs-endio-repair btrfs_endio_repair_helper [btrfs] [ 1458.536893] task: ffff88082a42d100 task.stack: ffffc90002b3c000 [ 1458.537499] RIP: 0010:btrfs_retry_endio+0x7e/0x1a0 [btrfs] ... [ 1458.543261] Call Trace: [ 1458.543958] ? rcu_read_lock_sched_held+0xc4/0xd0 [ 1458.544374] bio_endio+0xed/0x100 [ 1458.544750] end_workqueue_fn+0x3c/0x40 [btrfs] [ 1458.545257] normal_work_helper+0x9f/0x900 [btrfs] [ 1458.545762] btrfs_endio_repair_helper+0x12/0x20 [btrfs] [ 1458.546224] process_one_work+0x34d/0xb70 [ 1458.546570] ? process_one_work+0x29e/0xb70 [ 1458.546938] worker_thread+0x1cf/0x960 [ 1458.547263] ? process_one_work+0xb70/0xb70 [ 1458.547624] kthread+0x17d/0x180 [ 1458.547909] ? kthread_create_on_node+0x70/0x70 [ 1458.548300] ret_from_fork+0x31/0x40 It turns out that btrfs_retry_endio is trying to get inode from a directIO page. This fixes the problem by using the saved inode pointer, done->inode. btrfs_retry_endio_nocsum has the same problem, and it's fixed as well. Also cleanup unused @start (which is too trivial for a separate patch). Cc: David Sterba <dsterba@suse.cz> Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-11btrfs: drop the nossd flag when remounting with -o ssdAdam Borowski1-0/+3
The opposite case was already handled right in the very next switch entry. And also when turning on nossd, drop ssd_spread. Reported-by: Hans van Kranenburg <hans.van.kranenburg@mendix.com> Signed-off-by: Adam Borowski <kilobyte@angband.pl> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-01Merge branch 'for-linus-4.11' of ↵Linus Torvalds6-29/+44
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs fixes from Chris Mason: "We have three small fixes queued up in my for-linus-4.11 branch" * 'for-linus-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: fix an integer overflow check btrfs: Change qgroup_meta_rsv to 64bit Btrfs: bring back repair during read
2017-03-29Btrfs: fix an integer overflow checkDan Carpenter1-1/+6
This isn't super serious because you need CAP_ADMIN to run this code. I added this integer overflow check last year but apparently I am rubbish at writing integer overflow checks... There are two issues. First, access_ok() works on unsigned long type and not u64 so on 32 bit systems the access_ok() could be checking a truncated size. The other issue is that we should be using a stricter limit so we don't overflow the kzalloc() setting ctx->clone_roots later in the function after the access_ok(): alloc_size = sizeof(struct clone_root) * (arg->clone_sources_count + 1); sctx->clone_roots = kzalloc(alloc_size, GFP_KERNEL | __GFP_NOWARN); Fixes: f5ecec3ce21f ("btrfs: send: silence an integer overflow warning") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> [ added comment ] Signed-off-by: David Sterba <dsterba@suse.com>
2017-03-29btrfs: Change qgroup_meta_rsv to 64bitGoldwyn Rodrigues3-7/+7
Using an int value is causing qg->reserved to become negative and exclusive -EDQUOT to be reached prematurely. This affects exclusive qgroups only. TEST CASE: DEVICE=/dev/vdb MOUNTPOINT=/mnt SUBVOL=$MOUNTPOINT/tmp umount $SUBVOL umount $MOUNTPOINT mkfs.btrfs -f $DEVICE mount /dev/vdb $MOUNTPOINT btrfs quota enable $MOUNTPOINT btrfs subvol create $SUBVOL umount $MOUNTPOINT mount /dev/vdb $MOUNTPOINT mount -o subvol=tmp $DEVICE $SUBVOL btrfs qgroup limit -e 3G $SUBVOL btrfs quota rescan /mnt -w for i in `seq 1 44000`; do dd if=/dev/zero of=/mnt/tmp/test_$i bs=10k count=1 if [[ $? > 0 ]]; then btrfs qgroup show -pcref $SUBVOL exit 1 fi done Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> [ add reproducer to changelog ] Signed-off-by: David Sterba <dsterba@suse.com>
2017-03-29Btrfs: bring back repair during readLiu Bo2-21/+31
Commit 20a7db8ab3f2 ("btrfs: add dummy callback for readpage_io_failed and drop checks") made a cleanup around readpage_io_failed_hook, and it was supposed to keep the original sematics, but it also unexpectedly disabled repair during read for dup, raid1 and raid10. This fixes the problem by letting data's inode call the generic readpage_io_failed callback by returning -EAGAIN from its readpage_io_failed_hook in order to notify end_bio_extent_readpage to do the rest. We don't call it directly because the generic one takes an offset from end_bio_extent_readpage() to calculate the index in the checksum array and inode's readpage_io_failed_hook doesn't offer that offset. Cc: David Sterba <dsterba@suse.cz> Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> [ keep the const function attribute ] Signed-off-by: David Sterba <dsterba@suse.com>
2017-03-23Merge branch 'for-linus-4.11' of ↵Linus Torvalds2-1/+16
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs fixes from Chris Mason: "Zygo tracked down a very old bug with inline compressed extents. I didn't tag this one for stable because I want to do individual tested backports. It's a little tricky and I'd rather do some extra testing on it along the way" * 'for-linus-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: btrfs: add missing memset while reading compressed inline extents Btrfs: fix regression in lock_delalloc_pages btrfs: remove btrfs_err_str function from uapi/linux/btrfs.h
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-27 18:18:17 +0300