summaryrefslogtreecommitdiff
path: root/fs/btrfs
AgeCommit message (Collapse)AuthorFilesLines
2011-10-19Btrfs: fix how we reserve space for deleting inodesJosef Bacik1-11/+38
I converted btrfs_truncate to do sane reservations for truncate, but didn't convert btrfs_evict_inode. Basically we need to save the orphan_rsv for deleting the orphan item, and do normal reservations for our truncate. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2011-10-19Btrfs: kill the durable block rsv stuffJosef Bacik5-101/+17
This is confusing code and isn't used by anything anymore, so delete it. Signed-off-by: Josef Bacik <josef@redhat.com>
2011-10-19Btrfs: kill the orphan space calculation for snapshotsJosef Bacik3-90/+0
This patch kills off the calculation for the amount of space needed for the orphan operations during a snapshot. The thing is we only do snapshots on commit, so any space that is in the block_rsv->freed[] isn't going to be in the new snapshot anyway, so there isn't any reason to require that space to be reserved for the snapshot to occur. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2011-10-19Btrfs: calculate checksum space correctlyJosef Bacik3-8/+118
We have not been reserving enough space for checksums. We were just reserving bytes for the checksum items themselves, we were not taking into account having to cow the tree and such. This patch adds a csum_bytes counter to the inode for keeping track of the number of bytes outstanding we have for checksums. Then we calculate how many leaves would be required for the checksums we are given and use that to reserve space. This adds a significant amount of bytes to our reservations, but we will handle this later. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2011-10-19Btrfs: skip looking for delalloc if we don't have ->fill_delallocJosef Bacik1-1/+5
We always look for delalloc bytes in our io_tree so we can fill in delalloc. This is fine in most cases, but if we're writing out the btree_inode this is just a superfluous tree search on the io_tree, and if we have a lot of metadata dirty this could be an expensive check. So instead check to see if our io_tree has a ->fill_delalloc op, and if not don't even bother doing the lookup. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2011-10-19Btrfs: use bytes_may_use for all ENOSPC reservationsJosef Bacik3-82/+112
We have been using bytes_reserved for metadata reservations, which is wrong since we use that to keep track of outstanding reservations from the allocator. This resulted in us doing a lot of silly things to make sure we don't allocate a bunch of metadata chunks since we never had a real view of how much space was actually in use by metadata. This passes Arne's enospc test and xfstests as well as my own enospc tests. Hopefully this will get us moving in the right direction. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2011-10-19Btrfs: fix how we mount subvol=<whatever>Josef Bacik1-64/+135
We've only been able to mount with subvol=<whatever> where whatever was a subvol within whatever root we had as the default. This allows us to mount -o subvol=path/to/subvol/you/want relative from the normal fs_tree root. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2011-10-19Btrfs: use d_obtain_alias when mounting subvol/subvolidJosef Bacik1-24/+1
Currently what we do is just wrong. We either 1) Alloc a new "root" dentry with sb->s_root as it's parent which is just wrong as we could walk into this subvol later on via another path and hilarity could ensue. Also we don't check the return value of d_splice_alias which isn't good either. or 2) Do a d_find_alias() which we could have lost our dentry from cache at this point and found nothing. So use d_obtain_alias(). In the case that we already have the inode/dentry in cache we will get the correct dentry. If not we will get a disconnected dentry tree so if we walk into it later on everything will be connected up properly. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2011-10-19Btrfs: kill reserved_bytes in inodeJosef Bacik3-8/+0
reserved_bytes is not used for anything in the inode, remove it. Signed-off-by: Josef Bacik <josef@redhat.com>
2011-10-19Btrfs: move stuff around in btrfs_inode to get better packingJosef Bacik1-3/+3
Moving things around to give us better packing in the btrfs_inode. This reduces the size of our inode by 8 bytes. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2011-10-13Merge branch 'btrfs-3.0' of git://github.com/chrismason/linuxLinus Torvalds1-1/+10
* 'btrfs-3.0' of git://github.com/chrismason/linux: Btrfs: make sure not to defrag extents past i_size Btrfs: fix recursive auto-defrag
2011-10-11Btrfs: make sure not to defrag extents past i_sizeChris Mason1-1/+3
The btrfs file defrag code will loop through the extents and force COW on them. But there is a concurrent truncate in the middle of the defrag, it might end up defragging the same range over and over again. The problem is that writepage won't go through and do anything on pages past i_size, so the cow won't happen, so the file will appear to still be fragmented. defrag will end up hitting the same extents again and again. In the worst case, the truncate can actually live lock with the defrag because the defrag keeps creating new ordered extents which the truncate code keeps waiting on. The fix here is to make defrag check for i_size inside the main loop, instead of just once before the looping starts. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-10-10Btrfs: fix recursive auto-defragLi Zefan1-0/+7
Follow those steps: # mount -o autodefrag /dev/sda7 /mnt # dd if=/dev/urandom of=/mnt/tmp bs=200K count=1 # sync # dd if=/dev/urandom of=/mnt/tmp bs=8K count=1 conv=notrunc and then it'll go into a loop: writeback -> defrag -> writeback ... It's because writeback writes [8K, 200K] and then writes [0, 8K]. I tried to make writeback know if the pages are dirtied by defrag, but the patch was a bit intrusive. Here I simply set writeback_index when we defrag a file. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-10-03Merge branch 'btrfs-3.0' of git://github.com/chrismason/linuxLinus Torvalds1-8/+16
* 'btrfs-3.0' of git://github.com/chrismason/linux: Btrfs: force a page fault if we have a shorty copy on a page boundary
2011-10-02btrfs: use readahead API for scrubArne Jansen1-62/+50
Scrub uses a simple tree-enumeration to bring the relevant portions of the extent- and csum-tree into the page cache before starting the scrub-I/O. This is now replaced by using the new readahead-API. During readahead the scrub is being accounted as paused, so it won't hold off transaction commits. This change raises the average disk bandwith utilisation on my test volume from 70% to 90%. On another volume, the time for a test run went down from 89s to 43s. Changes v5: - reada1/2 are now of type struct reada_control * Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-10-02btrfs: hooks for readaheadArne Jansen2-1/+38
This adds the hooks needed for readahead. In the readpage_end_io_hook, the extent state is checked for the EXTENT_READAHEAD flag. Only in this case the readahead hook is called, to keep the impact on non-ra as low as possible. Additionally, a hook for a failed IO is added, otherwise readahead would wait indefinitely for the extent to finish. Changes for v2: - eliminate race condition Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-10-02btrfs: initial readahead code and prototypesArne Jansen3-1/+967
This is the implementation for the generic read ahead framework. To trigger a readahead, btrfs_reada_add must be called. It will start a read ahead for the given range [start, end) on tree root. The returned handle can either be used to wait on the readahead to finish (btrfs_reada_wait), or to send it to the background (btrfs_reada_detach). The read ahead works as follows: On btrfs_reada_add, the root of the tree is inserted into a radix_tree. reada_start_machine will then search for extents to prefetch and trigger some reads. When a read finishes for a node, all contained node/leaf pointers that lie in the given range will also be enqueued. The reads will be triggered in sequential order, thus giving a big win over a naive enumeration. It will also make use of multi-device layouts. Each disk will have its on read pointer and all disks will by utilized in parallel. Also will no two disks read both sides of a mirror simultaneously, as this would waste seeking capacity. Instead both disks will read different parts of the filesystem. Any number of readaheads can be started in parallel. The read order will be determined globally, i.e. 2 parallel readaheads will normally finish faster than the 2 started one after another. Changes v2: - protect root->node by transaction instead of node_lock - fix missed branches: The readahead had a too simple check to determine if a branch from a node should be checked or not. It now also records the upper bound of each node to see if the requested RA range lies within. - use KERN_CONT to debug output, to avoid line breaks - defer reada_start_machine to worker to avoid deadlock Changes v3: - protect root->node by rcu Changes v5: - changed EIO-semantics of reada_tree_block_flagged - remove spin_lock from reada_control and make elems an atomic_t - remove unused read_total from reada_control - kill reada_key_cmp, use btrfs_comp_cpu_keys instead - use kref-style release functions where possible - return struct reada_control * instead of void * from btrfs_reada_add Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-10-02btrfs: state information for readaheadArne Jansen4-0/+31
Add state information for readahead to btrfs_fs_info and btrfs_device Changes v2: - don't wait in radix_trees - add own set of workers for readahead Reviewed-by: Josef Bacik <josef@redhat.com> Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-10-02btrfs: add READAHEAD extent buffer flagArne Jansen3-0/+35
Add a READAHEAD extent buffer flag. Add a function to trigger a read with this flag set. Changes v2: - use extent buffer flags instead of extent state flags Changes v5: - adapt to changed read_extent_buffer_pages interface - don't return eb from reada_tree_block_flagged if it has CORRUPT flag set Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-10-02btrfs: add an extra wait mode to read_extent_buffer_pagesArne Jansen3-6/+9
read_extent_buffer_pages currently has two modes, either trigger a read without waiting for anything, or wait for the I/O to finish. The former also bails when it's unable to lock the page. This patch now adds an additional parameter to allow it to block on page lock, but don't wait for completion. Changes v5: - merge the 2 wait parameters into one and define WAIT_NONE, WAIT_COMPLETE and WAIT_PAGE_LOCK Change v6: - fix bug introduced in v5 Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-09-30Merge branch 'btrfs-3.0' into for-linusChris Mason1-8/+16
2011-09-30Btrfs: force a page fault if we have a shorty copy on a page boundaryJosef Bacik1-8/+16
A user reported a problem where ceph was getting into 100% cpu usage while doing some writing. It turns out it's because we were doing a short write on a not uptodate page, which means we'd fall back at one page at a time and fault the page in. The problem is our position is on the page boundary, so our fault in logic wasn't actually reading the page, so we'd just spin forever or until the page got read in by somebody else. This will force a readpage if we end up doing a short copy. Alexandre could reproduce this easily with ceph and reports it fixes his problem. I also wrote a reproducer that no longer hangs my box with this patch. Thanks, Reported-and-tested-by: Alexandre Oliva <aoliva@redhat.com> Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-09-29btrfs: integrating raid-repair and scrub-fixup-nodatasumJan Schmidt1-25/+67
This ties nodatasum fixup in scrub together with raid repair patches. While both series are working fine alone, scrub will report uncorrectable errors if they occur in a nodatasum extent *and* the page is in the page cache. Previously, we would have triggered readpage to find good data and do the repair. However, readpage wouldn't read anything in the case where the page is up to date in the cache. So, we simply take that good data we have and call repair_io_failure directly (unless the page in the cache is dirty). Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2011-09-29btrfs: Moved repair code from inode.c to extent_io.cJan Schmidt3-159/+393
The raid-retry code in inode.c can be generalized so that it works for metadata as well. Thus, this patch moves it to extent_io.c and makes the raid-retry code a raid-repair code. Repair works that way: Whenever a read error occurs and we have more mirrors to try, note the failed mirror, and retry another. If we find a good one, check if we did note a failure earlier and if so, do not allow the read to complete until after the bad sector was written with the good data we just fetched. As we have the extent locked while reading, no one can change the data in between. Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2011-09-29btrfs: Put mirror_num in bi_bdevJan Schmidt1-0/+2
The error correction code wants to make sure that only the bad mirror is rewritten. Thus, we need to know which mirror is the bad one. I did not find a more apropriate field than bi_bdev. But I think using this is fine, because it is modified by the block layer, anyway, and should not be read after the bio returned. Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2011-09-29btrfs: Do not use bio->bi_bdev after submissionJan Schmidt1-1/+1
The block layer modifies bio->bi_bdev and bio->bi_sector while working on the bio, they do _not_ come back unmodified in the completion callback. To call add_page, we need at least some bi_bdev set, which is why the code was working, previously. With this patch, we use the latest_bdev from fsinfo instead of the leftover in the bio. This gives us the possibility to use the bi_bdev field for another purpose. Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2011-09-29btrfs: btrfs_multi_bio replaced with btrfs_bioJan Schmidt4-78/+90
btrfs_bio is a bio abstraction able to split and not complete after the last bio has returned (like the old btrfs_multi_bio). Additionally, btrfs_bio tracks the mirror_num used to read data which can be used for error correction purposes. Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2011-09-29btrfs: new ioctls to do logical->inode and inode->path resolvingJan Schmidt2-0/+162
these ioctls make use of the new functions initially added for scrub. they return all inodes belonging to a logical address (BTRFS_IOC_LOGICAL_INO) and all paths belonging to an inode (BTRFS_IOC_INO_PATHS). Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2011-09-29btrfs scrub: add fixup code for errors on nodatasum filesJan Schmidt2-6/+183
This removes a FIXME comment and introduces the first part of nodatasum fixup: It gets the corresponding inode for a logical address and triggers a regular readpage for the corrupted sector. Once we have on-the-fly error correction our error will be automatically corrected. The correction code is expected to clear the newly introduced EXTENT_DAMAGED flag, making scrub report that error as "corrected" instead of "uncorrectable" eventually. Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2011-09-29btrfs scrub: use int for mirror_num, not u64Jan Schmidt1-4/+4
the rest of the code uses int mirror_num, and so should scrub Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2011-09-29btrfs: add mirror_num to extent_read_full_pageJan Schmidt4-6/+6
Currently, extent_read_full_page always assumes we are trying to read mirror 0, which generally is the best we can do. To add flexibility, pass it as a parameter. This will be needed by scrub fixup code. Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2011-09-29btrfs scrub: bugfix: mirror_num off by oneJan Schmidt1-6/+6
Fix the mirror_num determination in scrub_stripe. The rest of the scrub code did not use mirror_num for anything important and that error went unnoticed. The nodatasum fixup patch of this set depends on a correct mirror_num. Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2011-09-29btrfs scrub: print paths of corrupted filesJan Schmidt1-6/+163
While scrubbing, we may encounter various errors. Previously, a logical address was printed to the log only. Now, all paths belonging to that address are resolved and printed separately. That should work for hardlinks as well as reflinks. Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2011-09-29btrfs scrub: added unverified_errorsJan Schmidt1-11/+26
In normal operation, scrub is reading data sequentially in large portions. In case of an i/o error, we try to find the corrupted area(s) by issuing page sized read requests. With this commit we increment the unverified_errors counter if all of the small size requests succeed. Userland patches carrying such conspicous events to the administrator should already be around. Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2011-09-29btrfs: added helper functions to iterate backrefsJan Schmidt4-1/+851
These helper functions iterate back references and call a function for each backref. There is also a function to resolve an inode to a path in the file system. Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2011-09-20Merge branch 'btrfs-3.0' into for-linusChris Mason1-1/+6
2011-09-20Btrfs: reserve sufficient space for ioctl cloneSage Weil1-1/+6
Fix a crash/BUG_ON in the clone ioctl due to insufficient reservation. We need to reserve space for: - adjusting the old extent (possibly splitting it) - adding the new extent - updating the inode Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-09-18Btrfs: only clear the need lookup flag after the dentry is setupJosef Bacik1-2/+11
We can race with readdir and the RCU path walking stuff. This is because we clear the need lookup flag before actually instantiating the inode. This will lead the RCU path walk stuff to find a dentry it thinks is valid without a d_inode attached. So instead unhash the dentry when we first start the lookup, and then clear the flag after we've instantiated the dentry so we're garunteed to either try the slow lookup, or have the d_inode set properly. Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-09-18BTRFS: Fix lseek return value for errorJeff Liu1-2/+7
The recent reworking of btrfs' lseek lead to incorrect values being returned. This adds checks for seeking beyond EOF in SEEK_HOLE and makes sure the error values come back correct. Andi Kleen also sent in similar patches. Signed-off-by: Jie Liu <jeff.liu@oracle.com> Reported-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-09-18Merge branch 'btrfs-3.0' into for-linusChris Mason2-7/+12
2011-09-18Btrfs: don't change inode flag of the dest clone fileLi Zefan1-1/+0
The dst file will have the same inode flags with dst file after file clone, and I think it's unexpected. For example, the dst file will suddenly become immutable after getting some share of data with src file, if the src is immutable. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-09-18Btrfs: don't make a file partly checksummed through file cloneLi Zefan1-0/+5
To reproduce the bug: # mount /dev/sda7 /mnt # dd if=/dev/zero of=/mnt/src bs=4K count=1 # umount /mnt # mount -o nodatasum /dev/sda7 /mnt # dd if=/dev/zero of=/mnt/dst bs=4K count=1 # clone_range -s 4K -l 4K /mnt/src /mnt/dst # echo 3 > /proc/sys/vm/drop_caches # cat /mnt/dst # dmesg ... btrfs no csum found for inode 258 start 0 btrfs csum failed ino 258 off 0 csum 2566472073 private 0 It's because part of the file is checksummed and the other part is not, and then btrfs will complain checksum is not found when we read the file. Disallow file clone if src and dst file have different checksum flag, so we ensure a file is completely checksummed or unchecksummed. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-09-18Btrfs: fix pages truncation in btrfs_ioctl_clone()Li Zefan1-4/+4
It's a bug in commit f81c9cdc567cd3160ff9e64868d9a1a7ee226480 (Btrfs: truncate pages from clone ioctl target range) We should pass the dest range to the truncate function, but not the src range. Also move the function before locking extent state. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-09-18btrfs: fix d_off in the first direntHidetoshi Seto1-2/+3
Since the d_off in the first dirent for "." (that originates from the 4th argument "offset" of filldir() for the 2nd dirent for "..") is wrongly assigned in btrfs_real_readdir(), telldir returns same offset for different locations. | # mkfs.btrfs /dev/sdb1 | # mount /dev/sdb1 fs0 | # cd fs0 | # touch file0 file1 | # ../test | telldir: 0 | readdir: d_off = 2, d_name = "." | telldir: 2 | readdir: d_off = 2, d_name = ".." | telldir: 2 | readdir: d_off = 3, d_name = "file0" | telldir: 3 | readdir: d_off = 2147483647, d_name = "file1" | telldir: 2147483647 To fix this problem, pass filp->f_pos (which is loff_t) instead. | # ../test | telldir: 0 | readdir: d_off = 1, d_name = "." | telldir: 1 | readdir: d_off = 2, d_name = ".." | telldir: 2 | readdir: d_off = 3, d_name = "file0" : At the moment the "offset" for "." is unused because there is no preceding dirent, however it is better to pass filp->f_pos to follow grammatical usage. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-09-12Merge branch 'for-linus' of git://github.com/chrismason/linuxLinus Torvalds8-22/+62
* 'for-linus' of git://github.com/chrismason/linux: Btrfs: add dummy extent if dst offset excceeds file end in Btrfs: calc file extent num_bytes correctly in file clone btrfs: xattr: fix attribute removal Btrfs: fix wrong nbytes information of the inode Btrfs: fix the file extent gap when doing direct IO Btrfs: fix unclosed transaction handle in btrfs_cont_expand Btrfs: fix misuse of trans block rsv Btrfs: reset to appropriate block rsv after orphan operations Btrfs: skip locking if searching the commit root in csum lookup btrfs: fix warning in iput for bad-inode Btrfs: fix an oops when deleting snapshots
2011-09-11Btrfs: add dummy extent if dst offset excceeds file end inLi Zefan1-0/+6
You can see there's no file extent with range [0, 4096]. Check this by btrfsck: # btrfsck /dev/sda7 root 5 inode 258 errors 100 ... Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-09-11Btrfs: calc file extent num_bytes correctly in file cloneLi Zefan1-3/+10
num_bytes should be 4096 not 12288. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-09-11btrfs: xattr: fix attribute removalDavid Sterba1-0/+9
An attribute is not removed by 'setfattr -x attr file' and remains visible in attr list. This makes xfstests/062 pass again. Signed-off-by: David Sterba <dsterba@suse.cz> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-09-11Btrfs: fix wrong nbytes information of the inodeMiao Xie1-2/+2
If we write some data into the data hole of the file(no preallocation for this hole), Btrfs will allocate some disk space, and update nbytes of the inode, but the other element--disk_i_size needn't be updated. At this condition, we must update inode metadata though disk_i_size is not changed(btrfs_ordered_update_i_size() return 1). # mkfs.btrfs /dev/sdb1 # mount /dev/sdb1 /mnt # touch /mnt/a # truncate -s 856002 /mnt/a # dd if=/dev/zero of=/mnt/a bs=4K count=1 conv=nocreat,notrunc # umount /mnt # btrfsck /dev/sdb1 root 5 inode 257 errors 400 found 32768 bytes used err is 1 Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-09-11Btrfs: fix the file extent gap when doing direct IOMiao Xie1-6/+10
When we write some data to the place that is beyond the end of the file in direct I/O mode, a data hole will be created. And Btrfs should insert a file extent item that point to this hole into the fs tree. But unfortunately Btrfs forgets doing it. The following is a simple way to reproduce it: # mkfs.btrfs /dev/sdc2 # mount /dev/sdc2 /test4 # touch /test4/a # dd if=/dev/zero of=/test4/a seek=8 count=1 bs=4K oflag=direct conv=nocreat,notrunc # umount /test4 # btrfsck /dev/sdc2 root 5 inode 257 errors 100 Reported-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com> Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Tested-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-30 05:13:45 +0300