summaryrefslogtreecommitdiff
path: root/fs/btrfs/volumes.c
AgeCommit message (Collapse)AuthorFilesLines
2020-09-23btrfs: fix lockdep splat in add_missing_devJosef Bacik1-0/+10
commit fccc0007b8dc952c6bc0805cdf842eb8ea06a639 upstream. Nikolay reported a lockdep splat in generic/476 that I could reproduce with btrfs/187. ====================================================== WARNING: possible circular locking dependency detected 5.9.0-rc2+ #1 Tainted: G W ------------------------------------------------------ kswapd0/100 is trying to acquire lock: ffff9e8ef38b6268 (&delayed_node->mutex){+.+.}-{3:3}, at: __btrfs_release_delayed_node.part.0+0x3f/0x330 but task is already holding lock: ffffffffa9d74700 (fs_reclaim){+.+.}-{0:0}, at: __fs_reclaim_acquire+0x5/0x30 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (fs_reclaim){+.+.}-{0:0}: fs_reclaim_acquire+0x65/0x80 slab_pre_alloc_hook.constprop.0+0x20/0x200 kmem_cache_alloc_trace+0x3a/0x1a0 btrfs_alloc_device+0x43/0x210 add_missing_dev+0x20/0x90 read_one_chunk+0x301/0x430 btrfs_read_sys_array+0x17b/0x1b0 open_ctree+0xa62/0x1896 btrfs_mount_root.cold+0x12/0xea legacy_get_tree+0x30/0x50 vfs_get_tree+0x28/0xc0 vfs_kern_mount.part.0+0x71/0xb0 btrfs_mount+0x10d/0x379 legacy_get_tree+0x30/0x50 vfs_get_tree+0x28/0xc0 path_mount+0x434/0xc00 __x64_sys_mount+0xe3/0x120 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #1 (&fs_info->chunk_mutex){+.+.}-{3:3}: __mutex_lock+0x7e/0x7e0 btrfs_chunk_alloc+0x125/0x3a0 find_free_extent+0xdf6/0x1210 btrfs_reserve_extent+0xb3/0x1b0 btrfs_alloc_tree_block+0xb0/0x310 alloc_tree_block_no_bg_flush+0x4a/0x60 __btrfs_cow_block+0x11a/0x530 btrfs_cow_block+0x104/0x220 btrfs_search_slot+0x52e/0x9d0 btrfs_lookup_inode+0x2a/0x8f __btrfs_update_delayed_inode+0x80/0x240 btrfs_commit_inode_delayed_inode+0x119/0x120 btrfs_evict_inode+0x357/0x500 evict+0xcf/0x1f0 vfs_rmdir.part.0+0x149/0x160 do_rmdir+0x136/0x1a0 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #0 (&delayed_node->mutex){+.+.}-{3:3}: __lock_acquire+0x1184/0x1fa0 lock_acquire+0xa4/0x3d0 __mutex_lock+0x7e/0x7e0 __btrfs_release_delayed_node.part.0+0x3f/0x330 btrfs_evict_inode+0x24c/0x500 evict+0xcf/0x1f0 dispose_list+0x48/0x70 prune_icache_sb+0x44/0x50 super_cache_scan+0x161/0x1e0 do_shrink_slab+0x178/0x3c0 shrink_slab+0x17c/0x290 shrink_node+0x2b2/0x6d0 balance_pgdat+0x30a/0x670 kswapd+0x213/0x4c0 kthread+0x138/0x160 ret_from_fork+0x1f/0x30 other info that might help us debug this: Chain exists of: &delayed_node->mutex --> &fs_info->chunk_mutex --> fs_reclaim Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(fs_reclaim); lock(&fs_info->chunk_mutex); lock(fs_reclaim); lock(&delayed_node->mutex); *** DEADLOCK *** 3 locks held by kswapd0/100: #0: ffffffffa9d74700 (fs_reclaim){+.+.}-{0:0}, at: __fs_reclaim_acquire+0x5/0x30 #1: ffffffffa9d65c50 (shrinker_rwsem){++++}-{3:3}, at: shrink_slab+0x115/0x290 #2: ffff9e8e9da260e0 (&type->s_umount_key#48){++++}-{3:3}, at: super_cache_scan+0x38/0x1e0 stack backtrace: CPU: 1 PID: 100 Comm: kswapd0 Tainted: G W 5.9.0-rc2+ #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014 Call Trace: dump_stack+0x92/0xc8 check_noncircular+0x12d/0x150 __lock_acquire+0x1184/0x1fa0 lock_acquire+0xa4/0x3d0 ? __btrfs_release_delayed_node.part.0+0x3f/0x330 __mutex_lock+0x7e/0x7e0 ? __btrfs_release_delayed_node.part.0+0x3f/0x330 ? __btrfs_release_delayed_node.part.0+0x3f/0x330 ? lock_acquire+0xa4/0x3d0 ? btrfs_evict_inode+0x11e/0x500 ? find_held_lock+0x2b/0x80 __btrfs_release_delayed_node.part.0+0x3f/0x330 btrfs_evict_inode+0x24c/0x500 evict+0xcf/0x1f0 dispose_list+0x48/0x70 prune_icache_sb+0x44/0x50 super_cache_scan+0x161/0x1e0 do_shrink_slab+0x178/0x3c0 shrink_slab+0x17c/0x290 shrink_node+0x2b2/0x6d0 balance_pgdat+0x30a/0x670 kswapd+0x213/0x4c0 ? _raw_spin_unlock_irqrestore+0x46/0x60 ? add_wait_queue_exclusive+0x70/0x70 ? balance_pgdat+0x670/0x670 kthread+0x138/0x160 ? kthread_create_worker_on_cpu+0x40/0x40 ret_from_fork+0x1f/0x30 This is because we are holding the chunk_mutex when we call btrfs_alloc_device, which does a GFP_KERNEL allocation. We don't want to switch that to a GFP_NOFS lock because this is the only place where it matters. So instead use memalloc_nofs_save() around the allocation in order to avoid the lockdep splat. Reported-by: Nikolay Borisov <nborisov@suse.com> CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-09btrfs: drop path before adding new uuid tree entryJosef Bacik1-1/+2
commit 9771a5cf937129307d9f58922d60484d58ababe7 upstream. With the conversion of the tree locks to rwsem I got the following lockdep splat: ====================================================== WARNING: possible circular locking dependency detected 5.8.0-rc7-00167-g0d7ba0c5b375-dirty #925 Not tainted ------------------------------------------------------ btrfs-uuid/7955 is trying to acquire lock: ffff88bfbafec0f8 (btrfs-root-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x39/0x180 but task is already holding lock: ffff88bfbafef2a8 (btrfs-uuid-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x39/0x180 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (btrfs-uuid-00){++++}-{3:3}: down_read_nested+0x3e/0x140 __btrfs_tree_read_lock+0x39/0x180 __btrfs_read_lock_root_node+0x3a/0x50 btrfs_search_slot+0x4bd/0x990 btrfs_uuid_tree_add+0x89/0x2d0 btrfs_uuid_scan_kthread+0x330/0x390 kthread+0x133/0x150 ret_from_fork+0x1f/0x30 -> #0 (btrfs-root-00){++++}-{3:3}: __lock_acquire+0x1272/0x2310 lock_acquire+0x9e/0x360 down_read_nested+0x3e/0x140 __btrfs_tree_read_lock+0x39/0x180 __btrfs_read_lock_root_node+0x3a/0x50 btrfs_search_slot+0x4bd/0x990 btrfs_find_root+0x45/0x1b0 btrfs_read_tree_root+0x61/0x100 btrfs_get_root_ref.part.50+0x143/0x630 btrfs_uuid_tree_iterate+0x207/0x314 btrfs_uuid_rescan_kthread+0x12/0x50 kthread+0x133/0x150 ret_from_fork+0x1f/0x30 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(btrfs-uuid-00); lock(btrfs-root-00); lock(btrfs-uuid-00); lock(btrfs-root-00); *** DEADLOCK *** 1 lock held by btrfs-uuid/7955: #0: ffff88bfbafef2a8 (btrfs-uuid-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x39/0x180 stack backtrace: CPU: 73 PID: 7955 Comm: btrfs-uuid Kdump: loaded Not tainted 5.8.0-rc7-00167-g0d7ba0c5b375-dirty #925 Hardware name: Quanta Tioga Pass Single Side 01-0030993006/Tioga Pass Single Side, BIOS F08_3A18 12/20/2018 Call Trace: dump_stack+0x78/0xa0 check_noncircular+0x165/0x180 __lock_acquire+0x1272/0x2310 lock_acquire+0x9e/0x360 ? __btrfs_tree_read_lock+0x39/0x180 ? btrfs_root_node+0x1c/0x1d0 down_read_nested+0x3e/0x140 ? __btrfs_tree_read_lock+0x39/0x180 __btrfs_tree_read_lock+0x39/0x180 __btrfs_read_lock_root_node+0x3a/0x50 btrfs_search_slot+0x4bd/0x990 btrfs_find_root+0x45/0x1b0 btrfs_read_tree_root+0x61/0x100 btrfs_get_root_ref.part.50+0x143/0x630 btrfs_uuid_tree_iterate+0x207/0x314 ? btree_readpage+0x20/0x20 btrfs_uuid_rescan_kthread+0x12/0x50 kthread+0x133/0x150 ? kthread_create_on_node+0x60/0x60 ret_from_fork+0x1f/0x30 This problem exists because we have two different rescan threads, btrfs_uuid_scan_kthread which creates the uuid tree, and btrfs_uuid_tree_iterate that goes through and updates or deletes any out of date roots. The problem is they both do things in different order. btrfs_uuid_scan_kthread() reads the tree_root, and then inserts entries into the uuid_root. btrfs_uuid_tree_iterate() scans the uuid_root, but then does a btrfs_get_fs_root() which can read from the tree_root. It's actually easy enough to not be holding the path in btrfs_uuid_scan_kthread() when we add a uuid entry, as we already drop it further down and re-start the search when we loop. So simply move the path release before we add our entry to the uuid tree. This also fixes a problem where we're holding a path open after we do btrfs_end_transaction(), which has it's own problems. CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-29btrfs: fix mount failure caused by race with umountBoris Burkov1-0/+8
commit 48cfa61b58a1fee0bc49eef04f8ccf31493b7cdd upstream. It is possible to cause a btrfs mount to fail by racing it with a slow umount. The crux of the sequence is generic_shutdown_super not yet calling sop->put_super before btrfs_mount_root calls btrfs_open_devices. If that occurs, btrfs_open_devices will decide the opened counter is non-zero, increment it, and skip resetting fs_devices->total_rw_bytes to 0. From here, mount will call sget which will result in grab_super trying to take the super block umount semaphore. That semaphore will be held by the slow umount, so mount will block. Before up-ing the semaphore, umount will delete the super block, resulting in mount's sget reliably allocating a new one, which causes the mount path to dutifully fill it out, and increment total_rw_bytes a second time, which causes the mount to fail, as we see double the expected bytes. Here is the sequence laid out in greater detail: CPU0 CPU1 down_write sb->s_umount btrfs_kill_super kill_anon_super(sb) generic_shutdown_super(sb); shrink_dcache_for_umount(sb); sync_filesystem(sb); evict_inodes(sb); // SLOW btrfs_mount_root btrfs_scan_one_device fs_devices = device->fs_devices fs_info->fs_devices = fs_devices // fs_devices-opened makes this a no-op btrfs_open_devices(fs_devices, mode, fs_type) s = sget(fs_type, test, set, flags, fs_info); find sb in s_instances grab_super(sb); down_write(&s->s_umount); // blocks sop->put_super(sb) // sb->fs_devices->opened == 2; no-op spin_lock(&sb_lock); hlist_del_init(&sb->s_instances); spin_unlock(&sb_lock); up_write(&sb->s_umount); return 0; retry lookup don't find sb in s_instances (deleted by CPU0) s = alloc_super return s; btrfs_fill_super(s, fs_devices, data) open_ctree // fs_devices total_rw_bytes improperly set! btrfs_read_chunk_tree read_one_dev // increment total_rw_bytes again!! super_total_bytes < fs_devices->total_rw_bytes // ERROR!!! To fix this, we clear total_rw_bytes from within btrfs_read_chunk_tree before the calls to read_one_dev, while holding the sb umount semaphore and the uuid mutex. To reproduce, it is sufficient to dirty a decent number of inodes, then quickly umount and mount. for i in $(seq 0 500) do dd if=/dev/zero of="/mnt/foo/$i" bs=1M count=1 done umount /mnt/foo& mount /mnt/foo does the trick for me. CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Boris Burkov <boris@bur.io> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-28btrfs: device stats, log when stats are zeroedAnand Jain1-0/+2
[ Upstream commit a69976bc69308aa475d0ba3b8b3efd1d013c0460 ] We had a report indicating that some read errors aren't reported by the device stats in the userland. It is important to have the errors reported in the device stat as user land scripts might depend on it to take the reasonable corrective actions. But to debug these issue we need to be really sure that request to reset the device stat did not come from the userland itself. So log an info message when device error reset happens. For example: BTRFS info (device sdc): device stats zeroed by btrfs(9223) Reported-by: philip@philip-seeger.de Link: https://www.spinics.net/lists/linux-btrfs/msg96528.html Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-08-06btrfs: fix minimum number of chunk errors for DUPDavid Sterba1-2/+1
[ Upstream commit 0ee5f8ae082e1f675a2fb6db601c31ac9958a134 ] The list of profiles in btrfs_chunk_max_errors lists DUP as a profile DUP able to tolerate 1 device missing. Though this profile is special with 2 copies, it still needs the device, unlike the others. Looking at the history of changes, thre's no clear reason why DUP is there, functions were refactored and blocks of code merged to one helper. d20983b40e828 Btrfs: fix writing data into the seed filesystem - factor code to a helper de11cc12df173 Btrfs: don't pre-allocate btrfs bio - unrelated change, DUP still in the list with max errors 1 a236aed14ccb0 Btrfs: Deal with failed writes in mirrored configurations - introduced the max errors, leaves DUP and RAID1 in the same group Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-10btrfs: Ensure replaced device doesn't have pending chunk allocationNikolay Borisov1-0/+2
commit debd1c065d2037919a7da67baf55cc683fee09f0 upstream. Recent FITRIM work, namely bbbf7243d62d ("btrfs: combine device update operations during transaction commit") combined the way certain operations are recoded in a transaction. As a result an ASSERT was added in dev_replace_finish to ensure the new code works correctly. Unfortunately I got reports that it's possible to trigger the assert, meaning that during a device replace it's possible to have an unfinished chunk allocation on the source device. This is supposed to be prevented by the fact that a transaction is committed before finishing the replace oepration and alter acquiring the chunk mutex. This is not sufficient since by the time the transaction is committed and the chunk mutex acquired it's possible to allocate a chunk depending on the workload being executed on the replaced device. This bug has been present ever since device replace was introduced but there was never code which checks for it. The correct way to fix is to ensure that there is no pending device modification operation when the chunk mutex is acquire and if there is repeat transaction commit. Unfortunately it's not possible to just exclude the source device from btrfs_fs_devices::dev_alloc_list since this causes ENOSPC to be hit in transaction commit. Fixing that in another way would need to add special cases to handle the last writes and forbid new ones. The looped transaction fix is more obvious, and can be easily backported. The runtime of dev-replace is long so there's no noticeable delay caused by that. Reported-by: David Sterba <dsterba@suse.com> Fixes: 391cd9df81ac ("Btrfs: fix unprotected alloc list insertion during the finishing procedure of replace") CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-23btrfs: ensure that a DUP or RAID1 block group has exactly two stripesJohannes Thumshirn1-2/+2
commit 349ae63f40638a28c6fce52e8447c2d14b84cc0c upstream. We recently had a customer issue with a corrupted filesystem. When trying to mount this image btrfs panicked with a division by zero in calc_stripe_length(). The corrupt chunk had a 'num_stripes' value of 1. calc_stripe_length() takes this value and divides it by the number of copies the RAID profile is expected to have to calculate the amount of data stripes. As a DUP profile is expected to have 2 copies this division resulted in 1/2 = 0. Later then the 'data_stripes' variable is used as a divisor in the stripe length calculation which results in a division by 0 and thus a kernel panic. When encountering a filesystem with a DUP block group and a 'num_stripes' value unequal to 2, refuse mounting as the image is corrupted and will lead to unexpected behaviour. Code inspection showed a RAID1 block group has the same issues. Fixes: e06cd3dd7cea ("Btrfs: add validadtion checks for chunk loading") CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Qu Wenruo <wqu@suse.com> Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-05btrfs: tree-checker: Verify block_group_itemQu Wenruo1-1/+1
commit fce466eab7ac6baa9d2dcd88abcf945be3d4a089 upstream. A crafted image with invalid block group items could make free space cache code to cause panic. We could detect such invalid block group item by checking: 1) Item size Known fixed value. 2) Block group size (key.offset) We have an upper limit on block group item (10G) 3) Chunk objectid Known fixed value. 4) Type Only 4 valid type values, DATA, METADATA, SYSTEM and DATA|METADATA. No more than 1 bit set for profile type. 5) Used space No more than the block group size. This should allow btrfs to detect and refuse to mount the crafted image. Link: https://bugzilla.kernel.org/show_bug.cgi?id=199849 Reported-by: Xu Wen <wen.xu@gatech.edu> Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: Gu Jinxiang <gujx@cn.fujitsu.com> Reviewed-by: Nikolay Borisov <nborisov@suse.com> Tested-by: Gu Jinxiang <gujx@cn.fujitsu.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> [bwh: Backported to 4.14: - In check_leaf_item(), pass root->fs_info to check_block_group_item() - Adjust context] Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-12-05btrfs: validate type when reading a chunkGu Jinxiang1-0/+28
commit 315409b0098fb2651d86553f0436b70502b29bb2 upstream. Reported in https://bugzilla.kernel.org/show_bug.cgi?id=199839, with an image that has an invalid chunk type but does not return an error. Add chunk type check in btrfs_check_chunk_valid, to detect the wrong type combinations. Link: https://bugzilla.kernel.org/show_bug.cgi?id=199839 Reported-by: Xu Wen <wen.xu@gatech.edu> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Gu Jinxiang <gujx@cn.fujitsu.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-10-10btrfs: btrfs_shrink_device should call commit transaction at the endAnand Jain1-1/+6
[ Upstream commit 801660b040d132f67fac6a95910ad307c5929b49 ] Test case btrfs/164 reports use-after-free: [ 6712.084324] general protection fault: 0000 [#1] PREEMPT SMP .. [ 6712.195423] btrfs_update_commit_device_size+0x75/0xf0 [btrfs] [ 6712.201424] btrfs_commit_transaction+0x57d/0xa90 [btrfs] [ 6712.206999] btrfs_rm_device+0x627/0x850 [btrfs] [ 6712.211800] btrfs_ioctl+0x2b03/0x3120 [btrfs] Reason for this is that btrfs_shrink_device adds the resized device to the fs_devices::resized_devices after it has called the last commit transaction. So the list fs_devices::resized_devices is not empty when btrfs_shrink_device returns. Now the parent function btrfs_rm_device calls: btrfs_close_bdev(device); call_rcu(&device->rcu, free_device_rcu); and then does the transactio ncommit. It goes through the fs_devices::resized_devices in btrfs_update_commit_device_size and leads to use-after-free. Fix this by making sure btrfs_shrink_device calls the last needed btrfs_commit_transaction before the return. This is consistent with what the grow counterpart does and this makes sure the on-disk state is persistent when the function returns. Reported-by: Lu Fengqi <lufq.fnst@cn.fujitsu.com> Tested-by: Lu Fengqi <lufq.fnst@cn.fujitsu.com> Signed-off-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> [ update changelog ] Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-15btrfs: Exit gracefully when chunk map cannot be inserted to the treeQu Wenruo1-2/+6
[ Upstream commit 64f64f43c89aca1782aa672e0586f6903c5d8979 ] It's entirely possible that a crafted btrfs image contains overlapping chunks. Although we can't detect such problem by tree-checker, it's not a catastrophic problem, current extent map can already detect such problem and return -EEXIST. We just only need to exit gracefully and fail the mount. Reported-by: Xu Wen <wen.xu@gatech.edu> Link: https://bugzilla.kernel.org/show_bug.cgi?id=200409 Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-20Btrfs: make raid6 rebuild retry moreLiu Bo1-1/+8
[ Upstream commit 8810f7517a3bc4ca2d41d022446d3f5fd6b77c09 ] There is a scenario that can end up with rebuild process failing to return good content, i.e. suppose that all disks can be read without problems and if the content that was read out doesn't match its checksum, currently for raid6 btrfs at most retries twice, - the 1st retry is to rebuild with all other stripes, it'll eventually be a raid5 xor rebuild, - if the 1st fails, the 2nd retry will deliberately fail parity p so that it will do raid6 style rebuild, however, the chances are that another non-parity stripe content also has something corrupted, so that the above retries are not able to return correct content, and users will think of this as data loss. More seriouly, if the loss happens on some important internal btree roots, it could refuse to mount. This extends btrfs to do more retries and each retry fails only one stripe. Since raid6 can tolerate 2 disk failures, if there is one more failure besides the failure on which we're recovering, this can always work. The worst case is to retry as many times as the number of raid6 disks, but given the fact that such a scenario is really rare in practice, it's still acceptable. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-20Revert "Btrfs: fix scrub to repair raid6 corruption"Sasha Levin1-8/+1
This reverts commit d91bb7c6988bd6450284c762b33f2e1ea3fe7c97. This commit used an incorrect log message. Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-22btrfs: fix crash when trying to resume balance without the resume flagAnand Jain1-0/+9
commit 02ee654d3a04563c67bfe658a05384548b9bb105 upstream. We set the BTRFS_BALANCE_RESUME flag in the btrfs_recover_balance() only, which isn't called during the remount. So when resuming from the paused balance we hit the bug: kernel: kernel BUG at fs/btrfs/volumes.c:3890! :: kernel: balance_kthread+0x51/0x60 [btrfs] kernel: kthread+0x111/0x130 :: kernel: RIP: btrfs_balance+0x12e1/0x1570 [btrfs] RSP: ffffba7d0090bde8 Reproducer: On a mounted filesystem: btrfs balance start --full-balance /btrfs btrfs balance pause /btrfs mount -o remount,ro /dev/sdb /btrfs mount -o remount,rw /dev/sdb /btrfs To fix this set the BTRFS_BALANCE_RESUME flag in btrfs_resume_balance_async(). CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-26Btrfs: fix scrub to repair raid6 corruptionLiu Bo1-1/+8
[ Upstream commit 762221f095e3932669093466aaf4b85ed9ad2ac1 ] The raid6 corruption is that, suppose that all disks can be read without problems and if the content that was read out doesn't match its checksum, currently for raid6 btrfs at most retries twice, - the 1st retry is to rebuild with all other stripes, it'll eventually be a raid5 xor rebuild, - if the 1st fails, the 2nd retry will deliberately fail parity p so that it will do raid6 style rebuild, however, the chances are that another non-parity stripe content also has something corrupted, so that the above retries are not able to return correct content. We've fixed normal reads to rebuild raid6 correctly with more retries in Patch "Btrfs: make raid6 rebuild retry more"[1], this is to fix scrub to do the exactly same rebuild process. [1]: https://patchwork.kernel.org/patch/10091755/ Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-21btrfs: Fix memory barriers usage with device stats countersNikolay Borisov1-2/+16
commit 9deae9689231964972a94bb56a79b669f9d47ac1 upstream. Commit addc3fa74e5b ("Btrfs: Fix the problem that the dirty flag of dev stats is cleared") reworked the way device stats changes are tracked. A new atomic dev_stats_ccnt counter was introduced which is incremented every time any of the device stats counters are changed. This serves as a flag whether there are any pending stats changes. However, this patch only partially implemented the correct memory barriers necessary: - It only ordered the stores to the counters but not the reads e.g. btrfs_run_dev_stats - It completely omitted any comments documenting the intended design and how the memory barriers pair with each-other This patch provides the necessary comments as well as adds a missing smp_rmb in btrfs_run_dev_stats. Furthermore since dev_stats_cnt is only a snapshot at best there was no point in reading the counter twice - once in btrfs_dev_stats_dirty and then again when assigning stats_cnt. Just collapse both reads into 1. Fixes: addc3fa74e5b ("Btrfs: Fix the problem that the dirty flag of dev stats is cleared") Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-21btrfs: Fix use-after-free when cleaning up fs_devs with a single stale deviceNikolay Borisov1-0/+1
commit fd649f10c3d21ee9d7542c609f29978bdf73ab94 upstream. Commit 4fde46f0cc71 ("Btrfs: free the stale device") introduced btrfs_free_stale_device which iterates the device lists for all registered btrfs filesystems and deletes those devices which aren't mounted. In a btrfs_devices structure has only 1 device attached to it and it is unused then btrfs_free_stale_devices will proceed to also free the btrfs_fs_devices struct itself. Currently this leads to a use after free since list_for_each_entry will try to perform a check on the already freed memory to see if it has to terminate the loop. The fix is to use 'break' when we know we are freeing the current fs_devs. Fixes: 4fde46f0cc71 ("Btrfs: free the stale device") Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-21btrfs: alloc_chunk: fix DUP stripe size handlingHans van Kranenburg1-5/+6
commit 92e222df7b8f05c565009c7383321b593eca488b upstream. In case of using DUP, we search for enough unallocated disk space on a device to hold two stripes. The devices_info[ndevs-1].max_avail that holds the amount of unallocated space found is directly assigned to stripe_size, while it's actually twice the stripe size. Later on in the code, an unconditional division of stripe_size by dev_stripes corrects the value, but in the meantime there's a check to see if the stripe_size does not exceed max_chunk_size. Since during this check stripe_size is twice the amount as intended, the check will reduce the stripe_size to max_chunk_size if the actual correct to be used stripe_size is more than half the amount of max_chunk_size. The unconditional division later tries to correct stripe_size, but will actually make sure we can't allocate more than half the max_chunk_size. Fix this by moving the division by dev_stripes before the max chunk size check, so it always contains the right value, instead of putting a duct tape division in further on to get it fixed again. Since in all other cases than DUP, dev_stripes is 1, this change only affects DUP. Other attempts in the past were made to fix this: * 37db63a400 "Btrfs: fix max chunk size check in chunk allocator" tried to fix the same problem, but still resulted in part of the code acting on a wrongly doubled stripe_size value. * 86db25785a "Btrfs: fix max chunk size on raid5/6" unintentionally broke this fix again. The real problem was already introduced with the rest of the code in 73c5de0051. The user visible result however will be that the max chunk size for DUP will suddenly double, while it's actually acting according to the limits in the code again like it was 5 years ago. Reported-by: Naohiro Aota <naohiro.aota@wdc.com> Link: https://www.spinics.net/lists/linux-btrfs/msg69752.html Fixes: 73c5de0051 ("btrfs: quasi-round-robin for chunk allocation") Fixes: 86db25785a ("Btrfs: fix max chunk size on raid5/6") Signed-off-by: Hans van Kranenburg <hans.van.kranenburg@mendix.com> Reviewed-by: David Sterba <dsterba@suse.com> [ update comment ] Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-03btrfs: Fix flush bio leakNikolay Borisov1-1/+0
[ Upstream commit beed9263f4000c48a5c48912f26576f6fa091181 ] Commit e0ae99941423 ("btrfs: preallocate device flush bio") reworked the way the flush bio is allocated and used. Concretely it allocates the bio in __alloc_device and then re-uses it multiple times with a very simple endio routine that just calls complete() without consuming a reference. Allocated bios by default come with a ref count of 1, which is then consumed by the endio routine (or not, in which case they should be bio_put by the caller). The way the impleementation works now is that the flush bio has a refcount of 2 and we only ever bio_put it once, leaving it to hang indefinitely. Fix this by removing the extra bio_get in __alloc_device. Fixes: e0ae99941423 ("btrfs: preallocate device flush bio") Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-03btrfs: Fix transaction abort during failure in btrfs_rm_dev_itemNikolay Borisov1-8/+12
[ Upstream commit 5e9f2ad5b2904a7e81df6d9a3dbef29478952eac ] btrfs_rm_dev_item calls several function under an active transaction, however it fails to abort it if an error happens. Fix this by adding explicit btrfs_abort_transaction/btrfs_end_transaction calls. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-20btrfs: undo writable superblocke when sprouting failsAnand Jain1-0/+2
[ Upstream commit 0af2c4bf5a012a40a2f9230458087d7f068339d0 ] When new device is being added to seed FS, seed FS is marked writable, but when we fail to bring in the new device, we missed to undo the writable part. This patch fixes it. Signed-off-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-20btrfs: fix false EIO for missing deviceAnand Jain1-1/+4
[ Upstream commit 102ed2c5ff932439bbbe74c7bd63e6d5baa9f732 ] When one of the device is missing, bbio_error() takes care of setting the error status. And if its only IO that is pending in that stripe, it fails to check the status of the other IO at %bbio_error before setting the error %bi_status for the %orig_bio. Fix this by checking if %bbio->error has exceeded the %bbio->max_errors. Reproducer as below fdatasync error is seen intermittently. mount -o degraded /dev/sdc /btrfs dd status=none if=/dev/zero of=$(mktemp /btrfs/XXX) bs=4096 count=1 conv=fdatasync dd: fdatasync failed for ‘/btrfs/LSe’: Input/output error The reason for the intermittences of the problem is because the following conditions have to be met, which depends on timing: In btrfs_map_bio() - the RAID1 the missing device has to be at %dev_nr = 1 In bbio_error() . before bbio_error() is called the bio of the not-missing device at %dev_nr = 0 must be completed so that the below condition is true if (atomic_dec_and_test(&bbio->stripes_pending)) { Signed-off-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-29Merge branch 'for-4.14-rc3' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: "We've collected a bunch of isolated fixes, for crashes, user-visible behaviour or missing bits from other subsystem cleanups from the past. The overall number is not small but I was not able to make it significantly smaller. Most of the patches are supposed to go to stable" * 'for-4.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: log csums for all modified extents Btrfs: fix unexpected result when dio reading corrupted blocks btrfs: Report error on removing qgroup if del_qgroup_item fails Btrfs: skip checksum when reading compressed data if some IO have failed Btrfs: fix kernel oops while reading compressed data Btrfs: use btrfs_op instead of bio_op in __btrfs_map_block Btrfs: do not backup tree roots when fsync btrfs: remove BTRFS_FS_QUOTA_DISABLING flag btrfs: propagate error to btrfs_cmp_data_prepare caller btrfs: prevent to set invalid default subvolid Btrfs: send: fix error number for unknown inode types btrfs: fix NULL pointer dereference from free_reloc_roots() btrfs: finish ordered extent cleaning if no progress is found btrfs: clear ordered flag on cleaning up ordered extents Btrfs: fix incorrect {node,sector}size endianness from BTRFS_IOC_FS_INFO Btrfs: do not reset bio->bi_ops while writing bio Btrfs: use the new helper wbc_to_write_flags
2017-09-26Btrfs: use btrfs_op instead of bio_op in __btrfs_map_blockLiu Bo1-1/+1
This seems to be a leftover of commit cf8cddd38bab ("btrfs: don't abuse REQ_OP_* flags for btrfs_map_block"). It should use btrfs_op() helper to provide one of 'enum btrfs_map_op' types. Fixes: cf8cddd38bab ("btrfs: don't abuse REQ_OP_* flags for btrfs_map_block") Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: Satoru Takeuchi <satoru.takeuchi@gmail.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-09-15Merge branch 'work.mount' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull mount flag updates from Al Viro: "Another chunk of fmount preparations from dhowells; only trivial conflicts for that part. It separates MS_... bits (very grotty mount(2) ABI) from the struct super_block ->s_flags (kernel-internal, only a small subset of MS_... stuff). This does *not* convert the filesystems to new constants; only the infrastructure is done here. The next step in that series is where the conflicts would be; that's the conversion of filesystems. It's purely mechanical and it's better done after the merge, so if you could run something like list=$(for i in MS_RDONLY MS_NOSUID MS_NODEV MS_NOEXEC MS_SYNCHRONOUS MS_MANDLOCK MS_DIRSYNC MS_NOATIME MS_NODIRATIME MS_SILENT MS_POSIXACL MS_KERNMOUNT MS_I_VERSION MS_LAZYTIME; do git grep -l $i fs drivers/staging/lustre drivers/mtd ipc mm include/linux; done|sort|uniq|grep -v '^fs/namespace.c$') sed -i -e 's/\<MS_RDONLY\>/SB_RDONLY/g' \ -e 's/\<MS_NOSUID\>/SB_NOSUID/g' \ -e 's/\<MS_NODEV\>/SB_NODEV/g' \ -e 's/\<MS_NOEXEC\>/SB_NOEXEC/g' \ -e 's/\<MS_SYNCHRONOUS\>/SB_SYNCHRONOUS/g' \ -e 's/\<MS_MANDLOCK\>/SB_MANDLOCK/g' \ -e 's/\<MS_DIRSYNC\>/SB_DIRSYNC/g' \ -e 's/\<MS_NOATIME\>/SB_NOATIME/g' \ -e 's/\<MS_NODIRATIME\>/SB_NODIRATIME/g' \ -e 's/\<MS_SILENT\>/SB_SILENT/g' \ -e 's/\<MS_POSIXACL\>/SB_POSIXACL/g' \ -e 's/\<MS_KERNMOUNT\>/SB_KERNMOUNT/g' \ -e 's/\<MS_I_VERSION\>/SB_I_VERSION/g' \ -e 's/\<MS_LAZYTIME\>/SB_LAZYTIME/g' \ $list and commit it with something along the lines of 'convert filesystems away from use of MS_... constants' as commit message, it would save a quite a bit of headache next cycle" * 'work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: VFS: Differentiate mount flags (MS_*) from internal superblock flags VFS: Convert sb->s_flags & MS_RDONLY to sb_rdonly(sb) vfs: Add sb_rdonly(sb) to query the MS_RDONLY flag on s_flags
2017-09-09Merge branch 'for-4.14' of ↵Linus Torvalds1-147/+149
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs updates from David Sterba: "The changes range through all types: cleanups, core chagnes, sanity checks, fixes, other user visible changes, detailed list below: - deprecated: user transaction ioctl - mount option ssd does not change allocation alignments - degraded read-write mount is allowed if all the raid profile constraints are met, now based on more accurate check - defrag: do not reset compression afterwards; the NOCOMPRESS flag can be now overriden by defrag - prep work for better extent reference tracking (related to the qgroup slowness with balance) - prep work for compression heuristics - memory allocation reductions (may help latencies on a loaded system) - better accounting for io waiting states - error handling improvements (removed BUGs) - added more sanity checks for shared refs - fix readdir vs pagefault deadlock under some circumstances - fix for 'no-hole' mode, certain combination of compressed and inline extents - send: fix emission of invalid clone operations - fixup file mode if setting acls fail - more fixes from fuzzing - oher cleanups" * 'for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (104 commits) btrfs: submit superblock io with REQ_META and REQ_PRIO btrfs: remove unnecessary memory barrier in btrfs_direct_IO btrfs: remove superfluous chunk_tree argument from btrfs_alloc_dev_extent btrfs: Remove chunk_objectid parameter of btrfs_alloc_dev_extent btrfs: pass fs_info to btrfs_del_root instead of tree_root Btrfs: add one more sanity check for shared ref type Btrfs: remove BUG_ON in __add_tree_block Btrfs: remove BUG() in add_data_reference Btrfs: remove BUG() in print_extent_item Btrfs: remove BUG() in btrfs_extent_inline_ref_size Btrfs: convert to use btrfs_get_extent_inline_ref_type Btrfs: add a helper to retrive extent inline ref type btrfs: scrub: simplify scrub worker initialization btrfs: scrub: clean up division in scrub_find_csum btrfs: scrub: clean up division in __scrub_mark_bitmap btrfs: scrub: use bool for flush_all_writes btrfs: preserve i_mode if __btrfs_set_acl() fails btrfs: Remove extraneous chunk_objectid variable btrfs: Remove chunk_objectid argument from btrfs_make_block_group btrfs: Remove extra parentheses from condition in copy_items() ...
2017-09-07Merge branch 'for-4.14/block' of git://git.kernel.dk/linux-blockLinus Torvalds1-1/+1
Pull block layer updates from Jens Axboe: "This is the first pull request for 4.14, containing most of the code changes. It's a quiet series this round, which I think we needed after the churn of the last few series. This contains: - Fix for a registration race in loop, from Anton Volkov. - Overflow complaint fix from Arnd for DAC960. - Series of drbd changes from the usual suspects. - Conversion of the stec/skd driver to blk-mq. From Bart. - A few BFQ improvements/fixes from Paolo. - CFQ improvement from Ritesh, allowing idling for group idle. - A few fixes found by Dan's smatch, courtesy of Dan. - A warning fixup for a race between changing the IO scheduler and device remova. From David Jeffery. - A few nbd fixes from Josef. - Support for cgroup info in blktrace, from Shaohua. - Also from Shaohua, new features in the null_blk driver to allow it to actually hold data, among other things. - Various corner cases and error handling fixes from Weiping Zhang. - Improvements to the IO stats tracking for blk-mq from me. Can drastically improve performance for fast devices and/or big machines. - Series from Christoph removing bi_bdev as being needed for IO submission, in preparation for nvme multipathing code. - Series from Bart, including various cleanups and fixes for switch fall through case complaints" * 'for-4.14/block' of git://git.kernel.dk/linux-block: (162 commits) kernfs: checking for IS_ERR() instead of NULL drbd: remove BIOSET_NEED_RESCUER flag from drbd_{md_,}io_bio_set drbd: Fix allyesconfig build, fix recent commit drbd: switch from kmalloc() to kmalloc_array() drbd: abort drbd_start_resync if there is no connection drbd: move global variables to drbd namespace and make some static drbd: rename "usermode_helper" to "drbd_usermode_helper" drbd: fix race between handshake and admin disconnect/down drbd: fix potential deadlock when trying to detach during handshake drbd: A single dot should be put into a sequence. drbd: fix rmmod cleanup, remove _all_ debugfs entries drbd: Use setup_timer() instead of init_timer() to simplify the code. drbd: fix potential get_ldev/put_ldev refcount imbalance during attach drbd: new disk-option disable-write-same drbd: Fix resource role for newly created resources in events2 drbd: mark symbols static where possible drbd: Send P_NEG_ACK upon write error in protocol != C drbd: add explicit plugging when submitting batches drbd: change list_for_each_safe to while(list_first_entry_or_null) drbd: introduce drbd_recv_header_maybe_unplug ...
2017-08-24Btrfs: fix blk_status_t/errno confusionOmar Sandoval1-5/+5
This fixes several instances of blk_status_t and bare errno ints being mixed up, some of which are real bugs. In the normal case, 0 matches BLK_STS_OK, so we don't observe any effects of the missing conversion, but in case of errors or passes through the repair/retry paths, the errors get mixed up. The changes were identified using 'sparse', we don't have reports of the buggy behaviour. Fixes: 4e4cbee93d56 ("block: switch bios to blk_status_t") Signed-off-by: Omar Sandoval <osandov@fb.com> Reviewed-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-08-23block: replace bi_bdev with a gendisk pointer and partitions indexChristoph Hellwig1-1/+1
This way we don't need a block_device structure to submit I/O. The block_device has different life time rules from the gendisk and request_queue and is usually only available when the block device node is open. Other callers need to explicitly create one (e.g. the lightnvm passthrough code, or the new nvme multipathing code). For the actual I/O path all that we need is the gendisk, which exists once per block device. But given that the block layer also does partition remapping we additionally need a partition index, which is used for said remapping in generic_make_request. Note that all the block drivers generally want request_queue or sometimes the gendisk, so this removes a layer of indirection all over the stack. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-21btrfs: remove superfluous chunk_tree argument from btrfs_alloc_dev_extentNikolay Borisov1-7/+5
Currently this function is always called with the object id of the root key of the chunk_tree, which is always BTRFS_CHUNK_TREE_OBJECTID. So let's subsume it straight into the function itself. No functional change. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-08-21btrfs: Remove chunk_objectid parameter of btrfs_alloc_dev_extentNikolay Borisov1-4/+4
THe function is always called with chunk_objectid set to BTRFS_FIRST_CHUNK_TREE_OBJECTID. Let's collapse the parameter in the function itself. No functional changes. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-08-21btrfs: Remove extraneous chunk_objectid variableNikolay Borisov1-10/+6
BTRFS_FIRST_CHUNK_TREE_OBJECTIS id the only objectid being used in the chunk_tree. So remove a variable which is always set to that value and collapse its usage in callees which are passed this variable. No functional changes Signed-off-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-08-21btrfs: Remove chunk_objectid argument from btrfs_make_block_groupNikolay Borisov1-3/+1
btrfs_make_block_group is always called with chunk_objectid set to BTRFS_FIRST_CHUNK_TREE_OBJECTID. There's no reason why this behavior will change anytime soon, so let's remove the argument and decrease the cognitive load when reading the code path. No functional change Signed-off-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-08-21btrfs: Remove redundant setting of uuid in btrfs_block_headerNikolay Borisov1-2/+0
btrfs_alloc_dev_extent currently unconditionally sets the uuid in the leaf block header the function is working with. This is unnecessary since this operation is peformed by the core btree handling code (splitting a node, allocating a new btree block etc). So let's remove it. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-08-18btrfs: Remove unused sectorsize variable from struct map_lookupNikolay Borisov1-2/+0
This variable was added in 1abe9b8a138c ("Btrfs: add initial tracepointi support for btrfs"), yet it never really got used, only assigned to. So let's remove it. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-08-18btrfs: use appropriate define for the fsidAnand Jain1-8/+8
Though BTRFS_FSID_SIZE and BTRFS_UUID_SIZE are of the same size, we should use the matching constant for the fsid buffer. Signed-off-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-08-16btrfs: use named constant for bdev blocksizeDavid Sterba1-3/+3
Superblock is read and written using buffer heads, we need to set the bdev blocksize. The magic constant has been hardcoded in several places, so replace it with a named constant. Signed-off-by: David Sterba <dsterba@suse.com>
2017-08-16btrfs: refactor find_device helperDavid Sterba1-6/+13
Polish the helper: * drop underscores, no special meaning here * pass fs_devices, as this is what the API implements * drop noinline, no apparent reason for such simple helper * constify uuid * add comment Signed-off-by: David Sterba <dsterba@suse.com>
2017-08-16btrfs: merge alloc_device helpersDavid Sterba1-25/+11
There are two helpers called in chain from one location, we can merge the functionaliy. Originally, alloc_fs_devices could fill the device uuid randomly if we we didn't give the uuid buffer. This happens for seed devices but the fsid is generated in btrfs_prepare_sprout, so we can remove it. Signed-off-by: David Sterba <dsterba@suse.com>
2017-08-16btrfs: Remove unused parameters from volume.c functionsNikolay Borisov1-5/+2
This also adjusts the respective callers in other files. Those were found with -Wunused-parameter. btrfs_full_stripe_len's mapping_tree - introduced by 53b381b3abeb ("Btrfs: RAID5 and RAID6") but it was never really used even in that commit btrfs_is_parity_mirror's mirror_num - same as above chunk_drange_filter's chunk_offset - introduced by 94e60d5a5c4b ("Btrfs: devid subset filter") and never used. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-08-16btrfs: Remove unused variablesNikolay Borisov1-9/+0
clear_super - usage was removed in commit cea67ab92d3d ("btrfs: clean the old superblocks before freeing the device") but that change forgot to remove the actual variable. max_key - commit 6174d3cb43aa ("Btrfs: remove unused max_key arg from btrfs_search_forward") removed the max_key parameter but it forgot to remove references from callers. stripe_len - this one was added by e06cd3dd7cea ("Btrfs: add validadtion checks for chunk loading") but even then it wasn't used. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-08-16btrfs: Remove find_raid56_stripe_lenNikolay Borisov1-20/+7
find_raid56_stripe_len statically returns SZ_64K which equals BTRFS_STRIPE_LEN. It's sole caller is __btrfs_alloc_chunk and it assigns the return value to ai variable which is already set to BTRFS_STRIPE_LEN. So remove the function invocation altogether and remove the function itself. Also remove the variable since it's only aliasing BTRFS_STRIPE_LEN and use the define directly. Use the occassion to simplify the rounding down of stripe_size now that the value we want it to align is a power of 2. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Qu Wenruo <quwenruo.btrfs@gmx.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-08-16btrfs: Enhance message when a device is missing during mountQu Wenruo1-7/+17
For a missing device, btrfs will just refuse to mount with almost meaningless kernel message like: BTRFS info (device vdb6): disk space caching is enabled BTRFS info (device vdb6): has skinny extents BTRFS error (device vdb6): failed to read the system array: -5 BTRFS error (device vdb6): open_ctree failed This patch will print a new message about the missing device: BTRFS info (device vdb6): disk space caching is enabled BTRFS info (device vdb6): has skinny extents BTRFS warning (device vdb6): devid 2 uuid 80470722-cad2-4b90-b7c3-fee294552f1b is missing BTRFS error (device vdb6): failed to read the system array: -5 BTRFS error (device vdb6): open_ctree failed Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Reviewed-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-08-16btrfs: Cleanup num_tolerated_disk_barrier_failuresQu Wenruo1-17/+0
As we use per-chunk degradable check, the global num_tolerated_disk_barrier_failures is of no use. We can now remove it. Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-08-16btrfs: Introduce a function to check if all chunks a OK for degraded rw mountQu Wenruo1-0/+58
Introduce a new function, btrfs_check_rw_degradable(), to check if all chunks in btrfs is OK for degraded rw mount. It provides the new basis for accurate btrfs mount/remount and even runtime degraded mount check other than old one-size-fit-all method. Btrfs currently uses num_tolerated_disk_barrier_failures to do global check for tolerated missing device. Although the one-size-fit-all solution is quite safe, it's too strict if data and metadata has different duplication level. For example, if one use Single data and RAID1 metadata for 2 disks, it means any missing device will make the fs unable to be degraded mounted. But in fact, some times all single chunks may be in the existing device and in that case, we should allow it to be rw degraded mounted. Such case can be easily reproduced using the following script: # mkfs.btrfs -f -m raid1 -d sing /dev/sdb /dev/sdc # wipefs -f /dev/sdc # mount /dev/sdb -o degraded,rw If using btrfs-debug-tree to check /dev/sdb, one should find that the data chunk is only in sdb, so in fact it should allow degraded mount. This patchset will introduce a new per-chunk degradable check for btrfs, allow above case to succeed, and it's quite small anyway. Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Signed-off-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> [ copied text from cover letter with more details about the problem being solved ] Signed-off-by: David Sterba <dsterba@suse.com>
2017-08-16btrfs: Prevent possible ERR_PTR() dereferenceNikolay Borisov1-10/+12
In btrfs_full_stripe_len/btrfs_is_parity_mirror we have similar code which gets the chunk map for a particular range via get_chunk_map. However, get_chunk_map can return an ERR_PTR value and while the 2 callers do catch this with a WARN_ON they then proceed to indiscriminately dereference the extent map. This of course leads to a crash. Fix the offenders by making the dereference conditional on IS_ERR. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-08-16btrfs: Be explicit about usage of min()Nikolay Borisov1-2/+2
__btrfs_alloc_chunk contains code which boils down to: ndevs = min(ndevs, devs_max) It's conditional upon devs_max not being 0. However, it cannot really be 0 since it's always set to either BTRFS_MAX_DEVS_SYS_CHUNK or BTRFS_MAX_DEVS(fs_info->chunk_root). So eliminate the condition check and use min explicitly. This has no functional changes. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-08-16btrfs: Use explicit round_down call rather than open-coding itNikolay Borisov1-1/+1
No functional changes. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-08-16btrfs: convert while loop to list_for_each_entryNikolay Borisov1-9/+2
No functional changes, just make the loop a bit more readable Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-07-28Merge branch 'for-4.13-part3' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: "Fixes addressing problems reported by users, and there's one more regression fix" * 'for-4.13-part3' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: round down size diff when shrinking/growing device Btrfs: fix early ENOSPC due to delalloc btrfs: fix lockup in find_free_extent with read-only block groups Btrfs: fix dir item validation when replaying xattr deletes
generated by cgit v1.2.3 (git 2.39.0) at 2025-08-31 18:22:16 +0300